Fits Axial SCX24 AXI00001 C10.AXI00002 JEEP Wrangler.AXI00006 Ford Bronco. Note Not fit SCX24 Deadbolt AXI90081.B-17 Betty AXI00004.Gladiator AXI00005. Double Links design can avoid friction with the drive shaft and provide better flexibility. Stainless steel ball joint prevents oxidation.higher ground clearance. Includes ShortMediumLong Links6.Y-Links2.Steering Rod Tie Links1.Screws20.Wrench1.

Many RC batteries extend runtime but make small crawlers feel heavy. This scx24 battery helps solve that with a compact 53 x 30 x 16mm form that works with compatible SCX24 series RC cars. This 7.4v lipo battery delivers 20C discharge and Burst 40C, helping you keep longer play time without losing the responsive feel.. Low-price batteries can become expensive when they need fast replacement. This scx24 battery helps avoid that cycle with practical output and repeat-use value. A dependable 7.4v lipo battery gives you a more efficient way to spend on RC power over the long run.. Compatibility problems usually come from overlooked details. This scx24 battery uses a PH2.0 plug, 7.4V voltage, and 53 x 30 x 16mm 2.09 x 1.18 x 0.63inch dimensions for compatible SCX24 series RC cars. This 7.4v lipo battery makes spec checking easier before purchase.. When your RC car hits uneven paths, loose dirt, or small climbs, battery stability matters. This scx24 battery supports 20C discharge and Burst 40C to help provide climbing power and forward traction in complex outdoor driving scenes. The 7.4v lipo battery setup helps maintain control and response.. A battery should improve the full experience, not just charge the car. This scx24 battery helps support smoother power, less waiting, and more enjoyable use with compatible SCX24 series RC cars. This compact 7.4v lipo battery helps turn each run into a more satisfying session..

Good Quality -- Made of high quality material, high sensitivity, and quickly dissipate heat, stable and low-noise. Replacement Accessory -- Well-controlled, A great replacement for the old or damaged RC part. Stable performance --Reinforced metal gears, enhance anti-interference ability, make RC car respond quickly. Widely use -- Exquisite part, perfect for Axial Scx24 or RC Helicopters, small robots, and other models. Attentive service --Equipped with servo bracket and horn, easy to install, make more fun for RC.

Compatible with AXIAL SCX24 Jeep Gladiator. Lightweight design considers performance while providing a beautiful and aggressive appearance. Anodic oxidation sandblasting process is adopted on the surface to make the color brighter. Complete accessories,Meet all installation conditions.

Compatible with SCX24 Gladiator AXI00005 124 RC Crawler, NOT FIT Other SCX24 Models.. Replaces the original SCX24 Stock Y-link, avoids friction with the drive shafts for smoother ride.. Higher clearance links for better performance when driving over obstacles. The Linkage Made of High Quality Aluminum 7075 Anodized, for lightweight and durable performance..

Each weighs 8g, installed on wheel to attain a better grip of tires, which increases stability when passing obstacles.. The slight increase in weight also loweres the centre of gravity to avoid flipping backwards and ensure the best balance.. There are 2 pieces in a Set, better meet the needs of RC enthusiasts.. CNC machined solid brass billet, can stand wear and tear.. Fits for 124 RC Crawler Axial SCX24..

Fits Axial SCX24 Deadbolt AXI90081.C10 AXI00001.Jeep Wrangler AXI00002.B-17 Betty AXI00004.Jeep Gladiator AXI00005.Ford Bronco AXI00006. Precision CNC machined solid brass billet.. 5.6g each fitted to the front and rear axles to lower the vehicles center of gravity.increase its stability.. Includes 5.6g brass Diff Cover2.Screws12.Wrench1.

Compatible with SCX24 Gladiator AXI00005 124 RC Crawler, NOT FIT Other SCX24 Models.. Replaces the original SCX24 Y-link, avoids friction with the drive shafts for smoother ride.. Higher clearance links for better performance when driving over obstacles. Made of High Quality Aluminum 7075 Anodized, for lightweight and durable performance..

Compatible with Axial SCX24 AXI00005 Jeep JT Gladiator 124 RC Crawler. Replaces the original SCX24 Y-link, moves the links away from the driveshaft so that no rubbing. Made of Quality aluminum,Precision CNC machined,Anodized,easy to install.

Etched with the INJORA logo, looks more attractive.. High-quality stainless steel construction, argent finished to prevent corrosion.. Stainless steel material drive shaft let you crawl and climb with confidence.. Lightweight upgrade, not only looks great but performs well.. Suit for Axial SCX24 Gladiator Dodge Power Wagon Upgrade Parts. Not compatibilities with C-10, Jeep JLU,B-17 Betty, Deadbolt.

The new upgrade, a larger 050 size brushed motor option for the Axial SCX24. 050 Motor PRO provide increased power and torque compared to the stock motor. Rotor with a strong structure guarantees outstanding performance and super durability. High Torque Strong Magnet, tuned for Rock Climbing. Fits for Axial SCX24 Gladiator AXI90081 AXI00002 AXI00001 and so on.

Made of high-quality brass and etched with the INJORA logo, looks more attractive. The black hard coating with chamfered edges adds a bright touch to your car, to prevent corrosion also. Compared with the original parts, it provides a better center of gravity and helps to improve rear traction and stability. Three kinds of brass counterweight combination, save your time to choice. The perfect upgrade part, suit for 124 RC Crawler Axial SCX24 AXI90081 gladiator.

Packing ListThis RC car tool kit including 4.0 5.5 box spanners, 0.05inch 1.3mm 1.5mm drill tips and 2.0 Phillips tips Hex Screwdriver and 1 handle. All of these tools are necessary for having a great experience while tuning and maintaining your SCX24 FCX24 car.. Upgrades Nut DriversTo offer the better experience when you using these SCX24 FCX24 tool kit, we increase the drill bit of 5.5 box. Better to meet the needs of rc car enthusiasts.. Unsurpassed GripThe knurled handles offer awesome grip, you can still use it properly even when youre sweating away in the summer sun.. High PrecisionThe Allen Keys are made of proven HSS steel, are precision designed for excellent fit, long life, and unbelievable torque.. ApplicationThe INJORA hex driver rc tool kit set, perfect for SCX24 Gladiator Bronco C10 JLU Deadbolt FMS FCX24 and other general purpose models.. AGE RECOMMENDATION Not for children under 14 years..

These 39mm shocks are machined from alminum and feature threaded bodies for quick pre-load adjustments.. Internally these use shock oil not included instead of the typical friction dampening and employ bladder seals for consistent rebound dampening. Use shock oil to add only enough oil for a heavy coating. Do not fully fill shock body.. Three spring rates are included allowing you to fine tune these shocks to your chassis.. The INJORA aluminum threaded long travel shocks are a great option for adding travel to your Axial SCX24 or FMS FCX24M.. Compressed length eye-to-eye is 27.5mm1.08in without Oil, travel without oil is 10.2mm0.4in..

CNC-machined Aluminum shock bodies, high protection and long durability.. Double Barrels Shock, telescopic design for maximum travel.. Long travel shocks for the AX24SCX24 are ready for anything and everything you have to throw at them.. 2 different spring rate options to cater to every rigs setup and weight. The compressed length hole-to hole is 27mm 1.06in.. Fit Axial AX24 SCX24 Upgrade RC Crawler Car..

Etched with the INJORA logo, looks more attractive. CNC Hardened steel construction, black finished to prevent corrosion. Steel center drive shaft let you crawl and climb with confidence. Lightweight upgrade, not only looks great but performs well. Suit for Axial SCX24 Gladiator AXI00005 Axial Upgrade Parts. Not compatibilities with C-10, Jeep JLU,B-17 Betty, Deadbolt.

Note Not compatible with SCX24 Deadbolt.. Stainless steel materials construction stand hard wear and tear.. Enhanced structure design for long-life durability.. Scale Joint and spline diameter size for realistic appearance,ideal parts for upgrade.. D-Shaped hole desgin offer tighter connection to transmission and axles.. AGE RECOMMENDATION Not for children under 14 years..

CNC Hardened steel construction, strong and durable. Etched with the INJORA logo, black finished to prevent corrosion. Easy installation, stable performance and long service life. Lightweight upgrade instantly enhances overall performance in handling. Compatible with Axial SCX24 C10 JLU Bronco Base Camp 4Runner.

Four combinations of SCX24 brass upgrade parts to meet the needs of RC car enthusiasts. Compatible with Axial SCX24 original parts, solid and durable. Compared with the original parts, it provides a better center of gravity and helps to improve rear traction and stability. The black hard coating with chamfered edges adds a bright touch to your car, to prevent corrosion also. The perfect upgrade part, suit for 124 RC Crawler Axial SCX24 AXI90081 Deadbolt Gladiator Bronco C10.

Note Not compatible with SCX24 GX470. Compatible with SCX24 C10, Wrangler, Bronco, Deadbolt, Gladiator and Dodge Power Wagon.. Two types of wheelbase are adjustable and the included magnetic mount can fit various bodies, highly flexible.. Larger 8 angled skid plate has more outstanding performance in climbing.. Multiple-Shock-Mounting-Points design for better suspension tuning.. Come with extra trays and side panels to put electronic equipment easily..

Engraved with the INJORA logo, CNC machined brass links for ultimate durability. Heavy brass links can lower the center of gravity to improve stability. Moves the links away from the driveshaft so that no rubbing. The links eliminates axle wrap and unwanted axle steer, and it has higher clearance in climbing. Compatibilities with SCX24 Gladiator Dodge Power Wagon. Not compatibilities with C-10, JLU,B-17 Betty, Deadbolt.

Perfect for SCX24 Gladiator Axial 124 RC Crawler Car. Not applicable for SCX24 Deadbolt B17 C10 JLU Bronco. The link body made of 304 stainless steels, High quality and durable. Upgrade the rod details, higher degree of simulation but still have an affordable price. Replace the original Y-type connecting rod of SCX24 to avoid friction with the drive shaft and provide smoother running power. A high-clearance linkage set eliminates axle wrapping and unnecessary axle steering and provides higher clearance on hill climbs.

CNC black anodized aluminum link for ultimate durability. Replace plastic links, cancel SCX24 original Y-link. Moves the links away from the driveshaft so that no rubbing. The links eliminates axle wrap and unwanted axle steer, and it has higher clearance in climbing. Compatibilities with SCX24 Gladiator. Not compatible with C-10, JLU,B-17 Betty, Deadbolt.

Precision CNC machined aluminum steel construction, stability and durability.. Black anodized for durability, corrosion resistance and good looks.. Come with steel 0.3 mod transmission gear set, increased wear resistance and improved service life.. Hardened gears provides an excellent upgrade in strength and reliability to the scx24 transmission.. Transmission gear set 51T 19T, spur gear 0.3 Mod, 55T, pinion gear 11Tnylon..

Made of high quality metal, easy to install. Effectively protect the body shell, enjoy the fun for RC Car. Equipped with metal tow hooks and LED lights, improve the degree of simulation. The perfect SCX24 upgrade part, stinger bumper looks more cool and attractive. Metal front bumper for Axial SCX24 Gladiator Bronco JLU Deadbolt C10 B17 Axial Upgrade Parts.

Metal Skid Plate is made of high-quality brass and etched with the INJORA logo, high-quality reliable.. Compared with the stock parts, it provides a better center of gravity and helps to improve rear traction and stability.. The black hard coating with chamfered edges adds a bright touch to your car, to prevent corrosion also.. Easy to install, solid and durable,better protect your transmission when the RC car is crawling.. The RC skid plate upgrades parts suit for 124 RC Crawler Axial SCX24 Gladiator Bronco C10 JLU Deadbolt AXI90081..

High precision CNC machined.. Made of brass for enhanced strength.. 14g weighted design enhances stability.. Simple installation, directly replaces stock parts.. Package list 1 steering links, weight 14g..

Grey anodized aluminum CNC link for ultimate durability. Engraved with the INJORA logo, look more attractive. Replaces the original SCX24 Y-link, avoids friction with the drive shaft, provides a smoother ride. Links eliminate axle wrap and unwanted axle steering, and it has a higher clearance when climbing. Suit for 124 RC Crawler Car LWB 133.7mm Axial SCX24 C10 JLU Bronco Base Camp 4Runner.

Upgrades for 124 Axial SCX24 Deadbolt DeadboltC10JLUBase CampGladiatorDoogeBroncoLEXUSChevrolet..... Easy to install and durable.Smooth and excellent damping effect. Keeping all four tires in contact with the ground on uneven terrain. SCX24 Shocks set come with 2sets different replace springs, moderately soft and hard. Hole center to hole center 48mm1.88in Afte compression27mm1.0inch.

Note Not compatible with stock shocks, you must upgrade to aluminum shocks. Not compatible with INJORA big bore shocks. Not compatible with INJORA LCG chassis, only for SCX24 stock rails and shock mount. Not compatible with INJORA buggy body, only for SCX24 stock body.. Note Not compatible with SCX24 GX470.. CNC machined, black anodized for lightweight6g and durable.. Easy to install and disassemble, engraved with left and right logos, it is clear and easy to identify.. INJORA flex blades allow for greater articulation in the suspension and keep your wheels on the ground when going over larger obstacles.. A must own for SCX24, best way to get flex and it functions smooth with the servo.. Suitable for stock shock mounts, better experience the fun of SCX24 crawler car..

Engraved with the INJORA logo, CNC machined brass links for ultimate durability. Heavy brass links can lower the center of gravity to improve stability. Moves the links away from the driveshaft so that no rubbing. The links eliminates axle wrap and unwanted axle steer, and it has higher clearance in climbing. Compatibilities with SCX24 Gladiator Dodge Power Wagon. Not compatibilities with C-10, JLU,B-17 Betty, Deadbolt.

New upgraded motor material for better performance. High Torque Magnet and Rotor, smoothness for best reliability. Heat-resistance running motors allow faster speeds, longer runtime. The motor shaft length is more suitable to ensure not touch the transmission cover. Fits for Axial SCX24 Gladiator Bronco C10 JLU Deadbolt B17 and so on.

Suitable for Axial SCX24 Deadbolt C10 JLU Gladiator Bronco 124 RC Crawler. US patented Patent No. US D1,052,393 S 3-Section-CVD structure effectively minimizes the wobbles of front wheels while cornering to level up the steering performance, further more, your little monster will get a max. 52steering angle which is larger than stock axle's steering angle to explore more fun and possibilities with you. Front axle 74.8grams, rear axle 24.6grams, the axle housing is made of nylon material via injection molding, which provides better flexibility while conquering tough terrains. Comes with brass steering knuckles for extra weight, other parts e.g. diff gears, diff covers, servo mount and steering links are made of high quality aluminium alloy for greater durability, strength and stability to get the competence against fierce driving. We set 5mm extended in width at each side to the axles to get more clearance while steering thus allowing more tire selections.. Please be noted that these nylon ISO axles are not the same as MEUS metal ISO axles, only steering knuckles, CVD and gears are compatible. The servo mount and the rear link riser are the same as stock axles, not compatible with MEUS metal ISO alxes.. Front and rear axles are equipped with 2-14T diff gears, 2-16T gear available in package for rear axle to get underdrive and faster front wheel speed to prevent the buggy from rolling over while climbing.

CNC machined with exquisite appearance, greater hardness and durability. Adjustable length design, short one is 45mm to 58mm adjustable, long one is 67.3mm to 95mm adjustable.. Simple installation, universal joint design, larger drive angle and low noise.. Suitable for Axial SCX24 Gladiator Power Wagon.

Double bent links provide higher clearance when climbing for improved passability, allow you the most flexibility with your build. There are 2 materials links to choose from Aluminum Alloy and Titanium Alloy, which are scratch-resistant and wear-resistant. Replace SCX24 stock Y-link, avoid friction with the drive shaft, and offer smoother travel. Nylon rod ends and brass pivot balls. Suit for SCX24 Gladiator AXI00005 124 RC Crawler Car with 155mm wheelbase.

CNC aluminum machined, Black anodized, improves the overall performance.. Made of aluminum alloy and steel, anodized surface, front axle 54g1.94oz, rear axle 27.5g0.97oz.. New version Steering knuckle,5mm Widened for the axle. Front axle with servo mount,rear axle with upper link mount, diamond-cut diff cover. NOTE servo mount width is 23mmonly suit original servo , if use others servo , need change servo mount . Fit for SCX24 Series All RC Crawler.

Fits Axial SCX24 Deadbolt AXI90081.C10 AXI00001.Jeep Wrangler AXI00002.B-17 Betty AXI00004.Jeep Gladiator AXI00005.Ford Bronco AXI00006. Extending the track width5mmea.for a wider stance and greater control and stability. Produced By CODA RACING.Precision CNC machined solid brass billet. 2g each fitted to the wheels to lower the vehicles center of gravity.increase its stability.7mm hex matching stock wheel hub. Includes 2g brass Hex Hubs4.pins4.nuts4.

Stainless steel links for SCX24, Black Coating, looks more attractive, High precision machining, stable and reliable, improves the overall performance.. This is a replacement scx24 stock plastic link. Only for Axial SCX24 Gladiator dodge power wagon, Not available for Deadbolt AXI90081, B-17 Betty AXI00004, SCX24 Jeep JLU AXI00002, C10 AXI00001, Bronco AXI00006.. Replaces the stock SCX24 Y-link, avoids friction with the drive shaft, provides a smoother ride. Links eliminate axle wrap and unwanted axle steering, and it has a higher clearance when climbing.. Easy to install, Etched with the RampCrab logo, look more attractive.. Spare parts to upgrade and modify your 124 SCX24 RC Crawler Car..

Made of high quality metal, easy to install. Effectively protect the body shell, enjoy the fun for RC Car. Equipped with metal tow hooks and LED lights, improve the degree of simulation. The perfect SCX24 upgrade Part, looks more cool and attractive. Metal front bumper for Axial SCX24 AXI00002 Jeep Wrangler JLU and Axial SCX24 AXI00005 Jeep JT Gladiator..

RampCrab 124 LCG Low Center of Gravity chassis frame for SCX24, made of high-quality Carbon Fiber material, not easy to deform or break.. 7 design create a lower center of gravity ,changed the layout of the car,stronger climbing ability.. Added many shock mount points for better suspension tuning.. Come with Steel links Skid plate, Redesigned the link length to perfectly fit the Stock car Body, easy to DIY and assembly, good parts for replacing and upgrading RC car models.. This LCG frame chassis kit is suitable for 124 RC Crawler SCX24 Gladiator Dodge power wagon..

Axial Body Set, Clear SCX24 Jeep JT Gladiator, AXI200005.

Compatible with Scale 124 AXIAL SCX24 Deadbolt AXI90081, Jeep AXI00001.C10, AXI00002.B-17, Betty AXI00004 SCX24 Gladiator AXI00005,SCX24 Bronco AXI00006 RC Crawler Truck Car. Made of Quality Brass, 7geach,add weight to the axle which lower the vehicles gravity, increase the stability.. CNC machined for precision.Increased strength and precision.Easy upgrade from the original part. Geart Value,Package include 2x Brass Boulder Bars Weights As shown.

The rc roof light bar compatible with Axial SCX24 Bronco C10 JLU Gladiator Deadbolt 124 RC crawler and 118 rc crawler used it as the roof light. 8 kinds of light modes White Light, Warm Light, Red and Blue Light Flash, Red and Blue light Flash Alternately, White Light Flashes, Light Moves Left and Right, Yellow Light Double Flash, Colorful Lights Flow The scx24 roof lights can be mount in the rc roof or luggage,designed to make your RC crawler more cool and attractive.. The rc roof light kit is made of metal material ,designed for long-lasting performance.. Working Voltage5V-7V Connect Plug Type3Pin Male JR Plug, it can be powered by the rc receiver.and use the 3-channel to control it.. Light Quantity12Led14Led Optional Led Light Bar Length45mm1.7712Leds ,57mm2.2414Leds Easy to install and remove.Come with L-shaped bracket, or you can fixed it with double-sided tape.Not include .

Scale DetailHigh simulation of the rock sliders, looks more attractive and expressive. Better UpgradeIncrease the side collision avoidance ability, better protection of RC car body. Excellent PerformanceAbrasion and pressure resistance, strong corrosion resistance. Unique DesignWeight 28g 0.99oz, add some extra weight to the car. Applicable ModelsPerfect fit for the Axial SCX24 equipped with the Gladiator body.

Fits Axial SCX24 Deadbolt AXI90081.C10 AXI00001.Jeep Wrangler AXI00002.B-17 Betty AXI00004.Jeep Gladiator AXI00005.Ford Bronco AXI00006. Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance. Includes FrontRear Bridge2.Steering Knuckle2.Rod Tie Links1.Servo Mount1.Rear Links Mount1.Screws. Note This kit does not include gears, bearings and drive shafts.

Self-devoloped 2.4GHz technologyStabler performance and greater anti-interference ability, comes with power amplifier to extend the remote control distance to ground distance max.300 meters and air distance max.800 meters. This transmitter only works with 2.4GHz receivers from MEUS Racing, not compatible with receivers from other brands.. Up to 8 channelsExcept for throttle and steering handwheel, this transmitter comes with one 3-gear channel, two knob-channes and three button-channels, 8 channels in total for flexible operations.. Clear UI and color screenAllows you to get real-time parameter of each channel at a quick glance.. All Terrains AvailableThis RC transmitter and receiver kit can be used for off-road, on-road use e.g. RC crawler, RC short course car, RC boat, RC motorcyle etc. and various scale models e.g. 15 18 110 118 124 scales.. Great FunctionalityThis RC transmitter is equipped with fail safe, low-voltage warning and intergrated with massive functions to meet different customization needs, not only great for beginners but also ideal for pros.. User-friendly and Ergonomics Design1 Comes with lock function to avoid misoperation, 15s auto-off function and it's rechargeable 2 The 4-bearing structure wheel and the anti-slip trigger with adjustable force and position ensure smoother and accurate operation.. Please be noted that this transmitter can't storage mutiple model settings, everytime you change to a new model itrequires binding process..

CNC Machined Billet Steel links for SCX24 Gladiator Dodge power wagon , Black Coating, looks more attractive, High precision machining, stable and reliable, improves the overall performance.. This is a replacement scx24 stock plastic link. Only for Axial SCX24, spare parts to upgrade and modify your 124 SCX24 RC Crawler Car.. Links eliminate axle wrap and unwanted axle steering, and it has a higher clearance when climbing.. Easy to install, Etched with the RampCrab logo, look more attractive.. ONLY REAR, 4PCS, 71mm 78.5mm.

Strong and Durable Made of high quality metal. More robust, impact-resistant and wear-resistant.. Perfect Performance Equipped with lights. Fine workmanship and perfect style. Upgraded parts improve overall performance in terms of handling and durability.. Convenient to Use Easy and convenient to install and remove.. Add More Fun Nice accessories to modify and upgrade your RC car to add details and personality. Ideal for RC car fans.. Excellent Upgrade Part Perfectly compatible with your 124 Axial SCX24 AXI00005 Gladiator..

This Spring Steel Universal Joint Drive Shaft is Compatible Axial AX24 SCX24 Deadbolt AXI90081, JLU AXI00002, C10 AXI00001, B-17 Betty AXI00004, SCX24 Gladiator AXI00005, Bronco AXI00006 RC Crawler, power wagon. RampCrab CVD front rear axle shafts made of hardened Spring steel material, better hardness. Sturdy and durable, easy to install.Easy to replace and durable in use. Universal joint axles allow up to 50 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.. Come with bearings nuts. What can you get 2 x Universal Joint Drive Shaft 2x Rear shaft for Axial SCX24 AX24 RC Car. Stock Axle length.

Brass Portal Axle New UpgradesHigh-quality 124 RC upgrade accessories, Suit For Axial SCX24 AXI00001 C10 AXI00002 AXI90081 JLU Bronco AXI00006 Gladiator AXI00005. extreme off-road capability that takes you rc car to new places and new adventures.. Heavy Brass SCX24 Portal AxleSuitable for Axial SCX24 portal axles front rear axle fit for 124 Axial SCX24 RC Crawler Car Model. SCX24 crawler car built for extreme off-road capability that takes you to new places and new adventures. You can try a more perfect axle full brass upgrade. Premium axleEasy to install 124 rc axial SCX24 axles the total length is 117mm4.61in, and other installation accessories are attached, scx24 axle metal front Rear axle easy to install, perfect fit, make your remote controlled car cool and attractive. Heavy Brass upgrade enhances car's performance in handling and durability, providing unmatched driving versatility.. Brass Front and Rear Portal AxleFull Brass material SCX24 axle housing Full Brass shell CNC, internal steel gear and drive shaft, excellent properties, high reliability. 124 RC car Portal Axle is equipped with four brass weights, the new brass weight system allows for precise and easy addition of weight to your crawler. Help with climbing and stability by lowering your center of gravity.. inbox1 x SCX24 Brass Front axle, 1 x SCX24 Brass Rear axle. AMK provides complete after-sales service and installation guidance for more other upgraded accessories, we will reply you within 24 hours.

Premium SCX24 upgrades for 124 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco.. Made of aluminum alloy and brass, anodized surface, front axle 85g3oz, rear axle 35g1.2oz.. US patented Patent No. US D1,052,393 S lsokinetic 3-section CVD ensures that there is no jerks when turning at large angles, 52 max. steering angle.. Front and rear equipped with customized 2-14T gears, by replacingm the gears of rear axle to 2-16T gears, you can get 14 underdrive.. Support high torque adjustable servo mount, adjustable height rear axle structure with upper link mount, diamond-cut diff cover..

Compatibility WithOGRC center driveshaft is suitable for Axial SCX24 Gladiator AXI00005Don't fit for other rc models. Suoperior Steel MaterialCNC Hardened steel construction ,Designed for extreme performance applications, the heavy-duty U-joint driveshaft adds extra material to critical areas for even greater strength. And Ensuring maximum durability and for long time service life.. Great PerformanceThe SCX24 Gladiator drive shaft offer the ultimate in torque handling and efficient power transfer for steel constant-velocity front or rear application. Screws and nuts fit perfectly, not fear of speeding and jumping.. Easy To InstallThe SCX24 Gladiator driveshaft comes pre-assembled and ready to install with screw pin. Precision machining, perfectly combined with gear, more smoother transmission.. What You Get1 x Long Drive Shafts, 1 x Short Drive Shafts, 4 x Screw. If you are not 100 completely satisfied with our products, please do not hesitate to contact us, we will sincerely serve you..

Compatible with Axial SCX24 Gladiator Bronco C10 Deadbolt AX24, TRX4M, FCX24. Beadlock design, don't need to glue, with a 7mm sleeve, convenient to install. Aluminum rim is sturdy and durable, and also lower the vehicle's center of gravity, increase vehicle stability. Package include 4 x 1.0 Beadlock Wheel and Tire, 1 x 7mm Sleeve. If you are not satisfied with our product received, you can contact us for help.

The SCX24 RC Steering Rod Tie Links fit for 124 RC Crawler Axial AX24 SCX24 Deadbolt AXI90081, Jeep JLU AXI00002, C10 AXI00001, B-17 Betty AXI00004, SCX24 Gladiator AXI00005, Bronco AXI00006 RC Truck Car. RampCrab SCX24 Brass Steering links reduce the slop in the steering linkage, and help to create a more precise steering assembly, Brass Steering links for extra weight down low. Brass steering links for SCX24 RC car made of high quality metal, solid and durable. Package includes servo link,drag link and screws. Well design and made, prefect upgrade parts for your 124 SCX24 RC car.

Good use for upgrade Axial SCX24 DeadboltBase CampLexusDooge Power WagonGladiatorC10JLU 124th scale electric rock crawler car. Made of Aluminum Alloy material,high protection and long durability.. Easy To Install.Smooth and excellent damping effect.. Hole center to hole center43mm1.69inch After compression23mm0.9inch. Come with 3sets different springs, meet the needs of your car upgrades.

Note Not fit SCX24 Deadbolt AXI90081.B-17 Betty AXI00004.Gladiator AXI00005. Fits Axial SCX24 AXI00001 C10.AXI00002 JEEP Wrangler.AXI00006 Ford Bronco. Double Links design can avoid friction with the drive shaft and provide better flexibility. Ball joint prevents oxidation.higher ground clearance. Includes ShortMediumLong Links6.Y-Replace Links2.Steering Rod Tie Links2.Screws20.Wrench1.

The Upgrades Brass Wheel Weights Compatible with Axial SCX24 Deadbolt AXI90081, AXI00001 C10, JLU AXI00002 , B-17 Betty AXI00004, Gladiator AXI00005,Bronco AXI00006 124 RC Crawler Truck Car.. The Upgrades Wheel Adapter About 13g 0.46 Oz per one, fitted to the wheels to lower the vehicles center of gravity,increase its stability.7mm hex matching stock wheel hub. This RC upgrades parts made of solid brass.CNC machined for precision,Stable in performance, not easy to oxidize and rust.. The Brass Extended Wheel Weights Hex Adapter can extending the track width for a wider stance and greater control and stability.. Package Included4 x 13g 0.46 Oz Hex Wheel Weight Hubs,4 x Pins,4 x Nuts.Easy installation and upgrade..

Compatible withAXIAL SCX24 JEEP Gladiator AXI00005. NOTENot fit AXIAL SCX24 Deadbolt 90081.C10 AXI00001.JEEP AXI00002. B-17 Betty AXI00004.Ford Bronco AXI00006. Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance.. Includes FrontRear Bumper2.Screws10.Wrench1.

Compatible withAXIAL SCX24 JEEP Gladiator AXI00005. NOTENot fit AXIAL SCX24 Deadbolt 90081.C10 AXI00001.JEEP AXI00002. B-17 Betty AXI00004.Ford Bronco AXI00006. Double Links design can avoid friction with the drive shaft and provide better flexibility.higher ground clearance. Red ball joint Provide better visual effect. Includes ShortMediumLong Links6.Y-Links2.Steering Rod Tie Links1.Screws20.Wrench1.

Compatible with AXIAL SCX24 Deadbolt AXI90081,C10 AXI00001,Jeep JLU AXI00002,Gladiator AXI00005,Bronco AXI00006. CNC machining provides smaller clearance and high-precision, High-quality stainless steel materials with oxidation resistance, high hardness and wear resistance. Extending the track width5mm for a wider stance and greater control and stability. 14g each,suitable under shaft counterweight. Accessory support,Meet all installation conditions.

Made of high-quality carbon fiber material, strong and durable, not easily damaged.. It is compatible with SCX24 Gladiator stock parts and adds many shock mounting points for better suspension tuning.. This chassis includes cross braces, battery tray and necessary hardware to create an incredibly capable, competition ready upgrade for your SCX24 Gladiator rig.. The 6 design allows for a lower center of gravity. Our chassis kit offers an impressive skid plate angle that allows you to conquer the most intimidating obstacles.. Note This low center of gravity chassis is not suitable for Axial SCX24 Deadbolt JLU C10 Bronco..

CNC machined billet aluminum,strong corrosion resistance.. Easy to install, solid and durable.. Five colors to choice, great looks.. Better protect your transmission when the RC car is crawling.. Prefect upgrades parts for 124 RC Crawler Axial SCX24 AXI90081..