Fits most vehicles. Can be installed without removing rack and pinion from vehicle, thus eliminating need for an alignment. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions. One year .

This Transom Seal Bearing Gimbal Bellows Kit for 86-93 OMC Cobra Voolvo Penta SX Model. Replaces 508105, 911826, 914036, 983973, 987467, 3841481, 3850426,, 3853807, 3854127, 21752712, 22197130508105, 911826, 914036, 983973, 987467, 3841481, 3850426,, 3853807, 3854127, 21752712, 22197130. Fit Voolvo Penta SX-S, SX-C, SX-R, SX-M, DP-S, DP-S1, DP-SM. Fit OMC Cobra Stern Drive Models 1986-1993. Includes all accessories pictured.

Kit Includes 2x Rack and Pinion Tie Rod Boots Bellows. Fits Specific Models - Check Fitment Chart and Product Description for Accurate Information. Steering boot is made of high quality rubber material.It is in good use condition.Helps prevent dirt, water, and debris from getting inside and damaging the steering rack. Protect the steering rack from damage.. The product has undergone rubber resistance to ozone aging, sediment impact, high and low temperatures, and fatigue tests to ensure the quality and stability of the product.. Warranty and Support -- Limited warranty and friendly customer service.

FitmentToolwiz tie rod boot is 8.85220mm Length, Small End 0.3910mm ID, Large End 1.2534mm. It is compatible with inner tie rod shaft diameter 1012 mm 0.390.47 in, steering rack housing outer diameter 3335 mm 1.301.38 in. Thanks to its soft material and flexibility, this steering rack boot can be cut to fit various rack and pinion sizes, providing effective protection for the steering system. It is compatible with most cars, trucks, SUVs, and other vehicles. Please double-checking your vehicles model and steering rack size before purchasing to ensure proper fit.. Waterproof DustproofToolwiz tie rod boot kit helps protect your car's power steering rack and pinion from dust, water, and other debris, effectively reducing wear and tear on the steering components, preventing safety hazards caused by steering system malfunctions while enhancing the system's reliability and responsiveness. Anti-Wear Silicone MaterialCrafted from high-quality silicone, our inner tie rod dust boot offers outstanding durability, flexibility, and anti-slip. It can increase the friction between the sheath and the steering rack to prevent the sheath from slipping or shifting during steering. It resists wear, aging, stain, and extreme temperatures without deforming, which ensures stable performance in harsh conditions and provides long-term protection for your vehicle's steering system. Easy InstallationFirst, remove the wheel, disconnect the outer tie rod end, remove the old dust cover, and clean any dirt or old grease from the tie rod. Then, slide the new dust cover into place and press it onto the power steering rack, making sure it is sealed securely and no twisting or kinking in the rubber. Finally, use the included bellows tie or clamp to secure the dust cover and lock it tight. Complete Kit IncludedOur tie rod boot kit comes with everything you need for installation. It includes 2 x rack and pinion boots, 2 x small clamps max I.D. 1.82 46 mm, 2 x large clamps max I.D. 2.36 60 mm, and 6 x wire ties 7.8 200mm long.

Vehicle Fitment Compatible with Chevrolet Silverado 1500 1999-2006 RWD Compatible with GMC Sierra 1500 1999-2006 RWD --- For Left Hand Drive Only with Hydraulic Power Steering. Reference Part Number Rack and Pinion Steering Assembly 19133675, 26079794, 26079801, 26087761, 26091958, 26101929, 88963415, 22-1000, 97-1000 Tie Rod End MES3492T, 26076544, ES3492T. Fix Steering System A-premium steering system kit is equipped with advanced sealing components to effectively prevent oil leakage. Additionally, this kit can effectively solve the following steering problems difficulty turning the steering wheel, noises when turning, leaking power steering fluid, and uneven tire wear - restoring your vehicle's optimal performance. Package Details 1 x Rack and Pinion Steering Assembly 2 x Outer Tie Rods. Buy with Confidence A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted rack pinion and tie rod end. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.

Efficient Protection Our inner tie rod boot features a hollow design that allows air to flow on both sides of the gears, reducing the high temperature and pressure in the steering system, minimizing the risk of deformation, and ensuring stable performance over time, while effectively preventing the ingress of water and impurities. Quality Material The universal steering rack and pinion tie rod boot is made of wear-resistant silicone with good elasticity, which can resist aging and the effects of bad weather, providing long-lasting protection for the steering system and prolonging its service time. Total Package Each Steering Rack Boot Kit includes 2 tie rod guards, 6 cable ties about 7.87 inches long, 4 bellows locking clips large clip caliber is about 2.76 inches, small clip caliber is about 1.97 inches, no need to buy additional accessories, easy to install and enhance the efficiency of use. Easy to install The silicone bellow boot is extremely easy to install, simply remove the old sheath, easily clean the surface of the steering rack, and then place the new sheath to perfectly cover the area that needs to be protected. Easily secured with the included cable ties and C-clamps to ensure stability, a final check and you're ready to travel safely. Wide Compatibility Our rack and pinion boots are suitable for most cars, SUVs, trucks and trailers, you can easily judge the compatibility according to the product size bellows large diameter is about 1.38 inches, small diameter is about 0.59 inches to ensure the best protection and performance for your vehicle.

COMPLETE KIT - Each package includes 2 Tie Rod Boots, 6 Cable Ties and 4 Bellows with Locking Clamps, providing you with all the necessary components for a full and secure installation.. CUSTOMIZABLE FIT - With a size of approximately 23x6 cm 9.06x2.36 inches, our versatile boot gaiter can be easily cut to the specific size you need, making it a perfect fit for most vehicles.. EFFORTLESS INSTALLATION - Designed for convenience, our steering boot gaiter can be installed quickly and easily without the need to remove the rack and pinion from your vehicle, saving you time and effort.. PRACTICAL DESIGN - The easy-to-install, reliable design ensures that your vehicle's steering system is protected from dust and debris, enhancing the longevity and safety of your driving experience.. SUPERIOR QUALITY CONSTRUCTION - Made from durable silicone and metal, our Rack Steering Boot Gaiter and Pinion Boot are built to last, ensuring longevity and continual performance under rigorous conditions..

Kit Includes 2x Rack and Pinion Tie Rod Boots Bellows. Fits Specific Models - Check Fitment Chart and Product Description for Accurate Information. Steering boot is made of high quality rubber material.It is in good use condition.Helps prevent dirt, water, and debris from getting inside and damaging the steering rack. Protect the steering rack from damage.. The product has undergone rubber resistance to ozone aging, sediment impact, high and low temperatures, and fatigue tests to ensure the quality and stability of the product.. Warranty and Support -- Limited warranty and friendly customer service.

Great Material This ball cage dust cover is made of high quality rubber material, smooth and soft to touch, lightweight and hard texture. It has good sealing, waterproof, dustproof, heat dissipation, flame retardant and impact resistance, high and low temperature resistance, not easy to break and fall off, can be used for a long time.. Dustproof Design It can effectively isolate dust and impurities from entering the inside of the ball cage, avoiding accelerated universal joint wear. It also prevents grease from leaking, maintains long-lasting lubrication of the cage and extends the overall life of the steering system, ensures that the cage transmits power stably under high stress conditions such as cornering and shifting, and reduces the risk of steering rattling or stalling.. Wide Application This ball cage dust cover is universal for most car models on the market, you don't need to worry about mismatch with your car. In addition, it can also be used in commercial and specialty vehicles to improve steering response reliability under heavy load or extreme driving conditions.. Easy Installation First you need to jack up the vehicle, disassemble the ball cage connection parts, remove the old ball cage bushing and half shaft. 2. After cleaning the installation area, insert the half-shaft into the new cage, make sure the key teeth are aligned, and finally install the dust cover and tighten the retaining ring to prevent the dust cover from loosening or shifting.. Package You will get 2 x ball cage dust sleeves. It is a key accessory that combines practicality and safety through dustproof sealing and lubrication protection to ensure the steering safety and transmission efficiency of the vehicle in different driving scenarios..

DUSTPROOF WATERPROOF PROTECTION This inner tie rod boot creates a tight seal around your steering rack and pinion, effectively blocking dust, sand, moisture, mud, and road debris from entering the steering system. It protects the rack, gears, and tie rod ball joints from corrosion and premature wear, ensuring smooth and responsive steering over the long term.. THICKENED SILICONE CONSTRUCTION Crafted from premium thickened silicone, this rack and pinion bellow withstands extreme temperatures from -40F to 450F without cracking, hardening, or deforming. Unlike cheap rubber boots that degrade in 6-12 months, our silicone material resists aging, oil, UV exposure, and harsh weather, delivering long-lasting protection through years of demanding driving conditions.. UNIVERSAL CUTTABLE FIT Each boot measures 8.8 inches in length with a small end ID of 0.4 OD 0.58 and a large end ID of 1.3 OD 1.5. Both ends feature multi-caliber stepped design and can be precisely trimmed to different inner diameters 0.39, 0.78, 1.1, 1.25, 1.37, 1.49, 1.65, and 1.77. This adjustable fit covers most cars, SUVs, pickup trucks, and light commercial vehicles. Please measure your steering rack before purchasing.. COMPLETE TIE ROD BOOT KIT WITH ALL ACCESSORIES Each package includes 2 silicone rack and pinion boots, 6 heavy-duty nylon cable ties 7.76 long, and 4 stainless steel locking clamps 2 large clamps with 4.34 max ID 2 small clamps with 2.22 max ID. No need to purchase additional installation hardwareeverything you need for a complete, professional replacement is in the box.. EASY DIY INSTALLATION IN 4 STEPS No need to remove the rack and pinion from your vehicle. 1 Remove the old worn tie rod boot and clean the steering rack surface 2 Slide the new silicone bellow over the tie rod until fully covered 3 Trim both ends to match your steering rack diameter if needed 4 Secure with the included cable ties and clamps. Save hundreds in mechanic feessuitable for both DIY enthusiasts and professional repair shops..

Applicable Car Models For Buick Century 1997 1998 1999 2000 2001 2002 2003 2004 2005 Without Magnasteer,For Buick Lacrosse 3.8L 2005 -2009 Without Magnasteer,For Buick Regal 1997 Without Magnasteer,For Buick Regal 2003 2004 Without Magnasteer,For Chevrolet Impala 2000- 2011,For Chevrolet Monte Carlo 2000 -2007,For Pontiac Grand Prix 1997-2008 Without Magnasteer. Reference OE Number 22-186, 22186, 26021769, 26056808. Specification Input Shaft Diameter 0.66 in Input Shaft Length 1.88 in Rack Length 49.50 in Thread Length 2.45 in Pressure Port Thread Size M18 x 1.5 Return Port Thread Size M16 x 1.5 Total Turns Lock To Lock 3.00. Premium Materials - Manufactured from superior grade, sturdy materials, they deliver unapologetic strength and durability to withstand driving across rocky, viscous, or just about any other unforgiving terrain. Note - Please check detailed fitment information with the Product description, make sure whether the power steering Rack Pinion fits your car before placing order.

Reference part number 5412012 5412013. Compatible with Polaris RZR 570 2012-2022, RZR 800 2008-2014, RZR 900 2011-2021, RZR 1000 2014-2022. Compatible with Polaris Ranger 500 2006-2013, Ranger 570 2014-2017, Ranger 700 2006-2009, Ranger 800 2010-2016, Ranger 900 2013-2019, Ranger 1000 2017-2022. Package included 2x Steering Rack Boots.

FITMENT - 2003-2009 For Toyota For 4Runner, 2007-2012 For Toyota Camry, 2003-2008 For Toyota Corolla, 2003-2008 For Toyota Matrix, 2009-2015 For Toyota Venza,2011-2015 For Chevy Cruze, 2016 For Chevy Cruze Limited, 2010-2017 For Chevy Equinox L4 2.4L, 2011-2015 For Chevy Volt, 2011-2017 For Ford Explorer, 2009-2015 For Ford Flex, 2010-2016 For Ford Taurus, 2010-2017 For GMC Terrain L4 2.4L, 2013-2018 For Hyundai Santa Fe,2012-2017 For Buick Verano,. ANTI-DUST DIRT - Using this steering rack boot kit prevents dust, dirt, sand, moisture and other external impurities from intruding into the interior of your car's steering system, which may lead to wear of the rack and pinion as well as other steering components, avoids safety hazards due to steering system malfunctions, and improves the reliability and responsiveness of the steering system. HIGH PERFORMANCE - ONE YEAR REPLACEMENT - Our steering rack boot kit have undergone extreme impact, wear and fatigue pre-try to help ensure quality and durability. FUNCTION - Steering Bellows have Advanced surface coating, precision-made performance and additional strength.. IMPORTANT NOTE - Please check the description or use the year,make,model in the Fitment Filter System in the top left corner to confirm the compatibility.

Full ProtectionRack and pinion boot prevents tires, bridges, water, and moisture from invading the interior of the car's steering system, protects the rack and pinion and other steering pivots from wear, and effectively improves the reliability and responsiveness of the steering system. High-quality Materials The steering rack and pinion is made of high-quality silicone material, which has good elasticity, wear resistance and durability, can withstand extreme weather and temperature, is not easy to deform and age, and supports long-term use. Full Set of AccessoriesOur inner tie rod boot tool kit includes tie rod boot 2, cable ties 6, and bellow clamps 4. A full set of accessories, you don't need to buy other tools separately, you can install it after receiving it. Free CuttingYou can freely cut both ends of the tie rod boot according to actual needs to get the right size, including inner diameter 0.39 0.78 1.1 1.37 1.25 1.49 1.65 1.77, suitable for most cars, SUVs, trucks and trailers. Warm Tips The length of the cut product will also be shortened accordingly. Easy to InstallThe installation is very simple, just remove the old kit, clean the steering rack surface, put the new steering rack cover on the rack, keep it completely covering the parts that need protection, use the provided cable ties and locking clips to secure both ends.

Wide Compatibility This steering rack boot replacement for polaris ranger steering boot compatible with Polaris Ranger RZR 400 2010, RZR 500 2006-2012, RZR 570 2012-2016, RZR 700 2005- 2009, RZR 800 2008-2014, RZR 900 2012-2016, RZR 1000 2014-2016, ETX 2015, EV 2012. Replacement Part This steering boots replacement part for 5412013 polaris ranger steering boot and 5412012 polaris ranger steering boot. High quality material This steering rack boot is made of high quality rubber material. It can help to prevent dirt, water, and debris from getting inside and corroding the steering rack, protect the steering rack from damage. Universal Fit These steering rack boots can direct replacement for your original or old steering rack boots, replacement for polaris ranger steering boot, for polaris inner tie rod boot, for polaris ranger steering rack boot, for poloris ranger rack and pinion boot, for 5412013 polaris ranger steering boot, for 5412012 polaris ranger steering boot, etc. After-Sales Service We are dedicated to offering quality service. If you have any questions or concerns about our steering rack boots within 60 days, please contact us, and we will provide you with a satisfactory solution within 24 hours.

High QualityThe dust cover of the car rack and pinion is made of high-quality silicone, which is resistant to high and low temperatures and corrosion, has good flexibility, and can rebound quickly even if it is repeatedly bent or stretched. It can withstand the influence of bad weather, provide lasting protection for the steering system, and extend its service life. Practical FunctionsThe steering rack guide tool kit adopts a hollow design to allow air to flow on both sides of the gear, reducing the high temperature and pressure in the steering system and minimizing the risk of deformation. It can fit the tie rod tightly and completely cover the rack and pinion, effectively preventing dust, dirt, sand, moisture and other external impurities from invading the interior of the c. CuttableBoth ends of the pull rod dust cover can be cut according to your actual needs to adapt to different models of steering systems and meet various needs. There are a variety of different caliber specifications to choose from, the inner diameter is 0.39 0.78 1.1 1.37 1.25 1.49 1.65 1.77. Warm reminder The length of the product will also become shorter after cutting. Easy to Install The silicone bellows cover is extremely easy to install, just remove the old cover, easily clean the steering rack surface, and then place the new cover to perfectly cover the area that needs protection. Use the provided cable ties and locking clips to secure the ends. Detailed SizeThis kit includes 2 tie rod protection covers with a length of 8.85 inches, a small port with an outer diameter of 0.42 inches and an inner diameter of 0.39 inches, a large port with an outer diameter of 1.34 inches and an inner diameter of 1.25 inches, 6 cable ties about 7.87 inches long and 4 bellows locking clamps large clamp diameter is about 2.76 inches, small clamp diameter is about 1.97 inches Please check the size data you need before purchasing.

Installed on each side of your vehicle's rack and pinion steering gear. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. Premium aftermarket replacement part. Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models.

Installed on each side of your vehicle's rack and pinion steering gear. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. Premium aftermarket replacement part. Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models.

Matches OE form, fit, and function. One piece neoprene boot this is not a split boot. Includes boot and two clamps for complete installation.. Quality construction for durability. Application specific to ensure a correct fit for your vehicle.

Matches OE form, fit, and function. One piece neoprene boot this is not a split boot. Includes boot and two clamps for complete installation.. Quality construction for durability. Application specific to ensure a correct fit for your vehicle.

Package Includes You will receive two rack and pinion boots, 8.54 inches long, with a small port of 0.63 inches O.D. and 0.43 inches I.D., a large port of 1.53 inches O.D. and 1.33 inches I.D. There are also six 7.83-inch cable ties, please check sizes before purchasing.. Protective Function It protects the steering system by tightly coating the rack and pinion and keeping out foreign objects such as dust, mud, rain. This effectively minimizes wear and tear of components and avoids steering jamming and rattling problems, ensuring accurate and smooth steering every time.. Reliable Material Our product is made of high quality silicone, which is resistant to high and low temperatures and corrosion, and can work stably in various environments without melting or deforming. It is also flexible and can rebound quickly even when it is repeatedly bent and stretched.. Easy to Use Installing it is simple. First, align the protective boots with the steering rack and pinion and slowly slip them in. Next, use the cable ties to tighten them at the proper spacing to ensure a snug fit. Finally, fasten the clamps and apply some force to tighten them.. Flexible Applicability The product is available in many different caliber specifications, covering outside diameter 0.98, 1.29, 1.60, 1.62, 1.77, 1.94, 2.12. It is suitable for most cars and trucks, and can be easily cut to fit the steering system of different models to meet various needs..

Matches OE form, fit, and function. One piece neoprene boot this is not a split boot. Includes boot and two clamps for complete installation.. Quality construction for durability. Application specific to ensure a correct fit for your vehicle.

Matches OE form, fit and function. One piece neoprene boot this is not a split boot. Includes boot and two clamps for complete installation.. Quality construction for durability. Application specific for this vehicle.

Rein OE quality power steering rack bellows boots are high quality replacements for your torn or leaking rack boots. Matches original equipment design specifications for form, fit, and function, ensuring a perfect fit and a no-hassle, modification free installation. Boots are manufactured with highest quality materials to prevent cracking, wear, and leaking. Comes with all needed hardware for a complete repair clamps, washers, clips, etc. 2 per vehicle sold individually.

COMPATIBILITY Fits 1997-2003 Dodge Dakota 1999-2003 Dodge Durango 2007-2007 Chevrolet Silverado 1500 Classic 1999-2006 Chevrolet Silverado 1500 2007-2007 GMC Sierra 1500 Classic 1999-2006 GMC Sierra 1500 1993-2002 Nissan Quest. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. Easy to install. Manufactured using premium materials. Engineered to provide long life and dependability. Construction and design validated by MOOG engineers. Incorporates proven design and engineering features.

Rack Pinion Bellow Boot Fitment2008-2010 for Dodge Challenger,2006-2010 for Dodge Charger,2005-2008 for Dodge Magnum,2003-2006 for Ford Expedition,2005-2008 for Ford F150,2004 for Ford F150 Truck with New Body Style,2005-2010 for Ford for Mustang,2017-2021 for GMC Canyon,2018-2020 for GMC Terrain,2003-2005 for Lincoln Aviator,2006-2008 for Lincoln Mark LT,2003-2006 for Lincoln Navigator,2008-2011 for Toyota for Land Cruiser,2008-2020 for Toyota for Sequoia,2007-2020 for Toyota for Tundra. Rack Pinion Bellow Boot Fitment2017-2021 for Chevy Colorado, 2018-2020 for Chevy Equinox, 2016-2018 for Chevy for Malibu, 2005-2010 for Chrysler 300, 2009-2015 for Audi A4, 2009-2015 for Audi A4 Quattro, 2010-2012 for Audi A5, 2008-2012 for Audi A5 Quattro, 2011-2015 for Audi A8 Quattro, 2014-2015 for Audi Allroad, 2009-2013 for Audi Q5, 2004-2012 for Audi S4, 2008-2012 for Audi S5, 2013-2017 for Audi S8, 2016-2020 for Buick Envision. Thickened and Durable MaterialThe upgraded steering tie rod boot is made of thickened material, which has excellent high and low temperature resistance, and is not prone to hardening or cracking in harsh weather and complex road conditions. Its significantly improved toughness allows it to fit tightly to the tie rod without loosening, and it will not fall off even when the vehicle vibrates. It also reduces wear and tear on moving parts, extending the lifespan of core components. Easy to InstallThe installation steps are simple and easy to understand Remove old boots and clean the old residue from the steering parts Put the new boot cover on the tie rod until fully covered Secure it with clamps and cable ties Check firm fit before driving. It is perfectly compatible with the steering systems of various vehicle types, including sedans, SUVs, and trucks. High Performance - ONE YEAR REPLACEMENT - It is recommended to regularly check the boot for damage, aging, or deformation, and to ensure the fixing devices at both ends are secure. Replace any damaged rack and pinion tie rod boot promptly to effectively extend the lifespan of the steering system's core components.

Designed, engineered, tested, and warranted for GM vehicles. Precise fit for ease of installation. For proper installation, locate your nearest GM dealer, independent service center, or body shop.

Matches OE form, fit, and function. One piece neoprene boot this is not a split boot. Includes boot and two clamps for complete installation.. Quality construction for durability. Application specific to ensure a correct fit for your vehicle.

Matches OE form, fit and function. One piece neoprene boot this is not a split boot. Includes boot and two clamps for complete installation.. Quality construction for durability. Application specific for this vehicle.

Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. Economical value with dependable quality. For General Motors vehicles as well as most makes and models.

Matches OE form, fit, and function. One piece neoprene boot this is not a split boot. Includes boot and two clamps for complete installation.. Quality construction for durability. Application specific to ensure a correct fit for your vehicle.

STEERING RACK BOOT SIZE - The steering boot is 8.54 inch in length, the small port diameter is 0.65 inch, the large port diameter is 2.36 inch, please check the size data you need before purchasing. PACKAGE DETAILS - 1x Steering Rack Boot with Rack and Pinion Bellow Clamps. DURABILITY - Advanced-tech material can absorb impact and reduce the friction which undergo comprehensive use in all condition. Reinforced design provides abrasion resistance which covers -40F to 250F durability. EASY INSTALLATION - Rack pinion bellow boots steering kit is conveniently designed to keep your vehicle's steering system protected from dust and debris, and installs quickly and easily, extending the life and your driving experience, saving you time and effort. PURCHASE NOTES - Please check the steering rack boot kit regularly. If it is damaged, please replace it immediately. Before purchasing, please check whether the part is suitable for your model. Whether you need help choosing the right part or need advice on how to install it, we are here to help you.

It is steering rack driver and passenger side boots for Clubcar DS Carts.. Fits for Club Car DS GE golf carts 1976-2008.. reference number 1013035, 101880001. Comes with a Long Steering Bellow and a short bellow, 4pcs stainless ties.. Easy Installation.

Dependable replacement. Economically priced. Provide the performance you expect from ACDelco.

Dependable replacement. Economically priced. Provide the performance you expect from ACDelco.

Premium, High-Quality Aftermarket Component.. Engineered To Meet Your Expectations For Fit, Form, And Function.. Provides The Performance And Dependability You Expect From Acdelco.. Country Of Origin China.

premium, high-quality aftermarket component. engineered to meet your expectations for fit, form, and function. provides the performance and dependability you expect from acdelco. Fit type Vehicle Specific.

Matches OE form, fit and function. One piece neoprene boot this is not a split boot. Includes boot and two clamps for complete installation.. Quality construction for durability. Application specific for this vehicle.

Easy to install. Manufactured using premium materials. Engineered to provide long life and dependability. Construction and design validated by MOOG engineers. Incorporates proven design and engineering features.

Package Dimensions 9 L x 3.25 H x 3.25 W inches. Package Weight 0.39 pounds. Country of Origin Japan. Part Number K9446.