Boat Shield Protection The dock bumpers perfectly safeguard your vessel during waves and avoiding boats from damage caused by the massive collision between hard surfaces. It could also be an excellent choice as an anchor buoy. Reinforced Eyelets The boat fender is designed with reinforced eyelets on both ends. It could be instantly hanged with lines either horizontally or vertically. The seamless one-piece construction avoids splitting up and extends service life. Superb Durability The boat bumpers are made of premium vinyl with vertical ribs design to add strength and have good resistance to punctures and tears and do well at UV resistance and gas tightness. Simple Quick to Use Package includes four boat fenders, inflating needle, four ropes, and one hand pump. The fenders are easy to inflate and deflate. One person can quickly inflate all four fenders in 10 minutes without any complicated procedure. There are also four dock ropes for easy suspension. Various Application This boat fenders for docking do an outstanding job at safeguarding your vessel or boat. It is suitable for most small and medium-size boats such as canoe, pontoon, sailboat, etc.

IDEAL PROTECTORDreizack Boat Fenders have a strong cushioning effect to protect boats from damage or scrapes due to severe collisions, especially when boats are docked or hit against other boats accidentally. Soft and smooth surface will not leave any marks on your boat. As a buoy, it is also great to have.. HIGH-QUALITY PVC MATERIALOur Boat Bumpers are rotomolded from marine vinyl,UV and chemical resistant.It protects it from discolouration from salt water or boat cleaners and is waterproof, freeze-proof, oil-proof, elastic, and age-resistant. 3.8mm thicker PVC material and the oval design enhances its shock and abrasion resistance.. DOUBLE HOLE DESIGNDouble hole reinforcement moulding can be hung vertically or horizontally. The boat fenders for docking are convenient to install and disassemble to help you protecting the boat flexibly any time.. PRACTICAL TOOLSOur Inflatable Marine Pontoon Boat Accessories come with 4 x Boat Bumpers for docking, 4 x 38 Nylon Ropes5ft in length, 4 x Inflating Needles, 1 x Storage Bag and 1 x Air Pump. Inflation takes only 35 seconds, it is easy to operate and storage.. WIDE APPLICATIONThis Boat Fender Bumper is perfect for docks, yachts, sailboats, row boats, ski boats, canoes, pontoons, fishing boats, buoys, etc. Dreizack will provide one-year warranty..

Durable and Reliable COOLWAVE inflatable boat fender is made of reinforced PVC fabric, resistance to wear and tear. It provides reliable protection for your watercraft, preventing scratches when docking against hard objects or other boats.. Wide Application Dock bumpers can be easily attached horizontally or vertically, providing flexible and secure installation options. Multiple 6'x14 fenders can be used on boats up to 27ft long, such as PWC, kayaks, fishing boats, and trawler boats.. Easy to Install Use a pump to connect the inflation valve compatible w HR valve adapter for quick inflation and deflation. COOLWAVE boat bumper can be easily installed through the D-rings.. Convenient Storage The included storage bag makes it easy to store and carry the inflatable boat Bumper. You can conveniently pack it away when not in use.. What You Get COOLWAVE 6'x14 Inflatable Boat Fender x1, carry bag x1, repair kit x1, user manual x1pump not included..

The package contains 4x 6.5 inch boat bumpers for docking, 4x the same color boat fender ropes, 1x air pump and needle, 1x storage bag.. Well protection- Keeps your boat from getting scratched and damaged when tied up at the dock and around other boats. Reinforced molded eyelets support the boat bumpers fenders to hang vertically or horizontally, strong enough to withstands everyday usage but feel soft to show no signs of wear.. Easily inflated- If you tired of boat bumpers marine that get flat or deflate, you'll be glad to find these have valves for inflation. You can be in charge of the pressure you desire, very handy to use and take only 50 seconds to inflate.. Rule of size and quantity- A boat fenders inflatable should have 1 inch of diameter for every 4 to 5 foot of boat length. If you are going to be docking in harsh conditions such as an open lake prone to high winds, larger boat fenders is more recommended. Place one docking fender at every 10 foot of waterline, with a minimum of 3 fenders along one side.. Easily storage- You can optionally deflate or inflate to storage all of parts in the bag, fit perfectly under seats or inside storage compartments..

Durable and Soft Dock Bumpers The Dock fender is crafted from marine grade soft lightweight inflatable polyvinyl chloride which resistant to UV, fading, tearing, chalking, splitting or crushing, providing stronger impact resistance for boat to dock bumping and ensuring long-term protection. Superior Protection Boat dock bumpers provides optimal protection against scrape, nick, dent and damage to your boat, a solution to boat docking in windy day The horizontal dock fenders bumpers also safeguard the dock side and edge from bumping. Easy Installation Dock bumpers comes with pre-drill 3 516 inch holes and mounting hardware for secure and permanent mounting to the docks edge and side. Soft Design Marine Dock Bumpers features with strengthening ribs for extra protection, asthetically look and soft on hulls. Fit Type The dock bumper fender measures 16.7 Inch, universal fit for boat docks and swim rafts, great for commercial marinas, personal docks and mounting to the side and edge of dock.

Innovative DesignVITODALA boat fenders adopt an innovative shield shape combined with an anchor-patterned surface,which can absorb and disperse collision forces,delivering reliable cushioning for hulls during docking.The thick edge design disperses impact force over a wider area, expanding the collision protection coverage and providing enhanced defense for your boats against collisions.. Premium EVA Material The boat fenders are constructed from sturdy EVA material, featuring waterproof, shock-resistant, and long-lasting performance. They can withstand collisions, harsh weather conditions, and prolonged sun exposure. Their lightweight design wont compromise your boats maneuverability,simply rinse with water for easy cleaning to extend their service life.. Easy to Use Ready for instant use without inflation.Unlike traditional inflatable boat fenders,VITODALA boat docking bumpers feature an integrated locking system that eliminates the need for knot-tying or complicated lashing. Equipped with a 2m reinforced nylon rope, you can adjust the buckles and rope as needed to hang the boat fender either horizontally or vertically,ensuring a perfect fit for most types of docks and vessels.. Size Quantity GuideThese boat bumpers measure 17.2 inches8.27 inches and are suitable for vessels of all sizes.We recommend adding one extra fender per side for every additional 10 ft of boat length. Normally, boats under 10 ft need 2 fenders per side, boats between 1025 ft need 3 fenders per side.This setup helps to provide comprehensive hull protection.. Wide Range of Applications Our docking boat fenders are specially designed for multiple vessel types, and suitable for yachts, sailing dinghies, bass boats, pontoon boats, pontoon bridge boats, ski boats and fishing boats.These fenders can be either tied to dock pilings or directly mounted on boat sides..

Boat To Boat Protection - Protect Hulls From Dings, Dents, And Scratches At The Sandbar. 25 in. Ball of Extra Durable - 2 mm PVC. Scratch Free - Smooth Soft Finish Won't Damage Your Beautiful Gel Coat. Easily Stowable - Quickly Inflates Deflates Between Uses - Use Standard 12v Pump Or Your Mouth. Multi-Use Between Boat Tie-UPs, Marker, Short-Term Achor Marker, Regatta Marker, etc..

Perfect Protection Boat The inflatable boat bumper provides a cushioned barrier that absorbs impact and prevents your boat from damage caused by collisions with other boats, docks, or other objects in the water.. Easy to install and store The bumper for docking boats can be easily inflated using the manual pump we provide and can be deflated for compact storage when not in use.. Different Design Our boat bumper is circular and has holes on both the top and bottom ends. This design allows for the bumper to be used horizontally or vertically depending on your specific needs.. High-quality Material The inflatable boat bumper with 70.86 Length double-braid nylon fender line is made of high-quality PVC material, which is durable and resistant to wear and tear.. Various Size Options The bumper comes in a variety of sizes to fit different types of 25-35-foot boats, we suggest you use one for every 10 feet of boat length, for boats under 30 feet, deploy no less than three fenders..

STRONG PROTECTION Our boat bumper covers are designed to provide your boat fenders with strong protection that extends their lifespan and safeguards your hull's finish against unsightly scratches and marks. In addition to their durable design, our boat bumper covers are crafted to give your vessel a sleek, timeless look that's sure to impress.. SIZE, PACK COLOR OPTIONS To give you the flexibility you need, we offer our marine fender covers in multiple size, pack, and color options. You can choose from 1, 2, or 4-packs, each with 5 different size options 5 x 14, 6 x 18, 8 x 22, 10 x 26 12 x 34 and two classic colors navy blue or black to perfectly match your boat's style.. PREMIUM MATERIAL We use only high-quality polyester fully drawn yarn to create our marine fender covers. This material is highly elastic, UV-protected, and resistant to both water and abrasion, making it ideal for use in marine environments. Plus, its superior tensile strength ensures that our boat fender covers can withstand the wear and tear of the open water.. CUSTOM FIT Our boat fender covers are designed to fit most cylindrical fender and bumper types. You can rest easy knowing that our boat fender covers will provide a snug and secure fit for your boat fenders, helping to prevent slipping and providing added protection against impacts. Our boat fender covers are easy to install and remove, making them a hassle-free addition to your boating gear.. SIZE CHART Refer to our size chart for accurate sizing. The cover size reflects unstretched fabric and expands to fit larger fenders. Center Hole HTM fenders use more cover length due to their full end-cap design. Twin Eye fenders often leave the ends exposed, so shorter covers fit better. Fits fenders like Taylor Made Big B, Super Gard, Hull-Gard, and Polyform HTM, F, and G series. Double-check your fender size before choosing a cover. When in doubt, size down. Our covers stretch to fit..

HEAVY-DUTY MATERIALInflatable fenders are made of heavy-duty PVC environmentally friendly fabric which is designed to protect your boats,yachts and sailboats from bad docks, weathering wind, waves and storms.The fabric protects them against oil, petrol and U.V,it can well increase the elasticity and corrosion resistance of fenders. CONSTRUCTIONCome with high quality valve and 2 stainless steel D-rings glued at both ends.Up to 10X stronger than your standard vinyl fenders.Lightweight, extremely durable and requiring minimal storage space.and quickly inflated and deflated whenever they neededIn order to meet the customers trouble of accessories,we also provide a nylon dock line,a valve adapter connector nozzles and a fix or update valve handle for inflatable fenders from the original manufacturer. EASY TO USEThey can be quickly inflated by using any standard or electric pump and easily mounted.simple to use and when deflated can be stowed in small lockers.18 Diameter fenders are the solution for yachts in need of suitable fenders. USEAGEUse them to traverse locks, raft up with other boats, on an end dock when you aren't able to get the good slips when cruising out of your home waters, or just as your everyday fenders, and many other uses. Requires minimal storage space. 100 SATISFACTION GUARANTEEInflatable fenders can reduce the collision energy between boat to boat and boat to dock reduce the collision energy between boat to boat and boat to dockthese heavy and durable inflatable fenders are guaranteed to remain as good as new for a very long time.However, if it does not make pleasure with your purchase for any reason,please contact us,100 satisfaction guarantee.

DURABLE MATERIAL - Made from high quality marine-grade UV-resistant PVC, effectively preventing attrition and collision Last more than 3 years. BUFFER PROTECTION - Inflatable fenders feature great buffer effect, protecting boats and docks from damage caused by heavy collision between hard surfaces. SCIENTIFIC DESIGN - Designed with reinforced eyelets on both ends, it can be hung with lines vertically or horizontally Vertical ribs design adds strength and minimizes roll for puncture- and tear-resistance. FENDER KIT - The set includes 4-pack 8.5''x27'' fenders, 4-pack 5.2' rope 38 diameter, 4 inflating needles and a pump to inflate so you dont need anything else to set it up. EASY TO USE - The fender fits for boat size 29-12ft to 35-38ft, easy to install and take off, ideal for boats, docks, yachts, sailboats, row boats, etc.

Wide ApplicationsProvides 25in x 6.8in of boat bumpers for your boat to docking, fit under 25 feet sizes small boats such as most bass boats, pontoon boats, ski boats, jon boats, small fishing boats, and bow riders with low freeboards, will benefit from a set of compact fendersNote Recommend using two bumpers for jet ski or use one bumper every 10 feet on the boat.. Perfect FitThe boat dock bumpers are composed of two parts, one big and one small. It has a wide range of flexibility in use, and can perfectly fit the radian of different parts of your boat and prevent scratches when docked. Trust in our fenders to safeguard the longevity and pristine condition of your beloved watercraft.. Well ProtectionThe boat bumpers for docking are made of high-impact closed-cell foam, which is thick, durable, impact-resistant, and has a certain degree of elasticity, providing better protection than ordinary conventional fenders, safe, and will not leak.. Easy to UseUse the attached rope to pass through the hole of the boat fenders to hang the boat fenders and firmly fix it at the appropriate position on the boat. The enough long rope can adjust various positions and provide all-around protection.. Easy to Storage Compactly Why Choose UsBoat bumpers sizes are compatible with various types of motorboat front hatches. At KEMIMOTO, we fully stand behind our boat fenders..

PERMANENT, BOTH BOAT DOCK PROTECTION Say goodbye to tangling and constantly adjusting traditional hanging boat fenders. These permanent dock bumpers mount directly to your dock edge, creating a reliable, continuous barrier that protects your boat hull and dock structure from costly collision damage in any tide or current.. 5MM THICK MARINE-GRADE PVC Engineered for extreme durability, these boat bumpers for docking are made from premium 5mm high-density PVC with reinforced ribs. The UV-resistant and corrosion-resistant material withstands harsh saltwater environments and temperature changes without hardening or cracking, ensuring year-round defense.. COMPLETE STAINLESS STEEL HARDWARE KIT We include everything you need for a secure installation right out of the box. Each 2-pack comes with 8 premium stainless steel screws and washers. Mount them permanently to either wood or metal dock surfaces without worrying about rust or buying extra hardware.. EASY 3-STEP INSTALLATION Setup is simple our boat bumpers have all been pre-inflated. But if the inflation is still insufficient, please proceed to just inflate the bumpers using a standard needle valve air pump and needles not included, position them on your dock edge, and secure them with the provided screws. The ergonomic curved arc contour gently guides your vessel into the slip, minimizing friction.. UNIVERSAL FIT SIZING GUIDE Measuring exactly 15.4 x 6.5 x 5.3 inflated, these dock edge bumpers fit perfectly on both floating and stationary docks. Planning your setup We recommend 2 pieces for docks under 10 feet, 3-4 pieces for 10-30 feet, 5-6 pieces for 30-50 feet, and 6 pieces for docks over 50 feet..

Durable MaterialThe boat bumpers are made of premium vinyl with vertical ribs design to add strength and have good resistance to punctures and tears and do well at UV resistance and gas tightness.The marine bumper is made of marine grade PVC material, which has obvious anti-collision, anti-corrosion and UV protection effects, maximising the durability and reliability of the fenders for long-lasting use.. Easy to UseThe fenders are easy to inflate and deflate. Designed with reinforced eyelets on both ends, it can be hung with lines vertically or horizontally. Designed with vertical ribs, add protection strength.. Well ProtectionThe boat fenders are ribbed on all sides to enhance strength and friction and resist wear and tear. Reinforced molded eyelets support the pontoon boat fenders to hang vertically or horizontally, strong enough to withstand everyday usage but soft enough to show no signs of wear.. Easy InstallationPackage includes four boat fenders, inflating needle, four ropes, and one hand pump. The fenders are easy to inflate and deflate.There are also four dock ropes for easy suspension.. Easy to StorageYou can optionally deflate or inflate all parts, fitting perfectly under seats or inside storage compartments..

ENHANCED PROTECTION Double-molded ends resist ripping and tearing, offering unparalleled protection during docking and mooring, ensuring your vessel remains shielded in turbulent conditions. STABILITY RELIABILITY This boat fender is ideal for boats ranging from 25 to 35 feet long. The ribbed design minimizes roll, providing stability and reliability in challenging maritime environments. VIBRANT APPEARANCE Patented True Color technology maintains a deeper, richer color, enhancing the aesthetic appeal of your boat while withstanding harsh marine elements for long-lasting vibrancy. VERSATILE HANGING OPTIONS Featuring a 58 double eyelet configuration, the Super Gard allows for vertical or horizontal hanging, providing versatile functionality tailored to the specific needs of your vessel. HASSLE-FREE MAINTENANCE The rubber football needle inflation valve of these boat fenders enables easy inflation to 2 psi, ensuring seamless setup and maintenance for a hassle-free boating experience.

Superior Impact AbsorptionProtection Constructed from high-quality EVA foam, NICEMER fenders feature an extended contact surface with an integrated anti-slip pattern. This design significantly expands the buffer zone and effectively disperses impact force, ensuring the fender stays securely in place while delivering maximum protection for your boat. Patent protected. High QualityDurability Constructed from high-density EVA marine-grade foam, this fender offers superior UV and saltwater resistance for long-lasting durability. Unlike inflatable fenders, its solid, puncture-proof build eliminates deflation risks and performs reliably in extreme heat or freezing conditions.. Easy to UseInstall Effortless to install and use, the NICEMER boat bumper features an integrated automatic locking system with an extra-long strap for quick, tool-free attachment to docks or decksno complex knots, ropes, or hassle.. Universal Compatibility NICEMER boat bumper is suitable for various types of boats, such as yachts, sailing dinghies, bass boats, pontoon boats, ski boats, and fishing boats. We recommend choosing the number of fenders based on the boat size to provide better protection.. EVA boat fender size Suitable for boats betwwen15 and 25 feet long, we suggest you use one for every 10 feet of boat length, for boats between 15 and 25 feet then need two fenders, for boats under 30 feet, at least three fenders..

Innovative Product The Boat fender boasts a sleek, streamlined exterior design inspired by fashionable sports cars. These boat dock bumpers are made from sturdy and environmental EVA material, providing excellent impact resistance and ensuring safety and reliability during docking. Patents pending.. Easy installation Unlike traditional inflatable boat fenders that require knots, AWEMUFA Boat Fender innovative design makes it easy to install without knots, and the wedge-shaped design prevents bouncing during use, ensuring the fender stays in place.. Integrated locking system Our extra-long straps are not only easy to use but also have an integrated automatic locking system that securely fastens the fender to the dock or deck without the need for complicated knots.. Suitable size The AWEMUFA boat fenders measured as 17.12 inches 8.27 inches. To get the best protection, we recommend adding a fender for every 10 feet of boat length. For boats under 30 feet, at least three fenders are needed. AWEMUFA boat bumper is suitable for various types of boats, such as yachts, sailing dinghies, bass boats, pontoon boats, bridge slide boats, ski boats, and fishing boats. We recommend choosing the number of fenders based on the boat size to provide better protection.. After-sales service AWEMUFA's excellent and innovative quality continuously drives our development, and our perfect service guarantees customer satisfaction. We promise to provide excellent service for every buyer. If you encounter any problems while using our products, please let us know immediately and we will do our best to solve them immediately..

HIGH-STRENGTH MATERIAL Our fender is made of 1280D marine-grade PVC, ensuring durable quality. Crafted to safeguard the watercraft such as your valuable boats, yachts, and sailboats. Resistant to abrasion and tears. PREMIUM MOORING BUMPER Equipped with stainless steel D-ring and 8mm thick boat rope at each end for easy connection. These inflatable fenders not only address docking and tie-up concerns but also make hooking up with your friends much simpler. QUICK INFLATION AND DEFLATION Effortlessly inflate and deflate with our quick inflation valve and electric pump. Designed for rapid inflation, our powerful electric air pump is compatible with AC 110120V sockets, ensuring efficient performance every time.. COMPACT STORAGE Sized at 10ft18in, suitable for small and medium-sized boats, easy to store, and comes with a lightweight storage bag. COMPLETE SET Includes two ropes, an electric pump, a repair kit, and a storage bag.

Versatile Protection Safeguard your boat with vancus boat fenders, designed to protect various types of boats from collisions and abrasions during docking and pontoon mooring. High Quality Material Our boat bumpers are made of high-quality marine grade UV-resistant PVC the Inflatable boat fender comes with ribbed on all sides for extra protection, increase friction, and resist abrasion for the boat. Double Hole Design Double hole reinforcement moulding can be hung vertically or horizontally. The boat fenders for docking are convenient to install and disassemble to help you protecting the boat flexibly any time. What You Get 4 Pack boat fender4.5'' x16'', 4 fender lines6.5ft in length, 4 inflating needles and 1 hand pump, inflate or deflate your boat buoys bumper in minutes, no extra tools needed, available whiteblackblue boat bumpers for docking fenders. Wide ApplicationThis Boat Fenders Bumper is perfect for docks, yachts, sailboats, row boats, pontoons, ski boats, canoes, fishing boats, buoys, etc. Our will provide one-year warranty.

GREAT FOR BOAT PROTECTION ACWYENN inflatable boat fender offers great boat protection when tying up to other boats or dock. Inflatable boat fenders can prevent scratches between boats and docks, providing superior protection for your valuable boats, pontoons, yachts and jet ski. AVAILABLE IN 3 SIZES We have 3 sizes of 6'x14, 10'x18 and 10'x24 for you to choose. Our boat fender is made of heavy-duty PVC material, ensuring durable quality and long-term use. EASY TO USE Quick inflation and deflation with a pump pump is not included. Equipped with 2 stainless steel D-rings at each end and 2 mooring ropes for easy connection between boats and docks. LIGHTWEIGHT AND COMPACT They are much lighter than traditional solid fenders, reducing weight on the boat and making them easier to handle. When deflated, inflatable fenders take up minimal storage space, making them easy to store and carry. WHAT YOU WILL GET Inflatable boat fender, 2 mooring ropes, carry bag, repair kit, user manual.

Perfect Protection Boat The inflatable boat bumper provides a cushioned barrier that absorbs impact and prevents your boat from damage caused by collisions with other boats, docks, or other objects in the water.. Easy to install and store The bumper for docking boats can be easily inflated using the manual pump we provide and can be deflated for compact storage when not in use.. Different Design Our boat bumper is circular and has holes on both the top and bottom ends. This design allows for the bumper to be used horizontally or vertically depending on your specific needs.. High-quality Material The inflatable boat bumper with 70.86 Length double-braid nylon fender line is made of high-quality PVC material, which is durable and resistant to wear and tear.. Various Size Options The bumper comes in a variety of sizes to fit different types of 25-35-foot boats, we suggest you use one for every 10 feet of boat length, for boats under 30 feet, deploy no less than three fenders..

Patent Product The ergonomic design and environmentally materials make our boat bumpers are different. As an additional safeguard against wear we add the reinforced nylon ropes with a fix buckle, the lock parts offering more protection and durability than traditional fenders, especially in stormy weather.. Strong Protection Molded in a cross-linked closed-cell foam that is extremely durable, it wont degrade during prolonged exposure to the sun. Extra-long strap easy to loop over higher attachment locations, the dock bumpers will keeps your boat from getting scratched and damaged when tied up at the dock and around other boats.. Fast Installation An integrated strap easily attaches to boat dock, just attach and lock. Locks will facilitate the rapid installation of your fenders.. Size Choosing kemimoto boat fender size 17in length 8in dia. Intended for use with boats 15-25 feet long, we suggest you use one for every 10 feet of boat length, for boats under 30 feet, deploy no less than three fenders.. Wide Applications Kemimoto boat bumpers will be a good fit for most bass boat, pantoon boat, ski boat, jon boats, small fishing boat and bow rider with low freeboards, will benefit from a set of compact fenders, as they are designed to protect the gunwale as well as the hull..

PRECISION FIT FOR PWCS Engineered to match the curves of modern watercraft, these PWC fenders hug the body of your jet ski to deliver targeted impact protection while docking or tying up alongside other watercraft. SECURE DOCKSIDE PROTECTION Designed to grip the rub rail, these jet ski bumpers for docking stay firmly in place to protect against dock impact, scratches, and contact with nearby boats at marinas, sandbars, and crowded docks. KNOTLESS QUICK DEPLOYMENT Featuring an integrated DRYLINE attachment system, these jet ski fenders install in seconds without knots, making it easy to adjust placement or deploy protection quickly when approaching the dock. MARINE GRADE FOAM DEFENSE Built from durable non marking closed cell foam, these dock bumpers absorb impact while resisting UV exposure and water damage, helping keep your PWCs finish clean and protected. SLEEK MODERN DESIGN Unlike bulky boat bumpers, Ronin fenders feature a compact profile and premium aesthetic that complements todays PWCs while nesting together neatly for convenient onboard storage.

Durable, dependable Marine Grade vinyl fenders are Roto-molded for superior strength, cushioning, and high-gloss finish. Premium-quality ribbed material ensures softness. Valve plug housing is molded into fender, and valve is recessed to prevent valve lug from pulling away from fender. Heavy-duty integral lugs for longer durability Roto-molded for even wall thickness. Includes pair of 38-inch x 5-foot double-braided MFP fender lines each line has reinforced nylon mesh loop on one end. Sold in sets of 2 fenders, black fenders measure 5 inches x 20 inches. Intended for use with boats 15-20 feet long. Manufacturer part number 50-79261.

FOR BOATS UP TO 21 Experience the perfect solution for boats up to 21' in size with our versatile set of fenders. Whether you have a larger boat seeking enhanced protection or a smaller vessel in need of an extra layer of security, these fenders are designed to meet your needs.. INCLUDES TWO FENDER LINES AND PUMP each bumper set includes two 6' long fender lines, ensuring easy hanging in any situation and a complimentary sports ball pump, allowing you to effortlessly inflate the boat fenders.. CAN BE HUNG VERTICALLY AND HORIZONTALLY Versatile in design, these bumpers can be hung either horizontally or vertically, adapting to your specific needs.. SUPER SOFT MARINE VINYL Crafted from premium marine vinyl, these boat fenders offer optimal protection without leaving any marks on your vessel, even in the most challenging conditions..

The package contains 4x 8.5 inch boat bumpers for docking, 4x the same color boat fender ropes, 1x air pump and needle, 1x storage bag.. Well protection- Keeps your boat from getting scratched and damaged when tied up at the dock and around other boats. Reinforced molded eyelets support the boat bumpers fenders to hang vertically or horizontally, strong enough to withstands everyday usage but feel soft to show no signs of wear.. Easily inflated- If you tired of boat bumpers marine that get flat or deflate, you'll be glad to find these have valves for inflation. You can be in charge of the pressure you desire, very handy to use and take less than 2 minutes to inflate.. Rule of size and quantity- A boat fenders inflatable should have 1 inch of diameter for every 4 to 5 foot of boat length. If you are going to be docking in harsh conditions such as an open lake prone to high winds, larger boat fenders is more recommended. Place one docking fender at every 10 foot of waterline, with a minimum of 3 fenders along one side.. Easily storage- You can optionally deflate or inflate to storage all of parts in the bag, fit perfectly under seats or inside storage compartments..

Versatile SizingOur jet ski bumpers are available in two distinct sizes to accommodate a variety of motorboats and small boats under 15 feet in length. For optimal protection, we recommend using two bumpers on a jet ski or one bumper every 10 feet on larger boats. Tailored DesignThese PWC fenders are uniquely composed of two segmentsa larger and a smaller oneallowing for exceptional adaptability and a perfect fit along the contours of your jet ski. This design ensures comprehensive protection against scratches and impacts during docking. Superior ProtectionCrafted from high-impact closed-cell foam, our jet ski fenders offer enhanced durability and resistance against impacts. The materials elasticity helps absorb shocks effectively, outperforming standard fenders to keep your watercraft safe and intact. Hassle-Free InstallationEach pwc bumper comes equipped with a long, durable rope designed to easily thread through a designated hole, allowing you to securely attach and adjust the fender on your jet ski or boat. This setup provides reliable, all-around protection without complications. Convenient Storage Trusted SupportOur compact jet ski bumpers are designed to fit effortlessly within the front hatches of various motorboat types, ensuring easy storage when not in use. At KEMIMOTO, your satisfaction is our priority. Should you have any concerns with our products, we will provide effective assistance..

Effortless to Storage We provide a 110-120V 600W electric pump makes the boat fender incredibly easy to inflate deflates, and folds down to a compact size for superior ease of transportation and storage. More convenience to use and saving your time.. Exclusive Design FBSPORT inflatable boat bumper constructed with exclusive anti-collision strip on double sides, keeps your boat from getting scratched and damaged. Made from UV resistant high pressure layered PVC drop stitch for anti collision and puncture prevention.. Built to Last Our inflatable boat bumper features reinforced stainless steel D-rings for quick tethering to docks, boats, or anchors. Handles and D-ring allows to hang the fender vertically or horizontally, and easy moving.. Multifunctional Design Our inflatable boat fender is not just a boat fender for docking, suitable for a variety of boat sizes, such as cabin cruiser, jet boat, wake boats, fishing soats, speed boat. Boat bumpers fenders also can be used as a floating dock lounging on water with your friends.. Various Size Option Sizes from 60 to 118 long, 17.7 wide for all your docking needs. Package included 1x Inflatable Boat Fender, 1x Electric Inflatable Pump, 1x Carry Bag, 2x Cord.

Inflatable fender protects hull and topsides. Recommended for boats 10-20 feet in length. Constructed of soft, yet super strong marine grade vinyl. Size 4- inch x 16 inch. Eye Diameter 12 inch. Manufacturer part number 50-79001.

EXTRA PROTECTION. These rubber bumper strips increase protection on your delivery van, work truck and a variety of commercial vehicles, as well as trailers. TOUGH RUBBER. The rear bumper protector rubber is a tough black rubber to withstand bumps and abrasions from a loading dock, guard rail or pylon. VERSATILE. These rubber bumper guards are great for protecting the rear bumper, front bumper, rear step and sides. UNIVERSAL FIT. These rubber bumper protectors are 2-18 inches x 1-78 inches x 10 inches. They perfectly fits the LUVERNE Impact shock-absorbing rear bumper step, or they can be mounted anywhere needed. HARDWARE NOT INCLUDED. The two holes in each bumper come ready to accept 14-inch hardware included. Drilling may be needed on the mounting surface.

For Different Vessels Our boat fenders are designed to fit boats of different sizes. For boats up to 16ft, choose the 5.5-inch width. For those measuring 16-26ft, the 6.5-inch option is ideal, while the 8.5-inch fender best serves 26-36ft boats. The boat bumper provides optimal protection, whether for vessels or docks and also serves as an effective marine warning buoy.. Built to Last Crafted from high-grade PVC, our boat fenders for docking boast a 3.8 mm wall thickness to prevent air leakage and withstand strong impacts. The boat buoy bumpers also resist UV light and minimize the risk of cracking or aging, even after prolonged exposure.. Quick and Easy Inflation With an air pump and needles included, these boat bumpers for docking 4 packs have been thoroughly tested for quality assurance and enable rapid inflation. The pump's compact design, measuring only 11 inches, makes it portable and convenient for on-the-go inflation.. Versatile or Horizontal Options Thanks to the double-hole design at both fenders' ends and 4 pieces of sturdy 5.9 ft polypropylene rope, these boat fenders can be hung vertically or horizontally. These ropes resist twisting, rotating, or knotting, ensuring long-lasting and wear-resistant use.. All-Inclusive Accessories Your purchase includes all necessary tools for immediate use a pump, 4 x air needles, 4 x 5.9 ft polypropylene ropes, and a storage bag. The storage bag, crafted from durable Oxford cloth and breathable mesh, allows for easy storage and transport, keeping your boat bumpers protected and ready for use..

Manufactured from the best quality marine grade vinyl. Superior strength, cushioning and a high gloss finish. Measures 5.5 X 20. Fenders include an inflation valve to allow for adjustment for the desired level of firmness. Reinforced heavy-duty integral lugs for added strength and longer durability.

DURABLE MARINE-GRADE PVC MATERIALOur ribbed boat fenders for docking are made of high-quality, UV-resistant marine-grade PVC. The seamless one-piece construction and all-around ribbed design provide extra protection against abrasion, impact, and harsh weather, ensuring long-lasting durability in saltwater environments.. EFFECTIVE SHOCK ABSORPTIONThese inflatable ribbed boat bumpers 4 pack deliver superior cushioning, effectively protecting your boat and dock from damage caused by collisions, scraping, and impacts between hard surfaces. The reinforced dual eyelets design enhances stability and impact distribution.. VERSATILE HANGING DESIGNFeaturing reinforced dual eyelets integrated into the body, these boat fenders can be hung vertically or horizontally for flexible docking protection. The ergonomic design ensures a secure attachment to your boat, preventing slippage and offering reliable coverage.. COMPLETE 4-PACK FENDER KITEach set includes 4 ribbed boat fenders 4.6 x 16, 4 inflating needles, 4 durable fender ropes 5ft length, and 1 hand pump. Available in multiple colors blackbluebluewhiteorangeblack to match your boat's style.. MULTI-USE WIDE COMPATIBILITYPerfect for protecting docks, yachts, sailboats, row boats, ski boats, canoes, pontoons, fishing boats, and buoys. Ideal for both recreational and commercial marine use, offering reliable protection in various docking and mooring scenarios..

FOR BOATS UP TO 40 Experience the perfect solution for boats up to 40' in size with our versatile set of fenders. Whether you have a larger boat seeking enhanced protection or a smaller vessel in need of an extra layer of security, these fenders are designed to meet your needs.. INCLUDES TWO FENDER LINES AND PUMP This comprehensive package includes two fender lines and a convenient pump, ensuring you have all the essentials for a hassle-free setup.. CAN BE HUNG VERTICALLY AND HORIZONTALLY With the ability to be hung vertically or horizontally, these fenders offer remarkable versatility. Whether you require dock protection or need to raft with other boats, these fenders have got you covered.. SUPER SOFT MARINE VINYL Crafted from premium marine vinyl, these fenders provide a super soft touch while ensuring a non-abrasive and non-marking experience for your boat's surface.. DURABLE Rest assured knowing that these fenders are built to withstand the elements. The vertical ribs and reinforced tube ends deliver exceptional strength, guaranteeing their durability in any situation..

Marine-Grade Rubber Fender Boat bumpers for docking feature an additional layer of marine-grade, high-elasticity rubber fender for dual-layer protection. Install with the rubber side of dock bumpers facing outward to maximize shock absorption and puncture resistance, guarding against sharp dock edges or rough surfaces.. Quick Inflation Deflation Boat dock bumpers include a 600W high-efficiency electric pump and a sealed air valve for fast, effortless inflation. Compact when deflated, with a portable storage bag for easy transport and space-saving storage, ideal for daily use or long voyages.. Reliable Impact Protection Made of thickened PVC material for enhanced durability and shock absorption, the boat fender effectively safeguarding the hull from scratches and damage. Reliable cushioning against dock impacts, wave shocks, or contact with other vessels. UV-resistant surface prevents aging, suitable for various water environments.. Dual Horizontal Vertical Modes Choose between horizontal or vertical hanging based on docking needs. Horizontal mode offers broad surface coverage, ideal for berthing at docks, while vertical mode provides precise protection for critical areas like the bow and stern. Equipped with 180 rotatable stainless steel D-rings and high-strength fixing ropes to ensure secure, stable positioning.. Wide Compatibility Boat fenders for docking are Designed for various watercraft, including yachts, sailboats, fishing boats, and inflatable floats. Its versatile fit and high-visibility colors deliver professional-grade impact protection while enhancing nighttime navigation safety, ensuring worry-free voyages..

Complete Docking Set our package includes 4 pieces of boat bumpers for docking 6.5 x 23 inches, 4 boat bumper clips, 4 ropes, 1 pump, and 4 needles, enough quantity and good combinations to equip you for a safe and enjoyable boating experience, and you can inflate and deflate easily. Quality Material made from durable PVC material, these boat fenders are reliable and reusable, UV protection gives the boat bumper more power to withstand harsh weather, not easy to break or fade The boat fender hangers are made of ABS plastic, sturdy and durable, which can better adapted to the complex climate environment at sea They offer robust and long lasting protection which makes them a trusted choice for boat owners. Reinforced Twin Eyelets Design the added sturdiness of the reinforced twin eyelets design allows the inflatable boat fender to withstand high forces, you can hang the bumpers vertically or horizontally with the two eyelets according to your needs This feature ensures they stay securely in place, providing maximum protection against unexpected impacts during docking, making them a reliable choice for safeguarding your boat, suitable for boats from 20 to 30 feet long. Protect Your Boat boat fender bumpers are suitable for protecting your boat from bumping and rubbing up against other boats and docks, they act like reliable cushions against unwanted rubbing, marking, scraping, or damaging the boat's surface You can use the rope to pass through the hole in the pontoon bumper clips and then punches a knot at the end to prevent the fender from slipping off accidentally and losing the fender. Versatile and Multifunctional these boat bumpers are designed for versatility, suitable for different docking circumstances, they can be tied to the side of the boats, pontoons, buoys to prevent damage from other boats, jetty or dock, these fenders offer the right protection while maintaining the look of your boat More importantly, it can also be applied as a survival tool.

Concept Boat fender clips make bumper adjustments easier and faster, allowing pontoon boats to dock in any position. These pontoon fender clips are dedicated to provide reliable convenience for your journey. Specifications Pontoon clips are designed to clamp on 1 inch and 1.25 inch square tube rails securely. They can be repositioned quickly, which solve the problem of lashing and unfastening fender lines constantly. Applicable Suitable for 14 to 38 inch fender lines, the height of the boat bumpers can be adjusted easily, and the boat fenders can be fixed firmly by pressing the rope into the groove of the boat bumper clips after determining the height of the boat bumpers for docking. Material The pontoon clips for bumper constructed from eximious ABS material are durable and will not scratch your boat rails. The surface of boat fender hangers are smooth and don't worry about scratching your sofa on your pontoon boat. Attributes Contains 4 gray fender clips for pontoon boats. A structural design that balances convenience and durability, allowing for long term use with just one possession.

LONG-LASTING MATERIAL Ribbed boat fenders for docking bumpers is made of high quality grade UV-resistant PVC, the marine ribbed Inflatable Fender comes with ribbed on all sides for extra protection.. FEATURES Inflatable ribbed boat fenders 4 pack feature great buffer effect, the twin eyes boat fender help to protect boats and dock from damage caused by the heavy collision between hard surfaces.. SCIENTIFIC DESIGN Inflatable ribbed marine fenders eyelets is integrated with the body, boat bumper 4 pack can hung vertically or horizontally, help the boat bumpers fenders attach to boat firmly.. WHAT YOU GET 4 Pack ribbed boat fenders 4.5'' x 16'' boat fenders, 4 inflating needles, 4 fender ropes 6.5ft length and 1 hand pump, available whiteblackblue boat bumpers for docking 4 pack black. MULTI USAGEThis Boat Fender Bumper is perfect for docks, yachts, sailboats, row boats, ski boats, canoes, pontoons, fishing boats, buoys, etc..

Warranty and package- FBA Prime shipping. Two years warranty offered by Affordura boat fender. The package contains 4x 5.5 inch boat bumpers for docking, 4x the same color boat fender ropes, 1x air pump and needle, 1x storage bag.. Well protection- Keeps your boat from getting scratched and damaged when tied up at the dock and around other boats. Reinforced molded eyelets support the boat bumpers fenders to hang vertically or horizontally, strong enough to withstands everyday usage but feel soft to show no signs of wear.. Easily inflated- If you tired of boat bumpers marine that get flat or deflate, you'll be glad to find these have valves for inflation. You can be in charge of the pressure you desire, very handy to use and take only 35 seconds to inflate.. Rule of size and quantity- A boat fenders inflatable should have 1 inch of diameter for every 4 to 5 foot of boat length. If you are going to be docking in harsh conditions such as an open lake prone to high winds, larger boat fenders is more recommended. Place one docking fender at every 10 foot of waterline, with a minimum of 3 fenders along one side.. Easily storage- You can optionally deflate or inflate to storage all of parts in the bag, fit perfectly under seats or inside storage compartments..

Protect Your Investment Guard your boat from the docks, pilings, and other boats with BISupply 2-Pack Pontoon Bumpers Boat hull bumpers fit 19 to 31-foot 5.8 to 9.5m boats. Made to Last 22.8 by 7.8-inch 57.9 x 19.8cm pontoon boat bumpers are made of high-quality, ribbed PVC matting for enhanced strength PVC material helps make boat bumper pontoon pads easy to clean to avoid gunk build-up Boat dock bumpers are 3mm thick to help protect against punctures and wear. Buffer Collisions Shield your boat with large boat fenders bumpers 2 pack to help prevent damage from docking or hitting another boat when pulling into your slip Place boat bumpers fenders pads slightly above water to deter build-up Install boat bumpers 2 pack at widest part of hull and at the stern. Easy to Attach Boat bumper guards come with 12-inch 30.5cm inflator pump with 1 replacement sports needle Lubricate needle to help prevent damage to valve Avoid over-inflating boat docking pads. Complete Kit The boat bumper set includes 0.4-inch by 5 feet 1cm x 1.5m rope, 2 sports needles, 1 inflator pump, and 2 boat dock bumper guards.

MAINTENANCE-FREE EVA FOAMCrafted from marine-grade EVA foam, these boat bumpers fenders need no inflation. Permanently buoyant and resistant to UV, saltwater, and oil, this material won't fade or crack. Unlike traditional inflatable options, it provides reliable, zero-maintenance protection without deflation risks.. INTEGRATED LOCKING SYSTEMThese boat fenders for docking feature a patented integrated locking system with automatic buckle for tool-free installation. The durable strap secures instantly to pilings or cleatsno knots needed. This modular dock bumper allows easy on-the-spot adjustment via the locking structure.. ENHANCED IMPACT ABSORPTIONThe reinforced multi-grid backing absorbs and evenly distributes collision force. This design provides superior cushioning compared to standard smooth-back boat dock bumpers, effectively protecting your hull and gunwale from scratches and dents caused by dock contact.. IDEAL SIZE FOR WATERCRAFTAt 17x8x4.3, these boat bumpers for docking fit various vessels. For optimal coverage use 2 for boats under 10ft, 3 for 10-20ft, add one per additional 10ft. This sizing ensures tailored protection for your specific watercraft with the right number of dock defenders.. VERSATILE INSTALLATIONThese yacht fender eva fender units include multi-strand elastic ropes and a sturdy threading buckle. This combination enables secure fastening to any dock edge or deck configuration. Whether for pontoon or bass boat, these boat fenders offer flexible options as reliable dock bumpers..

RELIABLE WEAR-RESISTANTMade from 1280D marine-grade PVC, these boat bumpers offer strong protection. They stop direct contact with hard surfaces, keeping your boat safe from scratches and damage while moving through waters with floating debris. EXCELLENT PRESSURE RESISTANCEThese boat fenders can handle extreme temperatures and tough weather. Once inflated, they act as a cushion, providing strong protection when docking at marinas or meeting other boats. CONNECTION SECURITYWith four stainless steel D-rings and four mooring ropes, these inflatable pontoon make sure the fenders stay in place. The D-rings and ropes work together to keep the dock fenders secured, making docking and tying up your boat easier and safer. CONVENIENT STORAGE Measuring 12018, these boat fenders for docking come with a black Oxford storage bag and a deflation valve. When not in use, simply deflate and fold them for easy storage in most boat compartments, saving space on board. QUICK AND EASY SETUPDesigned with an air valve, these boat bumpers for docking work with 12V air pumps for fast inflation. Whether docking or getting ready to use them, these large boat bumpers accessories are easy to set up, providing reliable protection for your boat.

Pontoon boat bumper clips are designed to help you adjust the position of the fenders easily and quickly to adapt unfamiliar docking scenes. With efficiency and convenience in mind, by using pontoon boat fender clips, you can place the fenders on the desired bumper position quickly and easily. When you need to retract the fenders, just take off the boat bumper hangers.. The pontoon fender clips are designed to clamp on 1 and 1.25 square tube rails securely and fit on most pontoon boat bumpers for docking. This pontoon fender hangers can slide along the bumper that reposition pontoon bumpers quickly where you need, solving the problem of lashing and unfastening the fender lines constantly.. To better work with boat fenders for docking, boat fender clips made of high-quality ABS polymer structural material have higher strength and better toughness, and the special addition of anti ultraviolet factor also makes the boat bumper clips have a longer service life. The surface of pontoon clips are smooth that won't scratch your bumpers and sofas on the pontoon boat when sliding.. The boat fender hangers are suitable for mooring ropes up to 38, which is a common size for most pontoon boat owners, and can adjust the height of the fenders easily. The rope passes through the hole in the pontoon bumper clips and then punches a knot at the end to prevent the fender from slipping off accidentally and losing the fender.. Contains 4 grey pontoon boat clips. With the help of the pontoon rail fender hanger, you can dock to different docks or hang out with friends' boats easily when partying in the lake. If you receive a defective product, please contact us in time to provide you with a 100 exchange or refund service..

Versatile Usage These dock bumpers are designed for a wide range of applications, making them ideal for use on docks, jet skis and boats up to 25 feet in length. They can function effectively as both dock bumpers and boat fenders, providing comprehensive protection.. Innovative Two-Part Design Dock corner bumpers engineered with a unique two-part design consisting of one large and one small component, these bumpers offer flexible use and ensure a seamless fit to either the boat or dock. This enhances both protection and stability, making them highly adaptable to different scenarios.. Sturdy Construction PWC Fenders crafted from high-impact closed-cell foam, these bumpers are exceptionally thick and impact-resistant. Their robust build ensures long-lasting durability and provides excellent protection against collisions, keeping your watercraft safe.. Easy Installation Designed for hassle-free installation, dock bumpers dock edge can be installed horizontally on a dock using screws.Alternatively,jet ski bumpers for docking allow you to easily attach ropes through the holes of the jet ski fenders for hanging, offering versatile mounting options. Wide Compatibility Suitable for a variety of settings, these upgraded PWC boat bumpers are compatible with various types of motorboats and small boats up to 25 feet in size. For optimal protection, it is recommended to use two bumpers for jet skis or one bumper for every 10 feet of boat length..

What You Get our boat fender set includes 2 pack white oval marine grade boat bumpers that inflates to protect your boat, ensuring you have the essential protection ready for small boats, pontoons, and boats whenever you hit the water. Size Information these boat fenders measure 15.75 x 4.33 inches 40 x 11 cm with a 0.91 inch 23 mm hole diameter and a buoyant 1.18 gallon 4.5 L volume and weighing approximately 17.637 ounce 500 g each This specific sizing ensures effective impact absorption without being overly bulky. Quality Materials our boat fenders for docking crafted from grade polymer boast to prevent air leakage and withstand strong impacts The boat buoy bumpers also resist uv light and minimize the risk of cracking or aging, even after prolonged exposure. Versatile Protection safeguard your boat with our boat fenders, designed to protect various types of boats from collisions and abrasions during docking and pontoon mooring The integrated double-molded hang eyes are reinforced for exceptional strength, providing secure attachment points that won't pull out under stress. Wide Application the boat bumpers fenders suitable for boats with lengths to 10 ft Frequently applied in pontoons, fishing boat, sport boats, day cruisers, sailboats, jet skis, and boats.

Perfect Protection for Boat Our Boat Fender certainly execute an outstanding job at safeguarding your boat during waves and features great buffer effect, protecting boats from damage caused by heavy collision between hard surfaces, especially when the boat speeds into the shore or even when two boats collide accidentally. And It could also be an good choice as an anchor buoy.. Marine-Grade Material Practical Design Our Boat Bumpers are made of marine-grade PVC, features shock resistance, anti-corrosion and UV resistance Seamless one-piece construction prevents from splitting up and features a high performance of compression resistance with ribbed on all sides increase friction and resist abrasion, making it strong enough to withstand external force extrusion.. Reinforced Twin Eyelets Design Designed with reinforced molded eyelets on both ends, and the eyelets are reinforced to prevent breaking in daily use. You can hang the boat fenders vertically or horizontally with the two eyelets according to your needs, easy to install disassemble and help the boat fenders for docking attach to boat more firmly.. Equipped with Fender Lines Pump Comes with 4 Pack Boat Fenders 4.5'' x16'', 4 Fender Lines 6.5ft in length, 4 inflating needles and 1 hand pump Our boating accessories offer superior quality and reliability while on the water.. Wide Application Recommended for boats between 15ft and 20ft. This boat bumpers fenders are ideal for dock, yacht, sailboat, row boat, ski boat, canoe, pontoon, etc..

Convenient Packing Contents our package comes inclusive of 4 inflatable dock bumpers along with a set of an inflatable kit, enough space can be provided between your boat and other objects to prevent your boat from colliding with other boats, docks or other objects in the water. Material with Enhanced Durability boat buoys bumpers are composed of PVC, weighting up to about 800 grams, enhancing both durability and longevity This robust construct ensures the bumper can withstand frequent usage and harsh marine conditions. Large Size for Protection with a considerable diameter of about 24 inches 60 cm, dock bumpers marine offer ample space between your boat and other objects, thus effectively safeguarding your boat against scratches or other forms of physical impact. Easy Storage and Portability the inflatable design of black boat bumpers ensure easy storage and portability When not in use, you could deflate them with ease for compact storage, saving space on your boat They are also lightweight, thereby making them portable and easy to handle, suitable for travel. Widely Applicable pontoon bumpers for docking are not only restricted to boats They boast a wide range of applications You can use them for yachts, sailboats, rowboats, and much more, making them a good addition to your boat accessories.

Recommended boat size - 60 to 70 Feet. Made in the USA for heavy duty marine applications. Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles. Tri-valve for easy inflation with football needle or compressor. Constructed from flexible and resilient marine grade vinyl. Tuff End fenders feature a seamless one piece construction, the strongest in the industry.

Strong Resistance to CompressionThis marine fender features a high performance of compression resistance. It is able to withstand much compression without breaking. Also, with ribbed on all sides increase friction and resist abrasion, making it strong enough to withstand external force extrusion.. Reinforced Eyelets on Both Ends There are two eyelets on both ends of each fender in order to help the fender attach to your boat more firmly. The eyelets are reinforced to prevent breaking in daily use. Moreover, you can hang the boat fenders vertically or horizontally with the two eyelets according to your needs.. Buffer Protection for Boat This boat fender features great buffer effect, protecting boats and docks from damage caused by heavy collision between hard surfaces, especially when the boat speeds into the shore or even when two boats collide accidentally. This tool is of much practicality for ship owners.. High Quality Material for Durability Crafted of marine-grade PVC material which enjoys distinct advantages of abrasion and UV resistance, this boat fender could weather regular use for years to come. PVC material not only adds solidity and durability, but also makes this boat fender highly glossy.. Equipped with Fender Lines Inflator For make convenience for you, this 4 pack boat fenders come with four strong fender lines which are helpful and long enough to connect fenders with boat. Meanwhile, equipped with inflation pump and needle, it can be inflated or deflated to a desired pressure at your convenience..

MAX PROTECTION - An innovative hanging system enables easy positioning on a boat or dock offering protection both above and below the rub rail, unlike traditional fenders. Patents pending. HUGS CONTOURS - With a hanging point that's lower than traditional fenders, SENTRY hangs at an angle that aligns with the contour of your boat's hull. This keeps SENTRY from getting caught on top of the dock and adds to the beautiful aesthetic of your boat.. INNOVATIVE MATERIAL - Molded in a cross-linked closed-cell foam that is extremely durable. This patented material doesn't absorb water and resists fading from the sun's harmful UV rays. It also doesn't contain nasty chemicals, like vinyl chloride, so it's more environmentally friendly than traditional fenders.. NO KNOTS - No ropes, no hassle. An integrated strap easily attaches to boat cleats and docks for super-fast installation.. TIDY UP - Out of the box SENTRY comes with an extra-long strap. This makes it easy to loop over higher attachment locations like towers and grab rails. If your cleats are in a great spot for hanging SENTRY, you can trim the strap to keep things tidy..

PREMIUM PONTOON PROTECTION Designed specifically for pontoon boats, these pontoon boat fenders bumpers provide full side coverage to help prevent scratches, dents, and dock damage when tying up at marinas, docks, or alongside other boats. SECURE NO ROLL DESIGN The MAVEN lip keeps these boat fenders for docking perfectly positioned along the pontoon, preventing rolling or shifting so your boat stays protected exactly where impact protection is needed most. FAST DOCKSIDE SETUP Built with an integrated DRYLINE strap, these boat bumpers for docking install quickly without complex knots. Simply attach and adjust for reliable protection during docking, rafting, or tying up at the marina. MARINE GRADE CLOSED CELL FOAM Crafted from patented non marking closed cell foam, these boat dock bumpers resist UV exposure, water absorption, and long term wear while protecting your pontoons finish. TAILORED FOR PONTOON BOATS Unlike generic boat fenders, MAVEN pontoon fenders are shaped to match pontoon rails and decks, providing a cleaner fit, better coverage, and a refined premium look for modern pontoon boats.

MAXIMUM DOCKSIDE PROTECTION Designed for serious docking protection, the TITAN delivers oversized impact absorption. These boat fenders bumpers shield hulls from dock contact, helping prevent costly scratches and dents when boats tie up. FULL LENGTH DOCK COVERAGE Available in multiple sizes, TITAN acts as a continuous dock fender barrier along the dock edge. Ideal for marinas, lake houses, and private docks needing dependable dock bumpers for boats. FLEXIBLE INSTALLATION SYSTEM Reinforced mounting loops spaced every 24 inches allow easy adjustment across different dock styles. Secure your boat dock fenders using included nylon straps or hang with D rings along seawalls or flat dock edges. HEAVY DUTY MARINE CONSTRUCTION Made from thick commercial grade vinyl, this large boat fender absorbs repeated impacts from waves, wind, and docking movement while maintaining a clean premium appearance season after season. INFLATE FAST STORE EASY The premium one way valve enables quick inflation while preventing air leaks. When the season ends, deflate your boat bumpers for docking and store compactly until next boating season.

A Bundle of Convenience with the packaging including 4 boat bumpers for docking and 4 fender lines, your boat safety is ensured right from the start, saving you time and providing you with the convenience you need to focus more on your boating adventure. Just Right for Your Boat the designed size of the boat fender 22.4 x 6.9 x 2.5 inches and the fender line 5ft x 0.4 inch are ideal for most boat, providing the protection it needs against undesirable collision Our boat fenders for docking are designed in two parts, one large and one small, allowing for flexibility and seamlessly fitting the different contours of your boat, and preventing scratches when docked. Sturdy and Robust mainly crafted from sturdy PVC material, expect nothing but high performance reliability from these boat dock bumpers Their rock solid, thick construction with a certain degree of elasticity ensures that they stay sturdy to constant dock contact, providing long term service They are designed to act as cushions, protecting your boat when the waves get rough, preventing damage from massive collisions between hard surfaces. Flat yet Flexible despite the flat style of the boat hull protector, it remains highly flexible, resiliently adapting to the contours of your boat This flexibility, coupled with its obstruction to constant dock contact, assures you that your boat's hull will keep away from damaging scrapes and scratches. Effortless to Use the functional design of these black boat bumpers allows you to easily attach the included ropes through the holes of the fenders This quick and hassle less installation makes sure that you spend less time setting up and more time cruising on the water.

Strong Resistance to CompressionThis marine fender features a high performance of compression resistance. It is able to withstand much compression without breaking. Also, with ribbed on all sides increase friction and resist abrasion, making it strong enough to withstand external force extrusion.. Reinforced Eyelets on Both Ends There are two eyelets on both ends of each fender in order to help the fender attach to your boat more firmly. The eyelets are reinforced to prevent breaking in daily use. Moreover, you can hang the boat fenders vertically or horizontally with the two eyelets according to your needs.. Buffer Protection for Boat This boat fender features great buffer effect, protecting boats and docks from damage caused by heavy collision between hard surfaces, especially when the boat speeds into the shore or even when two boats collide accidentally. This tool is of much practicality for ship owners.. High Quality Material for Durability Crafted of marine-grade PVC material which enjoys distinct advantages of abrasion and UV resistance, this boat fender could weather regular use for years to come. PVC material not only adds solidity and durability, but also makes this boat fender highly glossy.. Equipped with Fender Lines Inflator For make convenience for you, this 4 pack boat fenders come with four strong fender lines which are helpful and long enough to connect fenders with boat. Meanwhile, equipped with inflation pump and needle, it can be inflated or deflated to a desired pressure at your convenience..

Complete 6-Pack Set with All AccessoriesIncludes 6 boat fenders 4.5 x 16 inches each, 6 fender lines 4.92 ft, 1 hand pump, and 6 inflation needles. Everything you need to protect your vesselno additional purchases required. Great value for new boat owners or replacing worn bumpers. Marine-Grade PVC for Durability our shipping fenders made of high-quality PVC with anti-collision, anti-corrosion, and UV-resistant properties Built to withstand harsh saltwater environments, sun exposure, and repeated impacts without cracking or fading. Reinforced Double Eyelets for Versatile Mounting Both ends feature reinforced eyelets that resist tearing under pressure Hang vertically for side-to-side protection or horizontally for longer coverageadapts to different boat hull shapes and docking conditions. Ribbed Surface Seamless Structuremarine fenders ideal for Ski Boats, Fishing Boats, Pontoons, Yachts, Sailboats, and Canoes Perfect for Docks, Marinas, and Mooring Tip inflate to firm but slightly compressible pressureavoid over-inflation for optimal cushioning. Wide Compatibility for Recreational BoatsIdeal for ski boats, fishing boats, pontoons, yachts, sailboats, and canoes. Perfect for docks, marinas, and mooring. Tip Inflate to firm but slightly compressible pressureavoid over-inflation for optimal cushioning.

The package contains 4x 6.5 inch boat bumpers for docking, 4x the same color boat fender ropes, 1x air pump and needle, 1x storage bag.. Well protection- Keeps your boat from getting scratched and damaged when tied up at the dock and around other boats. Reinforced molded eyelets support the boat bumpers fenders to hang vertically or horizontally, strong enough to withstands everyday usage but feel soft to show no signs of wear.. Easily inflated- If you tired of boat bumpers marine that get flat or deflate, you'll be glad to find these have valves for inflation. You can be in charge of the pressure you desire, very handy to use and take only 50 seconds to inflate.. Rule of size and quantity- A boat fenders inflatable should have 1 inch of diameter for every 4 to 5 foot of boat length. If you are going to be docking in harsh conditions such as an open lake prone to high winds, larger boat fenders is more recommended. Place one docking fender at every 10 foot of waterline, with a minimum of 3 fenders along one side.. Easily storage- You can optionally deflate or inflate to storage all of parts in the bag, fit perfectly under seats or inside storage compartments..

PREMIUM PROTECTION - Crafted from robust EVA foam, our Boat Fenders offer complete cushioning, effectively absorbing and dispersing collision forces They excel in UV and seawater resistance, ensuring superior protection The addition of durable polyester straps facilitates easy and secure fastening to the dock or deck These reliable defenses provide boat owners with peace of mind. SIMPLE INSTALLATION - Utilizing locks, the strap easily attaches to the boat dock or deck Designed with a modular structure, the installation and removal processes are convenient Boat owners can effortlessly adjust it as needed using cables and locking structures. BOAT FENDER SIZE - The VIVOHOME Boat Fender measures 16.3 x 7.5 inches, catering to a diverse range of boat sizes Generally, boats under 10 feet typically require 2 fenders, while those between 10 to 20 feet typically need 3 fenders Following this analogy, it is recommended to add one extra fender for every 10 feet increase in boat length to ensure complete protection. VISUAL APPEAL - Beyond providing protection, our Boat Fenders elevate the aesthetic of your watercraft Offered in black, gray, and blue, these fenders not only ensure functionality but also enhance the visual appeal of your boat, marrying style with practicality. VERSATILE USE - The innovative design seamlessly caters to a variety of boat sizes and styles, including yachts, sailing dinghies, bass boats, pontoon boats, bridge slide boats, ski boats, and fishing boats Beyond delivering top-notch protection, these fenders also elevate the overall aesthetic of your boat, combining functionality with style.

Ultimate Corner Protection Dockmate Corner Bumper Fender combines inflatable fender and permanent dock bumper for maximum safeguarding.. Durable Marine-Grade Vinyl Crafted from rotomolded UV-resistant vinyl with sturdy ribs, ensuring long-lasting protection against impacts.. Hassle-Free Installation Permanently mount the fender with included stainless steel hardware, providing convenience and security.. Reliable Longevity Crafted with robust rotomolded UV-resistant marine-grade vinyl and sturdy ribs, ensuring extended protection against impacts.. Ideal Dimensions Sized at 8 dia. x 16H, this protective fender is designed to offer comprehensive coverage for your boat's corners..

END-TO-END LINE PASSAGE Hang this Big B boat fender effortlessly either horizontally or vertically using its end-to-end line passage feature. It is compatible with 58 ropes, ensuring versatile and secure placement. RIBBED TECHNOLOGY Experience enhanced stability and minimized roll with the innovative ribbed technology of the Big B fender, providing optimal protection even in choppy waters. TAILORED PROTECTION Specifically designed for boats ranging from 25' to 35' in length, this Big B boat fender offers tailored protection, ensuring your vessel remains safeguarded during every excursion. PATENTED TRUE COLOR Enjoy vibrant, long-lasting color with the patented True Color technology of Big B boat fenders, adding a touch of sophistication while retaining visual appeal over time. RUGGED MARINE-GRADE VINYL Constructed from tough marine-grade vinyl, the Big B boat fender withstands harsh marine elements, providing reliable protection trip after trip.

Easy installation Mounting hardware not included straightforward setup with typical screw placement.. Professional-grade Ideal for dock builders, marinas, and those seeking heavy-duty profiles and dock protection.. Premium materials Crafted from high-quality, marine-grade resins for lasting durability.. Convenient length Comes in a 20-foot roll, offering ample coverage for various dock sizes.. Notice This product is packaged in rolled up, 20ft sections. You will need to let the roll warm up before unwinding and installing. We recommend leaving it out in the sun, or using a heat gun on low to let the plastic expand and return to it's original flat shape..

EXTRA PROTECTION. These rubber bumper strips increase protection on your delivery van, work truck and a variety of commercial vehicles, as well as trailers. TOUGH RUBBER. The rear bumper protector rubber is a tough black rubber to withstand bumps and abrasions from a loading dock, guard rail or pylon. VERSATILE. These rubber bumper guards are great for protecting the rear bumper, front bumper, rear step and sides. UNIVERSAL FIT. These rubber bumper protectors are 2-18 inches x 1-78 inches x 20 inches and can be mounted anywhere needed. HARDWARE NOT INCLUDED. The three holes in each bumper come ready to accept 14-inch hardware included. Drilling may be needed on the mounting surface.

MAXIMUM DOCKSIDE PROTECTION Designed as premium boat fenders, this innovative hanging system positions protection both above and below the rub rail, helping shield your hull from dock impact and scratches during docking. HULL-HUGGING CONTOUR FIT Unlike traditional round fenders, the angled design works like a flat boat fender, aligning naturally with your boats shape to reduce slipping and improve coverage along the hull. ADVANCED CLOSED-CELL FOAM MATERIAL Built with high-performance molded foam used in marine bumpers for boats, offering exceptional durability, UV resistance, and water-repellent protection that wont fade or absorb moisture. FAST INSTALLATION NO KNOTS REQUIRED The integrated strap system creates convenient boat docking accessories that attach quickly to cleats or rails, eliminating complicated ropes and making setup effortless. VERSATILE MARINA DOCK USE Ideal as dock fenders or protective boat docking bumpers, these fenders help safeguard your boat during mooring, rafting, or storage at marinas and lakeside docks.

Fit type Universal Fit.

DURABLE CONSTRUCTION Molded from a lightweight, polymeric material that is flexible and non-marring that resists UV damage, chalking, splitting, and crushing. OPTIMAL PROTECTION Oval shape with ribbed design minimizes rolling, reducing swing and wear on hull sides. HEAVY-DUTY EYE ENDS Reinforced thick-wall eyelets accommodate lines up to inch thick for secure mooring. SEAMLESS DESIGN Guaranteed against splitting or bursting for the life of the fender, ensuring long-term reliability. GENEROUS SIZE AND VISIBILITY Measures 8 inches in diameter and 28 inches in length, with a bright white color for high visibility on the water.

ATTWOOD 9354BD1, ATT9354BD1.

Recommended Boat Size 20'-25'. Specs Diameter 6.5 in, Length 22.0 in, Volume 2.2 gal, Eye Diameter 0.8 in. Strong single piece construction. One piece construction. Even wall thickness for maximum strength and durability. Molded-in ribs for strength and abrasion resistance. Polyform's unique vinyl valve system for sizes G3, G4, G5 and G6. Designed for use by trailered boats and in permanent protected moorings. Made in the USA.

High-Visibility 3 Sizes Available bright, contrasting colorways to easily judge docking distance. The 6ft and 10ft lengths provide expanded shield protection for diverse boat hulls. Marine Hull Guard Protection Engineered with heavy-duty PVC to absorb high-impact shocks. Protects your boat gel coat from rough docks, waves, and obstacles during mooring. Effortless Secure Tie-Up Features dual reinforced D-rings on each side paired with two included durable mooring ropes. Allows for quick, reliable horizontal or vertical hanging to match any dock height. Complete Docking Accessory Kit Every package includes an inflatable boat bumper, two durable mooring ropes, a specialized repair kit, and a zippered storage bag for clean, compact stowing. Quick Inflation Compact Storage Easily inflates for instant deployment and deflates into the included travel bag. Fits inside boat cabinets, under seats, or in small compartments when not in use.

SUPER DURABLE - Features double-reinforced seams and 1280D nylon construction - the same material used in the most demanding naval applications.. ULTIMATE TIE-UP FENDER - With two heavy-duty D-rings at each end, hooking up with your friends just got a whole lot easier.. RAPID DEPLOYMENT - TITAN easily inflates with a standard 12-volt towable tube pump for short-term use during side-by-side tie-ups between boats up to 27 with compatible hull shapes.. STOWS SMALL - TITAN easily stows in most boat lockers with the included mesh storage bag to help transport the fender when its not in use.. DIMENSIONS - 10' long x 18 wide.

TWO PACK BUMPER PUMP SET Our 2 pk of marine grade boat bumpers comes with 2 separate inflatable black bumpers that measure 23 long and 6.5 wide. 18 of the actual boat fender that inflates to protect your boat. Set includes manual pump needles. STRONG REINFORCED DEEP SET EYELETS Each end offers a reinforced molded eyelet that measure 34 wide in the narrowest part expanding out on the boat dock bumpers to 78 wide. Your fender lines will not rip through these heavy duty tie eyelets.. PROTECTIVE RIGGED RIBBED DESIGN Our reinforced ribbed design on the rubber bumper buoy allows for minimal contact while providing air between the ridges. This prevents roll and reduces scuff marks and dings when using the dock bumpers for docking.. INFLATABLE PUMP STORES ON BOAT Our pair of boat bumpers for docking come with a pump 2 pump needle valve tips to inflate your boat fenders for docking and keep it stored on board. Our boat bouys accessories offer superior quality and reliability.. WHY BETTER BOAT We are a family owned American business committed to making premium products for interior exterior boat accessories marine grade, RV care, pontoon boat cleaning supplies. We stand behind your satisfaction..

Package Content- The package contains 2x PWC fenders for Jet ski, Yamaha, Waverunner, Kawasaki, 2x 18.5 inch elastic cords.. Useful Elastic cords- Throw the other ropes, replace them with the attached elastic cords to keep PWC bumper fenders in place. Easy to use and adjust, 18.5 inch length is suitable for all kinds of PWC.. Easily storage- Instead of the smaller PWC bumper pad, Affordura update to the larger size 14x6x3.2 inch. Thick enough to protect the sides of the boat while docked even in rough waters, small enough that they stow easily under the front of ski hatch when not in use.. Quickly install- Install in seconds, just on and off. The hook on the back of PWC fender guards grabs the rail of the ski and you can pull it nice and tight so it doesnt move, made of heavy duty plastic rather than rubber coated metal to minimize scratching on the jet ski.. Well protection- Save the PWC from scratches and prevents it from bumping directly into the dock side. Fold design allows PWC bumper guards to sit on the rail of the PWC so that it can protect both the upper and lower side..

Molded from soft, lightweight material thats easy on your boat. Very tough resistant to chalking, splitting, deflating, or crushing. Highly resistant to UV and fading. Easy installation with 3 516 inch holes. Made in the U.S.A and Guaranteed for life.

HEAVY-DUTY MARINE-GRADE MATERIAL Our boat fenders are constructed with double-reinforced seams and 1280D marine-grade PVC, ensuring exceptional durability and resistance to abrasion and tears. Each fender is thermally sealed and welded inside and out, providing superior protection for your valuable pontoon boats, yachts, and sailboats. This material is designed to withstand exposure to oil, gasoline, and sunlight, enhancing the fender elasticity and resistance to wear and corrosion. CONVENIENT AND VERSATILE USE These inflatable boat fenders are designed for easy use and versatility. They can be inflated with any standard hand or electric pump not included, including those used for paddle boards. Featuring 2 D-rings for secure attachment, these fenders are perfect for docking and mooring, and they simplify connecting with other vessels. When not in use, they deflate and fold for compact storage, making them ideal for large and extra-large boat fenders. COMPLETE SET FOR YOUR NEEDS Our boat fenders come in a complete set, sized at 10ft High x 18inches Diameter. The set includes two nylon dock lines, a repair kit, and a storage bag. This comprehensive package ensures you have everything you need for a seamless docking experience, making it perfect for boat fenders for docking and boat bumpers for docking. ENHANCED SAFETY AND PROTECTION Our inflatable fenders provide excellent protection in stormy weather, reducing the impact of collisions with docks or other boats. These heavy-duty, durable fenders are built to last, offering peace of mind during your boating adventures. They are ideal for inflatable boat fenders, deep horizontal laminated dock bumpers, and rectangular inflatable boat bumpers.. EXCELLENT CUSTOMER SERVICE Customer satisfaction is our top priority. If you need assistance, please follow these steps Go to Your Orders, find your order in the list, select Problem with order, choose your topic from the list displayed, and then select ''Contact seller''. We're devoted to delivering solutions that meet your needs and offering expert assistance to enhance your experience.

Innovative Patented Product The AWEMUFA Boat fender boasts a sleek, streamlined exterior design inspired by fashionable sports cars. These boat dock bumpers are made from sturdy and environmental EVA material, providing excellent impact resistance and ensuring safety and reliability during docking. Easy installation Unlike traditional inflatable boat fenders that require knots, AWEMUFA Boat Fender innovative design makes it easy to install without knots, and the wedge-shaped design prevents bouncing during use, ensuring the fender stays in place. Integrated locking system Our extra-long straps are not only easy to use but also have an integrated automatic locking system that securely fastens the fender to the dock or deck without the need for complicated knots. Suitable size The AWEMUFA boat fenders measured as 17.12 inches 8.27 inches. To get the best protection, we recommend adding a fender for every 10 feet of boat length. For boats under 30 feet, at least three fenders are needed. AWEMUFA boat bumper is suitable for various types of boats, such as yachts, sailing dinghies, bass boats, pontoon boats, bridge slide boats, ski boats, and fishing boats. We recommend choosing the number of fenders based on the boat size to provide better protection. After-sales service AWEMUFA's excellent and innovative quality continuously drives our development, and our perfect service guarantees customer satisfaction. We promise to provide excellent service for every buyer. If you need assistance, please follow these steps Go to Your Orders, find your order in the list, select Problem with order, choose your topic from the list displayed, and then select Contact seller.

INNOVATIVE PATENTED PRODUCT The AWEMUFA Boat fender boasts a sleek, streamlined exterior design inspired by fashionable sports cars. These boat dock bumpers are made from sturdy and environmental EVA material, providing excellent impact resistance and ensuring safety and reliability during docking. EXTRA LARGE ROBUST Our boat fenders, crafted from high-quality EVA material, offer durability and stability. These boat bumpers for docking absorb impact forces, protecting your vessel from collisions. The oversized design provides extended coverage, preventing accidental impacts at docks or piers. Ideal for professional marine use and recreational boating, these large boat bumpers ensure safety and practicality. SUITABLE SIZE FOR ALL BOATS Measuring 28 inches 8 inches 6.7 inches, our extra-large boat fenders provide comprehensive protection. We recommend one fender for every 10 feet of boat length, with at least three fenders needed for boats under 30 feet. These boat bumpers are suitable for various types of boats, including yachts, sailing dinghies, bass boats, pontoon boats, ski boats, and fishing boats. EASY INSTALLATION Our boat fenders are designed for ease of installation. No knots required the innovative design makes setup a breeze. The wedge-shaped design prevents bouncing during use, ensuring the fender stays securely in place. INTEGRATED LOCKING SYSTEM Our extra-long straps on these boat fenders feature an integrated automatic locking system, simplifying the docking process. They securely fasten the boat bumpers to the dock or deck, eliminating the need for complicated knots and ensuring your vessel is protected during mooring.

TWO-PACK WITH PUMP AND LINES Includes 2 inflatable UV-resistant PVC fenders measuring 23 x 6.5 18 of inflating protection, an inflation pump, 2 needle valve tips, and two 6 ft pre-whipped lines ready to rig from day one.. REINFORCED TAPERED EYELETS Molded eyelets at each end taper from 34 at the narrowest point to 78 at the base locking the line in under load rather than letting it pull through. Built to hold when wind or current pushes the boat hard against the dock.. RIBBED DESIGN PROTECTS BOAT FINISH Raised ridges reduce contact area and create air gaps between fender and hull minimizing friction and preventing scuffs and dings on the gel coat. The ribbed profile also stops the fender from rolling out of position.. COMPACT PUMP STORES ON BOARD The included hand pump inflates each fender quickly and fits in a gear bag or bow locker between uses. Air valve is self-sealing no cap required. Two spare needle tips included in case one is misplaced mid-season.. SIZE GUIDE 6.5 fenders are rated for boats in the 2026 ft range. Wide-beam pontoons over 26 ft generally need 8 fenders. Two cover standard docking add a third for overnight or high-traffic slips. Better Boat family owned, Miami Beach, Florida..

6X4 INCH CLOSED CELL FOAM THAT HOLDS ITS SHAPE High density closed cell foam won't compress, flatten, or absorb water under repeated impact maintaining a full 4 inch protective depth whether docked daily or seasonally on fresh or saltwater.. MARINE GRADE VINYL BUILT FOR SUN AND SALTWATER Thick tri-laminate UV-resistant vinyl with polyester backing and double thermal-bonded seams won't fade, peel, or crack in sun or salt. Corrosion-resistant grommets at every mount point prevent rust.. STAINLESS STEEL SCREWS INCLUDED, INSTALLS IN MINUTES Mounts horizontally along dock edges or vertically on pilings and posts no separate hardware purchase needed. Angled ends allow interior wrapping inside a slip for full-perimeter protection.. 36, 48, AND 59 INCH PLUS A CORNER PIECE 2-YEAR WARRANTY Select the length for any dock section. Corner piece wraps 90-degree turns and slip entries. All pads are 6 inches wide by 4 inches deep. Backed by a 2-year manufacturer warranty.. ALSO AVAILABLE IN 48, 59 INCH AND CORNER The 48 inch covers more edge per section. The 59 provides the longest run. Corner piece wraps 90-degree turns. Better Boat is a family owned American company in Miami Beach, Florida..

THICK TOUGH PROTECTION Keep your boat or PWC looking like new with our boat dock bumper guards. Our dock pole bumpers or horizontal protectors are constructed from heavy duty, high density, closed cell foam that won't deflate or collapse over time.. MARINE RESISTANT Designed to withstand the elements, our deck or piling bumpers for boat dock protection are covered in thick tri laminate UV resistant vinyl and polyester. The seams are double thermal bonded with corrosion resistant grommets.. EASY INSTALLATION Our interior or vertical dock bumper edge pads come with stainless steel screws to easily mount them in various different configurations including edges or post. Ends are angled in to allow interior wrapping in a slip.. 2 YEAR REPLACEMENT WARRANTY We are so confident in our boat dock accessories and these boat dock bumpers marine solution, that we will replace them within 2 years from manufacturers defects. Available in 24,36 and 59 inch bars and a corner piece.. WHY BETTER BOAT We are a family owned American business committed to making premium quality boat and RV accessories, care and cleaning supplies. We stand behind your satisfaction and our products including our Dock Fenders and Dock Bumpers..

Add Protection Both Boat and Dock Install the inflatable dock bumper fender on the side of the dock to protect the dock from being hit by boats and protect the boat from damage caused by contact with docks.. Durable Reliable Dock Bumper Fender Constructed from marine grade rotomolded vinyl with sturdy ribs, featuring soft, tough, UV-resistant, impact-resistant and anti-tear to ensuring long-lasting protection for the boat and dock. The included mounting hardware are made of 304 stainless steel for rust-proof and long-lasting.. Hassle-Free Mounting Dock bumper fender comes with 304 stainless screws and washers. Provide the convenience of permanently mounting dock bumpers and secure attachment to your dock. No need to adjust fenders each time when docking.. Special Design Sturdy ribs of the dock fender bumper is durable enough to against impact. The round shape helps guide the boat down into the slip and reduce the rubbing.. Dock Bumper Fender Sizes The size of the dock fenders is 15.2 x 6 x 4 that fit various docking spaces. The mounting hole is at 6 from the top..

Sturdy Design Ehaho boat fenders feature a stylish X-shaped design with a sturdy multi-grid support structure on the back. This structure evenly distributes force to absorb and dissipate impact, providing reliable protection against scratches and damage during docking. The four-hole and double-handle design allows for both vertical and horizontal hanging, ensuring easy installation on boats or docks. Material Reliable Protection Made from premium EVA material, no need to inflate. Resistant to UV rays and seawater corrosion, they provide long-lasting durability and stability, effectively absorbing and dissipating impact forces. Compared to PVC, they are more hard-wearing, sustainable, and better for preserving the marine ecosystem. Easy to Use Featuring an integrated locking rope, installation and removal are quick and simple, with no need for complicated knotting. The reinforced extra-long nylon rope is easily adjustable to different heights, adapting to various docking environments. Size Guide Ehaho extended-length boat fender, measuring 17.2 L x 8.1 W x 4.5H, making it ideal for boats ranging from 15 to 25 feet. For optimal protection, we recommend using one fender for every 10 feet of boat length. For boats under 30 feet, deploy at least three fenders to ensure full coverage and safety. Wide Range of Applications These boat fenders are ideal for a wide variety of watercraft, including bass boats, pontoon boats, bowriders, deck boats, ski boats, jon boats, small fishing boats, and yachts. Designed to protect your boat's gunwale and hull, they provide reliable cushioning during docking. Whether in calm waters or more challenging conditions, these fenders keep your boat safe from impacts, ensuring long-term protection in all environments..

UPGRADED AND INNOVATIVE The Ehaho pwc fender boasts a sleek, streamlined exterior design inspired by fashionable modern watercraft. These pwc bumpers are made from sturdy and environmental material, providing excellent targeted impact protection and ensuring safety and reliability during docking or tying up alongside other watercraft. RUGGED GRADE FOAM DEFENSE Unlike hard plastic versions, these won't dig into your skin or scrape you up if there's sand on them. Built from premium non marking closed cell EVA foam, these pwc dock bumpers absorb impact while resisting UV exposure and water damage, which can keep your PWCs finish clean and protected and neatly for convenient onboard storage. WIDER IMPACT SURFACE AND CUSTOM COLOR MATCH Our PWC fenders provide a broader impact zone than traditional designs for superior dock and hull protection. Available in multiple color options to perfectly match your watercraft, combining enhanced safety with a seamless, personalized look. EASY INSTALLATION Unlike traditional pwc fenders that require knots, Ehaho pwc fender bumpers innovative design makes it easy to install without knots. These jet ski bumpers for docking stay firmly in place to protect against dock impact, scratches, and contact with nearby boats at marinas, sandbars, and crowded docks. PERFECT FOR MOST PWC Ehaho pwc fenders are suitable for various types of pwcs, which are compatible with Sea-Doo, WaveRunner, Jet Ski, these are perfect for a Personal Water Craft PWC or in our case, a small 11-foot shallow skiff. The fit is excellent and surprisingly universal.

Upgraded Design 22.594.5 enlarged boat fenders for docking provide wider coverage protection, fit 1525 ft boats. Extended straps and secure locks ensure easy, stable installation that won't fall off during cruising or docking.. High Impact Resistance Made of marinegrade EVA for excellent shock absorption and durability. High density and resilience resist compression or deformation, delivering reliable protection for frequent docking and rough conditions.. Durable Stable Premium EVA resists saltwater and UV rays without cracking or hardening, ideal for long-term outdoor and marine use. Non-slip textured surface prevents shifting, scuffs, and scratches to protect your boat's finish.. Easy Setup Maintenance One-piece design, ready to use out of the boxno inflation, no leaks, no knots, no air checks. The dock bumper's built-in handles and adjustable locks let you quickly position and secure it on docks or decks.. Universal Compatibility Feelnais 2-pack boat docking bumpers fit pontoons, Jet Skis, fishing boats, sailing dinghies, Jon boats, bass boats, and small-to-medium vessels. Feel free to contact us with any questions..

This heavy-duty commercial grade dock bumper is great for commercial marinas and personal docks. Cover is crafted from high-quality UV and tear resistant vinyl and polyester tri-laminate and filled with high-density closed-cell foam. Corrosion-proof stainless steel grommets are spaced along the full length of each bumper for secure mounting to the docks edge. Dock bumper provides optimal protection from anything that could scratch, dent, or nick your boat. Great for mounting to docks, posts and boats, this padded bumper measures 60 x 8 x 6-inches.

Premium Dock Corner Protector Corner dock bumper fender combines inflatable fender and permanent dock bumper for ultimate dock corner protection. Install the dock bumper on the corner of the dock to protect both dock and boat from damage caused by collisions.. Reliable Marine-Grade Corner Dock Bumper Constructed from marine-grade rotomolded vinyl with sturdy ribs, featuring soft, tough, UV-resistant, impact-resistant and anti-tear to ensuring long-lasting protection against impacts. The included mounting hardware are made of 304 stainless steel for rust-proof and long-lasting.. Hassle-Free Mounting Corner Dock bumper comes with 304 stainless steel screws and washers. Provide the convenience and security of permanently mounting marine corner dock fender bumper. No need to adjust fenders each time when docking.. Special Design Sturdy ribs of the marine corner dock bumper fender is durable enough to against impact. The round shape helps guide the boat down into the slip and reduce the rubbing.. Boat Dock Bumpers Sizes The size of the dock corner fenders is 15 x 6 x 4.5 and aim to provide complete coverage for dock corner..

Ultimate Protection for Low Freeboard Boat The freeboard fenders features a unique curvature that holds the fenders in place and will not roll around like traditional bumpers, protecting boat's sides, rub rail and gunwale, a great solution to boat sliding under the dock and getting damaged by the underside of the dock. Durable Low Freeboard Fenders Crafted from marine grade vinyl, the boat fenders are designed to withstand UV rays, seawater corrosion and long lasting protction The soft material helps absorb the impact with a boat hull and dock. Boat Fender Size The boat fenders measured as 5 x 16, fit for boats that sit lower in the water, suitable for a variety of watercraft including bass boats, ski boats, bay boats and more low free board boat We recommend choosing the number of fenders based on the boat size to provide better protection. Superior Construction The flat fenders made of high quality material, built in a molded needle-nose inflation valve for easy inflation and deflation, an eyehole at the bent end. Easy Installation It is easily tied a to boat cleat, or tied it to a dock cleat The bass boat fenders can be tied over the cleat to against high dock.

More Protection, Stability, and DurabilityUpgraded adjustable modular and ergonomic design make our boat fenders, and bumpers different. Meanwhile, we added reinforced nylon cords with a fixed buckle as an extra measure of fixed protection to deal with a variety of harsh use environments, especially in stormy weather.. DIY Boat FendersUpgraded adjustable modular fenders, attach up to 4 marine bumpers with the included rope, you can additionally purchase longer nylon ropes and customize the number of dock bumpers according to the size of your boat or dock. At the same time, we provide 2 blocks and 3 blocks options for you.. Broad CompatibilityBoat bumpers have wide applications for bass boats, Jon boats, pontoon boats, ski boats, fishing boats, or docks. We recommend placing 1 fender every 10 feet to better protect your boat, choose the right number of fenders according to the size of your boat.. Easy to Installation Extra-Long RopesInstallation in seconds simply by opening and closing the quick-release lock. Extra-long ropes can be looped around higher connection positions, and easily attach the impact boat fenders to dock pilings and boat splints, protecting your boat from getting scratched and damaged.. Sturdy Why Choose UsMade of extremely long-lasting EVA material that will not fade or degrade after prolonged exposure to the sun. At KEMIMOTO, we fully stand behind our boat fenders..

Quality Made with Heart -OBAKL boat fenders made of premium PVC, seamless one-piece forming, effectively prevent from breaking. These fenders are designed to withstand harsh marine environments and provide long-lasting protection for your vessel. And every product will be professionally examined before it goes into the hands of customers. Our products deserve your trust. Twin Eyelet Design on Both Ends -Boat fender 10 x 30 inches is designed with reinforced twin eyelet at both ends to meet customers various suspension needs, and can be hung vertically or horizontally. You have no need to worry about sudden breakage at any time. A Helper for Protecting Your Boat -Boat dock fenders equipped with 4 boat fender lines can protect your boat from getting scratched and damaged when tied up at the dock and around other boats. Meanwhile, boat fender bumper with ribbed on all sides can increase friction and resist abrasion, making it strong enough to withstand the impact of external forces. It is a must for you to reduce the risk of ship damage and save repair cost. A Complete Range of Matching -We offer you 4 x boat bumpers for docking, 4 x 6.56ft the same color boat fender ropes38-inch diameter and Inflate needles, 1 x air hand pump. With the help of the above tool, you can be easy easy to inflate and deflate. One person can quickly inflate all four fenders in 10 minutes without any complicated procedure. Wide Application - The 4 pack of boat fenders is perfect for use on boats, ensuring that you have enough coverage to prevent any damage while docking. They can be used in a wide range of ship types and areas, such as canoe, yachts, speedboats, sailboat, docks, pontoon and etc. Last but not least, these fenders some times can be used as a life-saving tool and also be an excellent choice as an anchor buoy.

ULTIMATE PROTECTION FOR DOCK CORNERS BOATSInstall OCEANBROAD heavy-duty dock corner bumpers to create a robust, permanent protective barrier that shields both your dock's vulnerable corners and your boat's hull from costly collision and scraping damage. This professional solution effectively prevents impact damage during docking, in harsh weather, or from accidental contact, saving you significant repair costs over time.. HEAVY-DUTY MARINE-GRADE PVC CONSTRUCTIONEngineered from premium, high-density UV-resistant PVC with reinforced integral ribs, our dock bumpers are built to withstand the harshest marine environments. They resist fading, saltwater corrosion, and extreme temperature fluctuations, ensuring long-term toughness, flexibility, and resilience against impact and tearing. Temperature-induced hardness variations in PVC don't compromise its functionality.. COMPLETE SECURE INSTALLATION KITEach set includes 2 dock bumpers, 12 stainless steel screws, and 12 matching washersproviding everything needed for a permanent, rust-proof installation. The premium hardware allows for straightforward, one-time mounting to create a secure protective fixture that requires no seasonal adjustments or removal.. REINFORCED RIB DESIGN FOR IMPACT ABSORPTIONThe curved profile and robust external ribbing are scientifically designed to absorb and disperse impact energy. This design not only minimizes hull friction and abrasive wear but also significantly reduces lateral forces on both your boat and dock, promoting safer and easier docking even in challenging conditions.. OPTIMIZED SIZE FOR CORNER COVERAGE UNIVERSAL FITPrecisely measuring 15.7 inches in height and 7.9 inches in widthdepth, these corner bumpers provide comprehensive protection for standard dock corners. Ideal for installation on straight edges and corner surfaces of both floating and stationary docks in residential, commercial, and marina settings..

PROTECT YOUR PWC Prevents costly scratches and impact damage when docking, keeping your jet ski looking pristine ride after ride. Compatible with Seadoo accessories, Kawasaki, Yamaha and Waverunner.. FAST, SECURE HASSLE-FREE Hinged design hugs your PWC tightly, while the clip-on system and elastic cords ensure a snug, no-slip fit in rough waters.. EASY STORAGE QUICK DRYING Includes a breathable mesh bag so your fenders dry fast and store compactly inside your PWC, ready for your next adventure.. DURABLE BUILT TO LAST UV resistant, high-density closed-cell foam wont absorb water, degrade in the sun, or lose shape lasting season after season.. AMERICAN BRAND We are a family owned American business committed to making premium quality boat and RV accessories, care and cleaning supplies. We stand behind your satisfaction and our products including our Dock Fenders and Jetski Bumpers..

Premium material selection Made by durable EVA marine grade material that performs well on UV, seawater corrosion that last long. Excellent protection Marine grade EVA material Sebnux boat fender can provide amazing crash proof level to your boat make sure it secures. Comparing tradition boat fender, Sebnux no knot boat fender easily attaches and set up without rope and hassle. Also, Sebnux EVA boat fender will not bounce around and are capable of wedging themselves out of the space between boat and dock. Integrated automatic locking system with extra-long strap easily attach boat dock, deck to make boat secure without complex knot and tight rop. Sebnux EVA boat fender size Suitable for boats betwwen15 and 25 feet long, we suggest you use one for every 10 feet of boat length, for boats between 15 and 25 feet then need tow fenders, for boats under 30 feet, at least three fenders.

You Will Receive 2 boat bumpers for docking, ensuring you have everything you need for a secure and easy installation This set provides a complete docking solution, catering to all your docking needs The bumpers effortlessly shield your boat and dock, making it a necessity for every boat owner. Quality Material Construction our boat hull protectors are crafted with UV and rip resistant vinyl, polyester tri laminate, and high density closed cell foam. These quality materials can withstand considerable force and severe weather conditions, ensuring long lasting. This serviceable construction gives the bumpers an edge, making them an ideal choice for protecting your boat. Easy Installation these boat buoys bumpers come equipped with metal grommets for an effortless installation process. The bumpers can be conveniently affixed to boats, docks, and posts, providing an optimal protective layer against scratches, dents, and nicks. The grommets ensure a secure attachment, making the installation process hassle free. Comprehensive Coverage our dock bumpers marine measure about 48 inches in length, offering a wide protective layer. This long length ensures your boat is shielded from scratches, dents, or others during docking or mooring. The comprehensive coverage ensures the complete protection of your boat's edge. Versatile Design the boat dock bumpers are designed with versatility in mind. They are suitable for straight edges, the same 2 pieces can also fit corner edges. This versatile design makes the bumpers a practical choice for daily docking needs, giving you the flexibility to adequately protect your boat in any docking situation.

MARINE FENDER QUALITY From Taylor Made, a trusted name in marine fenders with over 100 years of quality and innovation, this 4-pack gives boaters dependable hull protection for docking, mooring and rafting.. HEAVY-DUTY BOAT PROTECTION Flexible marine-grade vinyl helps cushion impact for boats up to 25 ft long, making these fenders ideal for pontoons, bass boats, fishing boats and recreational craft.. RIBBED NON-ROLL DESIGN Ribbed sides help reduce rolling and keep each boat bumper positioned against the hull for more consistent protection during docking, marina stays or changing water conditions.. VERSATILE TWIN-EYE FENDER Twin-eye design allows vertical or horizontal hanging to match your docking setup, boat height and preferred fender placement compatible with standard fender lines or rope, sold separately.. 4-PACK, NO ROPE INCLUDED Includes four 6 x 22 boat fenders only, giving you broad side protection for common docking setups while clearly leaving rope choice to your boat, cleat and rail configuration..

VERSATILE PROTECTIONOur dock and post bumpers can be installed with the sturdy one-inch flexible tab as a fold over or a top deck mount-your choice. These bumpers will offer long-lasting protection with either option for your boat and dock. DURABLE Made with a strong polyester textile cover and a closed-cell foam inner cushion, these Taylor Made dock and post bumpers withstand the rigors of the marine environment and will not fade in the sun. These will last for many boat seasons. A VARIETY OF PROFILES Available in a wide range of sizes up to 50, our dock bumpers are sure to fit your specific dock or vertical posts. The flexible material works well with stubborn corners and hard to fit curves -for the best all-around protection. UNRIVALED QUALITYEngineered and designed for the marine industry, our Taylor Made dock bumpers are made from the brand who has set the design standard for more than a century. From the flexible material to the secure installation tab-quality abounds. MADE IN THE USA Our boat dock bumpers for boats are built in the USA. Boaters know they can trust Taylor Made to deliver the highest quality products and most protection when they are on the water-the top choice of boaters everywhere.

PREMIUM PROTECTION - Crafted from robust EVA foam, our Boat Fenders offer complete cushioning, effectively absorbing and dispersing collision forces They excel in UV and seawater resistance, ensuring superior protection for boats The durable polyester straps facilitate easy and secure fastening to the dock or deck These reliable defences provide boat owners with peace of mind. SIMPLE INSTALLATION - Utilizing locks, the strap easily attaches to the boat dock or deck Designed with a modular structure, the installation and removal processes are convenient Boat owners can effortlessly adjust it as needed using cables and locking structures. BOAT FENDER SIZE - The VIVOHOME Boat Fenders measure 16.5 x 7.4 inches, catering to a diverse range of boat sizes Generally, for boats with a length under 10 feet, it is recommended to use 2 fenders, while those between 10 to 20 feet usually need 3 fenders Following this analogy, it is recommended to add one extra fender for every 10 feet increase in boat length to ensure complete protection. VISUAL APPEAL - Beyond providing protection, our Boat Fenders elevate the aesthetic of your watercraft Offered in black, gray, and blue, these fenders not only ensure functionality but also enhance the visual appeal of your boat, marrying style with practicality. VERSATILE USE - The innovative design seamlessly caters to a variety of boat sizes and styles, including yachts, sailing dinghies, bass boats, pontoon boats, bridge slide boats, ski boats, and fishing boats Beyond delivering top-notch protection, these fenders also elevate the overall aesthetic of your ship, combining functionality with style.

Package includes You will get 4 pieces boat bumper clips,they will perfect fit for pontoon boat railings, they are easy to get on and off, and to move fenders around to different locations without untying them.. Boat fender clips Pontoon rail fender clip fit for the railing is a 1 in or 1.25 in square tube rail. The clips make hanging of boat fenders effortless as they easily clip on the rail of the pontoon.. Durable materials Pontoon Boat Rail Fender Clips from durable ABS plastic, strong durability and not easy to break, perfect fit railings. Great fender line keeper,They're super handy and make prepping for a stop easy enough.. Easy to use These hang bumpers for pontoon boat and they will work great, they hold well and can take some pull without coming off or breaking. These make it easy to move up and down the rails as needed or add more for needed protection on one side.. Wide Applications Pontoon boat square rail fender hangers for lines up to 38 inch,very sturdy, and the bumper easy to attach to the rope. These pontoon fender protectors allow you repositioned quickly and easily to move you bumpers from side to side..

Full Coverage Protection Reinforced dual-layer PVC construction absorbs impacts from all directions, shielding your boat from docks and other boats.. Quick Deflation Space-Saving Design This boat bumpers can be deflates in one min with electric air pump Not included. Stores effortlessly in tight spaces like glove boxes or deck compartments.. Dual Rope Anchoring System Wauffua boat fenders are with two anchors and two fixing ropes, ensure 2X tighter grip than single-rope designs, even in 40 mph winds.. Ultra-Lightweight Portable Weighs only 13.78 lbs per boat fender for docking 30 lighter than rubber or plastics models. Includes a carry pouch for easy transport to docks or between boats.. Durable Material Premium PVC material resists punctures, saltwater corrosion, and UV damage. Lasts 2X longer than traditional boat bumpers fenders..

FINALLY A PWC FENDER THAT ACTUALLY WORKS Are you frustrated with getting scratches on your Jet Ski every time you dock it Have you tried other PWC bumpers that simply don't work After struggling with this same problem for years, we designed our TriFenders as the Ultimate Solution to Safe and Convenient JetSki Docking. For Maximum Protection, we recommend using 2 fenders per PWC.. OFFERS MAXIMUM PROTECTION FROM DOCK RASH With a Unique Patented Design, our marine fenders offer 18 in 45 cm of horizontal as well as vertical padding which is 3 to 5 times more than other PWC fender bumpers on the market. The Extended Contact Area prevents the fenders from dislocating during wakes or tide movements and ensures maximum protection from dock rash and scratches.. QUICK SECURE ATTACHMENT, SOFT LOOPS INCLUDED Two bottom-mounted U-hooks connect quickly and securely to the rub rail on any PWC. The top hook connects to a preinstalled soft loop included or other attachment points. The Adjustable-Length Bungee Cord provides tension to Keep the Fenders In Place and flexibility to Use Any Attachment Point on your Jet Ski. A safety latch Prevents Accidental Decoupling Loss.. UNIQUE FOLDABLE DESIGN THAT'S EASY TO STORE We designed the WavesRx Jet Ski TriFenders to Maximize Protection while Minimizing Storage Requirements. Simply fold the top padded section between the two bottom sections which reduces the overall size to only 18 x 7 x 3 and easily fits into your PWC's front storage compartment. It even comes with a free Ventilated Storage Bag.. CONFIDENCE PEACE OF MIND - Powered by our relentless pursuit of Quality and Innovation, we stand behind our commitment with a generous 3-Year Hassle-Free Replacement Warranty. This dedication to excellence is further reinforced by our patented technology, recognized with patent number 11873066. Your satisfaction is not just guaranteed it's innovatively protected..

100 SOLID EVA NO DEFLATION WORRIES Say goodbye to popped or deflated traditional sausage fenders. Designed for safety-conscious captains, our boat fenders are crafted from premium, high-density solid EVA foam. They provide superior impact absorption and reliable hull protection without the need for an air pump, saving you time and money on replacements. INNOVATIVE MODULAR STACKING DESIGN Need protection for larger boats or taller dock pilings Our dock bumpers feature a unique multi-hole design that allows for versatile modular stacking. Use one pack for single verticalhorizontal hanging, or easily combine two packs side-by-side, stacked horizontally, or even in a T-shape. Customize your protective barrier to perfectly fit your specific mooring needs. BUILT FOR HARSH MARINE ENVIRONMENTS Whether facing choppy waters, storms, or glaring sun, these pontoon boat accessories are built to last. Engineered to be highly UV resistant, corrosion resistant, and impact resistant, they will not fade, degrade, or crack over time. Perfect for seasonal lake activities, harsh saltwater marinas, and unpredictable waterfront environments. NON-ROLLING DESIGN HASSLE-FREE DOCKING Unlike round inflatable bumpers that roll out of place, our 17x8 inches flat fenders feature a textured, contour-hugging design that stays exactly where you hang it. Plus, the included braided ropes and custom blue adjuster blocks allow for quick, hand-operated height adjustments without struggling with complicated rope knots. SIZING GUIDE FOR OPTIMAL SAFETY To provide the ultimate cushioning barrier during boat-to-boat rafting or docking, we recommend one fender for every 10 feet of boat length. Generally, boats under 10 ft need 2 fenders, 10-20 ft need 3 fenders, and vessels up to 30 ft need at least 3 fenders. Available in 1, 2, or 4 packs to protect your boat's resale value and give you peace of mind.

High Quality MaterialMade of durable and lightweight marine-grade EVA material, UV and waterproof. , prevents discoloration from salt water or boat cleaners. Unlike traditional inflatable boat fenders, it is higher-quality and does not require inflation.. Boat ProtectionThe innovative suspension system can be easily positioned on the boat or dock, preventing scratches and damage to your boat. At the same time, the innovative shield-shaped design with bumpers and thickened ribs also provide strong protection.. Easy to InstallThe package includes 2 boat fenders, two 5.25ft ropes and 2 instruction manuals. The extra-long line can be looped around the higher connection and easily attached to a boat or dock. Connect, adjust and lock, installation can be done quickly.. Widely ApplicationBoat bumper is suitable for bass boats, jon boats, pontoon boats, ski boats, fishing boats or marinas. One fender per 10 feet of boat length is recommended. Please choose the fender according to your boat size.. Why Choose UsIf you have any pre-sale and after-sale problems, we always provides you with a satisfactory solution. Any questions, please feel free to contact us, we will solve it for you within 24 hours.

Boat fender is made of commercial strength marine vinyl, UV- Protector and chemically resistant ribbed body for unsurpassed durability and long time service. Protect boat from damage when dock or against other vessels.. Inflatable design, equipped with an easy valve system to adjust fender to a desired pressure, very handy to use and take only 3-5 seconds to inflate.. Reinforced molded eyelets on each finder allows hung vertically or Horizontally, enough to withstands everyday usage, no signs of wear.. Perfect for different kind of boat, pontoon,speedboat, ailboat, etc for docking protection.. Set of 4 8.5 x 27 Ribbed Marine boat fenders with 4 x 6ft length fender lines, 4x boat fender ropes, 1x air pump and 2 needles..

Lightweight, UV resistant polymeric is easy on hulls. Double molded eye ends allow for a variety of tying options. Seamless one piece construction - comes in white. Consumer will receive one oval boat fender upon purchase. Limited lifetime warranty.

Includes pair of fenders 24 x 6.5 x 2.5 and fender lines 38 x 6'. Protects gunwale and hull. Durable, marine-grade tri-laminate cover with double thermal-bonded seams and polycarbonate grommets. Impervious to tearing and sunlight. Two-year replacement warranty.

ONE SOLUTION FOR ANY SITUATION Modern boaters deserve a modern solution for protecting their boats and sausage fenders just dont cut it anymore. Theyre awkward, they shift, they mark, and they wreck the stylish aesthetic of your boat. ICONs pyramid profile shape prevents it from rolling and shifting, so its always in the right place.. EIGHT ATTACHMENT POINTS ICONs innovative design makes it easy to deploy and offers protection both above and below the rub rail. With eight deployment options, you can attach ICON vertically or horizontally to hug the contours of your boat and adapt to any docking environment. Patents pending.. PASS-THROUGH ACCESS The large opening in the front face of ICON allows dock lines to pass through in situations where the fender covers the boat cleat. This keeps the lines straight and ICON in perfect alignment.. INNOVATIVE MATERIAL ICON fenders are molded from XL EXTRALIGHT a revolutionary closed-cell foam thats lightweight and extremely durable. This patented material is non-marking, non-staining, and completely waterproof. It's easy to clean, salt and chemical resistant, and resists fading from the sun's harmful UV rays.. INCLUDES FENDER LINES MISSION fender lines are the perfect choice for when its time to deploy your boats defenses. Contructed with a Nylon core to reduce stress while under tension and wrapped in an abrasion-resistant polyester exterior to retain pliability. Theyre built to last and designed to perform in any environment so you can keep your boat looking like a beaut, eh.