Size The thread size of 8AN and AN8 ORB is 34-16 UNF.. Seal The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring.. Material Made of aluminum alloy 6061-T6 body and NBR rubber O-ring.. Parameter Working pressure 1500PSI. Working temperature-65F-252F. O-ring temperature range -4F-392F.. Application Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, etc..

Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications.. The AN8 nylon and stainless steel braided PTFE fuel injection line kit includes 6pcs 8AN PTFE hose end fittings 2pcs straight, 2pcs 45 degree, 2pcs 90 degree and AN8 PTFE braided fuel line Length 10feet. Braided Fuel Hose Inner Diameter 1332. Outside Diameter 0.543inch. Please measure before purchase. Working temperature range -76 to 446 -60 to 230. Maximum Working Pressure psi 2500 psi. Bursting Pressure psi 8000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances.. PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

8AN braided fuel hose kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel line kit can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Package includes 10pcs 8an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 8an hose separator clamp and 8an braided fuel line Length 20 Feet. Hose ID 716. Hose OD 0.642inch.. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

8an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 10pcs 8an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 6pcs 8an hose separator clamp,2pcs 8an to 8an Fitting and 8an braided fuel line Length 20 Feet. Hose ID 0.41. Hose OD 0.64inch.. 8an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Size PTFE 6an fuel line ID 516 0.31 inch. OD 0.45 inch. Length 20 ft6 m. Please measure before purchase Includes as shown in the picture. Parameter PTFE fuel line hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium EVIL fuel line kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

The Size of 8AN Fuel Line Kit PTFE If you are installing this product for the first time, it is highly recommended to have it installed by a professional. Hose ID 1332. OD 0.543inch. Please confirm the size before purchasing. Working Parameter of 8AN PTFE fuel line Maximum Working Pressure psi 2500 psi. Bursting Pressurepsi 8000psi. Working Temperature Range -76 to 446-60 to 230PTFE. Including 8AN PTFE hose ends4 x Straight, 2 x 45 Degree, 2 x 90 Degree2 x 180 Degree, 2 x 6AN hose separator clamp1 x gloves, 1 x wrench and 6AN PTFE Black Nylon Braided fuel line Length 20 Feet. Application PTFE E85 Nylon Braided 8AN Fuel Line Mostly worked with transmission fluid, coolant, oil, pump gas, diesel, and fuel. Warranty SINTLY offers a 3-month warranty for the 8AN fuel line kits. Please feel free to contact us via Amazon message.

Suitable for Widely Usage The PTFE nylon braided fuel line kit is mostly used in EFI LS systems. It can bu used as a fuel injection hose, LS engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carburetor fuel line, fuel return line, vapor return line, vacuum line, fuel supply line, turbocharger fuel line, and for other high-temperature and high-pressure applications.. Size The 6AN fuel line kit ID 516 0.31. OD 0.45. Please measure before purchase. Includes all components shown in the picture.. Working Pressure Working temperature range -76 to 446 -60 to 230. The maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI. The AN-6 nylon braided high-pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances.. Applicable Medium The PTFE fuel hose kit is compatible with all automotive fuels, lubricants, and coolants.. Notice The PTFE LS Swap EFI hose is relatively rigid and should not be bent or folded in half. Professional installation is highly recommended..

Antistatic Protection Features a conductive graphene inner layer, PTFE fuel line kit can dissipate static electricity and reduce the risk of sparking, ensuring the reliable fuel transfer. Resistant to high temperature and corrosion, the kit is suitable for use in harsh environments.. Size and Installation 8AN PTFE fuel hose ID 0.39 inch9.9mm OD 0.55 inch13.9mm Length 10 Feet. Installation instructions are included. Please measure before purchase. Temperature and Pressure Range 8AN fuel line working temperature range -76 to 446 -60 to 230. Max working pressure 1500 psi. Bursting pressure 4500 psi.Minimum bend radius101.6mm4inch.. Universal Compatibility Conductive PTFE hose fits with diesel, biodiesel, gasoline, E85, methanol, water, air, and transmission fluids. For hazardous environments, we recommend using conductive PTFE fuel lines for fuel supply systems, such as fuel injection systems, turbochargers, carburetors, LS engines, and fuel return systems.. Kindly Note The 8AN braided PTFE line kit can't be bent or folded in half. The EVIL ENERGY PTFE fittings and professional installation are recommended for optimal performance..

The size of 8AN fuel line kit If you are installing this product for the first time, it is highly recommended to have it installed by a professional. Hose ID 716. Hose OD 0.64inch. Please confirm the size before purchasing. Working Parameter of 8AN fuel line Maximum Working Pressure psi 500 psi. Bursting Pressurepsi 2000psi. Working Temperature Range -40 to 257-40 to 125. Including 8AN swivel hose ends4 x Straight, 2 x 45 Degree, 2 x 90 Degree2 x 180 Degree,1 x gloves, 1 x wrench, 2 x 8AN hose separator clamp and 8AN Black Nylon Braided fuel line Length 20 Feet. Application Nylon Braided CPE 8AN Fuel Line Mostly worked with transmission fluid, coolant, oil, pump gas, diesel, and fuel. Warranty SINTLY offers a 3-month warranty for the 8AN fuel line kits. Please feel free to contact us via Amazon message.

Size ID 0.39 inch. OD 0.55 inch. Length 16ft. Minimum bend radius 4 101.6 mm. Please measure before purchase Includes as shown in the picture. Parameter The hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE fuel line is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size ID 0.39 inch. OD 0.55 inch. Length 20ft. Minimum bend radius 4 101.6 mm. Please measure before purchase Includes as shown in the picture. Parameter The hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size 8an fuel hose ID 0.39 inch. OD 0.55 inch. Length 10ft. Minimum bend radius 4 101.6 mm. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size ID 0.39 inch. OD 0.55 inch. Length 10ft. Minimum bend radius 4 101.6 mm. Please measure before purchase Includes as shown in the picture. Parameter The hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Notice The PTFE fuel line is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

size This fitting is 8AN to 38 barb.The thread specification for the 8AN push-lock hose fitting is 916-18 UNF. Parameter Maximum working pressure1,500 PSI.Working temperature range -40F to 248F. Material Made of aluminum alloy 6061-T6 , anodized black surface. FeatureThe barb fitting works only with rubber fuel lines.. ApplicationPush-lock hose fittings are widely used in fuel systems, oil coolers, and as transition fittings for fuel, oil, or coolant lines..

Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications.. The AN8 nylon and stainless steel braided PTFE fuel injection line kit includes 10pcs 8AN PTFE hose end fittings 4pcs straight, 2pcs 45 degree, 2pcs 90 degree, 2pcs 180 degree and AN8 PTFE braided fuel line Length 16feet. Braided Fuel Hose Inner Diameter 1332. Outside Diameter 0.543inch. Please measure before purchase. Working temperature range -76 to 446 -60 to 230. Maximum Working Pressure psi 2500 psi. Bursting Pressure psi 8000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances.. PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Size 6AN fuel hose ID0.31inch. OD 0.45inch. Minimum Bend Radius 3.5 88.9mm. 8AN fuel hose ID 0.39inch. OD 0.55inch. Minimum Bend Radius 4 101.6mm. Length 20 feet. Please measure before purchase Includes as shown in the picture.. Parameter The hose Working temperature range -76 to 446 -60 to 230.The 6AN and 8AN hose max working pressure 1500psi. Bursting pressure 4500psi.. Applicable Medium Evil Energy PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size The thread size of the 8AN fitting is 34-16 UNF. The AN side is sealed at a 37-degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 8AN straight fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252 -53 to 122. Feature The 8AN straight fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

ID 0.39inch. OD 0.55inch. Length 10 feet. Please measure before purchase Includes as shown in the picture.. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1500psi. Bursting pressure 4500psi.Min bending radius 101.6mm.. PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Applicable Medium Our PTFE fule hose kits is suit for all automotive fuels, lubricants, and coolants.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Fix Loose Fittings Dial in the Perfect Grip Our AN fitting tool doesn't care about brand variances. Two set screws let you perfectly center and clamp any standard socket nut. Simply tighten down for a dead-secure, leak-free fit with no play.. The 60-Second AN Fitting Install Ditch the wrenchs, bloody knuckles, and cuss words. Our AN hose assembly tool seats a fitting perfectly in under a minute. Save time and frustration on every fuel, oil, or transmission line job. Get back to what mattersdriving.. Complete Kit -4AN to -16AN Covered One AN fittings assembly tool handles the six most common AN sizes. All dedicated dies are included. No hidden costs, no hunting for extra adapters. Unbox it and get to work immediately on your car, truck, or boat.. Built for the Garage Tough 6061 Aluminum This AN fittings installation tool is CNC-machined from 6061-T6 aluminum alloy. We built it to take the torque and last a lifetime, so you can crank on it without worrying about flex or breakage.. Real Tool, Real Support Straight Talk Designed for CPE hose fitting installation only check your hose type. Got a problem or question Please find our team directly through Amazon..

Size ID 0.39 inch. OD 0.55 inch. Length 10ft. Minimum bend radius 4 101.6 mm. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

ID 0.39inch. OD 0.55inch. Length 20 feet. Please measure before purchase Includes as shown in the picture.. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1500psi. Bursting pressure 4500psi.Min bending radius 101.6mm.. PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Applicable Medium Our PTFE fule hose kits is suit for all automotive fuels, lubricants, and coolants.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

8AN braided fuel hose kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel line kit can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Package includes 6pcs 8an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree and 8an braided fuel line Length 10feet. Hose ID 716. Hose OD 0.642inch.. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Size The thread size of an8 hose end is 34-16 UNF, it only used to 8an stainless steel and nylon braided hose. 8AN line clamp's inner hole diameter is 0.63 inch 16mm.. Material Made of aluminum alloy 6061-T6 , anodized black surface.. Parameter Max Working Pressure 1500PSI. Working Temperature Range -65 to 252.. Function 8AN swivel hose end kit included multiple angle combinations of hose end fittings and 8an union to meet different installation needs. 8AN Separator Clamp used to secure and separate lines to keep your project clean and organized.. Application widely used to transmission line ,fuel filter ,fuel injection system,cooling system etc..

Size PTFE fuel 8an hose ID 1332 0.39 inch. OD 0.52 inch. Length 10ft. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Suitable for Wide Usage The PTFE fuel line is ideal for use in various high-temperature and high-pressure applications.. Applicable Medium The 8AN E85 fuel line is compatible with all automotive fuels, lubricants, and coolants.. Notice The -8 PTFE stainless steel braided fuel line is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

ID 0.39inch. OD 0.55inch. Length 16 feet. Please measure before purchase Includes as shown in the picture.. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1500psi. Bursting pressure 4500psi.. PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Applicable Medium Our PTFE fule hose kits is suit for all automotive fuels, lubricants, and coolants.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Size 6AN fuel hose ID 0.31inch. OD 0.45inch. Minimum Bend Radius 3.5 88.9mm. 8AN fuel hose ID 0.39inch. OD 0.55inch. Minimum Bend Radius 4 101.6mm. Length 10 feet. Please measure before purchase Includes as shown in the picture.. Working Pressure The 6AN and 8AN hose Working temperature range -76 to 446 -60 to 230. 6AN and 8AN fuel hose max working pressure 1500psi. Bursting pressure 4500psi.. Applicable Medium Our PTFE fuel hose kits is suit for all automotive fuels, lubricants, and coolants.. Suitable for Widely Usage PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Notice PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

BETTER KITS 26FT AN8 Fuel line 12pcs PTFE Hose End Fitting 4pcs Quick Disconnect Fitting 6pcs Hose Separator Clamp 2pcs 8AN Male Coupler 1pcs Standard Wrench 1pcs Way Reaming Tool.. SPECIFICATIONS Inner Diameter 1332 0.394Inch. Outside Diameter 0.543. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 2500psi. Bursting pressure 8000psi.. EFFECTIVELY PTFE fuel line can be compatible with all automotive fuelslubricantscoolant. Mostly used in EFI LS system and used as fuel injection hose, ls engine swap, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, vapor return line, etc.. MATERIAL The 8an fuel line kits made of more corrosion-resistant nylon Stainless Steel Braided PTFE Synthetic Rubber The fitting made of T6061 Aluminum. The material of union adapter is lightweight aluminum.. SERVICE 8AN PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended. If you have any questions, please contact with us, we are in 24 hours service.

SizeID 38 10mm, OD 23 17mm, Length 10FT.. Working ConditionsNBR Fuel Hose Working Temperature Range -40F to 257F. Working Pressure 300PSI. Burst Pressure 1160PSI.. Premium MaterialMade of premium NBR materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.. Applicable MediumNBR Fuel line can work with dieselbiodieselgasolineoilgreasewater and air, etc.. Wide ApplicationNBR Fuel Line Hose widely used in the fuel system, steam emission, oil cooling, please check the pressure of application before purchase..

Complete Hose fitting Kit The 8AN PTFE fuel line kit includes 20 ft of 8AN PTFE HoseHose End Fittings Adapter.Everything for a complete installation are included.. Diverse ApplicationPTFE fuel injection line kit is suitable for various automotive applications such as EFI LS swap system,transmission cooler system and fuel return system.. Working Parameter This 8an e85 fuel line kit is 20ft in length. Hose ID 0.37 inch Hose OD 0.55 inch Working temperature range -76 to 446 -60 to 230 Max working pressure 2500 psi Bursting pressure 8000 psi. Durable Construction The 8AN ptfe fuel line hose is reinforced with a triple-layer braid for strength and chemical resistance, coupled with lightweight, durable 6061-T6 aluminum AN fittings.. Flexible Hose The flexible nature of the AN8 PTFE Fuel line allows for easy routing and installation in tight spaces, accommodating complex layouts Note prevent sharp bend of the hose while routing .

2 FUNCTIONS IN 1 First, it reams and straightens cut PTFE hose ends for a perfect seal. Its exclusive design then gently separates the inner liner from the braid, creating a guided path for the ferrule to slide in deep and straight, eliminating leaks.. 4-IN-1 VERSATILITY Saves you money and toolbox space. No need to buy multiple tools for different ptfe fuel line sizes. Our tool is suitable for 4AN 6AN 8AN 10AN PTFE fuel line hose. Quickly switch the size between the two double-ended heads for the job at hand.. HEAVY-DUTY ERGONOMIC The tool's body is machined from solid aircraft-grade aluminum tough yet lightweight. The non-slip hex shape gives you a firm, secure grip even with oily hands, ensuring maximum control and force during installation.. BUILT TO LAST The working ends are made of corrosion-resistant stainless steel for long-term durability. The entire tool set is compact and portable, easily stashing in your glove box or tool pouch, ready for any repair or upgrade project.. COMPLETE INSTALLATION KIT We include a compact red 6AN wrench to finish the job. Its the perfect partner to our tool, allowing you to easily tighten AN fittings in tight space where standard AN fittings wrench wont fit. Get the full solution in one package..

Size PTFE fuel 8an hose ID 1332 0.39 inch. OD 0.52 inch. Length 20ft6m. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. PTFE Fuel Line Kit Applicable Medium All automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE stainless steel braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size The inner hole diameter is 0.63 inch 16 mm, which is suitable for clamping and mounting 8AN fuel lines.. Material The clamp is made of 6061-T6 aluminum alloy.. Function It is used to secure and separate transmission lines, helping to keep your project clean and organized.. Application The fuel hose separator clamp is widely used for fuel hoses, oil lines, brake lines, gas lines, water pipes, and more.. Note Five sizes of hose mounting clamps are available. Please measure the OD of your hose before purchasing..

Dimensions PTFE Fuel 8AN Hose Inner Diameter 0.39 inches 10mm Outer Diameter 0.55 inches 14mm Length 10 feet. Please be sure to measure and confirm before purchasing. Specifications Operating Temperature Range -76F to 446F -60C to 230C Max Working Pressure 2000 PSI Burst Pressure 6000 PSI.. Applications The PTFE 6AN fuel line kit is compatible with transmission fluid, diesel, biodiesel, engine oil, E85 gasoline, methanol, water, and various fuels.. Hose Material The fuel line kit is constructed from highly abrasion- and corrosion-resistant nylon material. It features a stainless steel braided layer over a PTFE synthetic rubber core, while the fittings are manufactured from T6061 aluminum alloymaking it an ideal choice for high-temperature and high-pressure operating environments.. Package Contents 10AN PTFE Hose Fittings 2 Straight, 2 x 45-Degree, 2 x 90-Degree, 1 Pair of Gloves, 1 Wrench, 2 x 10AN Hose Separator Clamps, and 10AN E85 Nylon-Braided Fuel Hose Length 10 Feet..

Size 8an hose ID 0.39 inch. OD 0.55 inch. Length 10ft. Minimum bend radius 4 101.6 mm. Please measure before purchase Includes as shown in the picture. Parameter The hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Package Included 1 12Ft 6AN Braided Fuel Hose 6pcs Swivel Hose Ends. Apply Models The fuel line hose fits different brands of different cars. Just choose the right size. Application for Racing Fuel, Pump Gas, Fuels with Ethanol, Alcohol Based Fuels, Motor Oil Coolant etc. Parameter 12 Stainless Steel Braided 6AN Fuel Line Inner Hose, Material CPE Synthetic Material Tubing, Hose SizeID AN 6, Length 3.6m12ft, Color Silver, Hose End SizeID AN 6, Color Red Blue Inner Diameter AN-6 38 Outer Diameter AN-9 916. Safety Features With anodized surface, it is hard and solid Working Temperature -40 to 350 Working Pressure 1000 PSI Burst Pressure 6000 PSI. Note This part is not legal for sale in the states of CA and NY. Professional Installer is Highly Recommended No Instruction Included.

Size Hose ID 0.41inch Hose OD 0.65inch Length 20 Feet. Please measure before purchase. Pressures Temp Range Maximum Working Pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 88.9mm.. Application The braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Material 8AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc..

Size NBR fuel hose ID 1213mm, OD 0.7519mm. Length 10 feet. Push lock fittings The thread size of 8an is 34-16UNF.. Parameter Fuel hose Working Pressure 300psi. Burst Pressure 1200psi.Temperature Range -40F to 257F.Minimum Bend Radius 4.7120mm. Fittings Max pressure 1500PSI. Temperature range -40 to 248.. Medium Compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Package includes 1Pc 12 30R7 fuel hose 10ft, 2pcs 8AN straight push lock hose end and 2pcs 8AN 90 push lock hose end.. Application The push lock fuel line kit widely used for fuel system,oil cooling,steam emission, etc..

The 6an braided fuel line kit can be compatible with 4L60E 4L65E Transmisson cooler.. The Hose ID 0.31. Hose OD 0.56.Length 15 Feet.Minimum bending radius63.5mm.. The hose Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 4pcs 6an swivel hose ends 2pcs straight, 2pcs 90degree,2pcs 6an hose separator clamp, 2pcs 6AN to 14NPT fittings, 2pcs 6AN 916-18 UNF Male Flare to 14-18 NPSM and 6an braided fuel line Length 15 Feet.. The hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose adapters are made of high-performance aluminum alloy..

NBR fuel hose ID 1213mm, OD 0.7519mm. Length 10 feet. Push lock fittings The thread size of 8an is 34-16UNF.. Fuel hose Working Pressure 300psi. Burst Pressure 1200psi.Temperature Range -40F to 257F.Minimum Bend Radius 4.7120mm. Fittings Max pressure 1500PSI. Temperature range -40 to 248.. The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc. The barb fitting works only with rubber fuel lines. This fitting is easy to install. It is recommended to use clamps to enhance sealing. The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant. 4pcs fittings are made of aluminum alloy 6061-T6. 4pcs hose clamps are made of 304 stainless steel. The 8AN female end features deep, full-depth threads for excellent leak resistance.. The push lock fuel line kit widely used for fuel system, oil cooling, steam emission, etc.. 1Pc 12 30R7 fuel hose 10ft, 2pcs 8AN straight push lock hose end and 2pcs 8AN 90 push lock hose end, 4pcs 304 stainless steel hose clamps..

8AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 6pcs 8an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 8an hose separator clamp,2pcs 8an to 8an Fitting and 8an braided fuel line Length 10 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Application The 8AN fuel line kit can be used as transmission cooler lines, turbo cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, oil feed line.. High Pressure Fuel LineWorking Temperature -73C to 260C Working Pressure 1000 PSI Burst pressure 5000 PSI. Diameter Inner diameter 10 mm Outside diameter 13.2 mm. Material The E85 fuel line kit is made of durable PTFE synthetic rubber tube bonded and secured by Nylon and 304 Stainless Steel outer braid Inner hose Material Stainless Steel PTFE Fuel Line. Features 1. PTFE fuel lines are ideal for high temperature and high pressure applications,such as fuel, petrol, diesel, E85. 2. Durable and highly temperature resistant, has less surface friction than rubber.

MaterialThe hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Features Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. CompatibilityThe braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Package Includes 1 x CPE Nylon Braided Line, 2 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 1 x Hose Separator Clamp..

Complete Hose fitting Kit The 8AN PTFE fuel line kit includes 10 ft of 8AN PTFE HoseHose End Fittings Adapter.Everything for a complete installation is included, featuring our signature high-visibility red and blue fittings for quick,pretty connections.. Working Parameter Hose ID 0.39 inch Hose OD 0.52 inch Length 10 feet Working temperature range -76 to 446 -60 to 230 Max working pressure 2500 psi Bursting pressure 8000 psi. High-Quality Materials The PTFE hose is reinforced with a triple-layer braid for strength and chemical resistance, coupled with lightweight, durable 6061-T6 aluminum AN fittings.. Diverse Application PTFE fuel injection line kit is suitable for various automotive applications such as EFI LS swap system, transmission cooler system and fuel return system.. Unique Features The Stainless Steel Braided PTFE Fuel Line is covered with NylonStainless Steel Braided and PTFE to enhance strength and resist all types of chemicals The PTFE AN Fittings is made of 6061-T6 lightweight Aluminum, anodized finish for great durability..

All You Need In One Kit The 8an Fuel Line Hose Kit includes 20FT Nylon Braided CPE Fuel Line and all the necessary fittingadapters for a hassle-free installation, greatly saving your time and budget. Long Lasting Durability The 8an cpe fuel line is designed for long-lasting performance resistance to wear and tear. The 8an hose end fittings are made by high quality aluminum, ensuring reliability in high temperature and pressure environment. Special Tool For Ease Of Install Equipped with AN Fitting Wrench and Soft Vise Jaws to prevent scratches while installing the hose fitting onto the 8an hose. The 8AN Hose Reaming Tool helps you to tidy up the incisions of hose for easy installation. Versatile Application 8AN braided fuel line is adept at handing automotive fuel, such as coolant, diesel, engine oil, hydraulic oil. Commonly used as fuel injection hose,fuel pump, fuel filter, transmission cooler system, etc. Note Not suitable for E85. Experience Excellent Performance Whethter you're a enthusiast or professional, upgrading an existing setup or building a custom engine system, this 8an 20ft fuel line kit offers versatility and adaptability to meet your specific requirements..

8an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 10pcs 8an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, and 8an braided fuel line Length 16 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Application Universal fuel filter, includes an6, an8, an10 adapters for different size applications.. Material Aluminum alloy fuel filter can and stainless steel filter element.. O-ring The o-ring provides a tight seal for fittings and end caps.. Function Can be used for filtering gasoline, diesel, E85, etc. Captures contaminant particles of 100 micron and above to protect the fuel system of the vehicle.. Feature Removable design, easy to clean or replace filter element at regular time..

ApplicationFit for any 4150 Based Carb, compatible with Holley Quick Fuel AED and more.. Easy InstallationWith simple structure, the dual feed fuel line is easy for you to install.. FunctionClean up the engine compartment and deliver the correct amount fuel at the correct smooth rate to carburetor to power your ride on the strip or street.. High QualityDual fuel line kit is made of high-quality aluminum alloy, not easy to leak, and long service life.. After-sale ServiceIf you have any questions, please feel free to contact usWe offer timely customer support to all buyers..

8AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 10pcs 8an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 8an hose separator clamp,2pcs 8an to 8an Fitting and 8an braided fuel line Length 20 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

3-Layer Construction - Built with high quality woven Nylon and 304 stainless steel braided CPE synthetic rubber . This 8AN nylon hose resists abrasion, corrosion, and looks great, offering durability and a racing-style finish.. Rated for Extreme Conditions - Engineered to perform. With a 500 PSI pressure rating and a -40F to 248F temperature range, this high-pressure hose delivers reliability in demanding environments. Universal Application - This professional 8AN braided hose handles oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85.It's the versatile core for building reliable fuel line, transmission cooler power steering systems.. Easy Cut-to-Fit Install - The 10ft 8AN hose is easy to cut for a perfect fit. Compatible with push lock fittings for tool-free, secure connections, making your fuel line kit installation simple.. Ideal for Upgrades - A trusted choice for high-flow fuel systems, turbo lines, and transmission cooler replacements. Upgrade from stock lines for enhanced performance and durability..

Unique Features The 8AN 20FT Fuel Line Hose is covered with NylonStainless SteelCPE Rubber to enhance durability, excellent corrosion resistance and give a cool racing appearance The AN Fittings is made of 6061-T6 aluminum, anodized black finish for great durability.. Working Parameter Hose ID 0.410.23mm, OD0.6717.02 mm Length 20 Feet Working Temperature Range -40 to 257 -40 to 125 Max Working Pressure 500PSI Bursting Pressure 2000PSI. Package Includes The 8AN Fuel Line Kit includes 6 PCS 8AN Hose End Fittings, 20 FT AN8 Stainless Steel Braided CPE Fuel Line, 4 PCS 8AN Hose Separator Clamp, 6 PCS Red Socket Nut, 2 PCS AN8 Male to male fittings adapter. Application 8AN Nylon Braided Hose Kit is compatible with coolant, diesel, engine oil, hydraulic fluid, etc Not suitable for E85 Can be used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. Support Professional installation is highly preferred. Recommend to install with our AN Wrench. If you have any questions and needs, please find our 24-hour Customer Service Team via Amazon.

Unique Features 8AN Fuel Line Hose Kit is covered with Stainless Steel Mesh and PTFE to enhance strength and resists all types of chemicals The Hose End Fittings is made of 6061-T6 lightweight aluminum, anodized black finish for good durability.. Working Parameter Hose ID 0.379.45 mm, OD 0.5514.1mm Length 20 Feet Working Temperature Range -76 to 446 -60 to 230 Max Working Pressure 2500 PSI Bursting Pressure 8000 PSI. Package Includes The 8AN Fuel Line Kit includes 10 PCS 8AN Hose Fittings, 20 FT AN8 Stainless Steel Braided Fuel line, 2 PCS 8AN Hose Separator Clamps, 10 PCS Red Socket Nut, 2PCS Male To Male Fitting, 1PCS AN Fitting Wrench. Application Nylon Braided PTFE Fuel Hose is widely used in the EFI LS system, fuel system, transmission system, cooler system and pump It can be works with all automotive fuels, E85, lubricants, motor oil and coolants.. Support Professional installation is highly preferred Recommend to install with our fittings adapter. If you have any questions and needs, please find our 24-hour Customer Service Team via Amazon..

Package Includes 1 x CPE Nylon Braided Line, 2 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 1 x Hose Separator Clamp.. Hose ID 0.43 inch11mm, Hose OD 0.64 inch16.25mm. Length 10 feet. Please measure before purchase.. Made of CPE synthetic rubber and nylon braided. Fittings included are not compatible with PTFE Hose, E85 and Rubber Hose.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Professional Installer is Highly Recommended. Free replacement without return if leak..

All You Need In One Kit The 8an Fuel Line Kit includes 20FT Stainless Braided PTFE Fuel Line and all necessary fittingadapters for a hassle-free installation, greatly saving your time and budget. Long Lasting Durability The 8AN PTFE fuel line is designed for long-lasting performance resistance to wear and tear. The 8an fittings red and blue are made by high quality aluminum, ensuring reliability in high temperature and pressure environment. Special Tool For Ease Of Install Equipped with AN Fitting Wrench and Soft Vise Jaws to prevent scratches while installing the hose fitting onto the 8an ptfe hose. The 8AN Hose Reaming Tool helps you to tidy up the incisions of hose for easy installation. Versatile Application 8AN PTFE braided fuel line is adept at handing automotive fuel, such as gasoline,ethanol,E85,oil and coolant. Commonly used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc. Experience Excellent Performance Whether you're a enthusiast or professional, upgrading an existing setup or building a custom system, this 8an ptfe fuel line kit offers versatility and adaptability to meet your specific requirements..

All You Need In One Kit The 8an Fuel Line Kit includes 20FT Nylon Braided PTFE Fuel Line and all the necessary fittingadapters for a hassle-free installation, greatly saving your time and budget. Long Lasting Durability The AN8 ptfe fuel line is designed for long-lasting performance resistance to wear and tear. The 8an fittings are made by high quality aluminum, ensuring reliability in high temperature and pressure environment. Special Tool For Ease Of Install Equipped with AN Fitting Wrench and Soft Vise Jaws to prevent scratches while installing the hose fitting onto the ptfe hose. The 8AN Hose Reaming Tool helps you to tidy up the incisions of hose and separate the braided layer from ptfe layer. Versatile Application 8AN PTFE braided hose is adept at handing automotive fuel, such as gasoline,ethanol,E85,oil and coolant. Commonly used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc. Experience excellent performance Whethter you're a enthusiast or professional, upgrading an existing setup or building a custom system, this 8an ptfe fuel line kit offers versatility and adaptability to meet your specific requirements..

Size Hose ID 0.41inch Hose OD 0.65inch Length 20 Feet. Please measure before purchase. Working Pressure Max working pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 88.9mm.. Application The fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Material 8an hose is made of CPE rubber inner, with a layer of 304 steel wire the hose fittings are made of aluminum alloy.. Compatibility Stainless steel braided fuel line kit can be compatible with transmission fluid, oil, race gas, and fuel, etc..

Size Hose ID 0.41inch Hose OD 0.65inch Length 10 Feet. Please measure before purchase. Pressures Temp Range Maximum Working Pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 88.9mm.. Application The braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Material 8AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc..

Size Hose ID 0.41inch Hose OD 0.65inch Length 20 Feet. Please measure before purchase. Pressures Temp Range Maximum Working Pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 88.9mm.. Application The braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Material 8AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc..

8AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 10pcs 8an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 8an hose separator clamp, 2pcs 8AN to 14 NPT Fitting, 8an braided fuel line Length 20 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

8AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 6pcs 8an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 8an hose separator clamp, 2pcs 8AN to 14 NPT Fitting, 8an braided fuel line Length 10 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Hose ID 0.41inch Hose OD 0.65inch Length 33 Feet. Please measure before purchase Includes as shown in the picture.. Working pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 88.9mm.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.. 8AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

Size Hose ID 0.41inch Hose OD 0.65inch Length 16 Feet. Please measure before purchase. Pressures Temp Range Maximum Working Pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 88.9mm.. Application The braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Material 8AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc..

Hose ID 0.41inch Hose OD 0.65inch Length 20 Feet. Please measure before purchase Includes as shown in the picture.. Working pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 88.9mm.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.. 8AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

Application 6AN braided fuel line kit widely used as fuel injection hose, LS engine exchange and EFI conversion fuel line.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with gasoline, diesel, and other fuels Except for E85 and ethanol. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Fuel Filter Regulator This fuel filter features an internal bypass that regulates fuel output pressure to 58psi. The LS Swap fuel pressure regulator has a built - in 10 micron fuel filter element to ensure that clean fuel is delivered to your engine, thus protecting the engine and increasing engine life.. Material 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp, 1pcs 6AN to 38 fitting, 1pcs 6AN to 516 fitting, 1pcs 6AN to 38 90 Degree Fitting, 1pcs fuel pressure regulator 58psi, 1pcs wrench and 6AN braided fuel line Length 25 Feet. Hose ID 0.31. Hose OD 0.56inch..

Size Hose ID 0.41inch Hose OD 0.65inch Length 10 Feet. Please measure before purchase. Pressures Temp Range Maximum Working Pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 88.9mm.. Application The braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Material 8AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc..

8an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 6pcs 8an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree and 8an braided fuel line Length 12 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

PRESSURE RATED - Built for heavy-duty use. With a 300 PSI working pressure and a 1400 PSI maximum burst pressure, this hose delivers reliable, leak-free performance in demanding high-pressure fuel and hydraulic systems.. 3-LAYER CONSTRUCTION - Built tough with a flexible CPE core, 304 stainless steel braid, and a protective nylon sleeve. This 8AN nylon hose resists abrasion, corrosion, and high burst pressure.. EXTREME CONDITION RATED - Engineered for reliability. Handles demanding pressure and a wide temperature range -40F to 248F for fuel systems, turbo, and transmission cooler applications.. HIGH FLOW FLEXIBLE - Features a 12-inch 8AN inner diameter for optimal fluid delivery. Its flexible design allows tight, kink-free beds for easy routing around engine bay obstacles.. EASY CUT INSTALL - The full 10ft 8AN hose is easy to cut to size. Compatible with 8AN push lock fittings for secure, tool-free connections, simplifying your project.. UNIVERSAL - The 8AN braided hose for oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85. Ideal for building a custom fuel line kit or replacing transmission cooler lines..

8an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 10pcs 8an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 6pcs 8an hose separator clamp,2pcs 8an to 8an Fitting and 8an braided fuel line Length 10 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Size 6AN fuel hose ID 0.31 OD 0.56. 8AN fuel hose ID 0.41 OD 0.65.Length 10FT.. Parameter 6AN and 8AN fuel hose maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range-22F to 248F.. Application Braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Medium Nylon and stainless steel braided fuel hose kit compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Kit Includes 6AN Fuel Hose Kit 1PCS and 8AN Fuel Hose Kit 1PCS as shown..

Size 12 Fuel line Hose ID 0.53, OD0.79, Length 20 Feet. Fittings8AN to 12 inch barb, and thread size of 8an is 34-16UNF. Note This kit uses a scientific stepped design. The push lock fitting and fuel line can be tightly connected with the clamp to achieve a sealed connection.. Pressures Temp Range Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature range-22F to 248F-30C to 120CMin bending radius 101.6mm.. Application 12 8an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Material 8an fuel line is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid. The hose fittings are made of aluminum alloy..

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. This wrench size can be adjusted to 3AN, 4AN, 6AN, 8AN, 10AN, 12AN, 14AN and 16AN. It's made of lightweight 6061-T6 aluminum. Featuring a curved design with a non-slip handle for a comfortable grip and fit for hand movement.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree,2pcs 6an hose separator clamp,1pcs wrench and 6an braided fuel line Length 20 Feet. Hose ID 0.31. Hose OD 0.56.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Size 6AN fuel hose ID 0.31 OD 0.56. 8AN fuel hose ID 0.41 OD 0.65.. Parameter Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Application Braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Medium Nylon and stainless steel braided fuel hose kit compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Kit Includes 6AN Fuel Hose Kit 1PC and 8AN Fuel Hose Kit 1PC as shown..

Size The 8AN hose ID 0.41 inch hose OD 0.65 inch. Length 20 feet.. Parameter Maximum working pressure of this 8AN steel braided hose 750 PSI burst pressure 2,250 PSI. Temperature range -22F to 248F. Minimum bend radius 3.5 inches.. Material The 8AN stainless steel fuel line is made of a CPE rubber inner layer, and a braided 304 stainless steel outer layer. The hose fittings are made of tough aluminum alloy, and the gloves featuring a nitrile coating that offer maximum protection.. Package Includes The package includes 10PCS of 8AN swivel hose ends 4PCS straight, 2PCS 45-degree, 2PCS 90-degree and 2PCS 180-degree, 2PCS hose separator clamps, one 8AN stainless steel braided hose, one installation tool and a pair of gloves.. Compatibility The 8AN fuel line kit is compatible with transmission fluid, race gas, vacuum, hydraulic fluid, diesel, and fuel..

Versatile Applications Our 8an fuel line kit finds utility in various automotive fuel systems, including turbine cooler, transmission, oil return, and transmission cooler pipelines, making it ideal for fuel transportation services.. Premium Materials Crafted with a robust double-layered structure comprising outer nylon and middle stainless steel wire braid, tightly encasing a CPE rubber inner layer. This design relieves internal pressure, reduces wear, enhances flexibility and mechanical strength. Our fuel hose kit is designed for diesel, gasoline, and transmission fluid excluding E85.. Exceptional Durability Featuring a 3-layer construction, our fuel hose end fitting kit boasts a remarkable 2000psi burst pressure, with a maximum working pressure of 500psi. It operates in temperatures ranging from -40F to 257F, ensuring reliability even in extreme conditions.. Multiple Fittings Included The braided fuel line features 0.43in inner diameter, 0.64in outer diameter, and a generous 20ft length our fuel line kit is equipped with 12 fittings, perfectly compatible with the 8AN swivel hose end.. Leakproof Seal To ensure long-term leakage prevention and a consistent seal, the fuel line kit comes with 10 sealing rings that ensure a tight and trouble-free connection..

IncludesThe 8AN nylon and stainless steel braided fuel line kit includes 4pcs 8an hose ends 2 x 0 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends and 38 braided fuel line Length5ft. Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Length 5 Feet. Please measure before purchase.

IncludesThe 8AN nylon and stainless steel braided fuel line kit includes 4pcs 8an hose ends 2 x 0 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends and 38 braided fuel line Length5ft. Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Length 5 Feet. Please measure before purchase.

High-Performance Braided HoseConstructed with a CPE rubber inner core, reinforced by a 304 stainless steel wire layer, and finished with a nylon outer braid. Engineered for extreme durability with a working temperature range of -40F to 320F -40 to 160, maximum working pressure of 500 PSI, and burst pressure of 3000 PSI. Precision Push-Lock Hose EndsIncludes 10 black anodized aluminum fittings 4 straight, 2x 45, 2x 90, 2x 180. Designed specifically for push-on-lock and twist-lock installationno special tools required for a secure, leak-free seal.. Versatile Fluid CompatibilityIdeal for a wide range of automotive applications including transmission cooler lines, oil feedreturn lines, coolant hoses, vacuum lines, and turbo lines. Compatible with transmission fluid, engine oil, hydraulic fluid, diesel, and race fuels.. Package Included4 X AN-8 Straight Reusable Swivel Hose End 2 X AN-8 45 Degree Reusable Swivel Hose End 2 X AN-8 90 Degree Reusable Swivel Hose End 2 X AN-8 180 Degree Reusable Swivel Hose End 1 X AN-8 Nylon Braided Hose - 5M16.4 Feet You will get exactly the same as picture shows. 247 Customer SupportmaXpeedingrods provides lifetime technical support and a 1-year limited warranty for quality-related issues from the purchase date. Our customer service team is always ready to assist you..

Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications.. The AN8 nylon and stainless steel braided PTFE fuel injection line kit includes 10pcs 8AN PTFE hose end fittings 4pcs straight, 2pcs 45 degree, 2pcs 90 degree, 2pcs 180 degree, 2pcs 8AN hose separator clamp and AN8 PTFE braided fuel line Length 20feet. Braided Fuel Hose Inner Diameter 1332. Outside Diameter 0.543inch. Please measure before purchase. Working temperature range -76 to 446 -60 to 230. Maximum Working Pressure psi 2500 psi. Bursting Pressure psi 8000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances.. PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

8AN 20FT Fuel Line Hose Kit with Fitting, Stainless Steel Braided 12 CPE Fuel Oil Hose- 11.12mm ID. Packaging includes20FT Stainless Steel Braided Fuel Line . AN8-0 Degree fitting 4,AN8-45 Degree fitting 2,AN8-90 Degree fitting 2,AN8-180 Degree fitting 2,Clamp 2,AN8 wrench 1. The 8AN hose working temperature range -40 to 257 -40 to 125. It is compatible with nearly every substance or agent used. Maximum Working Pressure psi 500 psi. Bursting Pressure psi 2000psi..

Application Universal,Such as fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars motor racing bikes.. Inside Diameter 10.8 mm 2764,Outside Diameter 14.7 mm 3764. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Temperature Rating -100F to 500F -73C to 260C under most operating conditions.Pressure Rating 1000 Working PSI 5000 Burst PSI.. Package Includes1x 20ft AN-8 Black Nylon PTFE Fuel Hose,4x AN-8 Straight PTFE Fitting,2x AN-8 45 degree PTFE Fitting,2x AN-8 90 degree PTFE Fitting,2x AN-8 180 degree PTFE Fitting. Professional Installer is Highly Recommended..

Unique Features The 6AN e85 fuel line is covered with NylonStainless Steel Braided and PTFE to enhance strength and resist all types of chemicals The PTFE AN Fittings is made of 6061-T6 lightweight Aluminum, anodized finish for great durability Included an adjustable AN fittings wrench and a PTFE hose assembly tool for your easier hose assembly. Working Parameter AN6 PTFE Braided Fuel Hose ID 0.31 8 mm, OD 0.44 11.3 mm Length 25 Feet Working Temperature Range -76 to 446 -60 to 230 Max Working Pressure 3000 PSI Bursting Pressure 10000PSI. Universal Application PTFE nylon braided fuel line kit can be used in EFI LS system, Fuel system, transmission system, brake system and cooler system Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, etc. Package Including The 6AN Fuel Line Fittings Kit includes 14 PCS 6AN PTFE hose fittings , 25 Ft AN6 stainless steel braided PTFE fuel line , 1 PCS adjustable AN hose fittings wrench , 1 PCS PTFE hose assembly tool , 2 PCS 6AN hose separator clamp , 8 PCS socket nut , 2 PCS male flare plug with hex head. Support Professional installation is highly preferred Recommend to install with our AN Fittings Wrench If you have any questions and needs, please find our 24-hour Customer Service Team via Amazon.

Those 8AN fittings are made from 6061-T6 Aluminum with hard-anodized black coatings.Our one-piece fittings are mandrel-bent from a single piece of aluminum rather than being two pieces brazed together. One-piece fittings have better flow and fewer leak points.. The flexible 20FT nylon hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid. 20 feet is usually enough for a full feed line from the tank to the rail on most coupes and sedans.CPE hoses can use cutter-style or compression-style fittings.You simply push the hose into the socket and screw the nipple in. The nipple cuts into the rubber to create a high-pressure seal.. Engineered to handle working pressures up to 500 PSI and burst pressures of 2000 PSI. Temperature range -40F to 300F -40C to 150C. Widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Package includes 10pcs 8AN swivel hose ends 4-pcs straight, 2-pcs 45 degree, 2-pcs 90 degree, 2-pcs 180 degree, 2pcs 8an hose separator clamps and 8AN braided fuel line Length 20 Feet, 1-pc hex key screwdriver for the clamps. Hose ID 0.41 inch. Hose OD 0.64 inch. Total 14 pieces in the package you will get.. When assembling lines, use a drop of oil on the threads and the nipple of the fitting before assembly. This prevents the rubber from tearing and ensures a smooth seal. Also, use aluminium AN wrenches if possible..

Size 8an hose ID 0.39inch. OD 0.55inch. Length 33 feet. Please measure before purchase Includes as shown in the picture.. Working Pressure Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1500psi. Bursting pressure 4500psi.. Applicable Medium Our PTFE fuel hose kits is suit for all automotive fuels, lubricants, and coolants.. Suitable for Widely Usage PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Notice PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Size 8an hose ID 0.39. OD 0.55. Length 20ft. Minimum bend radius 4 101.6 mm. Please measure before purchase Includes as shown in the picture. ParameterThe hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI. The fittings Working temperature range -40 to 250. Maximum working pressure 1,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Antistatic Protection Features a conductive graphene inner layer, PTFE fuel line kit can dissipate static electricity and reduce the risk of sparking, ensuring the reliable fuel transfer. Resistant to high temperature and corrosion, the kit is suitable for use in harsh environments.. Size and Installation 8AN PTFE fuel hose ID 0.39 inch9.9mm OD 0.55 inch13.9mm Length 20 Feet. Installation instructions are included. Please measure before purchase. Temperature and Pressure Range 8AN fuel line working temperature range -76 to 446 -60 to 230. Max working pressure 1500 psi. Bursting pressure 4500 psi.Minimum bend radius101.6mm4inch.. Universal Compatibility The conductive PTFE hose fits with diesel, biodiesel, gasoline, E85, methanol, water, air, and transmission fluids. For hazardous environments, we recommend using conductive PTFE fuel lines for fuel supply systems, such as fuel injection systems, turbochargers, carburetors, LS engines, and fuel return systems.. Kindly Note 8AN braided fuel hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended.For optimal performance, we recommend using Evil Energy's PTFE fittings..

Application Universal fuel filter, includes an6, an8, an10 adapters for different size applications. With mounting bracket keeps the engine bar stylish and clean.. Material Aluminum alloy fuel filter can and stainless steel filter element.. O-ring The o-ring provides a tight seal for fittings and end caps.. Function Can be used for filtering gasoline, diesel, etc.Not E85 Captures contaminant particles of 10 micron and above to protect the fuel system of the vehicle.. Feature Removable design, easy to clean or replace filter element at regular time.. Installation Tips We have debugged the installation direction of the fuel filters before delivery. Please check and ensure the closed end of the filter element docks with the spring. Let the liquid flow following the arrow from the spring end to the other end, and the fuel filter will serve longer..

Fits For The braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. Working Parameter Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257. Package includes 10Pcs 8AN swivel hose ends 4Pcs straight, 2Pcs 45degree, 2Pcs 90degree, 2Pcs 180degree, 2Pcs 8AN hose separator clamp and 8AN braided fuel line Length 20 Feet. Hose ID 0.43inch. Hose OD 0.642inch. Application The Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. Warranty LokoCar provide 6-months warranty for the fuel line kits. Please feel free to contact us via Amazon message.

Fits For The braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. Working Parameter Maximum Working Pressure 2500psi. Bursting Pressure 8000psi. Temperature Range -76 to 446 -60 to 230. Package includes 6Pcs 8AN swivel hose ends 2Pcs straight, 2Pcs 45degree, 2Pcs 90degree, 2Pcs 8AN hose separator clamp and 8AN braided fuel line Length 10Feet. Hose ID 1332. OD 0.543inch. Application The Nylon braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. Warranty LokoCar provide 6-months warranty for the fuel line kits. Please feel free to contact us via Amazon message.

Nylon Braided CPE Fuel Line Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.. Universal Application The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided add CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Safety Features For Your Protection Fuel Hose Size 6AN, Length 12FT, Working Temperature -100 F to 500 F, Pressure Tolerance 350 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. Package Includes 1 6AN 12FT Nylon Braided Hose, 2 Straight Swivel Hose Ends, 2 45 Degree Swivel Hose Ends, 2 90 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..

Size ID of 8an fuel hose0.4110.5mm,OD0.6516.5mm. Length10ft.. Application 8AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.. Parameter Working pressure750psi,burst pressure2250psi Temperature range-40F to 257F-40C to 125C Min bending radius88.9mm.. Material 8an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

Package Including 20 Ft Braided FuelOilGas Line Kit10pcs 8AN hose fittings 20 Ft AN8 Stainless Steel Oil line. Universal Application The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.. Hose Material 304 Braided Stainless Steel CPE Synthetic Rubber The fitting made of T6061 Aluminum,high strength and good durability.. Working Temperature -40 F to 248 F under most operating. Working Pressure1015 PSI. Features Maximized Resistance to Heat, Corrosion and Abrasion.

Nylon Braided CPE Fuel Line Best Replacement for Oil gas line, Fuel hose ,Clutch hose,Turbo line .Recommended Replacement for Alcohol, Nitro, transmission, clutch, nitrous, power steerig, oiling, hydraulic vacouum applications.. Universal Models The fuel line hose Replacement for different brands of different cars.Just choose the right size. Not Replacement for E85.. Fuel Hose SizeID AN 8, Length 6.09m20ft, Working Temperature -40F to 350F ,Pressure Tolerance 1500 PSI, Material T7 Aluminum Alloy Nylon,. Fuel Hose Ends SizeID AN 8, Material T7 Aluminum Alloy. Professional Installer is Highly Recommended No Instruction Included.

Application Universal,Such as fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars motor racing bikes. Not PTFE. MaterialBased on premium stainless steel Aluminum Alloy materials Nylon, firmly, securely, light weight and portable. Hose SizeID AN 8, Length 6m20ft, Pressure Tolerance 1500 PSI, Color Black Hose End SizeID AN 8, Color Black. Professional installation is highly recommended. Recommended to use Adjustable AN Wrench.. Package Includes 1 x Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends.

Features8AN fuel line hose kit Black braided nylon fuel hose has a full black nylon fiber braided jacket and chlorinated polyethylene CPE synthetic rubber inner line.. Application8AN nylon braided hose kit can usually be used with coolant, diesel, engine oil, hydraulic oil, pump air, air and fuel. Please note that the service life may be shortened when using fuel. Not suitable for E85. This kind of braided 8AN hose can be used for brake system, fuel pump, fuel filter, oil return, oil return system, turbo cooler system, transmission system, oil cooler kit, etc.. Safety FeaturesThe 8AN CPE hose working temperature range -100 to 500 -73 to 260. It is compatible with nearly every substance or agent used. Maximum Working Pressure psi 500 psi. Bursting Pressure psi 2000psi.. Package IncludesThe 8AN fuel line hose kit includes 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends and 58 CPE braided fuel line Length20ft6M. WarrantyProfessional installation is highly recommended. Recommended to use Adjustable AN Wrench. We offers 3 months limited warranty Free lifetime technical support..

Application Universal,Such as fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars motor racing bikes.. MaterialBased on premium stainless steel Aluminum Alloy materials Nylon, firmly, securely, light weight and portable. Hose SizeID AN 8, Length 6m20ft, Pressure Tolerance 1500 PSI, Color Black Hose End SizeID AN 8, Color Black. Professional installation is highly recommended. Recommended to use Adjustable AN Wrench.. Package Includes 1 x Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends.