Replaces Part Number 17025, 0258017025, 304110, 300300, 300310.PLEASE COMPARE THE ORIGINAL PART WITH PICTURES TO ENSURE YOU ARE ORDERING THE CORRECT PART. Compatible ModelsAEM 30-4110 Digital Wideband UEGO Gauge AEM 30-0300 X-Series Digital Wideband UEGO AFR Gauge AEM 30-0310 X-Series Inline Wideband UEGO AFR Controller Most 4.9 LSU Wideband Controller Gauge. This oxygen sensor will accurately detect the mixture of air and fuel, helps ensure your engine is constantly monitored and operating efficiently, while maximizing performance. Corrosion-proof connector and pre-installed thread lubricant ensure a plug-and-play installation in under 30 minutes.. Rugged design withstands extreme temperatures and vibrations, backed by a 12-month warranty for worry-free reliability..

Oxygen sensor Composed of zirconia internal ceramic material, with porous platinum coating and metal shell protection. It improve heat resistance, wear resistance, high temperature resistance and extend the service life of o2 sensors. Reference Number Before purchasing this oxygen sensor, please check the yearmode and the interchangeable part number to confirm compatibility.Reference number17025, 0258017025, 304110, 300300, 300310. Compatible Vehicles Compatible with part numbers 30-4110 Digital Wideband UEGO Gauge, 30 0300 X Series Digital Wideband UEGO AFR Gauge, 30 0310 X Series Inline Wideband UEGO AFR Controller ,Most 4.9 LSU Wideband Controller Gauge. Car O2 Sensor FunctionO2 sensor monitors the mixed gas, ensuring that the engine is in an optimal combustion state of the mixed gas The o2 sensor can control the automobile exhaust emission and improve the automobile engine fuel combustion quality. Replacement of Oxygen SensorThe service life of the normal ignition coil is usually about 100000 km - 120000 km. If the oxygen sensor is damaged, whether it reaches 100000 km or not, it needs to be replaced in time.

Applicable Models Oxygen sensor for Most 4.9 LSU, for AEM 30-4110 30-0300 30-0310X-Series Digital Inline. Replacement Part Number Replace 0258017025, 02580-17025, 02580 17025, please carefully check your vehicle's year, brand and model, image, and part number enter your specific vehicle model in the box above to ensure compatibility before purchasing the oxygen sensor. Manufacturing of O2 Sensor LuxOxyPro oxygen sensors are made of carefully selected materials that can reach temperatures up to 650 degrees Celsius, with faster response times and longer lifespan. The Role of O2 Sensor Oxygen sensor are key components that maintain the performance of vehicle engines. It can accurately detect and continuously monitor the operation of the engine. O2 sensors can solve problems such as unstable idling, frequent stalling, poor acceleration, and high fuel consumption for your vehicle. Important Reminder Please carefully check whether our oxygen sensor is the same as your old one before purchasing to ensure correct purchase. If you encounter any problems while using our o2 sensor, please send us an email and we will reply within 24 hours.

Vehicle FitmentAEM Wideband Controllers fit for 30-4110 Digital Wideband UEGO Gauge, 30-0300 X-Series Digital Wideband UEGO AFR Gauge, 30-0310 X-Series Inline Wideband UEGO AFR Controller, Most 4.9 LSU Wideband Controller Gauge.. Replace OE NumberThe O2 Sensor Replacement for OE Number17025, 0258017025, 304110, 300300, 300310,Please take care with the position tips to ensure that it is plug and the length of the sensor.. Accurate and DurabilityThe Oxygen Sensor guarantees superior performance with high-quality materials, including platinum, ceramics 310S stainless steel. Carefully selected components ensure accurate detection and durability, making it the top choice for precise readings. Choose our sensor for dependable oxygen level data.. Fast Acting HeaterFor Planar and Wire Thimble type sensors, a fast-acting heater optimizes sensor function by enabling the oxygen sensor, Heat-resistant materials withstand high temperatures for long-lasting performance.. PackagePackage Includes wideband o2 sensor,1 Pack, The O2 Sensor has extremely high heat resistance, corrosion resistance, abrasion resistance, High-quality perfect fit, and is easy to install..

17025 LSU Oxygen Sensor Part fits for AEM Wideband Controllers with part numbers 30-4110 Digital Wideband UEGO Gauge, for 30-0300 X-Series Digital Wideband UEGO AFR Gauge.. 4.9 LSU O2 Oxygen Sensor works for 30-0310 X-Series Inline Wideband UEGO AFR Controller, for 4.9 LSU Wideband Controller Gauge Most. Its the perfect aftermarket part.. Replace Part Number 17025, 0258017025, 304110, 302004, 300300, 300310. Please pay attention to the plug and the length of the A F gauge sensor before ordering.. Upgraded Design Aem wideband sensor is crafted from high temperature resistant material for quicker response and helps improve engine performance and fuel efficiency by reducing harmful emissions, then extends the life of catalytic converter.. Package Includes 1 x 0258017025 Wideband O2 Oxygen Sensor..

This AEM 3 gauge kit is a popular combo Compatible with commonly used gauges and Compatible with. Our official MAPerformance lanyard included as a special bonus. AEMs 30-0306 X-Series -30inHg35PSI -12.5BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features. AEMs 30-0301 X-Series 100 PSI7 BAR Digital OilFuel Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features. The X-Series Wideband UEGO AFR Sensor Controller Gauge PN 30-0300 measures 2 116th-inch 52mm in diameter, and features a modern, visually striking faceplate and new seven-segment center display.. Slim 0.825 overall gauge depth and 0.200 cup depth mount them virtually anywhere Black faceplates and bezels included..

Fitment CompatibilityCompatible with AEM 30-4110 Digital Wideband UEGO Gauge, AEM 30-0300 X-Series Digital Wideband UEGO AFR Gauge, AEM 30-0310 X-Series Inline Wideband UEGO AFR Controller, and most 4.9 LSU wideband controller gauges.. OE Replacement NumbersReplacement for 17025, 0258017025, 304110, 300300, 300310. Please check the plug connector, wiring harness length, and OE number before purchase to ensure proper fitment.. Accurate Wideband ReadingDesigned to monitor oxygen content and support accurate air-fuel ratio readings, helping the engine control system optimize combustion, fuel efficiency, and overall driving performance.. Durable ConstructionBuilt with premium platinum and ceramic sensing elements, 310S stainless steel shell, pre-applied anti-seize threads, and double laser-welded construction for heat resistance, corrosion resistance, and long service life.. Easy InstallationDirect-fit plug connector and 39.3 inch wiring harness help simplify installation. Package includes 1 wideband O2 oxygen sensor, ready for replacement or repair use..

Replacement Part Numbers 17025, 0258017025, 304110, 300300, 300310. Check part numbers to ensure an exact match.. Compatibility Compatible for Most 4.9 LSU Wideband Controller Gauge, for AEM 30-0300 Wideband UEGO AFR Gauge, for AEM 30-0310 Wideband UEGO AFR Controller, for AEM 30-4110 Digital Wideband UEGO Gauge. Function Monitors the oxygen level to help manage fuel combustionessential for resolving issues like poor fuel economy, rough idling, or a lit check engine light due to faulty upstream or downstream sensor readings.. OEM Design Our oxygen sensor is crafted from premium materials for accurate readings. Built for durability and reliability, it meets OEM standards, supports smooth engine performance, and offers easy installation.. Confidence with Coverage Includes sensors, coverage for lasting performance and peace of mind on the road..

NOTES - Please enter your specific vehicle model before purchase and confirm whether the oxygen sensor plug is completely consistent with your old parts. If you have any questions, please feel free to contact us and reply to you within 24 hours. APPLICABLE MODELS - O2 Sensor Replacement for Wideband Controllers with 30-4110 Digital Wideband UEGO Gauge, 30-0300 X-Series Digital AFR Gauge, 30-0310 X-Series Inline Wideband UEGO AFR Controller Most 4.9 LSU Wideband Controller Gauge. INTERNAL AND EXTERNAL DESIGN - Built-in heater accelerates ignition and improves fuel efficiency Built-in white ceramic up to 650 OEM chip improves accuracy The breathable filter membrane ensures that the sensor can be insulated. ADVANTAGES - JOYOMSTW oxygen sensor is made of stainless steel and other materials, which can effectively detect the oxygen content in the gas. Timely replacement can improve engine performance and save fuel Plug and play, easy to install. IMPORTANCE - If the oxygen sensor fails, the fuel injection system cannot obtain relevant information, which will increase fuel consumption. The engine has unstable idle speed, misfire and other faults, which should be replaced in time.

Precision Wideband Sensing for Tuning Utilizes advanced 4.9 wideband technology to deliver real-time, proportional oxygen data for accurate AirFuel Ratio AFR monitoring. Essential for optimizing performance in high-RPM, turbocharged, or modified engines.. Extreme Environment Durability Engineered with high-temperature-resistant materials for rapid response and sustained accuracy. Features a double laser-welded, fully submersible stainless steel body for superior corrosion resistanceideal for track use or demanding daily driving.. Direct Plug Play for AEM Systems Exact replacement for AEM X-Series UEGO gauges 30-4110, 30-0300 and Inline Controllers 30-0310. Compatible with most 4.9 wideband setupsensures hassle-free installation with factory connectors.. Critical Fitment Verification Replaces part numbers 17025, 0258017025, 304110, 300300, 300310. IMPORTANT Verify sensor plug type cable length match your AEM unit via Amazon's fitment tool or product images before purchase.. 12-Month Warranty Support Backed by a 12-month warranty against defects. Trusted by DIY tuners and pros for reliable AFR datacontact us anytime for replacement or technical help..

Part NameWideband Gauge 52mm 2 116'' O2 Air Fuel. Part Number30-0300. ApplicationFits for AEM.

Part NameWideband Gauge 52mm 2 116'' O2 Air Fuel. Part Number30-0300. ApplicationFits for AEM.

Part NameWideband Gauge 52mm 2 116'' O2 Air Fuel. Part Number30-0300. ApplicationFits for AEM.

Part NameWideband Gauge 52mm 2 116'' O2 Air Fuel. Part Number30-0300. ApplicationFits for AEM.

Replacement LSU 4.9 Oxygen Sensor - Also called the Lambda Sensor, it measures the ratio or proportion of oxygen mixed in the fuel of your vehicle, which is essential for the proper operation of your catalytic converter. The vehicle then determines whether it is necessary to adjust the ratio for it to perform properly.. Compatible Replacement for AEM AFR Gauge Controllers - LSU 4.9 Wideband Controllers Gauges. This replacement Air Fuel Ratio Lambda Sensor helps improve engine performance and fuel efficiency by reducing CO2 and other harmful emissions, which extends the life of your catalytic converter.. Replaces Part 17025, 0258017025, 304110, 300300, 300310, which is also compatible with AEM Wideband Controllers with part numbers 30-4110 Digital Wideband UEGO Gauge, 30-0300 - X Series Digital Wideband UEGO AFR Gauge, 30-0310 - X Series Inline Wideband UEGO AFR Controller.. OEM Fit, Quality Finish - While this is not a genuine OEM oxygen sensor, it is a direct replacement manufactured by AA Ignition. This AEM wideband sensor will match or exceed factory specifications and is built to withstand a high temperature environment for longer durability.. Lifetime Warranty - This replacement wideband O2 sensor comes complete with a lifetime warranty. If the part ever fails on your vehicle, simply contact us for a free replacement. Save money off of dealer prices by purchasing this part and replacing it yourself. See our website for full details. See our website for full details..

OE Reference Part Number The LSU 4.9 Oxygen Sensor, also known as the Lambda Sensor, plays a important role in monitoring the oxygen-to-fuel ratio in your vehicle. Our automotive replacement oxygen o2 sensor can replaces 17025, 0258017025, 300300, 300310, 304110, 234-5107. Please check your vehicle information before purchasing.. Application STZJAYE oxygen 02 sensors oem 17025, 300300, 300310, 304110 compatible with most 4.9 LSU Wideband Controller Gauge, for AEM 30-4110 Digital Wideband UEGO Gauge, for AEM 30-0300 X-Series Digital Wideband UEGO AFR Gauge, for AEM 30-0310 X-Series Inline Wideband UEGO AFR Controller.. Replacement for AEM AFR Gauge Controller The Stzjaye Air-Fuel Ratio AFR Lambda sensors can enhancing engine performance and fuel efficiency by minimizing the emission of CO2 and other harmful emissions, ultimately extending the lifespan of your catalytic converter.. Easy Installation Oxygen Sensor Manufactured to OE standard specification fit form and function. Our o2 sensor can directly replaces the old parts. How to Replace the Oxygen Sensor STEP1. Diagnostic trouble codes to identify the faulty sensor STEP2. Disconnect the oxygen sensor STEP3. Remove the oxygen sensor STEP4. Compare the faulty oxygen sensor with the replacement sensor STEP5. Install the new sensor and connect the harness Clear the codes then start the vehicle..

Material 6061-T6 aluminum. 16 Gauge. Wall Thickness 0.065. Tubing outside diameter 1-78 inch 48mm. Length 3 Feet. Commonly used in industrial, automotive, marine and aerospace industry Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping.

Part NameWideband Gauge 52mm 2 116'' O2 Air Fuel. Part Number30-0300. ApplicationFits for AEM.

Designed specifically for AEM wideband controllers 30-4110 Digital Wideband UEGO Gauge 30-0300 X-Series AFR Gauge 30-0310 Inline AFR Controller. Compatible with most LSU 4.9 wideband systems.. EM Replacement Information Direct replacement for part numbers 17025, 0258017025, 304110, 300300, 300310. Please verify your sensor's connector type and length match before purchasing to ensure proper fitment.. High Performance Wideband Sensor Our oxygen sensor features an advanced sensing element that provides precise oxygen level measurements in exhaust gases, ensuring accurate airfuel ratio monitoring for optimal engine performance and efficiency.. Premium Quality Construction Built with high-temperature resistant materials and double laser-welded stainless steel housing for durability. The waterproof design ensures long-lasting performance in all driving conditions.. Reliable Performance This sensor delivers consistent, accurate readings to help maintain proper engine tuning. Includes all necessary components for easy installation on compatible systems..

Part NameWideband Gauge 52mm 2 116'' O2 Air Fuel. Part Number30-0300. ApplicationFits for AEM.

Legal in California only for racing vehicles which may never be used upon a highway. AEM strongly recommends that users never exceed a 50 percent methanol concentration when using any AEM Water Methanol system or component. Methanol is a toxic and highly flammable chemical 100 percent Methanol ignites easily and burns vigorously with an almost undetectable flame.

Engineered for a Perfect FitNo guesswork, no stress. Our 17025 Oxygen Sensor is precision-built to fit Most 4.9 LSU Wideband Controller Gauge, AEM 30-4110 Digital Wideband UEGO AFR Gauge, AEM 30-0300 X-Series Digital Wideband UEGO AFR Gauge, AEM 30-0310 X-Series Inline Wideband UEGO AFR Controller like it came straight from the factory.. Replace Part NumberThe O2 Sensor Replacement for OE Number 17025, 0258017025, 304110, 300300, 300310.. Drive Farther, Spend Less Enjoy more miles per gallon and fewer stops at the pump Smart sensing technology maximizes fuel efficiency and helps you save money with every drive.. Built to Endure, Designed to Perform Crafted with premium platinum and ceramic components to withstand extreme heat and pressure ensuring long-lasting performance and peace of mind.. Instant Response, Smoother Ride Experience faster acceleration and cleaner emissions. Our sensor delivers real-time data to your engine for a smoother, more responsive ride every time you hit the road.. Tested Tough, Guaranteed to Last Every unit is rigorously tested for quality and reliability. Plus, its backed by a 12-month warranty because you deserve parts you can trust..

AEM Gauge - 30-0301.

Compact size 5.5 long x 2 diameter. ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. see Fittings Adapters. All filter assemblies feature an O-ring for positive sealing in high pressure applications.. CNC-machined from 6061-T6 aircraft aluminum.. Made in USA.

Ideal for carbureted or EFI vehicles. Easy-to-install Plug Play harness and sensor included. 24 green LED display lights provide immediate reference to monitored engine function. Three digit readout in center. Each gauge comes with interchangeable blacksilver bezels and blackwhite faceplates. 0-5V analog output included for use with data loggers and virtually any engine management system. Auto-dimming gauge face and read out lighting. Brass sensor included. Standard 52mm 2-116 gauge housing.

Made of high-carbon steel with poly-vinyl chloride handle grips. Cuts and strips 10-22 gauge automotive primary wires. Crimps insulated and non-insulated ignition terminals. Crimps 7-8mm spark plug wire ends.

Interchangeable black and white faceplates included for customizing gauge appearance. Bosch 4.9 LSU wideband sensor and weld-in bung included PN 30-4110. No free air sensor calibration required ever. A 2-116 inch gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere. Interchangeable black and silver bezels included. 52mm 2-116 gauge housing. 0-5V analog output 10-20 AFR range only.

Includes Silver Bezel White AFRLambda Faceplate. AEM30-0300-ACC. X-series. 0.352 ounces.

Complete system includes harness, boost hose, on-board 29 psig pressure sensor external 75 psia optional, boost solenoid, gauge display and all necessary fittings. Two user selectable boost settings with peak boost memory. User selectable Overboost alarm includes two timed shutdown levels at 10 and 20 Overboost. No external interface required for programming. User configurable gauge includes 24 scalable LEDs, and interchangeable bezel, pin guide and faceplate to customize look of display.

-Replacement for 0300 with 0400 serial number. -Improved durability compared to Bosch 4.9.. -Compatible with unleaded and leaded race fuels.. -Faster response time..

Accurate to 0.1 AFR. Never requires free-air calibration when used with an AEM Controller and connector plug. Specifically designed for use with AEM Wideband UEGO controller Part Number 30-4110. Replacement sensor only.

AEM Gauge - 30-0302.

X-Series Inline Wideband UEGO Controller features a weather-resistant, low-profile enclosure with status LEDs. The X-Series Inline Controller includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet CANbus output. X-Series digital wideband technology gives these controllers the ability to read and report values that other controllers do not, which can deliver more optimized engine tuning and a safer overall operating condition. Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. When tuning an engine using wideband AFR feedback control on an inertia dyno, dead time affects the data you are looking at because it is reported in a different operating location than when it actually occurred.

All AEM 12 Position Trim Pots include a flying lead with a weatherproof over mold and 12 inch insulated wires that are color coded in black, white and red. 38 inches mounting hole required. 12 inches wrench used to tighten the jam nut.

Includes Brass pressure sensor AEM 30-2131-100 100 PSIG Brass Sensor Kit includes a brass pressure sensor. Pressure range 0 - 100 PSIG The brass sensor kit has a measuring range of 0 to 100 PSIG. Item weight 600 grams The total weight of the AEM 30-2131-100 100 PSIG Brass Sensor Kit is 600 grams. Dimensions 3 x 5.5 x 3 centimeters The item dimensions of the kit are 3 centimeters in width, 5.5 centimeters in length, and 3 centimeters in height. Style Rugged The AEM 30-2131-100 100 PSIG Brass Sensor Kit boasts a rugged style. Output type Analog The kit has an analog output type. Mounting type Flange Mount The AEM 30-2131-100 100 PSIG Brass Sensor Kit features a flange mount. Response time 0.001 seconds The kit has a response time of 0.001 seconds. Material Brass The AEM 30-2131-100 100 PSIG Brass Sensor Kit is made of brass.

Simple to install, takes less than a minute. Polypropylene housing-rugged material that is compatible with high concentrations of methanol. Large Filtering Area assure long service life and does not significantly reduce flow. Completely serviceable assembly, can be disassembled, cleaned and reused for a long service life.

Gauge pressure range 0-100psi.

Gauge temperature range 100-300F. Complete stand alone gauge requires no additional sensors or programs to operate. LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions. Includes 0-5V analog output for routing to engine management system or data logger. Included bezels and face plates allow you to personalize the look of your gauge.

Gauge pressure range 0-150 psi. Item weight 0.35 kilograms. Part number 30-4407. Display size 52 millimeters. Material Stainless Steel. Compatible with data loggers and engine management systems. Includes interchangeable silver and black bezels and black and white faceplates.

AEM30-2013.

Includes brass pressure sensor.

Gauge pressure range -30-50psi.

AEM30-0301-ACC. X-Series. Pressure Gauge. 2.45 x 2.45 x 0.7 inches.

Black Transmission Oil Faceplates. AEM30-0302-ACC. White Water. X-Series.

Reads data channels from 2008 MY vehicles through the OBDII port. Country of Origin United States Reads and clears Diagnostic Trouble Codes DTCs. Package Weight 0.272 kilograms. Easy to install and wire power and data come from OBDII port using supplied connector. Model Number 30-0311 2-116th 52mm gauge diameter for easy mounting in gauge pods. Reads data channels from 2008 MY vehicles through the OBDII port Positive locking connector provides secure connection. Auto dimming sensor delivers ideal display brightness 24 green outer LEDs for quick reference to engine parameter. Compatible with vehiclesystem voltages up to 16V. Slim 0.825 overall gauge depth and 0.200 cup depth mount them virtually anywhere.

AEM universal 18 NPT Air Temperature Sensor Kit.

-Brass body, with high quality sealing which makes it impervious to fluids.. -Accurate with 3 margin for error.. -Weather resistant connector and pins included. -Analog Data Scaled in Charts.

X-Series Gauge Compatibility A precision mount designed to securely hold 30-0300 and 30-0334 wideband gauges, supporting installation on either the dashboard or a roll cage.. Compatible Mount Features a standard-style interface, allowing the instrument to be connected to any existing mounting system within the vehicle.. Flexible Positioning By utilizing ecosystem accessories, the instrument can be mounted on suction cups, clamps, bases, or roll cage brackets.. Low Profile Design Bracket adds minimal depth to gauge housing, keeping installation clean while maintaining full display visibility.. Important Note This is a third-party replacement part, Brand names are used only to indicate Compatible with AEM 30 0300 30 0334 X Series Wideband Gauge,Compatible with GoPro This product is not affiliated with or endorsed by any brand owner.This is a 3D printed product made of PETG..

Package Weight 0.317 pounds. The package length is 13.462 centimeters. The package height is 13.716 centimeters. The package width is 13.716 centimeters.

One wire to sensor ground and one wire to sensor signal. Wire strip length is 0.175 inches to 0.200 inches. Thread size 18 inches. Operating temperature sensor tip -40C to 200C, connector -40C to 150C.

Direct fit for Bosch LSU 4.9 replacement part sensor. Long length wiring loom to accommodate most applications. Plug play harness for 30-4110 AFR gauge. Quick connect connectors.

automotive-instrument-panel-gauges.

What A Easy Helper Featuring sweeping 24-color-coded LED display and four-digit central readout, the faceplate of wideband gauge is two-sided and reversible. Thanks to it, the afr gauge can switch between 3 display modes of air-fuel-ratio, lambda, oxygen percentage at will, by that means you are able to effectively but quickly monitor your vehicle's conditions.. Core Technology To maximize your engine's power while stay safe, an air fuel ratio gauge kit is must-have The Gledewen AFR gauge helps to identify sensitively every slight fluctuations of air-fuel ratio and report precise and reliable reference to the car engine in real-time, and in particular it matches with LSU4.9 UEGO, ensuring its faster and more precise response20ms typical.. TWO Calibration ModesResistor Trim ModerCAL or Free Air ModeACAL It is up to you The supplied UEGO sensor is factory calibrated via a trim resistor, integral to the sensor connector, and rCAL is the recommended calibration mode for best accuracy, for most users, there is no further action or calibration required.. Installation InstructionsMount the 52mm gauge, connect power and ground wires, and install the LSU 4.9 sensor into the exhaust bung for quick setup.. 12-MONTH WARRANTYIf the wideband AFR sensor controller gauge kit fails, stops working or any other problems, you can rely on our service of carefree REPLACEMENT or REFUND.

The X-Series wideband UEGO AFR sensor controller gauge PN 30-0300 features a modern, visually striking faceplate and new seven-segment, center display that is 87 larger than the 30-4110 AEM. The gauge includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet CANbus output for data logging. X-Digital wideband technology gives these controllers the ability to read and report values that other controllers do not, which can deliver more optimized engine tuning and a safer overall operating condition. Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. When tuning an engine using wideband AFR feedback control on an inertia dyno, dead time affects the data you are looking at because it is reported in a different operating location than when it actually occurred.

-30inHg35psi. Black Bezel. Black Faceplate.

Controller gauge and hardware sold without wideband sensor. Weld-in bung included. 52mm 2-116 gauge housing. RS232 Serial Output. Interchangeable blackwhite faceplates and blacksilver bezels included.

pbAIRFUEL RATIO UEGO GAUGEbOur wideband O2?AFR gauge?has a digital LED display and LED needle that changes color as the AFR changes from rich to thin Each gauge is equipped with black and silver bezels and black and white faceplates for multiple color combinations and customized appearance.p. pbWIDELY COMPATIBILITYbThe 52 mm 2-116 inch gauge housing ensures that it fits most instrument pods and can be installed remotely almost anywhere. Our digital wideband gauge have 0-5V analog output, which can be used with data loggers and almost all engine management systems. Confirm compatibility by model number rather than brand or image. p. pbPREMIUM QUALITYbAccurate AF ratio data is crucial when adjusting the engine. The 4.9 LSU sensor provides speed and accuracy for the controller, it can react quickly even for every 0.1 air-fuel ratio change, allowing you more time to respond and protect your engine safety. At the same time, it never requires free-air calibration when used with our wideband O2 UEGO AFR gauge.p. pbINSTALLATIONbThanks to the 52mm housing of the wideband gauge, you can install it almost wherever feasible. Plug and play, very convenient. In order to help you understand the accessories and installation details, we have provided an installation instruction in the package.p. pb100 SATISFACTION SERVICEbIf you have any questions or dissatisfaction, please email us and we will help you solve it perfectly - 24 Months Warranty 24 Hours Service.p.

High-Precision Monitoring The 30-0300 Wideband UGEO AFR Gauge, offering accurate and real-time air-fuel ratio AFR data to optimize engine performance, reduce emissions, and boost power.. Real-Time Data Feedback The 52mm 2-116 gauge displays real-time AFRLambda values clearly, providing drivers and tuners with critical information to maintain engine efficiency and adjust fuel mixture for optimal performance.. Dual Calibration Modes Supports Resistor Trim Mode rCAL and Free Air Mode ACAL for flexible calibration. The factory-calibrated, offering high accuracy right out of the box with no extra setup required for most users.. Easy Installation The kit includes a detailed installation manual and all necessary wiring for quick setup.. 36-Month WarrantyIf the wideband gauge kit fails, stops working or any other problems, you can rely on our service of carefree REPLACEMENT or REFUND.

The gauge includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet CANbus output for data logging. 30-0300 UEGO AirFuel Ratio Gauge is a broadband UEGO AirFuel Ratio Controller AFR and instrumentation in one, center display that is 87 larger than the 30-4110. Thanks to its 52mm housing, the versatile gauge will fit into the majority of gauge pods. The gauge also features interchangeable faceplates and bezels, making it simple to achieve the ideal look for your car. To help you get started, the device comes with everything youll need for a hassle-free installation.. This air fuel ratio gauge comes with 4.9 LSU sensor, display AFR values in hundredths of a second, The readings are accurate and fast, that report precise and reliable reference to the car engine in real-time, offer more optimized engine tuning and safer overall operating conditions. Note Free air calibration is not required when used with our Wideband O2 UEGO AFR gauge.. Notice For any reason, if you have any questions, please feel free to contact us, we will be happy to help you.

AEM 30-0303 52MM X-SERIES DIGITAL VOLTAGE VOLTMETER VOLTS GAUGE 818V BLACK.

Package Dimensions 13.716 H x 13.716 L x 13.462 W centimetres. Country of Origin United States. Package Weight 0.430 kilograms.

High-quality sealed sensor housings Durable and reliable design ensures accurate temperature readings. Air Temp Sensor with 38' NPT Male Thread Allows for easy installation and connection. Includes Aluminum Bung, Connector Pins Comprehensive kit for all your temperature sensing needs. Weighs 0.07328 kilograms Lightweight and compact for convenient use. Dimensions 7 cm width x 12 cm length x 12 cm height. Upper temperature rating 120 degrees celsius Suitable for high temperature applications. Mounting type Flange Mount Easy to install and secure. Measuring range 0 - 2.5E2 F Wide range of temperature measurement. Included components Air Temp Sensor, Aluminum Bung, Connector, and Pins Complete set for temperature sensing.

Triple Gauge Kit for Pro-Level Monitoring This gauge kit includes Oil Pressure 30-4401, Turbo Boost 30-4406, and a Wideband AFR gauge 30-4110, giving you complete insight into your engines performance with precise, real-time data. Compact, Easy-to-Mount Design At just 0.825 overall depth, this 52mm boost gauge combo mounts virtually anywhere, even in tight pods the low-profile design blends seamlessly into your cockpit. Advanced Display Data Output With a larger center LED, 24 outer LEDs, and user-selectable warnings, the AFR gauge Wideband kit delivers fast, easy-to-read updates, plus analog and CANbus outputs for EMS or data loggers. Comprehensive Monitoring Across Fuels With a Wideband gauge for multiple fuels, plus oil pressure and turbo boost tracking, this 3-gauge combo gives you complete visibility into your engines performance so you can tune with confidence. All-in-One Kit with Extras Complete with wiring, sensors, and MAPerformance lanyards, this fuel pressure gauge kit includes everything you need for installation, just mount, connect, and start monitoring.

Warranty2 Years. Improve fuel efficiency Stable performance Durable. Placement on Vehicle17025 Upstream, Front, Pre-cat 17025 Sensor Type Heated. 17025 Wire Count 5-Wire 17025 Total Length 1000mm.. Direct Fit Application17025 wideband oxygen sensor replacement for CHEVROLET CRUZE 2015-2011 1.4L, 1.8L, 2.0L, for FORD ESCAPE 2015-2011 1.6L, 2.0, 2.5L, for FORD FIESTA 2015-2011 1.0L, 1.6L, for FORD FOCUS 2015-2011 2.0L ELETRIC, for HONDA ACCORD 2015-2011 2.0L, 3.5L, for HONDA CIVIC 2015-2011 1.3L, 1.5L, 1.8L, for HONDA CR-V 2015-2011 2.4L, for HONDA ODYSSEY 2015-2011 3.5L, for TOYOTA CAMRY 2015-2011 2.5L, 3.5L, for TOYOTA RAV4 2015-2011 2.5L, 3.5L. Interchange Part Number17025, 0258017025, 30-4110, 304110, 30-0300, 300300, 30-0310, JSB-7025, 30-2004. Automotive-leader Brand ServiceEasy installation. Meet OEM standards. Fully matched with the original model. Please confirm the part number and your vehicle information e.g Year, Make, Model Engine before placing an order. If you have any questions about our products, welcome you contact us by email at any time.I will help you solve the problem as soon as I receive the email..

Direct Replacement Wide Compatibility Exact replacement for AEM part numbers 30-4110, 304110, 30-4100, 304100, 37301001, 30-0300, 300300 compatible with EFI, carbureted applications and engine dynamometers, ensuring seamless fitment. High-Precision Monitoring Visibility Features a digital LED display and sweeping LED needle that changes colors as AFR shifts from rich to lean, allowing accurate, real-time monitoring with a simplistic yet durable design-alerts to even 0.1 AFR changes to protect your engine. Bosch 4.9 LSU Sensor No Calibration Needed Includes a high-performance Bosch 4.9 LSU wideband sensor and weld-in bung faster light-off time and lower current draw than older 4.2 LSU sensors, with no free air sensor calibration required-ever. Multi-Fuel Compatibility 0-5V Output 0-5V analog output 10-20 AFR range only works with data loggers and most engine management systems supports E85 6.6-13.21 AFR, Ethanol 6.14-12.31 AFR, Methanol 4.4-8.81 AFR and Lambda 0.68-1.36 values. Customizable Design Complete Kit 52mm 2-116 gauge housing fits most gauge pods and can be remotely mounted includes interchangeable blacksilver bezels and blackwhite faceplates for custom appearance, plus all necessary installation accessories harness, connectors, bung.

HIGH PERFORMANCEOur wideband sensor use a more sophisticated sensing element that provides a signal that is proportional to the amount of oxygen in the exhaust, helps ensure your engine is constantly monitored and operating efficiently, while maximizing performance. PREMIUM QUALITYDurability matters, that is why our o2 sensor is crafted from high temperature resistant material for quicker response times. Double laser-welded stainless steel body is totally submersible to seal tight for long life. FITSAEM Wideband Controllers with part numbers 30-4110 Digital Wideband UEGO Gauge, 30-0300 X-Series Digital Wideband UEGO AFR Gauge, 30-0310 X-Series Inline Wideband UEGO AFR Controller Most 4.9 LSU Wideband Controller Gauge. REPLACE OE NUMBER17025, 0258017025, 304110, 300300, 300310. A lot of buyers brought the wrong AF gauge sensor because they don't pay attention to the plug and the length of the sensor. Please check these 2 features before purchase. 12-MONTH WARRANTYIf the wide band lambda sensor fails, stops working or any other problems, you can contact us through amazon message to apply the service of carefree REPLACEMENT or REFUND.

This AEM 2 gauge kit is a popular combo for commonly used gauges and applications. Our official MAPerformance lanyard included as a special bonus. AEMs 30-0306 X-Series -30inHg35PSI -12.5BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features. The X-Series Wideband UEGO AFR Sensor Controller Gauge PN 30-0300 measures 2 116th-inch 52mm in diameter, and features a modern, visually striking faceplate and new seven-segment center display.. X-Series Wideband UEGO AFR Controller Gauge were fastest responding wideband airfuel ratio controllers in an independent test vs. 17 competitor wideband AFR controllers. Includes Bosch 4.9LSU wideband UEGO sensor. Slim 0.825 overall gauge depth and 0.200 cup depth mount them virtually anywhere Black faceplates and bezels included..

Patented X-Digital Technology makes it the Fastest Responding Wideband AFR Controller OBDII pass-through provides AFR readings through the factory ECU CAN-bus Ideal for users with piggyback programmers or open source tuning software. Use the factory 02 calibration or free-air calibrate using buttons on faceplate Compatible with vehiclesystem voltages up to 16V Optional outputs for 0-5V RS232 for data logging and feedback control requires wiring. Can display AFR values in hundredths of 52mm gauge diameter and slim 0.825 gauge depth Gauge cup depth only .200 deep. Auto dimming feature User configurable display via buttons on the gauge face for changing AFR values, Lambda and O2, 3- or 4-digit display and OBDII output settings if necessary.