Heater hose compatible with enclave 2008-2017, acadia 2007-2017, traverse 2009-2017, outlook 2007-2010. Replacement part number 20765678, 25862087, 25862088, 626-562. Made from plastic PA66 T-shaped connectors and rubber material. A slight odor upon receiving the heater hose is normal. Please open the packaging and air it out for 1-2 days. Easy to install direct replace. We sincerely appreciate your purchase of engine heater hose set and the trust and support of iKer. Your satisfaction is our responsibility and honor.

EXTREME HEAT ABRASION PROTECTION Protects hoses, fuel lines, wiring, and cables from heat damage, friction, and wear that lead to premature failure.. REFLECTS RADIANT HEAT UP TO 2000F Aluminized outer layer reflects intense radiant heat while withstanding direct heat up to 500F, helping maintain cooler operating temperatures.. PROTECTS AGAINST OIL, CHEMICALS DEBRIS Shields lines and hoses from oil, fuel, chemicals, dirt, grease, and road grime commonly found in automotive and industrial settings.. EASY SLIP-ON INSTALLATION Simply disconnect the line or hose, cut to length, slide on, and reinstallno special tools required.. HEAVY-DUTY, FIRE-RESISTANT CONSTRUCTION Built with 19 oz high-temperature fiberglass insulation bonded to a durable aluminum outer layer for long-lasting thermal protection..

Size 58 Heater hose ID 58 16mm, ID Tolerance 0.3mm Hose OD 0.9424mm, OD Tolerance 0.3mm Hose Length 5 Feet.. Parameter Working Pressure 103 psi Burst Pressure 300 psi Temperature Range -65F to 350F -54C to 177C Minimum Bend Radius 80mm. Meets SAE 20R3 Class A requirements.. Material The heater hose is constructed with braided polyester fiber and silicone inner and outer layers. Compared to EPDM material, silicone withstands a greater temperature range and lasts longer.. Application Transport air, steam, water, coolant, weak acid and alkaline. Suitable for automotive cooling systems, heating systems, water heaters, etc.. Note Silicone heater hose is not for carrying alcohol, fuel, engine oil, or lubricants..

High Temperature Resistance Our heat-shrinkable braided tubes withstand extreme temperatures from -31F to 284F, and their heat and cold resistance provides excellent protection ensuring that cables and wires remain well insulated for optimal performance. Rugged Durability Heat Shrink Braided Sleeving is made of polyolefin and polyester even at high temperatures its robust construction offers excellent abrasion resistance, heat resistance and tightness to ensure reliable protection for cables and wires. 2 in 1 Shrinkage Ratio Our flexible braided shrink tubing shrinks to 12 its original diameter to accommodate objects at various angles and provide secure termination protection for wire harnessbraided sleeving projects. Protect yourself and your equipment. Protector and Installation Braided cloth heat shrink tubing is insulation it is very easy to install,just make sure the size of the wire being protected is smaller than the shrink tubing,and then a heat blower heats it up to shrink it into place. Versatile CompatibilityOur flat woven fabric heatshrink tubing can accommodate a wide range of cable sizes and configurations,whether you need to protect Ethernet cables, power cords,or audio video cables,designed to provide a snug fit and optimal protection for various cable sizes.

Compatible With LS LT Swap Gen III, IV, V. Hose Ends 58 and 34. Heater Core Delete Water Pump Bypass Hose. Compatible With GM Pontiac LS LSX LS1 LS2 LS3 LS6 LS7 LT1 LT4. Easy to Clean Oil, Coolant and Fuel-Resistant Finish.

Quality replacement - this heater hose connector matches the fit and function of the original equipment connector. Durable construction - this heater hose connector is made of quality materials for a precise fit and leak-free durability. Century of experience - for over 100 years, Dorman Products has provided quality automotive replacement parts to its customers. Performance tested - this connector has been rigorously pressure tested to ensure reliable performance. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle..

Upgraded Aluminum Alloy Our upgraded aluminum heater hose adapter is made of high-quality aluminum alloy material, which is lightweight and durable. Provides improved heating performance and offers a longer service life.. Outside Diameter 34 in19mm. Compatible with NISSAN 370Z with VQ37VHR engine 2009-2017 Infiniti M37 with VQ37VHR engine 2011-2013 M37 with VQ37VHR engine 2011-2013 M37 with VQ37VHR engine 2011-2013 Q50 with VQ37VHR engine 2014-2015 QX50 with VQ37VHR engine 2014-2017 Q60 with VQ37VHR engine 2014-2016 Q60 with VQ37VHR engine 2014-2016 Q70 with VQ37VHR engine 2014-2017 QX70 with VQ37VHR engine 2014-2017 G35 with VQ35HR engine 2007-2008 G37 with VQ37VHR engine 2009-2013 M35 with VQ35HR engine 2012-2013.. Compatible withInfiniti EX35 with VQ35HR engine 2008-2012 EX37 with VQ37VHR engine 2013 M35 with VQ35HR engine 2012-2013 FX35 VQ35HR engine 2009-2012.. Replace Part Number 92417JK20A, 92417-JK20A, 92417 JK20A, 924 17 JK 20 A, 92 41 7J K2 0A.. Improved Performance The upgraded aluminum coolant heater hose fitting can withstand higher temperatures and pressures without damage, maintaining a reliable and consistent seal that reduces leaks and improves heating performance. The improved durability of this connector can also help to extend the life of your vehicle's heating system.. Direct Installation The installation of the coolant heater hose coupler is simple. Just replace it directly..

Upgraded repair - this HVAC cooling hose quick connector is manufactured from rugged metal and is designed to help provide a longer lasting repair than the original equipment plastic connector. Prevents leaks - engineered to resist the heat and abrasion that can eventually cause a plastic cooling hose quick connector to crack and fail. Direct replacement - manufactured to precise standards for a seamless fit on specified Cadillac, Chevrolet and GMC vehicles. Performance tested - this upgraded connector design has been rigorously pressure-tested for reliable performance. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle.

Upgraded repair - this HVAC heater hosecoolant hose connector is manufactured from rugged metal and is designed to help provide a longer lasting repair than the original equipment plastic connector. Prevents leaks - engineered to resist the heat and abrasion that can eventually cause a plastic hose connector to crack and fail. Direct replacement - manufactured to precise standards for a seamless fit on specified Cadillac, Chevrolet and GMC vehicles. Performance tested - this upgraded connector design has been rigorously pressure-tested for reliable performance. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle.

Compatible With This throttle body inlet heater pipe fits 20092011 Chevrolet Aveo, 20092011 Aveo5, 20092010 Pontiac G3, 2009 Pontiac G3 Wave, 20112015 Chevy Cruze, 2016 Cruze Limited, and 20122018 Chevy Sonic 1.6L1.8L engines.. Replace OE The throttle body heater hose replaces original part numbers 25192905,25192904,55354563, 5826487, 5826481, and55569809 , ensuring proper fit and performance.. High Quality The throttle body inlet pipe Made from durable materials that resist cracking and leaking under high-temperature engine conditions, ensuring long-lasting performance.. Function The throttle body hose Maintains consistent coolant flow through the throttle body for improved thermal efficiency and prevents engine overheating.. Package include 1 Throttle Body Heater Inlet Pipe everything needed for quick and easy installation without special tools..

PREMIUM MATERIAL The silicone vacuum hose, made of high temp reinforced silicone, is a solid silicone tubing, which has no irritating odor and has high heat resistance with no collapse. The silicone tube is not easy to twist and deform.. HIGH PERFORMANCE The vacuum line has a wall thickness of 0.12inch 3mm, whose working pressure is 43PSI, and burst pressure is 100PSI at high temperature, 130PSI at room temperature and which can work greatly at a temperature of -40 to 392. The FDA food grade silicone hose, which is safe, is vulcanized with platinum.. APPLICATION The silicone hose is mainly used for air and water transmission in engines, but not for fuel, oil and coolant. In addition, it can be used for food equipment, watering irrigation, experimental equipment and industrial equipment.. DIMENSIONS The length is 10FT 3.05 meter. Please see product images for more detailed size information and check the size carefully before buying.. WHAT YOU GET A piece of silicone vacuum hose. Please contact us if you have any problems, we are pleased to serve you..

Dimension Inner Diameter 1.5740mm , Length 5 Feet 1.5 m. Note the size is measured by manual ,there may not be very exactly. Application Designed of standard silicone rubber coated fiberglass. Quality material to protect good heat insulation for hose wires fuel lines. Widely used to protect and bundling fuel lines, hydraulic and oil lines from high temperatures and to prolong the life of wiring and hoses. Withstand High TempOperating Temp -60 C degree - 260 C degree, Flammability VW-1, Inner Sleeve Fiberglass, Coating Material Silicone. Please note that silicone may have a slight odor when subjected to high temperature heating, which is a normal phenomenon. Easy to UseEasy to instal, Ideal for protecting hoses, electrical wiring, oil and fuel lines from heat and to prolong the life , helps to prevent vapor lock, protects wires from melting. Lifetime Service BSTFLEX Lifetime Warranty Certifications and tests for BSTFLEX fire sleeve MSHA, -60 degree C Test, 260 degree C test, UL 1441 test, ROHS, REACH. Meets DIN EN45545-22020 Rail Certificateion, DIN 45545 Low smoke toxicity, DIN 548375510-2 Rail vehicle certificated for resistant to combustibility, NF EN ISO 11925-2 15 AND 30 SEC, TBT 3138-2018 Technical specification of flame retardant materials for railway locomotive and vehicle, 800C for 30 min they mentioned test GL - Germanischer Lloyd, Molten Splash Test BS EN 373, Abrasion test BS EN 388, Oil resistance BS EN ISO 6530, Tensile Strength test BS 2576, Thermal Conductivity ASTM C177.

38 ID 10 foot Roll. Premium Silicone Construction Made from high-grade silicone for superior flexibility, durability, and resistance to cracking or hardening over time.. High-Temperature Resistance Performs reliably in extreme environments withstands temperatures from -65F to 500F -53C to 260C.. Flexible Easy to Install Smooth interior and reinforced design allow for easy routing in tight engine bays and custom setups.. Automotive Industrial Use Ideal for heater core plumbing, coolant transfer, turbo intercooler connections, and custom engine builds.. Long-Lasting Performance Resistant to ozone, UV, and a wide range of automotive fluids designed for years of trouble-free service..

Designed for use with 34 Silicone Heater Hose.

5Q0121087A, 34 x 34 x 12 Straight Joint Fitting, Radiator Coolant Hose 3 Way Connector,Heater Lap Y-Joint,Water Pipe Splitter Kit for Chevrolet,Ford,F-150,Ram,GMC,Jeep,Cadillac,Buick,Dodge,Chrysler,Audi,Benz,BMW,VW, 19mm-19mm-13mm, 34inch-34inch-12inch.. Works with radiators, heater cores, and aftermarket cooling systems.. Made from high-grade EPDM rubber -40F to 320F, this T-connector resists cracking, corrosion, and coolant degradation for years of reliable performance.. 3 Way Radiator Coolant Hose Connector Size 34 x 34 x 12 OD.. Replace worn parts before they cause engine damage.

PRODUCT SPECIFICATIONPackage contains 6pcs silicone vacuum tubing hose, each 5 feet 1.5 meters long, with inner diameters of 3 mm 18, 4 mm 532, 5 mm 316, 6 mm 14, 8 mm 516, and 10 mm 38 respectively. 1 of each size, with 18 3 mm wall thickness.. HIGH QUALITY SILICONE MATERICALOur vacuum silicone hose is made of high temperature reinforced silicone to ensure strength and durability. The silicone material has no irritating odor, has high heat resistance, is not easy to twist and deform, has a smooth surface, is soft and tough, and has a long service life.. WIDE APPLICATIONThis automotive vacuum hose is ideal for general purpose air and water transport within the engine compartment. Ideal for custom turbocharger or intercooler duct fabrication, DIY air intake or radiator cooling systems in automotive plumbing, marine and industrial environments. NOTE Not for use with fuel, oil or coolant.. HIGH STRENGTH VACUUM TUBEOur vacuum hoses are designed with 3mm thick walls to work properly in high pressure environments and are suitable for extreme temperature ranges from -76F to 392F -60C to 200C. They are quality tested to ensure long-lasting performance and can connect and replace various pipes even in high temperature environments such as engines. The working pressure can reach 43PSI, and the burst pressure is 100PSI at high temperature and 130PSI at room temperature. It can work normally in various extreme weather or environments, so you can use it with confidence.. EXCEPTIONAL CUSTOMER SREVICEAt ZIQOPGD, we prioritize both the quality of our products and the satisfaction of our customers. If you have any questions or need assistance, please dont hesitate to reach out to us. We are here for you 247.

Size The 3-in straight fitting with a 34-in hose nipple and 12-in pipe thread for the water pump. The 1-34-in straight fitting with a 58-in hose nipple and 12-in pipe thread for the intake manifold.. Upgraded 304 Stainless Steel Our heater hose threaded connector is made of 304 stainless steel, which has excellent corrosion and high-temperature resistance, ensuring durability in harsh engine environments. They offer strong sealing performance to prevent leaks, along with good mechanical strength and anti-vibration capability.. Fit for The heater hose fittings fit for Chevrolet SBC engines 283 305 307 327 350 383 400.. Easy Installation First, ensure the engine is cool. Remove the old connector, clean the interfaces, and check for hose wear. Lubricate the new connector's ends, align and push it into place on the hose and component. Secure with clamps and tighten. Finally, refill coolant and test for leaks.. Package Included 1 34 Water Pump Fitting, 1 58 Intake Fitting..

Direct replacement - this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles.MaterialAluminum. Restores functionality - reliable replacement for an original hose that has failed due to heat or vibration. Durable construction - this part is made from quality materials to ensure reliable performance and long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Aluminized Heat Shield Sleeve Sheath BuyUneed aluminized wire heat shield sleeve is made of smooth fiberglass and aluminum foil. can be used it in so many areas of automotive wires, cables, and spark plug wire, fuel liner for heat protection and keep the heat out of places. Solve Fuel Vapor Lock Problem Closed structure heat wire wrap shield sleeve with better heat barrier and insulation protection functions. fit Solve fuel vapor lock problem caused by engine heating up.Help keep things alive longer, spark plug wire sitting on a hot header. Heat Protection,Durable Heat shield wrap sleeve outer materialaluminum with water, oil, tear resistance, radiant heat, and functions features. Wire heat shield sleeve operating temperature - 40 - 500 and capable of reducing up to 85 percent per radiant heat. Softer, Flexible, Easy to Use Choose BuyUneed wire heat shield roll, excellent softer, flexible, and light-weight performance is more applicable to automotive organize and protects the brake cablefuel linespark plug. Installtion Tips 1 x Aluminized sleeving heat sheathing. choose the right specification and size length, easier to slide wires into the tube sleeve though.Please wear protective tools such as safety glasses, dust masks, gloves, and long sleeves opening and during installation.

Manufactured in the USA - 100 Satisfaction Guarantee. .160 Wall Thickness - Nearly 3x the thickness of cheap hose.. Extreme Temperature Resistance with Superior Flexibility -65F 350F More on Temp rating below.. Meets or Exceeds all SAE J20 R3 Class A TMC RP303B Class I Grade II Certifications. Actual Burst Pressure 300psi SAE J20 R3 200psi.

Designed for use with 58 ID Silicone Heater Hose.

Quality replacement - this heater hose connector matches the fit and function of the original equipment connector. Durable construction - this heater hose connector is made of quality materials for a precise fit and leak-free durability. Cost-effective solution - offers original equipment quality at competitive price. Performance tested - this connector has been rigorously pressure tested to ensure reliable performance. Support available - every Dorman part is backed by Dorman's technical support team.

Choose Length Example Qty 1 1 ft Length, Qty 3 3 ft Length, Qty 12 12 ft Length. 58 Blue Silicone Heater Hose. Inside Diameter ID 0.63 16mm Outside Diameter OD 0.96 24mm. -65F -54C to 350F 177C. Actual Burst Pressure 300 PSI SAE J20 R3 250 PSI.

Compatibility Information Product is compatible with Chevrolet GM Pontiac LSX LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LT1 LT4. Replacement OE 551699. Please confirm your model number before purchasing to ensure product compatibility.. Durable Material Made of sturdy rubber, this ls heater core bypass hose cooling crossover with clamps stays firm without breaking or deforming, offering long-lasting resilience and reliable heat resistance. It helps keep the cooling system flowing smoothly for a better driving experience.. Heat-resistant Performance The rubber build of this car heater core crossover cooling water bypass hose connector handles high temperatures well, maintaining flexibility and sealing strength under constant thermal changes. It supports stable cooling circulation to keep the system working properly.. Reliable Flexibility This u-shaped rubber heat-resistant and leak-proof hose with clamp is designed to withstand internal pressure and external bending, helping your system run safely and smoothly. It delivers dependable bypass flow with a compact U-shaped design. Keeps its shape while offering good bend recovery, ensuring consistent cooling direction in tight engine spaces. It supports a clean and simple crossover solution.. Steady Leak-proof Fit Built with firm rubber and matching clamps, this ls heater core bypass hose cooling crossover with clamps ensures a snug, leak-proof connection that helps protect the system during long-term use. It keeps cooling movement efficient and steady. Install by positioning the hose and fastening the clamps evenly.. Packaging Details You will receive 1 x U-shaped car heater core bypass hose, two clips. The inner diameter of one end of the product is 0.6, the outer diameter is 0.98, and the inner diameter of the other end is 0.75 and the outer diameter is 1.08..

Upgraded repair - this HVAC cooling hose quick connector is manufactured from rugged metal and is designed to help provide a longer lasting repair than the original equipment plastic connector. Prevents leaks - engineered to resist the heat and abrasion that can eventually cause a plastic cooling hose quick connector to crack and fail. Direct replacement - manufactured to precise standards for a seamless fit on specified Cadillac, Chevrolet and GMC vehicles. Performance tested - this upgraded connector design has been rigorously pressure-tested for reliable performance. Mechanic's choice - used and endorsed by professionals in the service bay.

Vehicle Fitment A-Premium heater hose assembly is compatible with Buick Enclave 2008-2017 Compatible with Chevrolet Traverse 2009-2017 compatible with GMC Acadia 2007-2017 compatible with Saturn Outlook 2007-2010. Reference Number 626-556, 626556, 20765678---You can select the YearMakeModel or other parameters of your car at the top of the list and click Confirm before purchasing. Check if this heater core hose assembly is suitable for your car. Specifications Material Aluminum And Rubber Length IN 11 End 1 Inside Diameter IN 0.686 End 2 Inside Diameter IN 0.84 End 3 Inside Diameter IN 1. Durable Construction This heater hose is made of perfect rubber and metal to withstand extreme temperature fluctuations and resist corrosion.. Buy with Confidence A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted HVAC heater hose assemblies. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind..

SET INCLUDES The hose clamp tool includes one screwdriver, rubber handle pipe clamp, cross clamp pliers, bend throat clamp pliers, single clamp pliers, tiger clamp pliers, fuel line separator pliers and radiator cable-type flexible hose clamp pliers. VERSATILE USE These professional automotive long reach hose clamp remover kit make it easy to disconnect electrical connectors and other tasks. The hose pliers can also be used for engine repair on cars, trucks and motorcycles to increase efficiency. EASY TO HANDLE The car hose removal tool handles are comfortable to the touch, reducing hand fatigue during prolonged use. Suitable for anyone working on automotive repairs, they are simple to use. PRODUCTION MATERIAL These hose clamp tools automotive are made of steel, making them easy to handle under harsh working conditions. THE HOSE PLIERS Used for tightening and loosening all kinds of pipe clamps, clips, and other connectors. Commonly used in automotive maintenance, machinery installation, and pipeline laying, it effectively improves connection efficiency and reliability.

Size 125mm, 3 Feet 0.9 meter length. Tightly braided fibers aluminum fiberglass heat shield sleeve. Continuous operating reflective temperature of 500 degree Fahrenheit. Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks spills, dirt, road grime and other underhood hazards. Helps to prevent vapor lock, lower air intake temperatures. Easy to trim to desired length. Better than heavy silicone tape, sleeves are lightweight, easy to install and easy to remove. Reflects over 90 of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit.

Size 3419mm ID, 3 Feet 0.9 meter length. Tightly braided fibers aluminum fiberglass heat shield sleeve. Continuous operating reflective temperature of 500 degree Fahrenheit. Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks spills, dirt, road grime and other underhood hazards. Helps to prevent vapor lock, lower air intake temperatures. Easy to trim to desired length. Better than heavy silicone tape, sleeves are lightweight, easy to install and easy to remove. Reflects over 90 of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit.

Package Includes1 x Premium Molded Heater Hose Part 18777. Function Premium Molded Heater Hose Fits compact engine compartments for coolant, water, and air transfer, Ideal for use as a warm air hose, coolant bypass hose, or water pump inlet and outlet hose,ensuring that the engine always runs in the optimal temperature range. Specifications Meets SAE Type 20R3 EC Class D-1 and D-2 specifications and maintains consistent performance over the -40F to 275F -40C to 135C temperature range, providing safe and reliable performance for engine cooling circuits. Material The Premium Molded Heater Hose is made of high quality synthetic rubber with excellent resistance to cracking, corrosion and aging. Easy to use The coolant hose can be installed directly and can be used without complicated operation, effectively saving your maintenance time..

Country Of Origin China. Model Number 87756. Item Package Dimension 0.63 L x 9.0 W x 8.0 H. Item Package Weight 9.0 lb.

Quality replacement - this heater hose connector matches the fit and function of the original equipment connector. Durable construction - this heater hose connector is made of quality materials for a precise fit and leak-free durability. Century of experience - for over 100 years, Dorman Products has provided quality automotive replacement parts to its customers. Performance tested - this connector has been rigorously pressure tested to ensure reliable performance. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle..

Pliable Heat Sheath - Aluminized Sleeving and Fabric Material to Reflect Heat - With Ultimate Heat Shield Protection Barrier 34 x 36 3 Feet. Provides ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Withstands 500 degrees F direct, continuous heat and 2000 degrees F radiant heat. Constructed from a High temperature fabric and bonded to an aluminized material to reflect heat. Pliable for tight bends, trim to desired length.

Durable Aluminum Alloy ConstructionCrafted from premium aluminum alloy for superior strength, lightweight design, and excellent corrosion resistance ideal for long-term use in harsh automotive and industrial environments.. 90-Degree Elbow for Tight Spaces Designed with a smooth 90-degree bend to help route heater hoses neatly in compact engine bays or confined spaces without kinking or twisting.. Standard 12 NPT to 58 Hose Barb Compatible with a wide range of vehicles and machinery, featuring a 12 inch NPT male thread and a 58 inch hose barb for easy, secure connections to heater cores, water pumps, or intake manifolds. Leak-Free Performance Precisely machined threads ensure a tight, reliable fit. For best results, seal NPT threads with Teflon tape or thread sealant to prevent leaks under high-pressure coolant systems.. Wide Range of Applications Perfect for automotive engine swaps, custom cooling systems, marine cooling circuits, industrial machinery, and HVAC systems where efficient heater hose connections are essential.. High-Temperature and Pressure Resistant Engineered to handle typical coolant system temperatures and pressures, making it suitable for both stock and performance applications.. Easy Installation and Universal Fit Quick to install using standard tools. Fits most American vehicles, trucks, boats, generators, and custom mechanical builds requiring a 12 NPT to 58 hose connection..

Carton packed or on reels for customer convenience. Comes with protective sleeves to help duplicate GM OE designs for proper fit and function. Professional, premium aftermarket replacement. Provides the performance and dependability you expect from ACDelco. Manufactured to meet expectations for fit, form, and function.

Withstands Extreme Heat Made with aluminized finish which is flexible and durable woven silica, this Aluminized Adhesive Backed Heat Barrier can withstand scorching temperature above 2000 degrees Fahrenheit. Its reflective surface can still screen off the heat and provide utmost protection.. Easy-To-Apply Innovatively designed with adhesive composite on its back, application is made easier than ever. It can be easily wrapped or laid on to any desired surfaces with a professional-like finish also a penny-saver from hiring service.. Multi-Purpose Adhesive Backed Heat Barrier No matter what area of your Automobile or Home needs heat prevention this barrier can be of sure help. May it be plastic components, painted surfaces, hoses, firewalls, doors, hoods, and a lot more.. Reflective Aluminized Heat Shield Capable of reflecting 90 of radiant heat. Package Inclusions 1 x A-Team Performance 13575 Adhesive Backed Aluminized Fiberglass Heat Shield Barrier Up To 2000 Degrees Fahrenheit Multi-Purpose Compatible with Firewall Hoods Hoses and Doors 12 x 24.

4 feet long, can be easily cut to length. Fits 58 inch fittings. High-quality nitrile rubber hose. Reinforced with a single ply of braided cord. 304 grade stainless steel braid.

Quality replacement - this heater hose connector matches the fit and function of the original equipment connector. Durable construction - this heater hose connector is made of quality materials for a precise fit and leak-free durability. Century of experience - for over 100 years, Dorman Products has provided quality automotive replacement parts to its customers. Performance tested - this connector has been rigorously pressure tested to ensure reliable performance. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle..

Package Dimensions 30.226 H x 3.556 L x 24.257 W centimetres. Country of Origin Mexico. Fit type Vehicle Specific. Package Weight 0.295 kilograms.

Direct replacement - this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications. Restores functionality - reliable replacement for an original part that is leaking or has failed due to corrosion. Durable construction - this part is made from quality materials to ensure reliable performance and long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Good resistance to high temperatures for extended periods of time, which prolongs service life. Convenient 6-ft. lengths in self-service, reusable, recyclable package that can be displayed on pegboard. Meets SAE 20R3 Standard Wall Class D-2 requirements. Temperature Range -40 Deg. F to 257 Deg. F -40 Deg. C to 125 Deg. C. Caution Do not use for fuel or oil transfer applications. Inside diameter dimensions are .625 .625 inches.

Superior Size and Material The air conditioning bulkhead size is 1-6 58in-18 with a 6061- billet aluminum alloy construction, ensuring high reliability and a longer lifespan.. Improved Performance With exquisite production quality, this bulkhead fitting offers superior performance and higher work efficiency for added convenience.. Versatile Compatibility Suitable for all common oem and aftermarket air conditioning and heater systems, making it a replacement for classic, hot rod, performance, and vehicles.. Heater Port The heater port size of 3-10 78in-14 ensures a fit and functional replacement in various automotive applications.. Efficient Design Enhance your vehicle's air conditioning system with this bulkhead hose fitting, designed to deliver optimal results and durability for a seamless performance experience..

Designed to withstand elevated temperatures, these Hoses are Nylon-reinforced. Have a temperature range of -65 degrees F to 350 degrees F. Well-suited for coolant fluid service, and vacuum Line service.

Provides a fast, easy way to connect replacement heater hoses on cars and trucks. Three sizes for more coverage and broader applications. Its design retains O-rings for added durability. Professional, premium aftermarket replacement , Provides the performance and dependability you expect from ACDelco and Manufactured to meet expectations for fit, form, and function. Designed to deliver trouble-free, consistent performance.

Good resistance to high temperatures for extended periods of time, which prolongs service life. Convenient 6-ft. lengths in self-service, reusable, recyclable package that can be displayed on pegboard. Meets SAE 20R3 Standard Wall Class D-2 requirements. Temperature Range -40 Deg. F to 257 Deg. F -40 Deg. C to 125 Deg. C. Caution Do not use for fuel or oil transfer applications.

Silicone heater hose can operate at temperatures ranging from -58F to 392F -50C to 200C and handle pressures up to 101 PSI. Ideal for engine inletoutlet systems and cooling applications.. Constructed with a thickened, reinforced design, this hose offers exceptional durability and flexibility. It is wear-resistant, ensuring a long service life even under harsh conditions. Perfect for applications requiring both strength and flexibility.. Suitable for various automotive uses, including water tubing, heating hoses, vacuum lines, and more.. Easy Installation Simple and straightforward installation process. Just prepare the appropriate size of silicone vacuum tube, remove the old hose, and install the new one.. Important Note Not Fuel or Oil Resistant While this hose excels in high-temperature and high-pressure environments, please note that it is not resistant to fuel or oil. Ensure proper use in compatible systems to avoid damage..

Delivers fresh air for heater system. Fan shroud to Heater box. Aluminum finish. Pre-sized. Easy to install.

Size 34 inch. Material Plastic, Rubber. Color Black.

Package Dimensions 21.8 H x 2.5 L x 21.6 W centimetres. Country of Origin Mexico. Fit type Vehicle Specific. Package Weight 0.318 kilograms.

Package Weight 1.3 pounds. Fit type Vehicle Specific. Package Dimensions 7.4 L x 29.7 H x 23.5 W centimeters. Country of Origin Mexico.

Premium Hose Pliers Set Our 9PCS mechanic tools set includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver and a hose hook. Hose Clamp Tool This fuel oil water hose auto tools works with plastic and metal hose clamps from 1116 inch to 2 12 inches. This is a great set of hose clamp pliers for anyone who works on cars, whether it be a professional mechanic or just someone whos trying to repair their own vehicle. Locking Design Professional long reach hose clamp pliers set has everything you need to take apart an engine. The 5 spring clamp-compatible pliers are capable of locking in place to free your hands and speed up your repair work. Wide Application Our automotive hose clamp pliers set ensures easy repair and replacement of fuel, oil, and water hoses in car, truck, and motorcycle engines. The set includes a hose clamp tool box carrying case, featuring carrying handles for easy transportation and storage. Premium Materials Our electrical disconnect pliers are constructed from structural steel, the easy-grip rubberized handles are easy to use.

Extreme Heat Protection - Withstands radiant heat up to 2000F, making it ideal for high-temperature environments where heat protection is critical for preventing component damage and performance issues.. Pro-QGrade Quality - Constructed with 1 mil aluminized material bonded to woven glass fiber backing, combining lightweight flexibility with durable thermal resistance for long-term reliability.. Durable Adhesive Backing - Features a strong self-adhesive backing that ensures quick, secure installation on a wide range of surfaces without the need for extra tools, clamps, or fasteners.. Multi-Purpose Use - Perfect for wrapping and insulating wires, cables, fuel lines, hoses, and even seams or panels, offering versatile protection in automotive, industrial, and household settings.. Components Parts Protection - Helps reduce heat soak and protect sensitive parts from thermal fatigue, contributing to improved safety, efficiency, and longevity of components in demanding applications..

Product Features Adhesive heat shield, Working temperature -40C to 150C Heat insulation performance 100C Thermal insulationGreat protection in high temperature environmentsOil resistance good. Material Side Entry Sleeve with 25 Overlap Material aluminum foil fiberglass polyester. Widely used Use for heat insulation high temperature resistance for automotive and insdustrial applications. Cable harnesses, cable and wire bundles, hoses, heat shield tubing, heat wrap for wires, heat resistant wire wrap, wire insulation sleeve, fuel line heat shield sleeve, heat reflective sleeve, heat resistant wire loom, heat shield wire sleeve. Tips Please stay away from open flames. Our self-wrap heat shield sleeve is very convenient and fast, please check the size and pictures carefully before buying. If you have any questions, please contact us, we will be happy to provide you with the best service.. What will you get Set includes 1x self-wrap heat sleeve wire.

Compatible Models Fit for Jeep Grand Cherokee 2.4L 2014 2015 2016 2017 2018. Fit for Chrysler 200 2.4L 2015 2016 2017. Replace 68199254AB 68199254AA 68104972AA 52014624AA 68192082AA 52014627AB. High Quality Materials and Durability This HVAC heating system hose set is made of high-strength rubber and heat-resistant materials, designed to withstand high temperature and high pressure environments, ensuring long-term use without aging, cracking, or leakage, effectively extending its service life. Improving the Performance of Air ConditioningHeating Systems The tightly sealed design effectively prevents air leakage from the heating system, ensuring efficient heat transfer, restoring the vehicle's air conditioning heating function, and ensuring winter driving comfort. Complete Set Each set includes 4 key hoses supply and return air duct combination, which can solve the replacement needs of multiple parts at once and can be installed without modification, improving maintenance efficiency. Strict Quality Inspection Each hose undergoes pressure testing and size verification to ensure that the inner diameter and length are consistent with the original factory specifications, and there is no looseness in the fit after installation.

Buyer Notice We offer two lengths of flexible exhaust pipe for you to choose from, 59 inches and 47.2 inches respectively, both with 1 inch inner diameter. And matching 2 clips for your daily use. Please check the product size before purchase. Power Upgrade The well-designed exhaust pipe has a reasonable pipe diameter and smooth inner wall, which can effectively reduce the exhaust resistance. This not only helps to improve the efficiency of the car heater, but also reduces fuel consumption. Excellent Sealing When you connect the stainless steel pipe with other pipe, you can use the clamp to fix the two ends tightly, which can form a reliable sealing structure and greatly reduce the noise and vibration generated by the equipment when working. Quality Material Exhaust tubing is made of high-strength stainless steel, which can withstand high temperature, high pressure and various harsh environments. In the process of long-term use, it is not easy to appear deformation, rupture and other problem. Wide Application Diesel heater parts are suitable for most vehicles equipped with air diesel heaters, such as cars, trucks, motorhomes and so on. Flexible ducting can be extended in sufficient length to allow installation in multiple angled positions.

Withstands Extreme Heat Made with aluminized finish which is flexible and durable woven silica, this Gold Aluminized Adhesive Backed Heat Barrier can withstand scorching temperature above 2000 degrees Fahrenheit. Its reflective surface can still screen off the heat and provide utmost protection.. Easy-To-Apply Innovatively designed with adhesive composite on its back, application is made easier than ever. It can be easily wrapped or laid on to any desired surfaces with a professional-like finish also a penny-saver from hiring service.. Multi-Purpose Adhesive Backed Heat Barrier No matter what area of your Automobile or Home needs heat prevention this barrier can be of sure help. May it be plastic components, painted surfaces, hoses, firewalls, doors, hoods, and a lot more.. Reflective Gold Aluminized Heat Shield Capable of reflecting 90 of radiant heat. Package Inclusions 1 x A-Team Performance Gold Adhesive Backed Aluminized Fiberglass Heat Shield Barrier Up To 2000 Degrees Fahrenheit Multi-Purpose Compatible with Firewall Hoods Hoses and Doors 12 x 24.

No logo, 90 Degree Elbow Coupler, ID 12 13mm, Leg Length 3.5 90mm, Made of High Temp Reinforced Pure Silicone. Temperature resistance -76F to 482F -40C to 250C. 80 PSI Maximum pressure rating. 0.18inch 4.5mm wall thickness. 3-ply polyester reinforcement construction. Product meets SAEJ20 standard. Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system UV and ozone resistant.

Plastic Material This car heater inlet hose joint is made of plastic material, with stable structure and medium, resistant to high temperature and high pressure, not easy to break and deform during long-term work, and maintains a long service life.. No Leakage This connector is of good workmanship and manufactured according to the original parts specifications to ensure a precise fit and no leakage. It plays an important role in the car's cooling system and ensures that the car can run safely and efficiently.. Compatible Models This tee hose is Compatible with Select Cadillac Chevrolet GMC Models. Replacement parts are 15055343 15055342. It is recommended that you carefully compare the car model with the picture to ensure correct installation before ordering.. Features This hose joint can guide the cooling water back to the engine, thereby keeping the engine within a reasonable temperature range and ensuring its normal operation. At the same time, it can also protect the engine.. Product Details The package includes 2 pieces of car heater inlet hose tee connector, which can directly replace the original broken connector with poor seal, making installation more convenient. This product has been performance tested before shipment to ensure that you get a perfectly qualified product..

EXTREME HEAT ABRASION PROTECTION Protects hoses, fuel lines, wiring, and cables from heat damage, friction, and wear that lead to premature failure.. REFLECTS RADIANT HEAT UP TO 2000F Aluminized outer layer reflects intense radiant heat while withstanding direct heat up to 500F, helping maintain cooler operating temperatures.. PROTECTS AGAINST OIL, CHEMICALS DEBRIS Shields lines and hoses from oil, fuel, chemicals, dirt, grease, and road grime commonly found in automotive and industrial settings.. EASY SLIP-ON INSTALLATION Simply disconnect the line or hose, cut to length, slide on, and reinstallno special tools required.. HEAVY-DUTY, FIRE-RESISTANT CONSTRUCTION Built with 19 oz high-temperature fiberglass insulation bonded to a durable aluminum outer layer for long-lasting thermal protection..

EXTREME HEAT ABRASION PROTECTION Protects hoses, fuel lines, wiring, and cables from heat damage, friction, and wear that lead to premature failure.. REFLECTS RADIANT HEAT UP TO 2000F Aluminized outer layer reflects intense radiant heat while withstanding direct heat up to 500F, helping maintain cooler operating temperatures.. PROTECTS AGAINST OIL, CHEMICALS DEBRIS Shields lines and hoses from oil, fuel, chemicals, dirt, grease, and road grime commonly found in automotive and industrial settings.. EASY SLIP-ON INSTALLATION Simply disconnect the line or hose, cut to length, slide on, and reinstallno special tools required.. HEAVY-DUTY, FIRE-RESISTANT CONSTRUCTION Built with 19 oz high-temperature fiberglass insulation bonded to a durable aluminum outer layer for long-lasting thermal protection..

Choose Length Example Qty 1 1 ft Length, Qty 3 3 ft Length, Qty 12 12 ft Length. 1-14 Blue Silicone Heater Hose. Inside Diameter ID 1.25 32mm Outside Diameter OD 1.58 40mm. -65F -54C to 350F 177C. Actual Burst Pressure 200 PSI SAE J20 R3 175 PSI.

Wide Compatibility This Heater Inlet Hose Fitting is compatible with a wide range of vehicles, Compatible with including Cadillac Escalade 2002-2014, Compatible with Chevrolet Silverado 2000-2014, Suburban 2000-2014, Compatible with GMC Yukon 2000-2014, and more. It replaces part numbers 15055342, 15055343, 800-413, and 800-414.. Premium Plastic Material This Car Heater Hose Connector is made of high-quality ABS plastic, ensuring excellent structural stability, lightweight, and resistance to high and low temperatures. It is designed to withstand extreme weather conditions, preventing freezing and cracking, and ensuring long-term durability.. Easy Installation Simply remove the old connector and connect this T-Connector to the 2 fittings on the heater core at the firewall for inlet and outlet connections. Note Avoid using excessive force during installation to prevent damage to the heater core.. Reliable Safe The Heater Core Hose Connector features a completely sealed design with no burrs or cracks, ensuring a secure connection that prevents leaks and dislodgement. It has undergone rigorous stress testing to guarantee reliability and safety during use.. Cost-Effective Solution Instead of replacing the entire hose assembly, this Coolant Hose Junction allows you to directly replace a failed connector, saving you both time and money..

Max Temperature Rating 350F. Max Working Pressure 80 psi. Bend Radius 1-12. Meet and exceed SAEJ20 industry standards, great for marine and industrial use, custom turbo or radiator cooling system.. Silicone hose is NOT compatible with fuel or oil however, it is compatible with water and anti-freeze such as coolant.. High burst strength and excellent heat resistance.. High burst strength and excellent heat resistance..

304 grade stainless steel braid. High-quality nitrile rubber hose. Exceeds all oem requirements. Resists temperatures over 250 degrees.

4 feet long, can be easily cut to length. Fits 34 inch fittings. High-quality nitrile rubber hose. Reinforced with a single ply of braided cord. 304 grade stainless steel braid.

Universal application. 12 inch national pipe thread to 58 inch hose fitting x 1-34 inch barb. Triple chrome plated. 1-34 inches long.