Integrated Quiet Cooling Fan Equipped with a pre-installed 120mm low-noise cooling fan, this cabinet ensures efficient airflow to maintain optimal operating temperatures for sensitive IT and AV equipment.. Adjustable Mounting Depth Features fully adjustable vertical mounting rails, allowing customization of internal depth to accommodate various 19 rack-mounted devices, ensuring a secure and tailored fit.. Secure Access with Lockable Panels Includes a lockable tempered glass front door and removable side panels with locks, providing both visibility and enhanced security against unauthorized access.. Robust Wall-Mount Design Constructed from durable cold-rolled steel with a black powder-coated finish, this cabinet supports a maximum load capacity of 110 lbs 50 kg and is designed for easy wall mounting.. Efficient Cable Management Designed with removable top and bottom cable management panels, facilitating organized cable routing and improved airflow within the cabinet..

All-in-One Network Rack The ECHOGEAR 9U wall mount rack comes fully loaded with 2x 1U shelves, pre-mounted fans, a lockable front door, and bonus hardware to give your AV setup the HGTV-worthy makeover it deserves.. Quick Easy Installation Mount it securely on wood studs or concrete in under 30 minutes. With a witty manual by Minnesotans yes, its nice, youll be up and running faster than your Wi-Fi. Rock-Solid Build Made from heavy-duty steel, this rack holds up to 132 lbs, all while managing your cables like a pro. Pop off the side panels no tools needed to keep your setup as clean as your favorite dad joke.. Cool as Your Cousins Convertible Keep your gear chill with the vented design and 2x pre-mounted fans. Your equipment stays frosty, even if your streaming habits heat up.. Compact Powerhouse With 9U of rack space and a 600mm depth, this rack fits right into your back closet but has room for all your networking, AV, and DVR gear. Small footprint, big potential.. Need Help We Got This Whether its installation troubleshooting or accessorizing with extra shelves, our Minnesota-based product nerds are here 7 days a week to keep you and your rack happy..

COST-EFFECTIVE This lightweight, 2-post rack is a sturdy and safe solution for mounting equipment at a fraction of the cost of conventional racks. Engineered to meet EIA-310 rack-mount standards.. IMPROVED EFFICIENCY This open frame rack enables you to place rack-mount equipment on any surface in your office. It supports up to 110.5lb 50kg and has a total product height of 16.1in 41cm.. EASY TO SETUP The 2 post rack is easy to assemble and includes a pack of 20 M5 screws and cage nuts.. EXTREMELY VERSATILE This lightweight, but sturdy server rack fits a variety of your smaller equipment, such as audio video, media, data, computer and home stereo and theater applications..

The ECHOGEAR 10U server rack comes with everything you need to rack em' up including the entire open frame rack structure, 2x 1U vented shelf 12.12 deep, and 25x rack mounting screws. Is it Christmas in here or is that just me. This rack has a 20.40 depth design meaning it's perfect and practically begging for your networking, AV, and rack mount components up to 19 deep.. Let's hang Rack can hold up to 150 lbs of your gear securely to the wall. Includes all wall mount rack hardware in the box so you can skip the Home Depot run. Assembly required, but it's simple. With all the included hardware witty instructions, you'll have your rack ready in under 20 minutes.. Stay cool The open frame design of this network rack and included vented shelves help optimize airflow, keeping even today's hottest, high-end networking and AV components cool.. ECHOGEAR cares. We're planting a tree for every 10U rack sold. Hit a snag with install Our Minnesota-based product nerds are available 7 days a week to help out..

Specification 9U Swing Out Wall Mount Rack, 16inch apart Mounting holes 18inch Depth Square hole or tapped hole installation can be switched with each other. SolidDurable Network rack wall mount is made from Cold Rolled Steel Static load bearing 110 lbs50kg, sliding load 55 lbs25kg Electrostatic powder coat preventing rust and corrosion. Design Features Open Frame structure of wall mount server rack, optimized heat dissipation 180 degrees swing gate for rear cable access from both sides. Widely Applicable Open frame server rack fits for 19inch equipment Suitable choice of data rack and audio rack Various specifications including height of 6U, 9U, 12U, 15U, 18U, depth of 18inch and 24inch Compliant EIAECA-310-E. Easy Installation Provide corresponding accessories, instructions, drilling hole template and video explanation for reference.

DURABLE BUILD Constructed from high-quality Cold Rolled Steel, the NavePoint Consumer Series 9U network cabinet boasts a sturdy, welded frame. Fitting EIA standard 19 networking equipment, this server cabinet confidently supports up to 110 lbs, providing a resilient base for your vital IT gear and equipment. CONVENIENT DESIGN This 9U cabinet features a reinforced, heat-treated, tempered glass front door with a security lock. Perfect for applications requiring both security and accessibility, its compact design of 17.72L x 21.65W x 19.17H offers a practical solution for space-constrained settings. EASY CUSTOMIZABLE EQUIPMENT SET UP - The 9U IT cabinet, with removable side panels and security locks, offers customization at its finest. Whether it's for an efficient device or cable management, this data cabinet ensures secure, adaptable configurations that suit your networking server requirements. ENHANCED VENTILATION SECURITY - Built-in fans and flow-through ventilation work to prevent overheating, ensuring optimal operation of your equipment. The reinforced, lockable tempered glass front door not only boosts security but also facilitates easy monitoring of installed equipment. SAFETY COMPLIANCE - Compliant with CE, EIAECA-310-E, HIPAA, NEMA Rated Type-1, PCI. Compliance with these standards ensures that the cabinet meets specific quality, safety, and environmental requirements..

Save valuable floor space 12U wall mount server cabinet Dimensions 24.25 H x21.65 W x17.72 D. MAXIMUM MOUNTING DEPTH is 14.2.. Keep critical network equipment secure glass door and side panels are lockable to prevent unauthorized access Front door can be installed on either side of the front of the cabinet to satisfy your door swing orientation preference. Easy equipment configuration Fully adjustable mounting rails and numbered U positions, with square holes for easy equipment mounting with top and bottom punchout panels for easy cable access. Durability Made of high quality cold rolled steel holds up to 110lb 50kg Easy Assembly Required. PCI HIPPA and EIAECA-310-E compliant.

Save valuable floor space 9U wall mount server cabinet Dimensions 19.02 H x21.65 W x17.72 D.Maximum mounting depth is 14.2. Keep critical network equipment secure glass door and side panels are lockable to prevent unauthorized access Front door can be installed on either side of the front of the cabinet to satisfy your door swing orientation preference.. Easy equipment configuration Fully adjustable mounting rails and numbered U positions, with square holes for easy equipment mounting with top and bottom punchout panels for easy cable access. Durability Made of high quality cold rolled steel holds up to 110lb 50kg Easy Assembly Required. PCI HIPPA and EIAECA-310-E compliant.

Sturdy Open Frame Server Rack made from Cold Rolled Steel Rear brackets enhance stability Weight capacity of 110lbs Electrostatic powder coat preventing rust and corrosion. Nimble Access Wall Mount Network Rack facilitates equipment installation, inspection and cable management. Space-saving Wall Mount or Floor Mount, its up to you. Widely Applicable Open Frame Rack with both 12-24 threaded holes and square holes Available in 6U9U12U15U and 15.8in24.8in depth. Easy Installation EIAECA-310-E complaint 9U Wall Mount Rack provides corresponding accessories, instructions and video explanation for reference.

Thermostat-Controlled Cooling Dual quiet fans automatically activate at preset temperatures, providing efficient airflow to reduce internal heat and extend the lifespan of your servers, switches, patch panels, and other rack-mounted devices. Space-Saving Design Compact 9U wall mount rack 21.7 W 17.7 D 19.7 H with 14.2 max mounting depthideal for networking, IT, AV, and surveillance system installations. Durable Build 9u rack is construct from cold-rolled steel with a 110 lb 50 kg weight capacity and rust-resistant powder coating for long-lasting use in office, studio, or industrial environments. Efficient Secure Lockable front and side doors with removable top and bottom panels for easy access and cable management. Universal CompatibilityServer rack supports all standard 19 rackmount devices, including servers, network switches, DVRs, and audio equipment. Includes mounting hardware. Available in 6U, 9U, and 12U sizes.

MOUNT YOUR SERVERS VERTICALLY This 8U vertical wall mount server rack cabinet features a space saving low profile design provides up to 30 of mounting depth while only extending 15 from the wall. INCLUDES AN EXTRA 2U OF MOUNTING SPACE 2U of angled 2 post horizontal mounting space is provided above the vertical server mounting rails for switches, patch panels, and routers up to 4.7 in depth. TECH SPECS 8U 19 Vertical Wallmount Enclosure Pre-Assembled EIAECA-310-E Rear Bottom Cable Routing 200 lb 90 kg Weight Capacity Mounting Screws Incl. Optional 2x 120mm Fans. MULTIPLE SECURITY FEATURES Locking side panels w 4 keys, for multiple levels of security cabling can routed into the cabinet from the wall without exposing cables for extra security.

All-in-One Network Rack The ECHOGEAR 6U wall mount rack comes fully loaded with 2x 1U shelves, pre-mounted fans, a lockable front door, and bonus hardware to give your AV setup the HGTV-worthy makeover it deserves.. Quick Easy Installation Mount it securely on wood studs or concrete in under 30 minutes. With a witty manual by Minnesotans yes, its nice, youll be up and running faster than your Wi-Fi. Rock-Solid Build Made from heavy-duty steel, this rack holds up to 132 lbs, all while managing your cables like a pro. Pop off the side panels no tools needed to keep your setup as clean as your favorite dad joke.. Cool as Your Cousins Convertible Keep your gear chill with the vented design and 2x pre-mounted fans. Your equipment stays frosty, even if your streaming habits heat up.. Compact Powerhouse With 6U of rack space and a 600mm depth, this rack fits right into your back closet but has room for all your networking, AV, and DVR gear. Small footprint, big potential.. Need Help We Got This Whether its installation troubleshooting or accessorizing with extra shelves, our Minnesota-based product nerds are here 7 days a week to keep you and your rack happy..

Size 19.7 H x 22.4 W x 17.7 D. Total Usable Space of 13.75 front to back.. Heavy Duty Tedgetal SE series wall mount cabinet is made from SPCC cold-rolled steel with maximum loading capacity of 133lbs60kgs for equipments.. Security and Protection Locking front door and side panel prevent unauthorized access to equipments.. Easy Access Quick open side panel for easy maintenance.. Warranty 3 years limited warranty and lifetime technical supports..

SPECIFICATIONS - The NavePoint 6U open frame rack, crafted for 19 rack equipment, is constructed from 1.5mm SPCC Cold Rolled Steel. With dimensions of 15.8L x 20W x 13.65H and a depth of 16, this sturdy wall mount server rack supports up to 200 lbs.. ACCESS COOLING - Enhancing server and network performance, this 6U wall mount network rack features an open design for optimal airflow, making equipment setup and cable management more accessible in a wall-mounted configuration.. VERSATILITY - This 6U data rack arrives flat-packed, streamlining the assembly process. It's adaptable for 2-post mounting, ideal for small server environments where efficient use of space is essential.. CABLE MANAGEMENT - Equipped with slots and points for cable organization, this 6U server rack ensures a tidy arrangement of wires, contributing to the maintenance and appearance of networking areas.. SAFETY COMPLIANCE - All NavePoint products are built to industry standards..

19-INCH COMPATIBILITY ADJUSTABLE DEPTH This 8u rack supports standard 19-inch server racks, shelves, patch panels, UPS, data and networking equipment. EIA-310 compliant. Adjustable mounting depth from 9.7 to 15.9 247403 mm fits shallow IT equipment. HEAVY-DUTY STRUCTURE Engineered to hold up to 110lb 50kg. 16 standard wall stud spacing allows secure anchoring to existing construction framework for stable equipment mounting. READY FOR WALL INSTALLATION Ships flat-packed with fold-out sides for fast setup. Includes M625 wall mounting screws, 12-24 cage nuts and screws. Four keyhole mounting holes enable quick installation and removal. DURABLE COLD ROLLED STEEL FRAME Constructed from heavy duty steel with powder-coated finish for long-term strength and corrosion resistance. OPEN-FRAME DESIGN Wall mount bracket provides easy cable access and airflow, ideal for network closets, AV setups, and IT environments.

DURABLE - Crafted from cold-rolled steel with a protective black powder coating, the 9U NavePoint Performance Series network cabinet provides sturdy, reliable housing for network and server equipment. Capable of supporting up to 130 lbs, it's an ideal, durable solution for installers working on long-term projects.. VERSATILE SPACE EFFICIENT - This 9U server cabinet, suitable for 19 IT and AV equipment installations, offers flexibility for project designs. It can be free-standing or wall-mounted to optimize space, fitting neatly into project plans. With dimensions of 23.63L x 23.63W x 20H and a depth of 600mm, it offers 9U of rack space, efficiently accommodating different server and switch depths.. USER-FRIENDLY CUSTOMIZATION Features like removable, locking side panels and an L-shaped spring pin for easy door direction changes enhance the data cabinets user-friendliness. The IT cabinet arrives flat-packed, includes all necessary hardware for assembly, and supports user-friendly customization to enable installers to easily set up and customize server environments to meet specific project needs.. ENHANCED VENTILATION SECURITY Two built-in top fans and flow-through ventilation work to prevent overheating, ensuring optimal operation of your equipment. The reinforced, lockable tempered glass front door not only boosts security but also facilitates easy monitoring of installed equipment.. SAFETY COMPLIANCE - All NavePoint products are built to industry standards..

Sturdy6u server rack is construct from cold rolled steel, with a weight capacity of 110lbs50kg Electrostatic powder coat prevents rust and corrosion,quality finish. Direct useOpen and use, not having to assemble it.Network rack can be placed flat or mounted on the wall,also can be installed vertically under the table. Design Featuresmaximum mounting depth of 14 in,cables can be fixed on the side panelOpen frame server rack achieves effortless inspection, replacement and assemble. Installationwall mount network rack is easy to install,with instructions or videos for referenceEquipped with multiple accessories, suitable for different needs. ApplicationEIAECA-310-E Compliantwall mounted 4u rack fits all 19 racks and cabinets to hold various IT, network, and AV equipmentwall mount rack available in 4U, 6U, and 8U to choose.

Compact 10-Inch Width 6U Height This mini rack is designed for efficient equipment organization, featuring a space-saving 10-inch width and standard 6U height - ideal for desktops, home labs, small offices, or AV setups. Versatile Accessory Compatibility Supports 10-inch rack-mountable equipment, including patch panels, network switches, cable organizers, and power strips, providing flexible solutions for networking and electronics projects. Durable Steel Acrylic Construction Constructed from high-strength steel with premium acrylic side panels, this rack offers outstanding durability and stability - perfect for NAS, custom clusters, and sensitive electronics. Open-Frame Translucent Panel Design The open-frame structure ensures superior airflow for optimal cooling, while translucent side panels offer dust protection and allow easy monitoring of device indicatorsideal for performance and ambient lighting enhancements. Complete Accessory Kit Included Includes 1 blank panels, 1 rack shelf, 1 SBC shelf, 2 micro adapter boards, and all necessary mounting hardware - everything needed for a streamlined, customizable installation.

SPECIFICATIONS - The NavePoint 9U network rack is built from 1.5mm cold-rolled steel, finished with black powder coating for durability. Its dimensions are 18L x 20W x 19.5H, designed for standard 19 servers, AV and networking equipment, and it can carry a maximum weight of 55 lbs. The IT rack has a depth of 18 inches.. EASY EQUIPMENT ACCESS - The dual-hinged front swing gate on the 9U open frame rack opens 180 degrees, from either left or right, enabling easy access to rear panels and cables for servicing and management. The 9U server rack front gate can also be completely removed during assembly or maintenance and easily reattached.. SPACE EFFICIENT SMART DESIGN - The NavePoint 9U wall mount rack is designed to optimize space usage, making it ideal for small server rooms or data closets. Its open frame design promotes passive cooling, effectively maintaining the temperature of your networking gears and AV components to ensure optimal performance.. VERSATILE CUSTOMIZABLE - This 19 inch rack is designed with versatility in mind, providing the flexibility to meet your needs. The front gate features threaded holes on one side and universal square rack holes on the other, accommodating a wide range of rack-mounted equipment. The spring-loaded pivot pins allow for either left or right hinging.. SAFETY COMPLIANCE - All NavePoint products are built to industry standards..

DURABLE - Crafted from cold-rolled steel with a protective black powder coating, the 9U NavePoint Performance Series network cabinet provides sturdy, reliable housing for network and server equipment. Capable of supporting up to 130 lbs, it's an ideal, durable solution for installers working on long-term projects.. VERSATILE SPACE EFFICIENT - This 9U server cabinet, suitable for 19 IT and AV equipment installations, offers flexibility for project designs. It can be free-standing or wall-mounted to optimize space, fitting neatly into project plans. With dimensions of 17.72L x 23.63W x 20H and a depth of 450mm, it offers 9U of rack space, efficiently accommodating different server and switch depths.. USER-FRIENDLY CUSTOMIZATION Features like removable, locking side panels and an L-shaped spring pin for easy door direction changes enhance the data cabinets user-friendliness. The IT cabinet arrives flat-packed, includes all necessary hardware for assembly, and supports user-friendly customization to enable installers to easily set up and customize server environments to meet specific project needs.. ENHANCED VENTILATION SECURITY Two built-in top fans and flow-through ventilation work to prevent overheating, ensuring optimal operation of your equipment. The reinforced, lockable tempered glass front door not only boosts security but also facilitates easy monitoring of installed equipment.. SAFETY COMPLIANCE - The networking cabinet is compliant with CE, PCI, EIAECA-310-E, NEMA Rated Type-1, and HIPAA standards. These compliances guarantee that the cabinet adheres to the essential quality, safety, and privacy regulations. Installers can have complete peace of mind when deploying the cabinet for their projects..

Compatible with This Mini Desktop Rack is special for 10 inches width simple network, server, IT, AV, media equipment and devices at home, office or theatre studio with limited space.. Product Size W 10.7 x D 7.5 x H 16.3, 8U Space, Fitting for 10 inch networking equipments or other devices.. Easy Assembly Easy setup and only need to fix the screws at 2 sdies. The Small Open Frame Rack includes all the necessary hardware of assembly and M6 screws and cage nuts of mounting.. Heavy Duty and Durable This 8U open frame rack is made of durable metal with powder coating finish.. Easy Access The 8U small server rack allows an easy access to devices from front and back. Ideal for frequent device replacement applications or maintenance..

Durable Open frame server rack made from 2.0mm heavy duty cold rolled steelWeight capacity is up to 2000lbs Electrostatic powder coat preventing rust and corrosion. Flexible Use Adjustable depth from 23.46 to 41.49in,meeting the storage needs of equipment in different depths equipped with extra cable management hooks for cable mangement. User-friendly Design This server rack is equipped with heavy duty casters for free sliding Leveling feet are used to deal with uneven ground,enhancing the overall stability. Widely Application This server rack is versatile for 19 standard equipment and devices,including your servers,networking, AV, and rack mount components. Universal EIAECA-310-E compliant Equipped with installation kits Available in 8U, 12U, 15U, 18U, 22U, 42U.

Robust Server Rack Wall Mount Our 8U wall mount rack boasts a sturdy construction, allowing a weight capacity of up to 60lbs. This wall server rack is designed to securely support your networking equipment with ease and reliability.. Adjustable 8U Wall Mount Rack The home network rack features an expandable mounting depth ranging from 9.5 to 15.5, providing flexibility for various data rack configurations. Adaptable for diverse wall rack network applications.. Efficient Computer Equipment Rack This wall mounted network rack facilitates organized storage for your devices. The network store solution optimizes space, ensuring easy access and management of your equipment in the wall mount it rack.. Space-saving Network Rack Mount Designed for limited spaces, the deep wall mount network rack is perfect for IT environments. Its open rack structure allows for efficient cooling and maintenance of your wall mount rack network.. Versatile Network Wall Rack Ideal for both professional and personal use, this 8U wall mount rack supports diverse applications. The network rack mount offers the perfect solution for organizing your wall rack network setup..

8U WALL MOUNT ADJUSTABLE RACK 2-Post 8U wallmount rack supports 19-inch shallow server racks, shelves, patch panels, UPS, data, and networking equipment Adjustable mounting depth up to 15.6in 39.7cm deep EIA-310-compliant. READY TO USE Wall-mounted rack features fold-out sides for quick setup, ships fully assembled flat-packed, and includes wood stud screws, M5 cage nuts, and M5 screws Four keyhole mounting holes ensure easy installation and removal. ADJUSTABLE DEPTH Customize the mounting depth from 9.6 to 15.6in 24.5 to 39.7cm to accommodate different sized equipment The side panels feature handles and preset adjustment holes for easy depth customization. WEIGHT CAPACITY AND MOUNTING This wall bracket can hold up to 88lb 40kg, providing a reliable solution for equipment mounting Wall mounting holes are spaced 16 40.6cm apart enabling secure anchoring to existing construction framework. DURABLE STEEL CONSTRUCTION Built from 14-gauge 2mm solid steel with a powder-coated finish, this open-frame rack delivers exceptional strength and durability for long-term mounting Wall mount bracket is backed for life and 245 technical assistance.

Sturdy8u server rack is construct from cold rolled steel, with a weight capacity of 110lbs50kg Electrostatic powder coat prevents rust and corrosion,quality finish. Direct useOpen and use, not having to assemble it.8U Network rack can be placed flat or mounted on the wall,also can be installed vertically under the table. Design Featuresmaximum mounting depth of 14 in,cables can be fixed on the side panelOpen frame server rack achieves effortless inspection, replacement and assemble. Installationwall mount network rack is easy to install,with instructions or videos for referenceEquipped with multiple accessories, suitable for different needs. ApplicationEIAECA-310-E Compliantwall mounted 4u rack fits all 19 racks and cabinets to hold various IT, network, and AV equipmentwall mount rack available in 4U, 6U, and 8U to choose.

DeskPi RackMate T1It's made of aluminum alloy and acrylic frame mini chassis which you can setup your own cluster or home assistant server. For 10 inch 4U Server Cabinet DeskPi RackMate T0, please refer to ASIN B0DPGZPTPP. For 10 inch 12U Server Cabinet DeskPi RackMate T2, please refer to ASIN B0DT2XM22G.. 10-inch widthThe cabinet has a width of 10 inches, which is a relatively small size that saves space while accommodating sufficient equipment. With dimensions of 11x7.8x16 inches, it is suitable for small offices, home environments, and large enterprises looking to save space.. Open DesignThe cabinet adopts an open design, allowing easy access to all devices inside. This design facilitates equipment installation and maintenance, aids in device cooling, and maintains optimal working conditions.. 8U StandardThe cabinet has a height of 8U, which is a standard unit size. With 1U equaling 1.75 inches, 8U implies a height of 14 inches.. Translucent DesignBoth sides are made of translucent acrylic, providing dust resistance and reduced weight. This design allows direct observation of the cabinet's interior, and users can add ambient lights for decoration.. Easy InstallationThe DeskPi RackMate T1 arrives flat-packed, and it includes all necessary hardware for assembly..

Mini Server Rack Kit Includes Top Cover 1, Bottom Cover 1, 10 inch 1U Rack Long 1, 10 inch 1U Rack Short 1, Patch Panel 1, 10 inch 1U Blank Panel 2, Cold-rolled Steel Pillar 4, Socket Wrench 1, Screwdriver Cross 1 and Screws.. Suitable for Multiple Projects The mini rack measures 11.06 L 7.78 W 15.94 H, offering a compact footprint with ample capacity. Ideal for various networking, server, audiovideo equipment, and DIY projects, it saves valuable space on desktops, in home labs, and small offices.. Robust and Precise The mini server rack is constructed from cold-rolled steel, ensuring durability and resistance to damage. The mounting holes are precisely spaced and neatly aligned for easy installation.. Excellent Heat Dissipation Featuring an open design, the mini rack allows for easy access and visibility of internal components while ensuring efficient heat release, maintaining optimal equipment performance.. Easy Installation Comes with detailed paper installation instructions and an installation video. The package includes a Phillips screwdriver, allowing you to start installing immediately upon unboxing. Installation is effortless and stress-free..

SPECIFICATIONS - Accommodates 19-inch rack equipment with a mounting depth up to 17.5 inches, adjustable dimensions beginning at 18.25L x 20.25W x 18H, expanding to a maximum height of 42.5H, with a weight capacity of 150 lbs.. EXPANDABLE STRUCTURE - This flexible server rack adapts to your evolving needs, with settings for 8U, 12U, and 22U heights, allowing for the addition of more equipment without the need for a larger rack.. SPACE-SAVING DESIGN - Optimized for wall mounting, the rack utilizes vertical space, freeing up the floor area, and is particularly suited for compact environments.. EASY EQUIPMENT ACCESS - The rack's open frame construction promotes easy access for installation, maintenance, and cable management, while also supporting passive cooling by allowing air to circulate freely around the equipment.. ROBUST MATERIALS - Constructed from high-grade Cold Rolled Steel and finished with a durable Black Powder Coating, the rack is built to support your setup with reliability over time, coming flat-packed with all the required mounting hardware for assembly. It aligns with industry standards, including CE, DIN 41494, EIAECA-310-E, and IEC-60297-3-100..

DeskPi RackMate T1It's made of aluminum alloy and acrylic frame mini chassis which you can setup your own cluster or home assistant server. For 10 inch 4U Server Cabinet DeskPi RackMate T0, please refer to ASIN B0DPGZPTPP. For 10 inch 12U Server Cabinet DeskPi RackMate T2, please refer to ASIN B0DT2XM22G.. 10-inch widthThe cabinet has a width of 10 inches, which is a relatively small size that saves space while accommodating sufficient equipment. With dimensions of 11x7.8x16 inches, it is suitable for small offices, home environments, and large enterprises looking to save space.. Open DesignThe cabinet adopts an open design, allowing easy access to all devices inside. This design facilitates equipment installation and maintenance, aids in device cooling, and maintains optimal working conditions.. 8U StandardThe cabinet has a height of 8U, which is a standard unit size. With 1U equaling 1.75 inches, 8U implies a height of 14 inches.. Translucent DesignBoth sides are made of translucent acrylic, providing dust resistance and reduced weight. This design allows direct observation of the cabinet's interior, and users can add ambient lights for decoration.. Easy InstallationThe DeskPi RackMate T1 arrives flat-packed, and it includes all necessary hardware for assembly..

8U rack space, 11U slant mixer top with 7 preset tilt angles.. 20.2 rackable depth with lid on, 17.8 rackable depth with lid removed.. Aluminum-reinforced 12 12mm plywood and metal corners protect your gear when you're on the go.. Heavy duty twist latches and rubber-gripped handles make it easy to transport.. Strong and perfect protection for your PADJ gears.

SPECIFICATIONS This 12U server rack, made of heavy-duty cold rolled steel, is 23.7 L x 22.1 W x 28.2 H and supports a maximum of 132 lbs. It has adjustable rails for equipment depths of 2.5 to 22.6 inches.. VERSATILE Offered in 9U, 12U, 15U sizes, this server rack has swiveling casters and handles for mobility, suitable for IT, telecom, and AV setups, facilitating easy movement and adaptability.. DESIGNED FOR EFFICIENCY Features top and bottom cable management slots, an open frame with ventilation for cooling, and easy access. Marked rack-mount spaces assist in smooth equipment installation.. PORTABLE MOBILE This rack, with lockable casters, offers mobility and stability, ideal for relocating network racks, server racks, or data racks as needed.. INDUSTRY COMPLIANCE Meets DIN 41494, EIAECA-310-E, and IEC-60297-3-100 standards, making this network rack suitable for various professional IT and telecom environments..

STURDY CONSTRUCTION Rugged steel construction with 8U space, 19-inch width, assembly required. VENTED SIDE PANELS Both side panels are vented to promote maximum ventilation. EASY TRANSPORTATION With four heavy-duty casters, the rack case can be easily moved around. VERSATILE APPLICATIONS Perfect for audio and video equipment, server, network devices and venues such as studio, network center, home theater and etc..

Size 23.6W x 13.7H x 17.7D 600350450mm. 117.7'' deep 450mm. 2suitable for 8''10''12'' 203260304mm depth rack shelf. Heavy Duty MT-VIKI wall mount cabinet is made from SPCC cold-rolled steel with maximum loading capacity of 110lbs50kgs for equipments, 0.8mm thick steel, more sturdy.. Security and Protection Locking front door and side panel prevent unauthorized access to equipments.. Easy Access Quick open side panel for easy maintenance.. Package 6U rack cabinet 1, 10'' depth rack shelf1..

Compact Lightweight Design Boasts a lightweight and compact cabinet structure, ideal for desktop server deployment, centralized network equipment management and structured multi-device installation scenarios.. Standard Mounting Space Comes with a standard 10-inch width and 8U height mounting area, enabling the construction of a streamlined and space-efficient infrastructure platform.. Full Aluminum Alloy Frame Adopts a full aluminum alloy frame made of high-strength aluminum alloy, ensuring reliable structural stability and excellent deformation resistance for long-term operation.. Flexible Expansion Compatibility The 8U mounting space features flexible expandability, fully supporting the installation of 0.5U, 1U, 2U and other common specification expansion modules.. All-in-One Practicality Adaptability Integrates practicality and compatibility in one, creating a compact and highly adaptable hardware mounting base for various small-scale device deployment needs..

STURDYSAFE This desktop rack is made of high quality cold rolled steel, support up to 143lbs 65kg weight capacity. CONVENIENT DESIGN With 360-degree open frame structure, its easy to access sever equipment while occupying limited space.Units U heights marked clearly for added ease. VERSATILE This series small desktop rack is ideal for simple network, server, media, IT, AV, equipment and devices in home office or theatre studio. EASY ASSEMBLY Quick and easy setup on desk, table or floor equiped with cage nuts and screws for mounting. Compliant with EIAECA-310-E standards,available in various of U heights,this rack is designed for efficiency and convenience.

TRUE 19 RACK COMPATIBILITY Built for standard 19-inch rack-mount studio gear with threaded rails no cage nuts. 453mm clear opening between rails helps gear slide in more easily and reduces forcingscratching.. DESKTOP-FRIENDLY DEPTH 14.7 in 373mm usable rack depth for most studio setups. Please measure your gear depth and allow room for rear plugs and cable bend.. MADE FOR STUDIO GEAR Organize preamps, audio interfaces, compressors, EQs, FX units, patchbays, headphone amps, power units, rack drawers and morekeep your most-used gear within arms reach.. CLEAN LOOK, SOLID BUILD Furniture-grade wood panels with a smooth finish in Natural or Walnut. Rigid frame stays stable on desks, shelves, and studio workstations.. EASY DIY ASSEMBLY HARDWARE INCLUDED Pre-drilled panels and clear instructions for quick setup. Mounting hardware is included for best fit, please use the included rack screws..

INDUSTRY-LEADING 400LB CAPACITY Floor-standing design supports up to 400 pounds of professional networking equipment vs competitors' 150-200lb limits wall-mountable for lighter loads up to 150lbs with included heavy-duty mounting hardware. MAXIMUM EQUIPMENT COMPATIBILITY 17.5 tall x 20.24 deep frame accommodates all 19 rack-mount servers, network switches, audiovideo equipment, routers, and UPS systems from Dell, HP, IBM, Cisco, and other enterprise brands. QUICK 20-MINUTE ASSEMBLY Smart open-frame design eliminates complex installation includes all mounting screws, wall brackets, and adjustable vented shelves that can be repositioned up, down, or facing different directions for custom configurations. SUPERIOR COOLING PERFORMANCE Two included 1U vented shelves plus open-frame construction maximize airflow circulation around equipment, preventing overheating and extending hardware lifespan compared to enclosed cabinets. DUAL INSTALLATION OPTIONS Versatile design works as floor-standing rack for server rooms or wall-mounted solution for space-constrained offices stackable design allows combining multiple units for larger installations.

ADJUSTABLE DEPTH 4-Post 8U open frame server rack with 4 vertical rails and adjustable mounting depth 22 to 40 56cm to 101cm Compatible with various servers switches data AV and other IT equipment EIAECA-310-E Compliant. EASY ASSEMBLY Mobile network rack with easy-to-follow assembly instructions and online video Compact flat-pack shipping to avoid damage and facilitate installation Only 18in 46cm high, ideal for utilityserver closets or narrow homeoffice spaces. COLD ROLLED STEEL Durable 4 Post 19 small open frame rack designed for ventilation with 8U mounting height and 1200lb 544kg weight capacity stationary 3 install options included casters, levelling feet, or base-plate to secure rack to the floor. HARDWARE INCLUDED Rolling computerdata rack includes cage nuts and screws to mount equipment, easy to read Units U and depth adjustment markings, cable management hooks for organization, and required assembly tools. THE IT PRO'S CHOICE Designed and built for IT Professionals, this 8U rack is backed for 2-years, including free lifetime 245 multi-lingual technical assistance.

DeskPi RackMate T1 Plus It's made of aluminum alloy and acrylic frame mini chassis which you can setup your own cluster or home assistant server.. 10-inch width The cabinet has a width of 10 inches, which is a relatively small size that saves space while accommodating sufficient equipment. With dimensions of 11.06x10.23x16.45 inches 28.1x26x41.8 cm, it is suitable for small offices, home environments, and large enterprises looking to save space, The T1 Plus is particularly well-suited for NAS devices with a depth of 260mm.. 8U Standard The cabinet has a height of 8U, which is a standard unit size. With 1U equaling 1.75 inches 4.4 cm, 8U implies a height of 14 inches 35.2 cm. Open Design The cabinet adopts an open design, allowing easy access to all devices inside. This design facilitates equipment installation and maintenance, aids in device cooling, and maintains optimal working conditions. Stylish Translucent Panels Both sides are made of translucent acrylic, providing dust resistance and reduced weight. This design allows direct observation of the cabinet's interior, and users can add ambient lights for decoration. Enhanced Cooling Equipped with perforated side panels, the DeskPi RackMate T1 Plus promotes superior airflow, helping to keep your servers cool and operating at peak performance. Easy installation The DeskPi RackMate T1 Plus arrives flat-packed, and it includes all necessary hardware for assembly.

VERSATILE Made from heavy gauge steel, these Vertical Rack Rails were designed to mount your networking or telecom equipment such as patch panels and PDUs.. CONVENIENT The simple yet elegant design features multiple sized mounting holes across the entire length allowing for installation in virtually any circumstance.. COMPATIBLE Silk screened Rack Unit measurements and pre-tapped with 12-24 threading, these rails are compatible with virtually any rack mountable equipment.. PACKAGE INCLUDES Enough 12-24 screw sets to mount equipment in every rack space..

STURDY SAFER By adding one additional horizontal beam on posts, this desk top rack series enhances stability torsional resistance of the structure, meanwhile offers a safer top space for human pets.. SPACE SAVING Compact size allows the mini rack to rest on desktop or floor in the corner. With 360-degree open frame structure, its easy to access your equipment while occupying limited space.. VERSATILE This desktop 8u 19 inch rack is ideal for simple network, server, media, IT, AV, music recording, home theatre recording studio homelab office to mount 19 standard equipment and devices. SOLID MATERIAL Features 2.0 mm cold-rolled steel that are well made and great powder coat finish which can prevent scratching the equipment. Clear U marking helps calculate the space and install the devices quickly and easily.. EASY INSTALLATION This free-standing stereo rack is easy to install with included assembly screws cage nuts, by following the guide menu..

8U WALL MOUNT RACK This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in 35 cm, recommended for networking equipment up to 12in deep, leaving 2in for cable routing maximum weight capacity of 80lbs 36kg. EASY TO INSTALL The 8U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware. COLD-ROLLED STEEL CONSTRUCTION The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution includes wall mounting hardware Installs onto 16 studs with mounting holes. EASY CABLE MANAGEMENT Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.

High Density ABS Aluminum Construction. Heavy Duty Handles for Easy and Secure Grasp. Industrial quality butterfly clips. Integral Front Rear Industry Standard 19 Rails. Gasket sealed lids for maximum protection against outside contaminants. Heavy Duty Handles for Easy and Secure Grasp.

Space Saving Maximum depth 15.5. Use the wall mount network cabinet to maximize available space for retail locations, classrooms, back offices, network cabinets, and other locations where space is limited.. Fast Heat Dissipation The server cabinet is designed with vents to optimize airflow and avoid critical IT equipment overheating. Heat sink holes in the top, bottom, and rear panels are more conducive to heat dissipation.. Sturdy Construction Robust welded frame construction for durability and long service life. With 100 lbs wall-mounted load capacity and 200 lbs ground-mounted load capacity, you can place multiple devices in the server rack cabinet as needed.. High Security The locked glass door ensures the security of data and equipment. Wall mount rack enclosure server cabinet is ideal for use in public places such as offices, effectively protecting the security of your devices.. Hassle-free Installation Fully adjustable square-hole mounting rails of the wall mount server cabinet facilitate device installation. Wiring holes on the top, bottom, and rear panels provide you with easy cable routing..

Configures to 8U, 12U or 22U of rack space. Stores 19 in. Rack equipment up to 18 in. Deep. Maximum load capacity of 150 lb.. Allows easy access to equipment and cabling. Simple to assemble and mount. 5-Year Limited warranty.

8U RACK CASE WITH WHEELS Designed for live sound, studio, and IT applications, this 8U rack case provides a secure and mobile solution for mounting professional gear.. REVERSIBLE RACK RAILS Includes M5 circle holes for quick screw-in mounting and square holes for use with included cage nuts, offering versatile and secure installation options.. DUAL FRONT REAR MOUNTING Features rack rails on both sides, allowing for rear power strip mounting while securing deep rack-mounted equipment such as servers in the front.. CABLE MANAGEMENT HIGH LOAD CAPACITY Built-in cable management ports at the bottom help keep your setup organized, while the steel construction supports up to 440 lbs 199.6 kg.. 3 LOCKING CASTER WHEELS Equipped with durable 3-inch wheels for smooth transport and locking stability, making it ideal for studio setups, live sound gear, and IT environments..

8U RACK SPACES Provides 8 rack mount spaces for patch panels, switches, shelves, and other standard 19 equipment. HEAVY-DUTY CRS CONSTRUCTION Cold-rolled steel frame with reinforced 14-gauge arms and 11-gauge rails for long-term durability. 18-INCH DEPTH FOR VERSATILITY Supports full-size network gear including patch panels, switches, PDUs, and cable organizers. WALL-MOUNTED OPEN FRAME Ideal for network closets and IT rooms where floor space is limited improves airflow and accessibility. PRE-TAPPED RAILS EASY SETUP Rails are threaded for 12-24 screws racks ship flat with assembly instructions included.

Heavy-Duty Rack Case Made from Indestructible Roto Molded Polyethylene Plastic Updated 2018 Design. 19 Rackable Depth 8U Rack Size 14. Penn-Elcom MOL Recessed Twist Latches with Black Powder Coated Finish. Front and Rear Removable Lids with Molded-in, Ergonomic Side Carry Handles. Made in the USA from Recycled Plastic.

Lightweight ABS Construction with Retractable Tow Handle, Wheels, and Heavy Duty Twist Latches. Standard 19, threaded and field replaceable 7mm zinc-plated steel rack rails. Removable Front and Rear cover for access to Front Rear rack rails. One pack of 48 Gator Rack Screws included. 19.25 Rack Depth 2U Rack Size 14.

SIZE Width 15.75 400 mm, Depth 19.49 95 mm, Height 20.55 522 mm. Additional heights of 6U and 12U are also available. The portable rolling network rack series is designed for versatility.. STURDY Featuring a robust 4-post construction, this 9U rack is manufactured using stringent sheet metal processes and high-quality spray treatments, making it resistant to scratches and rust.. VERSATILE This exceptional rack series is perfect for housing various electronics and equipment such as AV systems, TVs, NAS devices, data servers, internet routers, amplifiers, hard recorders, computers, and gaming consoles like the Xbox.. INSTALLATION Assembly is straightforward with clear instructions provided. The universal wheels equipped with brakes offer enhanced stability to ensure an uninterrupted online gaming experience and enjoyable entertainment moments.. ACCESSORIES The product will be delivered in a single box containing the 6U network rack along with essential accessories including screws cage nuts and casters..

19 Studio rack cabinet 8U Rack Size 14. 16.3mm thick MDF furniture grade black oak laminate, easily constructed. Rack rails constructed of 3.2mm heavy duty cold rolled steel. Tapped Rails - No need for Cage Nuts. 15.25 Rackable Depth.

Lightweight ABS Construction with Heavy Duty Twist Latches. Standard 19, threaded and field replaceable 7mm zinc-plated steel rack rails. Removable Front and Rear cover for access to Front Rear rack rails. One pack of 48 Gator Rack Screws included. 19.25 Rack Depth 2U Rack Size 14.

Maximize Equipment Protection Crafted from Linear Low Density Polyethylene LLDPE for unparalleled strength and impact resistance, keeping your gear safe in any environment. Versatile Stackable Design Available in multiple sizes 2U-12U with interlocking bars, easily stack and secure your equipment for efficient transport and space-saving storage. Waterproof Secure Gasket-sealed lids and recessed twist latches offer double protection against moisture and dust, ensuring your equipment remains dry and intact. Convenient Reliable Features include front and rear steel threaded rails, rack screws 10-32 thread, flush carry handles, and non-slip rubber feet for stability. Trusted by Professionals SKB's Roto Racks are the go-to choice for musicians, DJs, and audiovisual professionals seeking reliable, secure transport and storage for their valuable equipment.

ADJUSTABLE DEPTH This 2-post 12U 19 inch open frame network rack is EIAECA-310 compliant and has an adjustable depth 12-20in 30.5-50.8cm Data rack is ideal for AV Audio IT computer equipment, servers, switches, patch panels, and PDUs. HEAVY DUTY Durable rack features a vertical rail made of SPCC cold-rolled steel and a weight capacity of up to 200lbs90kg Its design supports unobstructed airflow to help keep your equipment cool and easy to install with access to all sides. EFFICIENT FLAT PACK SHIPPING The IT rack ships flat packed with ISTA-6 certified packaging assembly required to ensure hassle-free installations with complete undamaged delivery Comprehensive assembly instructions included. HARDWARE INCLUDED The open post wall mount server rack includes a complete set of M6 square cage nuts, M6 screws and plastic washers to securely mount all of your equipment in the rack. THE IT PRO'S CHOICE Designed and built for IT Professionals, this 12U wall mounted network rack is backed for 5-years, including free lifetime 245 multi-lingual technical assistance.

Maximum load capacity of 68 kg. Secures 19 inch rack equipment up to 23.5 inch deep. Configures to 8U, 12U or 22U of rack space. Heavy-duty steel construction designed to last. Easy to assemble with included hardware.

STURDY CONVENIENT 8U 19 Open Frame wall mount network rack with 12 mounting depth is EIAECA-310 compatible supports like patch panels, shelves and unmanaged switches. HEAVY DUTY This heavy duty 2 post open frame rack supports unobstructed airflow is easy to install with a durable design made from SPCC cold-rolled steel with support for up to 135lbs of equipment. EASY ASSEMBLY The rack ships flat packed with ISTA-6 certified packaging to ensure complete and undamaged delivery and also features comprehensive assembly instructions. ACCESSORIES INCLUDED The wall mount server room computercommunicationAVIT equipment rack includes a complete set of screws and cage nuts to securely mount all of your equipment in the rack.

ADJUSTABLE DEPTH 2-Post 8U wall-mount server rack features an adjustable depth of 12 to 18 30,0cm to 45,7cm as well as a dual-position 12 shelf that can be installed at the top or the bottom of the rack. HASSLE-FREE INSTALLATION the wall mount network rack features 10-32 tapped rails for hassle-free IT equipment installation Directly mount your equipment to the rail without using any cage nuts. STURDY AND SAFE the open post wall rack is constructed of solid steel to ensure a sturdy and safe mounting solution for your equipment Wall mounting holes positioned 16 40cm apart to match standard NA drywall framework EIAECA-310-E Compliant. PERFECT FOR SMALL SPACES The wall mounting feature allows you to free up desk or floor space, making the data rack ideal for your small home office SoHo environment, or any other location with limited space available. THE IT PRO'S CHOICE Designed and built for IT Professionals, this TAA compliant wall mount bracket is backed for life, including free lifetime 245 multi-lingual technical assistance.

8U Rack Space Threaded Rails Offers 8 rack units with 11.75 rail-to-rail depth includes front and rear steel-threaded rails 10-32 and rackmount screws for secure installation. Rugged Waterproof Protection Molded from tough Linear Low-Density Polyethylene LLDPE with gasket-sealed front and rear lids for maximum strength, impact resistance, and water resistance. Easy Transport Features a single-touch pull handle and integrated back lid wheels to reduce lifting and simplify mobility. Stackable Design Interlocking molded stacking bars and SKB's bar design allow secure stacking with other SKB Roto and Shallow Racks. Road-Ready Hardware Includes recessed Mil-Spec twist latches, flush-mount carry handles, and non-slip rubber feet for stability and durability.

8U Rack Space Threaded Rails Offers 8 rack units with 17.6 rail-to-rail depth includes front and rear steel-threaded rails 10-32 and rackmount screws for secure installation. Rugged Waterproof Protection Molded from tough Linear Low-Density Polyethylene LLDPE with gasket-sealed front and rear lids for maximum strength, impact resistance, and water resistance. Easy Transport Features a one-touch pull handle and integrated back lid wheels to reduce lifting and simplify mobility. Stackable Design Interlocking molded stacking bars and SKB's bar design allow secure stacking with other SKB Roto and Shallow Racks. Road-Ready Hardware Includes recessed Mil-Spec twist latches, flush-mount carry handles, and non-slip rubber feet for stability and durability.

GearIT 12U Equipment Rack With Flat Top - This combination rack and workstation fits up to 12 units of 19 studio gear and networking hardware, plus extra desktop space on the oak-colored top for holding mixers, laptops and other AV necessities. Perfect for adding capacity to home setups and professional studios.. Double-Duty as Studio Furniture - Space is at a premium in any recording or production studio. To help you use your workspace effectively with room to breathe, this all-in-one compact workstation includes both the 12U equipment rack and a spacious desktop that fits mixers, laptops, notebooks, drum machines and more.. 12U Rack for Audio, Video and Networking - Level up to pro-grade production gear or expand your ever-growing collection with this steel rack cabinet. Supports up to 12 units of 19-inch equipment, the standard size for professional audio and networking gear including compressors, preamps, FX units, converters, servers and more.. Steel Construction for Your Valuable Gear - The best studio hardware is made to last a lifetime when you take care of it, so place your gear in a purpose-made studio rack, built with black-finished steel, heavy-duty joints and a design that fits well into any studio.. EVA Anti-Vibration Pads Included - In the box are optional EVA pads that attach to the bottom of your workstation rack, to keep the feet from sliding on wood floors while also absorbing vibrations and cushioning delicate items like opto compressors and tube electronics..

This package includes 2 pcs of 8U rack rails, 40 pcs of M6 x 20mm rack mount screws, 40 pcs of M6 cage nuts, and 20 pcs of self-tapping installation screws, providing everything you need for a straightforward mounting solution.. Universal Compatibility Designed for 19 inch rack mount equipment, these rack rails are ideal for installing servers, network switches, and audio studio rack devices.. Durable Construction Made from heavy-duty cold rolled steel with a black electro-static powder coated finish, these rack rails offer enhanced durability and a professional look that will last for years.. Easy Setup Enjoy a straightforward installation process with the included M6 rack mount screws, ensuring you can quickly and efficiently set up your server and studio racks.. Secure Assembly Our M6 rack screws and cage nuts provide a tight and secure fit, ensuring your equipment is safely mounted and stable, perfect for all your studio and server rack projects..

Dimensions 19.88W x 13H Adjustable Depth from 13inch-18inch Fitting deep equipments, the wall mounting holes on the back are spaced 15.94 inches center to center.. EIAECA-310 compatible Supports standard 19 rack equipment like switches, patch panels, shelves and others.. Contents 1 pc of 6U open frame rack , 24 sets of M6 screws and cage nuts, screws for assembly and mounting.. Max. Weight Capacity Made of high quality cold rolled steel with powder coating finish. This Sturdy wall mount rack can hold up to 110 pounds.. Access and Cooling Open frame design makes the setup, cable management and maintance more accessible , and keeps optimal airflow..

2-Post 8U Desktop Server Rack W 19.8 x D 11.6 x H 8U 16.3 including the non slip feet, Compatible with 19 rackmount networking, Media, AV, IT,Studio equipments or components.. Sturdy Construction this 8U Tabletop Rack is made of high quality cold rolled steel with powder coated finishing. The rivets at the hinges are made of steel. The desktop rack is more sturdy once you secure your first unit. Max loading weight capacity 50 pounds.. Easy to Assemble After unfolding this free standing tabletop rack, you only need to assemble the 2 posts onto the base with the included screws. Including 32 sets of M6 screws and cage nuts for mounting Posts with square holes.. Non Slip Feet The non slip feet at the base make this 8U desktop rack standing steadily and protects your table from scratching.. Adjustable Angle 2 Posts When Installing, the angle of the 2 Posts are adjustable between 9 and 24 degrees for meeting your different requirements.. Saving Space this open frame rack can organize rackmountable equipments in a limited space at home, offices or theater studios. Keep things more tidy and easy access..

STURDY SAFER By adding one additional horizontal beam on posts, this desktop rack series enhances stability torsional resistance of the structure, meanwhile offers a safer top space for human pets. SPACE SAVING Compact size allows the mini 8u tabletop rack to rest on the top of desk, or floor in the corner. With 360-degree open frame structure, its easy to access your equipment while occupying limited space for work stuio homeLab and commercial scenarios. INSTALLATION TIPS This free-standing 8u stereo rack with tappered holes on 2 posts is easy to install by following the guide menu. Comes with screws Rubber feet. VERSATILE This 8u audio rack is ideal for media, IT, AV, home theatre studio and other 19 standard network equipment and devices. SOLID MATERIAL Features 2.0 mm cold-rolled steel that are well made and great powder coat finish which can prevent scratching the equipment. Clear U marking helps calculate the space and install the devices quickly and easily.

DIMENSION 22.4W x 19.8D x 21.8H, 570 mm x 505 mm x 555 mm with leveling feet or wheels. Meanwhile 12u rack, 15u rack, 18u rack 22u racks are available. OBTUSE ANGEL PANELS Both side panels with ergonomic safety design, minimizes the impact or cutting risks. With build in handles on each side panel of the open cabinet. Bottom area is vented to keep the air cool. OPTIONAL RAIL HOLES ADJUSTABLE DEPTH This free-standing cabinet has front and rear rails. The unique design is with both tapered square holes on each rail round holes are compatible with US 5 mm and European 6 mm standardswhile square holes fit M6 M5 screws cage nuts. We can also by moving rails forward or backward to fit devices depth. NEAT CABLE MANAGEMENT There are 4 gaskets diameter 50 mm on the top panel 3 in the bottom of the studio rack, to organize the cable in and out. Reveal them when needed. This open front and rear cabinets with casters are widely used in studio, home theater, office, for mounting electronics equipment like AMP, AV, HIFI, NAS, Server, DATA, internet router, amplifier, hard recorder, computer, X-box. Telecom musical instrument. HEVY DUTY If you are a DJ or musician, need to move the rack from time to time, we recommend installing wheels. And for heavier equipment, using leveling feet are of better structural safety solution. This series support up to 600 lbs. with leveling feet, 500 lbs. with casters. EASY TO INSTALL Comes with 1pcs 9u rack, relevant mounting screws, casters, leveling feet and a detailed assembling instruction. It's easy to install and you will get an ideal functional rack within a few moments. FYI, if you need some other RIVECO rack accessories, compatible screws, rack shelves, drawers, cable managements, or blank panels, they are all available on Amazon. VERSATILE widely used in home lab, recording studio, home theater office scenarios.

SIZE Width 19.7 500 mm, Depth 21.7 550 mm, Height 22.7575 mm with casters. Also other heights 6U, 12U, 15U, 18U ,22U, 25U are available. RIVECO portable rolling network rack series is versatile for 19 standard equipment and devices. STURDY 4-post construction, heavy-duty, SPCC cold-rolled steel can safely support up to 800 lbs of rack mounting equipment with leveling feet, and 500 lbs with casters. The black RAL9005 powder coat finish makes this 9u rack resistant to scratching and rusting. VERSATILE This great rack series is ideal for electronics equipment like AV, TV, NAS, DATA, server, internet router, amplifier, hard recorder, computer, X-box. INSTALLATION Easy assembly according to instruction. Floor standing and movable with brake casters or leveling feet. The base is also pre-drilled for securely fastening the small home server rack to the ground if needed, providing you with additional stability to ensure your networking game and entertainment moments. ACCESSORIES The product ships to customer is in one box including the 9U network rack, and accessories of m6 screws cage nuts, casters, leveling feet.

SIZE Width 19.7, Depth 17.7, with Height 19.8 9U, also other option 4U, 6U, 12U, 15U, 18U wall mounted racks are available.. MATERIAL Heavy-duty, SPCC cold-rolled steel open frame construction can safely support up to 180 lbs. 80 kgrack mount equipment. The black RAL9005 powder coat finish makes this 2 posts 9U rack resistant to scratching and rusting, Matte black is usually a safe choice for recording studio, gaming room, Hifi room, home theater, conference room, garage room, study room, weak current room communication room.. STURDY With 80 kg load capacity, this small versatile wall rack series is ideal for electronics equipment gear like AV, TV, NAS, DATA, server, internet router, amplifier, hard recorder, computer, and video game console like PS5 X-box.. INSTALLATION Easy assembly according instruction. Come in one box with safely packed rack parts and relevant accessories of M6 screws cage nuts and bolts.. APPLICATIONS This RIVECO networking rack series is compatible with EIA-standard. Side cage nuts holes installation distance is 470mm, ideal for installing patch panels and other network equipment in secure with M6 screws. Make sure your devices are no longer than 17.5..

COMPACT AND EFFICIENT The Sound Town SDRK-8SLB 8U studio rack accommodates 19 width and 14 depth, designed to maximize your studio space. SUPERIOR DURABILITY Crafted with 15mm thick plywood and finished in a weathered brown color, this studio rack promises exceptional durability and protection for your valuable gear. QUICK AND EASY ASSEMBLY Designed for simplicity, the SDRK-8SLB studio rack comes with pre-cut components, ensuring an easy DIY assembly experience. Some assembly required. HASSLE-FREE SETUP Equipped with pre-installed rack rails and 1032 rack rail screws, setting up your studio equipment has never been more quick and convenient. ERGONOMIC AND ACCESSIBLE With its innovative 20-degree slanted turret design, the SDRK-8SLB rack offers unparalleled ease of equipment operation. Dual rear cable passthrough cutouts enhance organization and cable management.

4-POST 8U HINGED WALL-MOUNT RACK IT Server Rack with 19.8in 50.2cm maximum mounting depth is ideal for installing network switches out of the way for example high up on a wall in your warehouse, office, server room or store location. OPTIMIZED DESIGN The Wall Mount Data Rack features a hinged open frame rack design that allows the entire frame to swing open for easy installation and maintenance Unobstructed airflow helps to keep your Data AV IT equipment cool. BUILT TO LAST The 8U wall mount computer equipment rack offers a 4 post design for additional support of your equipment Constructed of high-quality SPCC cold-rolled steel for strength and durability with a maximum weight capacity of 139lbs 63kg. FULLY ASSEMBLED The hinged server rack ships fully assembled with all of the rack screws and cage nuts required to mount your equipment Hinged Data Rack is TAA and EIAECA-310-E Compliant. THE IT PRO'S CHOICE Designed and built for IT Professionals, this 8U wall mounted network rack is backed for life, including free lifetime 245 multi-lingual technical assistance.

Brand StarTech, Model RK812WALLOA. Product Type Rack Frame, ApplicationUsage LAN Switch, ApplicationUsage Patch Panel, Form Factor Wall Mountable, Color Black, Material Steel Frame. Maximum Weight Capacity 176.37 lb, Height 19.5, Width 21.1, Depth 13.2, Rack Height 8U, Weight Approximate 23.85 lb. Package Contents 8U Open Frame Wall Mount Equipment Rack - Adjustable Depth, 16 x Assembly Screws, 32 x M5 Screws, 32 x M5 Cage Nuts, 8 x Truss Head Screws, 1 x Installation Guide. Environmentally Friendly Yes, Environmental Certification RoHS, TAA Compliant Yes.

Powerful Load-bearing12U Network Rack Open Frame is constructed from durable cold rolled steel Rack shelf supports enhance stability, wall-mounted capacity of 130lbs, the ground-mounted up to 260lbs. Considerate DesignsOpen-frame layout, including a top panel adding space, anti-slip shelf stops fixing devices and compatible racks for stack and expansion to meet requirements of home server rack. Complete AccessoriesA 12U open frame server rack, two ventilated shelves, four shelf stops, four velcro straps and a set of equipment mounting screws. Versatile ApplicationIdeal for space-efficient multi-device setups in warehouses, retail, classrooms, offices and more Excellent choices as AV RackIT Rack. Effortless Setup Network Rack includes hardware, a comprehensive manual, mounting hole drilling template and an online assembly video to simplify setup.

Save valuable floor space 6U wall mount server cabinet Dimensions 13.78 H x21.65 W x17.72 D.Maximum mounting depth is 14.2. Keep critical network equipment secure glass door and side panels are lockable to prevent unauthorized access. Front door can be installed on either side of the front of the cabinet to satisfy your door swing orientation preference. Easy equipment configuration Fully adjustable mounting rails and numbered U positions, with square holes for easy equipment mounting with top and bottom punch-out panels for easy cable access. Durability Made of high quality cold rolled steel holds up to 110lb 50kg Easy Assembly Required. PCI HIPPA and EIAECA-310-E compliant.

8U Universal 19-inch Equipment Rack Cabinet Case with Locking Wheels for AV, Networking, Computer Server, Home Theater Rackmount Gear. Compatible with American 5mm and European 6mm rackmount standards. 5mm and 6mm Screws Packs are included.. Front and rear rails. Open back for easy wiringpatching access.. Easy Assembly Required. This Equipment Rack is Ideal for storing and organizing ServerNetworking Equipment, Power Amplifiers, Microphones, DVD Players, DJ Signal Processers, etc. AxcessAbles RK8U is compatible with all AxcessAbles drawers, trays and panels..

Elegantly Displays Pro Audio Equipment in Home Recording Studio Control Room. 8U Spacing Provides Room for Preamps, Audio Interface, Effects Processors, or Similar Gear. Protective Feet on Base. Rackable Depth Front Rail to Rear Lip 12.75323mm. Product Dimensions Exterior 21533mm L x 14356mm W x 17432mm H, Net Weight 22 lbs.10 kg.

OPEN FRAME DESIGN 2-Post open frame design provides maximum airflow and allows you to easily adjust cabling and access equipment from all sides. STURDY CONSTRUCTION Rugged SPCC cold-rolled steel construction with 8U space, supports stationary loads up to 200 lbs. ULTIMATE VERSATILITY 19 width, 16 depth, with easy-to-read marking for rack units. Compatible with a variety of 19 rack mountable servers and network devices. EASY TO SET UP Easy to assemble with all required hardware, tools and instructions included. The server rack also comes with screws for wall mounting. VERSATILE APPLICATIONS Perfect for IT equipment, servers, network devices, audio video equipment, patch panels and etc..

8 space studio rack desk with 19 width, assembly required Slant design for easy equipment operation. Slide-out 2U drawer at the bottom provides storage space for microphones, mixers, drum machines, cables and more. Pre-cut and easily assembled for do-it-yourselfers 1032 rack rails installed rack rail screws included. Made from top-quality plywood with a beautiful weathered gray finish. Four rubberized casters included, two of which come with lever brakes rubber feet on bottom for nonslip stability keep it from slipping.