EASY TO READ Clear marks on the metal tip promise easy-to-read oil levels.. Replace part number 9336 , 8863B , 9336A, 917327,917-327 For 42RLE, NAG1, 45RFE, 62TE Transmission.. USING Insert dipstick into transmission fill tube until the tool bottoms out and then pull out, read fluid level. Don't stay dipstick in the car. DO NOT leave tool inside the dip stick tube when finished with level check.. Dipstick SizeTotal length 52.8 in, Entry length excluding handle length50.8 in. WHAT YOU'LL GET 1x dipstick1x manual instructions.

Work for GM 700-R4, 4L60, 4L60-E, 4L65E and 4L70E Transmissions.. A perfect replacement to Atec Trans-Tool T-1503, Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long T-1574-M.. Protect the Stator or Turbine Shaft Teflon seals from damage. Can be used to adjust and install the seal, prevent damaged and deformed during installation.. Made of high quality aluminum material, Sturdy hard. Resistance and anti-corrosion for a long using life.. Package1Turbine Shaft Teflon Seal Tool. If you have any questions, contact to us and got an ideal solution within 24 hours. With a 6 month warranty..

CR-MO alloy steel for long life. Lifetime warranty. Will help in a lot of your automotive needs. 12 inch drive. 36 inches deep.

FITMENT This clutch alignment tool compatible with Polaris GeneralRZRRanger XP 1000 2016-2024. Please check the year and model of your vehicle before purchasing to make sure it matches. APPLICATION This polaris clutch tool is used to accurately calibrate the alignment between engine clutches to ensure efficient power transmission, reduce belt wear, extend belt life and optimize vehicle performance. It can also be used to remove bolts or brackets that hold the engine and transmission together. HIGH QUALITY MATERIALS The alignment tool is made of high-quality aluminum, lightweight, rust-resistant, long-lasting, non-abrasive and very firm in use. It is also precision machined to ensure superb accuracy. EASY INSTALLATION Remove the clutch and install one end of the clutch alignment tool larger hole onto the secondary clutch shaft center and extend it to the crankshaft for alignment. Simple and efficient. REPLACEMENT This crankshaft spacing tool is made to original factory specifications and is a perfect match for the original car, replacing old or damaged tool.

NO DAMAGE Use this oil pan separator tool, you needn't using a screwdriver or gasket scraper to cutting, was able to get almost all the way around oil pan without having to remove surrounding components It keeps from having to pry off oil pans and possibly bending them. this tool didn't damage the oil pan, so can reuse the oil pan without buying a new one. USEFUL TOOL This gasket remover tool works great at cutting RTV sealant on oil pans if you couldnt get the transmission pan off, a few taps of a hammer with this tool, the oil pan will came off with minimal effort, it's the perfect tool to remove transmission oil pan. SPECIAL DESIGNThis oil pan separator three sides are very thin opening, works great at cutting RTV sealant on oil pans Fits into tighter spots than a putty knife can tapered design which make hit the tool sideways along the pan it would be breeze. PREMIUM MATERIAL This oil separator automotive is made of high hardness AISI 1045 medium carbon steel, heat-treated, sturdy and stability, corrosion resistant, wear resistant, with reliable use and long service life. AFTER-SALES DESCRIPTION If you have any questions about the purchased tool, please contact us in time, customers satisfaction is our top priority.

UNIVERSAL SIZING This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job.. COMPLETE SET The discs sizes range from 18mm 0.7 inches all the way to 65mm 2.51 inches in 1mm increments plus 74mm 2.91 inches. All discs are connected with a 12mm 0.47 inches shaft and screw which quickly connects to a 180mm 7.08 inch handle, making for a complete and effective wheel bearing driver set.. EASY OPERATION This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally.. HEAVY-DUTY DURABILITY With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use.. PROTECTIVE CARRYING CASE Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Features This rear clutch spring compressor transmission tool is specially designed to remove the low reverse clutch piston in the rear of the case, allows you easily and properly remove the clutch spring retainer easy Comparable to T-0151 both in quality and functions. Premium Material The clutch spring compressor tool is made of high-quality steel, sturdy, strong and stable, rustproof, not easy to deform. Universal Fit The low and reverse spring compressor tool is applicable for GM 250 250C 350 350C 700R4 4L60 4L60-E 4L65E 4L70 4L70E 4T80-E transmissions. Easy to Use This spring compressor engages the lugs, can push the piston return spring enough to access the snap ring The whole process takes just a few minutes. Service Assurance If you are unhappy for any reason or there is some problem with our products, you can get help from us Customer satisfaction is our top priority.

PRODUCT SIZEThis clutch motor electromechanical unit unlock tool is 38DR. X 14RIBS .. EASY TO USEInsert the clutch unlocking tool, turn counterdockwise to release the lock on the clutch until the clutch is completely open. Easy, and useful.. WIDE APPLICATIONThis dry dual clutch electromechanical unit unlock tool compatible with Ford 6 speed dry dual clutch DPS6 transmission B-MAX, Ecosport, Fiesta, Focus, TransitTourneo Connect, Focus PS.. PREMIUM MATERIALThis clutch motor unlocking tool is made of high hardness carbon steel, heat-treated, sturdy and steady, corrosion resistant, wear resistant, with reliable use and long service life.. AFTER-SALES DESCRIPTIONIf you have any questions about the purchased tool, please contact us in time, and your problems will be solved in time..

Wide Application For use on universal transmissions and will fit most common clutch drums up to 6 in size. Compatible with Chrysler, GM, Turbo, also fits for Ford. To check more applicable models, please refer to the description below.. Great Function Removing the snap ring on a transmission clutch may be tricky. The tool is designed to relieve the pressure off the snap ring by compressing the return spring, allowing easy removal and installation of the snap spring. It will be very helpful for your work. Attention Does not do rear case pistons. Considerate Design 6 long legs especially designed for deep drums. Similar to Atec Trans-Tool T-0158-HD. Mounts to work bench or table or on a bench vise.. Qualified Essential Tool Made of premium and wear resistance steel. Higher strength, better corrosion resistance and welding performance. Provide you with long-lasting service and pleased experience on manipulation.. Service Assurance If you are unhappy for any reason or there is some problem with our products, you can get help from us Customer satisfaction is our top priority.

Complete Transmission Service KitIncludes all 4 essential tools for draining old fluid, filling new ATF fluid, and removing or installing screws. No more searching for individual adapters everything you need for a full transmission oil change on Mercedes 9GTronic models. Durable Zinc Alloy Aluminum ConstructionZinc alloy adapters provide a secure, wearresistant fit. Aluminum components are gentler on transmission threads and housings, reducing damage risk. All tools resist corrosion and hightorque use. Professional quality you can feel. Set Includes8mm oil pan spanner, fluid drain tool, M12 x 1.5 ATF fill adapter, special 9G-tronic ATF fill adapter. The deliveried M12 x 1.5 ATF fill adapter is compatible with Mercedes-Benz 722.9. The set also includes a convenient case for easy carrying and storage. Broad CompatibilityThis special ATF fill adapter set is compatible with Mercedes-Benz New C-Class, E-Class, S-Class, GLC, GLE, GLS fitted with 9-speed 9G-Tronic transmission type 725.0xx. OEM Equivalent Part Number 725 289 22 90 00, 725 589 00 09 00, 725 589 02 90 00. More ApplicationsThis transmission fill tool also compatible with NissanInfiniti, which use the 9G-Tronic transmission in some longitudinal front-engine RWD4WD models. It is compatible with Nissan Z RZ34, Nissan Frontier D41, Nissan Titan, Infiniti QX80.

Engine transmissions oil pan separatoravailable for removes worn sealants on oil pan, cylinder head cover, transmission pan, differential covers and other sealant joints.Suitable for use on most vehicles.. The engine transmission oil separator has a metal blade that breaks the gasket seal at the engine pump, transmission or any gasket connection that is difficult to separate.. For sealants that are difficult to remove, you can use a hammer to tap the metal block of the link blade to more easily complete the separation.Use engine transmissions oil pan separator to save time and worry less.. The engine transmission oil pan separator has a removable design, so if the cutter head is damaged, you can just change the cutter head to save money. And it is equipped with an Allen wrench.. Product SizeBlade width1-78 48mmLength3-18 78mm..

Fix Transmission Shudder Engineered specifically for the Ford PowerShift DPS6 6-speed dry dual-clutch system. This reset tool is the professional solution for fixing shifting issues after clutch replacement or actuator service. Compatible with 2012-2018 Ford Focus, 2011-2019 Ford Fiesta, 2019 Transit Connect, and 2012-Present B-MAX.. Essential Actuator Reset When the dual clutch is removed or installed, the internal spring mechanism must be reset to its factory unlocked state. Our 6DCT250 reset tool allows you to manually release and reset the clutch actuator with precision, ensuring the TCM Transmission Control Module can perform the relearn procedure correctly.. Precision 14-Spline Design Features a high-tolerance 14-spline socket that fits perfectly into the actuator's internal gear, preventing stripped splines or costly damage to the transmission components. The standard 38 drive interface integrates seamlessly with your existing ratchets and torque wrenches for a smooth DIY experience.. Heavy-Duty OEM Grade Forged from high-strength SCM440 steel with a corrosion-resistant black oxide finish. This tool is built to withstand the high torque required for resetting the internal springs. An affordable, professional-grade alternative to the expensive dealership tool 307-676, designed for lifelong reliability in your toolbox.. 1-Year Warranty Protection Your purchase is backed by the Yinlowa commitment to quality. We offer a comprehensive 1-Year Warranty on this DPS6 Clutch Actuator Tool. If you encounter any compatibility issues or manufacturing defects within 12 months, our US-based support team will provide a hassle-free replacement or refund..

High Quality This oil pan separator tool is made of high quality material and heat treated for superior strength, long-term durability and reliability.. Nut Removal Design The engine transmission oil pan separator has a nut removable design, can replace cutter head.. Function Cutting RTV sealant on oil pans easily with our oil gasket remover cutter tool. You can use a hammer to tap the metal block of the link blade to more easily complete the separation.. Easy To Use You don't need use a screwdriver or gasket scraper by using this gasket remover tool, fit for most vehicles.. Package Included 1 pcs oil pan separator tool, same as the pictures. if you have any problems, please feel free to contact us.

Precise Transmission Reset Solution Engineered specifically for Ford DPS6 6DCT250 dual-clutch transmissions. This reset tool allows you to manually unlock and release the clutch actuator motor electromechanical unit, helping clear trouble codes like P0902 and restoring smooth shifting performance.. Wide Vehicle Compatibility Perfect fit for Ford models equipped with 6-speed dry dual-clutch systems Compatible with 2012-2018 Ford Focus, 2011-2019 Ford Fiesta, 2019 Ford Transit Connect, and 2012-Present Ford B-MAX. A must-have tool for DIY repairs and professional mechanics alike.. Exact OEM Specifications Featuring a precision-machined 6mm diameter with a 14-tooth 14 spline socket design and a standard 14 drive. This tool functions exactly like the original 307-677 KL-0500-8011 factory tool, ensuring a snug fit without slipping or damaging the actuator.. Heavy-Duty Professional Quality Constructed from high-strength carbon steel with a corrosion-resistant metallic finish. Built to withstand high torque during the reset process, this tool offers long-lasting durability and reliability for repeated use in demanding automotive environments.. Save Time Professional Support Fix transmission shuddering or gear jumping issues from your own garage and save hundreds in dealership labor costs. We provide professional technical guidance for your repair project includes a 1-Year Warranty for complete peace of mind..

MAIN USAGExtended Length Transmission Lip Seal Installer Protector. MAIN PARAMETERMachined from Metal,Has .016 and .035 high strength steel wire loops on each end. ADVANTAGEDesigned to prevent cutting or damaging of the delicate seals and o-rings , longer than Universal Transmission Lip Seal Installer Protector . COMPATIBILITYSimilar to SST-0015 Atec Trans-Tool T-0015 and Kent-Moore J-26744-A. CUSTOMER SERVICE Any question, please contact us by email or amazon message system, we will reply ASAP ..

MAIN USAGExtended Length Transmission Lip Seal Installer Protector. ADVANTAGEDesigned to prevent cutting or damaging of the delicate seals and o-rings. MAIN USAGUniversal Transmission Lip Seal Installer Protector.

Professional 10R8010L80 Transmission Tool This precision-engineered tool kit is specifically designed for Ford 10R80 and GM 10L80 transmissions, providing a safe and effective solution for piston compression and snap ring removal during clutch service and transmission repairs, far superior to makeshift methods. Wide Vehicle Compatibility Compatible with Ford F-150 2017-2023, Expedition 2018-2021, Mustang 2018-2021, Explorer 2020-2021, Ranger 2019-2021, and GM models equipped with 10R8010L80 transmissions. A reliable aftermarket solution for garages and home workshops. Efficient and Safe Operation Design Engineered to work seamlessly with standard foot presses or hydraulic presses, these tools simplify the removal of stubborn snap rings without requiring specialized equipment. This design minimizes the risk of component damage while improving workshop efficiency. Precision-Engineered for Accurate Fit High-quality plastic construction ensures accurate alignment and smooth operation during transmission disassembly, providing superior performance without risk of damage. Complete Service-Ready Kit This comprehensive 3-piece set includes all essential tools needed for transmission servicing, offering a complete solution for piston compression and clutch ring removal. Quality Assurance and Support Professional and sincere service with 12-month warranty coverage for quality-related issues, ensuring reliable performance and customer satisfaction.

Wide Application For use on universal transmissions and will fit most common clutch drums up to 6 in size. Compatible with Chrysler, GM, Turbo, also fits for Ford. To check more applicable models, please refer to the description below.. Great Function Removing the snap ring on a transmission clutch may be tricky. The tool is designed to relieve the pressure off the snap ring by compressing the return spring, allowing easy removal and installation of the snap spring. It will be very helpful for your work. Attention Does not do rear case pistons. Considerate Design 6 long legs especially designed for deep drums. Similar to Atec Trans-Tool T-0158-HD. Mounts to work bench or table or on a bench vise.. Qualified Essential Tool Made of premium and wear resistance steel. Higher strength, better corrosion resistance and welding performance. Provide you with long-lasting service and pleased experience on manipulation.. Satisfaction Guarantee If you're not satisfied with the product, simply return it in 30 days or get a replacement during 1 year warranty via our customer service. If your item is defective, incorrect, arrived damaged or any other problems, please contact us include pictures if possible and we will reply in 24 hours..

Note About Funnel Size - Please look at the 2ND picture before ordering. Will this funnel size work for your application Be aware, it will not hold an entire quart of fluid, and is better suited for smallmedium volume fluid changes. For most small to medium sized vehicles, this kit will be adequate for adding up to 5 quarts. If you plan to use this for larger applications 5 quarts, it may take a bit longer to add all that fluid.. Tired of parts store funnels that are too short to reach the fill plug Our transmission funnel kit includes a 4 foot flexible clear hose, long enough for any application. Tired of leaks Generic transmission funnels always leak at the joint. Franks transmission funnel features a tight, press on fit.. Perfect for cars and trucks with hard to reach transmission fill plugs, usually located sideways on the transmission.. Includes 8 oz. chemically resistant funnel that can be used with or without the hose attached. 38 ID, 12 OD clear flexible tubing, plastic hose splice, metal s-hook for hanging.. Made in USA.

Work Portability Portable 6-liter hand pump, using precision machining process, matching the hose with the tubes, light weight, easy to assemble and use. Simple to operate, suitable for carrying around to complete a variety of liquid extraction work.. Quick Extraction Vacuum and strong suction are generated by pumping the handle, which allows rapid evacuation of liquids from the unit. Upgraded aluminum pressure release plug is more durable and efficient. Additional epuiped a replacement rubber plug.. Multipe Tubes The 59 transparent main hose makes oil quality checking easier and three 41 extension tubes to meet different types of vehicles. Additional equipped with a 19 brake bleeding hose to change brake fluid.. Hominization Design Markings on the side of the tank make it easy to record the amount of oil removed. It has a spout for easy pouring of old oil. The extra wide base makes the tank more stable.. Application Applicable for vehicles, motorcycles, lawnmowers, boats, jet skis, etc. And extract different types of liquids, like engine oil, transmission fluid, coolant, and power steering fluid. Note Gasoline and fluids with high volatility, high corrosion, high alkalinity, and high temperature are FORBIDDEN to be used on the extractor..

Wide UseThis transmission gearbox dry dual clutch DPS6 transmission is compatible with Ford DSG 6-speed dual clutch DPS6-transmission.compatible with Ford following series Fiesta 2011-2019, Focus 2012-2018,Transit Connect 2019, B-MAX since 2012 ect. RuggedATNVIDSG's dry dual clutch electromechanical unit unlock tool is made of industrial-grade carbon steel through a 24-step process, heat-treated and cooled, and will not change its finish or functionality when stored in complex weather conditions, making it an excellent Electromechanical Unit Unlocking Tool.. Easy to operateThe entire process is done by simply inserting the tool and turning it counterclockwise until the clutch until the clutch is completely. Product SizeClutch Motor Electromechanical unit unlock tool is 14 teeth 6mm size and a 14 drive socket.Tip Please double check that our tool sizes are compatible with your needs before you buy.. Best Service For all products purchased from ATNVIDSG,If you have other problems, you are welcome to by email or QA, we will help you solve the problem within 24 hours, except holidays..

706PCS COMPLETE KIT SIZE NO.16 solid terminal 224pin224socket contacts, Includes 20-2pin12-3pin10-4pin8-6pin3-8pin3-12pin DT connectors, 1 removal tool, 33 sealing plugs. All kits are consistent with the picture, please refer to Figure 2.. PA66 NYLON 3-IN-1 PROTECTION WATERDUSTSHOCKHousings durable PA66 anti-agingimpact tin-bronze terminals anti-rustconductive. With sealing plugs, its waterproof, dustproof, shock-resistantno leakageloss after installation.. WIDE USE FOR VEHICLES MACHINERYWorks under hood enginetransmission, chassis, cab. Fits CarsTrucksBoatsMotorcyclesOff-roadEmergencyAgriMining equipment.. EASY WIRING 16-20 AWG Quick Operation Size NO.16 contacts 16-20 AWG wires connectors for fast connectdisconnect. Included removal tool simplifies terminal adjustment.. READY-TO-USE FOR HARNESS REPAIRSAll-in-one kitno extra parts needed. Perfect for pro mechanics or DIYers ready to use out of the box..

Wide ApplicationFits for GM 200, 200C, 200-4R, 250, 250-C, 350, 350-C, 375, 400 3L80, 425, 475 3L80-HD, 700-R4 4L60 4L60E, Powerglide Fits for Ford C4, C5, C6, AOD, AODE, AOD-EW 4R70W, E40D Fits for Chrysler 404 30TH, 413, 470 31TH, 727 36RH 37RH, 904 30RH, 998 31RH, 999 32RH.. High PerformanceThis 0033 removal tool is designed with adjustable jaws pump extractor, helps you easily, properly and quickly remove conventional type pumps without damage.. Direct ReplacementAlternative for Atec Trans-Tool T-0033 and for Kent-Moore J-45053 both in quality and functions. Meet or exceed the OEM specifications, directly replace and perfect fit.. Superior MaterialHeavy Duty Universal Transmission Front Pump Removal Tool is made from top quality carbon STEEL, high strength, prevent corrosion and rust, wear and impact resistance, sturdy and durable. High precision and hardness ensure long term reliable service.. 100 Satisfaction GuaranteeIf you're not satisfied with our 0033 Universal Transmission Front Pump Remover Heavy Duty Tool, simply return it for getting refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo.

Function 6-piece metal oil change tool transmission oil filling tool is used to drain and add automatic transmission fluid ATF, which can easily change the transmission oil, newly added hybrid models, newly added oil level inspection tool, suitable for Mercedes-Benz.. Application Suitable for Mercedes-Benz models equipped with 725 transmission in 2015 and later, also known as 9G-Tronic 725 289 00 9000, 725 28922 90 00, W725 589 03 90 00, 724 589 00 21 00 transmission.. More convenient than similar products This 6-piece set adds a transmission oil adapter for Mercedes-Benz 722.9 automatic transmission, newly added hybrid models, and a newly added oil level inspection tool. Step 1 Add oil gear, Step 2 Drain a small amount of oil, Step 3 Check the oil level, Step 4 Drain the old oil full flow. Design Designed to assist in a thorough oil change. Effectively solve the problem of oil change in automobile transmissions. As a connector for the ATF filling tool for the car oil pan. Compared with similar 3-piece products, our product is more convenient, saving your time and money.. Oil Level Inspection Tool An integrated oil level inspection tool is included, allowing for precise measurement and adjustment of transmission fluid levels, which is crucial for maintaining the health of the transmission.. Comprehensive Set The ZKTOOL 6PCS Metal Transmission Oil Filling Tool is a complete kit designed for efficient transmission oil filling and maintenance, specifically tailored for Benz 725.0 9-speed transmissions.. Durable Metal Construction Made from high-quality metal, the tools in this set are built to withstand the rigors of professional use, providing durability and reliability for repeated applications..

LONGER TUBESThe fluid transfer pump includes two extension hoses that can be connected for a reach of up to 23 and comes with tube caps that prevent fluid spillage. An additional 23 extension hose is included, which when connected, is sufficient to reach hard-to-reach locations.. DOUBLE-SEALED SECURITYOil extractor pump is made of strong and durable materials, with a double rubber ring design that creates an airtight seal, and a precision threaded design on the end of the tube that prevents any leakage.. QUICK CONNECTIONOil syringe with a lock buckle that can be inserted and disconnected with a gentle press, convenient and fast to extract the oil. It also comes with a spare buckle for replacement when the original is loose.. PRECISE MEASUREMENTThe capacity of the oil suction pump extractor is 200ccmonitor fluid levels accurately and know exactly when to stop pumping with the marked scale mL oz. on this oil extractor pump's transparent body.. WIDE APPLICATIONOil extractor pump suitable for various applications including boats, farm equipment, industrial gear boxes, motor bikes, and vehicles. Also ideal for brake master cylinders, oil filter housings, differentials, and gear boxes..

This tool helps with rebuilding For GM Front Pumps to make sure the Pump Cover is aligned with the Pump Body.. Our heavy duty all-metal Alignment Bands are constructed of Stainless Steel for accurate alignment and long life.. Simple to use, with a wing nut that allows fast adjustment.. Covers a wide range For GM Transmissions, and come ready to solve most of your Front Pump Alignment needs.. For use on these Transmissions 250, 250C, 350, 350-C, 375, 400, 3L80, 3L80-HD, 425, 475, 700-R4, 4L60, 4L60E and PowerGlide Transmissions..

Wide Application For use on the transmissions as below. Compatible with Ford C4, C5, C6, AOD, AOD-E, AOD-EW 4R70W, AXOD, AXOD-E AX45 AX4N. Also fits for Chrysler 904 30RH, 998 31RR, 999 32RH.. Great Function The tool is designed to securely hold, position and rotate small engines, transmissions, rear axle differentials and other components while youre working on them leaving both hands free for work. It can handle pieces weighing up to 250 lbs, offering 360 full degree of rotation with positive stops at 90 increments, which will be very helpful for your work.. Direct Replacement This tool is a perfect substitution for OTC 7020, replacement for Ford Motorcraft PN 307-003 T57L-500-B and Atec Trans-Tool T-0156-A, engineered and tested to meet or exceed original part standards and performance.. Superior Quality Made of premium and wear resistance steel, sturdy, impact resistance and anti-corrosion for providing much longer service time.. Satisfaction Guarantee If you're not satisfied with the product, simply return it in 30 days or get a replacement during 1 year warranty via our customer service. If your item is defective, incorrect, arrived damaged or any other problems, please contact us include pictures if possible and we will reply in 24 hours..

Fitment For Mercedes Benz models 2015 up years, with the 725 transmission, known as the 9G-Tronic transmission. OE NumberW725589029000W725589009000.. Function of Oil Drain Tool For draining and filling Automatic Transmission Fluid ATF. To assist in a complete transmission oil change. Solve the problem of oil change in automobile transmission.. Oil Drain Tool Set Comes with 4 pcs tool. The anti-drip wrench tool can prevent the oil spilling or dripping to your hands. The adjustable draining wrench tool can adjust the position and drain the oil thoroughly. The Oil filling adapter with gearbox refueling joint M121.5 can be install on the oil injection pump to fill oil.. Feature of Transmission Oil Filling Tool Adopting durable plastic and metal material, wear resistance and not easy to deform, ensure a longer service time.. Package 1 Set Oil Drain Tool Set, include 1x Anti Drip Wrench Tool, 1x Oil Drain Tool, 1x Oil Filling Adapter, 1x Gearbox Refueling Joint. Please check relevant video if use this kit in doubt..

Professional Tool Removing the snap ring on a transmission clutch may be tricky. The tool is designed to relieve the pressure off the snap ring by compressing the return spring, allowing easy removal and installation of the snap spring. It will be very helpful for your work.. Easy Operation Just simply install the clutch spring compressor in position, and turn the knob to place pressure on the spring cage until it gives you enough room to release the snap ring during repairs or overhaul, which saves your time and energy.. Sturdy and Durable Construction Made of A3 steel and galvanized metal legs, this compressor is sturdy and durable for long time use. And with coating rust-proof grease on the processed surface, the machine is free from rust. Due to this feature, it is easy for you to clean and maintenance.. Suitable for Many Cars This tool kit can apply pressure to the clutch drum's retaining washer to compress piston return springs, which can be used on most American cars and light trucks such as following cars Compatible with Crown Victoria, Town Car, Ranger and Focus.. Lightweight to Easy-Carry This clutch spring compressor only weighs 2.8lbs, so that you can carry it easily. And because of its compact frame, you can put it on your car in case you need it someday..

FimentSpecifically designed for Ford 10R80 family of transmissions,ensuring a perfect fit for your vehicle.. Easy Installation Follow the simple instructions to easily install the seals starting from the furthest end of the input shaft. This method minimizes conflicts with previously installed sealing rings. High Quality Made from tough plastic to prevent damage to the rings.. Perfect Fit These tools are designed to resize sealing rings on the input shaft of your For Ford 10R80 automatic transmission, ensuring a precise and secure fit every time.. Package Included3pcs Of Ring Resizers Tools..

MaterialBonbo Rear Clutch Spring Compressor is crafted from quality carbon steel, high strength, anti-wear, rust resistance, anti-oxidation, sturdy and durable.. ApplicationCompatible with GM 250, 250C, 350, 350C, 700R4, 4L60 4L60-E.. FunctionThis Clutch Spring Compressor Tool will remove the Low Reverse clutch piston in the rear of the case. Makes removing the clutch spring retainer easy.. Convenient to UseThis low and reverse spring compressor tool engages the lugs, can push the piston return spring enough to access the snap ring. The whole process takes just a few minutes.. 100 Satisfaction GuaranteeOur focus on products and customer services is 2nd to none. If you're not 100 satisfied with this T-0151Rear Clutch Spring Compressor, simply return it for a full refund in 30 days..

Great CompatibilityPerfectly fits for GM Transmissions 6L45 6L50 6L80 6L90 6T70 Gen 1 6T75 Gen 1, Works with F 124740-30K. Helps install the new switch diaphragms and seals at ease, no longer have to replace the TEHCM computersolenoids for bad pressure switches.. High PerformanceUsed to service broken pressure switches and maintain solenoid work properly, designed to quickly easily install the transmission laminate discs and seals to restore normal switch operation. Solves the bad shifting on 1st and 2nd gear.. Easy InstallationSuper slick install tool, pops the seals in place perfectly every time with very little effort. The Laminate Installation Tool included helps get that laminate disk in place. Note Required to install the pusher piston into the bore before pushing the seal into place.. Package Includes1 x Piston, 1 x Seal Plunger, 1 x Seal Installer, 1 x Laminate Installation Tool, 5 x Seals, 5 x Laminate Discs. This tool kit includes enough discs and seals to rebuild for one TEHCM unit. Works well and saves money. . 100 Satisfaction GuaranteeIf you're not satisfied with our Pressure Switch Repair Tools kit 124740-TL30, simply return it for getting refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo.

3L Pressure Reservoir Comes with a 3-liter pressure holder and built-in pressure gauge, letting one handle brake fluid replacement alone. It cuts maintenance time, suited for home users and seasoned workers relying on automotive tools and automotive fluid pump. Broad Vehicle Fit Includes 8 ATF adapters fitting specific car models for tight brake sealing, working with common vehicle brands. These adapters are compatible with transmission fill pump and transmission fluid transfer pump for multi-scenario servicing. Fluid Tolerant Body Made from high-strength plastic that resists brake fluid, and features a pressure relief piece to avoid over-pressurization and stop leaks. Its well-suited for pairing with liquid transfer pump and fluid transfer pump for a range of repair jobs. Easy Use Equipped with a quick-connect transparent hose and spanner, with simple stepsfill the holder, attach the adapter and apply pressure. See-through components track fluid movement and eliminate air buildup when using a transmission fluid kit. Transmission System Support Clears trapped air from transmission hydraulic systems to bring back smooth gear-shifting performance. The included adapters ensure tight, leak-free connections, making for efficient servicing work when used with a transmission pump.

Replacement Part 8863B, 9336, 9336A, 917-327 42RLE, NAG1, 45RFE, 62TE.. Compatible models 300C, Challenger, Charger, Magnum on 2.7 , 3.5 , 3.6 3.7 , 5.7 , 6.1 , 6.4 Engines. Compatible models 2002 - 2011 DODGE Caliber Nitro Charger Challenger Grand Caravan Magnum Avenger Trans Dipstick 2005-2011 Jeep Liberty Patriot Commander Compass Grand Cherokee Trans Dipstick 2006 - 2011 Chrysler 300 Pacifica Sebring Town Country Trans Dipstick 2009 - 2011 VOLKSWAGEN Routn Trans Dipstick 2.7, 3.5, 3.6, 3.7, 5.7, 6.1, 6.4 L.. MATERIAL the Dipstick is made of high flexible stainless steel and convenient plastic handle. Rust and Corrosion Resistant.. Package Includes 1 pc Transmission Fluid Dipstick 1x manual instructions.

PRODUCT COMPATIBILITYReplace for Part Number 3.1108G. The Transmission Mount Kit is Compatible with GM Cars and Trucks. Fit for All GM Rear Mount TH350 TH400 700R4 Transmissions Series Most Common.. PREMIUM PERFORMANCESoft running enough to absorb vibrations for street use yet rugged for racing use. It helps control torque on high performance vehicles, and maintains proper drive shaft angle to help prevent early wear and unexpected power train damage.. GREAT FEATURESThe Transmission Mount Kit is made of high-quality material, sturdy and durable with long service life. Resistant to under vehicle fluid oils, coolants and road contaminants. It can be easily installed, no need complicated tools, convenient using.. PACKAGE INCLUDESYou will receive 1Transmission Mount, 1Upper Preload Plate, 2Screws, 2Washers and 4Gaskets. 10 Pieces in total. All hardware included to simplify installation.. 100 SATISFACTION GUARANTEEWe are committed to providing excellent products and the best service for our customers. If you are not satisfied with the product, you can simply return it. We support a 30-day refund on return and a 12-month warranty..

APPLICATION Compatible with Atec T-0015 and for Kent-Moore J-26744-A. Used as an auxiliary tool to rebuild for TH400 transmission.. UPGRADE DESIGN Universal lip seal installer and remover, transmission tool will help you install and remove the lip seal on the transmission . It can protect precision seals and O-rings from being cut and damaged.. ADVANGE Has 0.016 and 0.035 high strength steel wire loops on each end. If you want to carry out reconstruction work, this tool is a good choice.. MATERIAL Made of high-quality aluminum and steel with anodized coating. Low density, high strength, good plasticity, excellent thermal conductivity, corrosion resistance..

HIGH QUALITY MATERIAL Magnetic oil drain plugs are made of high quality strong stainless steel aluminum and powerful magnets, high tensile strength, light weight, reusable, suitable for daily maintenance and oil change.. ENGAGEMENT PROTECTION This magnetic oil drain plug effectively attracts contaminants in the oil, especially metals smaller than 30 microns, which are too small to be filtered by the oil filter. It extends the life of the engine better.. NO LEAK This magnetic oil drain plug includes a copper compression washer that prevents oil leakage. The magnet will hold the collected metal firmly in place and is unaffected by temperature changes until the oil is changed.. COMPATIBLE This M12x1.25 magnetic oil drain pan plug is perfectly compatible with almost all vehicles with the same thread size. Ideal replacement for cars, boats, motorcycles and other vehicles. Please check your thread pitch before purchasing.. PACKAGE 1 x M12 x 1.25 stainless steel magnetic engine oil drain plug and 5 x copper washer drain plugs. If you have any questions about our products after you receive the goods, please contact us in time, we will reply you within 24 hours..

J-36418-C Turbine Shaft Teflon Seal InstallerResizer For GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70L 1982 - UP transmissions.. 1503 Stator Shaft Teflon Seal InstallerResizer Used on GM 700-R4, 4L60, 4L60-E, 4L65E and 4L70E transmissions.. Great Function This tool kit will effectively protect the Stator or Turbine Shaft Teflon seals from damage, tear and distortion during installation.. Direct Replacement 1503 Stator Shaft Teflon Seal InstallerResizer is alternative to Atec Trans-Tool T-1503, 39SS both in function and performance. J-36418-C Turbine Shaft Teflon Seal InstallerResizer is a perfect substitution for Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long and T-1574-M.. Superior Quality Made of premium and wear resistance aluminum alloy, sturdy, impact resistance and anti-corrosion for much longer service time. Won't easily crack or break like the cheap plastic ones.. Satisfaction Guarantee If you're not satisfied with the product, simply return it in 30 days or get a replacement during 1 year warranty via our customer service. If your item is defective, incorrect, arrived damaged or any other problems, please contact us include pictures if possible and we will reply in 24 hours..

Fitment for Chrysler 200 2011-2018, for Chrysler 300 2005-2016, for Chrysler Aspen 2009, for Chrysler Pacifica 2007-2008, for Chrysler Sebring 2007-2010, for Chrysler Town Country 2008-2016, for Dodge Avenger 2018-2014, for Dodge Caliber 2007, for Dodge Challenger 2008-2016 , for Dodge Charger 2006-2020, for Dodge Durango 2009-2013, for Dodge Grand Caravan 2008-2020, For Dodge Magnum 2005-2008, For Dodge Nitro 2007-2011, For Jeep Commander 2006-2010, For Jeep Grand Cherokee 2006-2020, For Jeep Liberty 2007-2012, For Ram ProMaster 150025003500 2014-2020. Please check for above for your Year, Make, Model, Engine to make sure this item fit for your car before you purchase.. Premium Durable Plastic Material Made of high-strength black plastic, featuring wear resistance, high temperature resistance and aging resistance. Not easy to crack, deform or fade under long-term engine bay high temperature and harsh driving conditions. Built to meet and exceed original equipment standards, ensures stable performance and ultra-long service life for daily use.. Leak-Proof Sealing Prevents Fluid Loss Good sealing provides tight, airtight fit for transmission fluid dipstick filler tube. Effectively prevents transmission fluid loss also keeps dust and dirt out of the transmission system, protecting internal components and extending transmission service life.. Direct Plug-In Installation Simply remove your old cap and plug this new top plug into the factory filler tube directly, no cutting, drilling or extra modification required.. Package included 1 pcs top plug transmission cap.

Compatibility This gearbox clutch motor electromechanical unit unlocking tool compatible with Ford DSG 6 speed dual clutch DPS6 transmission.. Applications This actuator reset tool compatible with Ford 2011-2019 Fiesta the transmission alignment removal tool compatible with 2012-2018 Focus the clutch actuator motor unlock reset tool compatible with 2019 Ford Transit Connect the dual clutch transmission remover tools compatible with since 2012 Ford B-MAX ect.. Material quality The transmission alignment removal tools is made of high quality carbon steel, the electromechanical unit unlock tool has been heat-treated to provide corrosion and abrasion resistance to ensure long-term use.. Product specifications This dual clutch transmission clutch motor electromechanical unit unlock tool measures 14 teeth 6mm and comes with a 14 socket.. Easy to use The entire process involves simply inserting the clutch release tool and turning it counterclockwise to release the lock on the clutch until the clutch is fully open. Package includes 1pc dual clutch gearbox clutch motor electromechanical unit unlocking tool..

ApplicationThis professional tool is designed for various common clutch drums up to 6 in size. It's widely applicable for transmission repair for Chrysler, GM, Turbo and for Ford models.. Special Design - Adjustable for most transmission types, Similar to Atec Trans-Tool T-0158-HD.. Feature - Clutch Drum Spring Compressor, Long legs for deep drums, Mounts on work bench or vise.. High Quality - Made of superior material steel which have an unparalleled lifespan with great durability.. Adjustable Design Enhances VersatilityThe innovative adjustable feature allows adaptation to various transmission types. Its universal design makes it an ideal choice for both repair shops and DIY enthusiasts..

Reinforced Design The short throw shifter is to fix shift lever and make it safer during driving.. Fitment for Honda Civic 1988-2000, for Honda CRX 1988-1991, for Honda Civic 1993-1997, for Acura Integra 1991-1996. Note Not for Honda Civic Sedan Series after 1995, and not for Honda Civic Hatchback Series.. Installation Simply remove your existing gear knob, screw on the new short throw shifter and then reinstall the gear knob. For manual transmission car ONLY.. Good Quality Made of good quality material of aluminum alloy, durable for your car.. Package Include 1 x Short Throw Shifter, 2 x Accessories. NOTE Please confirm the thread size of your shift knob lever before purchasing. Maximum Pressure 5 MPa 50KG..

FITMENTFor Ford 10R80 Transmission Removal Kit.Compatible with Ford F-150 2017-2023Expedition 2018-2021Mustang 2018-2021Explorer 2020-2021Ranger 2019-2021 and the universal model equipped with a 10R8010L80 gearbox. FUNCTIONMakes the job of removing snap rings easier through foot press or hydraulic press.. MATERIALMade of high-quality PLA material, it can withstand repeated use and is durable. INSTALLATIONEasy to install, 3-piece set includes all basic tools required for transmission maintenance, allowing users to replace them themselves. AFTER SALEIf you encounter any problems during the use, please contact us..

COMPATIBLE WITH -Transmission Shifter Seal Removal Tool,Shift Selector Shaft Seal Remover Installer Transmission Tool Compatible with Dodge Plymouth Chrysler 727 and 904 transmissions.For use on these Transmissions 727 36RH 37RH, 904, 46RE RH, 47RE RH, 48RE RH. APPLICABLE SCENARIO - This is a seal remover and install tool,Shift Selector Shaft Seal Remover Installer Provides the easy removal and installation of the manual shaft shift lever seal. Draining of the transmission fluid is not required.. SIMPLE REMOVE - To remove the seal 1. Disconnect selector shaft linkage. 2. Place remover over the shaft with the remover screw backed off. 3. Apply downward pressure while screwing clockwise into the seal. once the remover threads are engage into the seal, remove the seal by turning the remover screw until seal is extracted.. SIMPLE INSTALLATION - To replace the seal 1. Place the new seal on the selector shaft. 2. Place installer over end of selector shaft. 3. Apply downward pressure by tapping with a hammer. 4. Remove the installer. 5. Connect the selector shaft linkage.. PACKAGE INCLUDED- Transmission Shifter Seal Removal Tool.Please verify before purchasing that it is the part you need..

HIGH-CAPACITY TRANSFER - This 200cc fluid extractor pump effectively removes and fills brake fluid, gear oil, antifreeze, and power steering fluid with precise control, making routine maintenance and fluid changes cleaner and more efficient. EXTENDED REACH ACCESS - Includes a 7-inch tube extension and 7.5-inch clear tube that access deep reservoirs and small openings, ideal for brake master cylinders and hard-to-reach fill points in tight engine bays. LEAK-PROOF DESIGN - Features double-seal plunger design with quick-connect hose fittings and a locking end cap that prevents spills, ensuring mess-free operation during critical fluid transfers and sensitive system servicing. HEAVY-DUTY CONSTRUCTION - Built with robust materials that withstand automotive chemicals and repeated use, this manual suction pump delivers long-lasting durability for professional workshops and DIY garage applications. PRECISION VOLUME CONTROL - The 200ml7oz translucent cylinder allows accurate fluid measurement during extraction and filling, providing controlled dispensing for brake bleeding, coolant replacement, and other precision fluid tasks.

Condition Well packed. 722.6 Transmission Fluid Dipstick Tool Replaces Part Numbers 1405891521, 140589152100, 917-321, 120-0721. Fit for type 722.6 transmission, 260E 300CE 400E C230 C240 C280 C32 AMG C320 C43 AMG CL500 CLK320 CLK55 AMG E300 E320 E420 E430 E55 AMG ML320 ML430 S320 S420 S430 S500 S600 SL320 SL500 SL600 SLK230 SLK32 AMG. Package Includes1x Transmission Fluid Dipstick. Total Length 1220 mm Length of the tool Approx.48 inch. Installation Reminder Please install the product according to professional requirements after receiving the item.

Universal Fit for Most Vehicles Includes 5 transmission and transaxle plugs designed to seal fluid systems on most import and domestic cars, trucks, and SUVs.. Leak Prevention During Transport Storage Effectively seals openings to prevent transmission fluid leaks while a vehicle is in transit or undergoing service.. Precision Stepped Design Features a stepped plug profile that ensures secure retention and a tight, leak-resistant seal in a variety of transmission housings.. Ford-Specific Compatibility Includes a side gear centering pin specifically for Ford transaxles, ensuring proper alignment and sealing during maintenance.. Covers Multiple Sizes Set includes sizes from 1 to 2.18 25.4 mm 55.37 mm and a Ford adapter, offering broad compatibility across vehicle makes and models.

Durable Material Comfortable Grip Constructed from high-strength, rustproof steel with excellent heat resistance, this transmission dipstick is built to last. It is sturdy and firm, not easy to break or deform, ensuring reliable performance over time. The ergonomically designed handle offers a comfortable touch for easy insertion and removal.. Accurate Fluid Measurement Engine Protection This essential tool helps you accurately measure your car's transmission fluid level. By regularly checking the oil quality and level with this dipstick, you can prevent transmission overheating caused by dirty or low CVT fluid, effectively prolonging the service life of your transmission. It's a crucial part of routine maintenance.. Wide Compatibility OEM Replacement Designed to replace OEM part number 31086-JA00A, this dipstick is a perfect fit for numerous Nissan models, including Altima, Rogue, Maxima, and more. Its universal size 23.77 x 1.19 x 0.78 inches also makes it a suitable immersion measuring tool for many other vehicles, allowing you to monitor oil level with ease.. Simple Clear Measurement Process To use, start the engine and warm the transmission fluid to operating temperature approx. 80. With the engine running, push the dipstick fully into the filler tube until the base seats. Then, pull it out to read the fluid level. The oil level is normal when it falls between the scale marks on the indicator.. Package Contents Important Note Your purchase includes 1 x transmission dipstick. Crucial Do not leave the dipstick in the dipstick tube after measurement. Prolonged exposure to CVT oil vapor can cause corrosion and damage, and it poses a risk of falling inside the transmission. Remember to remove it after each use. If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays..

High-quality Materials The air extraction pump is made of high-quality materials and is durable. There are no usage restrictions on the air pump, so you can buy it with confidence. The extraction pump will be carefully packaged to ensure the integrity of the extraction pump during shipping.. Easy to Install The air pump can be used directly without assembly, which will save you more time. If the internal pull-out tube fails, it can be replaced directly with the supplied thin tube. The pull-out portion of the pump has a rounded base that fits in the user's palm for easy gripping.. Pull-out Design The air extraction pump is a manual air extraction type, which does not consume energy and can be used directly. The extraction pump adopts a double rubber ring design and is equipped with a valve at the tail to transport materials conveniently and quickly. There are some small holes on the bottom of the air pump that can be connected directly to the corresponding ports.. Wide Range of Applications The extraction pump is a universal automotive accessory that is suitable for various types of vehicles, such as cars, SUVs, trucks, etc. Extraction pumps can also be used for other purposes, such as maintenance of large equipment. The air pump is small and can be conveniently stored directly in the car repair tool box.. Package Included After purchase, you will receive 1 air extraction pump, 2 replacement tubes, 2 rubber rings and 1 connector. If there is a shortage of parts in the package, please send an email promptly to explain the situation so that we can quickly help you solve the problem..

Professional Tool Removing the snap ring on a transmission clutch may be tricky. The tool is designed to relieve the pressure off the snap ring by compressing the return spring, allowing easy removal and installation of the snap spring. It will be very helpful for your work.. Sturdy and Durable Construction Made of A3 steel and galvanized metal legs, this compressor is sturdy and durable for long time use. And with coating rust-proof grease on the processed surface, the machine is free from rust. Due to this feature, it is easy for you to clean and maintenance.. Easy Operation Just simply install the clutch spring compressor in position, and turn the knob to place pressure on the spring cage until it gives you enough room to release the snap ring during repairs or overhaul, which saves your time and energy.. Suitable for Many Cars This tool kit can apply pressure to the clutch drum's retaining washer to compress piston return springs, which can be used on most American cars and light trucks such as Crown Victoria, Town Car, Ranger and Focus.. Lightweight to Easy-Carry This clutch spring compressor only weighs 2.8lbs, so that you can carry it easily. And because of its compact frame, you can put it on your car in case you need it someday..

Connects to CTA Tools part 7400 ATF Filling Tank. Compatible with Nissan vehicles with 12 x 1.25 threaded end. Will work on all ATF Filling System Tanks. Replacement for Nissan Factory Tool KV311039S0.

Tool snaps around cooler line and when pushed into the fitting releases the fitting. The cooler line can then be removed. 38 disconnect is used on 2003 - newer Ford Explorers with the 5R55W transmission. 12 disconnect is used on 2003 - newer Ford Super Duty Trucks with the 4R100 transmission. Similar to Ford Numbers 307-441 and 307-459.

Built to Last Dometic camper accessories are built to last. This billowing mechanism is made of durable material to withstand the elements.. Compatible With This anti-billowing RV awning mechanism is compatible with Dometic slide toppers.. Easy To Install Simply remove the old part and put on the new one in minutes with this DIY Friendly product.. Product Weight 3.9 ounces. Product Dimensions 4.5 x 4 x 0.5 inches.

Tapered end. Knurled handle. Black finish with reverse printing on scale for easier reading. Fit type Vehicle Specific.

Removes and Installs Snap-Ring to Long Reverse Piston and Return Spring. No Need to Remove Center Shaft and Clutch Assembly. Applications GM, Ford, Toyota and Other Vehicles. Heavy-Duty Construction Allows for Strength and Durability. Whether Tuning Up Your '68 Corvette or Changing The Oil on a John Deere Tractor, CTA Can Supply You with the Tools Needed to do the Job.

Use with CTA 7400. Services GM vehicles with 8L45 8L90 Transmission. Will work on most Non-CTA ATF Filling System Tanks. Applications Chevrolet, GMC Cadillac 2015.

Makes removing the clutch spring retainer easy.. Engages the lugs and pushes the piston return spring enough to access the snap ring. The whole process takes just a few minutes.. For use on these Transmissions 700-R4, 4L60, 4L60E, 4L65E 4L70.

This tool will remove the Low Reverse clutch piston in the rear of the case.. Makes removing the clutch spring retainer easy.. The whole process takes just a few minutes..

Made in the USA. Bench Mounts w included base. Full 360 degree swing.. Will handle engines, transmissions and other components weighing up to 250 lbs.. All Steel Construction with steel arms.. Allows work comfort at any angle..

APPLICATION For GM 200, 200C, 200-4R, 250, 250-C, 350, 350-C, 375, 400 3L80 , 425, 475 3L80-HD , 700-R4 4L60 4L60E. Powerglide Fit for Ford C4, C5, C6, AOD, AODE, AOD-EW 4R70W. E40DChrysler 404 30TH, 413, 470 31TH, 727 36RH 37RH, 904 30RH, 998 31RH, 999 32RH. ALTERNATIVE Compatible with Atec Trans-Tool T-0033 Kent-Moore J-45053. FUNCTION Design with Adjustable Jaws pump extractor allows to quickly removes conventional type pumps without damage, makeing the job faster and easier.. MATERIOR All components made of Heavy Duty steel, impact resistant, excellent solid and durable with great rust and corrosion resistance for years of trouble-free use.. SATISFIED GUARANTEE Aiming to give our customers the best products and services, we provide friendly 1-years warranty support and easy-to-reach Customer Service to make sure your investment.

Master Bushing Tool Set ---- deluxe custom driver kit, assist in the bearing race and seal replacement on your car, truck transmission, axle, wheel hub when installing new bearing seal back into your vehicles. Universal Compatibility ---- our bearing and seal driver set has 50 interchangeable discs, giving you an amazing 2,450 different variations due to each of the 50 discs being interchangeable with each other. The discs go from 0.7 inches all the way to 2.55 inches in 1mm increments plus 2.9 inches. All discs are connected with a 0.47 inches shaft and screw which connects to a 7.08 inch handle, making the wheel bearing driver set complete and effect.. Heavy Duty and Durability ---- heavy-duty carbon steel construction black anodic oxidation for ultimate anti-rust performance, these components will stand up to heavy use and accidental drops. Perfect for off road weekend warriors, novices, and professional mechanics.. Effective Press Kit ---- everything you need for a fast effective removal and installation of wheel bearings on your cars or trucks easily replaces wheel bearings with our multi-size bushing discs and heavy-duty long handle shaft. Comes with the case ---- Each kit includes illustrated parts diagram making operation easily. It is equipped with 50pcs bushing discs, 1pc long handle shaft and necessary assemblies. Comes in a heavy duty, blow molded case for every parts, easy for storage and transport..

WIDE APPLICATION - use on these Transmissions, for Ford C4, C5, C6, AOD, AOD-E, AOD-EW 4R70W, AXOD, AXOD-E AX45 AX4N for Chrysler 904 30RH, 998 31RR, 999 32RH. STABLE PERFOEMANCE - help to securely hold, position and rotate small engines, transmissions, rear axle differentials and other components This holding fixture will handle pieces weighing up to 250 lbs., offer 360 of rotation with positive stops at 90 increments. PROFESSIONAL DESIGN - bench Mounts w included base that will fit most other transmission holding fixtures, allows easy access to work on valve body, work comfort at any angle. Similar to OTC 7020 , Ford Motorcraft PN 307-003 T57L-500-B and Atec Trans-Tool T-0156-A. STABLE PERFOEMANCE - help to securely hold, position and rotate small engines, transmissions, rear axle differentials and other components This holding fixture will handle pieces weighing up to 250 lbs., offer 360 of rotation with positive stops at 90 increments. BUILT TO LAST - every part is carefully selected and tested, premium material provides great reliability in function, performance and quality. Durable affordable Transmission Holding Fixture Tool to make your job much easier.

Step-by-step procedures written from a complete teardown and rebuild, giving you the confidence to tackle repairs at any skill level.. Over 700 clear photos and diagrams that simplify complex systems, helping you complete jobs faster and with fewer mistakes.. Comprehensive troubleshooting and fault-finding guides to quickly diagnose problems and reduce costly downtime..

Fitment 38'' size Compatible with 2003 - 2010 Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS.. Fitment 12'' size Compatible with Ford Super Duty Trucks, F250, F350 and F450.. Material Made of High quality aluminum .. Easy to use this worked in seconds. It is strong, smooth to operate, and it's just the right size.. Package included 1pcs 38'' size disconnect tool , 1pcs 12'' size disconnect tool . 100 Satisfaction quality and service If you're not 100 satisfied with our PRODUCTS, simply return and refund in 30 days. Professional AND Sincere Service allows you to take no risks to purchase..

Fits Ford and Cadillac Designed to disconnect transmission oil cooler lines on Ford and Cadillac vehicles, this tool fits both 38-inch and 12-inch lines with precision, helping techs speed up transmission work without damage.. Step Design Enhances Grip The specialized step design gives this line tool a precise profile, allowing easy engagement with transmission fittings in tight spaces where access is limited by hoses or components.. Durable Construction Lasts Longer Forged from sturdy metal with a strong, corrosion-resistant finish, this cooler line tool stands up to repeated shop use without bending, snapping, or losing edge performance.. Compact Size Improves Access At just 4.5 inches long and 1 inch wide, the compact frame easily fits into hard-to-reach areas around the transmission, letting mechanics work more efficiently in tight bays.. Trusted for Quick Repairs Whether in a professional garage or home shop, this cooler line tool is ideal for common fluid line disconnections, including transmission service, cooler upgrades, and flushes..

Universal Transmission Lip Seal Installer Protector. Designed to prevent cutting or damaging of the delicate seals and o-rings. Designed to prevent cutting or damaging of the delicate seals and o rings. Designed to prevent cutting or damaging of the delicate seals and o rings.

Made in the USA. Provides the easy removal and installation of the manual shaft shift lever seal.. Draining of the transmission fluid is not required.. The whole process takes just a few minutes.. Similar to Atec Trans-Tool T-1001, Kent-Moore J-43909, J-43911, KD Tools 2393, Snap-On YA9348 and Schley SL96480..

Model compatibilitySpecific shift lever shaft seal tool kit fits for GM auto transmission 4L60E, 4L65E, 4L70E, 4L80E. Fits for GM Chevy CK Series Trucks with V6 and V8 engines with long-style shifter shaft.. Include New SealParameter details of the new selector shaft seal are 0.45in ID 0.75 in OD 0.2 in thickness. Our transmission shifter seal tool kit includes QTY.1-new seal QTY.1-Shift lever seal remover, and QTY.1-Shift lever seal Installer.. Efficient Removal ToolThe upgrade manual shaft seal tool sed to remove the selector shaft seal with the transmission in the vehicle. Without taking off lowering the transmission, make your inspection repair of the shift lever seal a breeze. Specific shift lever shaft seal tool to repair your leaking transmission.. Build to LastHigh-Alloy steel forged components engineering durable shift lever seal remover tools for superior performance. With reliable durability, corrosion resistance, and anti-rust performance.. Satisfaction GuaranteeCamoo aims to provide excellent products and the best customer service. You can return it if you are not satisfied with the product. We support 30 days f-u-ll refunds for returns and a 1-year warranty..

10L Large Capacity Our pneumatic ATF pump has a 10L large capacity. It provides an easy way to extract and dispense transmission fluid quickly and cleanly. It's an ideal tool for oil replacement.. GREAT COMPATIBILITY The fluid transfer pump comes with 14 common adapters that fit a variety of automobiles, including famous cars like BMW, Porsche, VW, Honda, Audi and many others.. Dual Control Mechanism The fluid pump's dual control system with two-way valves blue screw knob and flow direction valve allows easy conversion between oil extracting and dispensing.. Ultra-secure Design It includes a gauge for pressure monitoring and a releasing valve preset 43PSI to release pressure when it is overloading, this eliminates any potential threats at work.. Corrosion Resistance Our transmission fluid pump is made of corrosion-resistance material, and it can withstand high pressure and also easy to wash..

Application Compatible with Ford Focus DCT Dual Clutch Transmission DPS6. Function Reuse a Dual Clutch Assembly that has been removedpreviously installed.Without this tool you will need to purchase a new DCT clutch assembly, use this tool you can reinstall a good used clutch assembly. Reinstall Dual Clutch Transmission It respringsre-trips the springs on the clutch so that you can reinstall it again. 12 Months Warranty We offer 12 months warranty, we will refund or replace, if the DCT DPS6 Dual Clutch transmission reinstall have any quality problem.

Special designed to disassembly install dry transmission, and align the twin-clutch to change the oil seal.. Compatible with VOLVO, FORD, Focus, and transmission DPS6.. This Twin-Clutch Dry Transmission tool have been tested several time and strict quality inspection, to ensure compatibility with transmission DPS6.. This tool is made by heavy duty steel, which is corrosion-resistant, high in hardness and long in service life.. Worry-free 12 months warranty and friendly after-sales customer service..

Schley Products GM Transmission Seal With Neutral Safety Switch RR Tool SLY-96480.

Our Dual Clutch Tools are special designed to disassembly install dry transmission, and align the twin-clutch to change the oil seal.. Compatible with Ford, Fiesta, Focus, Volvo, and transmission DPS6. Perfect Replacement for FM Number 307675.. Our Twin-Clutch Dry Transmission tools have been tested many times and undergo rigorous quality inspections to ensure compatibility with transmission DPS6.. Made by heavy duty steel, which is corrosion-resistant, high in hardness and long in service life.. We provided lifetime warranty, and friendly customer service..