Size The thread size of 8AN and AN8 ORB is 34-16 UNF.. Seal The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring.. Material Made of aluminum alloy 6061-T6 body and NBR rubber O-ring.. Parameter Working pressure 1500PSI. Working temperature-65F-252F. O-ring temperature range -4F-392F.. Application Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc..

8an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Package includes 10pcs 8an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 8an hose separator clamp and 8an braided fuel line Length 20 Feet. Hose ID 0.43. Hose OD 0.642inch.. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

8an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 10pcs 8an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 6pcs 8an hose separator clamp,2pcs 8an to 8an Fitting and 8an braided fuel line Length 20 Feet. Hose ID 0.41. Hose OD 0.64inch.. 8an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Size The thread size of AN8 hose end is 34-16 UNF, it only used to 8AN stainless steel and nylon braided hose. 8AN line clamp's inner hole diameter is 0.63 inch 16mm. Material Made of aluminum alloy 6061-T6 , anodized black surface. Parameter Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122. Function 8AN swivel hose end kit included multiple angle combinations of hose end fittings and 8AN union to meet different installation needs. 8AN Separator Clamp used to secure and separate lines to keep your project clean and organized. Application widely used to transmission line ,fuel filter ,fuel injection system,cooling system etc.

Size The thread size of AN8 is 34-16 UNF. Parameters Working Pressure 1500PSI. Temperature range -40F to 250F-40C to 121C. Sealing The AN flare side is sealed by a 37 degree angle. Material Made of 6061-T6 aluminum and reinforced with black anodized aluminum for greater corrosion resistance. Application Widely used in automotive fuel systems, such as carburetors and injectors, as well as fluid systems.

Size Thread Size of 8AN PTFE Fitting is 34-16UNF.. Application The PTFE Hose End only work with PTFE fuel line.. Parameter Working pressure 1500PSI. Temperature range -65F-252F.. Seal The AN side is sealed by a 37 degree angle.. Material and Feature Made of aluminum alloy 6061-T6. 360 Swivel design for easy assembly..

Size Thread Size of 8AN PTFE Fitting is 34-16UNF.. Application The PTFE Hose End only work with PTFE fuel line.. Parameter Working pressure 1500PSI. Temperature range -65F-252F.. Seal The AN side is sealed by a 37 degree angle.. Material and Feature Made of aluminum alloy 6061-T6. 360 Swivel design for easy assembly..

Size Thread Size of 8AN PTFE Fitting is 34-16UNF.. Application The PTFE Hose End only work with PTFE fuel line.. Parameter Working pressure 1500PSI. Temperature range -65F-252F.. Seal The AN side is sealed by a 37 degree angle.. Material and Feature Made of aluminum alloy 6061-T6. 360 Swivel design for easy assembly..

Product Size Parameter Size 8AN. Thread Size 34-16 UNF. Working Pressure 1500PSI. Working Temperature Range -40F-248F. Angle 90 Degrees. Note Please verify the hose size before purchase.. Application The fittings help connect and route fuel hoses in tight spaces. Only for use with PTFE fuel lines for E85, alcohol, nitro, clutch, nitrous, power steering, oiling, hydraulics, and vacuum applications.. Easy Installation Require an AN adjustable wrench for installation. A 360 swivel design provides enough flexibility for easy assembly.. Anti-Leak Seal At the AN side, there is a 37-degree flare angle to form a complete seal without applying an extra sealing compound.. Built to Last The one-piece PTFE hose end fitting is made from lightweight 6061-T6 aluminum alloy, and a black anodized finish on the surface increases durability, anti-corrosion, and wear resistance..

size This fitting is 8AN to 38 barb.The thread specification for the 8AN push-lock hose fitting is 916-18 UNF. Parameter Maximum working pressure1,500 PSI.Working temperature range -40F to 248F. Material Made of aluminum alloy 6061-T6 , anodized black surface. FeatureThe barb fitting works only with rubber fuel lines.. ApplicationPush-lock hose fittings are widely used in fuel systems, oil coolers, and as transition fittings for fuel, oil, or coolant lines..

Size This fitting is 8AN to 12 barb. The thread size of the 8AN end is 34-16 UNF. Application The barb fitting works only with rubber fuel lines. Parameter Maximum working pressure 1,500 PSI. Temperature range -40 to 248. Material The straight fitting is made of 6061-T6 aluminum alloy. Installation This 8AN to straight fitting is easy to install. It is recommended to use clamps to enhance sealing.

Size AN8 to 38 NPT, the thread size of 8AN is 34-16 UNF.. Material Made of aluminum alloy 6061-T6, anodized black surface.. SealingThe AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread.. Application Widely used in cars' fuel systems, cooling systems, power steering systems, etc.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended..

Size The thread size of 8AN is 34-16 UNF. The AN side is sealed by a 37 degree angle.. Application The swivel fitting is only work with stainless braided and nylon braided hose .. Material Made of aluminum alloy 6061-T6.. Parameter Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. Feature 360 Swivel design for easy assembly. It can be reused and recycle..

Size The thread size of the 8AN fitting is 34-16 UNF. It is suitable for 8AN hoses. Parameter Maximum working pressure 1,500 PSI. Working temperature range -40 to 250 -40 to 121. Material The 8AN to fitting is made of high-strength 6061-T6 aluminum alloy. The hose end is black anodized to provide added corrosion and wear resistance. Sealing The AN side of the hose end is sealed at a 37-degree angle. Compatibility The male hose end straight fittings work only with stainless steel braided and nylon braided CPE hoses. They are not compatible with other types of hoses.

Size 8AN flare to 38 NPT, the thread size of 8AN is 34-16 UNF, Degree 90 degree elbow. Material Made of aluminum alloy 6061-T6, anodized black surface.. SealingThe AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread.. Application Widely used in fuel systems, cooling systems, power steering systems, etc.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench..

Size 8AN male flare to 12 inch, the thread size of the 8 AN is 34-16 UNF. Fits to 12 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 12 compression to 8an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. NoteOnly applicable to stainless steel or aluminum hardline..

Size The fitting is a female AN8 to male AN6. The thread size of the 8AN is 34-16 UNF. The thread size of the 6AN is 916-18 UNF.. Parameter The maximum working pressure is 1,500 PSI. The temperature range is -40F to 250F.. Material The fitting is made of aluminum alloy 6061-T6 with a black anodized surface.. Sealing The AN side is sealed at a 37-degree angle.. Application The fitting is widely used in fuel systems, cooling systems, LS swaps, and more..

Size The thread size of the 8AN male coupler is 34-16 UNF.. Seal The AN thread of the flare is sealed by a 37-degree angle.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The coupler is made of aluminum alloy 6061-T6.. Application The male-to-male flares coupler is usually used in fuel systems, such as extending fuel hoses, connecting lines to fuel pumps, and cooler systems..

Size The fitting is female AN8 to female AN8. The thread size is 34-16 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40 to 250.. Sealing The AN side of the flare is sealed by a 37-degree angle.. Material The fitting is made of aluminum alloy 6061-T6 with a black anodized surface.. Feature The fitting is designed with a 360 swivel for easy assembly, and it can be reused and recycled..

Size 8AN female to 12 inch, the thread size of the 8AN is 34-16 UNF. Fits to 12 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 12 compression to 8an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. Note Only applicable to stainless steel or aluminum hardline..

Size This fitting is 8AN to 12 barb. The thread size of the 8AN end is 34-16 UNF. Application The barb fitting works only with rubber fuel lines. Parameter Maximum working pressure 1,500 PSI. Temperature range -40 to 248. Material The 90-degree fitting is made of 6061-T6 aluminum alloy. Installation This 8AN 90-degree fitting is easy to install. It is recommended to use clamps to enhance sealing.

Size The thread size of the 8AN fitting is 34-16 UNF. The threaded end is sealed at a 37-degree angle. Feature The profile of the hose end is more compact and is suitable for tight spaces. Application The hose fitting works only with stainless steel braided and nylon braided hoses. Material The 8AN 90-degree fitting is made of 6061-T6 aluminum alloy. The bending part is produced through a forging process. Parameter Maximum working pressure 1,500 PSI. Working temperature range -40 to 250 -40 to 121.

Size The thread size of the 8AN fitting is 34-16 UNF.. Seal The AN thread of the flare is sealed by a 37-degree angle.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The coupler is made of aluminum alloy 6061-T6 with a black anodized surface.. Feature The 360 swivel design makes it easy to install and helps save time.

Size The fitting has a total length of 45 mm, and the AN8 thread size is 34-16 UNF.. Sealing The AN flare side is sealed by a 37-degree angle.. Specifications Maximum working pressure is 1500 PSI. Working temperature range is -40F to 250F.. Material The fitting is made of high-strength 6061-T6 aluminum alloy with an anodized surface.. Application The extender fitting provides different additional lengths. It is widely used in fuel systems, cooling systems, and more..

100 QUALITY MATERIALThe fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum.Working Temperature Range -65 to 252 -53 to 122.Max Working Pressure 1000psi.. EASY INSTALLATIONSwivel fittings are easy to use and don't require special equipment. These new full flow swivel hose ends swivel to allow for a quick alignment of the hose after assembly.. WIDELY APPLICATIONS8AN swivel hose end 8an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on.. Package Including2pcs 8AN Straight hose fitting 2pcs 8AN 45 Degree hose fitting 2pcs 8AN 90 Degree hose fitting 2pcs 8AN 180 Degree hose fitting 6pcs 8AN Hose Separator Clamp 2pcs 8AN male coupler. 100 SATISFACTIONIf you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..

Size The fitting is an AN8 to 12 NPT adapter, and the thread size of the 8AN is 34-16 UNF.. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Sealing The AN side of the flare is sealed at a 37-degree angle, and the NPT thread side is sealed with 60-degree tapered threads.. Application The fitting is widely used in fuel systems, cooling systems, power steering systems, and more.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. The fitting allows easy installation and removal with a wrench..

Product Size Parameter Size 8AN. Thread Size 34-16 UNF. Working Pressure 1500PSI. Working Temperature Range -40F-250F. Angle 90 Degrees. Note Please verify the hose size before purchase.. Application These fittings are ONLY used with PTFE fuel lines for E85, alcohol, nitro, clutch, nitrous, power steering, oiling, hydraulics, and vacuum applications. A 360 swivel design allows for easy assembly.. Full Flow Hose End Precision CNC machined hose end fitting features excellent wall thickness and achieves uninterrupted flow.. Anti-Leak Seal At the AN side, there is a 37-degree flare angle to form a complete seal without applying an extra sealing compound.. Built to Last The one-piece PTFE hose end fitting is made from lightweight 6061-T6 aluminum alloy, and a black anodized finish on the surface increases durability, anti-corrosion, and wear resistance..

Size The thread size of the 8AN male coupler is 34-16 UNF.. Seal The AN thread of the flare is sealed by a 37-degree angle.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The fitting is made of aluminum alloy 6061-T6.. Application The male-to-male flare coupler is usually used in fuel systems, such as extending fuel hoses or connecting lines to fuel filters, fuel pumps, or cooler systems..

Size The thread size of the 8AN fitting is 34-16 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 8AN straight fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252-53 to 122. Feature The 8AN straight fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size The thread size of an8 hose end is 34-16 UNF, it only used to 8an stainless steel and nylon braided hose. 8AN line clamp's inner hole diameter is 0.63 inch 16mm.. Material Made of aluminum alloy 6061-T6 , anodized black surface.. Parameter Max Working Pressure 1500PSI. Working Temperature Range -65 to 252.. Function 8AN swivel hose end kit included multiple angle combinations of hose end fittings and 8an union to meet different installation needs. 8AN Separator Clamp used to secure and separate lines to keep your project clean and organized.. Application widely used to transmission line ,fuel filter ,fuel injection system,cooling system etc..

Fittings Size8AN male to 8AN male 34-16 UNF. Angle 90 degree.Max Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. High Quality MaterialMade of High-Quality Lightweight T-6061 Aluminum Material,high strength and good durability Polished and anodized for bright appearance and corrosion protection. Wide Range Of Applications8AN to 8AN adapter is suitable for kinds of liquids, oil, water, air, fuel lines, E85, gas etc, widely used in oil coolerfuel tankfuel pumpfuel filterfluid line. Good TightnessThe AN port has a 37 sealing angle flare assure a positive seal at maximum operating pressures. Quality ServiceWe provide a Two-month Return ServiceWhen You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You.

Size 8AN to 12 inch barb, and thread size of 8an is 34-16UNF.. Application The barb fitting only work with rubber fuel line.. Parameter Max working pressure 1500PSI Temperature range -40 to 248.. Material Made of aluminum alloy 6061-T6.. Installation Easy to install, it is recommended to use clamps to enhance sealing..

Size The AN8 female to female fitting has a thread size of 34-16 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is from -40 to 250.. Sealing The AN side is sealed at a 37-degree angle.. Material The fitting is made of aluminum alloy 6061-T6.. Feature The fitting features a unique cutter style and a one-piece full-flow design for smoother flow..

Size The thread size of the 8AN fitting is 34-16 UNF. The AN side is sealed at a 37-degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 8AN 90-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252 -53 to 122. Feature The 8AN 90-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size Thread size of 8AN is 34-16 UNF. Parameters Working Pressure 1500PSI. Temperature range -40F to 250F-40C to 121C. Sealing The AN thread of the flare is sealed by a 37 degree angle. Material Made of 6061-T6 aluminum and reinforced with black anodized aluminum for greater corrosion resistance. Application Widely used in automotive fuel systems, such as carburetors and injectors, as well as fluid systems.

SIZE The thread size of 8AN hose end fitting is 34-16 UNF. The AN side meets industry standard ANJIC flared 37 degree sealing surface to ensure no leakage in high pressure environment. PREMIUM MATERIAL KOOTANS fittings are made of lightweight aluminum alloy 6061-T6 material for high strength and extreme durability. Black anodized for good corrosion resistance and wear resistance. EXQUISITE TECHNOLOGY The 360 swivel design is easy to install and simplify the pipeline connection, and it can be disassembled and used repeatedly. Our thread structure adopts precision machining to ensure tight connection and no leakage. WORKING ENVIRONMENT Fuel line fittings with max working pressure up to 1500psi, temperature range of -65F to 252F -53C to 122C. WIDE APPLICATION Hose end fittings widely used to transmission line, fuel filter, fuel injection system, cooling system etc. Compatible with oilfuelwaterair fluid line systems. The swivel fitting is only suitable for stainless braided and nylon braided hose, not compatible with PTFE hose and rubber hose.

Size The thread size of the 8AN fitting is 34-16 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 8AN 90-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252 -53 to 122. Feature The 8AN 90-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size The fitting is an AN8 to 12 NPT adapter, and the thread size of the 8AN is 34-16 UNF.. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Sealing The AN side of the flare is sealed at a 37-degree angle, and the NPT thread side is sealed with 60-degree tapered threads.. Application The fitting is widely used in fuel systems, cooling systems, power steering systems, and more.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended..

Size The thread size of 8an is 34-16 UNF.. Parameters Working Pressure 1500PSI. Temperature range -40F to 250F.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. Material Made of 6061-T6 aluminum, anodized black surface.. Application Widely used in automotive fuel systems, such as carburetors and injectors, as well as fluid systems..

Size The fitting is female AN8 to female AN8, and the thread size is 34-16 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40 to 250.. Sealing The AN side of the flare is sealed by a 37-degree angle.. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Feature The fitting is designed with a 360 swivel for easy assembly, and it can be reused and recycled..

Wide ApplicationsThe swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with all CPE stainless braided and nylon braided hose. They are not compatible with PTFE hose, E85, rubber hose. High Quality MaterialThe female AN 90 Degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure 1500psi. Working Temperature Range -40 to 250. Can be suitable for competition applications where reduced weight is needed. Easy to UseThe swivel hose end are easy to install, We normally recommend a bit of assembly lube to help prevent any galling.That gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. High Traffic DesignThe outer diameter of a regular 8AN fittings channel is 13mm, while the outer diameter of a full flow fittings channel is 20.7mm, which can better facilitate the rapid flow of fuel. Quality ServiceWe provide a Two-month Return ServiceWhen You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You.

Fuel pressure take off fitting AN8 Male to -8 Female with 18 NPT GaugeGage Port,the thread size of the 8AN is 34-16UNF.. Sealing The AN thread of the flare is sealed by a 37 degree angle and the NPT is sealed with a 60 degree tapered.It is highly recommended to use sealant or PTFE polytetrafluoroethylene tape at the NPT port.. Material Made of 6061-T6 aluminium alloy.. Max working pressure 4000PSI,working temperature -76F to 572F.. EVIL ENERGY provide 8an fuel pressure gauge fitting 3-month warranty. Any problem you might have,please feel free to contact us via Amazon message..

Parameter This 8AN braided fuel line can withstand high pressure and has a long-lasting lifespan. Maximum working pressure 750 PSI. Bursting pressure 2,250 PSI. Temperature range -22 to 248.. Material The 8AN hose has a CPE rubber inner layer, a layer of 304 steel wire, and a nylon outer braid.. Compatibility The braided fuel hose is compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel, fuel, and more.. Suitable for Widely Usage The 8AN braided fuel line is used for many purposes, including transmission oil cooler lines, fuel return lines, fuel supply lines, coolant fluid hoses, fuel gauge lines, vacuum lines, turbo cooler lines, and oil feed lines.. Size and Installation Hose ID 0.41 inch Hose OD 0.65 inch Length 20 Feet. Installation instructions are included.It works with 8AN swivel hose end only..

Size This fitting converts a male AN8 to a female AN6 connection. The thread size for 6AN is 916-18 UNF, and the thread size for 8AN is 34-16 UNF.. Material This fitting is made of 6061-T6 aluminum alloy with a black anodized finish.. Sealing The AN flare side is sealed by a 37 degree angle.. Specifications The maximum working pressure is 1500 PSI, with a working temperature range from -65 to 252.. Application It is widely used in fuel systems, cooling systems, EFI systems, LS swap projects, and more..

Full Customization in One Kit This 23-piece kit includes 8x 8AN barb fitting 04590180, 8x hose clamps, 4x males fittings, 2x hose clamps exclusive wrench protectors. Mechanics-approved 92 of jobs completed with just 1 box. No more last-minute car tuning shop runs.. Say Goodbye to Leak Precision-machined from high quality aluminum, our 8AN push lock fuel line fittings create perfect seals. 360 barbed teeth dig into hose liners, creating a mechanical grip 3X stronger than other push lock fittings.. Hassle-free Installation Just push the hose over the barbed end, the teeth self-guide for perfect alignment, 50 faster than regular AN hose fittings. Included stainless hose clamps grip 2X tighter, no more blown hoses. Ideal for NBR rubber push lock fuel hose.. Exclusive Wrench Protectors Scratched AN fittingsCorrosionWaste fuel system investment. Our AN fittings wrench protector absorb 70 torque stress while protecting anodized fittings surfaces. Only included in BRIFITOR kits. NotesAN wrench is not included in this kit, you can buy it in our store. Versatile Application Our 12 NBR fuel hose line kit only works with rubber hose on hydraulic system, transmission, fuel filter, fuel injection system, oil cooling system, marine fuel line, etc. Not compatible with PTFE or CPE hoses see description for hose requirements.. Notes Our fittings are CNC-machined to exacting standards, rigorously tested to ensure quality within our system. Manufacturing tolerances can vary between brands, you may encounter fitment challenges with third-party components. For optimal performance, recommend to use components from our brand..

Size The thread size of 8an is 34-16 UNF. The ID of spring lock is 38 inch.. Seal The 8an flare efi fitting is sealed at 37 degree angle to avoid leakage.. Parameter Working pressure 1500psi, Temperature range -40F to 176F.. Material Made of aluminum alloy 6061-T6.Spring lock is made of plastic.. Application Widely used in engine fuel rail, ls swap, transmission cooler, return line, fuel sensor, etc..

Size This fitting is 8AN to 12 barb. The thread size of the 8AN end is 34-16 UNF. Application The barb fitting works only with rubber fuel lines. Parameter Maximum working pressure 1,500 PSI. Temperature range -40 to 248. Material The 90-degree fitting is made of 6061-T6 aluminum alloy. Installation This 8AN 90-degree fitting is easy to install. It is recommended to use clamps to enhance sealing.

Size The thread size of the 8AN fitting is 34-16 UNF. It is only compatible with stainless steel braided or nylon braided hoses with an ID of 8AN. Material The fitting is made of 6061-T6 aluminum alloy. The bending part is produced through a forging process. Seal The ORB side of the fitting is sealed with O-rings. Parameter Maximum working pressure 1,500 PSI. Working temperature range -40 to 250 -40 to 121. Application This 8AN 90-degree fitting is widely used in fuel systems, cooling systems, power steering systems, breather systems, and more.

Size 8AN female straight swivel fitting fit for 8AN hose.. Compatibility Only work with stainless braided and nylon braided hose. Not compatible with PTFE and rubber hose.. Application This swivel fitting widely used in fuelwaterfluid airlinegas linebraided fuel lineclutch hose and turbo line etc.. Max Working Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122.. Design and Durability 360 Swivel design for easy assembly. Made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength..

Size Parameter The thread size of 8AN is 34-16 UNF. Max Working Pressure 1500 PSI Temperature Range -40 - 250. Material Built with sturdy 6061-T6 aluminum alloy, the 8AN to 8AN y block is black anodized to be oil, rust, and corrosion-resistant. Sealing The AN side of the AN Y fitting is sealed by a 37-degree angle.. Applicable Medium Includes oil, fuel, coolant, water, air, gas, and more.. Application Split the fluid flow parallelly for any liquid or gas application..

Size The thread size of 8AN is 34-16 UNF.. Sealing The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring.. Material Aluminum alloy 6061-T6.O-ringNBR.. ParameterTemperature range-40F-212F.. Applicability The orb fitting can be compatible with oilfuelwaterfluidair,etc..

Size AN8 34-16UNF male flare, straight. Manufactured from lightweight 6061-T6 aluminum. Anodized finish for strength, durability and anti-corrosion. These bulkhead fittings allow lines to pass safely and securely through firewalls and body panels. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size The fitting has a total length of 45 mm, and the AN8 thread size is 34-16 UNF.. Sealing The AN side of the flare is sealed by a 37 degree angle .. Specifications Maximum working pressure is 1500 PSI. Working temperature range is -40F to 250F.. Material The fitting is made of high-strength 6061-T6 aluminum alloy with an anodized surface.. Application The extender fitting provides different additional lengths. It is widely used in fuel systems, cooling systems, and more..

Compatible withOnly fit for all braided CPE fuel lines and they are NOT work with PTFEE85rubber hose.. Superior QualityThe aluminum alloy hose fitting end is made of lightweight 6061-T6 and coated with black penetrates aluminum,which make the fitting end strong strength anti-corrosion,anti-rust,durability and stay a long service life.They can be reused but need to replace the olive insert.. Reused useThe swivel hose end are easy to install without any complex modification and special equipment.Lube can help prevent any galling and adjustable AN wrench is needed to make the installation easier during the inatallation.The swivel hose can be recycle and reused.. Precision Craftsmanship CNC Machined billet aluminum anodized make the fitting have superior thread strength.37angled leak-free seal and weld-free construction make fluid flow and connection over the hose better.. Widely ApplicationThe swivel hose end fittings can work in the maximum 1000PSI pressure and the working temperature from -65F to 252F-53-122.They are widely used in Fuel OilWater FluidAirline and so on.They are also widely used to connect oil gas line clutch hosebraided fuel lineturbo line and so on..

Package Include4 x 8AN Straight End Fitting.During the installation,the included accessory o-ring is not a must.Whether it can be used or not depends on your own need.Choosing not to use it won't influence the subsequent installation.. Indutrial QualityThe female Straight End AN8 fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength.Max Working Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. Can be suitable for competition applications where reduced weight is needed.. Unique DesignSwivel design for easy assembly,Please select the corresponding wrench to use.4AN-4S wrench 6AN-6S wrench 8AN-8S wrench 10AN-10B wrench.. Wonderful For Universal Use 8AN Straight End Fitting is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our 8AN fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose,rubber hose.. ServiceIf you have questions of our female AN8 fittings,you can contact us.We value your shopping experience and strive to offer a high-quality product and service..

Full Customization in One Kit This 15-piece kit includes 8x 8AN fittings 04590150, 4x fittings adapters, 2x hose clamps and exclusive wrench protectors. Mechanics-approved 92 of jobs completed with just 1 box. No more last-minute car tuning shop runs.. Say Goodbye to Leak CNC-machined from high quality aluminum not cheap cast metal, our 37 sealing angle AN8 hose fittings end create strong seals. Built to withstand high pressure high temperature builds.. Hassle-free Installation The 360 swivel fittings lets you adjust at any angle, making installation quick and effective. Plus, all threads meet SAE specs every adapter screws in smoothly, whether you mix our fittings with other brands.. Exclusive Wrench Protectors Scratched AN fittingsCorrosionWaste fuel system investment. Our AN wrench protector absorb 70 torque stress while protecting anodized fittings surfaces. Only included in BRIFITOR kits.Notes the AN wrench is not included in the kit,you can buy it in our store. Versatile Application Our 8an fuel line fitting kit works with stainless or nylon braided CPE hose on transmission oil cooler, fuel injection, fuel supply, coolant fluid system. Not compatible with PTFE hoses see description for hose requirements.. Notes Our fittings are CNC-machined to exacting standards, rigorously tested to ensure quality within our system. Manufacturing tolerances can vary between brands, you may encounter fitment challenges with third-party components. For optimal performance, recommend to use components from our brand..

AN8 flare 34x16 male thread to 38 inch barb fuel line hose adapters with 2 ptfe spacers. Material High performance light weight 6061-T6 billet aluminium. Black anodized finish for durability, and long last. Fit. such as Oil Fuel Water Fluid Air Line. All our aluminum fittings and adapters are fully compatible with gasoline and alcohol based fuels.

JIC -8 AN x AN8 x 8AN male flare34-16 thread Y block adaptor fittings, black anodized finish. One-piece design is compact and lightweight, high flow capacity, Y-Blocks feature AN Style Male inlets and outlets. Hard anodized coating is compatible with alcohol, exotic fuel-additives, water and oil. This eliminates leaks due to poor solder joints or leaky O-rings due to CNC manufacturing process, 8 AN Male to AN8 Male Coupling Union Adaptor. Made of one-piece lightweight 6061-T6 billet aluminium.

Size Thread size of 8an weld bung is 34-16 UNF.. Material Made of aluminum alloy 6061-T6.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. Parameter Max pressure 1000PSI68.94bar, Operating temperature - 65 to 252.. Note Can not be screwed too tightly when using, otherwise it will deform the 37 degree valve seat and cause leakage..

Size The thread size of 8an is 34-16 UNF.. Seal The AN flare is sealed at a 37 degree angle.. Parameter Max Working Pressure 1500 PSI. Working Temperature Range -65 F to 252 F.. Material Made of aluminum alloy 6061-T6, anodized black surface.. Function The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters..

The thread size of 8AN is 34-16 UNF. The AN side is sealed by a 37 degree angle.. Made of aluminum alloy 6061-T6. The swivel fitting is only work with stainless braided and nylon braided hose.. Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. 360 Swivel design for easy assembly. It can be reused and recycle.. Application The swivel fitting works only with stainless steel braided and nylon braided hoses.

8AN male flare to 8AN flare to 8AN male flare Y block coupling adapters fuel line connector. This eliminates leaks due to poor solder joints or leaky O-rings due to CNC manufacturing process. Y adaptor blocks eliminate the need for additional fittings. CNC-machined, billet aluminum Y-Blocks feature AN Style Male inlets and outlets. Hard-anodized coating is compatible with alcohol, exotic fuel-additives, water and oil.

8AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 6pcs 8an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 8an hose separator clamp,2pcs 8an to 8an Fitting and 8an braided fuel line Length 10 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Specification AN8 FEMALE to AN6 MALE. CNC-machined from 6061-T6 aluminum. Black anodized for great appearance and anti-corrosion. Suitable for most fluids. Removable and reusable.

8an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 10pcs 8an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, and 8an braided fuel line Length 16 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Full Customization in One Kit This 21-piece kit includes 10x 8AN PTFE fittings 04590180, 4x male fittings adapters, 2x 8an hose separator clamps and exclusive wrench protectors Hose Assembly Tool. Mechanics-approved 92 of jobs completed with just 1 box. No more last-minute car tuning shop runs.. Say Goodbye to Leak CNC-machined from high quality aluminum not cheap cast metal, our 37 sealing angle 8AN PTFE fuel line fittings create strong seals. Built to withstand high pressure high temperature builds.. Hassle-free Installation 360 ptfe swivel hose end fittings lets you rotate fittings like a ball joint. All threads meet standard specs, compatible with 95 of AN brands. Unique to us PTFE hose reaming tool ensures fully hose-to-ferrule contact, stopping 80 of leaks caused by DIY hose prep.. Exclusive Wrench Protectors Scratched AN fittingsCorrosionWaste fuel system investment. Our AN Fittings wrench protector absorb 70 torque stress while protecting anodized fittings surfaces. Only included in BRIFITOR kits. Notes AN wrench is not included in this kit, you can buy it in our store. Versatile Application Our 8AN PTFE fuel line kit mostly used in EFI LS system, fuel injection system, transmission system, oil cooler system, turbocharger system, ls engine swap, etc. Compatible with automotive fuels lubricants coolant E85.. Notes Our fittings are CNC-machined to exacting standards, rigorously tested to ensure quality within our system. Manufacturing tolerances can vary between brands, you may encounter fitment challenges with third-party components. For optimal performance, recommend to use components from our brand..

Package Includes 1 x CPE Nylon Braided Line, 2 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 1 x Hose Separator Clamp.. Hose ID 0.43 inch11mm, Hose OD 0.64 inch16.25mm. Length 10 feet. Please measure before purchase.. Made of CPE synthetic rubber and nylon braided. Fittings included are not compatible with PTFE Hose, E85 and Rubber Hose.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Professional Installer is Highly Recommended. Free replacement without return if leak..

All You Need In One Kit The 8an Fuel Line Kit includes 20FT Nylon Braided PTFE Fuel Line and all the necessary fittingadapters for a hassle-free installation, greatly saving your time and budget. Long Lasting Durability The AN8 ptfe fuel line is designed for long-lasting performance resistance to wear and tear. The 8an fittings are made by high quality aluminum, ensuring reliability in high temperature and pressure environment. Special Tool For Ease Of Install Equipped with AN Fitting Wrench and Soft Vise Jaws to prevent scratches while installing the hose fitting onto the ptfe hose. The 8AN Hose Reaming Tool helps you to tidy up the incisions of hose and separate the braided layer from ptfe layer. Versatile Application 8AN PTFE braided hose is adept at handing automotive fuel, such as gasoline,ethanol,E85,oil and coolant. Commonly used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc. Experience excellent performance Whethter you're a enthusiast or professional, upgrading an existing setup or building a custom system, this 8an ptfe fuel line kit offers versatility and adaptability to meet your specific requirements..

Size AN8 34-16UNF female to 38 9.5mm hose barb, 90 Degree. Manufactured from lightweight 6061-T6 billet aluminum. Anodized finish for strength, durability and anti-corrosion. These AN to hose barb fittings are designed for a wide range of automotive applications including fuel, oil or water lines. All fittings and adapters are fully compatible with gasoline and alcohol based fuels.

8AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 10pcs 8an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 8an hose separator clamp, 2pcs 8AN to 14 NPT Fitting, 8an braided fuel line Length 20 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

8AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 6pcs 8an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 8an hose separator clamp, 2pcs 8AN to 14 NPT Fitting, 8an braided fuel line Length 10 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Size The thread size of 8an is 34-16 UNF.. Parameters Working Pressure 1500PSI. Temperature range -40F to 250F.. Ftiing Sealing The AN thread of the flare is sealed by a 37 degree angle.. Manufactured from lightweight 6061-T6 aluminum. Application Widely used in automotive fuel systems, such as carburetors and injectors, as well as fluid systems.

Precision 8AN Size This straight male bulkhead fitting features standard 8AN 34-16UNF male threads on both ends for perfect compatibility. Manufactured from 6061-T6 hard aluminum with a black anodized finish, it delivers excellent corrosion resistance and durability for long-lasting performance in demanding automotive environments.. Leak-Proof 37 Flare Seal This 8AN bulkhead fitting engineered with precise 37 AN flare sealing surfaces to ensure a secure, leak-free connection right out of the box. The deep-cut threads and robust design prevent fuel or fluid leaks, guaranteeing system integrity and safety in high-pressure applications.. Universal Compatibility Our Bulkhead flare fitting is designed for superior performance with a wide range of fluids. Fully compatible with gasoline, alcohol-based fuels including E85, diesel, oil, and coolant systems. Your reliable adapter for fuel, cooling, and air lines in automotive and marine applications.. Secure Bulkhead Design This hard anodized 8AN Fitting is Specially designed to safely and securely pass lines through firewalls, body panels, or chassis. The external hex nut allows for easy wrench installation and a firm, rattle-free mount, ensuring organized and protected fluid lines.. High-Pressure Rated The 8AN bulkhead adapter is rigorously tested to perform reliably under extreme conditions. With a maximum working pressure of 1000 PSI and an operating temperature range from -60F to 250F, this adapter handles the demands of high-performance and racing applications with ease..

8an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 6pcs 8an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree and 8an braided fuel line Length 12 Feet. Hose ID 0.41. Hose OD 0.65inch.. 8an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Wide Applications8AN Male Block off Cap universal application for Diesel, E85, Water,Air Line.Accessories can be used either temporarily or permanently. Cap block off are 100 reusable. High Quality MaterialThe Block off Cap is made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. High PerformanceMaximum pressure of the fitting is 1000psi 68.94bar and the working temperature range is -65 F to 252 F,O-ring can withstand temperature 122F-140F. Size The thread size of the AN8 hex thread plug fitting is 34-16 UNF. Quality ServiceWe provide a Two-month Return ServiceWhen You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You.

Size PTFE 8an fuel hose ID 1332 0.39 inch. OD 0.55 inch. Length 20ft6 m. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Material Made of aluminum alloy 6061-T6.. Application The swivel fitting is only work with stainless braided and nylon braided hose.. Size The thread size of 8AN is 34-16 UNF. The AN side is sealed by a 37 degree angle. Straight 0 Degree. Parameter Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. Feature 360 Swivel design for easy assembly. It can be reused and recycle..

Package Included 2PCS 8AN 90 Degree Swivel Hose End Fittings.. Thread size of 8AN 34-16 UNF. The AN side is sealed by a 37 degree angle.. Material 6061-T6 aluminum alloy.. Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. Compatible with nylon braided CPE fuel hose. Not for PTFE hose, E85, rubber hose..

Package include 2pcs 8AN 90 Degree Push Lock Hose Fitting. 8AN to 12 inch barb. Thread size of 8an 34-16UNF. The barb fitting only work with rubber fuel line. Material 6061-T6 aluminum alloy. Working pressure 1500PSI. Temperature range -40 to 248. Easy to install. It is recommended to use clamps to enhance sealing.

Package Included 2PCS 8AN to 8AN Male Flare Coupling Union Adapter. Thread size of 8AN male coupler 34-16 UNF, can use to splice or extend a line, works with female thread fitting.. Work temperature -65 to 252 degree F. Max pressure 1500PSI. Ultimate torque 45N.. Works with swivel fitting, push lock fitting and female AN fittings. Please match the correct size.. For fuel system, such as fuel hose extend, line connect to fuel filter, fuel pump and cooler system..

Wide Range Of UsesThe fitting can be used with fuel, oil, gas, fluid, water, air line. 90 degree adapter fitting can allow for the connection of hose ends to other components like oil pumps, fuel pumps and fuel filters.. Specific ParametersFemale AN8 to male AN8 34-16 UNF thread pipe connectors,Max Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122.. High-Quality Material Anodized FinishThese fitting are made of high-quality aluminum alloy material for strong strength. Anodized and hand polished finish add the final touch of quality and protection. Black anodized for great appearance and anti-corrosion, superior thread strength.. 360Swivel DesignThe swivel 360 elbow design allows you to get things reasonable tight while still maintaining the swivel functionality so that you can ensure a proper connection and positioning before doing that final tightening down to lock everything into position.The swivel fitting has 37-degree AN sealing angle design assures leak free performance.. Quality ServiceWe provide a Two-month Return ServiceWhen You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You..

Size The thread size of 8an is 34-16 UNF.. Parameter Max Working Pressure 4000PSI Working Temperature Range -65 to 252.. Material Aluminum alloy 6061-T6, anodized black surface.. Sealing The AN side of the flare is sealed by a 37 degree angle.. Feature Split flow at 60 angle, ideal for any liquid or gas application requiring a high flow separator..

TipsTo obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage.. 37 Degree Flare Fitting TaperThe 8an male flare to 38 NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37 AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free. Application-8AN to 38 NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boatmarine, etc. The male flare fitting fit all oil cooler fuel tank fuel pumpfluid Lineturbo.. Material FeaturesMade of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized finish for corrosion protection. Features anti-rust, waterproof, oil-proof.. Six-month warranty provides by SINTLY. If you have any questions, please contact us. NO INSTALLATION INSTRUCTIONS, Adjustable wrench is highly recommended..