Adaptation Models Compatible with Arctic Cat 250 1999-2001, Arctic Cat 300 1998-2000, Arctic Cat 400 2x4 4x4 1998, Arctic Cat 400 2x4 4x4 1999, Arctic Cat 400 2x4 4x4 Green Red 2000 2001, Arctic Cat 500 1998 1999. Replace Part Number Carburetor Replace 0470-348 0470-352 0470-362 0470-367. Package Include 1 X Carburetor, 1 X Throttle Base Cover, 1 X Fuel Filter, 2 X Fuel Line, 4 X Screw, 5 X Gasket. Easy Installation Direct Replacement, Easy to install. High Reliabilityand and High Sealing, Long Life Cycle. Friendly service If you have any questions, please contact us immediately.

Stability KEMIMOTO 2PCS ice scratchers snowmobile with a unique design is more stable and easier to use than other snowmobile scratchers. You just have to make sure the angle is set correctly and the ice scratchers will get enough bite. Fitment KEMIMOTO snowmobile ice scratchers kit fits all reverse and non-reverse gear equipped snowmobile snow scratchers Recommended for track heights 2-12 gear snowmobile scratchers. Excellent Performancen KEMIMOTO cable ice scratchers snowmobile reverse will clear a lot of snow and ice chips right where you need them and quickly cool the coolant temperature to return to normal. Durable Material Snowmobile ice scratchers universal are made of cemented carbide steel. Made of 716 galvanized steel wire rope. Great for hard-packed trails and don't break when you go in reverse. Package included 1pc Right gear snowmobile scratcher 1pc Left Carbide Ice Scratchers compatible with Ski-Doo ice scratchers compatible with Polaris snowmobile accessories.

EFFECTIVE COOLING - In extremely cold environments, traditional cooling systems may not effectively reduce engine temperature. These ice scratchers introduce cold snow and ice, significantly enhancing cooling efficiency to ensure the engine maintains a normal operating temperature. FITMENT - Fit all reverse and non-reverse gear equipped snowmobiles for one-bolt mounting. CABLE DESIGN - Scratchers have a cable design, offering high strength and flexibility. It can withstand prolonged use in snowy and icy conditions without easily breaking or degrading. FLEXIBLE INSTALLATION - The ice scratchers can be flexibly installed near the tracks, ensuring a good touch with the snow while not interfering with the normal operation of the snowmobile. TOUGH LONG LASTING - Almost indestructible 716 inch galvanized steel wire rope quality assurance. Note Periodically check that the bolts are tight. When not in use, secure the ice scratcher kit onto the track..

The Carburetor replacement for Arctic Cat 500 2004-2007. Replacement part number 0470-471. Package Includes 1 x Carburetor and other parts as shown in the picture. No instruction included, professional installation is recommended. If have any question about this item, contact us, we will try to answer all the question.

OEM Arctic Cat Part Number 2603-988. Gives precise control in any condition.. Reduces darting and plugging.. Features a single carbide runner.. Sold individually..

Dura Flex Ice Scratchers Kit.Improves Hifax life and engine cooling on hard packed snow. Universal Design Easily Mounts to Rails.Unmatched performance and weight.Works with all reverse and non-reverse equipped snowmobiles. Pre-assembled for one-bolt mounting.Virtually indestructible 716 zinc plated wire rope for increased down pressure.Improved crimps for greater hold.Hooks and stays on rail when not in use.Knurled mounting surface eliminates spinning and loosening on the slide rail.Hi-Roller recommended for track heights 2-12 and taller.All three tip designs are interchangeable with both cable lengths. Quantity - 1 Pair One Left side and One Right side.Reverse Compatible, Lightweight.Part 15-6425. Dura Flex Snowmobile Snow Ice ScratchersFits Polaris, Arctic Cat, Ski Doo, and Yamaha Snowmobiles.Hooks onto rails until you need them, Then simply unhook them when conditions make then necessary..

Dura Flex Ice Scratchers Kit.Improves Hifax life and engine cooling on hard packed snow. Universal Design Easily Mounts to Rails.Unmatched performance and weight.Works with all reverse and non-reverse equipped snowmobiles. Pre-assembled for one-bolt mounting.Virtually indestructible 716 zinc plated wire rope for increased down pressure.Improved crimps for greater hold.Hooks and stays on rail when not in use.Knurled mounting surface eliminates spinning and loosening on the slide rail.Hi-Roller recommended for track heights 2-12 and taller.All three tip designs are interchangeable with both cable lengths. Quantity - 1 Pair One Left side and One Right side.Reverse Compatible, Lightweight.Part 15-6425. Dura Flex Snowmobile Snow Ice ScratchersFits Polaris, Arctic Cat, Ski Doo, and Yamaha Snowmobiles.Hooks onto rails until you need them, Then simply unhook them when conditions make then necessary..

Dura Flex Ice Scratchers Kit.Improves Hifax life and engine cooling on hard packed snow. Universal Design Easily Mounts to Rails.Unmatched performance and weight.Works with all reverse and non-reverse equipped snowmobiles. Pre-assembled for one-bolt mounting.Virtually indestructible 716 zinc plated wire rope for increased down pressure.Improved crimps for greater hold.Hooks and stays on rail when not in use.Knurled mounting surface eliminates spinning and loosening on the slide rail.Hi-Roller recommended for track heights 2-12 and taller.All three tip designs are interchangeable with both cable lengths. Quantity - 1 Pair One Left side and One Right side.Reverse Compatible, Lightweight.Part 15-6425. Dura Flex Snowmobile Snow Ice ScratchersFits Polaris, Arctic Cat, Ski Doo, and Yamaha Snowmobiles.Hooks onto rails until you need them, Then simply unhook them when conditions make then necessary..

OEM Arctic Cat Part Number 2603-989. Gives precise control in any condition.. Reduces darting and plugging.. Features a single carbide runner.. Sold individually..

Ice scratchers snowmobile fits Polaris, Arctic Cat, Ski-doo, Lynx and other reverse non-reverse gear equipped snowmobiles which track heights above 2-12.. Ice scratchers consist of 716 galvanized steel wire rope with sharp carbide tips for effective snow removal hardened steel ends with improved mounting hardware for greater holding power.. Snowmobile scratchers enhance traction on icy surfaces, effectively clear snow with sharp carbide tips, and protect the engine and drive system by reducing snow accumulation.. GOMADEIT provides 3 years after-sales service, please contact GOMADEIT via email..

Bundle of 2 6 Stud Boy Deuce Bar Ski Carbide - Arctic Cat CAT-D2264-60.

6 Stud Boy Shaper Bar Ski Carbides - Ski-Doo Pilot Pair DOO-S2410-60.

Bundle of 2 4.5 Stud Boy Deuce Bar Ski Carbide - Arctic Cat CAT-D2264-45.

Fits 2007-UP Arctic Cat All Models Does Not Fit ZR120ZR200. Fits 2002-UP ZR Models F 567 Sabercat Crossfire. Fits 2006-UP M-Series Kingcat Bearcat Fits 2004-UP T660. The industrys most aggressive carbide runner Large 2 pieces of 60 deg Turning carbide on a 12 round host bar. Exclusive leading edge wear pad keeps steering carbide sharp longer and promotes longer bar life.

Fits 2007-UP Arctic Cat All Models Does Not Fit ZR120ZR200. Fits 2002-UP ZR Models F 567 Sabercat Crossfire. Fits 2006-UP M-Series Kingcat Bearcat Fits 2004-UP T660. The industrys most aggressive carbide runner Large 2 pieces of 60 deg Turning carbide on a 12 round host bar. Exclusive leading edge wear pad keeps steering carbide sharp longer and promotes longer bar life.

Comes standard with carbide tips..

Made from 316 thick polyethylene plastic. Molded for a perfect fit all sno-stuff ski skins are checked on a ski before being packaged. Provide custom looks, prevent ice and snow from sticking or freezing to skis, extend the life of the ski, increase fuel economy and improve performance. Same width as ski for minimal weight and friction. Drilled for stock wear bar use Polaris may require drilling one hole.

Stud Boy Deuce 4.5 Carbide Wear Bar Runner CAT-D2264-45.

Fitment For Polaris Pro - Steer, For Ski - Doo Pilot excluding Pilot SL, For Ski - Doo 2020 TS Ski, and For Arctic Cat 2015 - current Pro Lite, For Pro Climb, Pro Cross skis. It fits with any single runner in the industry with up to a 12 host bar and is also compatible with Woody's dual runners.. Ski Protection Protects new skis from wear and can fix slightly worn skis, extending the lifespan of your snowmobile skis.. Darting Reduction Reduces darting as the plate packs grooves, leaving runners with a fresh path, enhancing the stability and handling of your snowmobile.. Pair Sale Sold as a pair, ensuring you have the right amount of protectors for both skis of your snowmobile.. Easy Enhancement A simple accessory that can significantly improve the performance and durability of your snowmobile skis without complex installation processes..

Bundle of 2 6 Stud Boy Deuce Bar Ski Carbide - Arctic Cat CAT-D2093-60.

Bundle of 2 9 Stud Boy Deuce Bar Ski Carbide - Arctic Cat CAT-D2264-90.

The first major breakthrough in wear bar technology since the 1950s.

The first major breakthrough in wear bar technology since the 1950s.

Package Dimensions 88.9 Cm L X 13.97 Cm W X 1.777 Cm H. Product TypeAuto Part. Fit Type Vehicle Specific. Package Weight 2.25 Pounds.

Condition100 Brand New Excellent Quality Aftermarket Part. Compatible with the model of Yerfdog 150 Xmachine 125 2008 Hyosung gt250r 2006 Arctic Cat 400 4x4 FIS honda 200x 1982 Honda ATC-250R 1977 Yamaha R-D 400 Suzuki GSXR 600 GSXR750 2006-2010 and many other model. Distance between hole to hole1.8 inch 45mm. Package Included 1 X Alloy Rear Brake Master Cylinder Reservoir.

Install Size 45mm. It also fit Fit Yerf Dog 150cc Go Kart. Aftermarket parts.

Ski Model Old Plastic Ski see bolt pattern. Carbide Length - Center 4. Angle - Center 90. Package quantity Pair. Included U-blades No.

OMNITRAX 3.0 Korkers proprietary interchangeable sole technology allows for customized traction on the y. Compatible with every pair of Korkers OmniTrax 3.0 boots.. TRACTION Aggressive rubber lug sole with 30 replaceable carbide-tipped studs per pair. Ideal for extreme ice conditions such as ice shing and winter trekking.. CUSTOMIZABLE The Triple Threat Sole platform is a sticky rubber outsole with over-molded stainless-steel receptacles which accept any combination of Triple Threat spikes, bars, or hex disks.. Includes 30 pre-installed carbide-tipped studs that bite into smooth, slick surfaces ensuring long-lasting, positive traction in treacherous terrain..

Carbide runners are made of yg13 tungsten. All necessary fastening nyloc nuts included. Black, rust preventitive. Sold in Pairs. Recommended for use with lightly studded tracks or no studs.. Some models may require drilling.

Ski Model NA.