Professional Grade StructureThe CV axle puller is made of hardened steel and equipped with a 3.8 pound slide hammer, which has good durability. Eight bite screws, sturdy and not easily bent, ensure that they will not be damaged during the pulling process and the CV axle shaft puller tool have a long service life.. Save Time EffortWith this CV axle removal tool, you will bid farewell to traditional disassembly methods and no longer need pry bars or hammers. Quickly and safely remove stuck axles without damaging components. Save your time and effort while maintaining axle integrity.. Universal CompatibilityThis CV axle puller is suitable for most vehicles, including cars, trucks, ATVs and UTVs. It is applicable to CV joints with an outer diameter less than 95mm. It is used for various axle and joint types and is highly suitable for disassembling stubborn CV shafts, drive shafts and axles.. EfficientOur steel CV axle removal tool is made with high-quality heat treatment and comes with a 3.8-pound ergonomic puller. Even a single person can quickly and safely remove the jammed axle, enabling efficient axle disassembly. Suitable for professional mechanics and DIY axle repairs.. Worry-Free ShoppingPurchase our CV axle shaft puller tool and we offer 247 after-sales service and a 1-year warranty. If there is any damage of our CV axle puller, please contact us through Order History - Contact Seller, and we will responsibly solve your problem and provide you with satisfactory answers..

COMPLETE PROFESSIONAL KIT WITH SLIDE HAMMER This professional CV axle removal tool set includes a slide hammer for maximum impact power. Forged from heat-treated hardened steel, it delivers the durability needed for daily shop use on seized axles.. FAST, ONE-PERSON OPERATION This CV axle remover allows a single mechanic to extract stuck axles quickly, dramatically reducing labor time and cost for professional workshops.. PRECISE FIT FOR 95MM 3.75 CV JOINTS Engineered as a universal axle puller for most cars, trucks, ATVs, and UTVs with 95mm 3.75 inch CV joints. Professional Tip Always verify your vehicles specifications before service.. POWERFUL SLIP-FREE EXTRACTION The 8-bolt fixing design with high-strength screws ensures a firm, concentric grip that prevents slippage. Combined with the slide hammer, it tackles jobs that standard axle puller tools cannot handle.. SAFE, DAMAGE-FREE REMOVAL GUARANTEED Precision-engineered to remove axles without scratching hubs or bearings. The robust construction ensures operator safety and protects vehicle components, making it a risk-free, heavy-duty axle puller for any professional bay..

Note This package contains only the axle grabber tool the slide hammer is not included. The grabber attaches to a 58-18 slide hammer to function as a CV axle puller. This CV axle removal tool is compatible only with CV joints that have an outer diameter of less than 95 mm 3.74.. Universal Compatibility Built for use with most CV joint, this heavy-duty CV joint removal tool works with ATVs, UTVs, and a wide range of vehicles ideal for professional mechanics and DIY axle repairs.. Reinforced Construction Key stress points on the axle removal tool are strengthened with thick gussets on both sides of the 8 mm-thick bar to prevent deformation from repeated use. A heavy-duty nut in the grippers attachment hole provides a strong, secure link between the slide hammer and the gripping tool. These reinforcements ensure the axle puller tool maintains long-term reliability.. 8-Bolt Locking Grip Featuring eight bolt holes, this axle pulling tool allows for a customized, secure hold on the CV cup. Unlike standard pullers with basic grips, our design offers maximum clamping power and adaptability to handle even the toughest CV joints. Use the number of bolts best suited to your specific job.. Fast Damage-Free Removal Stop wasting time with makeshift methods that dont always work. This CV axle puller tools bolt-gripping design removes stuck CV axles quickly and with minimal risk of damage. Simply attach it to the axle and pull youll have it out of the differential in minutes.. Premium Build Quality Constructed from 5 mm-thick premium metal and reinforced with triangular gussets, this CV axle puller tool resists bending under stress. It comes with eight high-strength screws to keep the grip stable and secure. The rust- and corrosion-resistant powder-coated finish enhances durability and extends the tools lifespan..

Designed and engineered to fit Most ATVs and UTVs.. Ultimate Performance Assault Industries' MAS-223 Phoenix Axle features a proprietary high-temp grease blend, keeping your CV joints lubricated even during intense rides. Ride harder than ever without worrying about overheating or breakdowns.. High-Temp Performance The Axle's groundbreaking grease withstands temperatures up to 586.4F, outperforming standard OEM grease that breaks down at 365F. Sustain high speeds and extreme articulation without axle failure or loss of performance.. Oversized CV Joints for Maximum Articulation The Axle's oversized CV joints handle extreme angles, allowing you to ride at full throttle with lifts, offset A-arms, or through off-camber rock gardens, ensuring smooth performance on any terrain.. Durable Construction Built with 4340 chromoly steel and an increased shaft size, the Axle offers exceptional strength and durability, ensuring it can withstand even the toughest obstacles without bending or breaking, providing long-lasting reliability..

REMOVES STUBBORN SEIZED AXLES Engineered for stuck CV axles that standard pry forks cannot budge. Provides a 360-degree secure grip to pull axles straight out, preventing damage to transaxle housings and expensive CV boots during removal.. UNIVERSAL COMPATIBILITY Fits CV joints up to 3.75 inch 95mm OD. Perfect for ATV, UTV, and FWD vehicle maintenance including Polaris RZR, Ranger, and Can-Am models.. REINFORCED FORGED STEEL Built for demanding shop environments with high-strength forged steel. Features 8mm thick reinforcement gussets on both sides to resist bending or deforming even under extreme impact forces during heavy-duty repairs.. SECURE 8-BOLT GRIP Equipped with an eight-bolt fixing design for a custom, tight connection around the CV cup. Multi-point contact ensures maximum pulling power and stability for difficult transmission and drivetrain maintenance.. ATTACHMENT ONLY COMPONENT Includes one heavy-duty CV axle grabber with bolts. Note Slide hammer is NOT included. Ideal for mechanics who already own slide hammer or prefer to purchase their power tool separately..

Made to be the most reliable tools in the market today. Tool solutions for most all situations. Built to exceed tool standards. Removes front and rear axles, axle bearings and seals from front and rear wheel drive vehicles. Can also be used as a slide hammer for dent pulling and gear pulling duty. Includes usage instructions and photos. Also includes carry case.

Professional-Grade Construction -CV axle puller Made from hardened steel for maximum durability and longevity, Eight bite screw holes, equipped with 8 special screws, the screws are strong and not easy to bend, ensuring that they will not be damaged during the pulling process. Universal Compatibility - Works on most vehicles including cars, trucks, ATV, and UTV. Perfect for removing stubborn CV axles, driveshafts, and shafts. Complete Kit -Axle puller kits Includes slide hammer, multiple adapters, and puller attachments to handle various axle and joint types. Time-Saving Design - Removes stuck axles quickly and safely without damaging components - no more struggling with pry bars or hammers. Heavy-Duty Performance - Slide hammer provides powerful impact force to break free even the most stubborn, rusted-in axles and joints.

NotePlease check the size before purchasing. Does not come with slide hammer or rod, tool head only.In addition, the hole for connecting the slider is a 58 -18 threaded hole, so you can connect the shaft puller tool head to any 58 -18 threaded slider.. 8-Hole Fixing Our axle pulling tool is designed with eight bite screw holes and equipped with 8 special screws, which can help you easily disassemble the axle, making the disassembly process smooth and efficient.. Versatile UtilityOur handy axle tool works for almost any CV joint.Universal tool for all UTVs, ATVs, side-by-side and many other vehicles.. Robust ConstructionOur axle puller is made of thickened heavy-duty steel and can withstand the harsh requirements of automotive and ATV applications.. Widely Applicable Whether you are a professional mechanic or a DIY enthusiast, this tool will save time and energy for your automotive mechanical repair work..

EASY TO USE The CVJ CV axle removal tool quickly separates the CV Joint from the axle without removing the drive shaft. Overall CV joint tool dimension9.4x 5.7523.9cm x 14.6cm Maximum CV joint diameter 3.795mm.. ADJUST THE DIAMETER 0.7-inch 17mm clamping bar minimum shaft diameter Works on CV joint shafts with 0.7-inch 17mm or larger diameters of the groove where the rubber boot is clamped to the shaft We recommend an 18mm or 19mm minimum shaft diameter to ensure a good bite on the shaft Requires rings to hold on to Not designed for use on smooth shafts.. WIDE APPLICATION Includes 9 holes to allow full adjustment that suits different lengths of joint assemblies on most cars Fits most vehicles equipped with constant velocity U-joints.. SAFE DESIGN Handsfree operation of the CV joint puller tool allows you to easily release the retaining circlip Reduces the risk of damaging the joint, transmission, or other parts Collar ring opening accommodates axle and allows it to pass through measure your application to ensure exact fitment. PREMIUM MATERIAL This CV Joint Puller is made of high-duty steel, heat-treated, sturdy and steady, corrosion resistant, wear resistant, with reliable use and long service life..

NoteThis package contains only the tool head for the axle puller. The slide hammer is not included. The tool head can be attached to a 58-18 slide hammer to be used as a CV axle puller. Professional-Grade Construction -CV axle puller Made from hardened steel for maximum durability and longevity, Eight bite screw holes, equipped with 8 special screws, the screws are strong and not easy to bend, ensuring that they will not be damaged during the pulling process. Time-saving design - Even a single person can quickly and safely remove a stuck axle without damaging components - no more struggling with pry bars or hammers. Heavy-Duty Performance - Install the adapted slide hammer to deliver a powerful impact to break free of even the most stubborn, rusted shafts and joints. Universal - Fits most vehicles including cars, trucks, ATVs and UTVs, making quick work of removing stubborn axles.

NoteThis package includes only the axle grabber the slide hammer is not included. The grabber attaches to any 58-18 slide hammer to operate as a CV axle puller. Compatible exclusively with CV joints that have an outer diameter under 95 mm 3.74.. Universal CompatibilityEngineered to work with most CV joints, this rugged CV axle puller is suitable for ATVs, UTVs, and many vehicle typesperfect for both professional mechanics and DIY axle service.. Reinforced ConstructionHigh-stress areas of the axle removal tool are fortified with thick gussets on both sides of the 8 mm bar to prevent bending during repeated use. A heavy-duty nut at the attachment point ensures a strong, secure connection between the slide hammer and the CV axle removal tool. These upgrades deliver dependable, long-lasting performance.. 8-Bolt Locking GripWith eight bolt holes, this ATV CV Axle puller provides an adjustable, firm grip on the CV cup. Unlike basic pullers, this design delivers superior clamping force and flexibility, letting you choose the ideal number of bolts for each jobeven on stubborn CV joints.. Fast, Damage-Free RemovalForget unreliable, time-consuming methods. The ATV axle puller tools bolt-down gripping design removes stuck CV axles quickly while reducing the risk of damage. Attach, tighten, and pullthe axle comes out of the differential in minutes.. Premium Build QualityBuilt from 5 mm heavy-duty steel and strengthened with triangular gussets, this UTV CV axle puller stands up to high stress without bending. It includes eight high-strength bolts for a steady, secure hold. A rust-resistant powder-coated finish boosts durability and extends the axle removal tools life..

Remove CV Axles with Ease Orion Motor Tech's CV joint removal tool set includes a heavy-duty slide hammer, CV joint forks with 2 and 2.5 openings, a steel cable adapter, and an outer CV joint adapter, providing a comprehensive solution for efficient CV axle or half shaft removal.. Damage-Free Removal Our versatile CV joint adapter simplifies the extraction of stubborn CV axles, safeguarding transmission cases and preventing potential damage to brake and suspension components.. Heavy-Duty Slide Hammer The 22.4 slide hammer ensures a powerful and even pull for easy axle assembly removal. Its smooth threading accommodates our 58-18 adapters for versatile use with different makes and models.. Quick Easy Operation Simply attach the appropriate adapter to the slide hammer, then hook it around the inner CV joint housing. Slide the hammer back and forth, and watch as the inner CV joint effortlessly comes off.. Built to Last Constructed from heat-treated 1045 steel, our CV axle puller tool set delivers robust and reliable performance for the long term. With blackened or chrome-plated finishes, each part ensures extended durability and corrosion resistance..

MUTI-PURPOSE APPLICATION - specially designed tools help you to brake half shafts loose from the transaxle on front wheel drive vehicles quickly, easily, for diy-ers and professionals in a transmission shop, garage, or tire or body shop. ULTAR-STRONG CRAFTSMANSHIP - crafted from heavy duty steel for strength, CNC-machined anodized coated treatment for a long-last finish, ensure great strength, wearing corrosion resistace, deformation protection, satble performance and great durability. PROFESSIONAL DESIGN TOOLS - both the wedged CV axle fork and the sham spacer fork have a 14-inch long handle, the split end with a 3-inch wide opening space to fit around your CV axle shaft Popper wedge starts at a depth of 14-inch to fit into tight spaces when working. BUILT TO LAST - carefully selected and tested, premium material provides great reliability in function, performance and quality. Help you quickly and easily loosen the half shafts from the transaxle on your front wheel vehicles without damage to your vehicle. QUICK EASY OPERATION - Insert fork between transaxle case and half shaft then strike the end of the fork to release the half shaft Forked ends allow you to apply even pressure to both sides of the axle shaft to ensure a safer release than pry bars and slide hammers.

Complete Tool Kit This set only includes the tool head and 8 bolt of the axial puller and does not include the sliding hammer. The tool head can be attached to a 58-18 slide hammer to be used as a CV axle puller. Heavy-Duty Durability Crafted from high-strength carbon steel with anti-rust coating resists deformation and corrosion even under high torque, ensuring long-lasting performance for repeated axle removal jobs. 8 Bolts Holes Our shaft pulling tool has 8 custom holes on the cup body, which enables the customization of the biting position and ensures a smooth and efficient disassembly process. Safe Reliable compared to the pry bar method, it can avoid damaging the vehicle Stable tension protects vehicle components, reduces maintenance costs, and ensures safe operation. Universal Compatibility Fits most cars, trucks and other front-wheel drive vehicles seamlessly works with standard CV axle shafts, no need for multiple toolsideal for home mechanics and professional repair shops.

Complete CV Axle Service SetThis practical 4-piece toolkit includes a slide hammer, two CV joint forks 50mm 64mm, extension rod, M16 nuts, and work gloves - providing the essential tools for CV axle removal and installation tasks.. Balanced Slide Hammer DesignThe 22.9-inch 58cm, 4.7lb 2.1kg slide hammer features M162.0 threading, offering reliable pulling force for axle removal while maintaining stable operation.. Dual-Size CompatibilityEquipped with both 50mm and 64mm CV joint forks, this set accommodates various axle sizes, including those found on Ford Taurus and Lincoln Navigator models.. Practical Extension RodThe 22.9-inch extension rod helps access CV axles in confined spaces, making removal procedures more manageable in typical undercarriage conditions.. Durable Steel ConstructionMade from heat-treated 1045 carbon steel with protective finishes, these tools are designed to withstand regular professional use while maintaining their functional integrity..

Professional-Grade Hardened Steel Construction for Maximum Durability This heavy-duty CV axle puller is forged from hardened steel to withstand extreme force and ensure long-lasting performance. It features 8 reinforced bite screw holes with 8 specially designed, high-strength screws that resist bending and remain intact during stubborn axle removal.. Universal Compatibility with Most Cars, Trucks, ATVs UTVs Designed for wide-ranging use, this tool efficiently removes stubborn CV axles, driveshafts, and other shafts from most vehicle types including cars, trucks, ATVs, and UTVs, making it a versatile solution for automotive repair.. Complete Kit with Slide Hammer Multiple Attachments for Full-Service Repair The kit includes a robust slide hammer, multiple adapters, and specialized puller attachments to handle various axle and joint types, providing a professional, all-in-one solution for CV axle removal and U-joint service.. 9-Hole Adjustable Universal Joint Removal Tool for Precise Fit Featuring an adjustable 9-hole design, the U-joint removal tool can be customized to fit different lengths of joint assemblies, making it compatible with most vehicles equipped with constant velocity U-joints for precise and secure removal.. Efficient CV Joint Separation Without Driveshaft Disassembly Quickly and safely separate the CV joint from the axle without the need to remove the driveshaft. The tool measures 9.4 x 5.75 23.9cm x 14.6cm and accommodates CV joints up to 3.7 95mm in diameter, ensuring broad compatibility and time-saving performance..

Universal CV axle puller tool. Compatible with all ATV UTV models. Fits CV joints under 98mm OD.. Premium heat-treated steel axle puller. Provides maximum strength and durability for stubborn axle removal.. Heavy-duty CV axle removal tool set. Integrates heat-treated construction, universal compatibility, and an 8-screw locking mechanism.8 bolt locations ensures secure, even clamping on the CV joint for damage-free removal.. 3.8lb ergonomic slide hammer. Delivers controlled, impactful force for efficient axle removal.. It is the ultimate CV axle disassembly tool for any ATVUTV model.We offer 12 months warranty..

Easy to disassemble Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy . Material CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life. Benefits Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release Two piece CV axle popper tool kit ensures fitment for most FWD vehicles. Easy installation Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool . 100 Satisfaction Guarantee If you're not 100 satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support 12-Month Warranty..

PREMIUM CONSTRUCTION --- CV Axle Puller Tool is made of high strength steel, heat-treated, sturdy, corrosion and abrasion resistant, with a long service life.. PROFESSIONAL CRAFTSMANSHIP --- Added a 2-foot slide hammer extension bar with precision threaded design for easy assembly and straight shafts. You will have enough room and longer stroke to work better.. EASY to USE --- Our Front Wheel Drive Axle Puller Kit has a 4-pound slide hammer that creates more torque to pull out the axle. The action is smooth and comfortable in your hand. Slide adapters onto CV joints, attach slide hammer, and pull stubborn axles out in just a few minutes.. WIDE APPLICATION --- CV axle removal tool come with 48mm and 63mm CV Joint Fork Adapters as well as universal and outer CV joint adapters for a wide range of models and is versatile, Convenient and Efficient.. CONVENIENT STORAGE --- A rugged carrying case is included to keep all tool components neatly organized and stored. As a complete professional set, portable CV Axle Removal Tool Set is a must-have for anyone dealing with front-wheel drive axle repairs..

Stored at the end of an axle during rides as an easy to access multi-tool for trailside fixes. Compatible with Wolf Tooth axles that have threaded axle bolt. All bits are ED-coated and corrosion resistant. Same bits as 8-Bit System and EnCase System multi-tools. Functions include 2, 2.5, 3, 4mm hex bits and T10, T25 Torx-compatible bits choose 2 for storage in tool.

2X IMPACT FOR STUBBORN AXLESUpgrade from standard 5lb tools to our 10lb heavy duty slide hammer. The extra weight generates double the kinetic energy, providing the massive pulling force needed to pop out stubborn, seized, or rusted CV axles that lighter hammers simply can't budge. Perfect for professionals who need an inner CV joint puller that works the first time.. SAFE TRANSMISSION PROTECTIONStop using pry bars or screwdrivers that can crack or damage expensive aluminum transmission cases. Our CV axle removal tool kit ensures all pulling force is focused directly on the axle half shaft, allowing for a straight, damage-free removal. This is the essential puller tool for maintaining the integrity of your vehicle's drive train.. UNIVERSAL FORK COMPATIBILITYThis comprehensive set includes 63mm and 48mm CV joint fork adapters designed to fit a wide range of domestic and import front wheel drive FWD vehicles. The forks are precision-engineered to slide behind the inner CV joint for a secure, non-slip grip, making it a truly universal joint slide hammer for diverse automotive repair tasks.. FORGED FOR PROFESSIONAL DURABILITYBuilt for the rigors of a professional shop, both the slide hammer stick and puller adapters are crafted from high-strength, heat-treated forged steel with a rust-resistant finish. The externalinternal threading is CNC-machined for a tight, wobble-free connection that stands up to extreme impact and high-torque use without stripping or deforming.. ERGONOMIC DESIGN SECURE STORAGEFeatures a large, curved handle designed for a comfortable, secure grip, reducing hand fatigue during repetitive use. All components are organized in a heavy-duty blow-molded carrying case, ensuring your CV shaft removal tool stays protected and portable between the garage and the job site. Work more efficiently with professional-grade organization..

Save Time Effort Forget about struggling with pry bars or heavy hammers. By pairing a slide hammer with our secure locking bolts, you can use powerful, concentrated impact to efficiently remove even the most stubborn CV axles without the hassle.. Heavy-Duty CV Axle Puller Built from high-strength alloy steel and paired with a stainless steel slide hammer, this CV axle removal tool is designed for high hardness and wear resistance. It is the ideal choice for a smooth, quick removal of rusted or seized shafts.. 8-Bolt Secure Locking The 8 locking bolts on this axle shaft puller provide balanced clamping pressure, aiming to ensure a firm grip and help protect your vehicles components. Note You can choose to use all 8 bolts or fewer based on your specific job needs.. Easy to Operate Simply adjust the bolts to fit different axle joint sizes, then use the slide hammer to deliver quick, repetitive strikes at the handle end. This focused force effectively pulls out the CV axle in no time.. Wide Application This CV joint removal tool is compatible with CV joints featuring an outer diameter of less than 3.75 inches. It is suitable for use with many trucks, ATVs, and UTVs, making it a versatile addition to your garage..

Note Please check the size before purchasing.This product only is compatible with CV's with an Outer Diameter less than 76.2 mm 3 inch.. Product DescriptionDoes not come with slide hammer or rod, tool head only.In addition, the hole for connecting the slider is a 58 -18 threaded hole, so you can connect the shaft puller tool head to any 58 -18 threaded slider.. Structural Upgrade We have reinforced and hardened the handle and fastening screws of the product, allowing it to withstand greater forces without deformation.. 8 Bolt Holes for a Custom BiteOur axle puller tool has eight holes that allow for customized bite positions on the cup, ensuring a smooth and efficient disassembly process.. Versatile Utility Our handy axle tool is only suitable for vehicles with CV joint size3 inches 76.2mm. A universal tool suitable for UTV, ATV, side-by-side, and many other vehicles..

Wide Application Compatible with Polaris RZR XP Ranger, for CANAM, for Kawasaki KRX UTV SXS. Product Dimensions Pull cup inside diameter 3.72 inches, wall thickness 0.13 inches. Product Materials Made of high quality materials, the product is sturdy and reliable, and can easily remove the axle. Easy to Use Packed with a axle puller tool and matching parts, this product provides strong leverage and control for a smooth and efficient disassembly process, greatly improved maintenance efficiency. Aftermarket Service We have aftermarket service, if you have any questions about this product, please contact us by email, we will have a related teams to answer you.

SUITABLE SIZE The U-shaped CV axle removal tool has a 63 mm 2.5 in opening and a depth of 3.3 in. Made of high-quality heavy materials, durable and wear-resistant, with a long service life. The connection with the hidden stop ring can be pried away from the vehicle to meet your needs.. EASY TO USE Attach the CV axle removal tool with 58 x 18 threads not included in the package to your slip hammer, then place the adapter around the shaft once it is inside turned on and use the slip hammer to create torque to pull the axle out.. COMPATIBILITY Unlike a pry bar, this CV axle puller tool is designed to be simpler and more efficient and safe to remove without damaging the roller bearings inside the joint. Wide internal CV joint assembly for four-wheel drive and other vehicles, but not compatible with some specific models.. QUALITY MATERIAL The CV joint removal tool is made of high-hardness carbon steel, which has been heat treated to ensure a perfect fit and maximum effect. Phosphating black coloring, corrosion resistance, not easy to rust.. PACKAGE INCLUDES Inner CV axle removal tool includes shaft pulley attachment x 1, matching nut x 1. If something goes wrong, we will take care of it for you, a truly worry-free shopping experience..

SATISFY YOUR NEEDS -- Fork design has a 2-inch 5.1cm opening space to fit around your CV axle shaft Both the wedged and the shim split ends have a 12-inch 1.3cm width and a 2.5-inch 6.4cm length Popper wedge starts at a depth of 14-inch to fit into tight spaces when working.. DRIVE TRAIN SUSPENSION TOOL -- The CV axle removal tool can be used to remove the axles from the transmission, remove the ball joints in your suspension system, and remove the tie rods. This pickle fork tool set can help with many common jobs.. EASILY REMOVE CV Axle Joints -- The Fork end design of CV axle remover tools allows you to exert force evenly on both sides of the axle. Insert the wedge wheel bearing tool between the transaxle case and the axle joint with the forked ends surrounding the shaft. Strike the end of the fork to release the half shaft. Use the shim popper to fill in larger gaps found on some vehicles.. MAX STRENGTH DURABILITY -- 2pcs CV axle puller tools fit most FWD vehicles. Constructed of solid steel, designed to withstand intense pressure and powerful hammer strikes. Package includes a 14 inch long 35.6cm wedged CV axle fork and a 14 inch long 35.6cm sham spacer fork.. SATISFACTION GUARANTEE -- If you're not 100 satisfied with the item, simply return it for a full refund in 30 days. Support 1-year after-sale service. Please be assured of buying..

UNIVERSAL Suitable for disassembling the half axle drive shaft of most vehicles. Use this shaft tool kit to easily disassemble the shaft without damaging your vehicle.. PRODUCT INFORMATION This U-shaped axle removal tool has the opening size of 49 mm2-inch and 2.5-inch depth which can pry joints out with hidden retaining rings from vehicles.. PERFORMANCE This Joint Puller Tool axle popper tool kit are made of high-strength hardened steel with stable performance and reliable use and longer service life.. DIRECT INSTALL The joint pulling tool can be connected to any slide hammer with 5 8 - 18 threads, ensures fitment for most vehicles.. PACKAGE LIST Axle Popper Tool Kit Joint Puller..

PRODUCT SIZE This U-shaped CV axle removal tool has the opening size of 48 mm2-inch and 2.5-inch depth which can pry joints out with hidden retaining rings from vehicles, satisfy your needs.. EASY TO USE Attach the CV joint fork removing adapter to your slide hammers with 58-inch x 18 threadsnot included in the package, then position the adapter around the shaft behind the inner boot. Use the slide hammer to create torque to pull out the axle. Easy, yet powerful.. Benefits Unlike pry bars, this CV joint axle removing tool is designed more easier and simpler to remove axle without damaging the roller bearing inside the joint. Compatible with Ford Taurus and Mercury Sable models from 1986 to present.. PREMIUM MATERIAL This CV joint fork removing adapter is made of high hardness AISI 1045 medium carbon steel, heat-treated, sturdy and steady, phosphating and black coloring, corrosion resistant, wear resistant, with reliable use and long service life.. KIT INCLUDES This inner CV axle tool includes axle pulley attachment x 1, matching nut x 1, gloves x 1, 3pcs in box..

PREMIUM CONSTRUCTION --- 63mm CV Joint Fork Adapter is made of high strength steel, heat-treated, phosphated and black finish for durability and corrosion resistance.. SPECIFICATION --- CV Joint Puller Adapter has the opening size of 63 mm2.48inch and 3.23inch depth which can pry joints out with hidden retaining rings from vehicles, meet your needs.. FEATURE --- Easily remove the front wheel drive axle without damaging the roller bearings in joints when removing axles.. WIDE APPLICATION --- Fits the wide-style inner CV joint assembly, found on 4WD and other vehicles, but are not limited to 1997-2017 Ford 4.2L, 4.6L, 5.4L, 2010-2014 Ford SVT Raptor 6.2L, 1997-2017 Ford Expedition 4.6L, 5.4L, 2007-2015 Lincoln Navigator 5.4L.. PACKAGE INCLUDES --- CV joint fork x 1, matching nut x 1..

Versatility - 7077 Axle Cone Pliers Used on the rear axles of medium and heavy-duty trucks.Replace part number 7077.. Easy To Install - Specially designed tool gives you the leverage needed to expand the cone and remove it from the stud for axle removal,Prevents damage to hub, axle, and other components - no more hammering and banging required.. Unique Design - The cone-shaped jaws design can better grip the axle stud cone, making tire replacement more convenient.The handle is made of non-slip material, providing a more comfortable grip and preventing slipping.. High quality - Made of high quality steel, non-slip and durable,give repair professionals and vehicle owners greater freedom to fix cars and trucks.reducing the time and energy required for repair.. The product includes - 1 7077 Axle Cone Pliers.

Remove CV Axle Joints Effortlessly Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, and use the ABN 2 Piece Axle Popper Forks Ball Joint Press Kit to quickly and easily loosen the half shafts from the transaxle on your front wheel vehicles. Fits your Needs Solid steel fork design has a 2-inch 5.1cm opening space to fit around your CV axle shaft Both the wedged and the shim split ends have a 12-inch 1.3cm width and a 2.5-inch 6.4cm length Popper wedge starts at a depth of 14-inch to fit into tight spaces when working. Safe for your Vehicle Forked ends allow you to apply even pressure to both sides of the axle shaft to ensure a safe release unlike pry bars and slide hammers Two piece CV axle popper tool kit ensures fitment for most FWD vehicles. Easy to Use Insert the wedge wheel bearing tool between the transaxle case and the axle joint with the forked ends surrounding the shaft Strike the end of the fork to release the half shaft Use the shim popper to fill in larger gaps found on some vehicles. Built to Last Package includes a 14 inch long 35.6cm wedged CV axle fork and a 14 inch long 35.6cm sham spacer fork Constructed of drop-forged steel with a metallic finish, these CV joint puller ball joint tools provide maximum strength and durability.

PRODUCT SIZE This U-shaped CV axle removal tool has the opening size of 63 mm2.5inch and 3.3inch depth which can pry joints out with hidden retaining rings from vehicles, satisfy your needs.. EASY TO USE Attach the CV joint fork removing adapter to your slide hammers with 58-inch x 18 threadsnot included in the package, then position the adapter around the shaft behind the inner boot. Use the slide hammer to create torque to pull out the axle. Easy, yet powerful.. BENEFITS Unlike pry bars, this CV joint axle removing tool is designed more easier and simpler to remove axle without damaging the roller bearing inside the joint. Services the wide-style inner CV joint assembly, found on 4WD and other vehicles.. WIDE APPLICATION Applications include, but are not limited to 1997-2017 Ford 4.2L, 4.6L, 5.4L, 2010-2014 Ford SVT Raptor 6.2L, 1997-2017 Ford Expedition 4.6L, 5.4L, 2007-2015 Lincoln Navigator 5.4L.. PREMIUM MATERIAL This CV joint fork removing adapter is made of high hardness carbon steel, heat-treated, sturdy and steady, phosphating and black coloring, corrosion resistant, wear resistant, with reliable use and long service life..

Design for remove CV Axle Joint, tie rod ends, and ball joint, fitment for most FWD vehicles. Easy to separates Half-Shafts from the transaxle, loosen the half shafts from the transmission quickly. Drop forged solid steel construction with anti rust resistance, durable heavy-duty makes safe and easy replacing an axle job. Fork and Shim tool with 13-34-inch long and 2-Inch Opening 354mm length, 50mm Width ,forked ends allow you to apply even pressure to both sides of the axle shaft to ensure a safe release. Place the fork between the transmission and axle, then apply the shim tool to fill any remaining gap Strike the fork to dislodge the axle from transmission.

EASY TO USE Use axle popper tool, insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. Forked ends allow you to apply even pressure to both sides of the axle shaft, use shim popper to fill the larger gap on some vehicles. WORKED GREAT Use this CV axle shaft popper tool to easy disassembly of CV axle joint, efficient and reliable quickly loosen the half shafts from the transaxle on your front wheel vehicles, without damage to your axle. 5 minutes pounding with these and axle shaft just popped off, saving your time and energy. STRONG BUILT CV axle removal tool set is made from superior heavy duty steel for durability and corrosion free use, with standing intense pressure and hammer strikes. This kit will allow you to break half shafts loose from the transaxle on front wheel drive vehicles quickly, easily, and safely thanks to the forked design even pressure application. AXLE POPPER KIT Both the wedged CV axle fork and the shim spacer fork a 14-inch long, solid steel fork design has a 2-inch 5.1cm opening space to fit around your CV axle shaft both the wedged and the shim split ends have a 12-inch 1.4cm width and a 2.4-inch 6cm length popper wedge starts at a depth of 16-inch to fit into tight spaces when working. Note This kit is not suitable for use on all vehicles. Check your vehicle specs to ensure proper fit. WITH GLOVES Axle popper kit CV axle removal tool with nylon safety work gloves, perfect for various hand sizes, ensuring a snug fit. Whether you're a DIY-ers working out of your own home or a professional in a transmission shop, garage, or tire or body shop. CV axle popper kit suit for disassembling the half axle drive shaft of most vehicles.

Easy to Use Attach the CV joint fork removing adapter to your slide hammers with 58 inch x 18 threads, then position the adapter around the shaft behind the inner boot. Use the slide hammer to create torque to pull out the axle. Easily remove the front wheel drive axle without damaging the roller bearings in joints when removing axles. Specification This U-shaped CV axle removal tool has the opening size of 63 mm2.5 inch and 3.3 inch depth which can pry joints out with hidden retaining rings from vehicles, satisfy your needs. Benefits Unlike pry bars, this CV joint axle removing tool is designed more easier and simpler to remove axle without damaging the roller bearing inside the joint. CV joint puller adapter services the wide-style inner CV joint assembly, found on 4WD and other vehicles. Premium Material 63 mm CV joint fork removing adapter is made of high hardness carbon steel, heat-treated, sturdy and steady, black finish, corrosion resistant, wear resistant. Wide Application Fits the wide-style inner CV joint assembly, found on 4WD and other vehicles, but are not limited to 1997-2017 Ford 4.2 L, 4.6 L, 5.4 L, 2010-2014 Ford SVT Raptor 6.2 L, 1997-2017 Ford Expedition 4.6 L, 5.4 L, 2007-2015 Lincoln Navigator 5.4 L.

Easy to Use Discover effortless axle removal with our Inner CV axle removal tool Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot Use the slide hammer to create torque to pull out the axle Use lubricant fluid for added ease not included Ideal for both professionals and DIY enthusiasts. Works with Slide Hammer The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps Use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy. Product Size This U-shaped CV axle removal tool has the opening size of 48 mm2 inch and 2.5 inch depth which can pry joints out with hidden retaining rings from vehicles, satisfy your needs Designed for use with slide hammers featuring 58 inch x 18 threads slide hammer not included. Premium Material The CV joint fork removing adapter features heat-treated, corrosion-resistant carbon steel with a black oxide finish, ensuring steadfast performance and longevity Perfect for robust, rust-resistant CV joint repairs, it includes a 48 mm opening and 2.5 inch depth to suit various applications. Perfect Fit This CV joint puller tool offers added torque, ensuring easy removal without harming roller bearings Compatible with Ford Taurus and Mercury Sable models from 1986 to present, plus various other vehicles including UTVs and FWD models.

Use CV Axle Puller To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.. Excellent QualtiyThe overall design of the slide hammer is ergonomic, the 10.5 lb. curved slide hammer is heavier and larger, twice as much as a regular slide hammer, and the 19.5 inch length ensures that the slide hammer is long enough to create more pulling force, saving you physical effort and increasing your productivity with this versatile slide hammer. Easy to OperateAttach the CV joint puller to the slide hammer then slide the CV axle puller adapter around the shaft at the rear of the inboard side finally use the slide hammer to increase torque and pull the axle out. Fits most vehicles such as Fits Ford TaurusSable 1986-2021. Superior Material Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials with high persistence and durability, not easy to break.. Package Included The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All the tools needed to remove a CV shaft or half shaft are included in a premium durable plastic carrying case..

Carbon Steel Constructed from durable carbon steel, this tool offers exceptional hardness and structural integrity. The rust-resistant coating extends its lifespan, ensuring reliable performance even in challenging workshop environments.. CV Axle Removal This CV axle puller removal tool is engineered to safely extract CV joints with hidden retaining rings from front-wheel-drive vehicles. It provides a controlled and efficient method for removing axles during transmission, differential, or CV joint repairs without damaging surrounding components.. Damage-free Axle Extraction The tools specialized design minimizes the risk of harming the axle shaft, wheel bearings, or transmission seals during removal. By distributing force evenly and gripping securely, it helps prevent repairs and ensures the axle can be reused or replaced smoothly.. Standard Designed to work with common 58 - 18 threaded slide hammers, this puller attaches securely to generate consistent pulling force. This compatibility makes it a versatile addition to existing tool sets, simplifying the axle removal process for mechanics and DIY users.. Application This puller is suitable for a wide range of front-wheel-drive passenger cars, crossovers, and light trucks. Its adaptable design accommodates various CV joint sizes and configurations..

Front Wheel Drive Axle PullerThis front wheel drive axle puller attachment can easier remove front wheel drive axles without damaging the roller bearing inside the joint, this CV joint axle removing tool is designed to pull joints with hidden retaining rings from FWD vehicles.. SpecificationsThis U-shaped CV axle removal tool has a 48 mm 2-inch opening and a depth of 2.5 inches. It is recommended to use with slide hammers or long extensions featuring a 58-18 thread size.. Premium QualityMade from high-strength steel, this CV joint fork removal adapter undergoes heat treatment for enhanced durability and extended service life. The phosphating process and black finish boost corrosion resistance, ensuring dependable, long-lasting performance.. Easy to UseConnect the CV joint fork removal adapter to your slide hammer equipped with 58-inch x 18 threads not included. Then position the adapter around the shaft behind the inner boot, use the slide hammer to create torque to pull out the axle. Complete the task swiftly and effortlessly.. Wide ApplicationDesigned to fit Ford Taurus and Mercury Sable models from 1986 onwards, this inner CV axle removal tool offers versatility and practicality. Whether you're servicing a regular vehicle or a specialized model, this slide hammer attachment ensures efficient and effective results..

WIDE FWD VEHICLE COMPATIBILITY Axle popper kit is fit for most FWD vehicles, which is made according to the prototype model. Precision-engineered to fit most front-wheel-drive FWD vehicles, this kit is built to OEM-style specifications for reliable compatibility with a wide range of makes and. VERSATILE AXLE REMOVAL FUNCTION Removal of half axle drive axles on most vehicles and repair of damaged circulating axles. Designed to safely remove stubborn half-shaft drive axles from transaxles, it also supports repairs for damaged CV axles, making it a go-to tool for suspension and drivetrain maintenance. SAFE, EVEN-PRESSURE OPERATION Forked ends allow you to apply even pressure to both sides of the axle shaft to ensure a safe release unlike pry bars and slide hammers. The dual-fork design distributes pressure evenly across the axle shaft, eliminating the risk of damage to the transaxle, seals, or axle boots that often occurs with pry bars or slide hammers. EFFICIENT CV AXLE SERVICE Using the axle popper kit to quickly and easily loosen the half shafts from the transaxle on your front wheel vehicles. This tool simplifies the often difficult process of removing stuck half-shafts, cutting down on repair time and making even stubborn axles easy to service in minutes. SOLID STEEL CONSTRUCTION SPACE-SAVING DESIGN Solid steel fork has an opening space to fit around your CV axle shaft, and fit into tight spaces when working. Crafted from heavy-duty steel for maximum durability, the forked design features a wide opening to fit around CV axles while still accessing tight engine bay spaces, ensuring reliable use even in cramped conditions.

Auto Truck Maintenance. Applies even pressure to both sides of shaft. Shim included in kit to fill larger gap found on some vehicles. Insert fork between transaxle case and half shaft then strike the end of the fork to release the half shaft.

Tapered on both ends of the wedge along with a 6 shaft to fit into your air hammer. Safer than using a pry bar. Applies even pressure to both sides of the shaft for sure release of the shaft.

Separates Half-Shafts from the Transaxle. Kit Includes a Shim Tool to Fill Gaps. Better and Safer than Using a Hammer and Bar. Heavy-Duty Construction Allows for Strength and Durability. Whether Tuning Up Your '68 Corvette or Changing The Oil on a Tractor, CTA Can Supply You with the Tools Needed to do the Job.

Even Pressure Distribution The forked ends of this cv axle popper set evenly distribute pressure on both sides of the axle for a secure and safe release. unlike traditional pry bars or slide hammers, this design minimizes damage to your vehicle while providing superior performance for most front wheel drive applications.. Premium Forged Steel Kit This complete set includes a 14 inch cv fork and a 14 inch spacer fork, both crafted from drop forged steel with a polished metal finish. built for maximum strength and longevity, these tools are a must have for professional mechanics and diy enthusiasts alike.. Durable Steel Construction Featuring a robust solid steel fork with a 2 inch opening to fit most cv axles, this kit includes wedge and spacer ends measuring 12 inch in width and 2.5 inches in length. the popper wedge has a precision depth of 0.64 cm to access tight spaces, ensuring durability and reliability in every use.. Versatile Application Simply insert the wedge tool between the axle housing and joint, allowing the fork end to wrap securely around the axle. apply controlled pressure to release the half shaft effortlessly. the included spacer popper adapts to larger gaps, making this set ideal for a wide range of vehicle .. Easy Axle Removal Skip the hassle of traditional slide hammers and pry bars with this efficient 2 piece axle spring ball joint kit. designed for quick and effortless loosening of half shafts on front wheel drive vehicles, this tool simplifies your automotive repairs with its intuitive design..

Insert fork between transaxle case and half shaft then strike the end of the fork to release the half shaft. Shim included in kit to fill larger gap found on some vehicles. Applies even pressure to both sides of shaft. Safer and surer than a pry bar.

Insert fork between transaxle case and half shaft then strike the end of the fork to release the half shaft. Shim included in kit to fill larger gap found on some vehicles. Applies even pressure to both sides of shaft. Safer and surer than a pry bar.

Wide Compatibility Designed to fit most front-wheel drive FWD vehicles, this axle popper kit is built according to prototype , ensuring a fit for your car.. Efficient Axle Removal Quickly and easily remove half axle drive axles and repair damaged circulating axles, saving time and effort in your vehicle maintenance tasks.. User-Friendly Design The forked ends of the tools apply even pressure on both sides of the axle shaft, ensuring a safe and controlled release, unlike traditional pry bars or slide hammers.. Versatile Application Ideal for loosening half shafts from the transaxle of front-wheel drive vehicles, making this kit a must-have for both professional and DIY mechanics alike.. Durable Construction Made from solid steel, this axle popper kit features a unique design that fits around CV axle shafts and can easily access tight spaces during repairs..

Premium Quality This kit includes a 14-inch cv fork and a 14-inch spacer fork, both crafted from drop-forged steel with a polished metal finish. built for maximum strength and durability, these tools withstand heavy use and provide reliable performance. the polished finish not only looks professional but also resists , ensuring long-lasting use.. Easy to Use Skip the hassle of complicated slide hammers and pry bars with this 2-piece axle spring ball joint kit. designed for quick and easy loosening of half shafts on front-wheel-drive vehicles, this tool simplifies your workflow. the intuitive design ensures even beginners can achieve professional results without unnecessary strain or effort.. Efficient Release The forked ends of this tool distribute pressure evenly on both sides of the axle, ensuring a secure and safe release. unlike traditional pry bars and slide hammers, this design minimizes the risk of damage to your vehicle. suitable for most front-wheel-drive vehicles, its a must-have for any mechanic or diy enthusiast.. Durable Construction Featuring a solid steel fork design with a 2-inch opening, this tool accommodates most cv axles effortlessly. the wedge and spacer ends measure 12 inch in width and 2.5 inches in length, providing versatility. the popper wedge starts at a depth of 0.64 cm, perfect for accessing tight spaces during repairs, ensuring you can tackle any job with confidence.. Versatile Handling Simply insert the wedge tool between the axle housing and joint, allowing the fork end to wrap around the axle. apply gentle pressure at the fork's end to release the half shaft effortlessly. the included spacer popper fills larger gaps on certain vehicles, making this tool adaptable to a wide range of automotive repairs..

Forked Steel Design This axle popper kit features a solid steel fork with an open center that fits securely around your CV axle shaft, allowing even pressure on both sides to safely release the half shaft without damaging seals or bearings like traditional pry bars or slide hammers.. Efficient Axle Removal The CV axle removal tool enables quick and easy separation of front-wheel-drive half axles from the transaxle during repairs, saving time and reducing frustration compared to improvised methods that risk component damage.. Wide Compatibility Designed specifically for most FWD vehicles, this axle popper kit works effectively on common domestic and import where circulating or damaged drive axles need servicing or replacement in home garages or professional shops.. Durable Steel Construction Made entirely from high-strength steel, each tool in this axle popper kit resists bending or breaking under heavy load, ensuring long-lasting performance through repeated use in demanding automotive repair scenarios.. Complete 2-Piece Set The package includes two axle popper tools of varying sizes to handle different CV joint configurations, giving you the right fit for multiple FWD applications without needing additional specialty tools..

FITMENT The axle popper kit is compatible with most FWD vehicles, carefully designed based on the prototype model for precise application.. MAIN FUNCTION Ideal for the removal of half axle drive shafts on most vehicles and for repairing damaged circulating axles effectively.. EASY USING Equipped with forked ends that apply even pressure on both sides of the axle shaft, ensuring safe and efficient release compared to pry bars and slide hammers.. APPLICATION Designed for quick and easy loosening of half shafts from the transaxle on front-wheel drive vehicles, saving time and effort.. UNIQUE DESIGN Features a solid steel fork with an opening space that fits around CV axle shafts and accommodates tight spaces during repair work..

APPLICATION Specially designed tools help you to brake half shafts loose from the transaxle on front wheel drive vehicles quickly, easily, for diy-ers and professionals in a transmission shop, garage, or tire or body shop.. MATERIAL Made of superior heavy duty steel for strength, great reliability and long service life Manufactured to OEM specification, meet or even exceed OEM standard in function, performance and quality.. FUNCTION Perfect tools use to quickly and easily loosen the half shafts from the transaxle on your front wheel vehicles without damage to your vehicle Insert fork between transaxle case and half shaft then strike the end of the fork to release the half shaft Forked ends allow you to apply even pressure to both sides of the axle shaft to ensure a safer release than pry bars and slide hammers.. DESIGNBoth the wedged CV axle fork and the sham spacer fork have a 14-inch long handle, the split end with a 3-inch wide opening space to fit around your CV axle shaft Popper wedge starts at a depth of 14-inch to fit into tight spaces when working.. Satisfaction Guarantee If you're not 100 satisfied with our products, simply return it in 30 days for a full refund, with unconditional refund guarantee and 12-month warranty..

Easy disassembly of CV axle jointUsing the Axle Popper Forks Ball Joint Press Kit, you can quickly and easily loosen the half-axle wheeled vehicle from the front drive axle without damaging the axle's complex sliding hammer puller kit and pry bar.. Suitable for your needsThe fork-shaped end allows you to apply uniform pressure on both sides of the half shaft to ensure a safe release different from the pry bar and the sliding hammer the two-piece CV shaft ejection tool kit ensures that it is suitable for most FWD vehicles . The solid steel front fork is designed with an open space that can be installed around your CV axle the Popper wedges start at a depth of 14 inch to fit the tight space at work.. Easy to useInsert the wedge-shaped wheel bearing tool between the transaxle housing and the shaft joint, with the fork-shaped end surrounding the shaft tap the end of the front fork to loosen the half shaft use shim popper to fill the larger gap on some vehicles.. Package IncludeThe package includes a wedge-shaped CV axle fork and a dummy gasket front fork these CV joint puller ball joint tools are made of forged steel with a metal finish to provide maximum strength and durability.. Satisfaction GuaranteeWe committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months Warranty..

This isn't just another way to strike the axle-shaft it's a true axle-shaft puller.. Includes most common 58 - 18 Axle Stud Adapter Set. Additional adapter sets available.. Spring-loaded driver pin is case hardened and maintains direct contact with the center of the axle flange.. Fully adjustable pulling arms and stud adapters are quick and easy to install.. Eliminates damage to axle studs..

Easy To Remove CV Axle --- With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing.. Heavy Steel Slide Hammer --- Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break.. Efficient Slide Hammer --- The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently.. Wih 63mm 48mm Joint Fork --- Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use.. This kit include 1 heavy duty slide hammer 1 opening 63mm cv joint fork 1 opening 48mm cv joint fork 1 manual puller 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft, all the tools put in a plastic case, easy to carry..

Heavy-Duty Slide Hammer The 22.4 slide hammer ensures a strong, even pull for easy removal of axle assemblies. Its smooth threads work with our 58 - 18 adapters for different makes and models. Damage-Free Removal This versatile CV joint adapter ensures easy, nondestructive removal of stubborn CV axles, protecting the transmission case and preventing damage to brakes and suspension components. High Quality Durability The Axle Puller Tool made of high-quality materials and precision craftsmanship, heat-treated, durable, corrosion-resistant, wear-resistant, long service life. Easy to Use Simply install the appropriate CV fitting fork removal adapter onto the slide hammer and hook it around the inner CV fitting housing. Slide the hammer back and forth and watch as the inner CV joint comes off effortlessly. 1-Year Warrantee If you are not satisfied with our Axle Puller Tool, we will REPLACEMENT or REFUND it unconditionally.If you have any questions please contact us by amazon email.

Application For Ford Taurus and Mercury Sable FWD models from 1986 to current. For slide hammers with 58-inch x 18 threads, use on front wheel drivevehicles-fix damaged CV Joints. Suitable for disassembling the half axle drive shaft of most vehicles. Material Made of iron and steel, which has high hardness, high strength, with stable performance and reliable use and longer service life. Easy to Operate The CV joint pulling tool can be connected to hammer with 5 8 - 18 threads and allows you to generate additional torque to loosen and remove the stubborn shaft and water pump. Use the CV shaft can easily saving your time and energy. Advantages The internal CV shaft removal tool is better and safer than using a hammer and rod. The two-piece CV shaft Popper tool kit ensures that it is suitable for most FWD vehicles. Package Included 4 Pcs inner CV axle removal tool set front wheel drive axle puller - as shown in the picture.

CV Axle Removal Tool Universal Tool 12020 axle popper kit is designed to remove axle half shafts from most front wheel driveFWD vehicles. A must have tool set for removing stubborn frozen stuck axles, efficient, fast, safe and non-destructive removal. CV Axle Puller Fork-shaped tool that helps to pull the CV axle, easily remove the CV axle from the trans without damaging the axle seal shield aluminum transmission. The fork-shaped CV axle pulling tool evenly applies pressure to both sides of the shaft, releasing the shaft faster and safer. Compared with the traditional single-sided prybar, it is not easy to jump when used and will not damage the surrounding parts. Quality CV Axle Puller Tool The CV axle remover is made of high-quality steel in one piece and then laser cut. Well made, strong no bending heavy-duty tool. Great quality, performance, value axle removal tool. Remove The Half-shaft in Minutes Easy to use cv axle puller set. Slide a wedge fork tapered fork into the gap, tap the end of the handle with a hammer and within minutes the axle will pops out. If necessary a shim fork full thickness fork can be used to fill a larger gap. 12020 Axle Removal Tool Set The axle popper kit include 1 wedge fork and 1 shim fork. The wedge fork is a tapered fork with a slope, and the spacer fork is a full-thickness flat fork. The wedge fork gradually makes the gap larger, and the spacer fork fills a larger gap. Fork for CV axle removal.

Pickle Fork Separator Tool The tapered fork wedge design of this ball joint separator tool focuses on the fundamentals of machine technology for an easy and uncomplicated process. Precision Performance Striking the handle with a hammer separates the ball joint cleanly Designed with a 1516 inch opening for a firm hold and secure removal. Hardened Steel The heat treated steel alloy construction of this ball joint separator stands up to tough jobs Zinc plating resists rust and extends service life. Thoughtful Design Ball joint separator handle features a nonslip knurled texture Used as designed, this front end service tool will stand up to years of use. Versatile Uses This universal ball joint separator can be used for a variety of repairs For example, the ball joint tool can also be used on CV drive shafts.

IT TAKES TWO This CV axle removal tool includes a 13-34 fork and shim, equipping you with both tools so you can easily tackle any configuration of a vehicles front wheel drive. COOL UNDER PRESSURE Both the axle shift fork and shim are constructed from hardened steel to withstand the intense pressure involved in heavy duty projects. EVEN-KEELED The forked design of this CV axle puller allows you to apply equal pressure to both sides of the axle shaft, resulting in an efficient and reliable half shaft removal. EASY AS PIE The simplicity of the pickle fork design means you can remove the shaft in fewer steps Keep your hands and mind in one place at a time with this CV axle tool set. GET A FOOT IN THE DOOR The fork's low-profile wedge makes it easy for you to engage the half shaft, whether by striking the drive shaft tool or using it like a pry bar.

UNIVERSAL SIZING This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job.. COMPLETE SET The discs sizes range from 18mm 0.7 inches all the way to 65mm 2.51 inches in 1mm increments plus 74mm 2.91 inches. All discs are connected with a 12mm 0.47 inches shaft and screw which quickly connects to a 180mm 7.08 inch handle, making for a complete and effective wheel bearing driver set.. EASY OPERATION This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally.. HEAVY-DUTY DURABILITY With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use.. PROTECTIVE CARRYING CASE Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

PULL FRONT WHEEL HUBS This wheel hub puller set by Orion Motor Tech includes a universal 3-34'' to 4-12'' hub puller, a 58 inch x 18 forcing bolt, a fasten lug nut, and a helpful socket to quickly and easily loosen and remove your front wheel hubs. UNIVERSAL COMPATIBILITY The front hub puller, compatible with most vehicles with independent front wheel suspension, firmly locks onto your axle assembly, making removal of stuck front hubs a cinch. QUICK EASY OPERATION These automotive tools work together to provide straight and even force so your front hub pops out smoothly, leaving the wheel bearing inside the joint and the rest of your vehicle untouched. BUILT TO LAST Made of premium AISI 1045 medium carbon steel, our wheel hub removal set provides strong and dependable service for the long haul heat treated and blackened or chrome plated, each part offers superior durability and corrosion resistance for long-term use. MULTI-FUNCTION The threading of our forcing bolt works with other 58 inch x 18 adapters to deal with various car models or to handle other work around your engine.

PULL WHEEL HUBS AXLES This flange type axle puller tool set by Orion Motor Tech includes a universal 3-34 to 4-12 hub puller, 4-12 to 5-12 axle puller, 58 inch x 18 forcing bolt, fastening nut, and helpful socket to quickly and easily loosen and remove your wheel hubs. UNIVERSAL COMPATIBILITY The front hub puller, compatible with most vehicles with independent front wheel suspension, firmly locks onto your axle assembly, making removal of stuck front hubs a cinch. QUICK EASY OPERATION These automotive tools work together to provide straight and even force so your hubs and axles pop out smoothly, leaving the wheel or axle bearing inside the joint and the rest of your vehicle untouched. BUILT TO LAST Made of premium AISI 1045 medium carbon steel, our wheel hub removal set provides strong and dependable service for the long haul heat treated and blackened or chrome plated, each part offers superior durability and corrosion resistance for long-term use. MULTI-FUNCTION The threading of our forcing bolt works with other 58 inch x 18 adapters to deal with various car models or to handle other work around your engine.

DESIGN CONSIDERATIONS The two piece design of this kit means that users have multiple options for the safest and most efficient possible use. Strike the axle popper wedge or use it as a prybar to release the half shaft, and when you need something to fill the gap between the half shaft and transaxle, the included shim is the perfect tool for the job. The forked ends of these tools apply even pressure to both sides of the shaft you're working on for safer use, so it's easy to get the job done safely.. APPLICATIONS Whether you're a diy-er working out of your own home or a professional in a transmission shop, garage, or tire or body shop, this kit will allow you to break half shafts loose from the transaxle on front wheel drive vehicles quickly, easily, and safely thanks to the forked design's even pressure application.. ITEM SPECIFICATIONS This 2-Piece Axle Popper Set includes a 14-inch fork and a shim for quicker, easier, and safer work on front wheel drive vehicles when you need to break half shafts loose from the transaxle. The fork opening measures 1 78 inches.. EASY TO USE The forked ends of these tools apply even pressure to both sides of the shaft you're working on for safer use, so it's easy to get the job done.. Material CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life.

Easy and simple to use, get the tandem pin released and slide tandem in a minute. Very durable made of heat treated stainless steel. Light weight, easy to take it around or store it in your truck tool box. Reduces downtime and no need to put a second person in harm's way. Recommended for users weigh over 190 lbs.

Sizes included M20 x 1.25, M20 x 1.50, M22 x 1.00, M22 x 1.50, M24 x 1.50, M24 x 2.00, 1316 Inches x 20 UNF, 34 Inches x 20 UNF, and 27mm extension bar. Thread chaser set is designed to clean or repair spindle thread, axle studs and wheel stud threads.. There are vertical grooves that run across the radial threads. These grooves act as channels for expelling gunk and rust removed when cleaning and repairing threads.. The extension bar helps to keep the axle nut straight while torquing the axle spindle nut.. This thread restorer set comes with a convinent case to keep your rethreading dies organized for efficeint storage and portability..

REBUILD YOUR CAR The ABN CV Puller is a prop shaft puller and CV joint remover that allows you to crimp clamps on driveshaft axle boots and rebuild front half shafts 9.4-inch x 5.75-inch 23.9cm x 14.6cm overall dimensions with 3.7-inch 95mm maximum CV joint diameter. FITS YOUR VEHICLE Includes 9 holes to allow full adjustment that suits different lengths of joint assemblies on most cars Fits most vehicles equipped with constant velocity U-joints. ADJUST THE DIAMETER 0.7-inch 17mm clamping bar minimum shaft diameter Works on CV joint shafts with 0.7-inch 17mm or larger diameters of the groove where the rubber boot is clamped to the shaft We recommend an 18mm or 19mm minimum shaft diameter to ensure a good bite on the shaft Requires rings to hold on to Not designed for use on smooth shafts. SAFE Handsfree operation allows you to easily release the retaining circlip Reduces the risk of damaging the joint, transmission, or other parts Collar ring opening accommodates axle and allows it to pass through measure your application to ensure exact fitment. BUILT TO LAST Body constructed from zinc-plated steel, Bar constructed from black-oxide coated steel for maximum strength and longevity that resists rust and corrosion.