Wide Height Range for Versatile Use Effortlessly adjustable from 30.82 to 82.28 inches, this mic stand accommodates any setup, from seated podcasting to standing performances, making it a perfect companion for musicians, broadcasters, and content creators.. Unmatched Stability and Durability Built with a weighted 5.8 lb base and reinforced 25mm thickened poles, this stand is engineered for superior balance and long-lasting reliability, outperforming others with lighter bases and thinner poles. Whether on stage or in the studio, your microphone remains secure and stable.. Customizable Setup Options Offering two configurationsuse with the boom arm for extended reach and precise mic placement, or without for a compact setupthis stand adapts seamlessly to diverse recording and performance scenarios.. Exceptional Adjustability for Perfect Angles Achieve professional-level sound capture with a 360-degree rotatable boom arm and a 180-degree flexible mic clip. Fine-tune your microphone positioning effortlessly for clear, high-quality audio in every session.. Broad Compatibility for All Your Needs Compatible with FIFINE AM8, Audio-Technica AT2020, Blue Yeti, HyperX QuadCast, Shure SM58, Samson Q2U, Fifine K669B and more, this stand comes fully equipped with a 38 to 58 adapter, mic holder, and mic clip. Designed for podcasting, studio work, and live performances, it ensures your equipment is always ready to deliver..

Height Adjustable Stable By adjusting the clutch, the height of this InnoGear mic stand is adjustable from 32 inches to 70 inches, used for person standing or sitting. Compared to other stands using three height clutches on the market, this stand uses only one height clutch and one separate extension pole which is connected by a long screw adapter to improve the stability.. Flexible Gooseneck The gooseneck is 360 adjustable, being flexible to adjust for singing or for an instrument. It can be positioned at whatever angle you need it at. Meanwhile, it is of high quality and is sturdy enough to support your microphones. The included mic clip is able to be rotated by 180.. Heavy-duty Round Base The weighted round base of the mic stand weighs 4.5 Lbs in the diameter of 9.8 inches, being more stable and having larger bearing capacity, unlike other tripod stands. The bottom of base is built with 6 non-slip pads. An upgraded fixing loop is added between the connection of base and the boom stand to further enhance stability and avoid any wiggle.. Detachable Portable Stand This gooseneck floor stand can be disassembled into four parts in seconds. It is easy to carry and install which provides great convenience for various types of activities like stage, studio, road show, concert, outdoor performances and more.. Wide Compatibility This upgraded mic stand fits for most types of microphones like HyperX QuadCast, Fifine K669B Attention Shock mount not included, Blue Snowball iCE, Blue Yeti, Audio-Technica AT2020, Audio-Technica AT2035, Samson Q2U, Razer Seiren X, Shure SM58, Shure PGA48, Shure SM7B and so on..

Space-Saving, Ultra-Sleek Design With the lower arm sitting just 3.35 inches above the desk, this mic arm stand stays discreet while freeing up valuable desk spaceperfect for minimalist setups, small workstations, or cluttered streaming desks where every inch counts.. Integrated Magnetic Cable Management The built-in snap-on magnetic cable channel makes setup effortless just press to lift and snap wires into place. Unlike bulky external hooks that tangle and snag, this sleek design keeps cables completely hidden and tangle-free for a professional, clutter-free look.. Full-Range Adjustability A full 360 base rotation, 180 swivel, 170 tilt, and 360 shaft rotation give you studio-grade flexibility, ensuring your mic stand is always in the ideal positionwhether youre standing, sitting, or switching between setups.. Rock-Solid Stability Engineered from solid alloy steel, the upgraded InnoGear low-profile arm stand combines durability with functionality. With a maximum payload of 1.5 kg 3.3 lbs, it effortlessly supports your microphone setup while ensuring a secure connection. Assembly is quick and hassle-freesimply insert the arm into the table mount and tighten the knob for a stable, reliable setup.. Secure C-Style Clamp Crafted from robust alloy, our C-style clamp ensures unwavering stability for both your mic and desk setup. Designed with ample contact area and rubber padding, it expertly secures to desktops up to 2.36 inches thick flat edges only, safeguarding against marks or scratches. Enjoy seamless, noise-free adjustments during recording or streaming sessions, courtesy of its impeccably smooth operation and steadfast grip.. Universal Compatibility This mic arm includes two screw adapters for broad device support. The 38 to 58 adapter fits HyperX SoloCast 2, HyperX QuadCast 2 S, Razer Seiren V3 Mini, HyperX QuadCast 2, Blue Yeti, Blue Snowball, Blue Snowball iCE, Hyper X QuadCast, SoloCast, Shure SM7B, MV7, Fifine AmpliGame, Fifine K669B Shock mount not included, Fifine AM8 and etc. The 38 to 14 adapter extends compatibility to devices with 14 thread hole like Blue Yeti Nano, Logitech webcam C930, C925E, C920C920s and so on..

Upgraded Aluminum Alloy for Ultimate Stability Constructed from high-grade aluminum alloy, this microphone boom arm offers a much sturdier and more stable support system than standard steel stands. The premium material boasts a 3.3lb1.5kg load capacity while effectively reduces unwanted vibrations and prevents wobbling during intense gaming or recording sessions. 360 Flexible Adjustment and Precision Positioning Achieve the suitable audio angle with unmatched flexibility. This mic arm features a 360 horizontal rotation at the base, a 210 wide angle between arms, and a uniquely designed head that rotates 360 horizontally and 180 vertically. Whether you are sitting or standing, can position your mic with precision for clear voice capture. Universal Compatibility for Professional Mics This microphone arm stand comes with a 58 to 38 adapter for Blue Yeti, Blue Snowball iCE, Blue Snowball, HyperX SoloCast 2, HyperX QuadCast 2 S, HyperX QuadCast 2, Hyper X QuadCast, Razer Seiren V3 Mini, SoloCast, Shure SM7B, MV7, Fifine AmpliGame, Fifine K669B Shock mount not included, Fifine AM8, etc. And a standard microphone clip to fit for dynamic microphones like Shure SM58, Samson Q2U, Shure PGA48 and more. Space-Saving C-Clamp Mount Easy SetupThe C-clamp securely attaches to most flat-edged not slanted or curved desks and fits desks up to 2.5 inches thick, providing a firm grip without slipping or damaging your furniture. By elevating your microphone off the desktop, it saves valuable workspace for your mouse and keyboard. Neat Cable Management for Streamers Keep your recording area tidy and organized with the 3 included cable management ties. These reusable hook and loop ties allow you to secure your XLR or USB cables along the length of the boom arm, preventing messy wires from tangling or pulling. Ideal gift for gamers, podcasters, and YouTubers. Note Please tighten the knob on the stand before use to ensure it is stable and prevent loosening or tilting, so as to effectively support the weight of the microphone.

Superior Stability Durability Crafted from premium steel with a weighted 2.4lb base, this microphone stand offers unmatched stability and can support up to 2.64 lbsfar exceeding competitors limited to 1.98 lbs. Perfect for heavy-duty microphones and equipment.. Universal Compatibility for All Your Devices With included universal adapters 38 to 58 and 38 to 14, this mic stand seamlessly works with microphones, webcams, cameras, and more. Ideal for content creators, gamers, and professionals seeking versatility.. Ultra-Flexible Positioning with Precision Control Featuring two pivot points and a 270 flexible angle adjustment, this table stand allows for precise positioning. The included Allen Wrench ensures secure adjustments without overtightening or damaging the stand, unlike other stands with traditional adjustment knobs PLEASE NOTE The included Allen Wrench is located on the back of the desktop stand base.. Compact Portable Design With a compact base measuring just 6.7 x 4.7 inches and a foldable microphone arm, this microphone arm stand is perfect for small spaces and easy to transport, making it a great choice for on-the-go creators.. Non-Slip, Scratch-Free Stability The weighted base is equipped with non-slip pads, ensuring your desk stays scratch-free while providing added stability during use. No more slipping or slidingjust reliable performance..

Instant-Lock Mechanism Say goodbye to annoying knobs and height clutches. Our instant-lock mechanism lets you adjust mic stand height with a simple pull and press actionno twisting, no fumbling. Achieve your preferred height in one smooth motion, perfect for quick adjustments during live recordings or streaming sessions.. Perfect Height Range Whether you're seated at a low desk or standing with a standing desk converter, this microphone stand for desk adjusts from 11.26 inches to 16.14 inches. Find your ideal microphone position effortlessly, reducing neck strain and improving sound quality with proper mouth-to-mic placement.. Rock-Solid Stability The upgraded mic stand base measures 5.91 inchesa full 15 larger footprint than others' 5.12-inch bases. This enhanced stability means your microphone stays perfectly in place, even during animated podcasts or energetic voiceovers. No wobble, no tipping, no worry.. Strong Compatibility With a 38 to 58 adapter, the desk mic stand is compatible with Blue Yeti, Blue Yeti Pro, Blue Snowball, HyperX QuadCast, SoloCast, Fifine, AT2020, Razer Seiren X, and other microphones. The package also comes with a mic clip with a max diameter of 1.26, compatible with dynamic microphones such as Shure SM58, Shure SM48, Samson Q2U, Shure PGA48, etc.. 3.3 lbs Load Capacity Built from high-quality metal, this desktop mic stand supports up to 3.3 lbs50 stronger than the typical 2.2 lb max load capacity found on other desk mic stands. Heavier mics stay secure, and the smooth, quiet positioning ensures no creaks or squeaks ruin your live recordings or studio sessions..

Professional Mic Boom Arm for Blue YetiThis Adjustable Microphone Stand is specially designed for Blue Yeti, Yeti Pro ,Blue Snowball, Blue Nano, Hyperx Quadcast, or Shure microphones, with a metal shock mount and pop filter. High-quality steel material with super-strong springs ensures an excellent load-bearing capacity of 3.3 lbs1.5kg, keeping your mic properly balanced without sinking, shaking or making noise. Suitable for gaming, singing, studio recording, broadcasting, and family performances.. Top Grade Metal Shock Mount Special designed for Blue Yeti Series Shure mics. Unlike other shockmount that are made of plastic, ChromLives upgraded shock mount is made of metal. Upgraded design helps shield your microphone from vibrations, shock pops and distortions to ensuring a crystal-clear recording. Package includes 38 to 58 adapter, 14 to 58 adapter and mic clip to ensure universal compatibility, allowing you to use a wide range of microphones with ease.. Upgraded Table Clamp This new microphone arm desk mount contact area is from 38 cm to 47.5 cm with. By increasing the contact area, stability has been greatly improved, meanwhile a silicone pad has been added to the bottom to protect tabletop from scratches.This padded clamp thickness up to 1.77 inch45mm, suitable for most table and desks.. Perfect Mic Covers Pop Filter Windscreen cover for Blue Yeti made of high density foam, it effectively reduce breath, wind noise and other unwanted background noise to improve the audio quality. Pop filter for Blue Yeti, Yeti Pro ,Blue Snowball, Blue Nano, Hyperx Quadcast, or Shure microphones with double layer mesh, it can block air blasts and pops when recording vocals and ensure ensuring your voice won't be stifled or muffled. These microphone accessories wolud keeps your microphone safe from harmful, dust and moisture.. All-in-One Combo Pack The mic arm stand set for blue yeti includes all the items you need for studio recording and live sound. It contains 1upgraded mic boom arm, 1table mount clamp, 1 pop filter, 2microphone foam cover blue yeti mic cover universal mic cover, 1 upgraded mic clip, 1universal mic clip, 1metal shock mount for blue yeti, 2converter screw 38 to 58 adapter14 to 58 adapter and 5cable sleeves, all in one for Blue mic stand desk, easy to assemble and carry..

Solid Stability Constructed with heavy-gauge steel and a weighted round base measuring 5.12 13cm in diameter, our table mic stand is designed to maintain reliable stability for daily use. The four non-slip pads under the base help reduce minor vibrations and prevent tipping, while also protecting your table surface from scratches.. Adjustable Height Designed with a compact range for desktop setups, this stand adjusts from 5.5 to 8.26. Simply twist the clutch knob to smoothly raise or lower your mic position to your preferred angle. Easy to adjust and locks securely in placeonce tightened, the stand holds your microphone firmly to minimize slippage during use.. Bearing Strength Our robust metal construction delivers durability and reliable support for standard and moderately heavy microphones. It keeps your mic in place effectively.. Mic Compatibility Our FIFINE BS1 mic stand comes with a built-in 38 thread and includes an extra 58 male to 38 female screw adapter. Designed to work with most microphone brands on the market, it fits FIFINE AM8, K688, Shure, Hyperx, and other standard microphones. Note The handheld microphone clip needs to be purchased separately. The product does not include a microphone clip.. Easy to Set Up Get ready to record or stream in just two simple stepsattach the stand to the weighted round base, and screw your mic in firmly. This portable tabletop stand is perfect for studio recordings, gaming streams, or podcasting right out of the box..

Professional Adjustable Microphone StandProfessional Recording Studio Equipment with adjustable microphone stand, Adjustable Shock Mount, double layer Pop Filter , Screw adapter, microphone shock mount, Table mounting clamp with sponge pad. The diameter of ABS plastic microphone shock mount is 1.77''4.5 cm,it can be changed by adjusting the O-rings of shock mount,compatible various mic.Max diameter2.05''5.2 cm.. Strong Compatibility and Applicability microphone arm Luling Arts mic arm could compatible with the Blue Yeti, Snowball or mount most standard-sized microphones. 38'' to 58''Screw adapter are line with industry standards. Adjustable shock mount and universal mic clip also provide more possibilities.Max Support Weight is 70 oz2 kg 4.4 pound.. Upgraded table mounting clampDesigned for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up to 2.16The product is 6 cm to fit most desktop can carry heavy microphone for a long time.. Excellent Shock Mount Effect The diameter of the mic clip can be changed by adjusting O-rings on shock mount, perfect suit for mics with a diameter of more than 4.5cm. The professional suspension shock mount isolates most studio condenser mics from physical vibration, floor, and stand noise. Take Your Recording and Streaming to the Next Level.. Two-Screen POP Filters The first screen blocks air blasts as any pop filter normally would The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Banish the dreaded hissing and lisping sounds that come when pronouncing the letter S and blocks those ugly plosives that follows B and P.with great customer service, Luling Arts offers 12-month repairreplacement and 30-day hassle-free return..

Package included 1x Windscreen for blue yeti, 1x Mic Scissor Arm Stand.. Sturdy Mic Stand - Made of sturdy steel construction, dual suspension springs of each boom arm holds the mic right in place with no sagging, drop or jiggle.. Super Windscreen - Designed for Blue Yeti, well breathable, filter the sound of wind and other unwanted background noise to improve your sound quality.. Folding Type - Match with the swivel table shock mount and adjustable mic mount, you can easily adjust the mic to the suitable angle or height to show your perfect voice.. Stability - Dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise..

Superior Design Our microphone stand features an upgraded design for enhanced stability and better overall quality. Its built-in spring mechanism ensures both safety and aesthetics, reducing noise and preventing injury from external springs or rebound arms. With its superior design, our blue yeti mic stand provides enhanced stability and safety during your recording sessions.. Heavy Duty Construction Made of sturdy metal, this blue yeti boom arm securely holds your Blue Yeti and Snowball microphones, effectively reducing noise and vibration. The 360-degree rotation and horizontal reach of 27 inches allow for maximum flexibility during recording sessions. With its heavy-duty construction, our boom arm ensures a durable and reliable microphone setup for professional audio quality.. Excellent Shock Mount Our boom arm with shock mount is specifically designed for Blue YetiPro, Blue Yeti X, Blue Snowball and other microphones. Crafted from materials, this microphone stand effectively reduces vibrations and unwanted noise, allowing for clear and professional sound recordings. The cotton pad between the shock mount and the microphone bottom prevents scratches, providing added protection to your valuable equipment.. Efficient Noise Reduction and Space Organization Our microphone pop filter provides excellent protection against plosive sounds and unwanted noise, delivering professional audio recordings every time. Designed to perfectly fit Blue Yeti microphones, it ensures optimal sound quality for your recordings. Additionally, the mic stand desk comes with cable ties for effective cable management, allowing you to keep your workspace neat and tidy.. Upgraded Table Clamp Our desk mount microphone boom arm features an upgraded table clamp with a sponge pad that effectively prevents slippage and protects the desk from damage. This ensures a stable and secure placement on desks up to 2 inches thick. With its enhanced table clamp, our microphone desk stand provides a reliable and convenient solution for your recording needs..

Streamlined Low-Profile Arm Stand Elevate your workspace with our sleek low-profile boom arm, designed to seamlessly integrate with your desk setup. With its minimalistic design, this arm discreetly tucks beneath your monitor, ensuring an unobstructed view of your surroundings. Say goodbye to clutter and hello to a clean, professional workspace.. Ultimate Adjustability Experience unparalleled flexibility with our fully adjustable boom arm. Extendable up to 25.6 inches, it offers complete coverage for any recording or streaming setup. With a vertical adjustment range of 250 and a horizontal rotation of 360, you have the freedom to position your microphone precisely where you need it for optimal performance.. Robust Construction Engineered from solid alloy steel, the InnoGear MU-LP26 mic stand combines durability with functionality. With a maximum payload of 1.5 kg 3.3 lbs, it effortlessly supports your microphone setup while ensuring a secure connection. Assembly is quick and hassle-freesimply insert the arm into the table mount and tighten the knob for a stable, reliable setup.. Secure C-Style Clamp Crafted from robust alloy, our C-style clamp ensures unwavering stability for both your mic and desk setup. Designed with ample contact area and rubber padding, it expertly secures to desktops up to 2.75 inches thick, safeguarding against marks or scratches. Enjoy seamless, noise-free adjustments during recording or streaming sessions, courtesy of its impeccably smooth operation and steadfast grip. Also, it doubles as a convenient headphone hook for added versatility.. Universal Compatibility Designed to accommodate a wide range of microphones, this microphone stand ensures compatibility with Hyper X QuadCast, SoloCast, Fifine K669B AM8, Blue Yeti, Shure SM7B, AT2020, and more. The included 38 to 58 , and 38 to 14 screw adapter expand your options to use with not only mics but webcams and ringlights, while the universal mic clip is perfect for dynamic microphones like the Shure SM58, Shure PGA48, Shure SM48. Whether you're a seasoned professional or just starting out, our boom arm has you covered..

Larger Base Diameter and Heavier Weight Enhanced with a sturdy metal base measuring 5.12 in diameter and weighing 1.85 pounds, the mic stand ensures stability and surface protection with four non-slip pads.. Adjustable Height Effortlessly adjust the desktop mic stand's height from 10.6 to 15.4 with a secure screw-in knob, providing superior stability compared to snap-on knobs prone to loosening over time. This ensures the boom mic stand maintains its height without any sliding down.. Upgraded Load bearing Capacity High quality metal material ensures an excellent load bearing capacity of up to 3.3 lbs, compared to others of 2.2lb max load capacity InnoGear microphone stand allows seamless, quiet positioning, crucial for live recordings.. Strong Compatibility With a 38 to 58 adapter, the desk mic stand is compatible with Blue Yeti, Blue Yeti Pro, Blue Snowball, HyperX QuadCast, SoloCast, Fifine, AT2020, Razer Seiren X, and other microphones. The package also comes with a mic clip with a max diameter of 1.26, compatible with dynamic microphones such as Shure SM58, Shure SM48, Samson Q2U, Shure PGA48, etc.. Portable Convenient Easily transportable and simple to set up, fitting into a laptop bag without occupying much space. Ideal for conferences, churches, and public venues..

Compact and Weighted Base With 4.3x4.7 base, InnoGear desk microphone stand doesn't taking up much space. The base is weighted 1.32lbs for MAX load 3.3lbs when using heavier microphones that need additional balance. It is constructed of heavy-duty steel for long-term performance.. Triangle Gravity Design Unlike other mic stand with central gravity, InnoGear table mic stand provides more stability and precise balance to keep microphone from topple-over.. Adjustable Height This stand measures 10.2 inches in height and is adjustable up to 15 inches to allow for optimal mic positioning.. Compatibility Package includes 38 and 58 adapter, making it compatible with many microphones like Blue Yeti, Blue Snowball, AT2020, AT2020USB, AT2035, ATR2500-USB, ATR2100-USB, etc.. High Quality Shock Mount It can protect your microphone all-around with high elasticity wrap roping desigh and reduce vibrations from traveling into the microphone. Please noted the shock mount is not fit for Blue Yeti..

Extra High Extension Riser - This Overhead Desk Mic Stand features a 31.5in80cm high riser, perfect for Overhead Mic Stand setups. It effortlessly crosses monitors, letting you record in ideal positions without blocking screens. Unlock creativity and max out space use with this mic arm design.. Sturdy Construction - The Overhead Microphone Stand uses thickened, heavy duty steel for its riser and stand. Stable as a rock for your mic boom arm Upgraded clamps grip desktops up to 4.2in106mm thick tighter durable, secure, and built to last.. Full Range Motion - Mount this Desk Mic Arm on your desktop edge. Adjust the riser height and swivel the extension arm, switch between sittingstanding effortlessly. A mic arm with wide-range motion, ideal for broadcasting, recording, podcasting.. Tool-Less Adjustment - The boom arm mic stand desk joints have quick-moving clip, tweak your microphone arms heightangle anytime, no tools needed. Easy to operate, boosts recording quality fast.. Universal Compatibility - This overhead microphone boom arm comes with 3858 and 1438 adapters. Fits mics like HyperX Quadcast S, Shure SM7B, Shure MV7, Blue Yeti, AT2020. Perfect for recording, gaming, live streaming. A microphone boom arm for every setup.

Low Profile Design The mic arm desk mount uses a low profile design so you can use it from under your monitor and offers an adjustable height from 5.7 to 27.8. We also include a detachable rise column to offer more height making it ideal for any setup. Upgraded Features Headphone holder on the clamp provides both a convenient place to hang your headphones and frees up valuable space on your desk.. It also includes a 14 mounting adapter, providing versatile functionality for attaching a camera, webcam, or phone holder.. Sturdy And Stable Build Our desk microphone stand boom arm is made using sturdy metal to offer more stability and durable enough to provide long term use. Its resistant to rust and corrosion as well as featuring an anti-torsion construction for everyday use. Easy To organize And Use This desk stand microphone boom arm uses a clamp installation so you can easily mount it on a wide range of desks. It features a built-in cable organizer so you can reduce clutter on your desk and keep cables neatly out of sight. Rotatable And Adjustable The low profile boom arm for microphone is fully adjustable and offers a 360 swivel for the microphone so you can speak, sing, and record at a comfortable angle. The adjustable head and joint allow you to get the position of the mic just right every time. Versatile And Multi-Purpose The low profile mic arm features a 38 mount to provide a suitable fit for most streaming and podcast microphones. In addition, a 58 and 14 adapter is also available in the box content. Our desk mic stand is ideal for video recording, radio broadcasting, game streaming, online meetings, and much more whether at home or the office..

Perfect Compatibility - Microphone stand with standard 38 to 58 adapter, compatible with most standard mic - HyperX QuadCast, SoloCast, Razer Mini, Blue Yeti, Blue Snowball, Rode, Shure SM7B,Shure MV7, Shure MV7X,Fifine K669B and other mic.. Overhead Metal Mic Stand - Premium all-tube design and sturdy metal construction supports microphones up to 3.5lb 1.6kg. Equipped with an extension tube, allowing the maximum vertical height of the mic stand up to 22.7 inch. Compared with exposed springs boom arm, SUNMON blue yeti mic boom arm can be install in more places and doesn't make a sound when you adjust the angel.. Flexible Mic Arm - The weighted metal boom arm for hyperx quadcast provides 5 pivot with adjustable angle180 to 360, allows you to easily get the perfect position you want. You can adjust the tightness of the pivot so you don't need to worry about the mic dropping. Ideal for podcasting, streaming, broadcasting, live streaming and other voice recording.. Upgraded Design - This hyperx quadcast s mic stand provides with a hidden cable management channel, easy to hide your xlr or usb cable, frees up more space on your desk. High quality clamp has a silicone cushion, it won't damage your table. And the clamp has a larger contact area with the table, so the microphone stand is not easy to shake.. Package Include 1 x metal mic stand, 1 x extension tube, 1 x mic clamp, 1 x 38 to 58 adapter already mounted, 4 x cable clips, 2 x screwdriver, 1 x user manual. Easy to install your hyperx microphone to the mic arm. If you meet any question, please feel free to contact us, we will provide you with usage guidance and free replacement services..

Custom-developed Mold, 100 FitThis microphone shock mount is specially developed for Blue Yeti microphone, and it can be perfectly matched with the above products.. The Latest Model For 2026Using a custom-designed shock mount for the Yeti microphone and connecting it to a cantilevered stand, the microphone can be isolated from ambient noise, reducing post-production time and delivering a better voice capture result.. User-Friendly DesignWith this customized microphone shock mount, you can better adjust the height and angle of the microphone until it suits you. The microphone shock mount is equipped with a rotary knob for easy adjustment.. Universal Compatibility with Boom Arm StandsThis customized shock mount has a 58 interface and comes with both 38 screws 14screws, making it compatible with most cantilever stands boom arms and desktop stands on the market.. Boost Audio Quality and Reduce Background NoiseEnhance your recordings with the customized Yeti microphone shock mount, protecting your recordings from background noise and improving the sound quality of your game streaming, podcasts, Twitch streams and broadcasts.. Quality ServiceProvide 24-month replacement service and lifetime parts replenishment service..

Low Profile Wave Mic Arm Pro White features superior suspension technology for ultra-smooth, silent adjustments Its compatible with a wide range of mic brands and models Sennheiser, Audio-Technica, HyperX, Rode, Shure, Neumann, and many more. High Load Capacity Supports up to 3 kg6.6 lbs, including accessories. Gas Spring Suspension Smooth, silent adjustments without loosening screws. Hidden Cable Channels Strong magnetic covers keep cables out of sight. Secure Mount Padded clamp fits desks up to 60 mm 2.4 inches thick.

Extended 15.7 Reach Wide Compatibility, Fits Desks Up to 2.55 ThickThe upgraded arm extends to 15.7 inches, providing a max horizontal reach of 33.8 inches. The desk clamp securely attaches to desks up to 2.55 inches thick. Equipped with a universal 58 thread adapter, its compatible with popular mics like Blue YetiYeti X, HyperX QuadCastSoloCast, Shure SM7BMV7, Audio-Technica AT2020AT2035 series, and Fifine K669BAM8. 3.5 lbs Heavy-Duty Load Capacity, Holds Professional Mics FirmlyConstructed with high-strength, thickened steel and reinforced internal springs, this heavy-duty boom arm achieves a robust 3.5 lbs load capacity. It securely holds heavy microphones like the Blue Yeti and Shure SM7B without sagging or drooping, ensuring your mic stays precisely where you position it. Full-Range Adjustability with Smooth, Silent 360 MotionOffers extensive, tool-free adjustability the arm adjusts 180 forwardbackward and 180 updown, the base rotates 360, and the microphone joint swivels 210. Enjoy smooth, silent positioning to find the perfect mic angle for voice recording, gaming, or live streaming. Built-In Cable Management Channels for a Clean, Tangle-Free SetupFeatures integrated cable management channels within the arm to neatly conceal your microphone cable. Simply open the rubber covers, tuck the cable inside, and enjoy a clean workspaceno more cable clutter during streaming, podcasting, or recording. Includes Dedicated Pop Filter for Blue Yeti, Ready to Use Out of the BoxComes with a dedicated pop filter for Blue Yeti, so you can start recording with a complete setup right away. The high-quality foam effectively reduces plosives and breath noise, delivering clearer, purer vocals. It saves you the cost and time of buying an accessory separately..

Shock Mount Please noted the shock mount is not fit for Blue Yeti.It is made of high-quality material and can protect the microphone all-around with high rubber rope design which makes the microphone more convenient to install and prevent it from falling. The shock mount has a hole diameter of 52mm, which is slightly larger than others.. Heavy-duty Structure Mic Stand The extra strong spring prevents the microphone from accidental dropping, noise generation and shaking. It has a table mounting clamp and protective layers of sponge. An adjustable positioning screw can easily clip to any desktop with a thickness of 2.. Double Screen Pop Filters The first screen blocks air blasts as any pop filter normally would. The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained.. Especially Design The cable ties which adopt the self-locking fastener design, strong durable powerful lock, easy handling and prevent snagging in tight.. All-in-One Combo Package includes all the items you need for studio recording and live sound, a microphone stand, a zinc alloy table mounting clamp, a 38 to 58 metal screw adapter to make it perfect for blue yeti and other microphones, a pop filter, a shock mount and five cable ties, easy to assemble and carry..

Heavy Duty Construction The T20 is made of durable steel for outstanding bearing capacity. Max load 4lbs1.8kg.. Upgraded Desk Clamp The desk clamp has 4 times larger contact area for easily clip to any desk up to 2.4''60mm thick. In addition, the headset hook is integrated into the desk clamp.. Universal Compatibility The T20 comes with a standard 38 to 58 adapter for different shock mounts and microphones. Note The microphone and shock mount are not included.. Flexible Adjustment The T20 offers 700mm horizontalvertical distance and 360 full rotation. You can easily adjust it to get the best pickup.. All in One 1 x Boom arm, 1 x Desk clamp, 1 x Mic clip, 1 x 38 to 58 Adapter, 1 x Pop filter, 1 x Foam cover, 4 x Cable tie, 1 x Manual..

Broad CompatibilityLOAD BEARING 2.2lbs With a length of 19 inches, this microphone arm stand allows you to adjust your microphone to the perfect position with its flexible gooseneck arm. The microphone clip holder has a maximum diameter of 1.38 inches, making it compatible with a variety of standard handheld mics. The included 38 to 58 screw adapter is specifically designed to work seamlessly with Blue Snowball, HyperX SoloCast and other microphones.. Sturdy and Durable DesignThe clamp base is crafted from high-quality aluminum alloy, ensuring durability and reliability. The gooseneck, with a thickness of 0.48 and a length of 19, is coated with a premium, high-priced baking paint finish, adding a touch of elegance and providing a long-lasting, premium-quality appearance. Additionally, the considerate soft cushion on the table clamp protects your furniture from scratches.. 360 FlexibilityExperience complete flexibility with this microphone stand's adjustable gooseneck arm. It rotates effortlessly on the table clamp, allowing you to point the microphone in any desired direction. The arm is designed to bend back and forth all-round from 0 to 360 degrees at the base, providing solid and smooth movement for precise positioning. Note It cant work with Blue Yeti Blue Yeti Nano.. Durable Desk ClampThe desk clamp has been upgraded to aluminum alloy construction, ensuring durability and stability. It can easily clip onto desks up to 2.24'' thick, providing a secure attachment. Additionally, the desk clamp features an integrated headset hook, allowing you to conveniently hang your headphones or earphones when not in use. This thoughtful design keeps your workspace organized and within reach.. Flexible Mounting and PortableThis highly flexible microphone snake clamp stand is designed for effortless mounting in various locations such as desks, podiums, pulpits, coffee tables, and announcers' tables. Roll it up easily to save space, and carry liberally when traveling and on a business trip. Perfect for recording and live stream on the go.. Complete Package1 x 19-inch gooseneck microphone arm stand with an aluminum alloy desk clamp, 1 x 38 to 58 screw adapter, 1 x microphone holder that can securely hold handheld microphones with a maximum diameter of up to 1.38 inches. Please note that the desk clamp features two 14 holes, allowing you to mount it on the wall with the 14 screw screws not included..

Double Layered Screen Pop FiltersThe first screen blocks air blasts as any pop filter normally would The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained to produce great quality recordings.. Universally CompatibleAdjustable screw rotating clamp with scratch-proof gripper can secure variety tubular mounting booms or microphone stands. Eliminates anyone's extra elements that prevents them from recordingprojecting their best vocals to the public or their audience.. Adjustable GooseneckThe steel metal gooseneck holder fully supports the filter's weight and keep it in place. You can adjust the angle and distance between the screen and the microphone to best fit your needs for yours lovely voice.. FunctionsBanish the dreaded hissing and lisping sounds that come when pronouncing the letter S and blocks those ugly plosives that follows B and P. It is a great item for singers, streamers and actors alike who want help achieving the best possible performance and help protect the spitting all over your personal microphone.. Easy To UseSwivel mount for easy installation, removal and location adjustment.It can soothe those sounds that make your voice sound harsh and overly excited.1-year warranty. Please contact us promptly if you encounter any questions during use..

Rugged and Stable Design - With its tripod design on the base, the center of gravity drops in use, it can be very stable on the table and will not easily roll over, even under the action of external force. Its adjustable nature means that you can position the stand in a variety of positions.. Suitable for dynamic microphone - Microphone clip with anti-slip and fixed function for all handheld microphone, compatible with ATR2100-USB, AT2005-USB, Q2U, Xm8500, SM58, PGA48PGA58 and other dynamic microphones.. Easy to use - The package includes two parts, Microphone Tripod and Clip Holder. Internal thread of the microphone clip and standard 38 to 58 adapter which is attached to the mic clip so it easily screws on.With the screw adapter, this mic stand is also compatible with Yeti, Snowball, SM7B, MV7, PodMic.. Convenient to carry - This is a versatile professional mic stand for desktop application, suitable for singing, screencasts, studio, podcasts, video chats, meetings, lectures, broadcasts, live interviews and other, which is suitable to be carried anywhere.. Note - Make sure one of the three legs is to the front of the mic, otherwise it will topple. Also, it supports a maximum weight of 6.6 lbs, balance a stable microphone placement..

Quick Hassle-Free Setup The telescopic mic stand features a simple screw-on designjust attach the telescopic pole to the weighted base, mount your microphone using the included 38 to 58 screw adapter or mic clip, and then secure the lock washer for angle adjustment. No complicated assembly is required, making it ideal for both beginners and professionals who need a ready-to-use stand in seconds.. Adjustable Height for Universal Comfort With a wide height range 22.55 to 68.23, this microphone stand floor accommodates users of all ages and setupswhether you're sitting or standing. The one-hand pull-press operation allows for smooth, tool-free adjustments, making the boom mic stand perfect for podcasters, streamers, singers, and voice-over artists who need quick positioning changes.. Ultra-Stable Weighted Base The 4.98 lbs heavy-duty base keeps the studio mic stand firmly planted, even with heavier microphones like the Shure SM7B or Blue Yeti. This reduces vibrations, minimizes accidental knocks, and ensures steady performance during long recording sessions, live streams, or performances.. Broad Compatibility with Mics This upgraded floor microphone stand is compatible with Fifine K669B, Blue Snowball iCE, Blue Yeti, Audio-Technica AT2020, Audio-Technica AT2035, Samson Q2U, Razer Seiren X, Shure SM58, Shure PGA48, Shure SM7B and so on. Whether you use a USB condenser mic, dynamic mic, or broadcast mic, the included adapter and clip provide a secure fit for almost any model.. Durable Portable The telescopic design allows for compact storage and easy transport, making the podcast microphone stand great for home studios, podcasting setups, live gigs, or on-the-go recordings. The lock washer ensures your mic stays securely in place at the desired angle, while the sturdy construction ensures long-lasting reliability..

Stable Metal Base - The desktop mic stand has a heavy-duty weighted metal base with non-slip sponge pad for maximum stability and prevent scratches on the tabletop. Also eliminates noise when moving to ensure recording quality.. Height Adjustable - The extension rod of the desk mic stand allows you to adjust the height 6.3in9.5in to fit any desk setup or recording posture. The microphone stand allows you to sit comfortably and record for a long time.. Dual Noise Solution - The shock mount of high-elastic suspension ropes space your mic from bumps and desk vibrations. Shock mount NOT compatible with Blue Yeti mic. And the double-layer pop filter eliminates plosives BP sounds and hissing.. Universal Compatibility - The microphone stand desk works with most popular mics like AT2020, Blue Yeti, Snowball, HyperX QuadCast, Shure SM58, SM7B and also suitable for any other 1.57 in to 2.04 in diameter microphones.. All-In-One - Includes adjustable desk mic stand, shock mount, dual-layer pop filter, mic clip, and the 38 to 58 adapter. Tame messy cables, fit any mic model, perfect for beginners and pros alike..

Sturdy Metal The all metal microphone arm stand provides stability and sturdy protection for your podcast microphone whether you're gaming, podcasting, recording or streaming. The microphone is not included. Low Profile The arm stand for gaming can extend from the bottom of your computer screen. The podcast mic stand saves more space in a unobstructing view while in an intense game.. Cable Management The low profile microphone boom stand is equipped with cable managements in hiddenness to organize your microphone cables. Neat arrangement of cable will not cause excessive pulling or resulting in unexpected use, keeping your streaming setup cleaner.. Fully Adjustment Suspension arm stand recording can be extended to 29 inches, suitable for your long large office desktop. The boom arm for microphone can be adjusted up to down by 220 degrees, and horizontally by 360 degrees. More angle adjustments provide more usage options. TipsThe section which near the C-clamp can not be adjusted up to down.. Screw Adapter Coming with three kinds of threads size, 14, 38, 58, the microphone boom arm solves the hassle of choosing additional adapters. You can easily and quickly install and use microphones, shock mounts, cameras, etc with the mic stand in gaming, vocal recording, video creation.. TIPS 1 The desk clamp is suitable for desktop with a thickness of 0.8 to 2.4in. 2 The microphone is not included. 3 The package including, boom arm stand1, desk clamp1, rotatable ball-head1, allen wrench1, users manual1. 4 Two adapters 14'' to 38'' adapter and 38'' to 58'' adapter are already connected on the rotatable ball-head..

Ultra-Low 5 Inch Height Adjustment The short mic stand is adjustable from 5 Inch to 7.6 Inch 12.7 - 19.3cm, making it ideal for taller microphones or mics with built-in stand. Position your mic right at mouth level for comfortable, natural recording while seated.. 6.6lbs Load Capacity Supports microphones up to 6.6lbs, handling heavy studio mics with confidence. Even with a pop filter or windscreen attached, the table mic stand remains steady without sagging.. Self-Weighted Anti-Tip Base The solid 900g weighted base provides built-in stability, no extra counterweights needed. Four eco-friendly non-slip pads help prevent sliding and protect your desk surface.. All-Metal Construction Crafted entirely from metal, including the base, telescopic pole, and adjustment knob, for a premium feel and long-lasting durability. Perfect for professional recording, podcasting, interviews, and streaming setups.. Universal Mic Compatibility, Especially Heavy Mics This desk mic stand is compatible with a wide range of popular microphones, including Shure SM7B, SM7dB, MV7, MV7, MV7X, RODE PodMic, AT2020, AT2035, FIFINE AM8, K669B, HyperX QuadCast, SoloCast, Snowball iCE, Elgato Wave, Blue Yeti, and more. Equipped with sturdy 14, 38 and 58 adapters for a tight, wobble-free connection, this mic boom arm connects seamlessly to most mic mounts.. Whats in the Box Weighted base, telescopic pole, 38 to 58 adapter, 38 to 14 adapter, and cable clip.. Worry-Free After-Sales Support If any accessories are missing or you encounter any issues, were here to help. Simply go to Your Orders Order Details Contact Seller or Get help with order and well take care of it promptly..

Adjustable Height Solid The height of the microphone stand is adjustable from 28.1 inches to 66.1 inches by adjusting the knob, perfect for people in all age groups. It features upgraded supporting structures for better load-bearing capacity, holding your microphone in position.. Steady Tripod Stand The high-quality thickened steel poles enhance the exceptional stability and durability of this mic stand. Compared to other lighter stands that are easy to tip over, our mic tripod stand is as heavy as 4.0lbs, serving indoor and outdoor use.. Flexible Detachable Boom Arm The boom arm of the stand is adjustable from 16 inches to 30 inches in length and it can rotate 360 horizontally as well as up to 180 vertically. You can choose the best angle and length of performance by easily adjusting the knobs on the boom arm. Remove the boom arm and attach the mic clip, then you can also use it as a straight mic stand.. Portable Carrying Bag The package comes with a premium carrying bag and the floor mic tripod stand is easy to disassemble into several pieces which allows it to easily pack into the small carrying bag 19.58.3 and fit anywhere, easy to transport and store.. Wide Compatibility Two different styles of mic clips in package are compatible with most types of microphones such as Shure SM58, Shure SM48, Shure PGA48, Samson Q2U, ATR2100x-USB, etc. The included metal 38 to 58 screw adapter is suitable for Blue Yeti, Snowball, Hyper X QuadCast, SoloCast, Shure SM7B, AT2020, Fifine AM8 and more..

Boom Arm - Suspension boom arm stand fit your Blue Yeti, HyperX QuadCast suitable, you can adjust the mic to the suitable angle or height to show your voice.Before installing your hyperx microphone to the microphone arm, you can loosen the knob and adjust it to the angle you want to tighten after installing your gaming mic.. Stability - Mic boom arm is dual suspension springs on each boom arm, the knobs are reinforced to keep the mic arm where you want it to be,protects the HyperX QuadCast S microphone from shaking, sinking and making noise.. Mic stand - Before you receive this mic stand for hyperx quadcast, we pre-install the silver adapter for hyperx quadcast boom arm. Mic arm adapter can be converted from 38to 58for adapting HyperX QuadCast.. Table Clamp Base - Suspension boom arm comes with one desk clamp, can clip to any desktop up to 1.894.8cm thick. The sponge on the mic stand desk base could protect your desk without any scratches when you swivel side screw.. Package - Included 1x HyperX QuadCast Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter 38 to 58 match most microphones and shock mountPre-installation completed. Note Not Included Streaming Mic.. Adaptability- This Mic Arm is also compatible with various models of microphones, For exampleHyperX QuadCast, Blue Yeti, Blue Snowball, HyperX solocast, Shure MV7, Shure SM7B, Fifine K688, Fifine AM8, Rode, Razer Mini, etc..

Rock-Solid Stability with Freely Movable BaseEngineered from premium metal, this mount features a freely movable weighted base that adapts to any desktop surface. Unlike fixed clamps, it provides exceptional stability without damaging your desk, while supporting up to 2.2LB 1kg. Move it effortlessly to your perfect spot and trust that it will stay firmly planted during intense recording sessions.. Innovative Hollow-Arm Design for Tangle-Free CablesKeep your workspace sleek and organized The unique hollow-out design in the central arm acts as a built-in cable organizer. You can neatly wrap excess microphone cable through the arm itself, eliminating messy wires on your desk and giving your studio a clean, professional look.. Wide CompatibilityDesigned for seamless integration, this mount features a standard 38-inch screw thread. It comes with a 38 to 58 adapter, making it universally compatible with most microphones, shock mounts, and boom arms on the market. No matter what gear you use, this stand has you covered.. 360 Adjustable Arms for Optimal Mic PositioningAchieve your perfect sound with total flexibility. The multi-axis adjustable arms allow you to easily tilt, swivel, and rotate your microphone to any angle. Whether youre podcasting, singing, or on a Zoom call, you can position the mic exactly where you need it for the best vocal capture.. Versatile for Any Workspace 1-Year ServiceThis mount is designed to fit any working environment, from home studios and office desks to gaming setups. Its adaptable base works perfectly on uneven surfaces where traditional stands fail. Plus, we back our quality with a 1-Year After-Sales Service guaranteeyour satisfaction is our priority..

Stable Base Sturdy Boom ArmCompared to other tripods, the weighted square base of the microphone stand weighs 6.6 pounds, which is more stable and has a larger load-bearing capacity.Sturdy boom arm with extra strong springs provide extra support, prevents the microphone from accidental dropping, and effectively reduce noises and vibrations.. Height AdjustableThe height of this microphone floor stand is adjustable from 26.7 inches to 67.7 inches, easy to move without taking up desktop space.The perfect floor use mic stand for games, recording rooms, guitar playing, piano singing, live broadcasts, podcast etc.. Applicability This mic boom arm set includes 38to 58 Screw, 38 to 14 Screw, and Mic Clip adapter to suit most microphones. The mic stand can work perfectly with Blue Yeti, Blue Yeti Nano, Blue Snowball, SM7B MV7, Razer Seiren mini and most other microphones.. Double Pop Filter 360 angle rotatable through adjustment knobs which allows for easy positioning. Double screen pop filter effectively blocks air blasts and banishes the dreaded hissing and lisping sounds to achieve perfect sound quality.. Complete Microphone Stand KitPackage includes everything needed for studio recording or broadcasting, 1x metal base, 3x support rods, 1x folding arm, 1x mic clip, 1x pop filter, 2x metal screws38 to 58 and 38 to14, 5x cable ties and 1x Product Manual. The microphone arm can be folded for easy carrying and storage..

Adjustable and Sturdy Mic StandHyperx Quadcast S microphone suspension boom scissor arm stand is made of high quality steel which is more durable and anti-rust .This adjustable black scissor mic stand for hyperx quadcast enables to adjust the suitable angle and height to show your perfect voice.. Perfect Boom Arm- Suspension boom arm stand is Suitable for your Hyperx Quadcast,Blue Yeti Microphones to keep from shaking, sinking and making noise.. Suitable for HyperX MicrophonesThis microphone arm includes one 38 to 58 screw adapter, which is line with industry standards and works greatly with HyperX QuadCast, Blue Yeti, Blue Snowball, HyperX solocast, Shure MV7, Shure SM7B, Fifine K688, Fifine AM8, Rode, Razer Mini, etc.. Versatility - The microphone Boom Arm is equipped with an elastic clip which can hold your cell phone and can allow 270 of forwardbackward tilt, 180 of side-to-side movement, and full 360 rotation for optimal positioning.. Package- Included 1 x Hyperx Quadcast mic arm stand ,1x Screw adapter 38 to 58 match most microphones and shock mount. Note NOT INCLUDED MICROPHONE.. 100 Satisfaction Guarantee If you have any questions or not satisfied with our boom arm, please feel free to contact us, we will provide the best solution for you. Your satisfaction is our biggest concern.

Heavy Duty Stable BaseThe square rounded corner base weighs 6.6 lbs and its thickness is only 0.2. It is more stable and has a stronger load-bearing capacity. Unlike other tripod, the thin base saves space and reduces tripping.. Adjustable HeightWith a retractable support rod and gooseneck hose design, the microphone stand can be adjusted in height from 36 to 66, suitable for singing, speaking, recording, or live broadcasting on stage.. Adjustment Height for Special ApplicationsThe microphone stand contains 2 fixed length support rods, 1 retractable support rod and 1 gooseneck hose. Fixed length support rods or gooseneck hose can be not installed optionally to reduce height, and the minimum height can be adjusted to 14.5.. Mic ClipsThe floor mic stand set includes standard mic clip and big mic clip. The standard mic clip can work perfectly for Samson Q2U Fifine K6. The big mic clip work perfectly for Samson Q2U Fifine K669B Razer Seiren X AT2020 AT2035 AT2040 and more.. Screw AdapterInclude 38to 58 screw adapter compatible for Fifine AM8 Blue Yeti, Snowball and more. Include 38to 14 screw adapter compatible for Blue Yeti Nano, Razer Seiren mini, Elgato Wave 1 Wave 3 and more..

EXTREME STABILITYThe low profile design of this microphone arm allows for a lower centre of gravity of the mic arm, which dramatically improves stability. It ensures that the microphone position is fixed and unchanged, without shaking or shifting, even during intense handling, providing you with clear, noise-free recordings. Perfect for gaming, podcasting, recording and streaming.. Flexible Height Adjustmentboth arms can rotate 360. The arm with the microphone attached can also swing up and down 180. No matter where your microphone base clips on, you can adjust the microphone to the position you want. Fits all tables less than 7cm thick.. REDUCED VISUAL DISTURBANCEThe low profile shape won't stand out in your work or play area, and the stand arm extends across the bottom of your computer screen. The bottom of the arm also hides and secures your microphone cable. Reduces line-of-sight distractions, allowing you to focus more on your work or entertainment content.. COMPATIBLEThis mic stand desk comes with a 38 to 14 adapter and 38 to 58 adapter.Maximum load capacity is up to 2KG, compatible with most of the microphones or microphone shock mounts on the market. Compatible with most of the microphone or microphone shockmounts on the market. Convenient to carry and store when you go out to participate in activities.. QUALITY ASSURANCEThis low profile mic arm is made of high-quality steel forging, sturdy and durable, and not easy to be deformed or damaged even after long-term use. This product provides one year after-sales service, please feel free to contact us if you have any questions. Microphone is not included in the package.

Ultra-Low Profile Mic Arm - No Screen Blocking Unlike bulky scissor arms or desk stands that crowd your workspace, this low profile mic arm slides neatly under your monitoreliminating screen obstruction during intense gaming, live streaming, or podcast recording. It keeps your setup clean and minimalist, so you can focus on content creation instead of messy gear.. 5LBS Heavy Duty Metal Build - Rock-Solid Stability Crafted from premium metal no flimsy plastic, this mic boom arm supports heavy microphones up to 5LBS fully retracted positionfor best stability when fully extended, please keep your device under 2LBS. Perfect for pro models like Shure SM7B and Blue Yeti that cheaper arms cant handle. The anti-scratch C-clamp fits desks 0.83 inches thick, locking securely without damaging your desktop and staying stable even when fully extended or accidentally bumped. Not suitable for curved desk edges, desk lips, baffles or extra thick countertops.. 360 Tool-Free Adjustment - Instant Positioning Skip the Allen wrenchesthis microphone arm features easy-turn knobs for smooth, tool-free adjustments. Swivel 360, tilt 180, or extend up to 29 inches to find your ideal mic position in seconds. Whether youre sitting, standing, or using a multi-screen setup, it adapts seamlessly to podcasting, gaming, or video call needs.. Universal Compatibility - No Extra Adapters Needed This low profile boom arm comes with 38 to 14 and 38 to 58 screw adapters, working seamlessly with top microphones Shure SM7BMV7, Rode PodMic, HyperX QuadCast, etc. as well as webcams and ring lights. Save money on extra partseverything you need is included for a hassle-free setup.. Built-In Cable Management - Tangle-Free Setup Keep your desk tidy with integrated cable slots and snap-on clips on this mic arm. Hide messy mic cables to avoid tangles, accidental tugs mid-recording, and unsightly wires in your stream. Its the simple upgrade that makes your workspace look professional and organized..

Professional Microphone Arm - Universal professional microphone scissors arm stand with 38 to 58 adapter. The personalized microphone arm can be used to replace most different models of blue yeti boom arm. No sagging, just rock solid. This is a sturdy, elegant is a very high quality boom arm. Note Does not fit the Blue Yeti Nano.. Stability - This microphone boom arm can support microphone weights of up to 1.4kg3 lbs. Heavy duty boom mic stand with strong springs for stability and durability. The desktop clamp made of metal, it fits fully to the table. In addition, the mic boom arm are perfectly nested in the clamp for even forces, increasing the stand's stability and durability.. Flexibility - Mic boom stand can be rotated 360 degrees around the table clamp, or the arms can be locked and fixed in any position and angle you want. Desktop boom microphone stand has three adjustable circular knobs that control the first arm - 120, the second arm - 180 and the microphone - 200 rotation angle, which can be adjusted at will. Very flexible and easy to use, suitable for installation in a variety of scenarios.. Concealability - The mic arm both arms are designed with recessed channels to conceal the microphone cable within the recessed channels and each arm has three clasps to hold the cable in place, making it both compact and aesthetically pleasing. Say goodbye to messy cable runs.. Package Include - 1 x blue yeti boom arm, 1 x blue yeti pop filter. NOT INCLUDE MICROPHONE. Great for recording, singing, video calling, zoom meetings, training video production, online teaching, podcasting, gaming and live streaming..

COMES IN PAIR Pyle introduces two universal microphone stands in a glossy black finish. An ideal floor microphone stand for the musician thats always on the go. Perfect microphone holder positioning and optimal pickup for studio microphone stand use and concert performances.. HEIGHT ADJUSTABLE Allows you to adjust height from 2.8 to 5 feet. The heavy compact stand for microphone adjusts smoothly, with raiselower height adjustments depending on the user's height. Also features universal USA standard -inch screw-on threading for compatibility.. METAL STAND BASE The floorstanding stand microphone features a compact metal base that provides maximum stability and balance to prevent it from falling. The enlarged tubing is carefully designed for durability and structural support, ideal for studio or stage setups.. SLEEK BLACK FINISH An ideal microphone stand for singing, made ultra-light for easy transport. Features a sleek black finish perfect for studio microphone stands and concert performances. Its compact build ensures durability for long-term use.. STEEL CONSTRUCTION Made of strong lightweight steel construction, ensuring maximum support for mics. This mic stand is perfect for both studio and floor microphone stands, especially for concert performances. Includes 2 adjustable mount arms, 2 mic clips, and 2 stand bases..

Adjustable Height Solid The height of the microphone stand is adjustable from 42.1 inches to 68.5 inches by adjusting the knob, perfect for people in all age groups. It features upgraded supporting structures for better load-bearing capacity, holding your microphone in position.. Steady Tripod Stand The high-quality thickened steel poles enhance the exceptional stability and durability of this mic stand. Compared to other lighter stands that are easy to tip over, our mic tripod stand is as heavy as 4.0lbs, serving indoor and outdoor use.. Flexible Detachable Boom Arm The boom arm of the stand is adjustable from 16 inches to 30 inches in length and it can rotate 360 horizontally as well as up to 180 vertically. You can choose the best angle and length of performance by easily adjusting the knobs on the boom arm. Remove the boom arm and attach the mic clip, then you can also use it as a straight mic stand.. Portable Carrying Bag The package comes with a premium carrying bag and the floor mic tripod stand is easy to disassemble into several pieces which allows it to easily pack into the small carrying bag and fit anywhere, easy to transport and store.. Wide Compatibility Two different styles of mic clips in package are compatible with most types of microphones such as Shure SM58, Shure SM48, Shure PGA48, Samson Q2U, ATR2100x-USB, etc. The included metal 38 to 58 screw adapter is suitable for Blue Yeti, Snowball, Hyper X QuadCast, SoloCast, Shure SM7B, AT2020, Fifine AM8 and more..

All-in-one combooProfessional Recording Studio Equipment with adjustable desk microphone stand, Adjustable Shock Mount, double layer Pop Filter , Screw adapter, Microphone clip. All the items of the package can meet your need for live streaming, broadcast, audio recording and more. Rock SolidBILIONE Mic Stand Desktop made a new upgrade to Weighted Base and Metal Rod. The new version all-metal base weighs 1.5lbs, measures 5.1inches 13cm in diameter, and has 3 anti-slip pads on the bottom to avoid noise when movingYou can also remove pads to keep the base from shaking easily when using heavier microphones.. As well We thickened the diameter of the metal rod to 0.74inches to easily support heavy microphones without falling over.. Two-Screen POP FiltersThe first screen blocks air blasts as any pop filter normally would The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Banish the dreaded hissing and lisping sounds that come when pronouncing the letter S and blocks those scary plosives that follows B and P. Excellent Shock Mount EffectPlease noted the shock mount is not fit for Blue Yeti. It can protect your microphone all-around with high elasticity wrap roping desigh and reduce vibrations from traveling into the microphone. Suitable for mikes with a diameter of more than 1.774.5 cm, and Max diameter2.055.2 cm. Strong Compatibility and ApplicabilityPackage includes 38 to 58 adapter, making it compatible with many microphones like Blue Yeti, AT2020, Fifine AM8, AT2035, QuadCast, Sm58, Seiren X etc. Adjustable shock mount and universal mic clip also provide more possibilities.

2026 Upgraded Precision Mold 100 Compatible Fit Guaranteed Engineered to hug every contour of your Blue Yeti like a glove, eliminating gaps and wobbles for broadcast-ready stability.. Improved Sound Quality and Reduced NoiseMic Windscreen Foam Cover with Shock Mount , Mount Made from Quality Materials MetalPlastic to Eliminate Vibrations -Acoustic Foam Act as a Pop Filter for your Mic.- Filter out those harsh p and t sounds.. This Custom Built Shock Mounts features a new streamlined, Designed for Blue Yeti Mic, robust protection against lateral impact , lightweight design made for live streaming and recordings. Elevate your audio recordings with Yeti mic custom shock mount to shield your microphone from background noise, improving the sound quality of podcasts, Twitch streaming, voiceovers and broadcasts. Universally compatible with mic boom arm standsThis custom shock mount has a 58-inch interface with 1 38-inch screw and is compatible with most cantilever mounts boom arms and tabletop mounts on the market.. Mic Angle Adjustable This microphone shock mount is designed with a knob that allows you to adjust the angle of the microphone up to 180 degrees at will to achieve ideal recording results.. Premium ServiceWe offer 2 years replacement service and lifetime parts replenishment..

Articulating Arm Microphone stand have 3-stage arms,the top arm is zinc alloy material, length is 2.76 inch 7cm, the other 2-stage arms are aluminum alloy material made,each arm length is 7.87 inch 20 cm,sturdy and durable design construct mount to hold microphone device stable,allowing to load capacity of weight is 3.3 lbs 1.5 kg at most,great for heavy-duty microphone devices.. Metal BaseMetal meterial construct,baking paint surface and comfortable hand feeling,sturdy and durable,anti-rust and anti-corrosion.back of base built-in EVA foam pad to prevent desktop from anti-scratches,one L sharped groove for save hexagonal wrench,the base length is 6.22 inch 15.8 cm,witdh is 5.43 inch 13.8 cm,thickness is 0.236 inch 0.6 cm,arm and base have been fixed,its no necessary for user to install arm and base by manual.. Flexible AdjustableTwisting the joint knob of top arm,the ball head can 360ratation,38-16 threaded screw can 180 tilt, we provide a stainless steel hexagonal wrench,customer can adjust hexagonal nut on the arm with wrench,arm between and arm can 180 rotation, arm between and base can 180 rotation, the whole arms can fold together,one buttton on mic clip for adjusting 180 tilt.. Universal Mic Clip Microphone clip are ABS and spring materials,maximum opening jaw is 2.36 inch 6 cm,clip is equipped with anti-slip rubber pads to prevent the microphone from slipping,with a strong elastic force hold microphone firmly,fits most of univseral microphones,such asShure SM48 SM57 SM58 SM137 PGA48 PGA58 Beta 58A Beta 87A ,AT2020 USB AT2035 AT2020 AT2005-USB ATR2100-USB Fifine K6 Shinco Pyle Xm8500.. Screw AdapterAluminum alloy 38-16 to 58-27 screw adapter for these microphones Fifine AM8 Fifine K688 Fifine XLRUSB,Blue Yeti Blue Yeti Pro Blue Snowball,HyperX QuadCast HyperX SoloCast,Shure M7B ShureMV7 Shure MV7X Shure SM,Razer Seiren V2 V3 X X USB,Rode PodMic etc. Aluminum 38-16 to 14-20 screw adapter for webcam C920 C920S C920x C922 C922x C925e C930 C930e,DSLR camera,Ring Light,with a standard 14-20.screw hole device..

Premium ConstructionBuilt with a 25mm reinforced steel rod 66 Thicker Than 15 mm Standard arms to securely hold heavy mics like Shure SM7B or broadcasting setups. No wobbling, bending, or deformation even during intense performances. Versatile Height Angle ControlAdjust from 22 desktop recording to 67 standing vocals in seconds with a smooth-turning knob and detachable rods. The 180 rotating mic clamp ensures perfect positioning for crystal-clear sound capture, whether streaming, podcasting, or live stages. 5.2LB Anti-Slip BaseA weighted 11 wide base 5.2lbs grips surfaces firmly, the smooth-edged design with EVA padding stays discreet underfoot. Ideal for cramped stages, home studios, or live streams where space is tight. Universal CompatibilityFits 99 of Mics Accessories Includes 2 standard Mic clips and a 38 to 58 adapter for Blue YetiProSnowball, HyperX QuadCastSoloCast, AT2020, Razer Seiren X, Shure SM7B, etc. No matter what kind of microphone you have, this stand has you covered. Detachable Portable DesignYou can break down into 3 lightweight rods in 20 seconds. Reconfigure heights for stage shows, outdoor events, or tight studio spaces securely packs in a custom-designed box with foam inserts to prevent scratchesdents during transport..

UPGRADED DESK CLAMP of MIC STAND- In comparison to other versions, this metal desk clamp is built with anti-scratch pad and wider mouth up to 2 to fit most desktop. It also has a fixed knob, so the swing arm does not move freely after the knob is locked.. ANGLE ADJUSTMENT-The suspension boom arm stand provides 180 up and down rotation adjustment. The mic arm stand gives a wide extension and provides your mic with full range of motion. Attaching your mic to the arm stand adapter included will allow you to place the mic closer to your mouth which will result in a richer, fuller tone to your voice.. STURDY METAL MATERIAL-Made of sturdy metal, the mic arm stand is attached with strong and elastic springs to upgrade the stability and durability of the suspension arm stand. When you unintentionally hit the desk while adjusting the arm or playing games, the stand will not shake strongly. The boom arm gives you more stable whether adjusting position, angle of arm stand or carrying and moving microphone.. FOLDABLE AND PORTABLE-The arm stand can be folded to save more desktop space. You can also take the mic stand out for recording anytime, which suitable for people who own less desktop space. You can also put it in your bag and carry the boom arm to somewhere you want to record or podcast.. WIDE COMPATIBILITY-Coming with 58'' to 38'' metal adapter, the extendable boom arm is compatible with many microphones, such as the Fifine K669B, K670, K683A, K658, K688, AmpliGame A6V, A8, AM8 usb microphones. Mics are not included. The mic stand is greatly suitable for gaming, streaming, podcasting or more scenes, and also friendly to recording beginner.. Tips 1 The desk clamp is suitable for desktop with a thickness of 2or less. 2 The microphone is not included..

Mic Stand With Isolation shieldFeatures foldable microphone isolation shield with acoustic sandwich design - sound-reflective layer, precision filter layer, and absorption layer. High-density acoustic foam effectively eliminates audio wave reflections and interference. Dual noise-blocking zones reduce 87 ambient noise. Isolation ShieldFront panel constructed with studio-grade acoustic foam, backed by ultra-lightweight ABS plastic. Combines exceptional noise isolation 26dB reduction with rugged durability. Functions as desktop recording screen or mic stand with isolation shield - perfect for standing performances and seated studio sessions.. Microphone Isolation ShieldIncludes industrial-strength steel clamp with secure screw-locking mechanism. 72.8 professional mic stand with isolation shield offers 42-71.5 height adjustment range. Patented quick-release adapters enable seamless positioning for any recording scenario.. Weighted triple-leg base eliminates tipping risks during intense sessions. Dual mounting options desktop configuration or boom arm attachment. Meets broadcast studio standards for voiceover booths, podcast setups, and live streaming stations.. Package includesMicrophone isolation shield foldable 17.1 diameter,2x universal thread adapters fits 38-58 mic stands,Illustrated setup guideNote Microphone not included.

STABLE TRIANGLE GRAVITY DESIGN With its tripod design that the center of gravity dropping in use, JCWINY Mic Stand Desk provides more stability and precise balance to keep microphone from topple-over even under the action of external force.. ADJUSTABLE HEIGHT The microphone stand desk is designed with two adjustable height levels. The height can be extended from 11.5 to 17 inches meeting most height needed on desktop, allowing you to sit comfortably and conveniently to record for a long time.. WIDE COMPATIBILITY With a 14 to 58 adapter, the desk mic stand is compatible with Blue Yeti, Yeti Pro, Snowball, for HyperX QuadCast, SoloCast, Fifine, AT2020, for Razer Seiren X, and other microphones. The package also comes with a mic clip with a max diameter of 1.2, compatible with dynamic microphones such as for Shure SM58, SM48, PGA48, for Samson Q2U, and etc.. PORTABLE AND fOLDABLE Weighing in at just 260g0.57lb, the small mic stand for desk is portable and foldable, and convenient for you to move it anywhere you want Also easy to pack for travel without occupying much space. A versatile professional table mic stand, suitable for singing, screencasts, studio, podcasts, video chats, meetings, lectures, broadcasts, live interviews and others.. EASY TO USE The desktop microphone stand is easy to mount and use with no tools required. The maximum load of this microphone desk stand is 1.5 kg3.2lb. Make sure one of the three legs is to the front of the mic, otherwise it will topple..

Low-Profile Mic Arm Stand Transform your workspace with the InnoGear low-profile boom arm, expertly crafted to blend seamlessly into your setup. With a sleek and minimalist design, the arm extends just 3.27 inches from the desk to the top of the lower arm, tucking neatly beneath your monitor for an unobstructed view. Say goodbye to clutter and hello to a clean, modern, and professional environment that enhances your productivity and focus.. Unmatched Flexibility Experience exceptional versatility with the fully adjustable InnoGear mic arm. Boasting an impressive horizontal reach of 26.1 inches and complete 360 horizontal rotation, this stand allows for smooth and precise positioning. The vertical adjustment of 270 at the arm joints and 250 at the microphone attachment joint offers full control, ensuring optimal mic placement for any recording or streaming setup.. Superior Durability Constructed from high-grade alloy steel, the InnoGear boom arm stand is engineered for long-lasting strength and dependability. Capable of supporting microphones up to 1.5 kg 3.3 lbs, it ensures a secure, stable connection. Assembly is quick and straightforwardsimply insert the arm into the table mount and tighten the shafts for a rock-solid setup that will last through countless sessions.. Reliable C-Style Clamp Our robust alloy C-style clamp ensures superior stability, securely holding your mic and desk setup in place. The wide contact area, coupled with rubber padding, protects your desk from marks or scratches while delivering a noise-free, smooth operation. Compatible with desks up to 2.75 inches thick, the clamp also features a convenient headphone hook, adding versatility and extra functionality to your workspace.. Broad Microphone Compatibility Designed to support a variety of microphones, the InnoGear boom arm is compatible with HyperX QuadCast, SoloCast, Fifine K669B AM8, Blue Yeti, AT2020, and more. The included 38 to 58 screw adapter and universal mic clip ensure seamless compatibility with almost any mic, making it the ideal choice for both professionals and beginners..

Steady Tripod BaseCompared to other tripods, the tripod legs of this tripod mic boom extends further which can stand and hold microphone securely in the appropriate position. The high-quality thickened steel poles enhance the stability and durability of this tripod mic stand.. Adjustable HeightBecause of the retractable desig, the height of the microphone stand can be adjusted from 94cm to 149cm, which is the perfect mic floor stand for stage performance, speeches, meeting rooms, party, wedding, karaoke sing or live broadcasts etc.. Straight Mic Stand Detachable Boom ArmSimply remove the boom arm and attach mic clip, then you can also use it as a straight mic stand. The boom arm of the stand extends freely within 35cm to 60cm in length, and it can rotate 360 degrees horizontally and 180 degrees vertically.. Wide CompatibilityThis tripod mic floor stand set includes 38to 58 screw adapter, and 2 mic clips adapter to suit most microphones. The mic stand can work perfectly with Q2U K6 AM8, Blue Yeti, Blue Snowball, MV7 SM7B and most other microphones.. Complete Microphone Stand KitPackage includes everything needed for studio recording or broadcasting, 1x tripod base, 1x extendable support rode, 1x extendable boom arm, 2x mic clips, 1x metal screw adapter38 to 58, 5x cable ties, and 1xcarrying bag, 1x product manual. The microphone stand can be extended and retracted for easy carrying and storage..

100 Fits Blue YetiThis microphone shock mount is precision-engineered for Blue Yeti. The blue yeti shock mounts inner groove curvature and screw holes perfectly match the blue yeti microphone for zero-gap installation. Compared to universal mounts, it reduces mic sway by 85, eliminating mechanical noise from loose fittings.. 70 Cut in Post EditingThe hybrid metal-plastic frame combines with elastic suspension bands to dampen vibrations from all angles. The elastic suspension system isolates the mic from desk vibrations, floor tapping, and equipment resonance, keeping raw audio clean and reducing post adjustment time.. Fits most Boom Arm Mic StandsThis shock mount for blue yeti equipped with 38 to 58 adapter 58 Interface No extra adapters needed fits seamlessly with most blue yeti boom arm standscantilever stands and desktop blue yeti mic stands.. Pro Filter, 80 pb Noise OutPremium quality acoustic foam pop Filter eliminates most of pb noise interference, for crystal-clear audio in podcasts, gaming streams, live streams and recordings. Support 45 tilt360 swivel adjustment, quickly find the perfect voice pickup angle.. Quality Service24-month replacement service and lifetime parts replenishment..

Adjustable HeightThe mic stand desk height can be adjusted from 10 inches to 14 inches. Meet the requirements of desktop microphone use. Allow you to adjust the height to suit your needs. The base with rubber pads, which is non-slip and protects the table top from damage, reducing the transfer of vibrations from the desk to the microphone.. High Quality MaterialThe microphone stand base and stand tube are made of stainless steel material, mic clip and height adjust knob are plastic. Comparing with plastic microphone stands on the market, obviously ours is more reliable and longer in use. Stable Metal Base The desk mic stand metal base is 5.12 inches in diameter and weighs 0.77 pounds. Large contact area with the desktop, its own weight, not easy to touch down, can well protect the microphone safety.. Easy to carryThe microphone stand desktop whole consists of three parts the base, the stand pole, plastic height adjuster and plastic mic clip. Lightweight, collapsible mic stands that are easy to transport, take up little space, ideal for carrying around, you can take out and use anytime and anywhere. Wide ApplicationThis desk mic stand is suitable for Snowball, Blue Yeti, and many other microphones. Perfect for podcast,live streaming, recording, lecture and so on.

Sturdy Mic Boom Arm Built with durability in mind, this mic stand is made from heavy-duty metal, which can withstand weight capacity of within 2kg. Reduce slight vibration of the microphone, and obtain clearer recording sound quality.. Fully Adjustment This podcast mic boom arm provides you with flexibility in positioning your mic. Horizontally rotatable 360 base of the mic arm stand accommodate your recording needs with ease. Whether you prefer a low, mid, or high placement, this stand allows for complete adjustment.. Hidden Cable Channel This recording microphone arm stand features a hidden cable management channel, allowing you to neatly organize and conceal your microphone cables. Say goodbye to tangled cords and improve the aesthetics of your recording setup.. Easy Installation Designed for convenience, this heavy duty mic stand comes with desk mount clamp, which provides secure attachment to your desktop and allows for easy installation onto your table. Simply clip the c-clamp onto the table and insert the recording mic arm stand, greatly saving operation time and steps.. Versatile Compatibility Accommodate different podcast or gaming microphone types and sizes with 14, 38 or 58 threads, this recording boom arm is compatible with a wide range of microphones and makes you with the flexibility to work with your preferred equipment..

Professional Mic StandSturdy boom arm with extra strong springs provide extra support, prevents the microphone from accidental dropping, and effectively reduce noises and vibrations.. ApplicabilityThis mic boom arm set includes 38to 58 screw, 38 to 14 screw, and mic clip adapter to suit most microphones. The mic stand can work perfectly with Blue Yeti, Blue Yeti Nano, Blue Snowball, and most other microphones.. Upgrade Desk StandCompared to the old versions, this desk stand has a desk mount clip with a rubber anti-scratch pad to prevent the desk from being scratched. An adjustable positioning screw can easily clip to any desktop with a thickness of 2.1.. Double Layer Pop Filter Mic CapThe gooseneck is 360 adjustable in all directions. Double screen pop filter effectively blocks air blasts and banishes the dreaded hissing and lisping sounds to achieve perfect sound quality. The mic cap is thick and soft enough to lower impact forces and protect microphones.. Complete Microphone Stand KitPackage includes everything needed for studio recording or broadcasting, 1 x microphone arm stand, 1 x table clamp, 1 x mic holderclip, 1 x pop filter, 1 x mic cap, 2 x metal screws38to 58 and 38 to 14, 5 x cable ties, and 1 x Product Manual. The microphone arm can be folded for easy carrying and storage..

Sturdy Materialmade of high quality steel and electrostatic powder spraying tech. The stand is more durable and anti-rust compared with normal stands. Super spring support arm bends back and forth at the base, movement is solid and smooth. It doesn't dip or sink. You can move your microphone to any angle you want to fix it.. Multifunctionthe boom arm stand is universal to fit all your needs. If your microphone comes with a different adapter clip just detach the clip and attach your Blue Snowball, Blue Yeti, etc. microphone adapter clips to our stand to hold your personal microphone. It has a threaded screw adapter at the end of the mount.. Newly designed desktop clip it can be attached to any desk up to 2.3in6cm thick and allows your microphone stand to rotate 360.. AOKEO AK-35 microphone arm stand Max Load Approx 70oz 1.8KG,it can attach your Blue Snowball Blue Yeti and fits most of the microphones on the market. Suitable for any stores, Voice-Over ASMR sound studio, YoutubeFacebook Video recording, radio broadcasting, desk, table, TV stations, restaurants, battle station, stage and family performance, etc.. Comes with a 38 to 58 adapter for use with most microphones or microphone shock mounts. You must first install the Elgato Wave on the Shock Mount, and then attach the Elgato Wave and Shock Mount to this mic arm mount..

Unparalleled Stability Strength Engineered with high-carbon steel construction and a 3.3 lb weighted base, this table stand delivers 2.6 lb load capacity 31 above others. Ideal for heavy-duty microphones and equipment. Universal Device Compatibility This desktop mic stand includes dual-thread adapters 14 to 38 and 14 to 58 for seamless integration with professional mics, streaming cameras, and DSLRs. Enables instant switching across gamingstudioconference scenarios. Tri-Axis Precision Positioning Featuring three pivot joints with 360 full-range articulation, this arm stand allows for truly precise positioning of your equipment. The Allen wrench provides single-tool joint locking to eliminate operational drift. Full Protection Base The base's anti-slip EVA pad reduces impact force for premium equipment security and protect your desk from scratches, while providing enhanced stability during use. Compact and Portable Design With a foldable microphone arm and 7.8-inch compact base, this stand delivers ultimate portability for tight workspaces and mobile creators..

Cable Management Channels The upgraded mic arms are optimized with built-in channels as cable management for you to put your cables in by simply removing the rubber cable covers, bringing a clean and neat look without getting your setups and cables tangled while recording or live streaming. The thoughtful design frees the whole look of being a mess and provides a shelter for cables.. Adjustable Angle Smooth Movement The boom arm is fully adjustable in 135 back and forth, and 180 up and down, easy to adjust in multiple directions silently. The base is 360 rotatable. This flexible arm stand allows you to determine which angle is the best for your recording needs.. Upgraded Length Height The length of the arm is increased to 14 inches and the package comes with a 6.3 inches extension riser for extra height. This mic stand has a max reach of 32.3 inches horizontally and 37.4 inches vertically to extend over most monitors. The desk clamp can clip to any desk up to 2 inches thick.. Built-in Springs Strong Stability Made of high-grade thickened steel, this sturdy microphone stand features strong internal springs for reaching a max load-bearing capacity of 3.5 pounds. It can easily handle the weight of heavy microphones like Yeti and SM7B, staying where you put it.. Universal Compatibility The 58 metal connector is compatible with different kinds of microphones like Blue Yeti, Hyper X QuadCast, SoloCast, Blue Snowball, Shure SM7B, Shure MV7, AT2020, AT2020USB, AT2035, ATR2500-USB, ATR2100-USB, Fifine K669B Shock mount not included, Fifine AM8, etc. Perfect for studio, recording, podcasting, streaming, stage..

Upgraded Stable Base The weight of the metal base has been increased to 1.37 lbs and the base diameter is increased to 5.12 inches, having a larger bearing capacity, not easy to tip over. It also features four non-slip pads at the bottom to prevent table scratches and reduce noise when moving the desktop mic stand.. Height Adjustable You can adjust the height of the tabletop microphone stand from 9.8 inches to 14.0 inches to suit your unique needs. Adjust the knob with ease, and position the mic at the perfect height for comfortable and efficient use.. Durable Shock Mount The quality-made shock mount fits for microphones with an outer diameter of 40-52mm, protecting your microphone all-around with high elasticity wrap roping design and reducing vibrations during using the desk mic stand. Please note the shock mount does NOT fit for Blue Yeti.. Free Angle Pop Filter The gooseneck is 360 adjustable in all directions. Freely adjust the angle to create ideal voice, for the dual-layered pop filter effectively blocks air blasts and banishes the annoying hissing and lisping sounds.. Strong Compatibility The included 180 adjustable mic clip is suitable for most dynamic microphones such as Shure SM58, Samson Q2U, Shure PGA48, Shure SM48, etc. The package also comes with a 38 to 58 screw adapter which is compatible with Blue Yeti, Snowball, Hyper X QuadCast, SoloCast, Shure SM7B, AT2020USB and more..

Versatile Height Angle Adjustment Adapt to any performance scenario with ease. The InnoGear mic stand features an adjustable height range from 34 inches to 60 inches, allowing you to customize the mic arm to your exact requirements. The user-friendly clutch ensures swift and precise height settings, while the 180 rotatable mic clip offers effortless angle adjustments. This ensures perfect microphone positioning every time, enhancing your performance with optimal sound capture.. Heavy-duty Stability with Non-slip Base Featuring a robust 4.5 lbs weighted round base with a 9.8-inch diameter, this microphone stand ensures solid and durable usage. The non-slip pads on the base provide extra stability, while a metal gasket between the base and stand prevents any unwanted wiggle, ensuring your microphone remains securely in place during performances.. Enhanced Sturdy Thickened Arm Constructed with a thickened 1.5mm steel arm, significantly more durable than the standard 1mm arms found in other stands, this mic stand is built to hold even the heaviest microphones without deformation. Its superior stability prevents tipping, providing reliable support for your equipment.. Detachable Portable Design This InnoGear boom mic stand can be quickly disassembled into three parts, making it highly portable and easy to set up. This feature is ideal for various settings, including stage performances, studio sessions, road shows, concerts, and outdoor events, offering unmatched convenience and versatility.. Wide Applications This upgraded mic stand fits for most types of microphones like Fifine K669B, Blue Snowball iCE, Blue Yeti, Audio-Technica AT2020, Audio-Technica AT2035, Samson Q2U, Razer Seiren X, Shure SM58, Shure PGA48, Shure SM7B and so on. Whatever your microphone of choice, this stand has you covered..

Heightened DesignThe microphone stand is an heightened mic stand design, rising 7.1 inches from desktop. This design can achieve more space mobility, the up and down movement area is larger, allowing you to optimize settings for excellent audio quality.. Upgrade Desk StandCompared to the old versions, this desk mic stand is made of high-quality steel, and has been thickened and enlarged clamp which can be more securely fixed to the desktop. Two adjustable positioning screws can be easily clamped onto any desktop with a thickness of 2.2 inches.. ApplicabilityThis mic boom arm set includes 38to 58 screw, 38 to 14 screw, and mic clip adapter to suit most microphones. The mic stand can work perfectly for SM7B, MV7, Blue Yeti, Blue Yeti Nano, Blue Snowball, Q2U, K669B and most other condenser or dynamic microphones.. Professional Mic StandThe suspension boom scissor arm mic stand is 360 adjustable in all directions. You can adjust the mic to the suitable angle or height to show your voice. Before installing your microphone to the mic arm, you can loosen the knob and adjust it to the angle you want to tighten. And sturdy boom arm with extra strong springs provide extra support effectively reduce noises and vibration.. Complete Microphone Stand KitPackage includes everything needed for studio recording or broadcasting, 1 x table clamp base, 1 x support rod, 1 x folding arm, 2 x mic holdersclips, 2 x metal screws38to 58 and 38 to 14, 5 x cable ties, and 1 x Product Manual. The microphone arm can be folded for easy carrying and storage..

Multifunction BILIONE desk microphone stand can also be used as a cell phone stand by replacing the clip. The box also contains an additional universal high-quality metal adapter that can be compatible with Blue Yeti Snowball and other microphones, and has multi purposes for the shock mounts. More stable The round base with the weighted base design weighs 1.02 pounds and will not be easily knocked down. Metal tube is stronger than ordinary plastic tube and easily support heavy microphones. Wide application The microphone stand can support many types of microphones such as most Vocal Dynamic Microphones, handheld microphones, and USB microphones. As a mobile phone stand, it supports cell phones with a screen width of 2 to 5, and does not support tablet computers. Suitable for podcast, livestream, recording, conference, lecture, etc. Adjustable Screw in style mic stand adjust height from 8.2 to 12.8 for your need and stay on without sliding down. Desk microphpne stand allows you to sit comfortably and conveniently to record for a long time. Easy to use The microphone desk stand is easy to mount and use. You can switch clips as needed to achieve different functions. Great Value for money.

The package contains Microphone Isolation Shield1, Metal Thread Adapter2 Adapt most microphones,POP Filter1,Storage desk1,Adjustable Stand1 and instruction manual. The height of the isolation shield can be adjusted freely NOTE Microphone is NOT included.. Designed for recording The inside of the microphone cover is made of absorbent cotton material, which maintains the clarity of the human voice and the instrument during recording, eliminating the interference of the audio waves and the external environment.Made of high-quality steel, the Microphone Isolation Shield is more rugged and scratch-resistant.. Easy to install The Microphone Isolation Shield has steel clips on the back. Insert the steel clip into the bracket and tighten the screws.The height of the stand is 187CM, and you can install the isolation shield to any height you want.. Filter the soundThe attached pop filter can help you to Banish the dreamed hissing and lisping sounds that come when promoting the letter S and blocks that ugly plugs that follows B and P And make your voice clear as water. The storage desk can hold the documents and props you need for recording.. Special recording This acoustic shield features an acoustic foam front and a vented metal back plate. If you need to record in the studio, this Microphone Isolation Shield will give you unexpected results.30 days free refund and one year warranty..

Heavy-Duty Studio Mic Stand Engineered with a 1.5mm steel arm and 25mm reinforced rod for maximum stability. This microphone boom stand securely holds heavy broadcasting mics with minimal wobble.. Precise Podcast Mic Stand Adjustment Easily adjust height from 22 to 70 with a smooth clutch knob, individuals over 6 feet tall can also use it. The 180 swivel microphone clip ensures perfect positioning for any recording scenario.. Space-Saving Mic Stand Floor Base The 5.2lb weighted base with EVA pads provides firm grip and floor protection. Its compact square design saves space and prevents tripping hazards.. Universal Microphone Holder System using dual-thread clips and 38-58 adapter, compatible with models like Blue Yeti, HyperX QuadCast, Audio-Technica AT2020, Shure SM7B, and more. Complete with cable management for a tidy studio mic stand setup.. Portable Quick-Detach Mic Stand Breaks down into portable parts in under 20 seconds, ideal for mobile podcast mic stand setups. Includes essential 38 to 58 mic stand adapter for easy transport to any gig..

Perfect solution if you have no space for either a desk mount or a floor mount with a large baseThe flat heavy base makes it easy to fit in a tight space. Built with a heavy-duty 5.5 lbs steel base provides great stability for your microphones. You can also put some extra weight onto the base to enhance stability. Beyond that 106 In Full Coverage Protective Pad resists scratches and wear. Height adjustable we use 2 sections of thickened metal rods adjustable metal rods and extension rods to match the needs of your diverse scenes, simplifying height adjustments The main metal rods are 1inch 25mm in diameter, greatly enhancing stability and durability. Wide Compatibility The standing microphone stand kit includes a 38 to 58 adapter, a big mic holder, and a universal mic clip, Compatible with FIFINE AM8, K669B, HyperX QuadCast S,Solocast, AT2020, Razer Seiren X, Sm58, Samson Q2U and more. Whether for podcasting, live performances, or studio recordings, it adapts to your needs with ease. Convenient and practical This floor mic stand set comes with a small tray, which can keep accessories in place such as phones, capos, small mixers, lyrics sheets, or other small parts, offering convenience and functionality for various applications, whether on stage, during live streaming sessions, concert performances, or practice guitars. Cable Mangement This boom arm floor stand equipped with 4 cable ties and 4 cable clips help to fix the microphone cable or other power cables. Keep it neat and tidy. Avoid clutter.

USBXLR Connectivity-AM8T comes with a dynamic microphone and a boom arm stand. Versatile PC gaming microphone kit with USB compatibility plug and play for PC in streaming or recording, without additional drivers. And also, while in XLR compatibility for mixer or sound card connection, the XLR studio vocal microphone is good at vocal, podcast, or musical instruments creation.. Vibrant RGB Light-The streaming microphone RGB illuminates your gaming setup with customizable RGB lighting for a visually stunning game experience. You can easily control the RGB modecolors or turn off by simply tapping the RGB button without making any complicated settings on specific software.. Enhanced Features-Featured -50dB sensitivity and cardioid polar pattern, the USB recording mic kit not easily pick up background noise for delivering clear audio. The PC gaming microphone USB kit includes a boom arm for easy positioning, mute button and gain knob for precise control, headphones jack for real-time monitoring, and headphone volume control while streaming or recording.. Decent for Gamers and Streamers-The XLR microphone designed specifically to meet the needs of gaming enthusiasts and streamers. Ideal for various applications, including gaming, streaming, podcasting, voiceovers, and more, which also works with popular streaming software like OBS and Streamlabs.. Recording Microphone Kit-The dynamic microphone is more convenient for working from home or going out for podcasts, and the complete accessories allow for faster recording work due to its simple straightforward assembly. External windscreen of the XLR dynamic microphone filter out plosive voice.. Durable Arm Stand - Made of sturdy metal with strong and elastic springs for stability, the arm stand hold the XLRUSB mic in secure support for stable vocal recording. Desk clamp features an anti-scratch pad and fits a desktop thickness up to 2 inch for easy installation usage You can adjust the position and angle of the arm stand for adjustment and movement of the microphone.. Tips 1 The desk clamp is suitable for desktop with a thickness of less than 2 inch. 2 AM8T package comes with dynamic microphone, Boom Arm Stand, C-Clamp, 8.2ft USB to USB-C Cable, User's Manual. 3 XLR cable NOT included..

Free Position Mic Arm This professional microphone stand is fully adjustable in all parts with 360 base rotation for 135 back and forth extension, 180 arm shaft for up-and-down movement, and 270 metal adapter to freely position microphones. It can be easily folded and pushed away for space-saving storage when it stands idle and pull it back for usage.. Prolonged Lifetime Unlike other microphone stands that have a knob on the arm shaft getting in the way and causing spring deformation. InnoGear upgraded mic stand has this problem perfectly resolved with a unique design to prolong the life span of the springs and the stand itself.. Solid Heavy-duty High-quality steel material with super-strong springs and extra positioning hole ensures an excellent load-bearing capacity of 3.3lb1.5kg, compared to others of 2.2lb1.0kg. InnoGear boom stand provides effortless and silent microphone positioning, which is vital in live recording situations.. Desk Edge Compatibility The desk clamp is specifically designed to securely grip squared edges up to 2 inches in thickness please ensure your desk edge is flat and not slanted or curved for optimal functionality.. Microphone Compatibility This microphone arm stand allows diversity and compatibility, for it comes with a standard microphone clip to fit for dynamic microphones like Shure SM58, Samson Q2U, Shure PGA48 and more, and a 58 to 38 adapter for Blue Yeti, Blue Snowball, Blue Snowball iCE, Hyper X QuadCast, SoloCast, Shure SM7B, MV7, Fifine AmpliGame, Fifine K669B Shock mount not included, Fifine AM8, etc..

Microphone Compatibility This microphone arm stand allows diversity and compatibility, for it comes with a standard microphone clip to fit for dynamic microphones like Shure SM58, Samson Q2U, Shure PGA48 and more, and a 58 to 38 adapter for Blue Yeti, Blue Snowball, Blue Snowball iCE, Hyper X QuadCast, SoloCast, Shure SM7B, MV7, Fifine AmpliGame, Fifine K669B Shock mount not included, Fifine AM8, etc..

EXTREME STABILITYThe low profile design of this microphone arm allows for a lower centre of gravity of the mic arm, which dramatically improves stability. It ensures that the microphone position is fixed and unchanged, without shaking or shifting, even during intense handling, providing you with clear, noise-free recordings. Perfect for gaming, podcasting, recording and streaming.. Flexible Height Adjustmentboth arms can rotate 360. The arm with the microphone attached can also swing up and down 180. No matter where your microphone base clips on, you can adjust the microphone to the position you want. Fits all tables less than 7cm thick.. REDUCED VISUAL DISTURBANCEThe low profile shape won't stand out in your work or play area, and the stand arm extends across the bottom of your computer screen. The bottom of the arm also hides and secures your microphone cable. Reduces line-of-sight distractions, allowing you to focus more on your work or entertainment content.. COMPATIBLEThis mic stand desk comes with a 38 to 14 adapter and 38 to 58 adapter.Maximum load capacity is up to 2KG, compatible with most of the microphones or microphone shock mounts on the market. Compatible with most of the microphone or microphone shockmounts on the market. Convenient to carry and store when you go out to participate in activities.. QUALITY ASSURANCEThis low profile mic arm is made of high-quality steel forging, sturdy and durable, and not easy to be deformed or damaged even after long-term use. This product provides one year after-sales service, please feel free to contact us if you have any questions. Microphone is not included in the package.

Heavy-Duty Studio Mic Stand Engineered with a 1.5mm steel arm and 25mm reinforced rod for maximum stability. This microphone boom stand securely holds heavy broadcasting mics with minimal wobble.. Precise Podcast Mic Stand Adjustment Easily adjust height from 45 to 75 with a smooth clutch knob, individuals over 6 feet tall can also use it. The 180 swivel microphone clip ensures perfect positioning for any recording scenario.. Space-Saving Mic Stand Floor Base The 5.2lb weighted base with EVA pads provides firm grip and floor protection. Its compact square design saves space and prevents tripping hazards.. Universal Microphone Holder System using dual-thread clips and 38-58 adapter, compatible with models like Blue Yeti, HyperX QuadCast, Audio-Technica AT2020, Shure SM7B, and more. Complete with cable management for a tidy studio mic stand setup.. Portable Quick-Detach Mic Stand Breaks down into portable parts in under 20 seconds, ideal for mobile podcast mic stand setups. Includes essential 38 to 58 mic stand adapter for easy transport to any gig..

1. Heavy Duty Steel Construction - Sturdy Anti-ShakeMade of high-quality durable steel, this pink mic boom arm features outstanding load-bearing capacity up to 4.4lbs2kg and anti-shake stability. No more wobbly mic stands during live streaming, recording or gamingensures your microphone stays in place for clear sound capture. 2. Upgraded Ultra-Stable Desk ClampIntegrated design desk clamp with 4X larger contact area, fits all desks up to 2.460mm thick. Avoids breaking issues of traditional clamps and protects your desk from scratches while locking tightlyno slipping or falling, perfect for desktopbattle station use. 3. 360 Full Range Adjustable - Flexible Positioning360 rotation 180270 multi-angle adjustment, the metal cantilever can be adjusted to any heightangle you need. Effortlessly position your mic close to your mouth for optimal sound, foldable design for easy storage when not in use. 4. Universal Compatibility - Fits Most MicsComes with standard 38 thread 58 metal adapter, perfectly compatible with Blue Yeti, Snowball Ice, and all mainstream microphones on the market. Built-in shock mount and mic clip holder reduce vibration noise for professional recording quality. 5. Wide Application for All ScenariosIdeal for ASMR recording, YouTubeTikTokFacebook live streaming, voice-over, radio broadcasting, game live, music production, podcasting, family performances and professional sound studios. The unique pink design adds a stylish touch to your setup. 6. All-in-One Complete Accessory KitPackage includes 1Boom Arm, 1Upgraded Desk Clamp, 1Shock Mount, 1Pop Filter, 1Foam Cover, 4Cable Ties, 1Manual. Pop filterfoam cover eliminate plosives and background noise cable ties keep your setup tidyno extra accessories needed.

Unique, Pure, One-of-a-Kind Design Unleash your gaming skills with our meticulously crafted bat wing design white microphone arm. Its sleek and ergonomic design elevates your setup. Dominate the competition with a gaming experience tailored to your needs.. Extra Height 25.5 inch 64.77 cm mic arm provides comfortable use with higher monitors thanks to the 5.9 inch 15 cm length part.. Universal Brand Compatibility Compatible with microphone shock mounts and streaming accessories this microphone arm fits 58 and 38 threading, so you can easily use it for professional recording studios or video game setups at home.. Heavy Duty White Mic Stand This white microphone arm stand features a strong C-clamp that attaches to the edge of your desk without shifting or moving during use. You can also mount it by drilling anywhere on your desk with the grommet attachment. It also lets you fold it away for quick, fuss-free storage when youre on the go.. Adjustable Broadcasting White Mic Arm Designed to help optimize your voice during podcasting, gaming, or streaming this microphone arm works on a desk at home or a podcasting studio with a 360 adjustable arm that rotates to your needs.. Intelligent Stabilization System Move your boom arm wherever you want while recording. It has a stabilization feature that you will not need to change the angleposition of your microphone, camera, phone, tablet, etc. devices again.. Clip-On Cable Management Holder Each white boom mic arm comes with a clip-on cable holder to help free up space and minimize the mess on your desk which creates a clean, professional look that also keeps your space clear of tangled wires.. Strong Dual Suspension Springs Our white desk microphone arm is designed with sturdy suspension springs that support up to 2.2 lb. 1kg of mic weight, so you can keep it from shaking, rattling, or moving during recordings for enhanced clarity..

5 Desktop Stand. Holds Any Standard Microphone. Weighted Metal Base.

Sturdy Durable Base This desktop microphone stand is designed with a heavy weighted powder coated black finish base that features a rubber gasket on the bottom to absorb vibration and provide a precise balance and stability for kick drum and amp mic stand.. Extendable Boom Arm The telescoping boom arm allows you to adjust the length and angle to the perfect angle independently. When the boom arm is extended halfway, the max load is 4.4 lbs2.0 kg. You can easily handle the weight of some microphone like Blue Snowball or Blue Yeti. Note 38 female to 58 male screw adapter is included.. Height Adjustable The height of this InnoGear heavy-duty microphone stand is adjustable from 11'' to 15.8'' inches with a reliable clutch, allowing you to place it at the optimal height for maximum comfort while using.. Flexible Versatile Flexible desktop microphone stand is a versatile configuration for broadcasts, podcasts, live performances which can be used for floor applications such as guitar amplifier cabinets, bass guitar amplifier cabinets, snare or tom bottom, keyboard amplifiers, theater, boundary, and so on.. Compatibility The microphone stand fits for most types of microphones like Fifine K669B, NW-700, Audio-Technica AT2020, Audio-Technica AT2035, Razer Seiren X, Shure SM7B..

All-In-One Combo Package includes all the items you need for studio recording and live sound, a microphone stand, pop filter and 1 Pack microphone windscreen. High Quality foam microphone windscreen Pop filter for filter out the harsh p, t, and b sounds and the sound of wind and other unwanted background noise to improve the quality of your audio recording.. Heavy Duty Construction Mic Stand Super-strong spring protects microphone from shaking, suddenly dropping and making noise. Comes with one table mounting clamp with protective layer of sponge, an adjustable positioning screw, can easily clip to any desktop up to 2 thick.. Double Layered Screen Pop Filters The first screen blocks air blasts as any pop filter normally would The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained to produce great quality recordings.. Universal Compatibility Equipped with clear manual instruction and high quality acoustic foam material, filter out all unwanted background noises. It works perfectly with Blue Yeti, Blue Yeti Pro, Snowball and other microphone..

UNIVERSAL COMPATIBILITY The boom mic arm can attach your Blue Snowball or Blue Yeti along with most microphones Microphone in picture not included.. HEAVY-DUTY ARM Made from Aluminum and steel, this sturdy boom microphone arm and stand can hold most microphones, with a bearing capacity that can hold up to 4.4 lbs.. FULL MOTION ADJUSTABILITY Clamp this articulating microphone arm to any corner of your desk and enjoy nearly 360 of this smooth built-in spring-based balance system, within a compact scissor designed suspension arm.. EASY TO SET UP Whether you're using any microphone condensers, connecting them to this boom arm and clamping it on your studio set up is a breeze. Everything you need from a screw adapter, instructions, and tube style cable management comes inside the box. STABLE AND SAFE Advanced suspension springs on each boom arm prevents your microphone from shaking, suddenly dropping, sinking, dipping, or making noise. The mic boom arm bends and articulates back and forth at the base, making movement smooth and solid. The clamping mechanism won't leave marks or dents, making it safe for use on your desk, shelf, or furniture without the risk of damage..

Heavy-Duty Material Aluminum alloy glass-fiber nylon composite, with 40 25mm ultra-thick reinforced arms. Max Load Capacity 6.6 lbs 3 kg, built for heavy microphones. Extra-Long Reach Extra-long 780 mm reach, extends 40 mm longer than standard mic arms. Locking Mechanism Gear-lock design, more stable and durable than spring-loaded arms, no sagging over time. Cable Management Deep cable channels designed to neatly route multiple cables. Easy Adjustment Tool-free knob adjustments for quick and easy positioning. Rotation Range 360 horizontal 120 vertical adjustment. In the box Desk clamp, top mic boom arm, bottom mic boom arm, 38 to 58 adapter, 38 to 14 adapter, and extension rod. Mic Compatibility Supports Shure SM7B SM7dB MV7 MV7 MV7X, RODE PodMic, AT2020 AT2035, FIFINE AM8 K669B, HyperX QuadCast SoloCast, Snowball iCE, Elgato Wave, Blue Yeti, and other studio mics that typical mic arms cant hold. After-Sales Support Worry-free support, contact us anytime if accessories are missing or if you have any issues. Go to Your Orders Order Details Contact Seller or Get help with order.

Blue Yeti Boom Arm-You don't have your own Blue Mic Boom Arm yet, this large Boom Arm is made of metal, black in color, large enough to stretch anywhere you want, and fits most of the microphones on the market such as Blue Yeti Boom Arm, Hyperx QuadCast, Shure SM7B, Shure MV7, etc.. Stable-Is your Yeti Mic Arm still wobbly The Mic Desk Clamp is large enough to hold the microphone without wobbling. It can withstand the weight of 1.4KG3LB, which is enough to keep your microphone at the same level all the time.. Adjustable Height - An eye-catching height increase, desk microphone arm stand have equipped the extension tube to add 6.3 in height to the Boom Arm, which can make it higher than your monitor or fit more positions No longer so confined to one position. Perfect Adaptability - This mic arm equip itself with 14 thread, carry 38 and 58 adapter, enough to adapt on most of the microphones.. Product Packaging 1x Mic Boom Arm, 1x Desk Mic Stand Base, 1x 38 Adapter, 1x 58 Adapter, 1x Extension Tube..

Universal Compatibility - The Blue yeti mic stand is equipped with a 38'' to 58'' adapter for compatibility with a variety of microphones, including Yeti Mic, HyperX Quadcast, HyperX Microphone, Shure SM7B, and more.. Sturdy All-Tube Construction - Our newly upgraded mic boom arm for blue yeti features a robust all-tube metal structure capable of supporting up to 1.4kg of weight. Its design ensures stability during your recording sessions. The hidden cable management keeps your microphone's USB cable neatly tucked away.. Flexible and Adjustable - This yeti blue microphone boom arm boasts three pivoting joints, offers unparalleled flexibility. Effortlessly position your microphone exactly where you need it, thanks to the 360-degree rotation at the base and the 15in mic arm size. Achieve optimal recording angles and capture every detail with ease.. Enhanced Desk Clamp - The mic stand is equipped with a metal desk clamp, With a maximum clampable thickness of 2.6in56mm. The increased contact area ensures superior stability of mic stand desk, while the protective padding prevents any damage or scratches to your workspace.. Package include - 1 x Blue yeti mic arm, 1 x desk clamp, 1 x 38'' to 58'' adapter. If you meet any problem, please feel free to contact us, we will provide you with solution within 24H..

Support Multi-Angle Bend - The upgraded desktop microphone stand contains a piece of gooseneck tube, very convenient and easy to adjust the mic stand at any angle. Just bend the high quality tube towards the angle you want.. Max weight load 2.65pounds for straight position support 0.77pounds for gooseneck bending position.Note this mic stand doesn't work for heavy microphone such as SHURE SM58 MIC.. Non-Slip Design - There are three non-slip sponge stickers designed on the bottom of desktop mic stand, wont generate any noise or leave any scratches on table when it was moved around.. Flexible Height Adjust - You can spin the adjustable screw to adjust the height of table mic stand range 4 in10.5cm. Adjustable Height from 15.7in40cm to 19.8in50.5cm. Before adjust15.7in40cm, max heightafter adjust19.8in50.5cm. Please Note that this mic stand doesnt work for small mic such lapel headset and larger mic such as blue yeti.. Compatible with Different Microphones - The upgraded metal microphone stand desk is carried with a piece of 58 male to 38 female screw This is a spare part, which is compatible with Blue Yeti, Blue Yeti Pro, Snowball and other microphones.You can easily hold the desk mic stand at conference room,recording office,church, school and other public places..

Award Honored, Full Audio FIFINE AmpliGame A6V, a gaming mic, has earned the globally recognized iF Design Award. The PC microphone with 192kHz sampling rate delivers naturally detailed audio, making your team sound like they're right beside you. Cardioid polar pattern and 70dB SNR offer dual support for pure voice, sensitive to the front vocal and reducing background noise interference. The streaming mic helps you win more easily.. Quick Mute Button, Handy Gain Knob Immediately silence the USB microphone with a tap, preventing emotional outbursts to maintain a positive team atmosphere. RGB off when muted to indicate status and prevent streaming accidents. Mic volume control conveniently located on the condenser microphone is intuitive to use. You can speak at a comfortable level without shouting or whispering during game.. Gradient RGB Bicolored RGB cycles through 7 gradient colors automatically. Vivid lighting on the FIFINE microphone for PC enhances your glowing rig for a carnival atmosphere, immersing you in the intense game arena. The computer microphone for desktop with fixed light modes achieves a personalized experience without visual clutter, randomly matching game characters for surprise color combos.. Plug and Play The PS5 microphone is easy to install and compatible with PS4, desktop, laptop and mainstream operating systems like WindowsMac OS, without extra software. Quickly start game chat on Discord, Team and Zoom, or stream on OBS, Streamlabs and Twitch platforms. The gaming microphone PC coming with 6.6ft-long detachable USB cable ensures no interruptions or connectivity issues, even if your computer host is under the desk.. Useful Accessories The podcast microphone features durable construction. Anti-vibration shock mount with four rubber bands absorbs tremor from keyboard taps and mouse clicks. The detachable pop filter reduces plosives caused by excited speech during gaming. The stable tripod stand with rubber feet allows for optimal recording positioning via an adjustable thumbscrew, whether you're leaning back or in.. Product Includes The studio microphone comes with Shock Mount and Pop Filter1, Tripod Stand1, 6.6 feet USB Cable1, User's Manual1.

Natural Audio Clarity Operated with frequency response of 50Hz-16KHz, the podcasting XLR mic delivers balanced audio range, likely to resonate with your audience. Directional cardioid dynamic microphone corded will not exaggerate your voice, while rejects unwanted off-axis noise for vocal originality and intelligibility during your PS5 gaming streaming video recording. Tips Keep the top of end-addressing XLR dynamic microphone AM8 facing audio source, and suggested recording range is 2 to 6 in.. XLR Connection Upgrade-Ability Well-connected and smooth operation, the podcasting microphone, studio recording microphone grows alongside your studio setup equipment, like sound cards and mixers, which improves vocal speaking audio flexibility to make you explore various types of music recording singing. The black XLR streaming microphone isolates the pristine and accurate sound from ambient noise via balanced transmission with greater no interference and fidelity. XLR Cable NOT Included. USB Connection with Handy Mute Skip the hassle of setting something up and plug the cable to play the dynamic USB microphone directly, which suits for beginner creators or daily podcast. You can quickly control USB podcast microphone dynamic with tap-to-mute that is independent of computerMacbook programs to keep privacy when live streaming. LED mute reminder helps you get rid of forgetting to cancel the mute. Only available for USB connection. Soothing Controllable RGB RGB ring on the desktop gaming microphone for PC, with 3 modes and more than 10 light colors collection, matches your PC gears accessories for gaming synergy even in dim room. You can control the RGB key button of the dynamic microphone USB directly for game color scheme gaming or live streaming. Configured memory function, the streaming microphone RGB no need to repeated selections after turnning off and brings itself alive when power on. Only available for USB connection. More Function Keys Computer microphone with headphones jack upgrades your rhythm game experience and gets feedback whether the real-time voice your audience hear as expected. Get the desired level via monitoring volume control when gaming recording. Smooth mic gain knob on the PC microphone gaming has some resistance to the point, easily for audio attenuation or boost presence to less post-production audio. Only available for USB connection. Multiple Scene Use The XLRUSB PC gaming microphone is a one stop shop to pull duties for both play and work. Use the standing desktop microphone for gaming at home studio or take it on the go. Built-in 38 and 58 metal threads, the dynamic XLR microphone fits the most mic stands without external adapter. Noise-canceling windscreen cover defeats hum from nearby electrical appliances for cleaner audio. It is suggested to connect the mic to the USB-A port of the back of PS5 console..

High Quality - This mic stand adapter is well constructed made out of solid metal. Rugged metal construction ensures long life and reliable daily use. Great replacement for the cheap plastic adapter. Holds your mic on nice and sturdy.. Specialty - This 58 male to 38 female thread adapter is designed for most mic stand on the market, such as Blue Yeti mic, Blue Yeti X mic, Neewer boom arm, Blue Snowball Ice Mic, Blue Radius III shock mount.. Save Your Money - Don't need to cost a lot more to return the mic stand and re-order another stand any more. Conversion of microphone holders and accessories from 58 threads to 38. If you have some sort of mic stand or boom arm that has a small screw but your microphone has a big screw, this is the adapter for you.. Knurled Surface - This blue yeti adapter knurled surface provides excellent grip for easy installation and removal. Anti-slip, complete and deep thread without burrs, convenient to install, stable and tight.. Specification - 2 pack screw adapters. The diameter of a 58 threaded hole is about 15mm. You can check it before purchase. It's good to have a strong connection for your mic. You will feel more secure and safe knowing that you don't have to worry about the thread breaking off and your expensive mic falling off and getting damaged..

Versatile Height Angle Adjustment Adapt to any performance scenario with ease. The InnoGear mic stand features an adjustable height range from 34 inches to 60 inches, allowing you to customize it to your exact requirements. The user-friendly clutch ensures swift and precise height settings, while the 180 rotatable mic clip offers effortless angle adjustments. This ensures perfect microphone positioning every time, enhancing your performance with optimal sound capture.. Heavy-duty Stability with Non-slip Base Featuring a robust 4.5 lbs weighted round base with a 9.8-inch diameter, this microphone stand ensures solid and durable usage. The non-slip pads on the base provide extra stability, while a metal gasket between the base and stand prevents any unwanted wiggle, ensuring your microphone remains securely in place during performances.. Enhanced Sturdy Thickened Arm Constructed with a thickened 1.5mm steel arm, significantly more durable than the standard 1mm arms found in other stands, this mic stand is built to hold even the heaviest microphones without deformation. Its superior stability prevents tipping, providing reliable support for your equipment.. Detachable Portable Design This InnoGear boom mic stand can be quickly disassembled into three parts, making it highly portable and easy to set up. This feature is ideal for various settings, including stage performances, studio sessions, road shows, concerts, and outdoor events, offering unmatched convenience and versatility.. Wide Applications This upgraded mic stand fits for most types of microphones like Fifine K669B, Blue Snowball iCE, Blue Yeti, Audio-Technica AT2020, Audio-Technica AT2035, Samson Q2U, Razer Seiren X, Shure SM58, Shure PGA48, Shure SM7B and so on. Whatever your microphone of choice, this stand has you covered..

Low Profile Design The mic arm desk mount uses a low profile design so you can use it from under your monitor and offers an adjustable height from 5.7 to 27.8. We also include a detachable rise column to offer more height making it ideal for any setup. Sturdy And Stable Build Our desk microphone stand boom arm is made using sturdy metal to offer more stability and durable enough to provide long term use. Its resistant to rust and corrosion as well as featuring an anti-torsion construction for everyday use. Rotatable And Adjustable The low profile boom arm for microphone is fully adjustable and offers a 360 swivel for the microphone so you can speak, sing, and record at a comfortable angle. The adjustable head and joint allow you to get the position of the mic just right every time. Easy To organize And Use This desk stand microphone boom arm uses a clamp installation so you can easily mount it on a wide range of desks. It features a built-in cable organizer so you can reduce clutter on your desk and keep cables neatly out of sight. Versatile And Multi-Purpose The low profile mic arm features a 38 mount to provide a suitable fit for most streaming and podcast microphones. In addition, a 58 adapter is also available in the box content. Our desk mic stand is ideal for video recording, radio broadcasting, game streaming, online meetings, and much more whether at home or the office..

Desktop Microphone Stand Kit The tabletop mic stand features a 5.1 13 cm weighted metal base and non slip pads for added stability. Also includes a microphone clip mount, a 38 to 58 adapter, and two cable ties for easy use. 2 Section Adjustable The short mic holder stand adjusts in height from 7.2 to 11.8 18.2 to 30 cm, allowing for quiet and seamless adjustments, with a secure knob to prevent slipping. Metal Build Enhanced Support The desk podcast mic stand is made of metal, supporting up to 3.3 lbs, compatible with microphones accessories and equipment for podcasting, gaming, live streaming, studio video recording, etc.. Wide Compatibility Compatible with Shure SM58 SM48 PGA48 Samson Q2U dynamic microphones, and compatible with Blue Yeti Pro Snowball HyperX QuadCast SoloCast Fifine AT2020 Razer Seiren X and other mics. Easy Assembly Portable Use The desktop mic stand with all accessories weighs 1.7 lbs 772 g, and is easy to assemble and carry around, even with two cable ties for organization, as content creator essentials and influencer must haves.

Versatile Perfect for short-height miking on desktops or floors.. Compact Fits easily on desks, tables, and podiums.. Professional Durable black finish resists chips and scratches.. Compatible Adjusts 913, mounts standard mic clips and accessories..

MORE STABLE The round base with the weighted base design and will not be easily knocked down. Metal tube is stronger than ordinary plastic tube and easily support heavy microphones.. SCREW-IN STYLE STANDS Other snap-in style stands can loosen over time. However, this product comes with a screw-in style stand which is quite tight and safe, ensuring that its height remains the same without sliding.. ADJUSTABLE LENGTH With adjustable microphone stand,you can adjust the height from 9 to 14 to achieve perfect angle recording.. EASY to USE The microphone stand is easy to mount and use. You can switch clips as needed to achieve different functions.. WIDELY USAGE It is compatible with Snowball, Blue Yeti Pro, Blue Yeti, and many other microphones. Perfect for bass drum mics, podcasting , voice-overs or panel discussions. The desktop microphone stand is easy to carry, suitable for holding the microphone at the conference room, church and other public places..

StableSturdy for Ligt Mics With integrated all metal body and strengthened screws, this microphone stand boom arm is very sturdy, ensuring stability, no shaking. Its perfect for gaming, podcasting, recording, and streaming Microphone not included.Just fit for light mics,not fit for heavy-duty or studio mics. LowHigh Profile Mic Arm Design This adjustable microphone stand features a low profile design that extends from the behind of your computer screen, max extension 29, and providing an unobstructed view during intense gaming sessions.It's also able to be used as high angel mic arm.. Save Space Its much smaller than most of other mic stands in market.The maximum extension is 29 inches, suitable for large of office desktops. The sort of fold-away style of it makes it very unobtrusive when its folded for saving desk space.. DIY Customized Adjustment Its available to adjust from multiple angles. And with 1X hex wrench, you can adjust . Extended to 29 inches, this mic arm fits for your long large office desktop. With 360base hinge design, you can rotate mic as you like. Doesn't have to be super tight in order to support the weight of my microphone.You can randomly adjust to the angel and height you want.. Cable ManagementThis microphone boom stand is equipped with cable managements in order to organize your microphone cables. Neat arrangement of cable is impossible to cause excessive pulling or resulting in unexpected use, keeping your streaming setup cleaner.. UpgradedTwo Threads This one is upgraded version with strenghthened screws,staying steadily and durable in comparasion with gas arm. It comes with 3858 mount threads to accommodate different holders,fit for almost mics on marketexcept minority mics with 14 thread such as NOT fit for Blue Yeti ORB,Yeti X,Shure MV7i,Shure Beta58A etc..

Wide CompatibilityLOAD BEARING 2.2lbs With a length of 13 inches, this microphone arm stand allows you to adjust your microphone to the perfect position with its flexible gooseneck arm. The microphone clip holder has a maximum diameter of 1.38 inches, making it compatible with a variety of standard handheld mics. The included 38 to 58 screw adapter is specifically designed to work seamlessly with Blue Snowball, HyperX SoloCast and other microphones.. Robust and Durable ConstructionThe clamp base is crafted from high-quality aluminum alloy, ensuring durability and reliability. The gooseneck, with a thickness of 0.48 and a length of 13, is coated with a premium, high-priced baking paint finish, adding a touch of elegance and providing a long-lasting, premium-quality appearance. Additionally, the considerate soft cushion on the table clamp protects your furniture from scratches.. True 360 Adjustability FlexibilityExperience complete flexibility with this microphone stand's adjustable gooseneck arm. It rotates effortlessly on the table clamp, allowing you to point the microphone in any desired direction. The arm is designed to bend back and forth all-round from 0 to 360 degrees at the base, providing solid and smooth movement for precise positioning. Note It cant work with Blue Yeti Blue Yeti Nano.. Enhanced Desk ClampThe desk clamp has been upgraded to aluminum alloy construction, ensuring durability and stability. It can easily clip onto desks up to 2.24'' thick, providing a secure attachment. Additionally, the desk clamp features an integrated headset hook, allowing you to conveniently hang your headphones or earphones when not in use. This thoughtful design keeps your workspace organized and within reach.. Flexible Mounting and PortableThis highly flexible microphone snake clamp stand is designed for effortless mounting in various locations such as desks, podiums, pulpits, coffee tables, and announcers' tables. Roll it up easily to save space, and carry liberally when traveling and on a business trip. Perfect for recording and live stream on the go.. What You Get1 x 13-inch gooseneck microphone arm stand with an aluminum alloy desk clamp, 1 x 38 to 58 screw adapter, 1 x microphone holder that can securely hold handheld microphones with a maximum diameter of up to 1.38 inches. Please note that the desk clamp features two 14 holes, allowing you to mount it on the wall with the 14 screw screws not included..

Robust and quiet, Blue Compass broadcast studio-grade boom arm is durable and sophisticated, with a sturdy desktop C-clamp design, enclosed aluminium construction and internal springs. Look sleek and professional on-camera for your podcast recording, Twitch streaming, YouTube video productions and more, with the hidden channel cable management system in this Blue Compass mic stand. Keep mic angle adjustments smooth and quiet, with hand-tightened friction hinges theres no need for any tools Compass stays in place throughout your audio recordings and live broadcasting. No matter your broadcast application, the boom arm's 82-cm reach and 360-degree rotation has you covered, for a professional and versatile microphone holder letting you put your mic where you want it. Compass is the perfect microphone boom arm for mics weighing up to 2.4 pounds, including Yeti and Blackout Spark SL.

Space-saving Unlike traditional mic stands, InnoGear mic suspension boom arm is foldable, which helps free up desk space. You can easily clip and unclip the boom arm from your desk.. Upgraded Length Freely Position This boom arm has a MAX reach of 28 inches horizontally and 27 inches vertically for your convenience. It allows you to freely position microphones within adjustable range and will not bounce up.. Sturdy Material Improved Load-bearing It is made of sturdy steel, the thickness of its arm tube is improved from 0.39 inches to 0.53 inches, it can bear MAX weight of 3.5lbs.. University Compatibility 58 connector is compatible with many microphones like Blue Yeti, Blue Snowball, AT2020, AT2020USB, AT2035, ATR2500-USB, ATR2100-USB, etc.. Premium Appearance The built-in spring balance system looks more upscale and professional than other arms, which springs are exposed to the outside..

Professional Kit for Blue Yeti Nano Package comes with all you need for your Blue Yeti Nano microphones for studio recording and live sound, a microphone stand, a pop filter, a windscreen, two screws adapters 38 to 58 and 58 to 14 a mount clamp, a mic clip and five cable ties.. Foldable Mic Stand The included mic stand is fully adjustable in 135 back and forth, and 180 up and down. You can set the perfect angle for podcasting and live streaming easily and pull it out of sight when it stands idle. It is both convenient for use and space-saving for storage.. Free Angle Pop Filter The gooseneck is 360 adjustable in all directions. Freely adjust the angle and the distance between the filter and the microphone to create ideal voice, for the dual-layered pop filter effectively blocks air blasts and banishes the dreaded hissing and lisping sounds. The sound will become clear and pleasant when it's filtered in two times.. Bouncy Windscreen Protect your mics against wind interference, other noises and singers' spit, also can prevent air interference on the microphones to get the clear and nice sound. The windscreen is thick and soft enough to lower impact force . And the high-quality acoustic foam is durable for use.. Strong Compatibility This mic stand kit is applicable for your dynamic mics, Blue Yeti Nano, webcams, Blue Yeti, Blue Snowball, shock mount, condenser mics, and etc..

PREMIUM-GRADE MATERIAL BOOM ARM MIC STAND The upgraded super-strong spring prevents your microphone from accidental dropping, noise generation and shaking. Package includes a desk mounting clamp and protective layers of sponge, so you can easily clip the mic to any desktop within 5cm thickness.. HIGH-QUALITY DOUBLE LAYRED POP FILTER The microphone windscreen is used for filtering the hard-hitting sounds produced by b, t and p. It also filters out the needless background noise and sound of wind which improves the quality of sound as a result. Note Clamp the pop filter directly on the bracket, remember to clamp the plane of the bracket.. UNIVERSAL COMPATIBILITY WIDELY USED This desk microphone stand applicable to any can be installed on most standard-sized hand-held microphones and partial condenser microphones, including Blue Yeti, Blue Yeti Pro, Snowball and others. The minimum load is ZERO and the maximum load is 2.5 pounds1.14 kilograms.. ADJUSTABLE PORTABLE TO CARRY The mic arm stand consists of two adjustable arms of 35cm and it can be folded up and bended for better storage, so it is suitable for many occasions, like personal studios, broad casting and TV stations, voicesound music studio, home studio, stores and stages etc.. PRECAUTIONS FOR USE Please note that the mounting hole in the Yeti microphone is only slightly larger than 58industry standard due to the manufacturing issues. Here is the suggestion, please use the thread tape not included to wrap around the mounting screws on the arm stand and in this way, it can effectively increase the thickness of mounting screws so that it can connect to Yeti mic in a convenient way..