Dana 30 Inner Axle 2 pack Oil Seals Replaces Spicer 46470. Kit fits 1972 - 1986 All CJsbr 1997 - 2006 All TJsbr 1984 - 2001 Cherokee without disconnect front endbr 1987 - 1995 Wrangler YJ without disconnect front endbr 2007 2011 Wrangler JK br. Highest quality aftermarket parts available. 100 satisfaction guaranteed.

Direct replacement - this differential pinion seal is designed to help restore proper sealing and prevent fluid leaks on specified fitments. Leak protection - replacing a cracked or worn seal can help maintain fluid levels and ensure reliable differential performance in heavy duty applications. Durable construction - designed and manufactured to strict specifications for reliable performance. Trustworthy quality - backed by a team of product experts in the United States with more than a century of experience in the design of heavy duty truck parts. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle..

Design type spring loaded multi-lip. Temperature range -20F to 300F -29C to 49C. Resistance to EP lubricants. Low swell in hydrocarbon fluids. Delivers quality and reliable performance for every type of repair. Material Polyacrylate. Design type Spring loaded multi-lip. Temperature range Minus 20 degree Fahrenheit to 300 degree Fahrenheit. Compatible with most oils and EP lubricants at higher operating temperatures. High resistance to oxidation and ozone, and has low swell in hydrocarbon fluids.

Pinion seal. Fits 2001 up Ford van with Dana Spicer 60, also Dana Spicer 44HD in Grand Cherokee, Corvette and Viper.

Country of Origin Taiwan, Province Of China. Package Dimensions 1.0 L x 1.0 H x 1.0 Winches. Package Weight 0.14 pounds. Precision Fitting. Fit type Vehicle Specific.

Design type spring loaded multi-lip. Temperature range -40F to 400F -40C to 204C. Excellent high temperature capabilities. Compatible with wide range of fluids. Delivers quality and reliable performance for every type of repair. Material Fluoroelastomer. Design type Spring loaded multi-lip. Temperature range Minus 40 degree Fahrenheit to 400 degree Fahrenheit. Excellent high temperature capabilities and compatible within a wide range of fluids. Provides long life while providing superior performance.

Compatible with wide range of fluids. Package Dimensions 0.75 H x 4.0 L x 4.0 W inches. Package Weight 0.16 pounds. Country of Origin Taiwan.

Design type spring loaded multi-lip. Temperature range -20F to 300F -29C to 49C. Resistance to EP lubricants. Low swell in hydrocarbon fluids. Delivers quality and reliable performance for every type of repair. Material Polyacrylate. Design type Spring loaded multi-lip. Temperature range Minus 20 degree Fahrenheit to 300 degree Fahrenheit. Compatible with most oils and EP lubricants at higher operating temperatures. High resistance to oxidation and ozone, and has low swell in hydrocarbon fluids.

Design type spring loaded multi-lip. Temperature range -40F to 225F -40C to 107C. Good low temperature capability. Low swell in hydrocarbon fluids. Delivers quality and reliable performance for every type of repair. Material Nitrile. Design type Spring loaded multi-lip. Temperature range Minus 40 degree Fahrenheit to 225 degree Fahrenheit. Provides good low temperature capability. Low swell in hydrocarbon fluids.

Contains the quality components required for steering unit repair. Part number 8401432. Fit type Vehicle Specific. Oem equivalent part number 8401432.

Contains the quality components required for steering unit repair. Fit type Vehicle Specific. Included components Rack and Pinion Seal Kit. Package Dimensions 2.8 L x 28.8 H x 14.8 W centimeters.

Contains the quality components required for steering Unit repair. Fit type Vehicle Specific. Package Weight 0.25 pounds. Made in China.

Pinion seal. Fits Chrysler 8.75 with '41' and '89' case housings and 2000 and down Chrysler 9.25.

Contains the quality components required for steering unit repair. Fit type Vehicle Specific. Included components Rack and Pinion Seal Kit. Item Package Weight 0.25 pounds.

Pinion seal. Fits GM 8.6.

Pinion seal. Fits Dana Spicer 80 with 4.125 O.D. pinion bearing.

country of origin taiwan, province of china. package dimensions 1.0 l x 1.0 h x 1.0 winches. package weight 0.2 pounds. precision fitting. Fit type Vehicle Specific.

Package Dimensions 4.4 L x 1.2 H x 4.4 W inches. Package Weight 0.08 pounds. Made in Taiwan. Fit Type Universal.

Pinion seal. Fits Chrysler 7.25 and 8.25.

Provides the performance you expect from ACDelco. Product type AUTO PART. Package dimensions 2.794 cm L x9.906 cm W x10.922 cm H. country of origin Taiwan.

Pinion seal. Fits Dana Spicer 25, 27, 30, 40 and 50.

COMPATIBILITY Fits 2015-2018 Ford Transit-150 2015-2018 Ford Transit-250 2015-2018 Ford Transit-350 2015-2018 Ford Transit-350 HD 2004-2004 Ford F-150 Heritage 1999-1999 Ford E-150 Econoline 2000-2000 Ford E-150 Econoline 2001-2002 Ford E-150 Eco. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. Design type spring loaded multi-lip. Temperature range -40F to 400F -40C to 204C. Excellent high temperature capabilities. Compatible with wide range of fluids. Delivers quality and reliable performance for every type of repair.

Design type spring loaded multi-lip. Temperature range -40F to 225F -40C to 107C. Good low temperature capability. Low swell in hydrocarbon fluids. Delivers quality and reliable performance for every type of repair. Material Nitrile. Design type Spring loaded multi-lip. Temperature range Minus 40 degree Fahrenheit to 225 degree Fahrenheit. Provides good low temperature capability. Low swell in hydrocarbon fluids.

COMPATIBLE with all tire sizes 26, 27.5, 27.5, 29, 29, MTB, road, cyclocross and fat bikes, the Airshot holds enough air to seat your tires on the rims every time you need to change your tubeless tire or replace the tubeless tire sealant.. SIMPLE and EFFICIENT, the Airshot is designed to work with your existing bicycle floor pump and eliminate waste and misuse of the CO2 cartridges. Say goodbye to frustration and empty CO2 cartridges.. SAFE and SECURE, with a tested pressure up to 160psi 11atm and Presta valve compatible, you will forget about the compressor or CO2 inflator when you work on your tubeless wheels.. With PORTABILITY and small size, the Airshot can be easily stored in your home or carry in your trunk when riding far from home giving you peace of mind when is time to seat your tire on the rim.. The POP of the tire as it seats on the rim is the greatest sound in the world for any rider or racer that wants to fit a tubeless tire, and Airshot will deliver that to you..

VERSATILEWill help users easily install race seals without damaging the race or axle housing. CONTENTS 9 collardisc sizes 1.565, 1.750, 1.965, 2.325, 2.470, 2.555, 2.830, 2.995 and 3.180 along with driver handle 5-12. TECHNOLOGYConstructed form high strength aluminum for extra durability and strength. APPLICABLESuitable for straight installation on cars, small engine trucks, motorcycles, etc.. EASY STORAGEComes in a blow molded case for safe easy transport and Storage.

Proprietary engineering processes ensure that all CV Drive Axles meet OE form, fit and function. CV Drive Axle part numbers with an HD suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and durability versus a traditional neoprene boot. An axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped. CV Drive Axle measurements are validated after assembly to ensure a proper fit Threads are precision rolled to ensure proper fit when axle nut is installed. Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.

Replacement parts are MODEL SPECIFIC, this item is ESPECIALLY compatible with Instant Pot Duo 5?and?6 Quart. What you get 2 x sealing ring, 1 x steam release valve, 2 x float valve, 3 x float valve gasket. Keep Pressure Cooking Safe Replace old or damaged parts to keep your device in perfect condition, these replacement parts are designed to build and maintain pressure, without them the device will not work properly. Sweet and Savory Sealing Rings Comes with two different colors sealing ring to prevent the odors of certain foods from transferring among your favorite foods. The blue ring is for sweetdiary food and red for savory food. Come with 2 more float valve sealer gasket, easy to replace it after discolored or broken.

90-count bottle of Original Strength Pepcid AC All-Day Heartburn Relief Tablets with famotidine, for the prevention and relief of heartburn. Just 1 tablet controls acid all day or all night based on 9-hour acid control studies during the day and 12-hour acid control studies during the night. Each heartburn relief tablet is specially formulated with 10 milligrams of famotidine, a known acid reducer for aid in the relief and prevention of heartburn. This acid neutralizing medicine can be taken as early as 60 minutes prior to eating, or in as little as 15 minutes before consuming food and beverages that contribute to heartburn. Original Strength Pepcid AC can start to relieve the signs of heartburn in 15 to 30 minutes. Keep a package of these tablets at home and in the office to relieve heartburn whenever it strikes.

Package Dimension 11.43 cms L x 10.921 cms W x 2.54 cms H. Precision ground stainless steel sleeve for tough seal surface, fast shaft repair. Part number 99187. Package Weight 0.022 pounds.

Prevents seal leakage. Excellent sealing ability. Resists abrasives, corrosive moisture and other harmful contaminants from entering the machines. Offers superior service life. World-class manufacturing standards.

Precision Fitting. High Quality Seals. Fits Ford 7.5, 8.8 and some 9.75. Compatible with Differentials Ford 7.5, Ford 8.8 - 28 Spline, Ford 8.8 - 31 Spline, Ford 8.8 IRS Passenger Car 28 Spline, Ford 8.8 IRS SUV, Ford 8.8 Reverse Front 28 Spline, Ford 9.75 9 34 inch, '97-'98, Ford 9.75 9 34 inch, '99 only, Ford 9.75 IRS.