Achieve Perfect Clutch Alignment Ensures proper alignment of your Polaris RZR XP 1000s CVT clutch shafts, maximizing engagement for optimal performance. . Durable Anodized Aluminum Construction Built from high-strength anodized aluminum, providing lasting durability and resistance to wear during installation. . Quick and Easy Installation Makes aligning your clutch simple and efficient, saving you time while improving overall clutch performance. . Stays Secure The tool remains firmly in place during adjustments, allowing you to step away or take your time without worry. . Wide Compatibility Fits Polaris RZR XP 1000 2014-2023 and RZR XP 4 1000 2014-2023, and works with SuperATV, OEM, and aftermarket primary and secondary clutches..

FITMENT This clutch alignment tool compatible with Polaris GeneralRZRRanger XP 1000 2016-2024. Please check the year and model of your vehicle before purchasing to make sure it matches. APPLICATION This polaris clutch tool is used to accurately calibrate the alignment between engine clutches to ensure efficient power transmission, reduce belt wear, extend belt life and optimize vehicle performance. It can also be used to remove bolts or brackets that hold the engine and transmission together. HIGH QUALITY MATERIALS The alignment tool is made of high-quality aluminum, lightweight, rust-resistant, long-lasting, non-abrasive and very firm in use. It is also precision machined to ensure superb accuracy. EASY INSTALLATION Remove the clutch and install one end of the clutch alignment tool larger hole onto the secondary clutch shaft center and extend it to the crankshaft for alignment. Simple and efficient. REPLACEMENT This crankshaft spacing tool is made to original factory specifications and is a perfect match for the original car, replacing old or damaged tool.

Special CompatibilityTransmission Shaft Clutch Alignment Tool Compatible for Polaris RZR General Ranger XP 1000 2016-2024. Premium materialMade from premium aluminum for excellent durability, corrosion resistance and long-term durability. Essential ToolDesigned for removing bolts or brackets that secure the engine to the transmission. Better EngagementAccurately checks clutch engagement to ensure smooth power transfer and improve performance,optimizes belt life with correct shaft spacing a critical factor in extending the lifespan of your drive belt. Easy InstallationSimply remove both clutches, slide the larger end of the tool onto the secondary shaft, and use the primary clutch bolt to secure the smaller end to the crankshaft.

11pc Clutch Centering Tool Set Orion Motor Tech's 11-piece universal clutch alignment tool kit lets you accurately and easily align clutch plates and pilot bearings, including 3 spindles with expanding mandrel, 8 pilot bearing adapters, 6 rubber washers, and a pair of heavy-duty gloves.. Universal Compatibility The clutch centering tool boasts three spindle sizes, each equipped with expanding mandrels covering expansion areas of 0.59-0.75 in., 0.78-1.05 in., and 0.9-1.42 in. The 8 adapters enable precise plate adjustment to match various hub diameters, ideal for cars, SUVs, pickup trucks, and more. Precision Threading The precision threading of these clutch alignment tools ensures a secure and snug fit without causing damage to critical components such as the clutch plate, pressure plate, pilot bearing, and flywheel during operation.. Hassle-Free Use This clutch disc centering tool kit offers a straightforward assembly process without any complex steps. Simply choose the correct adapter and spindle for your vehicle, insert the tool through the center hole, turn and adjust the tool until it fits snugly, then the alignment tool is ready to be used.. Built to Withstand Tough Use This clutch plate centering tool uses structural-grade 45 steel for strength and longevity that outlasts and outperforms the competition. Each tool is chrome-plated for superior strength and scratch-free performance..

Vehicles ModelsCompatible with Polaris RZR XP 1000 2016-2023Compatible with Polaris RZR 1000S 2016-2024Compatible with Polaris General 2016-2024Compatible with Polais General XP and Deluxe 2016-2024Compatible with Polaris Ranger XP 1000Three Seat and Crew 2017Compatible with Polaris Ranger XP 1000Crew only 2018. Direct UseClutch alignment tool is a precise tool for removing the bolts or mounts holding the motor and transmission together,which can save time and money. Function and PerformanceEnsures correct properly alignment distance of your Polaris RZR XP 1000s CVT crankshaft and the transmission input shaft, maximizing engagement for optimal performance and optimizing belt life. Upgrade QualityHigh-strength anodized aluminum and durable anodized aluminum construction make our clutch alignment tool wear-resistance and have lasting durability. Easy InstallationTransmission shaft makes it simple and efficient to aligning your clutch for improving overall clutch performance..

For Polaris Ranger 1000 RZR Pro XP Turbo S 2018-2022. Replaces PN PU-52422. Package Include 1x Clutch Puller ToolWo Product Instruction.

Universal alignment kit for centering of the clutch disc.. Suitable for a wide range of vehicles and some light commercial vehicles.. Screw action provides fast adjustment for required hub diameter.. 8 interchangeable spigot adaptors aid close alignment. Adaptors0.47'', 0.55'', 0.59'', 0.63'', 0.67'', 0.7'', 0.75'', 0.78''12, 14, 15, 16, 17, 18, 19, 20?mm diameter.. 3 x expanding mandrels to align the clutch components. Diameters 0.59''-0.75'', 0.78''-1.05'',0.9''-1.42'' 15 -19?mm, 20 -26.6?mm, 23 -36?mm.

Wide UseThis transmission gearbox dry dual clutch DPS6 transmission is compatible with Ford DSG 6-speed dual clutch DPS6-transmission.compatible with Ford following series Fiesta 2011-2019, Focus 2012-2018,Transit Connect 2019, B-MAX since 2012 ect. RuggedATNVIDSG's dry dual clutch electromechanical unit unlock tool is made of industrial-grade carbon steel through a 24-step process, heat-treated and cooled, and will not change its finish or functionality when stored in complex weather conditions, making it an excellent Electromechanical Unit Unlocking Tool.. Easy to operateThe entire process is done by simply inserting the tool and turning it counterclockwise until the clutch until the clutch is completely. Product SizeClutch Motor Electromechanical unit unlock tool is 14 teeth 6mm size and a 14 drive socket.Tip Please double check that our tool sizes are compatible with your needs before you buy.. Best Service For all products purchased from ATNVIDSG,If you have other problems, you are welcome to by email or QA, we will help you solve the problem within 24 hours, except holidays..

Transmission Shaft Aluminum Clutch Alignment Tool,clutch alignment tool. Compatible With Polaris GeneralRZRRanger XP 1000 2016-2024.. Clutch alignment tool Used for precise alignment calibration between engine clutches to ensure efficient power transmission, reduce belt wear, extend belt life, and optimize vehicle performance. It can also be used to remove bolts or brackets securing the engine and transmission together..

Get a Grip This A C compressor clutch kit essential keeps the AC clutch plate from turning when loosening or tightening the retaining nut. Down to Brass Tacks With convenient adjustable pins, this AC clutch tool can be used on a wide variety of compressor clutches for removals, adjustments, and installations. Universal Appeal This AC clutch adjusting tool boasts a versatile three-stud design compatible with vehicles with 14-20 fan clutch mounting bolts for a precise, secure fit.. Handle With Care These professional-grade AC installation tools feature a comfortable, non-slip, rubber-coated handle for the most accurate AC clutch removal and service. Built to Last Cutting-edge manufacturing ensures lasting strength and durability Thanks to its quality construction, you can rely on this clutch holder tool for consistent, effective operation with every repair.

High precision calibration specially designed for clutch installation, ensuring precise alignment between clutch plates and flywheels.. material Made of high-strength alloy steel, it is wear-resistant, corrosion-resistant, and has a long service lifeComes with a toolbox for easy carrying and storage.. Strong universality suitable for most car models, including sedans, trucks, and SUVs.. Complete set of 10 Including conical clutch plate adapter and centering shaft, as well as adapters 0.984 inches, 0.827 inches, 0.787 inches, 0.748 inches, 0.669 inches, 0.63 inches, 0.591 inches, and 0.443 inches. Easy to operate Humanized design, simple operation, suitable for professional technicians and DIY enthusiasts..

Size Clutch aligning kit includes a 15cm long alignment tool shaft, 8 clutch disc adapters, and 8 guide shaft adapters, with adapter hole sizes ranging from 13mm to 24mm.. Precision Alignment Designed for quick and precise alignment of the flywheel pilot hole and clutch driven plate, helping to simplify the clutch installation process and improve repair efficiency.. Compatibility Suitable for most cars and light-duty commercial vehicles. Note Not compatible with trucks, SUVs, or heavy-duty vehicles.. High Quality Clutch drive plate alignment Tool made from premium steel and treated with a chemical black oxide coating, ensuring they are strong, durable, and highly resistant to rust for long-term use.. Service JEUCLEL aims to provide the most professional and comprehensive automotive repair tools and services in the automotive repair industry, with a focus on ensuring your peace of mind about our quality. If you have any questions, please feel free to contact us via email. We will offer you the best possible solutions..

This 11pcs universal clutch alignment tool kit helps you accurately and easily align clutch plates and pilot bearings. Including 3 spindles with expanding mandrel, 8 pilot bearing adapters.. The clutch centering tool Set has 3 spindle sizes, each equipped with expanding mandrels covering expansion areas of 0.59''-0.75'', 0.78''-1.05'', and 0.9''-1.42'' 15 -19 mm, 20 -26.6 mm, 23 -36 mmdiameter. 8 interchangeable spigot adapters enable precise plate adjustment to match various hub diameters, ideal for cars, SUVs, pickup trucks, and moreAdaptors0.47'', 0.55'', 0.59'', 0.63'', 0.67'', 0.7'', 0.75'', 0.78''12mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20 mm diameter.. The precision threading of these clutch alignment tools ensures a secure and snug fit without causing damage to critical components such as the clutch plate, pressure plate, pilot bearing, and flywheel during operation.. This clutch plate centering tool provides a straightforward assembly process without complex steps. Just choose the correct adapter and spindle for your vehicle, insert the tool through the center hole, turn and adjust the tool until it fits snugly, then the alignment tool is ready to be used.. This clutch disc centering tool kit is made of structural-grade 45 steel for strength and longevity that outlasts and outperforms the competition. Each tool is chrome-plated for strength and scratch-free performance..

1-78 29 splines, 1 10 splines, 0.670 pilot. FitsFord- 2000 3 cylinder 1965-1974, 2150, 2300, 2310, 2600, 2600V, 2610, 2810, 2910, 3000 3 Cyl 1965-1975, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 3610, 3900, 3910, 3930, 4000 3 cylinder 1965-1974, 4100, 4110, 4130 3 Cylinder 1990-1999, 4140, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 7100, 7200, 7600, 7700 Ford Industrial 230A, 231, 233, 234, 333, 334, 335, 340A, 340, 445. All JJAgParts items have been hand selected by our team and are continuously monitored for Quality. Should a craftsmanship or fitment concern be identified, JJAgParts will work with you to stand behind our products. JJAgParts is an American owned and operated family business. Here at JJAgParts, we strive for customer satisfaction. If you are not satisfied with your order, please contact us so we can make it right. Note OEM Part Numbers are for reference only and should be verified before purchase..

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, pushpull, manual, and self-adjusting clutches. Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines. Rugged construction will easily support the weight of heavy clutch discs. To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec. 2 inch O.D. shaft, 1-14 inch pilot, 10 splines, splines are 3.6 inches long similar to Ford 308-D003 D79T-7550-C.

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, pushpull, manual, and self-adjusting clutches. Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines. Rugged construction will easily support the weight of heavy clutch discs. To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec. 2 inch O.D. shaft, 1-14 inch pilot, 10 splines, splines are 7.3 inches long similar to Ford 308-D011 D93T-7550-B.

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, pushpull, manual, and self-adjusting clutches. Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines. Rugged construction will easily support the weight of heavy clutch discs. To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec. 1-34 inch O.D. shaft, 1 inch pilot, 10 splines similar to Ford 308-D010 D93T-7550-A.

Fits 26 spline x 1.1250 clutch disc applications with .590 diameter pilot bearing.. Made In The USA. LT LS Engines with T56 TR-6060 Transmissions.

ALIGNMENT TOOL.

Must have tool is needed when remove the bolts or mounts holding the motor and transmission together.. Precise clutch Alignment tool for checking clutch engagement of perfomance.. Correct properly center distance from crankshaft to the transmission input shaft to optimize belt life.. Simply remove your clutches and install this tool on the secondary shaft larger hole. Bolt the smaller hole end to the crankshaft with primary clutch bolt.. Fits for Polaris Ranger, RZR, General, XP2016-On.

Must have tool is needed when remove the bolts or mounts holding the motor and transmission together.. Precise clutch Alignment tool for checking clutch engagement of perfomance.. Correct properly center distance from crankshaft to the transmission input shaft to optimize belt life.. Simply remove your clutches and install this tool on the secondary shaft larger hole. Bolt the smaller hole end to the crankshaft with primary clutch bolt.. Fits for Polaris Ranger, RZR, General, XP2016-On.

SAE shaft and bushings to fit 8 SAE pilot bearing sizes.. Plated aligning cone with graduated 1 and 1 18 diameters for automatic fit to most clutch plates.. W1158P shaft bushings to fit 10 metric pilot bearing sizes. Tapered cone for all others.. Sizes SAE .590, .612, .624, .668, .749, .786, .808 .904. Plated aligning cone with graduated diameters for automatic fit to most clutch plates..

Convenient solution - ensure proper alignment during clutch installations and service with this handy alignment tool. Restores functionality - do the job right the first time with the right tool. Durable construction - this part is made from quality materials to ensure reliable performance and long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Includes seven fractional pilot adapters, one clutch disc centering adapter and one alignment shaft. Includes five metric pilot adapters, two clutch disc centering adapters and one alignment shaft. Blow-molded storage case.

Faster, Easier Replacement of Clutches. Align clutch plates and pilot bearings accurately. Fit Type Vehicle Specific. Included Components ShaftCone7 Adapters.

Precision Machined Steel Tool Provides Better Alignment. Open Ended Design Allows Progressive Loading Of The Clutch Pack.

Comes in skin-pack. Disconnects Ford hydraulic clutch lines. Easily disengages the hydraulic clutch line from the clutch slave cylinder on some Ford manual transmissions. Package Dimension 18.288 centimeters L x 7.62 centimeters W x 0.508 centimeters H.

Easy Clutch Installation Provides a quick and accurate way to align the clutch disc with the pressure plate and flywheel.. Durable Nylon Construction Made from tough, lightweight nylon that withstands repeated use without deforming.. Precision 1 23-Spline Design Correctly matches transmissions requiring a 1-inch, 23-spline input shaft for proper engagement.. Ideal for DIY or Professional Use Helps ensure smooth reassembly and prevents costly installation errors.. Convenient and Affordable Tool An inexpensive yet essential tool to speed up clutch replacement and improve installation accuracy..

Precise Clutch Alignment Helps accurately align clutch disc with pilot bearing for faster, easier manual transmission installation.. Spline Compatibility Designed for 1-18 26-spline input shafts verify spline outside diameter and spline count before use.. Durable Nylon Construction Made from tough nylon material for strength, reliability, and repeated use.. Easy Installation Tool Simplifies clutch replacement process by ensuring proper component positioning.. Workshop Essential Cost-effective tool ideal for automotive maintenance, repair, and drivetrain service applications..

Factory Replacement Feel. Factory Replacement Life. OEM Style. Recommended for street and race use. High Quality.

Factory Replacement Feel. Factory Replacement Life. OEM Style. Recommended for street and race use. High Quality.

Factory Replacement Feel. Factory Replacement Life. OEM Style. Recommended for street and race use. High Quality.

ACT.

OTC's Truck Clutch Flywheel Handler features a unique linkage design that raises the load from horizontal to vertical as the pump is cycled - eliminating any lifting of the clutch by the operator. Handles 14 inch and 15-12 inch clutch assemblies weighing up to 250 lbs swivel casters provide easy maneuverability includes a 2 inch splined shaft with a 1-14 inch pilot to aid in alignment. Minimum height of 15 inches allows access below side faring when raised, center line of clutch will be 38-14 inches off the floor. Unit features an open stance, for ease of access to the work, and a 360 degree swivel head. Overall footprint is 32-38 inches long by 24-12 inches wide.

Fitment For Polaris RZR XP 900. Material Made of premium CNC-machined aluminum for maximum durability and precise alignment. Ensures perfect clutch and belt performance. Ensure Smooth Clutch Performance Achieve perfect alignment to maintain peak clutch performance. Prevents vibration and power loss for a smoother ride. Feature Eliminate spacing issues between primary and secondary shafts. Drastically reduces premature belt wear and saves you money. Customer Service If you need any assistance, please contact us at any time.

Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep. Crown also supports its entire line with a 12 month12,000 mile warranty. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components.

WIDE COMPATIBILITY The 43300 pneumatic fan clutch wrench kit removal tool kit compatible with Ford, Chrysler, GM and Jeep, 4.3L, 5.0L, 5.7L GM pick up.. 7 DRIVING WRENCHES SIZES Clutch wrench kit includes 32mm, 36mm, 40mm, 47mm, 78'', 1-78'', 2'' driving wrenches, and 1x 17'' long handle with a storage bag. Please confirm the appropriate size before purchase.. EASY TO USE Just slip the tool into the air hammer select the correct wrench size for the fan nut and a couple of pops of the air hammer and the fan clutch is loose. No need for any other special pinning tools. Note Air Hammer is NOT included. HIGH QUALITY Wrenches are made of sturdy steel with black finish, ensures high strength and durability, great resistance to corrosion and rust.. EASY STORAGECARRY The blow-molded plastic case keeps everything well-ordered and easy to store or transport between jobs..

Precise Clutch Alignment Helps properly center the clutch disc with the pilot bearing to ensure quick, accurate clutch and pressure plate installation.. 1-18 Inch 10-Spline Fitment Designed to match common manual transmission input shaft specifications with a 1-18 diameter and 10 spline count.. Durable Nylon Construction Made from tough nylon material that provides strength while remaining lightweight and easy to handle.. Simplifies Clutch Installation Prevents misalignment issues that can make transmission installation difficult, saving time during clutch service.. Universal Workshop Tool Ideal for automotive repair, performance builds, and garage maintenance when installing manual transmission clutch assemblies..

Simple Clutch Installation Helps accurately center the clutch disc during assembly, ensuring smooth and trouble-free transmission installation.. Durable Nylon Construction Made from tough, lightweight nylon that withstands repeated use without damaging clutch components.. Precision 1-38 Inch 10-Spline Fit Designed specifically for clutches using a 1-38 inch, 10-spline input to guarantee proper alignment.. Time-Saving Design Eliminates guesswork and reduces installation errors, making it an essential tool for professionals and DIY mechanics.. Universal Shop Essential Ideal for engine swaps, clutch replacements, and gearbox servicing where accurate clutch alignment is critical..

Easy Clutch Installation Simple, accurate way to align the clutch disc to the pilot bearing for smooth and hassle-free transmission installation.. Precision Fitment Designed for applications using a 1-116 inch, 10-spline input shaft to ensure proper centering every time.. Durable Construction Made from tough, lightweight nylon material that resists wear and provides long-lasting reliability in the shop or garage.. Time-Saving Tool Helps prevent repeated installation attempts by keeping the clutch disc perfectly positioned during assembly.. Universal Utility Ideal for engine swaps, clutch replacements, and transmission service on vehicles that require a 1-116 inch, 10-spline alignment tool..

Include SAE and Metric. it's a must have tool for replace clutch. Align single disc clutches on most vehicles, light truck tractors. Properly aligns clutch plate by tapered cone fitting into pilot bushing or bearing. Material aluminum.

Fits 2016-22 RZR XP 1000. Fits 2016-22 RZR 1000S. Fits 2016-22 General and General XP. Fits 2017 Ranger XP 1000. Fits 2018 Ranger XP 1000 Crew only. Designed by Top Engineers to ensure an accurate measurement. Tool sits on Crankshaft and Transmission Shaft of a CVT Clutch. Corrects Shaft Spacing.

High-Quality Material Clutch to hole corrector alignment tool is made of high quality PVC material, high strength, sturdy and durable to use, wear-resistant and anti-strike, not easy to age. It is made in accordance with standards, strictly implement factory quality control, stable performance with long service life and no need to change frequently.. Practical Function Manufactured according to the original factory specifications. Strict quality standards to ensure good quality, use up powerful, and assured. It is not easy to damage the device and avoid unnecessary loss. Allows for manual fixing centering and applying the clutch disc to the pressure plate in cars and trucks during installation.. Simple Operation Thread the funnel wheel onto the centre body, with ribs facing the same direction as those on the fixed wheel that is the smooth side of the wheel facing away from the fixed wheel. Select the suitable collect, depending on clutch size, and slide onto the centre shaft. Insert centre shaft and collect through centre body and thread small wheel onto the end of the shaft.. Universal Fit Clutch alignment tool installer fits for most cars and light vans up to 5tons gross not suitable for Minis or vehicles with double plate clutches. Also suitable for front wheel drive vehicles. Supplied with 2 different sized expanding collets. Practical and convenient to use.. After-Sales Service We are committed to providing high-quality products and intimate services. This has been thoroughly quality tested before shipping to ensure product perfect. If you have any questions about our products, our professional customer service team will solve your problems in time..

Precision Machined Steel Tool Provides Better Alignment. Open Ended Design Allows Progressive Loading Of The Clutch Pack.

See fitment guide image for additional Machines this item fits Main Cross Members Only. Requires Engine and Transmission shafts. Main Cross Members Only.