Size PTFE fuel 6an hose ID 516 0.31 inch. OD 0.45 inch. Length 16ft. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI. The AN6 PTFE fuel line fitting kit is ideal for high pressure applications.. Applicable Medium The 6AN E85 fuel line is compatible with all automotive fuels, lubricants, and coolants.. Notice The -6 PTFE stainless steel braided fuel line is relatively hard and can't be bent or folded in half. Professional installation is highly recommended.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications..

Size PTFE 6an fuel line ID 516 0.31 inch. OD 0.45 inch. Length 20 ft6 m. Please measure before purchase Includes as shown in the picture. Parameter PTFE fuel line hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium EVIL fuel line kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

The Size of 6AN 516 Inch Fuel Line Kit PTFE If you are installing this product for the first time, it is highly recommended to have it installed by a professional. Hose ID 516. Hose OD 0.465inch. Please confirm the size before purchasing. Working Parameter of 6AN PTFE fuel line Maximum Working Pressure psi 3000 psi. Bursting Pressurepsi 10000psi. Working Temperature Range -76 to 446-60 to 230PTFE. Including 6AN PTFE hose ends4 x Straight, 2 x 45 Degrees, 2 x 90 Degrees, 2 x 180 Degrees 1 x gloves, 1 x wrench and a 6AN braided fuel line Length 16 feet. Application PTFE E85 Nylon Braided 6AN Fuel Line Mostly worked with transmission fluid, coolant, oil, pump gas, diesel, and fuel. Support SINTLY offers a 3-month warranty for the 6AN fuel line kits. Please feel free to contact us via Amazon message.

Suitable for Widely Usage The PTFE nylon braided fuel line kit is mostly used in EFI LS systems. It can bu used as a fuel injection hose, LS engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carburetor fuel line, fuel return line, vapor return line, vacuum line, fuel supply line, turbocharger fuel line, and for other high-temperature and high-pressure applications.. Size The 6AN fuel line kit ID 516 0.31. OD 0.45. Please measure before purchase. Includes all components shown in the picture.. Working Pressure Working temperature range -76 to 446 -60 to 230. The maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI. The AN-6 nylon braided high-pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances.. Applicable Medium The PTFE fuel hose kit is compatible with all automotive fuels, lubricants, and coolants.. Notice The PTFE LS Swap EFI hose is relatively rigid and should not be bent or folded in half. Professional installation is highly recommended..

Size PTFE 6an fuel hose ID 516 0.31 inch. OD 0.45 inch. Length 20 ft6 m. Please measure before purchase Includes as shown in the picture. Parameter PTFE Line Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size 6an hose ID 0.31 inch. OD 0.45 inch. Length 10ft. Minimum bend radius 3.5 88.9 mm. Please measure before purchase Includes as shown in the picture. Parameter The hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Antistatic Protection Features a conductive graphene inner layer, PTFE fuel line kit can dissipate static electricity and reduce the risk of sparking, ensuring the reliable fuel transfer. Resistant to high temperature and corrosion, the kit is suitable for use in harsh environments.. Size and Installation 6AN PTFE fuel hose ID 0.3 inch8mm OD 0.47 inch11.8mm Length 10FT. Installation instructions are included. Please measure before purchase. Temperature and Pressure Range 6AN fuel line working temperature range -76 to 446 -60 to 230. Max working pressure 1500 PSI. Bursting pressure 4500 PSI. Minimum bend radius3.5 88.9mm.. Universal Compatibility Conductive PTFE hose fits with diesel, biodiesel, gasoline, E85, methanol, water, air, and transmission fluids. For hazardous environments, we recommend using conductive PTFE fuel lines for fuel supply systems, such as fuel injection systems, turbochargers, carburetors, LS engines, and fuel return systems.. Kindly Note The 6AN braided PTFE line kit can't be bent or folded in half. The EVIL ENERGY PTFE fittings and professional installation are recommended for optimal performance..

BETTER KITS 26FT AN6 Fuel line 12pcs PTFE Hose End Fitting 4pcs Quick Disconnect Fitting 6pcs Hose Separator Clamp 2pcs 6AN Male Coupler 1pcs Standard Wrench 1pcs Way Reaming Tool.. SPECIFICATIONS Inner Diameter 38. Outside Diameter 0.465. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 3000psi. Bursting pressure 10000psi.. EFFECTIVELY PTFE fuel line can be compatible with all automotive fuelslubricantscoolant. Mostly used in EFI LS system and used as fuel injection hose, ls engine swap, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, vapor return line, etc.. MATERIAL The 6an fuel line kits made of more corrosion-resistant nylon Stainless Steel Braided PTFE Synthetic Rubber The fitting made of T6061 Aluminum. The material of union adapter is lightweight aluminum.. SERVICE 6AN PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended. If you have any questions, please contact with us, we are in 24 hours service.

Antistatic Protection Features a conductive graphene inner layer, PTFE fuel line kit can dissipate static electricity and reduce the risk of sparking, ensuring the reliable fuel transfer. Resistant to high temperature and corrosion, the kit is suitable for use in harsh environments.. Size and Installation 6AN PTFE fuel hose ID 0.3 inch8mm OD 0.47 inch11.8mm Length 20 Feet. Installation instructions are included. Please measure before purchase. Temperature and Pressure Range 6AN fuel line working temperature range -76 to 446 -60 to 230. Max working pressure 1500 psi. Bursting pressure 4500 psi.Minimum bend radius88.9mm3.5inch.. Universal Compatibility The conductive PTFE hose fits with diesel, biodiesel, gasoline, E85, methanol, water, air, and transmission fluids. For hazardous environments, we recommend using conductive PTFE fuel lines for fuel supply systems, such as fuel injection systems, turbochargers, carburetors, LS engines, and fuel return systems.. Kindly Note 6AN braided fuel hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended.For optimal performance, we recommend using Evil Energy's PTFE fittings..

Size ID 0.31 inch. OD 0.45 inch. Length 20ft. Minimum bend radius 3.5 88.9 mm. Please measure before purchase Includes as shown in the picture. Parameter Thes hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size 6an hose ID 0.31. OD 0.45inch.Length 20 feet. Please measure before purchase Includes as shown in the picture.. Working Pressure Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1500psi. Bursting pressure 4500psi.. Suitable for Widely Usage PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Applicable Medium Our PTFE fuel hose kits is suit for all automotive fuels, lubricants, and coolants.. Notice PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Parameter This 6AN braided fuel line can withstand high pressure and has a long-lasting lifespan. Maximum working pressure 750 PSI. Bursting pressure 2,250 PSI. Temperature range -22 to 248.. Material The 6AN hose has a CPE rubber inner layer, a layer of 304 steel wire, and a nylon outer braid.. Compatibility The braided fuel hose is compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel, fuel, and more.. Suitable for Widely Usage The 6AN braided fuel line is used for many purposes, including transmission oil cooler lines, fuel return lines, fuel supply lines, coolant fluid hoses, fuel gauge lines, vacuum lines, turbo cooler lines, and oil feed lines.. Size and Installation Hose ID 0.31 inch Hose OD 0.56 inch Length 5 Feet. Installation instructions are included.It works with 6AN swivel hose end only..

Fits For The braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. Working Parameter Maximum Working Pressure 3000psi. Bursting Pressure 10000psi. Temperature Range -76 to 446 -60 to 230. Package includes 10Pcs 6AN swivel hose ends 4Pcs straight, 2Pcs 45Degree, 2Pcs 90Degree, 2Pcs 180Degree, 2Pcs 6AN hose separator clamp and 6AN braided fuel line Length 20Feet. Hose ID 516. OD 0.465inch. Application The Nylon braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. Warranty LokoCar provide 6-months warranty for the fuel line kits. Please feel free to contact us via Amazon message.

Application AN6 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line.. Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Inside Diameter 1132. Outside Diameter 0.54inch. Length 10 Feet. Please measure before purchase. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Size The thread size of the 6AN fitting is 916-18 UNF. The threaded end is sealed at a 37-degree angle. Feature The profile of the hose end is more compact and is suitable for tight spaces. Application The hose fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy. The bending part is produced through a forging process. Parameter Maximum working pressure 1,500 PSI. Working temperature range -40 to 250 -40 to 121.

Size 6AN male flare to 38 inch, the thread size of the 6 AN is 916 UNF. Fits to 38 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 38 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. NoteOnly applicable to stainless steel or aluminum hardline..

Size 6an hose ID 516 0.31 inch. OD 0.45 inch. Length 12 ft. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. 12 ft PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Applicable Medium Our 516 PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Notice The PTFE nylon braided fuel hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size PTFE fuel 6an hose ID 516 0.31 inch. OD 0.43 inch. Length 10ft. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Suitable for Wide Usage The PTFE fuel line is ideal for use in various high-temperature and high-pressure applications.. Applicable Medium The 6AN E85 fuel line is compatible with all automotive fuels, lubricants, and coolants.. Notice The -6 PTFE stainless steel braided fuel line is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Premium Aluminum FittingCrafted from lightweight T-6061 aluminum with polished anodized finish, boosting overall strength, durability and corrosion resistance. Smooth inner flow design ensures zero leakage under high pressure and high temperature, reusable and lightweight. Removable head supports push-on and twist-lock installation for versatile use.. Heavy Duty Braided Fuel HoseInner PTFE tube reinforced with 304 stainless steel braid and outer nylon woven layer, flexible with stylish racing look. Great heat, corrosion and abrasion resistance. Wide temperature range from -73C to 260C, rated 1000 PSI working pressure and 5000 PSI burst pressure. Standard inner 516 and outer 716 size for wide fitment.. Application The 6AN fuel line kit can be used as transmission cooler lines, turbo cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, oil feed line.. Package Included20 Feet AN6 Nylon-Stainless Steel Braided Fuel Hose 4 X Straight AN6 Reusable Swivel Fuel Hose Fitting Adapter 2 X 45 AN6 Reusable Swivel Fuel Hose Fitting Adapter 2 X 90 AN6 Reusable Swivel Fuel Hose Fitting Adapter 2 X 180 AN6 Reusable Swivel Fuel Hose Fitting Adapter You will get exactly the same as picture shows. 247 Customer SupportmaXpeedingrods provides lifetime technical support and a 1-year limited warranty for quality-related issues from the purchase date. Our customer service team is always ready to assist you..

Size 6an Hose ID 0.31inch. OD 0.45inch. Length 10 feet.Minimum Bend Radius 3.5 88.9mm. Please measure before purchase Includes as shown in the picture.. Working Pressure The hose Working temperature range -76 to 446 -60 to 230. Max working pressure 1500psi. Bursting pressure 4500psi.. Applicable Medium Our PTFE fuel hose kits is suit for all automotive fuels, lubricants, and coolants.. Suitable for Widely Usage PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Notice PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Maximum Working Pressure This 6an braided fuel line can stand high pressure, with long-lasting lifespan. Maximum working pressure 750psi bursting pressure 2250psi temperature Range -22 to 248.. Material 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Suitable for Widely Usage The 6an braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Size and Installation Hose ID 0.34 inch Hose OD 0.54 inch Length 20 Feet. Installation instructions are included. Work with 6AN swivel hose end only..

Material components 6AN Fuel Line is made of CPE synthetic rubberInner, Stainless Steel Wire MeshIntermediate and Nylon BraidedOuter.. Product Parameter Length 10 FT ID 0.348.8mm OD 0.5514mm.Temperature range -104 to 248 -40 to 120. Max working pressure 500PSI. Bursting pressure 2000PSI.. Widely Usage 6AN Fuel Line is widely used for transmission oil cooler line, vapor return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line, etc.. Attention The material of CPE is hard, it cannot be bent or folded excessively.Minimum bend radius 63.5mm.. Good Service If you have any problems, please feel free to contact us..

High-Performance Braided HoseConstructed with a CPE rubber inner core, reinforced by a 304 stainless steel wire layer, and finished with a nylon outer braid. Engineered for extreme durability with a working temperature range of -40F to 350F, maximum working pressure of 500 PSI, and burst pressure of 2000 PSI. Precision Push-Lock Hose EndsIncludes 10 black anodized aluminum fittings 4 straight, 2x 45, 2x 90, 2x 180. Designed specifically for push-on-lock installationno special tools required for a secure, leak-free seal. Note Not compatible with twist-lock fittings.. Versatile Fluid CompatibilityIdeal for a wide range of automotive applications including transmission cooler lines, oil feedreturn lines, coolant hoses, vacuum lines, and turbo lines. Compatible with transmission fluid, engine oil, hydraulic fluid, diesel, and race fuels. All-in-One 20FT KitComes with 20 feet of 6AN braided hose 0.34 ID, 0.55 OD. This complete kit provides ample length and the necessary fittings to handle most custom routing projects without needing to buy extra components. 247 Customer SupportmaXpeedingrods provides lifetime technical support and a 1-year limited warranty for quality-related issues from the purchase date. Our customer service team is always ready to assist you..

Dimensions PTFE Fuel 6AN Hose Inner Diameter 0.31 inches 8mm Outer Diameter 0.43 inches 11mm Length 10 feet. Please be sure to measure and confirm before purchasing. Specifications Operating Temperature Range -76F to 446F -60C to 230C Max Working Pressure 2000 PSI Burst Pressure 6000 PSI.. Applications The PTFE 6AN fuel line kit is compatible with transmission fluid, diesel, biodiesel, engine oil, E85 gasoline, methanol, water, and various fuels.. Hose Material The fuel line kit is constructed from highly abrasion- and corrosion-resistant nylon material. It features a stainless steel braided layer over a PTFE synthetic rubber core, while the fittings are manufactured from T6061 aluminum alloymaking it an ideal choice for high-temperature and high-pressure operating environments.. Package Contents 6AN PTFE Hose Fittings 2 Straight, 2 x 45-Degree, 2 x 90-Degree, 1 Pair of Gloves, 1 Wrench, 2 x 6AN Hose Separator Clamps, and 6AN E85 Nylon Braided Fuel Hose Length 10 feet..

Size The inner hole diameter is 0.51 inch 12.9 mm, which is suitable for clamping and mounting 6AN fuel lines.. Material The clamp is made of 6061-T6 aluminum alloy.. Function It is used to secure and separate transmission lines, helping to keep your project clean and organized.. Application The fuel hose separator clamp is widely used for fuel hoses, oil lines, brake lines, gas lines, water pipes, and more.. Note Five sizes of hose mounting clamps are available. Please measure the OD of your hose before purchasing..

Application 6AN braided fuel line kit widely used as fuel injection hose, LS engine exchange and EFI conversion fuel line.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with gasoline, diesel, and other fuels Except for E85 and ethanol. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Fuel Filter Regulator This fuel filter features an internal bypass that regulates fuel output pressure to 58psi. The LS Swap fuel pressure regulator has a built - in 10 micron fuel filter element to ensure that clean fuel is delivered to your engine, thus protecting the engine and increasing engine life.. Material 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp, 1pcs 6AN to 38 fitting, 1pcs 6AN to 516 fitting, 1pcs 6AN to 38 90 Degree Fitting, 1pcs fuel pressure regulator 58psi, 1pcs wrench and 6AN braided fuel line Length 25 Feet. Hose ID 0.31. Hose OD 0.56inch..

High Quality Raw Materials - With high quality PTFE resin as raw material, the products are extruded and sintered with high temperature. The woven layer adopts SUS304 stainless steel wire.ID 516. OD 0.465inch.Length 10 feet. Please measure before purchase. Strong Applicability - The Fuel Line Specially Designed To Compatible With Petrol, Diesel, Oil, Hydraulic Fluid, Pump Gas, Alcohol, E85, Coolant, Fuel, And EtcWidely Used In Fuel System, Transmission System And Cooler System.. Free Cutting Size - The fuel line is 10 Feet 3.1 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines.. Corrosion Pressure Resistance - The Braided Fuel Line Can Stand -76 To 446 -60 To 230, Maximum Working Pressure Psi 3000 Psi. Bursting Pressure Psi 10000psi. The Fuel Line Has Good Retardancy And Excellent Corrosion Resistance.Best For The Brake System, Fuel Pump, Fuel Filter, Oil Return, Fuel Return System, Turbo Cooler System, And Transmission System, Oil Cooler Kit, Ect.. Professional Service -PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended. Recommended to Use Adjustable AN Wrench.If You Have Any Questions, Please Contact us in Time To Provide Quality Service..

Red Blue Accent Fittings for Custom Style Ditch the boring black fittings Our bold red and blue anodized ends add a sharp, personalized look to your engine bay. Complements American muscle car aesthetics, making your Mustang or Camaro stand out at car meets.. Versatile Male Fittings for All Builds Equipped with 6 high-precision T6061 aluminum male fittings 2x 6AN male to male, 2x 6AN male to 14'' NPT, 2x 6AN male to AN8. Ideal for LS swaps, turbo setups, and muscle car fuel system upgradesno extra adapter purchases needed.. Durable Construction for Reliable Performance Features a PTFE inner tube, stainless steel braid. Withstands extreme temperatures and pressures, compatible with E85 fuel. Precision-machined AN fittings ensure tight, leak-free connections for street and track use.. DIY-Friendly Installation No professional skills requiredour kit includes a detailed instruction manual. Precision-threaded fittings ensure smooth assembly, letting enthusiasts tackle the install themselves and save on shop fees. Perfect for first-time modifiers and seasoned builders alike.. All-In-One Ready-to-Use Kit Everything needed for fuel line upgrades 10FT 6AN PTFE braided hose, 6 male fittings, 9045straight base fittings, and a step-by-step guide. All components are quality-tested for compatibilityunbox and start your build without delays..

Package Included1 20Ft Fuel Hose 4 AN-6 Straight Swivel Hose Ends 2 AN-6 45Swivel Hose Ends 2 AN-6 90Swivel Hose Ends 2 AN-6 180Swivel Hose Ends. MaterialFuel Line Double Stainless Steel Braided CPE Synthetic Rubber Fitting T7 Aluminum Alloy Nylon. Anodized Finish for strength and durability. Fuel HoseSize AN 6 Length 20ft. Working Temperature -40F to 350F. Working Pressure 1500 PSI. Safety FeaturesThe product has good flame retardancy and excellent corrosion resistance. Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life. Kindly Notice No instruction included. We recommend a professional installation, and the performance is still excellent after a long period of extreme environmental testing. Legal Disclaimer This part is not legal for sale in the states of CA and NY.

Premium Material Made of CPEinner layer, the 6AN fuel line is corrosion-resistant, offers stability across a wide temperature range -40125 and ensures a long service life. In addition, the stainless steel wiremiddle layer and the braided nylonouter layer creates a robust structure. The 6AN hose fitting is made of aluminium alloy, which is also corrosion-resistant and has great performance.. Parameter--Burst pressure2000psi Working pressure500psi. And please note the 6AN fuel line CAN NOT be bent excessively.. Easy to Use Compared to DIY installation, the assembled 6AN fuel line kit helps to enhance efficiency and save time. We offer various choices in length and swivel angle of the hose end fitting, meeting your needs in different scenarios.. Widely used The 6AN fuel line is suitable for automotive fuel system, engine cooling system...The 6AN fuel line is also compatible with petrol, diesel, coolant, hydraulic fluid, and other fluids, but it is not compatible with E85.. Tip Please choose appropriate hose end fittings and lengths, and had better use professional tools to ensure proper installation..

6AN FUEL LINE PARAMETERMAX working pressure 1885psi. Bursting pressure 7450psi. Temperature Range -40 to 275. ID 0.379.5mm OD 0.5213.3mm.. UPGRADED MATERIALMade in 3 structure, the inner is made of PTFE synthetic rubber, the intermediate is in 304 Stainless Steel Wire Mesh, and Nylon BraidedOuter.. UNIVERSAL FITTINGPTFE fuel line is compatible with transmission fluid, diesel, biodiesel, engine oil, E85 gasoline, methanol, water, diesel and fuel.. APPLICATIONIt is used to fuel injection hose, boost line, carb fuel line, engine swap fuel line, fuel return line, vapor return line,vacuum line and fuel supply line, etc.. NOTEThe material of PTFE is relatively hard, it cannot be bent or folded excessively.Minimum bend radius 3.5 inch. If you have any problems, please feel free to contact us..

Package Included 1 12Ft 6AN Braided Fuel Hose 6pcs Swivel Hose Ends. Apply Models The fuel line hose fits different brands of different cars. Just choose the right size. Application for Racing Fuel, Pump Gas, Fuels with Ethanol, Alcohol Based Fuels, Motor Oil Coolant etc. Parameter 12 Stainless Steel Braided 6AN Fuel Line Inner Hose, Material CPE Synthetic Material Tubing, Hose SizeID AN 6, Length 3.6m12ft, Color Silver, Hose End SizeID AN 6, Color Red Blue Inner Diameter AN-6 38 Outer Diameter AN-9 916. Safety Features With anodized surface, it is hard and solid Working Temperature -40 to 350 Working Pressure 1000 PSI Burst Pressure 6000 PSI. Note This part is not legal for sale in the states of CA and NY. Professional Installer is Highly Recommended No Instruction Included.

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp and 6an braided fuel line Length 20 Feet. Hose ID 0.31. Hose OD 0.56inch.. The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

High Performance and Durability Engineered with a CPE rubber inner core and reinforced with a layer of 304-grade stainless steel wire and a nylon outer braid, this 6AN braided fuel hose is designed to withstand demanding conditions.. Maximum Working PressureThe hose can operate efficiently under a maximum working pressure of 750 psi while offering a bursting pressure of 2250 psi.. Versatile Temperature Range Designed to function optimally in a broad temperature span of -22 to 248, this fuel line provides reliable performance in various environments, making it suitable for both high-temperature and sub-zero conditions.. Wide Compatibility Fully versatile and compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel, and traditional fuel, this hose is perfect for diverse automotive applications, ensuring seamless integration with your system.. Comprehensive Usage Perfect for transmission oil coolers, fuel returnsupply lines, coolant fluid hoses, and more, ease of setup with 6AN swivel hose ends..

Size 6an hose ID 0.31 inch. OD 0.45 inch. Length 10ft. Minimum bend radius 3.5 88.9 mm. Please measure before purchase Includes as shown in the picture. Parameter The hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications, etc. NOT FIT E85.. Universal ApplicationThe fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Inner hose CPE synthetic rubber, Outer layer stainless steel braided.Hose Length 3.6m12ft, Color Silver. Hose End Size AN-6, Inner Diameter 0.34 8.7mm, Outer Diameter 0.55 13.9mm.. Working Temperature -100 to 500 -73C to 260C ,Working pressure 1000 PSI, Burst pressure 3000 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. AdvantageDesigned for smooth flow, the hose end fittings are made of high-quality aluminum alloy material for strong strength, Polished and anodized surface provide the bright appearance and corrosion protection.. NOTENot Legal in the state of California New York, Not complies with C.A.R.B. regulations, Not for sale in the states of CA and NY..

The 6an braided fuel line kit can be compatible with 4L60E 4L65E Transmisson cooler.. The Hose ID 0.31. Hose OD 0.56.Length 15 Feet.Minimum bending radius63.5mm.. The hose Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 4pcs 6an swivel hose ends 2pcs straight, 2pcs 90degree,2pcs 6an hose separator clamp, 2pcs 6AN to 14NPT fittings, 2pcs 6AN 916-18 UNF Male Flare to 14-18 NPSM and 6an braided fuel line Length 15 Feet.. The hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose adapters are made of high-performance aluminum alloy..

Include a universal 12Ft fuel hose and 6 x swivel hose ends 2 x AN-10 to AN-6 Fuel Tank Fitting Adapters. The included swivel hose ends are rotary for convenient operation Fitting Type Straight, 45 Degree, 90 Degree. CNC machined items, based on premium stainless steel T6061 alloy aluminum materials. With anodized surface, it is hard and solid Working Temperature -40 to 350 Working Pressure 1500 PSI. Not Legal in the state of California New York, Not complies with C.A.R.B. regulations.

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 6pcs 6an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 6an hose separator clamp,2pcs 6an to 6an Fitting and 6an braided fuel line Length 10 Feet. Hose ID 0.31. Hose OD 0.56inch.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Withstand Extreme Conditions Our 6AN braided fuel hose can handle a working pressure of up to 500 PSI and a burst pressure of 2000 PSI, with a temperature range of -104F to 248F. The 38 braided fuel line is an ideal choice for high-performance engines, ensuring safe fuel transfer even in racing or extreme environments. Premium 3-Layer Construction The 6an fuel hose has a three-layer design with CPE synthetic rubber inner lining, 304 stainless steel wire mesh middle layer, and a nylon braided outer cover. This provides 6an fuel line with excellent corrosion resistance, wear resistance and aging resistance. Wide Compatibility The 6an braided nylon fuel line is compatible with a wide range of fluids, including gasoline, diesel, coolant, hydraulic oil, fuel, and water. It is also suitable for various applications such as cars, motorcycles, racing vehicles, fuel systems, oil coolers, and power steering lines. Versatile ApplicationsThe 6an fuel line hose is ideal for fuel delivery and return systems, and it can also serve as a fuel gauge line, fuel return line, fuel supply line, coolant fluid hose, vacuum line, turbo cooler line, transmission oil cooler line, fuel injection hose, power steering return hose, fuel line hose,oil feed line,ls engine swap fuel line,vapor return line, etc. Cut to Fit Hassle-Free Compared to traditional rubber hoses, the 6an 38 braided fuel line offers superior durability and resistance to aging, providing a longer service life. With a length of 20FT for the 6an fuel hoses, it can be freely cut to fit different needs. The flexible nylon braiding allows tight bends min. 63.5mm radius.

Size 6AN fuel hose ID0.318mm,OD0.5614.3mm.Length10ft.. Parameter Working pressure750psi,burst pressure2250psi Temperature range-22F to 248F30C to 120C Min bending radius63.5mm.. Application 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.. Material 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

APPLICATION- For racing fuel, pump gas, diesel, motor oil coolant etc. Nylon braided fuel hoses can be used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line.. WORKING ENVIRONMENT-Maximum Working Pressure725psi5mpa. Bursting Pressure2465psi17mpa. Working Temperature Range-40 to 338-40 to 170.. SIZE- length20 feet6M. Inner diameter0.34 inches 8.6 mm. Outer diameter0.55 inches 14.00 mm.. MATERIAL- Inner layerCPE synthetic rubbermiddle layer304 stainless steel wire mesh sleeveouter layerbraided nylon. Resistant to high temperature pressure abrasion and aging. Excellent flexibility and flame retardancy.. NOTE- Double check the hose size before bidding. Our rubber hose is compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT.NOT FIT FOR E85..

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp,2pcs 6an to 6an Fitting and 6an braided fuel line Length 20 Feet. Hose ID 0.31. Hose OD 0.56.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Unique Features The 6AN 20FT Fuel Line Hose is covered with NylonStainless SteelCPE Rubber to enhance durability, excellent corrosion resistance and give a cool racing appearance The AN Fittings is made of 6061-T6 Aluminum, anodized finish for good durability.. Working Parameter Hose ID 0.338.47 mm, OD0.5714.51 mm Length 20 Feet Working Temperature Range -40 to 257 -40 to 125 Max Working Pressure 500PSI Bursting Pressure 2000PSI. Package Includes The 6AN Fuel Line Kit includes 10 PCS 6AN Hose End Fittings , 20 FT AN6 Stainless Steel Braided CPE Fuel Line , 4 PCS 6AN Hose Separator Clamp , 10 PCS Red Socket Nut , 2 PCS Male Flare Plug with Hex head.. Application 6AN Nylon Braided Hose Kit is compatible with coolant, diesel, engine oil, hydraulic fluid, etc Not suitable for E85 Can be used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Support Professional installation is highly preferred. Recommend to install with our AN Wrench. If you have any questions and needs, please find our 24-hour Customer Service Team via Amazon..

Full Customization in One Kit This 30-piece kit includes 30Ft AN6 stainless steel braided PTFE fuel line,10x 6AN PTFE fittings 04590, 10x Red Socket Nut, 4x Quick Disconnect Fittings, 3x Hose Separate Clamps. One kit meets your different installing scenario.. Exclusive Tool for Ease of Installation Includes 3-16AN fitting wrench and hose reaming tool for easier installation of PTFE fittings. BRIFITOR exclusive wrench protectors also included to prevent scratches on AN fittings during DIY installationno specialized tools required.. Precision Engineering The 6AN e85 fuel line is covered with NylonStainless Steel and PTFE to enhance strength and resist all types of chemicals All the 6AN Fittings have 37 flare leak-proof angles with dual O-rings maintain fuel line integrity even under aggressive driving or off-road conditions.. Working Parameter 6AN PTFE fuel line Hose ID 0.318 mm, OD 0.4411.4 mm Length 30 Feet Working Temperature Range -76 to 446 -60 to 230 Working Pressure 1500 PSI Bursting Pressure 4500 PSI. Universal Application PTFE nylon braided fuel line kit can be used in EFI LS system, Fuel system, transmission system, brake system and cooler system Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85,coolant,fuel,etc..

Size 38 Fuel line Hose ID 0.41inch Hose OD 0.65inch Length 20 Feet. Fittings6AN to 38 inch barb, and thread size of 6an is 916-18UNF. Note This kit uses a scientific stepped design. The push lock fitting and fuel line can be tightly connected with the clamp to achieve a sealed connection.. Pressures Temp Range Maximum Working Pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 88.9mm.. Application The 38 6AN braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.. Material 6an fuel line is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid..

Size ID of 6an fuel hose0.348.63mm,OD0.5413.71mm.Length10ft.. Parameter Working pressure500psi,burst pressure2000psiTemperature range-40F to 257F-40C to 125CMin bending radius63.5mm.. Application 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.. Material Made of CPE synthetic rubber and nylon braided.. Warranty EVIL ENERGY provide 6an fuel line hose fitting kit 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message..

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, and 6an braided fuel line Length 16 Feet. Hose ID 0.31. Hose OD 0.56inch.. 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

All You Need In One Kit The 6an Fuel Line Kit includes 20FT Stainless Braided PTFE Fuel Line and all necessary fittingadapters for a hassle-free installation, greatly saving your time and budget. Long Lasting Durability The 6AN PTFE fuel line is designed for long-lasting performance resistance to wear and tear. The 6an fittings red and blue are made by high quality aluminum, ensuring reliability in high temperature and pressure environment. Special Tool For Ease Of Install Equipped with AN Fitting Wrench and Soft Vise Jaws to prevent scratches while installing the hose fitting onto the 6an ptfe hose. The 6AN Hose Reaming Tool helps you to tidy up the incisions of hose for easy installation. Versatile Application 6AN PTFE braided fuel line is adept at handing automotive fuel, such as gasoline,ethanol,E85,oil and coolant. Commonly used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc. Experience Excellent Performance Whether you're a enthusiast or professional, upgrading an existing setup or building a custom system, this 6an ptfe fuel line kit offers versatility and adaptability to meet your specific requirements..

All You Need In One Kit The 6an Fuel Line Hose Kit includes 20FT Nylon Braided CPE Fuel Line and all the necessary fittingadapters for a hassle-free installation, greatly saving your time and budget. Long Lasting Durability The 6an cpe fuel line is designed for long-lasting performance resistance to wear and tear. The 6an hose end fittings are made by high quality aluminum, ensuring reliability in high temperature and pressure environment. Special Tool For Ease Of Install Equipped with AN Fitting Wrench and Soft Vise Jaws to prevent scratches while installing the hose fitting onto the 6an hose. The 6AN Hose Reaming Tool helps you to tidy up the incisions of hose for easy installation. Versatile Application 6AN braided fuel line is adept at handing automotive fuel, such as coolant, diesel, engine oil, hydraulic oil. Commonly used as fuel injection hose,fuel pump, fuel filter, transmission cooler system, etc. Note Not suitable for E85. Experience Excellent Performance Whethter you're a enthusiast or professional, upgrading an existing setup or building a custom engine system, this 6an 20ft fuel line kit offers versatility and adaptability to meet your specific requirements..

All You Need In One Kit The 6an Fuel Line Kit includes 30FT Nylon Braided PTFE Fuel Line and all the necessary fittingadapters for a hassle-free installation, greatly saving your time and budget. Long Lasting Durability The ptfe fuel line is designed for long-lasting performance resistance to wear and tear. The 6an PTFE hose end fittings are made by high quality aluminum, ensuring reliability in high temperature and pressure environment. Special Tool For Ease Of Install Equipped with AN Fitting Wrench and Soft Vise Jaws to prevent scratches while installing the hose fitting onto the ptfe line. The 6AN Hose Reaming Tool helps you to tidy up the incisions of hose and separate the braided layer from ptfe layer. Versatile Application 6AN PTFE braided hose is adept at handing automotive fuel, such as gasoline,ethanol,E85,oil and coolant. Commonly used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc. Experience excellent performance Whethter you're a enthusiast or professional, upgrading an existing setup or building a custom system, this 6an ptfe fuel line kit offers versatility and adaptability to meet your specific requirements.

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree,2pcs 6an hose separator clamp, 2pcs 6AN Male to 58 x 18 inverted flare thread fittings and 6an braided fuel line Length 20 Feet. Hose ID 0.31. Hose OD 0.56inch.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

High Temperature Resistant Material CPE,Nylon Braid Length 3.28ft Hose Inner Diameter9mm Hose Outer Diameter 14mm Hose Hole Size AN6 Pressure Rating Working pressure 3000psi Burst pressure 10000psi Temperature Range -40176C. Compatible with Various Fuels Vehicles Mostly worked with coolant, fuel, diesel, oil, hydraulic fluid, pump gas, alcohol and air, pump, oil return, fuel return system, turbo cooler system and transmission system.. Long-Lasting Fuel Line The fuel hose is made of CPE,Nylon Braid, which is durable and reliable,not easy to break or fade.the fuel line has good flame retardancy and great corrosion resistance.. Packing list 1 Pcs Fuel Line Hose. Notice Please allow 1-10mm differences due to manual measurement, thanks..

Size Hose ID 0.31inch Hose OD 0.56inch Length 20 Feet. Please measure before purchase. Pressures Temp Range Maximum Working Pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 63.5mm.. Application The braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Material 6AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc..

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 6pcs 6an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 6an hose separator clamp, 2pcs 6AN to 14 NPT Fitting, 6an braided fuel line Length 10 Feet. Hose ID 0.31. Hose OD 0.56inch.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp and , 2pcs 6AN to 14 NPT Fitting, 6an braided fuel line Length 20 Feet. Hose ID 0.31. Hose OD 0.56inch.. 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Hose ID 0.31inch Hose OD 0.56inch Length 20 Feet. Please measure before purchase Includes as shown in the picture.. Working pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 63.5mm.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.. 6AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

MATERIALThe hose is CPE synthetic rubber with dual layer braided, one layer is 304 stainless steel wire mesh sleeve and outer layer is braided nylon. NOT FIT FOR E85.. FEATURESMaximum Working Pressure psi 500 psi.Bursting Pressure psi 2000psi. Working Temperature -40 to 350,Maximized Resistance to Heat,Corrosion and Abrasion.. APPLICATIONNylon braided fuel hoses can be used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line,radiator line, ls swap fuel line, gasoline hose and vacuum.. SIZE6AN,Length10 feet. Inner diameter 0.34 inch8.8MM. Outer diameter0.55inch14MM. Pls be noticedwork with 6AN swivel hose end only.

Braided stainless steel fuel hose features a stainless steel braided outer cover and a Chlorinated Polyethylene CPE synthetic rubber inner line.. This AN6 stainless steel braided hose can usually be used with coolant, diesel, engine oil, hydraulic oil, pump air, air and fuel.. AN6 stainless steel braided hose can be used in vehicle and motorcycle transmission cooler system, pump, system and fuel system, such as fuel pump, fuel filter, fuel tank, oil filter, oil sandwich adapter, oil return, and etc.. The outer braided layer is made of stainless steel, which is waterproof, rust resistant, abrasion resistant, and very durable.. Package Included 1 x 3.3ft 38 Braided Fuel Line.

Size Hose ID 0.31inch Hose OD 0.56inch Length 10 Feet. Please measure before purchase. Pressures Temp Range Maximum Working Pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 63.5mm.. Application The braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Material 6AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc..

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 4pcs 6an swivel hose ends 2pcs straight, 2pcs 90degree and 6an braided fuel line Length 20 Feet. Hose ID 0.53. Hose OD 0.79inch.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. This wrench size can be adjusted to 3AN, 4AN, 6AN, 8AN, 10AN, 12AN, 14AN and 16AN. It's made of lightweight 6061-T6 aluminum. Featuring a curved design with a non-slip handle for a comfortable grip and fit for hand movement.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree,2pcs 6an hose separator clamp,1pcs wrench and 6an braided fuel line Length 20 Feet. Hose ID 0.31. Hose OD 0.56.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line. Braided Steel Fuel Line Maximum Working Pressure psi 1000 psi. Bursting Pressurepsi 6000 psi. Working Temperature Range -40 to 257 -40 to 125 . Please make sure the pressure and temperature range is suitable for your application before purchase. Include a universal 3 FT fuel hose and 2 pcs swivel hose ends Inner Diameter 38 10.5 mm - Outer Diameter 58 17.5 mm. Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur. Professional installation is highly recommended. Please be careful of burrs at the inlet and outlet.

Size 6AN fuel hose ID 0.31 OD 0.56. 8AN fuel hose ID 0.41 OD 0.65.. Parameter Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Application Braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Medium Nylon and stainless steel braided fuel hose kit compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Kit Includes 6AN Fuel Hose Kit 1PC and 8AN Fuel Hose Kit 1PC as shown..

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 6pcs 6an hose separator clamp,2pcs 6an to 6an Fitting and 6an braided fuel line Length 20 Feet. Hose ID 0.34. Hose OD 0.54inch.. 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 2pcs hose finisher clamp and 6an braided fuel line Length 3 Feet. Hose ID 0.31. Hose OD 0.56.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Size The 6AN hose ID 0.31 inch hose OD 0.56 inch. Length 20 feet.. Parameter Maximum working pressure of this 6AN steel braided hose 750 PSI burst pressure 2,250 PSI. Temperature range -22F to 248F. Minimum bend radius 2.5 inches.. Material The 6AN stainless steel fuel line is made of a CPE rubber inner layer, and a braided 304 stainless steel outer layer. The hose fittings are made of tough aluminum alloy, and the gloves featuring a nitrile coating that offer maximum protection.. Package Includes The package includes 10PCS of 6AN swivel hose ends 4PCS straight, 2PCS 45-degree, 2PCS 90-degree and 2PCS 180-degree, 2PCS hose separator clamps, one 6AN stainless steel braided hose, one installation tool and a pair of gloves.. Compatibility The 6AN fuel line kit is compatible with transmission fluid, race gas, vacuum, hydraulic fluid, diesel, and fuel..

PREMIUM MATERIALThe 6AN transmission cooler hose is made with high-quality woven Nylon and Stainless Steel Braided CPE Synthetic Rubber, thus preventing it from rusting and corrosion. It has a wall thickness of 35mm.. BETTER TRANSIMMISIONA perfect fuel line for vehicles with engines that need a large tube diameter. Its 38 inch diameter helps in better flow and intake of fuel. This 6AN braided hose ensures that the car engine is able to process the fuel in the best possible state. The 6AN fuel line comes as a roll of 10 feet long enough for a wide range of applications.. QUALITY TESTED The tube is double annealed and 304 grade making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs.Oil resistant, cold-resistant, and ethanol tolerance.. BENDABLE The 6AN transmission hose enable you to make sharp bends without kinking. It is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves.. WIDE APPLICATION The 6an fuel line is specially designed to be compatible with any fuel including methanol and nitromethane, oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85..

Length6ftHose Inner Diameter0.34Hose Outer Diameter0.55Pressure Rating Working pressure1500psiBurst pressure6000psiTemperature Range-32F266F. FunctionMostly worked with coolant, fuel, diesel, oil, hydraulic fluid, pump gas, alcohol and air, pump, oil return, fuel return system, turbo cooler system and transmission system.. MaterialThe fuel hose is made of CPE Rubber,Nylon braided,which is durable and reliable,not easy to break or fade.. Installation InstructionsOur engine fuel line is easy for you to use.. Please NoticePlease allow 1-10mm differences due to manual measurement, thanks..

Material Components The 6AN fuel line is composed of three layers CPE synthetic rubber Inner, stainless steel wire mesh Intermediate, and braided nylon Outer. The AN hose fittings are made of aluminum alloy, which is corrosion-resistant, lighter than other metals, and easy to install.. Product Parameter Length 4 FT ID 0.348.8mm OD 0.5514mm.Temperature range -104 to 248 -40 to 120. Max working pressure 500PSI. Bursting pressure 2000PSI.. Widely Usage 6AN Fuel Line is widely used for transmission oil cooler line, vapor return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line, etc.. Attention The material of CPE is hard, it cannot be bent or folded excessively. In addition, the 6AN fuel line is not compatible with E85.. Package Content 6AN fuel line 4FT 1pcs 0 hose fitting1pcs 90 hose fitting.

Wide Applications6AN High-Quality nylon fiber and stainless steel wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection. for racing fuel, pump gas, ethanol fuel, alcohol-based fuel, engine oil and coolant, etc,but not applicable to E85. MaterialInter hose CPE synthetic rubberOuter layer stainless steel wire braided. Premium nylon fiber and stainless steel wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection. Size and Installation Length10 Feet. Size ID AN6, Hose ID 0.34 inch Hose OD 0.54 inch. Installation instructions are included. Work with 6AN swivel hose end only. Working Temperature -40 to 350 Working Pressure 1000PSI Burst Pressure 5000 PSI. The fuel line has good flame retardancy and excellent corrosion resistance. NOTEProfessional installation is highly recommended.Please do not install it in a corrosive environment,which will affect the service life of 6AN braided fuel Line Hose. Not Legal in the state of California New York, Not complies with C.A.R.B. regulations.

6AN Nylon Fiber Braided outer cover and a Chlorinated Polyethylene CPE synthetic rubber inner line. Universal Such as fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars motor racing bikes,but not applicable to E85.. Made of CPE synthetic rubber and stainless steel braided for excellent flexibility and resistance to abrasion. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced. Outer nylon braided has excellent inflaming and safer to use.. Work Scope Maximum Working Pressure psi 1000 psi, Bursting Pressure psi 6000psi. Working Temperature -40 to 350.. Include a universal 12Ft fuel hose 2x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends.. Not Legal in the state of California New York, Not complies with C.A.R.B. regulations.

Nylon stainless steel braided fuel line can be worked with transmission fluid, coolant, oil, race gas, pump gas, vacuum, hydraulic fluid, diesel and fuel, NOT FIT E85.. Universal ApplicationThe fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Inner hose CPE synthetic rubber Middle layer 304 stainless steel wire mesh sleeve Outer layer High quality braided nylon Length 6.1m 20Ft, Color Black Blue, Inner Diameter 8.7 mm 0.342, Outside Diameter 13.89 mm 0.546.. Working Temperature -100 to 500 -73C to 260C ,Working pressure 1000 PSI, Burst pressure 3000 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. Package Include20FT 6AN Nylon Stainless Steel Braided Fuel Line Hose x 1Pc. No instruction or direction included in the package, Professional installation is highly recommended.. NOTENot Legal in the state of California New York, Not complies with C.A.R.B. regulations, Not for sale in the states of CA and NY..

MaterialOutside Hose Material Coverd with High Quality Nylon and Stainless Steel Wires Inner Hose Material CPE Synthetic Material Hose.. CPE Braided HoseMostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel.. ApplicationThis braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect.. PerformanceNylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use.. NoteNot recommended installation in corrosive environment, braided fuel line's service life will be influenced..

Unique Features The 6AN e85 fuel line is covered with NylonStainless Steel Braided and PTFE to enhance strength and resist all types of chemicals The PTFE AN Fittings is made of 6061-T6 lightweight Aluminum, anodized finish for great durability Included an adjustable AN fittings wrench and a PTFE hose assembly tool for your easier hose assembly. Working Parameter AN6 PTFE Braided Fuel Hose ID 0.31 8 mm, OD 0.44 11.3 mm Length 25 Feet Working Temperature Range -76 to 446 -60 to 230 Max Working Pressure 3000 PSI Bursting Pressure 10000PSI. Universal Application PTFE nylon braided fuel line kit can be used in EFI LS system, Fuel system, transmission system, brake system and cooler system Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, etc. Package Including The 6AN Fuel Line Fittings Kit includes 14 PCS 6AN PTFE hose fittings , 25 Ft AN6 stainless steel braided PTFE fuel line , 1 PCS adjustable AN hose fittings wrench , 1 PCS PTFE hose assembly tool , 2 PCS 6AN hose separator clamp , 8 PCS socket nut , 2 PCS male flare plug with hex head. Support Professional installation is highly preferred Recommend to install with our AN Fittings Wrench If you have any questions and needs, please find our 24-hour Customer Service Team via Amazon.

Hose ID 0.31. Hose OD 0.56inch. Length 10feet.. 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy.. Maximum Working Pressure 750psi. Bursting Pressure2250psi. Temperature Range -22F to 248F.. Package includes 6pcs 6an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree , 2pcs hose clamps and 6an stainless steel braided fuel line.. The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

Size PTFE fuel 6an hose ID 516 0.31 inch. OD 0.43 inch. Length 10ft. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium PTFE 6an fuel line kit is compatible with all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Notice PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

ID 0.31inch. OD 0.45inch. Length 20 feet.Minimum Bend Radius 3.5 88.9mm. Please measure before purchase Includes as shown in the picture.. The hose Working temperature range -76 to 446 -60 to 230. Max working pressure 1500psi. Bursting pressure 4500psi.. Applicable Medium all automotive fuels, lubricants, and coolants.. PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Size 6an fuel hose ID 0.31inch. OD 0.45inch. Length 10 feet.Minimum Bend Radius 3.5 88.9mm. Please measure before purchase Includes as shown in the picture.. Working Pressure The hose Working temperature range -76 to 446 -60 to 230. Max working pressure 1500psi. Bursting pressure 4500psi.. Suitable for Widely Usage PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Applicable Medium Our PTFE fuel hose kits is suit for all automotive fuels, lubricants, and coolants.. Notice PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Size PTFE 6an fuel line ID 516 0.31 inch. OD 0.45 inch. Length 26 ft7.9 m. Please measure before purchase Includes as shown in the picture. Parameter PTFE fuel line hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE LS fuel hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size and Installation 6AN PTFE fuel hose ID 0.38mm OD 0.4711.8mm Length 10FT. The instruction manual is included. Please measure before purchase. Temperature and Pressure Range 6AN fuel line working temperature range -76 to 446 -60 to 230. Max working pressure 1500 PSI. Bursting pressure 4500 PSI. Minimum bend radius3.5 88.9mm.. Universal Compatibility EVIL ENERGY PTFE hose fits with diesel, biodiesel, gasoline, E85, methanol, water, air, and transmission fluids. For hazardous environments, we recommend using conductive PTFE fuel lines for fuel supply systems, such as fuel injection systems, turbochargers, carburetors, LS engines, and fuel return systems.. Antistatic Protection Features a conductive graphene inner layer, EVIL ENERGY PTFE fuel line hose can dissipate static electricity and reduce the risk of sparking, ensuring the reliable fuel transfer. Resistant to high temperature and corrosion, the hose is suitable for use in harsh environments.. Kindly Note The 6AN PTFE line can't be bent or folded in half. The EVIL ENERGY PTFE fittings and professional installation are recommended for optimal performance..

FitmentFor Holley 4150. SaleUseWe provide product sales, and buyers can search for usage videos for product usage. PackagedMain body and required accessories. SupportIf you have any questions and needs, please contact us.. InstallationEasy to install.

Material 6AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility The AN6 braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Application The 6AN braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Size Hose ID 0.34 inch Hose OD 0.54 inch Length 10 Feet. Work with 6AN swivel hose end only.. Working Pressure This 6AN braided fuel line can stand high pressure, with long-lasting lifespan. Maximum working pressure 750psi bursting pressure 2250psi temperature Range -22 to 248..

Fits For The braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. Working Parameter Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257. Package includes 6Pcs 6AN swivel hose ends 2Pcs straight, 2Pcs 45degree, 2Pcs 90degree, 2Pcs 6AN hose separator clamp and 6AN braided fuel line Length 10Feet. Hose ID 0.34inch. Hose OD 0.54inch. Application The Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. Warranty LokoCar provide 6-months warranty for the fuel line kits. Please feel free to contact us via Amazon message.

Size 6AN fuel line Hose ID 0.31in8mm Hose OD 0.56in14.3mm Hose Length 10FT. Parameter Max working pressure 750psi Bursting pressure 2250psi Temperature range -22 to 248. Material Braided line is made of CPE rubber inner, 304 stainless steel wire layer and nylon braid outer Aluminum alloy hose fittings. Medium The CPE braided fuel hose fit for fuel, diesel, oil, race gas, vacuum, transmission fluid and hydraulic fluid. Usage Widely used in most hose line systems, such as transmission oil cooler line, fuel supple or return line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line, etc. Package 10FT 6AN braided fuel line, 6AN swivel hose ends 2PCS straight, 2PCS 45 degree, 2PCS 90 degree.

Material - Inner hose CPE synthetic rubber Outer layer stainless steel wire braided. Applications Automobile or ship engine fuel, racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil coolant etc, NOT FIT E85.. Color Silver, Length10 Ft, Inner Diameter 0.34 8.71mm, Outside Diameter 0.55 13.89mm. Working Temperature -40F to 260F, Working pressure 1000 PSI Burst pressure 3000 PSI. Premium nylon fiber and stainless steel wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.. NOTE Not Legal in the state of California New York, Not complies with C.A.R.B. regulations, Not for sale in the states of CA and NY. No instruction or direction included in the package, Professional installation is highly recommended..

Inner Hose CPE synthetic rubber. Middle Layer 304 stainless steel wire mesh sleeve. Outer Layer Quality braided nylon.. Applications Racing fuel, pump gas, fuels with ethanol, alcohol-based fuels, diesel, motor oil coolant, etc.. Working Temperature -40 to 350 Working Pressure 500PSI.. High-quality nylon fiber and stainless steel wire materials, long service life, wear-resistance and high-temperature resistance. Perfect racing accessories.. NOTE Not Legal in the state of California New York, Not complies with C.A.R.B. regulations, Not for sale in the states of CA and NY. No instruction or direction included in the package, Professional installation is highly recommended..

IncludesThe 6AN nylon and stainless steel braided CPE fuel line kit includes 10pcs 6an CPE hose ends 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends and 38 CPE braided fuel line Length20ft6M. MaterialsThe 6AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85.. LifetimeThe 6AN CPE hose working temperature range -40 to 257 -40 to 125. It is compatible with nearly every substance or agent used. Maximum Working Pressure psi 500 psi. Bursting Pressure psi 2000psi.. CPE HoseThe 6an CPE hose fitting is reused, just replaced a new oliveferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube.. WarrantyThree months limited warranty Free lifetime technical support..

Fuel Line Hose Kit6AN Braided Fuel Line Kit Is Widely Used For Transmission Oil Cooler Lines, Fuel Return Lines, Fuel Supply Lines, Coolant Hoses, Fuel Gauge Lines, Vacuum Lines, Turbo Cooler Lines, And Oil Feed Lines. Applications racing fuel, pump gas, ethanol fuel, alcohol-based fuel, engine oil and coolant, etc, but not applicable to E85.. The 6AN CPE Stainless Steel Braided Fuel Line Kit Includes16Ft Stainless Braided Fuel Line Kit 1 x CPE Fuel Line, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends.. MaterialInner Hose CPE Synthetic RubberThe Middle Layer 304 Stainless Steel Wire Mesh Sleeve The Outer Layer High Quality Braided Nylon, SizeIdAn6,Length5 m16ft,ColorBlack,Outside Diameter0.55inch13.97mm,Inner Diameter 0.34inch 8.71mm. Please Measure Before Purchase. Work scopeWorking Temperature -40 to 350 Working Pressure 500PSI Burst Pressure 2000 PSI. TipsProfessional installation is highly recommended.Please do not install it in a corrosive environment,which will affect the service life of 6an braided fuel Line Hose.Not Legal in the state of California New York, Not complies with C.A.R.B. regulations.