Good Quality -- Made of high quality material, high sensitivity, and quickly dissipate heat, stable and low-noise. Replacement Accessory -- Well-controlled, A great replacement for the old or damaged RC part. Stable performance --Reinforced metal gears, enhance anti-interference ability, make RC car respond quickly. Widely use -- Exquisite part, perfect for Axial Scx24 or RC Helicopters, small robots, and other models. Attentive service --Equipped with servo bracket and horn, easy to install, make more fun for RC.

Note Come with adjustable rear axle truss upper link mount. Only compatible with the SCX24 stock rear link mount and INJORA rear axle truss upper link mount SCX24-78.. Planet-Inspired Axle Design Planet-shaped differential housing, precisely CNC-machined for a highly realistic scale appearance. Seamless integration with the axle tubes enhances visual accuracy.. 4mm Width Per Side Adds a total of 8mm width to enhance stability while maintaining scale accuracy.. Double Joint Shaft Design Minimizes outer wheel vibration when turning at extreme angles.. Precision CNC Aluminum Steering Link Shortens the distance between the steering link and the axle housing, ensuring a compact and clean design without excessive protrusion.. Hardened Steel 216T Worm Gear Set Made from aerospace-grade 20CrMnTi hardened steel for smooth, consistent performance and exceptional durability on tough terrain.. Brass Steering Knuckles Adds front axle weight for improved traction, better climbing capability, and enhanced steering response..

Made of high-quality brass and etched with the INJORA logo, looks more attractive. Compared with the original parts, add weight to the axle which lower the vehicles gravity, increase the stability. The black hard coating with chamfered edges adds a bright touch to your car, to prevent corrosion also. There are 2 pieces in a set, easy to install, suitable for 124 RC Crawler Car front and rear axles. Compatible with Axial SCX24 original parts, suit for Axial SCX24 Gladiator Bronco Deadbolt C10 JLU 90081.

The RC hex hub is made of brass, solid and abrasion proof.. Heavier weight helps lower the center of gravity for improved stability.. Extends the wheel stance for enhanced stability during crawling.. Fit wheel rim which center aperture is bigger than 3mm.. Compatible with Axial AX24 SCX24 upgrade..

Compatible with Axial SCX24 C10 AXI00001, Wrangler AXI00002, Gladiator AXI00005, Bronco AXI00006, Deadbolt AXI90081. Replacement of factory PartsSCX2483, SCX2484, front and rear portal axle alum housing with steel gears. Increase the ground clearance, easily pass through obstacles, and greatly improve climbing performance. Increase chassis weight of the crawlers, increases the stability of the crawlers. RCAWD has a professional service team, please contact us when you need help..

Compatible with AXIAL SCX24 AXI90081 124 RC Crawler Truck Car. CNC machined for precision,easy upgrade from original ones. These option parts made of quality 6061-T6 aluminum, Anodized, for lightweight and durable performance.. Package include Rear Diff Housing 1, Hardware included As shown.

Note Only compatible with the SCX24 stock rear link mount and INJORA rear axle truss upper link mount SCX24-78.. Planet-Inspired Axle Design Planet-shaped differential housing for a highly realistic scale appearance. Seamless integration with the axle tubes enhances visual accuracy.. Lightweight Nylon Axle Tubes Molded from high-strength nylon in a one-piece design, featuring reinforced ribs for added durability.. 4mm Width Per Side Adds a total of 8mm width to enhance stability while maintaining scale accuracy.. Double Joint Shaft Design Minimizes outer wheel vibration when turning at extreme angles.. Aluminum Steering Link Shortens the distance between the steering link and the axle housing, ensuring a compact and clean design without excessive protrusion.. Hardened Steel 216T Worm Gear Set Made from aerospace-grade 20CrMnTi hardened steel for smooth, consistent performance and exceptional durability on tough terrain.. Brass Steering Knuckles Adds front axle weight for improved traction, better climbing capability, and enhanced steering response.. Adjustable Rear Truss Link Mount Widens upper-lower link spacing and enhances anti-squat geometry for better uphill performance..

Etched with the INJORA logo, looks more attractive.. High-quality stainless steel construction, argent finished to prevent corrosion.. Stainless steel material drive shaft let you crawl and climb with confidence.. Lightweight upgrade, not only looks great but performs well.. Suit for Axial SCX24 Gladiator Dodge Power Wagon Upgrade Parts. Not compatibilities with C-10, Jeep JLU,B-17 Betty, Deadbolt.

Quality MaterialsStainless steel materials construction stand hard wear and tear.. Abrasion ResistantEnhanced structure design for long-life durability.. Details UpgradedD-Shaped hole desgin offer tighter connection to transmission and axles.. Standard SizeScale joint and spline diameter size for realistic appearance.. Suit for Axial SCX24 JLU C10 Bronco Base Camp 4Runner RC car 124 RC crawler upgrade parts..

Advanced SCX24 Differential Gear Achieve a 50 speed increase with differential gears, while the scx24 bevel gear design ensures higher transmission efficiency,allowing faster speeds on flat terrain and reducing the risk of rollovers, making your driving experience more enjoyable. 10 MM Extended Axles Upgraded scx24 front and rear axles with 10 mm extended design increase tires spacing and improve stability,prevent rollovers on rugged terrain. They also provide compatibility with a wider range of tire options. Enhanced Ground Clearance Engineered with an additional 10 mm of ground clearance compared to standard models, our scx24 portal axles provide excellent clearance for navigating rough and uneven terrains with ease. Weights Brass Wheel Hex Precision-machined brass wheel hex hubs reduce the center of gravity, enhance scx24 chassis stability, and optimize overall weight distribution for improved your scx24 crawling performance. All Metal Structure Axles Constructed from aluminum alloy with CNC machining, our metal scx24 extended axles deliver outstanding wear resistance and durability, guaranteeing performance even under the most demanding conditions. Compatible With SCX24Axial SCX24 BroncoC10DeadboltWrangler JLU CRCJT GladiatorGX470Basecamp.AXI90081 AXI00001 AXI00002 AXI00005 AXI00006 AXI-1532T1 AXI1219T2 RC Crawler.

CNC machined, stainless steel coating finish to prevent oxidation, make RC car more attractive.. Easy installation, stable performance and long service life.. Includes a long and a short, better meet the needs of RC enthusiasts, ideal parts for Upgrade.. Fine workmanship, adjustable Lengths. Short 40mm to 52mm, Long 57mm to 83mm. Suits for SCX24 C10 JLU Bronco Base Camp 4Runner Upgrate Parts. NOTE NOT Compatible with SCX24 Deadbolt AXI90081B17.

Compatible With SCX24Axial SCX24 BroncoC10DeadboltWrangler JLU CRCJT GladiatorGX470Basecamp.AXI90081 AXI00001 AXI00002 AXI00005 AXI00006 AXI-1532T1 AXI1219T2 RC Crawler. 10MM Widened Design Our scx24 extended portal axles feature a 10mm widened design, significantly improving stability and allowing compatibility with a wider range of tires for enhanced performance. High Clearance Axles Experience superior off-road capabilities with our scx24 high clearance axles, designed to navigate tough terrains effortlessly, making your rc crawler more versatile. Precision CNC Machining Each scx24 portal axles are crafted using advanced CNC machining techniques, ensuring precise fit and durability, so you can trust our scx24 upgrades to withstand rigorous use. Weight Brass Hex The included brass hex not only strengthens the connection but also optimizes the overall weight distribution of your scx24, enhancing performance and stability during operation.

Upgrade for all 124th scale RC crawlers car Axial SCX24 Deadbolt,Gladiator,Chevrolet,Bronco,Dodge Power Wagon,Base Camp.... Made of aluminum and Steel gear,excellent workmanship and high precision. Engineered to meet the exact specifications of the SCX24, ensuring a seamless installation and optimal performance.. This aluminum axles easy to replace original plastic axle or damaged axles,easy to install and move.. The axles are 4mm extended,it more stable than the standard axle..

Upgrade for all 124th scale RC crawlers car Axial SCX24 Deadbolt,Gladiator,Chevrolet,Bronco,Dodge Power Wagon,Base Camp.... Made of aluminum and Steel gear,excellent workmanship and high precision,these axles are built to withstand the rigors of off-road driving.. Engineered to meet the exact specifications of the SCX24, ensuring a seamless installation and optimal performance.. This aluminum axles easy to replace original plastic axle or damaged axles,easy to install and move..

V2 upgraded version of MEUS Racing ISO axles, suitable for Axial 124 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco.. ISO V2 brings two key updates 1 Shoulder screws on steering knuckles to provide better fixment, won't easily fall off. 2 Modifed diff cover, screws can be hide properly to prevent the axles from being jammed under certain circumstances. Front axle 83g and rear axle 32g, comes with brass steering knuckles and diff cover, aluminum servo mount and axle housing for overall protection and higher performance while conquering different terrains. US patented Patent No. US D1,052,393 S Isokinetic 3-section CVD effectivelyminimizes the jerks when turning at large angles and support max.52 steering angle.. Front and rear equiped with customized 2-14T gears, by replacing the gears of rear axle to 2-16T gears, you can get 14 underdrive..

Suitable for Axial SCX24 Deadbolt C10 JLU Gladiator Bronco 124 RC Crawler. US patented Patent No. US D1,052,393 S 3-Section-CVD structure effectively minimizes the wobbles of front wheels while cornering to level up the steering performance, further more, your little monster will get a max. 52steering angle which is larger than stock axle's steering angle to explore more fun and possibilities with you. Front axle 74.8grams, rear axle 24.6grams, the axle housing is made of nylon material via injection molding, which provides better flexibility while conquering tough terrains. Comes with brass steering knuckles for extra weight, other parts e.g. diff gears, diff covers, servo mount and steering links are made of high quality aluminium alloy for greater durability, strength and stability to get the competence against fierce driving. We set 5mm extended in width at each side to the axles to get more clearance while steering thus allowing more tire selections.. Please be noted that these nylon ISO axles are not the same as MEUS metal ISO axles, only steering knuckles, CVD and gears are compatible. The servo mount and the rear link riser are the same as stock axles, not compatible with MEUS metal ISO alxes.. Front and rear axles are equipped with 2-14T diff gears, 2-16T gear available in package for rear axle to get underdrive and faster front wheel speed to prevent the buggy from rolling over while climbing.

V2 upgraded version of MEUS Racing ISO axles, suitable for Axial 124 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco. ISO V2 brings two key updates 1 Shoulder screws on steering knuckles to provide better fixment, won't easily fall off. 2 Modifed diff cover, screws can be hidden properly to prevent the axles from being jammed under certain circumstances. Front axle 76g and rear axle 32.3g, comes with brass steering knuckles and diff cover, aluminum servo mount and axle housing for overall protection and higher performance while conquering different terrains. US patented Patent No. US D1,052,393 S Isokinetic 3-section CVD effectivelyminimizes the jerks when turning at large angles and support max.52 steering angle. Front and rear equiped with customized 2-14T gears, by replacing the gears of rear axle to 2-16T gears, you can get 14 underdrive.

Compatible WithThe SCX24 front axle shaft fits for SCX24 C10JLUBroncoGladiatorDeadbolt RC crawler car.. Great PerformanceThe SCX24 Axle Shaft provide great transmission efficiency to help your crawler car adapt to complex terrain and steer flexibly.. Superior SteelOGRC SCX24 CVD shaft is made of steel material, high working reliability, ensuring maximum durability and for long time service life.. Easy to InstallPerfect fitting SCX24 front axles, precision machining, non destructive installation, simple operation.. Customer ServiceIf you are not 100 completely satisfied with our products, please do not hesitate to contact us.

CNC aluminum machined, Black anodized, improves the overall performance.. Made of aluminum alloy and steel, anodized surface, front axle 54g1.94oz, rear axle 27.5g0.97oz.. New version Steering knuckle,5mm Widened for the axle. Front axle with servo mount,rear axle with upper link mount, diamond-cut diff cover. NOTE servo mount width is 23mmonly suit original servo , if use others servo , need change servo mount . Fit for SCX24 Series All RC Crawler.

V2 upgraded version of MEUS Racing ISO axles, suitable for Axial 124 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco. ISO V2 brings two key updates 1 Shoulder screws on steering knuckles to provide better fixment, won't easily fall off. 2 Modifed diff cover, screws can be hidden properly to prevent the axles from being jammed under certain circumstances. Front axle 83g and rear axle 32g, comes with brass steering knuckles and diff cover, aluminum servo mount and axle housing for overall protection and higher performance while conquering different terrains. US patented Patent No. US D1,052,393 S Isokinetic 3-section CVD effectivelyminimizes the jerks when turning at large angles and support max.52 steering angle. Front and rear equiped with customized 2-14T gears, by replacing the gears of rear axle to 2-16T gears, you can get 14 underdrive.

V2 upgraded version of MEUS Racing ISO axles, suitable for Axial 124 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco. ISO V2 brings two key updates 1 Shoulder screws on steering knuckles to provide better fixment, won't easily fall off. 2 Modifed diff cover, screws can be hidden properly to prevent the axles from being jammed under certain circumstances. Front axle 67g and rear axle 24g, comes with brass steering knuckles, aluminum servo mount and diff cover, and the axle housing is made of nylon material via injection molding, which provides better flexibility while conquering tough terrains. US patented Patent No. US D1,052,393 S Isokinetic 3-section CVD effectivelyminimizes the jerks when turning at large angles and support max.52 steering angle. We set 5mm extended in width at each side to the axles to get more clearance while steering thus allowing more tire selections. Front and rear equiped with customized 2-14T gears, by replacing the gears of rear axle to 2-16T gears, you can get 14 underdrive. Except for the diff cover, the accessories for the V2 nylon axles and V1 nylon axles are compatible The accessories for the V2 nylon axles and V2 metal axles are compatible.

Axial Driveshaft Set, Short XLong SCX24, AXI202000.

Compatible with Scale 124 AXIAL SCX24 Deadbolt AXI90081, Jeep AXI00001.C10, AXI00002.B-17, Betty AXI00004 SCX24 Gladiator AXI00005,SCX24 Bronco AXI00006 RC Crawler Truck Car. Made of Quality Brass, 7geach,add weight to the axle which lower the vehicles gravity, increase the stability.. CNC machined for precision.Increased strength and precision.Easy upgrade from the original part. Geart Value,Package include 2x Brass Boulder Bars Weights As shown.

Planet-Inspired Axle Design Planet-shaped differential housing for a highly realistic scale appearance. Seamless integration with the axle tubes enhances visual accuracy. 4mm axles increase the width of each side by 4mm, increase total length by 8mm. Brass Steering Knuckles Adds front axle weight for improved traction, better climbing capability, and enhanced steering response. Smooth, High-Angle Steering Performance 3-section CVD driveshaft design work to effectively minimize vibration and binding, enabling smooth operation and maximizing the steering angle up to approximately 52. Metal 216T Worm Gear Set Delivers smooth, consistent performance and exceptional durability on rugged terrain. Aluminum alloy axle housing CNC,anodized. Model Compatibility for Axial 124 SCX24.

The scx24 extended axle shaft compatible with Axial Scx24 AXI90081 AXI00001 AXI00002 124 rc crawler car.. The scx24 extended axles made of high quality steel material,for stronger use and smooth driving performance.. Each side extended 4mm.Extended length by 4mm to widen the wheel track in order to drive more stable and smooth.. Upgragde Part,great repalcement parts to upgrade your RC car, help to improve its performance.. Package includes 2Pcs front CVD joint and 2Pcs rear CVD joint and mounting accessories..

Suitable for Axial 124 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco.. Mullet setup comes with ISO V2 front axle and rear portal axle, default rear axle provides 25 underdriveslower than front axle, great for comp player to win more points at some tough terrains.. Front and rear equiped with 2-14T gears, front axle can swap to 2-12T, rear axle can swap to 2-12T2-16T to get different gear ratiofront axle overdrive according to players' need. Front axle 70g and rear axle 43g, comes with brass steering knuckles and diff cover, aluminum servo mount and axle housing for overall protection and higher performance while conquering different terrains.. US patented Patent No. US D1,052,393 S Isokinetic 3-section CVD effectivelyminimizes the jerks when turning at large angles and support max.52 steering angle. Due to the setup with reversed gear in front axle and rear portal axle, you need to reverse the motor wires or set the REV of throttle on your transmitter.

20pcs SCX24 Ball Bearings KitUpgrade your RC car This SCX24 Bearings Kit fits a range of Axial SCX24 RC Car 90081, Ford Chevrolet AXI00001, Wrangler AXI00002, AXI00004, Gladiator AXI00005, and Ford AXI00006.. SCX24 Axle Sealed Bearing KitSCX24 bearings are designed with special no-contact dual rubber seals, which help to seal out dirt while providing friction-free performance. The kit includes 20 rubber sealed bearings, making installation and replacement easy. Suits for SCX24 RC Crawler Car.. SCX24 Upgrade PartsEasy installation The SCX24 Wheel Hub Axle Sealed Bearing Kit comes with all the necessary hardware for quick and easy installation, so you can get back to enjoying your RC car in no time. Consider the 20PCS Steel Ball Bearing Set. Made of high-quality Bearing Steel, these deep groove ball bearings provide less friction, higher speeds, and increased durability.. SCX24 Axle Sealed Bearing KitEasy Installation Replacement. Durable construction Made from high-quality steel with rubber seals, these ball bearings are built to withstand the rigors of off-road driving and provide long-lasting durability.. inbox20pcs SCX24 Ball Bearings Kit. If you are not satisfied with our product received, you can apply for unconditional return and refund within 90 days. In terms of any problem of this product, you can send emails to us at any time. We will reply you as soon..

Fits Axial SCX24 Deadbolt AXI90081.C10 AXI00001.Jeep Wrangler AXI00002.B-17 Betty AXI00004.Jeep Gladiator AXI00005.Ford Bronco AXI00006. Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance.. Includes FrontRear Bridge2.Steering Knuckle2.Rod Tie Links1.Servo Mount1.Rear Links Mount1.Screws. Note This kit does not include gears, bearings and drive shafts.

The rc chassis armor compatible with Axial Scx24 AXI90081 AXI00001 AXI00002 124 rc crawler truck car. The scx24 skid plate guard made of quality stainless steel,durable in use.Package includes 1Pcs center gearbox skid plate guard and 2Pcs axle diff. guard.. It can effectively protect your RC car from scratch and abrasion, so that it will prevent damage to the center gearboxand drive shaft.. Lightweight upgrade to better protect your rc car, ensures the performance of your rc car.. Easy to install and upgrade from original parts..

Suitable for Axial SCX24 Deadbolt C10 JLU Gladiator Bronco 124 RC Crawler. This 4WS version comes with two front axles with steering structure, one axle equipped with brass steering knuckles while the other one equipped with aluminium knuckles. You will get a heavier front axle and four-wheel steering system for a better crawling performance. The axle with brass steering knuckles weights 74.8grams, the axle with aluminium steering knuckles weights 50grams. MEUS Racing patented 3-Section-CVD structure effectively minimize the wobbles of front wheels while cornering to level up the steering performance, further more, your little monster will get a max. 52steering angle which is nearly double as the stock axles 27 to explore more fun and possibilities with you. The axle housing is made of nylon material via injection molding, which provides better flexibility while conquering tough terrains. Diff gears, diff covers, servo mount and steering links are made of high quality aluminium alloy for greater durability, strength and stability to get the competence against fierce driving. We set 5mm extended in width at each side to the axles to get more clearance while steering thus allowing more tire selections..

Fit for124 RC Car Axial SCX24 Deadbolt Bronco JLU C10 Gladiator Chevrolet Base Camp Dodge Power Wagon. Crafted from durable aluminum alloy material, black anodized and fine workmanship, prevent corrosion, offer superior strength and longevity compared to stock plastic parts. The black hard coating of Aluminum Steering Link create a more precise steering assembly, ensure smooth operation of our rc car. Added a total length of 8mm, widened the wheel spacing, provides better stability and prevent rollover, improve overall performance. Precision-engineered for a seamless fit, simple installation, directly replaces stock parts, ensuring optimal performance.

Compatible With MOHERO SCX24 Complete Axles Set fits for 124 RC Car Axial SCX24 Deadbolt Bronco JLU C10 Gladiator Chevrolet Base Camp Dodge Power Wagon,etc. Better Performance The black hard coating of Aluminum Steering Link create a more precise steering assembly, ensure smooth operation of our rc car. Easy To Install Precision-engineered for a seamless fit, simple installation, directly replaces stock parts, ensuring optimal performance. Durable Crafted from durable aluminum alloy material, black anodized and fine workmanship, prevent corrosion, offer superior strength and longevity compared to stock plastic parts. Comes with steering knuckles, diff gears, diff covers, and steering links are made of high quality aluminium alloy for greater durability to get the competence against fierce driving.

Fits ForFront Rear Portal Axles 5mm Wider on Each SideUpgrades Part for 124 SCX24 C10 JLU Gladiator Bronco Deadbolt 124 RC Crawler,in a total width increase of 10 mm. For front and rear axles. Anodized Aluminum The Axles made of high quality anodized aluminum, strong and durable.The rc car upgrades parts highly increase the sturdy and precision.. Long-lasting Performance The rc car upgrades parts highly increase the strength and precision.. More DurableThe upgrades part is durable enough,improves the overall performance of the rc car.Specially designed strengthening cut-outs for increased crash resistance.. Easy to Installgreat for replace the old or broken part.Increase overall performance and durability of your RC car..

Premium Brass Construction Built from quality brass, these axles are wear-resistant, strong and durable, can use for a long time. Heavier, Weighted 124 Axle Design With a 72g front axle and a 46g rear axle, this set provides extra weight for improved traction and handling, enhancing overall RC performance. Direct Replacement for SCX24 Stock Axles Easy to install with no modifications required, its a straightforward upgrade for your SCX24 model. Compatible with 124 Axial SCX24 Models This axle set compatibility with various Axial SCX24 models, including AXI00001, AXI00002, AXI00005, AXI00006, and AXI90081 Deadbolt RC Crawler models. Available Options Choose from the Front Axle Kit, Rear Axle Kit, or a complete Front Rear Axle Set to suit your needs.

Compatible with Axial SCX24 AXI90081 124 RC Crawler Truck Car. Extended length by 4mm to widen the wheel track in order to drive more stable and smooth.. Package includes 4x Front and Rear Axle, 4x Nuts, 4x pins, 4x Screws, 4x O Rings, 4x Extended aluminum ring.. Made of high quality metal material, durable, anti-rust and wear-resistant.. 100 brand new and high quality,Easy to assemble and disassemble..

SCX24 Axles CNC Aluminum SCX24 axles CNC machined from aluminum with anodized finish. Lightweight Front Rear Axle set 94g built for durable Axial SCX24 RC crawler upgrades. 8mm Wide SCX24 Axles 8mm wide SCX24 axle design 4mm per side increases track width for improved stability and better control on rocks and uneven RC crawler terrain. 3-Section CVD Shafts 52 Steering 3-section CVD drive shafts reduce binding and vibration while delivering smooth power transfer with up to 52 steering angle. Brass Steering Knuckles Upgrade Brass steering knuckles add weight to the front axle, improving traction, climbing performance, and steering response for serious SCX24 crawler upgrades. Planetary Style Axle Housing Planetary style SCX24 axle housing offers realistic scale looks and integrates a durable 216T metal worm gear for smooth power delivery. Adjustable Rear Link Mount Rear axle includes an adjustable link mount bracket to increase link spacing and improve climbing performance and chassis stability.

Suitable for Axial 124 SCX24 C10 JLU Bronco Wrangler Gladiator Deadbolt B17. Made of high quality aluminum alloy, sturdy and durable. Portal design has 7mm ground clearance and portal gears provide 25 underdrive for better trafficability and stability. The front axle comes with thickened CVD shaft ioint, intergrated shoulder screws, greater and stabler crawling performance, increasing the steering angle to 45. Front and rear axles are widened by 6.2mm on each side to improve stability and climbing performance meanwhile the extended axles can prevent CVD from overloading.

Premium SCX24 upgrades for 124 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco.. Made of aluminum alloy and brass, anodized surface, front axle 85g3oz, rear axle 35g1.2oz.. US patented Patent No. US D1,052,393 S lsokinetic 3-section CVD ensures that there is no jerks when turning at large angles, 52 max. steering angle.. Front and rear equipped with customized 2-14T gears, by replacingm the gears of rear axle to 2-16T gears, you can get 14 underdrive.. Support high torque adjustable servo mount, adjustable height rear axle structure with upper link mount, diamond-cut diff cover..

Premium SCX24 upgrades for 124 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco.. Made of aluminum alloy and brass, anodized surface, front axle 85g3oz. US patented Patent No. US D1,052,393 S lsokinetic 3-section CVD ensures that there is no jerks when turning at large angles, 52 max. steering angle.. Support high torque adjustable servo mount, adjustable height rear axle structure with upper link mount, diamond-cut diff cover.. Package only includes front axle and accessory kit, not include rear axle.

This Spring Steel Universal Joint Drive Shaft is Compatible Axial AX24 SCX24 Deadbolt AXI90081, JLU AXI00002, C10 AXI00001, B-17 Betty AXI00004, SCX24 Gladiator AXI00005, Bronco AXI00006 RC Crawler, power wagon. RampCrab CVD front rear axle shafts made of hardened Spring steel material, better hardness. Sturdy and durable, easy to install.Easy to replace and durable in use. Universal joint axles allow up to 50 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.. Come with bearings nuts. What can you get 2 x Universal Joint Drive Shaft 2x Rear shaft for Axial SCX24 AX24 RC Car. Stock Axle length.

Fits for all 124th scale RC crawlers car Axial SCX24 Deadbolt JLU C10 Gladiator Chevrolet Bronco.... Made of aluminum and Steel gear,excellent workmanship and high precision,these axles are built to withstand the rigors of off-road driving.. Engineered to meet the exact specifications of the SCX24, ensuring a seamless installation and optimal performance.. This aluminum axles easy to replace original plastic axle or damaged axles,easy to install and move..

This Diff Gear Set upgrades for 124th Axial SCX24 Deadbolt AXI90081,Bronco,C10 ,Gladiator front or rear axle. Made of high quality Hardened Steel,Sturdy and Durable.. Increase overall performance and durability of your RC car. Easy upgrade from the original part, make your car look more realistic.. Package Includes 1set x Diff Gear Set.

Crafted from durable metal, QUE-T axles offer superior strength and longevity compared to stock plastic alternatives.. Precision-engineered for a seamless fit, they enhance your crawler's performance over rugged terrain.. Suit for 124 scale Axial SCX24 RC crawlerssuch as Gladiator, Deadbolt, JLU, C10.. Upgrade your rig with this essential set and experience enhanced off-road capabilities.. Easy to install and remove.

Compatible with The RC Front Axle Drive Shaft is replacement for Axial SCX24 AXI90081 AXI00001 AXI00002 124 RC cars. Stainless steel material The RC Front Axle Drive Shaft is made of high quality stainless steel material, strong and durable. Product Size Length Approx.31.5mm 1.2in, color silver. Package List 2 x Front Drive Shaft. RC car accessory The RC Front Axle Drive Shaft can replace the old or damaged parts to improve the overall performance of your remote control car.

Axial Rear Axle, Assembled SCX24, AXI31610.

This is MEUS Racing Isokinetic 3-Section CVD axle shaft, installed inside car axles for Axial SCX24 124 scale car models.. The Isokinetic 3-section CVD structure is designed for smooth transmission and reduces jerks while turning at large angle, providing better driveline system for RC car models.. The 3-section CVD axle shaft features the transmission component called universal joint coupling, the two shafts are connected via one U-shape buckle to get larger transmission angle for better flexibility and stability,. This 3-section structure is long-lasting to ensure longer service life of the whole car axles.. Only for MEUS RACING SCX24 Axles with Isokinetic 3-Section CVD Driveshaft..

Axial AXI31609 - SCX24 Front Axle, Assembled. Features. Includes 1 Assembled Front Axle. Specs. Part numbers included in factory packaging AXI31609.

Enhanced 6x6 Conversion Upgrade your SCX24 from a 4x4 to a 6x6 configuration. The extended scx24 LCG chassis significantly lowers the center of gravity, improving sidehill stability and reducing the risk of rollovers. Experience a remarkable 40 better passability in mud, approximately 30 improved obstacle crossing on rocks, and about 25 increased traction in sand, giving you unmatched capability on any trail. Magnetic Support BracketThe scx24 conversion kit features a convenient magnetic stand, ensuring easy installation and secure attachment of the scx24 chassis for stable performance during your adventures. Integrated Lighting System This scx24 body comes with pre-configured front headlights, roof top lights, and rear brake lights, ready to elevate your 124 RC crawler's scale appearance and nighttime running capability. Durable PC BodyConstructed from high-quality PC material, this scx24 upgrades enhance structural integrity and durability compared to standard ABS, providing exceptional performance in complex terrains and ensuring long-lasting use. Maximum Traction Stability The 4x4 to 6x6 upgrade provided by this scx24 6x6 kit extends the wheelbase, offering better support and weight distribution. Compatible With SCX24For Axial SCX24 BroncoC10Wrangler JLU CRCBasecamp.AXI00001 AXI00002 AXI00006 AXI-1532T1 AXI1219T2 RC Crawler.

Note Come with adjustable rear axle truss upper link mount. Only compatible with the SCX24 stock rear link mount and INJORA rear axle truss upper link mount SCX24-78.. Planet-Inspired Axle Design Planet-shaped differential housing, precisely CNC-machined for a highly realistic scale appearance. Seamless integration with the axle tubes enhances visual accuracy.. 4mm Width Per Side Adds a total of 8mm width to enhance stability while maintaining scale accuracy.. Double Joint Shaft Design Minimizes outer wheel vibration when turning at extreme angles.. Precision CNC Aluminum Steering Link Shortens the distance between the steering link and the axle housing, ensuring a compact and clean design without excessive protrusion.. Hardened Steel 216T Worm Gear Set Made from aerospace-grade 20CrMnTi hardened steel for smooth, consistent performance and exceptional durability on tough terrain.. Brass Steering Knuckles Adds front axle weight for improved traction, better climbing capability, and enhanced steering response..

Brand ProductEmax ES08MAII 12g analog servo, high sensitivity, stable and low-noise.. Excellent Performance High precise metal gear, with better accuracy and longer service life.. Servo UpgradesUpgraded high torque analog scx24 emax servo, large steering angle. React quickly and accurately.. Perfect CombinationThis scx24 servo is equipped with metal mount and servo horn, replaces the original plastic accessories.. Application ScopePerfect for Axial scx24 Gladiator Bronco C10 JLU Deadbolt B17 or RC Helicopters, small robots, and other models..

The Upgrades Brass Wheel Weights Compatible with Axial SCX24 Deadbolt AXI90081, AXI00001 C10, JLU AXI00002 , B-17 Betty AXI00004, Gladiator AXI00005,Bronco AXI00006 124 RC Crawler Truck Car.. The Upgrades Wheel Adapter About 13g 0.46 Oz per one, fitted to the wheels to lower the vehicles center of gravity,increase its stability.7mm hex matching stock wheel hub. This RC upgrades parts made of solid brass.CNC machined for precision,Stable in performance, not easy to oxidize and rust.. The Brass Extended Wheel Weights Hex Adapter can extending the track width for a wider stance and greater control and stability.. Package Included4 x 13g 0.46 Oz Hex Wheel Weight Hubs,4 x Pins,4 x Nuts.Easy installation and upgrade..

Advanced SCX24 Differential Gear Achieve a 50 speed increase with differential gears, while the scx24 bevel gear design ensures higher transmission efficiency,allowing faster speeds on flat terrain and reducing the risk of rollovers, making your driving experience more enjoyable. 10 MM Extended Axles Upgraded scx24 front and rear axles with 10 mm extended design increase tires spacing and improve stability,prevent rollovers on rugged terrain. They also provide compatibility with a wider range of tire options. Enhanced Ground Clearance Engineered with an additional 10 mm of ground clearance compared to standard models, our scx24 portal axles provide excellent clearance for navigating rough and uneven terrains with ease. Weights Brass Wheel Hex Precision-machined brass wheel hex hubs reduce the center of gravity, enhance scx24 chassis stability, and optimize overall weight distribution for improved your scx24 crawling performance. All Metal Structure Axles Constructed from aluminum alloy with CNC machining, our metal scx24 extended axles deliver outstanding wear resistance and durability, guaranteeing performance even under the most demanding conditions. Compatible With SCX24Axial SCX24 BroncoC10DeadboltWrangler JLU CRCJT GladiatorGX470Basecamp.AXI90081 AXI00001 AXI00002 AXI00005 AXI00006 AXI-1532T1 AXI1219T2 RC Crawler.

COMPATIBLE FOR SCX24 AXLESThe Original Straight Steering Axles are suitable for 124 SCX24 AX24 Deadbolt JLU C10 Bronco Gladiator Axial 124 RC Crawler. Ideal plastic assembled portal axle replacement for AXI31609.. EXCELLENT FRONT REAR AXLES SETThis RC axles are assembled and lightweight, ideal replacement for old or damaged stock scx24 axles. Easy and convenient to install.. HIGH QUALITY MATERIALFront axle 20.8grams, rear axle 15.0grams, the axle housing is made of plastic material, which is light weight and provides better flexibility while conquering tough terrains.. BEST CHOICE OF YOUR AXIAL 124 CRAWLEROur Axles equipped with 16T worm gear set. Please note our SCX24 is totally same as stock axles, not upgraded.. GREAT SERVICE FOR YOUWe put a lot of effort into manufacturing quality products to meet our customers expectations. We stand behind every RC vehicle parts that we make, if you run into any trouble with our item, contact us please, we will service you 24 hours a day until you are satisfied..

CNC machined billet aluminum axle housing and tubes, anodized black.. Easy to install and Replaces factory plastic axle case housing and diff cover.. Nice parts that can upgrade your remote control car and help improve its performance. Direct fit hop up requires no vehicle modification for use.. Packing INCLUDED 1x front rear axle housing kit 1 x screw set 1 x wrenches.

Wide compatibility these replacement parts are compatible with Axial SCX24 Deadbolt, AXI90081Jeep, AXI00001 C10, AXI00004. What you get you will receive 2 pieces of brass steering knuckles, and 4 pieces of screws, 4 pieces of bushing sleeves and 1 piece of small wrench alone with 4 pieces of 2g brass hex hubs, 4 pieces of pins and 4 pieces of nuts, a nice combination set to meet your need. Quality material this kit is made of quality solid brass, wear-resistant, strong and durable, can use for a long time. Practical function the 7 mm wheel hex hubs can be applied to extend the track width 5 mm ea. for a wider stance and nice control They can also increase the weight of the axle to lower the gravity of the vehicles for strong stability. Easy to install comes with accurate design, easy and convenient to install, direct replacement for the plastic one These steering knuckle counter weights are useful accessories for RC crawler car.

Compatibility - Suitable for 124 Axial SCX24 AXI90081 RC crawler car accessories Please confirm your RC Car model before purchasing. Aluminum Alloy Material - Brand new and high quality. Made of high quality aluminum alloy material , which is sturdy, durable, wear resistant and has good performance. Innovative Design - High precision machining, stable and reliable. Strong metal alloy for maximum performance. Increase overall performance and durability of your RC car. Pefect Spare Parts - Nice spare parts to upgrade and modify your model cars. Replacement the original damaged parts, ensures long lifetime and better work performance. Easy and convenient to install and remove. Satisfaction Guarantee - If you are not 100 satisfied with our products for any reason, please feel free to contact us any time, we will solve the problem for you within 24 hours.

Compatible with AXIAL SCX24 Deadbolt AXI90081, Jeep AXI00001.C10, AXI00002.B-17, Betty AXI00004, 124 RC Crawler Truck Car. The Wheel Hubs Made of Quality Brass, 0.8g each,Add weight to the axle which lower the vehicles gravity, increase the stability.. CNC machined for precision.Increased strength and precision.Easy upgrade from the original part. Geart Value,Package include Wheel hubs4, Pins4, locknuts4. 100 New,Genuine HobbyPark RC Products,Exquisite workmanship Durable.Buy with Confidence,Friendly Customer Service.

Outstanding AppearanceCNC aluminum machined, Black anodized, improves the overall performance.. Unique DesignsAdds 4mm to the track width on each side of the vehicle. This helps to increase stability over rough terrain, as well as increase steering clearance to allow a wider selection of tire options.. New UpgradesThe INJORA 4mm extended axle equipped with 13TFront 16TRear worm gear set. Compared with original SCX24 16T, 13T overdrive gears increase speed about 23.. Well PerformanceOverdrive the front will pull your scx24 crawler car faster in the front, it allows you to climb better and reduce rollover. Also have a stronger drag break effect goind downhill.. Applicable ModelsSuit For Axial SCX24 all series, Deadbolt JLU C10 Gladiator Bronco. High Compatibility, compatible not only with stock SCX24 and EMAX servo mounts, but also with stock Axial or INJORA overdrive gear sets..

This metal axle housing set is for 124 rc crawler car Axial SCX24.. Color Black housing. Made of high quality Aluminum Alloy.. Sturdy and durable. Easy to install. It makes your model car more reasonable, and more interesting to refit.. Package Included 1pcs front axle housing, 1pcs rear axle housing..

Complete Aluminum Alloy Rear Axle for Axial SCX24 Deadbolt AXI90081.Jeep AXI00001.C10 AXI00002.B-17 Betty AXI00004. MaterialMachined from CNC Aluminum and Anodized for Good Looks Directly Replace Original Plastic Axles.. Enhances SCX24 RC Crawler Car Performance in Handling and Durability, Providing Unmatched Driving Versatility.. Advantage Fine workmanship and perfect style, Easy to install and remove, fit to the car axle perfectly.. Customer service If you have any question,please contact us and we will offer professional service to solve your problem..

Black coating finish to prevent oxidation. Extending the track width for a wider stance and greater control and stability. CNC machined high quality brass material. Precise dimension control to perfect fitting to Axial SCX24. Excellent looks.

One peice of CNC machined, easy to install and more durable. Precision dimension control, perfect fitting of the central gear.. High quality aluminum 7075 material. Great replacement to the plastic part. Fantastic looking, perfect for Betty.