ApplicationCompatible with Volvo engine 2007-2016 D16 VHD, VNL, VNM, VNX, VT D13 VNM, VNL, VHD D11 VHD, VNL, VNM For Mack Engine 2008-2020 Conical Injector SleeveMP7-MP8 MRU, LEU, CXU, CHU, GU, CV, CTP, CT. Nice FunctionThis tool kit is used for the removal and installation of brass cups 21098621, 3183368, 85104134, 85124276 on mack truck engines. Replaces OEM number 9986174, 88800387, 9998254. Premium MaterialMachined from heavy duty carbon steel, this injector remover kit with a fine textured black powdercoat finish ensures a lengthy lifespan for cups removal and installation. Easy UseAn expanded collet design allows the sleeve to be gripped from above and attached to the puller force screw, so the injector sleeve of the copper unit can be extracted from the top of the cylinder head.

FITMENT Compatible with Detroit Diesel Mercedes Benz Trucks DD13, DD15, and DD16. REPLACEMENT Alternative to OEM J47388-A and W470589000700 MH064002. QUALITY High standard heavy duty hard steel with black oxidation treatment, great strength, durable and corrosion resistant, not easy to deform, with long service life. DESIGN Easy to remove and replace the injector cups tube nozzle, saving your time. Jaws will hold the cup from the bottom, while the O rings provide assistance on the side as you unscrew the cup from the top. NOTE Remember to drain the coolant before removing the injector cups.

FITMENT Compatible with 3126B CAT HUEI injectors 10R-0781, compatible with Caterpillar Marine Model 3126 3216B, compatible with CAT C7 C9. NOT work on a CAT 3126 engine 12 valve head.. MATERIAL The CAT 3126 injector sleeve cup removal tool is made of high standard high-speed steel cone and rubber, strong and sturdy, anti-rust and anti-corrosion, with a long service life.. FUNCTION This C7 injector cup tool will stay sharp after hundreds of uses. Easy to operate, the job can be done with the cylinder heads on, saving your time.. FEATURES Small enough to allow you to replace hard-to-reach cups at the rear of the engine.. PACKAGE INCLUDES 1PCS Fuel Injector Sleeve Installer, 1PCS Fuel Injector Sleeve Remover, 6PCS Injector Cup, 6PCS O rings..

Upgraded Design We have made a total upgrade for the design also, the installer shrank is a whole piece and much more thicker. The big support cup made it more easy to use.. Upgraded Stainless Steel Material The whole body of the removal tool was made by stainless steel,not as other common tools combined stainless steel with aluminum alloy together, this model totally solved the problem of tool broken inside of the injector cup.. Wide UsageThis Injector Sleeve Cup Removal Installation Tool Kit can be used for Ford E-Series 7.3L 1994-2003 for Ford F-Series 7.3L 1994-2003 for Ford Excursion 7.3L 1994-2003 for Ford Powerstroke 7.3L 1994-2003 for Navistar T444E, DT466E 1994-2003.. Related Part NoF4TZ9F538A, 1814376C1, 1833564C92, T444E, WT73PD, ZTSE4303, XC3Z-9229-AB, F4TZ9F538A-G, 1833564C91, 1823492C97, XC3Z9229AB, CM-5010, 1833564C92.. Package Included 1x Fuel Injector Sleeve Installer, 1x Fuel Injector Sleeve Remover, 1 Hex Wrench..

Great Compatibility fits for Detroit Diesel Mercedes Benz Trucks DD13, DD15, and DD16.. Superior Quality Premium grade heavy duty hard steel with black oxide finished, durability, strong and anti-corrosion. High precision and hardness to provide a much longer service life.. Upgrade Design This tool is used to remove and replace the injector cups tube nozzle and works in an easier way to save your time and money.. Easy Work Directly replaces OEM Part W470589000700, MH064002 and J-47388-A.. 100 Satisfaction Guarantee If you're not 100 satisfied with our items, simply return it for refund within 30 days. Support 12-month Warranty. Professional Sincere Service allows you to take no risks to purchase in E-cowlboy.

Yuesstloo Fuel Injector Removal Tool is used to pull injector and remove injector.. The injector puller is compatible with BMW N14 N18 N20 N26 N53 N54 N55 N63 S63 engine.. Easy to operate. Just use the puller connection fuel injector, and pull the slide hammer, you can remove the injector easily, make the job effective.. Made of high-quality material, with high hardness, strong and not easy to break.. All items will be checked carefully and packaged in good condition. If there is some problem with our products, you can get help from us..

Applicability9U-6891 Injector Sleeve Cup Remover Installer Kit Engineered Compatible with CAT C-10,C-12,C-15,C-16,C-18,3406E engines, convenient to save time and repair costs.. FunctionThe 9U-6891 Injector Sleeve Cup Remover Installer Tool Set was designed to Install and Remove Injector Sleeves 9u-6891 injector sleeve cup remover installer. MaterialMade of hight qualitysturdy steel, super corrosion and rust resistant.. Packeting1x Puller Bridge,1x Driver Cap,1x Puller Stud,1x Thrust Bearing,1x Hard Washer,1x Nut.

Great Compatibility Works on Caterpillar CAT C-10,C-12,C-15,C-16,C-18 and 3406E Engines. The new puller bridge can be used on all three engines. Superior Quality Advanced heavy duty steel process, durability, anti-corrosion, high precision and hardness to provide a much longer service life.. Benefits Used to install and remove injector sleeves. Works in a easier way to save your time and money.. Includes 6 Tools 9U6877 Thrust Bearing 9U7258 Driver Cap 221-9778 Puller Stud 4K-0367 Nut - Full 5P-8247 Hard Washer 128-7889 Puller Bridge.. 100 Satisfaction Guarantee If you're not 100 satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional Sincere Service allows you to take no risks to purchase in E-cowlboy.

Extract Stuck Injectors in Seconds No Sweat 23-piece pneumatic kit removes seized diesel injectors effortlessly with air-powered hammering 5-8 bars. Includes 19 adapters, air hose, and EUUS connectors to tackle stubborn jobs fastno muscle strain or part damage.. Every Adapter Youll Ever Need Guaranteed Fit Covering M8x1.0 to M31x0.75 threads, our 19 precision-sized adapters fit 99 of diesel injectors.. Universal Kit for American Euro Rides. Two system connectors 19 adapters Total compatibility. Compatible With Chevy, Compatible With Dodge, Compatible With Mercedes, or Compatible With VW diesels with one compact kit. Perfect for home garages or shops serving diverse vehicle fleets.. Fast, Safe Labor-Saving Powerhouse. Ditch risky hammers or manual tools Connect to your air compressor for rapid, controlled extraction. Protects engine parts while slashing repair time by 50ideal for pros and DIYers tackling tight deadlines.. Heavy-Duty Steel Built to Outlast Your Truck. Forged from AISI 1045 steel with anti-corrosion finish, this puller survives grease, grit, and daily abuse. Toolbox labels keep your workspace organizedno more fumbling mid-repair.

FITMENT Works on most HEUI injectors Compatible with 1994 - 2003 7.3L Ford, HEUI injectors. REPLACEMENT This fuel injector rebuild kit contains everything required to rebuild all 8 injectors for HEUI injectors. Kit includes washers .002 .004, DPS0010 screws, IP15 Torx, T10 Torx, feeler gauge .002 .004, Fuel Injector O-Ring Seal Kit, Vise Clamp and stainless Steel Back up Rings as pictured. Easy to fix HARD TO START issue when cold without removing the injectors. DIRECT REPLACEMENT Replace for DT466E, I530, 1833564C92, DP0008, DP0007, DP0010, DP0014 MY1401 DPS0014. FUNCTION Kit includes stainless- steel washers solenoid spacer shims. If the clearance between your armature plate and adapter plate is causing cold start issues, you can install the washers to increase the clearance back to .004 to .005 like new injectors. Placed solenoid shims under all four corners of the solenoid for a total of .005, to increase the Solenoid to armature clearance to near factory specs, when solenoid is energized. MATERIAL Premium material used on this kit to protect them from all the dirt, oil that could potentially break down the tool performance. Corrosion-resistant, wear-resistant, and rust-resistant.

Function Fuel Injector Install Remove Tool is designed to install and remove the injector for N20 N55 engines. ApplicationFuel injector install tool compatible with BMW N20, and new N55 engine, BM number 130320. But this injector does not fit the old N55 engine. Excellent qualityMade of heavy duty hard thick steel with black oxide coating on the surface, which effectively prevents oxidation and rust, and maintains stable performance during long-term use. InstallationBefore installing or removing the injectors, you must first install the tool evenly. The tool may not tighten completely, so you must first make sure everything is tightened before using the tool. TipsWhen you are unsure how to install, it is best to search for a video online. Doing it incorrectly may damage your engine or fuel injectors.

Save Time and Money -This Job Can Be Done with The Cylinder Heads On. Small - Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine. High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available. It Will Stay Sharp and You Can Use This Tool Hundreds of Times. Comes with Tools and Sleeves.

Great Compatibility Fit for Caterpillar CAT 3406E C-15 C-16. Essential tool kit for engine operation to save your time and money. Superior Quality Advanced precision machined out of aircraft grade billet aluminum and heavy duty steel process, durability, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life.. Benefits Used to install and remove injector sleeves. Easily Precisely adjust the Injector Height of the engine and easy to rotate the engine.. Include 8 Tools 9U6877 Thrust Bearing 9U7258 Driver Cap 221-9778 Puller Stud 4K-0367 Nut - Full 5P-8247 Hard Washer 128-7889 Puller Bridge 9U-7227 Injector Height Tool J-38587-A Engine Barring Socket.. 100 Satisfaction Guarantee If you're not 100 satisfied with our items, simply return it for refund within 30 days. Support 12-month Warranty. Professional Sincere Service allows you to take no risks to purchase in E-cowlboy.

MaterialManufactured from high quality steel for strength and Durability. Alltooetools Fuel injector removal puller have Knurled rings for use in Oily and Greasy conditions.. ApplicableAlltooetools fuel injector removal puller is designed for the removal of FSI type injectors compatible with Volkswagen, compatible with Seat, compatible with Skoda.. SuitableAlltooetools fuel injector removal puller is compatible with Volkswagen, compatible with Seat, compatible with Skoda VW, covering 1.4, 1.6, 1.8, 2.0, 2.7, V6, 3.0, V6, 3.2 V6, 3.6 V6 and 4.2 V8 FSI engines.. Packing Comes within a blow moulded case.. Attention This tool Compatible with most models. Some number of models may not be compatible. Before placing your order, please check your vehicle's detailed specifications and owner's manual to avoid purchasing the wrong item..

Fit onInjector Removal Tool Works on most of 6.7L Powerstroke Diesel Including 2011 - 2018 F-250 F-350 F-450 F-550. Fuel Injector Socket Set perfect fits for Ford PowerStroke 6.7L Diesel Injector.. Fuel Injector Removal ToolDesigned to assist to remove the injectors from the cylinder head without causing any damage to the injector body.. Fuel Injector Socket This 17 mm 12 point flare nut socket and deep crows foot gives the technician the ability to remove various injector lines without breaking and damaging the electrical connections.. Premium MaterialThis tool is made of heavy-duty steel,which is impacts resistance, excellent sturdiness, and durability. It has excellent rust and corrosion-proof, which can ensure long-term trouble-free use.. Satisfaction GuaranteeWe are dedicated to delivering professional and heartfelt service to enhance your shopping experience. If you're not completely satisfied with your purchase, simply return it within 30 days. Additionally, we offer a 12-month warranty for your peace of mind..

Vehicle Fitment Designed for Ford 1994-2003 7.3 Powerstroke for Navistar T444E DT466E for Caterpillar 3126 3126B 3126E Diesel Engines F-Series E-Series Excursion. OE Replacement Injector Cup Number F4TZ-9F538-A, 1814376C1, F4TZ9F538A Injector O-rings Number XC3A-9229-AB, XC3Z9229AB, CM5010, 1833564C92, 1823492C97, F8TZ9229AA, 1833564C91. High-Quality Material Our Injector Sleeve Cup Installation Removal Tool Kit from durable materials to withstand extreme heat and other harsh conditions. Easy Installation With straightforward instructions and a user-friendly design, this kit allows for a smooth and effortless installation process, saving you time and effort. After-sale Service Enjoy 30-day return and 12-month warranty, making your purchase completely risk-free.

High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available. This Job Can Be Done with The Cylinder Heads On, Works Great. Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine. It Will Stay Sharp and You Can Use This Tool Hundreds of Times. Replace Part Number Injector Cup OEM Number F4TZ9F538A, 1814376C1, F4TZ-9F538-A Injector O-rings OEM Number XC3Z9229AB, XC3A-9229-AB, 1833564C92, 1823492C97, F8TZ9229AA, 1833564C91, CM5010. Injector Sleeve Cup Removal Installation Tool Kit Fitment Replacement For Ford E-Series 7.3L 1994-2003 Replacement For Ford F-Series 7.3L 1994-2003 Replacement For Ford Excursion 7.3L 1994-2003 Replacement For Ford Powerstroke 7.3L 1994-2003 Replacement For Ford Navistar T444E, DT466E 1994-2003 Replacement For Ford Caterpillar 3126, 3126B, 3126E Diesel Engines 1994-2003. Package Include 1x Fuel Injector Sleeve Installer, 1x Fuel Injector Sleeve Remover, 8x Injector Cup Sleeve Plug, 8x F4TZ-9F538-A Sleeve, 8x Injector O-Ring Kit, 2x Brushes. Easy to Install The injector tool helps in installing the injector cups,and does not damage the cup in the process.

Effortless Injector Removal Orion Motor Tech's 23-piece pneumatic injector puller kit lets you effortlessly extract seized injectors from a wide array of diesel engines. Includes a hammer, 19 adapters of various sizes, an air hose, and EU US connectors. Any Adapter Size You Need M20x1.0, M18x0.75, M17x1.0, M8x1.25, M8x1.0, M10x1.5, M14x1.5, M16x1.5, M18x1.5, M22x1.5, M12x1.5, M31x0.75, M26x0.75, M27x0.75, M29x1.0, M25x0.5, M27x1.0, M25x1.0. Save Time Effort Connect this pneumatic injector puller to an air supply and let it hammer injectors free at 5-8 bars without damaging surrounding parts. Avoid the risks of inertia hammers or mechanical extractors while reducing time and labor. Universal Compatibility With 2 connectors for European and American systems and 19 different-sized adapters, this pneumatic injector puller kit gives you the flexibility to service a wide range of diesel vehicles. Durable Convenient to Use Crafted from AISI 1045 steel with a black finish, this pneumatic diesel injector puller is built to last. Clear size markings on the toolbox and adapters make identification and organization a breeze.

Fit for 2001 2020 GM 6.6L Duramax Diesel.. Built to provide exceptional levels of durability. Enable the technician to remove the tube assembly and replace the o-rings as needed to ensure a good seal.. Removes injector tubes for service and re-installs.. Manufactured utilizing the highest quality materials.. Package 1Injector Tube Tools Kit. Having any questions, contact to us and got an ideal reply within 24 hours..

GM245 Fuel Injector Seals ToolsFits for GM 2.0L 3.6L engines with Hitachi fuel injectors 2010-2017 and 2.0L, 2.5L, 5.3L 6.2L engines with Bosch, Fits for Continental Delphi fuel injectors 2012-2017 and compatible with Subaru 2014-2019 2.0L2.4L turbo engines.. 6706 Injector Rail Assembly RemoverFits for 2007 - 2014 General Motors Cadillac Saturn Pontiac Chevrolet direct injection engines. Application for 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4. Note If you are working on a 5.3L or 6.2L you will need a quantity of 2 sets.. High Performance GM245 Fuel Injector Seals Tool comparable to EN-49245, EN-51105 and 18683AA000, used for replacing the fuel injector teflon seals without damage or leakage. 6706 Injector Rail Assembly Remover Tool replaces for EN-49248, used to evenly loosen the seat rings of all injectors and properly remove the direct injection fuel rail without damaging the injectors, cylinder head and rail mount assemblies.. Superior MaterialMade of highest quality Steel for great strength, prevent corrosion and rust, impact resistance, sturdy and durable. High precision and hardness ensure reliable long-term service.. 100 Satisfaction GuaranteeIf you're not satisfied with this tools Set, simply return it for getting refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo.

FITMENT This 6.7L Fuel Injector Removal Tool is compatible with F-250 F-350 F-450 F-550 6.7L Powerstroke Diesel 2011 2012 2013 2014 2015 2016 2017 2018. MATERIAL Made of heavy-duty steel with black coating on the surface, strong and durable, high hardness, good toughness, anti-rust and anti-corrosion. FUNCTION This 3418 injector puller can assist in removing the injector from the cylinder head without damaging the injector and surrounding components. EASY USE First remove the original bolts and crab slides, then install the remover to sit into the injector. Screw the long bolt into remover, put and screw the short bolt into remover. Finally after force screwing the short bolt into the remover, the injector will be free and can be take out from diesel. TIPS FOR USE Pre-soaking the injector in penetrating oil before removal can improve disassembly efficiency and reduce component damage, ensuring a smoother disassembly process.

Great Compatibility Fit for Ford 4.5L LCF 6.0L 6.4L 6.7L 7.3L Powerstroke For Caterpillar 3126 C7 C9 For Navistar T444E DT466 VT365 VT275 For MaxxForce 57DT910N9N10 For GM For Chevrolet 6.6L For Dodge Cummins 5.9L 6.7L For John Deere 4.5L 6.8L 8.1L 9.0L HPCR For Isuzu 4HK1 6HK1 HPCR.. Superior Quality Premium grade wear-resistant stainless steel, durability, anti-corrosion and never rust. Comfortable ABS plastic handle to keep stable and safe. Provides a much longer service life.. Upgrade Design Removing carbon deposits, rust, dirt and other debris from injector seats, bores, and cups without damage. Surfaces are cleaned and polished to insure good seating and sealing. Make the job easier to save your time and money.. Special Features Includes 1Stainless Steel Spiral Tube Brush and 1Stainless Steel Flat Bottom Brush. This complete injector brush kit should be a necessity for anyone pulling and swapping injectors.. 100 Satisfaction Guarantee If you're not 100 satisfied with our brush, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional Sincere Service allows you to take no risks to purchase in E-cowlboy.

Superior Quality Premium grade wear-resistant stainless steel, high strength and toughness, anti-corrosion and never rust. Comfortable ABS plastic handle to keep stable and safe. Provide a much longer service life.. Upgrade Design Removing carbon deposits, rust, dirt and other debris from injector seats, bores, and cups without damage. Surfaces are cleaned and polished to insure good seating and sealing. Make the job easier to save your time and money.. Includes 1x Stainless Steel Spiral Tube Brush and 1x Stainless Steel Flat Bottom Brush. This complete injector brush kit should be a necessity for anyone pulling and swapping injectors.. Cleaning carbon deposits and dirt out of injector seats, bores, and cups without damage, this brush kit makes cleaning easier and prolong the life of your injector sleeve. Compatibility Works on 4.5L LCF 6.0L 6.4L 6.7L and 7.3L Powerstroke CaterpillarCAT 3126 C7 C9 Navistar T444E DT466 VT365 VT275 MaxxForce 57DT910N9N10 GM Chevrolet 6.6L Dodge Cummins 5.9L 6.7L fit for John Deere 4.5L 6.8L 8.1L 9.0L HPCR Isuzu 4HK1 6HK1 HPCR..

630 Stainless Steel The ICP injection control pressure sensor install removal socket is made of 630 stainless steel, which has high hardness and good corrosion-resistance performance.. Heat TreatmentThe ICP injection control pressure sensor install removal socket tool undergoes heat treatment, which increase the hardness, not easy to break to extend the service life.. Usage with a 38 or 19mm open-end wrench, you can easily disassemble the F6TZ-9F838-A ICP sensor and SW5267 low pressure oil switch.. Replace Part Number 1807329C92, 1807329C91, 1807329, F6TZ-9F838-A, F4TZ-9F838-A, F6TZ9F838A, F4TZ9F838A, 1807329CP2.. Compatible with Ford E-350E-350 Super Duty 7.3L 1997-2003 Econoline Super Duty 7.3L 1997-1999 Excursion 7.3L 2000-2003 F Super Duty 7.3L 1997 F-350 7.3L 1997 F-250 Super Duty 7.3L 1999-2003 F-350 Super Duty 7.3L 1999-2003 F-450 Super Duty 7.3L 1999-2003 F-550 Super Duty 7.3L 1999-200. Package Included 1 ICP injection control pressure sensor install removal sockt..

FITMENT -- 7222 Injector Tube Remover fits for GM 6.6L Duramax Diesel, 2001-2021. 6778 Injector Puller for GM Duramax 6.6L engines 2001-2004. 6779 Injector Puller for GM Duramax 6.6L engines 2005-2011.. REPLACEMENT -- 7222 Injector Tube Remover is the same as J-45910 in function and performance. 6778 Injector Puller similar to J-46594. 6779 similar to J-46594. For a simple repair or the most complex drivability concern, 6778 6779 Injector Puller and 7222 Injector Tube RemoverInstaller Tools solve problems faster, and at better value.. FUNCTION --7222 Injector Tube Remover specially designed to remove the injector tube for maintenance and reinstallation. 6778 6779 Injector Puller used to safely pull the injector from the cylinder head without pulling the injector cup.. MATERIAL -- All parts made of steel with solid and sturdy, surface black coated to ensure resistance to corrosion and rust, protection, years of trouble-free use and continue to perform as designed.. GUARANTEE -- Aiming to give our customers the best products and services, we provide friendly 1-years warranty support and easy-to-reach Customer Service to make sure your investment.

Application Work on 3126B Cat HUEI injectors 10R-0781, Caterpillar Marine Model 3126 3216B, Cat C7 C9.NOTE will not work on a cat 3126 engine 12 valve head.. Nice Design -- Small enough to enable you to change even the hard to get at cups at the rear of the engine.. Save Time and Money-- The job can be done with the cylinder heads on. It will stay sharp after a long term service.. Superior Quality -- Come with tools and sleeves. High speed steel tap used in the removal tool is the highest quality available, resisting rust and corrosion, ensure an unparalleled long lifespan..

ApplicationC7 Injector sleeve cup removal installation tool is suitable for 3126B Cat HUEI injectors 10R-0781, fit for Caterpillar Marine Model 3126 3216B, for Cat C7 C9.. Superior QualityThe high-speed steel cone used in the disassembly tool is of the highest quality currently available, with anti-rust and anti-corrosion effects, ensuring an unparalleled long life.. Package Includes1x for Caterpillar Cat C7 C9 Fuel Injector Sleeve Installer 1x for Caterpillar Cat C7 C9 Fuel Injector Sleeve Remover 6x for Caterpillar Cat C7 C9 Injector Cup 12x Orings.. Advantage3126 injector cup tool will still stay sharp after using this tool hundreds of times. Easy to use, just open the cylinder head to complete this job, saving you time and money.. Nice DesignC7 C9 Injector Sleeve Cup Removal Installation Tool with Parts Kit is small enough to enable you to change even the hard to get at cups at the rear of the engine..

Application Fit for 3126B Cat HUEI injectors 10R-0781, for Caterpillar Marine Model 3126 3216B, for Cat C7 C9. Material Made of the highest quality high-speed steel at present, anti-rust, anti-corrosion and long service life, and remains sharp after hundreds of uses. Feature The injector sleeve cup removal and installation tool is small enough to even allow you to replace hard-to-reach cups at the rear of the engine. easy to use, just open the cylinder head to get the job done, saving you time and money. Package Includes 1 x fuel injector sleeve installer in-vehicle alternative, 1 x fuel injector sleeve remover in-vehicle alternative, 6 x injector cup, 12 x orings. Customer Supports We offer lifetime technical support and 1-year limited warranty for quality-related issues since the date of purchase. Please feel free to contact us if you have any questions.

Fitmentfor Ford 7.3L Powerstroke 1994-2003 for Navistar T444E, DT466E Diesel Engines for Caterpillar 3126,3126B,3126E Diesel Engines. A Must Havefor any shop working on Powerstroke 7.3L Engines. This Fuel Injector Sleeve Tool helps with the removal and installation of the injector cups without damaging the cup in the process.. Replace for Injector O-rings NumberXC3Z-9229-AB, XC3Z9229AA, CM-5010, 1833564C92, 1833564C91, 1823492C97. Replace for Injector Cup Number F4TZ-9F538-A, F4TZ9F538A, 1814376C1. Package Contents1x Fuel Injector Sleeve Installer, 1x Fuel Injector Sleeve Remover In-Vehicle Alternative, 8 x F4TZ-9F538-A Sleeve, 48x Injector O-Ring and Seal.

Compatible with Ford 4.5L LCF 6.0L 6.4L 6.7L and 7.3L Powerstroke, CaterpillarCAT 3126 C7 C9 , Navistar T444E DT466 VT365 VT275 , MaxxForce 57DT910N9N10 ,GM , Chevrolet 6.6L , Dodge Cummins 5.9L 6.7L , 4.5L 6.8L 8.1L 9.0L HPCR , Isuzu 4HK1 6HK1 HPCR.. Material Constructed with high standard Steel Wire and PVC coated handle, practical and durable in use.Provides a much longer service life.. Cleaning carbon deposits , rust , dirt out of injector seats, bores, and cups without damage, Make the job easier to save your time.. This complete injector brush kit should be a necessity for anyone pulling and swapping injectors. Replacement alternative to 3252 AP0083 AP0084 AP0085. Package included 1pcs Spiral Tube Brush ,1pcs Flat Bottom Brush . 100 Satisfaction service If you're not 100 satisfied with our PRODUCTS, simply return it for a full refund in 30 days. Professional AND Sincere Service allows you to take no risks to purchase.Thank you..

VEHICLE FITMENT-The SMMS Injector Sleeve Cup Removal Install Tool is compatiable with Ford F-Series E-Series Powerstroke 7.3L 1994-2003. OE NUMBER-F4TZ9F538A, F4TZ-9F538-A, 1814376C1, 1833564C91, XC3Z9229AB, XC3Z-9229-AB, 1833564C92, 1823492C97. Please check your model. Any questions can ask for us before buying. FUNCTIONS-The tool kit safely removes and reinstalls injector sleeves in the engine's cylinder head, protecting them from damage and ensuring proper sealing. Proper installation prevents coolant leaks into the combustion chamber. HIGH-QUALITY MATERIALS-The tool kit is typically made from high-strength steel, often coated with a corrosion-resistant finish to protect against rust and corrosion. The steel provides the durability needed to meet the demands of automotive work. SERVICE - If you're not completely satisfied with the SMMS Injector Sleeve Cup Removal Install Tool Kit, you can return it within 30 days. You also enjoy a 12-month warranty, making your purchase completely risk-free.

Injector Sleeve Cup Installation Remover Tool Kit.. Compatible With Injector Sleeve Cup Installation Remover Tool Kit Replace for 1994-2003 F250 F350 F450 F550 E250 E350 E450 ESD FSD 7.3L. Package Including 1x fuel injector sleeve installation tool, 1x fuel injector sleeve remover tool, 1x Brush kit for Cleaning the Cylinder Head Sleeve cavity, 8x fuel injector sleeve cup, 48x injector seal and ring kit.. Premium Quality Made of high-quality material, which is not easy to damage, wear-resistant and corrosion-resistant, high reliability, stable performance, sturdy and durable, long service life.. When you receive the product, please check if the product is in good condition and check if the product matches the one you choose. Compared with other similar products, our products have higher performance and you can use them with confidence to bring a perfect shopping experience..

Master Engine CompatibilitySpecifically engineered for Ford 6.7L Powerstroke, Dodge Cummins 5.9L6.7L, and Chevy GMC Duramax diesel engines. This professional kit covers 99 of Common Rail injectors, providing a precision fit for Bosch, Delphi, Denso, and Siemens systems without the need for additional individual tools.. Powerful Seized RemovalStop struggling with manual slide hammers. Our Air Vibration Technology utilizes 5-8 Bar 72-116 PSI pneumatic force to break down heavy carbon buildup and rust. Easily extracts the most stubborn, seized, or stuck injectors from the cylinder head, drastically reducing repair time for professional mechanics.. 19 Precision Adapters HooksIncludes a comprehensive set of 19 adapters M14, M16, M17, M18, M20, M22, M25, M27, M29, M31 and 3 unique prolongation hooks 12mm, 13.5mm, 16mm. These extension tools are designed for injectors tucked deep in the engine bay, ensuring you have the exact match for every specialized diesel repair job.. Industrial Grade DurabilityCrafted from High-Strength S45C Carbon Steel with advanced heat treatment for maximum torque and impact resistance. Every component undergoes rigorous quality testing to ensure the threads won't strip under high pressure. Built for Heavy-Duty daily use in professional garages and industrial environments.. Complete B2B Repair SolutionThis all-in-one kit includes a flexible extension hose and a heavy-duty blow-molded case for organized storage. Perfect for B2B professional shops looking for a reliable, cost-effective alternative to expensive OEM tools. Backed by expert technical support to ensure 100 compatibility with your specific engine code..

Special designed for cleaning and re-cutting injector seats on common rail diesel engines.. 15X19mm flat reamer for universal injector. 17X17mm flat reamer for DelphiBosch injectorBMW, Ranult, Ford. 17X19mm flat reamer for Bosch injectorBENZ. 17X21mm angle reamer for FIAT, Iveco. Coming with carrying case, you can easily organize every piece of this set in an orderly manner, ready for your next job. The kit can also be protected during storage to avoid damage or loss..

Replacement for 1994-2003 F-Series 7.3L, 1994-2003 E-Series 7.3L, 1994-2003 Powerstroke 7.3L. Part numbers XC3Z9229AB, F4TZ-9F538-A, 1833564C91, E541-73TK, CM-5010. Simple work Can get the job done with the cylinder head open, works great. Material Set of injector socket tool is made of high quality steel, very sturdy, suitable for long-term use. Good durability Steel cone in removal tool for good durability, there are no hardened threads on the removal tools on the market, these tools are often too dull to get the job done.

Top Quality Injector Sleeve Cup Removal Installation Tool Kit Well-machined, strictly tested before packing, made of sturdy, tough prime materials that Car enhanced durability and superior reliability.. MPN Replace for OE Part Number F4TZ9F538A,1814376C1,1833564C92,1833564C91,1823492C97,F8TZ9229AA,XC3Z9229AB. FitmentReplace for 1994-2003 Ford Powerstroke 7.3L,Navistar T444E,DT466E and Caterpillar 3126,3126B,3126E Diesel Engines 1994-2003 Ford F-Series 7.3L, 1994-2003 Ford E-Series 7.3L, 1994-2003 Ford Excursion7.3L. Package Including 1x fuel injector sleeve installer tool, 1x fuel injector sleeve remover tool, 8x fuel injector sleeve cup, 48x injector seal and ring kit.. Other Tools on the market Do Not Have Hardened Threads on Their Removal Tool, These Tools Often Are Too Dull to Finish the Job. This Job Can Be Done with The Cylinder Heads On, Works Great.Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine. High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available It Will Stay Sharp and You Can Use This Tool Hundreds of Times. Please do match the OEM Code and the fitment, Directly Fit.

Material - Tool is made of durable materials, stable characteristics, professional performance and high reliability not easy to damage. Part Number - 931-308,931308,F81Z-9C968-AB,CM5013. Application - IPR valve removal tool Replacement for Ford E350 E450 E550 F350 F450 F550 F59 Diesel 7.3L. Package Including - 1 x IPR valve removal tool. Note - Make sure the product matches your car before buying so you can have a better shopping experience.

Application Replacement for Ford 1994-2003 E-Series F-Series Excursion 7.3L. Material Tool is made of durable materials, stable characteristics, professional performance and high reliability not easy to damage. Part Number replacement for XC3Z9229AB, CM-5010, 833564C92, XC3Z-9229-AB, 1814376C1, F4TZ-9F538-A, E541-73TK T444E, F4TZ9F538A, DT466E, 3126, 3126B, 3126E, 1833564C91, 823492C97. Package includes 1 x Injector sleeve cup removal tool, 1 x install tool. Note Make sure the product matches your car before buying so you can have a better shopping experience.

COMPATIBLE This fuel injector cup tool works on 3126 engines with electronic fuel injection HEUI and for Caterpillar 3126B engines with electronic fuel injection HEUI. This will NOT work on engines with mechanical injection MEUI.. FUNCTION The tool used to remove and install the fuel injector sleeve cup at the engine. The tool is small enough to enable you to change even the hard to get at cups at the rear of the engine.. PACKAGE INCLUDE 1 PCS Fuel Injector Sleeve Cup In-Vehicle Remover for 7.3L Powerstroke 3126 3126B C7 C9 Cat, 1 PCS 3126 Fuel Injector Sleeve Cup Installer, 1 PCS Bright Taper Pipe Tap, 6 PCS Rubber Cup Plugs for C7 3126 3126B Injector Cups 227-1200 227-2911. Replace for OEM ST-177, ST-179B, EM501611.. MATERIAL The fuel injector cup remover installer tool is made of heavy-duty steel structure machined and finished with powder coating to resist corrosion and ensure a long-term and reliable performance.. Satisfaction Guarantee--100 satisfaction guarantee. Please feel free to contact us if you have any questions about our product..

Adaptable VEHICLE COMPATIBILITY for Ford 7.3L 1994 - 2003.. Trustworthy PRODUCT INFORMATION The Injector Rebuild Kit is made of quality material, protect injector from all the dirt, oil, and grease that could potentially break down the tool quality. Corrosion-resistant, wear-resistant, and rust-resistant.. Detail PERFORMANCE If the clearance between your armature plate and adapter plate is causing cold start issues, you can install the washers to increase the clearance back to .004 to .005 like new injectors. Placed solenoid shims under all four corners of the solenoid for a total of .005 when solenoid is energized.. Item DIRECT INSTALL Easy to fix HARD TO START issue when cold without removing the injectors.. Tips PACKAGE LIST 1 Set Injector Rebuild Kit, includes stainless- steel washers solenoid spacer shims..

Fitments Replacement for Ford E350 E450 E550 F350 F450 F550 F59 7.3L. Part Number931-308,931308,F81Z-9C968-AB,CM5013. Package list IPR valve removal tool x 1. Quality Made of good quality material, no rusting or fading, long service life. Note If you have any problem after receiving it,please contact us and we will solve it for you.

Replacement for Part Number XC3Z9229AB, CM-5010, 833564C92, XC3Z-9229-AB, 1814376C1, F4TZ-9F538-A, E541-73TK T444E, F4TZ9F538A, DT466E, 3126, 3126B, 3126E, 1833564C91, 823492C97. Replacement for 1994-2003 Ford F-Series 7.3L and Ford E-Series 1994-2003 7.3L. Material Solid and durable with great rust and corrosion resistance. The product is made according to strict standards and can be installed directly. Please confirm the suitability of parts before purchase.

It is made of high quality materials with high reliability and good durability,moisture resistance,corrosion resistance. Long service time, reducing product replacement times. The product has passed strict quality test before leaving the factory. High temperature and low heat resistance. Before purchase, please confirm the suitability of parts in advance.

PART NAMEInjector Cup Removal Tool Install Kit for 6.0L Engines This Injector Cup Removal Tool Install Kit is specifically designed for 2003 - 2010 6.0L engines, including NAVISTARINTL engines. It's a perfect match for those in need of a reliable 6.0 powerstroke injector retainer clip tool, injector sleeve cup removal solution, and 6.0l injector cup tool. Manufacturer Part Number AB - E721 - 60TK, 3302.. CONFIRM YOUR PARTS Before making a purchase, it's crucial to double - check the PART NUMBER, MAKE, MODEL, and YEAR. This ensures that this injector cup removal tool kit, which is also suitable for injector sleeve cup applications, is the right fit for your 6.0 injector cup removal needs. We conduct rigorous quality inspections and tests before shipment and carefully package the items to guarantee they arrive in excellent condition.. ENGINE MAINTENANCE KIT Maintain the peak performance and extend the lifespan of your 6.0L engines with our all - inclusive sleeve removal and installation tool kit. Whether you're dealing with a 6.0 powerstroke fuel injector cup issue or just need a reliable injector cup removal tool, this kit has you covered. It includes high - quality injector sleeves, O - ring kits, and a specialized removal tool for effortless maintenance.. PRODUCT FEATURES Crafted from top - grade materials, our injector cup removal tool install kit offers outstanding corrosion resistance, wear resistance, and non - deformation properties. This means it can withstand demanding conditions and provide long - lasting performance, making it an ideal choice for all your 6.0 powerstroke injector retainer clip tool and related requirements.. AFTER - SALES SERVICE Experience enhanced engine reliability and performance with our kit's precision - engineered components. By using this injector cup removal tool to replace worn injector sleeves and O - rings, you can effectively prevent leaks, improve fuel efficiency, and ensure consistent engine operation for years to come. It's the ultimate solution for your 6.0L engine's injector sleeve cup needs..

Package Includes a comprehensive range of adapters compatible for Bosch, Delphi and Siemens common rail injectors that have solenoid or screw connections.. Comes with 3 puller hooks. Kit comes with an air powered tool uses vibrations and 20-30Nm torque, which removes tight and seized injectors. Specifications Working Pressure 72-116 psi 5-8 bar removes tight or seized injectors. Comprehensive range of adapters Package Includes1x air vibration tool 1x air hose 1x air plug 19x adapters 3x puller hooks.

Fitments Replacement for Ford F-Series 1994-2003, Replacement for Ford E-Series 1994-2003, Replacement for Ford Excursion 1994-2003. Fitments Replacement for Navistar T444E DT466E and Replacement for Caterpillar 3126 3126B 3126E engines. Part Number E541-73TK. Package List 1x Injector sleeve cup removal tool ,1x Install tool. Quality Made of good quality material for long-lasting durability.

Replacement for 1994-2003 F-Series E-Series 7.3L, Navistar T444E, DT466E and 3126, 3126B, 3126E Engines. High speed steel tap used in the removal tool is the quality available. It is used for removing and installing the injector sleeve cup. The removal tool has hardened threads. Package includes 1 Fuel Injector Sleeve Installer and 1 Fuel Injector Sleeve Remover.

Replacement for E350 E450 E550 F250 F350 F450 F550 F59 Diesel 7.3L 1999-2003. Replacement Part Number 931-308, 931308, F81Z-9C968-AB, CM5013. This part is made of quality materials, with good quality and high stability, ensuring the products service life. The installation of parts does not include instructions. To prevent installation errors, it is recommended that you hire professional personnel for installation. Please confirm the product model you purchased before purchase.

Set of injector socket tool is made of high quality steel, very sturdy, suitable for long-term use. The high-speed steel cone used in the disassembly tool has good durability, it will remain sharp, and you can use this tool hundreds of times. The removal tool has hardened threads, durable. Perfectly fit your car, and easy installation save your time. Please confirm the suitability of parts before purchase.

Made of quality high-speed steel wire taps, it has high reliability and good durability, moisture resistance. Injector sleeve cup removal and install tool can directly replace old or defective parts. The reinforced removal tool has its tap built in, so you can get your work done and your vehicle backon the road asap. Part Number F4TZ-9F538-A, F4TZ9F538A. Please confirm the model of the part in advance before purchasing.

REPLACES 3252 AP0083 AP0084 AP0085 Professional 2-piece injector sleeve cleaning kit removes carbon buildup, rust and debris from injector cups, bores and sealing surfaces without damage. SUPERIOR DURABILITY Premium rust-proof stainless steel bristles with reinforced ABS non-slip handle 3-5 longer lifespan than cheap brushes, zero bristle loss even under heavy use. WIDE DIESEL ENGINE COMPATIBILITY Perfect for most 1994-2024 diesel injector sleeves including 6.0L 6.4L 6.7L 7.3L, 5.9L 6.7L, 6.6L, C7C9, 3126, DT466, VT365, MaxxForce 57910. Compatible with almost all diesel engines Ford 4.5L-7.3L, Dodge Cummins, GM Duramax, Caterpillar, International, Isuzu 4HK16HK1 and more. Every kit strictly inspected with 12-hour professional customer support.

Applicable ModelFit for Ford All 2003 - 2010 6.0L and 6.4L Powerstroke Engines F250, F350, F450, F550. Application When diesel fuel in the cooling system caused by a crack in one of the cylinder heads, the cylinder heads need to be removed from the vehicle in order to replace the sleeves. This injector sleeve remover installer tool set makes this repair a relatively easy job and allows replacement of the injector sleeves cups without removing the heads from the vehicle.. Features The fuel injector sleeve remover can prevent the trouble of the injector sleeve constantly falling from the end of the tool, precise design, easy to use.. Quality Assurance Made by advanced blackening hard steel process, strong enough for longer service life, rust corrosion-resistant and durable.. Component 1 x Fuel Injector SleeveCup Remove Install Kit. Product Size 1.Installer Size 2.5x14cm 0.98x5.51DH 2.Cutter Size 11x2cm 4.33x0.79LW 3.Puller Stud Size 3x15cm 1.18x5.91DH. Customer Service 1 year product quality warranty. Please get in touch with us at any time if the product has any quality issues, such as damage or vehicle fitment..

Fitment Replacement for Ford All 2003 - 2010 6.0L and 6.4L Powerstroke Engines, include F Series 250, 350, 450, 550 and more. Material Characteristics The tool is made of treated hardened steel material with corrosion resistance, suitable for long time use to meet the repair needs.. Easy to Operate The design of the tool makes it easy to replace the injector sleeve without disassembling the engine, effectively reducing the time and difficulty of repairs.. Easy Replacement If the individual threaded cutters in the tool are worn or damaged, they can be replaced at the hardware store at a lower cost without having to replace the entire tool.. Precise Design The tool is precisely designed to meet high precision and hardness requirements for both professional and personal repair needs..

INFORMATION Made of Plastic and Stainless steel Wrench pliers For SCR post-processing system repair tool fuel injector filter removal tool. For most multi-port fuel injectors. This tool makes removal of the old filters and installation of the new filters much easier.. PACKAGE 1 x Fuel Injector Filter Remove Tool. QUALITY CONTROL This fuel injector tool installation set is 100 testing during the manufacturing process.. EASY TO INSTALL The Fuel Injector Filter Remove Tool easy to use, but if you don't have a similar experience, we recommend to ask support from the automotive specialist.. SATISFACTION HiSport ensures brand new and high-quality products. In terms of any problem with this product, please contact us, our friendly assistants will always be available to help you within 24 hours..

Part NumberF4TZ9F538A, T444E, WT73PD,ZTSE4303, XC3Z-9229-AB, XC3Z9229AB, CM-5010, 1833564C92, ,1814376C1,1833564C92,1833564C91,1823492C97. Vehicle FitmentCompatible with Ford E-350 1995-2003, For E-450 2000-2003, For E-550 2002, For Econoline Super Duty 1996-1999, For Excursion 2000-2003, For F Super Duty 1995-1997, For F-250 1994-1997, For F-250 Super Duty 1999-2003, For F-350 1994-1997, For F-350 Super Duty 1999-2003, For F-450 Super Duty 1999-2003, For F-550 Super Duty 1999-2003, For F59 1994-1996. Product IncludesRemoval Tool, Installation Tool, Seals, 8 Cups, and Cleaning Brushes. NotesFuel Injector Cup Installation Kit -- 7.3L V8 Diesel Powerstroke Fuel Injector Sleeve Cup Removal and Installation Tool Kit With Seals, Cups, and Brushes. Purchase with ConfidenceEnjoy a 12-month guarantee on each product for your peace of mind.

Product Name Injector Sleeve Cup Hole Seat Cleaning Brush Kit Car Wash Brush Fuel Injector Cleaner. Product Application Suitable for 4.5L LCF 6.0L 6.4L 6.7L 7.3L , suitable for 3126 C7 C9 , suitable for T444E DT466 VT365 VT275 , suitable for 57DT910N9N10 , suitable for 5.9L 6.7L , for 4.5L 6.8L 8.1L 9.0L HPCR for 4HK1 6HK1 HPCR. Function Application It can clean and polish your injector sleeve cup hole valve seat to remove deposits eh, debris, dirt and other impurities to provide you with better working efficiency.. Package Include Including 1 stainless steel spiral tube brush and 1 stainless steel flat bottom brush, cleaning kit combination as your necessary for cleaning injectors.. Note If you have any questions about our products after purchase, we will provide you with a return service, sincerely for your service..

INSTALLATIONS - Easy to install This tool allow you to easily remove the filters from your Top Feed Injectors on one side while providing you with an installation surface to safely install newly purchased filters on the other. PRODUCT INFORMATION - Use the high quality ABS plastic material,dimension 8 cm, pack into 2 pcsset.2 removal tools are suitable for different sizes of filters, suitable for most filter removal functions. COMPATIBILITY - This fuel injector filter tool used for any type of Top of Side Feed Fuel Injector Filter. HIGH CONTROL QUALITY - All tools are benches tested in-house before packaging and shipment to our customers, your satisfaction is our best premium, we want to deliver you a quality and safe product. POST SERVICE - After receiving the product, you can consult us how to install, will offer you the most patient answer.

INSTALLATIONS - Easy to install This tool allow you to easily remove the filters from your Top Feed Injectors on one side while providing you with an installation surface to safely install newly purchased filters on the other. PRODUCT INFORMATION - Use the high quality ABS plastic material,dimension10.5cm, pack into 1 pcsset. COMPATIBILITY - This fuel injector filter tool used for any type of Top of Side Feed Fuel Injector Filter. HIGH CONTROL QUALITY - All tools are benches tested in-house before packaging and shipment to our customers, your satisfaction is our best premium, we want to deliver you a quality and safe product. POST SERVICE - After receiving the product, you can consult us how to install, will offer you the most patient answer.

This two tool set of injector cup removalinstallation tools are designed to work on screw-in stainless steel cups found on Detroit Diesel 60 Series engines. Ruggedly constructed tools allow easy damage-free removal and installation of both styles of stainless injector cups used on these engines. One tool is designed for use on screw-in stainless cups 240-1039, 23538840, 240-1035, and 23533148. The other tool is for use on screw-in stainless cups 240-1045, 23534745, and 23538829. Includes 10 extra O-rings similar to Kent-Moore J-46904 and J-48824 not for use on brass cups.

Removes and installs fuel injector sleeve cup. Saves time by eliminating need to remove heads. Services F-250, F-350, F-450 F-550 Super Duty 7.3L engines. Compare to Ford Factory Tools 303-DS105 D94T-9000-B 303-D109 D94T-9000-C..

Injector Puller Set for Cummins. Drop forged body. Two jaw design firmly grips the injector. Heat treated jaws for durabilty. Puller will handle a variety of injectors found in Cummins engines mechanical L-10 PDT and PTD top-stop 855NH.

OTC Ford Injector Remover and Installer Kit. Remove andor install injectors without damaging the injector or cylinder head. For use on 1994-2003 Ford 34- and 1-ton trucks, Super Duty trucks, and vans with 7.3L direct-injected turbocharged DIT diesel engines. Tool designed specifically for this application - prevents need for makeshift removal tools or potentially damaging crowbars. Similar to Ford Nos. 303-491303-492 instructions included.

Set of injector socket tool is made of quality steel, very sturdy, suitable for long-term use. Replace Part Number XC3Z9229AB, F4TZ-9F538-A. The removal tool has hardened threads, long lasting. Package includes 1 fuel injector sleeve installer and 1 fuel injector sleeve remover. Please confirm the suitability of parts before purchase.

Compatible models For Dodge Ram Truck 1500 2500 3500 4500 5500 2006-2009 5.9L Cummins Diesel Engine 2007-2019 6.7L Cummins Diesel Engine. High Quality made of high-quality carbon steel, the surface is coated with black anti-oxidation coating, which has high hardness, high strength, wear resistance, stable performance and reliable use, and longer service life. Application This tool is used to assist in the removal of the injectors from the cylinder head without causing damage to the injector body. Removal without damaging the injector body and intricate components within the injector is crucial, due to the high cost of the injectors.. Features This special tool must be used to prevent damage to the new style fuel injector during service procedures on the new Cummins 5.9 and 6.7 Liter Diesel Engine in DR Trucks, used with the required 9015A to remove the high-pressure connector tube in order to remove the injector..

In-Vehicle Application - The tool set simplifies the removal and installation of fuel injector sleeves directly within the vehicle, eliminating the need to remove the engine and reducing repair time. Comprehensive Kit - Includes tools for easy removal and installation of fuel injector sleeves, nozzles, cups, and tubes. Efficient Operation - Seamlessly works with 7.3L, 3126, 3126B, C7, and C9 engines, making it ideal for both professional mechanics and DIY enthusiasts. The puller is the same for the 7.3L, while the installers vary for different engine models. Heavy-Duty Construction - Made from high-strength materials, this tool is durable with craftsmanship-grade performance and longevity, capable of handling the heavy-duty tasks often required in vehicle repair and maintenance.

Wide Compatibility Fits Ford 4.5L LCF, 6.0L6.4L6.7L7.3L Powerstroke Caterpillar CAT 3126, C7, C9 Navistar T444E, DT466, VT365, VT275 MaxxForce 57DT910N9N10 Chevy 6.6L Dodge Cummins 5.9L6.7L 4.5L6.8L8.1L9.0L HPCR Isuzu 4HK1, 6HK1 HPCR, meeting diverse vehicle needs. Effective Cleaning Removes carbon deposits, rust, and dirt from injector seats, bores, and cups without causing damage, ensuring safe engine maintenance. High Quality Rigorously factory-tested with strict quality control, delivering A performance and reliable durability. Enhanced Engine Performance Deep cleaning optimizes engine efficiency, extends injector and engine life, and boosts overall power output. Package included 1pcs Spiral Tube Brush ,1pcs Flat Bottom Brush.

Compatible with 2011-2018 Ford 6.7L Powerstroke Diesel F-250 F-350 F-450 F-550. Material Made of heavy duty steel with black finish, high hardness,, strong and durable , hard to corrosion.. Protection injectors Acting on help removal safely of the injectors from the cylinder head without causing damage to the injector body.. Easy to Install First remove the orignal bolt and crab slides, Second Install the remover to sit into the injector , Lock the fuel injector remover with tightening the head bolt, Finally Install the forcing screw with using a socket and injector will be free.. Package included 1pcs Injector remover , 2pcs bolt 1pcs Long bolt and 1pcs Short bolt . 100 Satisfaction quality and service If you're not 100 satisfied with our PRODUCTS, simply return it and refund in 30 days. Professional AND Sincere Service allows you to take no risks to purchase..

UNIVERSAL APPLICATION - Various adaptor make the set suitable for most diesel injectors. Make your work easier for removal of diesel injectors quickly and great for pulling jobs, against the bearing for pulling out evenly without damage the parts. 6 ADAPTORS - M14 x 1.5 for dalphi-adaptor M17 x 1 for bosc-h adaptor M20 x 1 for den-so adapters M25 x 1 for siemen-s adapter M27 x 1 for siemen-s adapter M27 x 1 for bosc-h injector nozzle adaptor. DIESEL INJECTOR EXTRACTOR MASTER SET - 3 Different slide hammers 1.6 kg, 160 mm 2.7 kg, 460 mm 5.1 kg, 600 mm 2 Pulling claws with fork opening 13.7 x 18 mm, 105 mm12.7 x 19 mm, 130 mm 5 Slotted 6-pt 12 sockets, 100 mm length sizes 25 - 27 - 28 - 29 - 30 mm Injector extractor, sleeve design, with shells outer diameter 35 mm internal diameter 29 mm, M17 x 1.0 spindle pulling adapter with external thread. HIGH QUALITY CARBON STEEL - The diesel injector extractor set are composed of high-quality carbon steel, which is treated at high temperature throughout the whole process and has a long service life. It is suitable for quickly and safely disassembling the fuel nozzles. PERFECT KIT FOR YOU - maXpeedingrods diesel injector puller kit is very suitable for professional machinist or DIY enthusiast.

Updated Design Only connect pneumatic injector puller to a reliable air supply max 5-8 bar , the pneumatic force to quickly and easily remove stubborn, rusty, or stuck injectors, effectively reducing the time and effort required for manual removal. Wide Compatibility Comes with 19 various adapters to extract most of injectors. M8x1.0, M8x1.25, M8x1.5, M12x1.5, M16x1.5, M17x1.0, M18x0.75,M18x1.5, M20x1.0, M20x1.5, M22x1.5, M25x0.5, M25x1.0, M26x0.75, M27x0.75, M27x1.0 x2, M29x1.0, M31x0.75. High Quality The diesel injector extractor set are composed of 45steel, which is treated at high temperature throughout the whole process and has a long service life. Easy to Store The Injector Remover Extractor Tool is equipped with a thickened anti-collision suitcase with built-in precise-sized slots, so that the tool can be neatly placed in the box after each use, which is convenient for storage and carry. Why Choose US Most others diesel injector puller are manual operation. This pneumatic tool makes it easier to extract the most stubborn fuel injectors without any damage. Besides, reducing labor time and increasing efficiency in vehicle maintenance tasks.

Easily Remove The InjectorThe fuel injector puller removal tool applies linear pulling force to the injector through a sliding hammer, ensuring precise directional force to avoid damage to the injector and surrounding seals caused by angle deviation. Even stubborn injectors with carbon deposits or slight deformation can be easily removedsaving time and effort.. Wide Applications This fuel injector removal tool is compatible with GM, Chevy, Cruze, Malibu, Equinox, Buick, VauxhallOpel Adam 2016 - 2020, Astra K 2015 - 2019, Mokka X 2018 - 2020, Corsa E 2015 - 2020, MG ZS 2017 - 2021. Applicable engine types 1.0L LE1B10, 1.4L LDDD14XEL, 1.5L 15E4E, D14NEJ, D14XER, D14XFT, D14NEH, LUJD14NEL, LE2D14XFL, LUJD14NE.. Special DesignThis fuel injector puller features a bolt-secured injector base that ensures solid fastening without loosening, delivering even and precise force distribution for improved injector removal efficiency. OEM Part Number TEN00140.. High Strength MaterialThis fuel injector removal tool is made of excellent steel material, which is high in strength and not easy to deform. The surface is electrophoretic treated to prevent corrosion and rust, ensuring long-lasting durability.. Kindly NoteBefore removing the fuel injector, ensure the engine is completely shut off to relieve any residual fuel pressure in the system. Wear protective gloves to avoid skin contact with fuel.. 12-Month WarrantyWe provide 12-month product service and 7 x 24-hour customer service to ensure your shopping experience. If your parts or products are damaged, don't hesitate to tell us and we will replace them for you.

INJECTOR REMOVAL TOOL The ReluxGo Diesel Fuel Injector Slide Puller is designed for removing stuck common-rail diesel injectors quickly and safely without dismantling the cylinder head for injector nozzle cars The injector remover kit contains a 1.3-pound .6 kg shop hammer weight and M8, M12, M14 adapters. REPLACING OLD INJECTORS Fuel injectors are important as they are what injects fuel directly into the cylinder, but because of their continuous use, they are prone to cracks, breaks, and minor physical wear Symptoms of this issue can range from rough engine idle, slow acceleration, misfire, bad gas mileage, to gas leaks This fuel injector tool helps to easily remove injectors for testing and cleaning as well as replacement. GREAT FOR BOSCH AND LUCAS INJECTORS This kit includes a 7-inch 178 mm bar and a 1.3 lb. .6 kg slap hammer weight along with M8, M12, M14 thread adapters This injector puller tool assists in removing stubborn Bosch and Lucas diesel injectors Adaptors and slide hammer are stored in a convenient plastic box for storage and travel. STEADY CONSTRUCTION Made of a strong, durable steel, this automotive hammer puller tool is sure to pull even the toughest fuel injectors from tight positions This remover kit has a steel rod with two threaded ends The durable metal helps to increase pulling strength and force while also providing longevity for the tool. EASY TO USE To use, first attach the tool to the injector you wish to remove, then yank the weight towards the handle to give an extra snap of weight to the stuck part The force transfers to the shaft, pulling the attached end and injector in the desired direction Repeat action until the part is removed Always work with a cold engine to avoid damage and remember to replace all injectors as a set to keep engine balanced.

APPLICABLE TO The SMMS Injector Brush Kit fits For GM for Chevrolet 6.6L for Isuzu 4HK1 6HK1 HPCR for CaterpillarCAT 3126 C7 C9 for MaxxForce 57DT910N9N10 for Navistar T444E DT466 VT365 VT275 for Ford 4.5L LCF 6.0L 6.4L 6.7L and 7.3L Powerstroke for Dodge Cummins 5.9L 6.7L , 4.5L 6.8L 8.1L 9.0L HPCR. OE NUMBER AP0084, AP0085, 3252 AP0083. Please check your model. Any questions can ask for us before buying. FUNCTION The Injector Cleaning Brush Kit removing carbon deposits, rust, and dirt from injector seats, bores, and cups without causing damage makes the task easier and saves you time.. Superior Quality Premium grade wear-resistant steel wire for durability, anti corrosion and rust. Comfortable ABS plastic handle to keep stable and safe. Provides a much longer service life of the injector brush kit.. ABOUT SMMS - We are a professional auto parts source factory committed to providing high-quality products crafted with top-grade materials and adhering to stringent manufacturing processes to meet replacement needs effectively..

Vehicle Fitment Designed for Ford 1994-2003 7.3 Powerstroke for Navistar T444E DT466E for Caterpillar 3126 3126B 3126E Diesel Engines F-Series E-Series Excursion. OE Replacement Fuel Injector Sleeve 1814376C1, F4TZ9F538A. High-Quality Material The Injector Sleeve Cup Installation Removal Tool Kit is made of brass material, which has high strength, high hardness and strong chemical resistance. Easy Installation With straightforward instructions and a user-friendly design, this kit allows for a smooth and effortless installation process, saving you time and effort. After-sale Service Enjoy 30-day return and 12-month warranty, making your purchase completely risk-free.

Widely compatibleCompatible with Land Rover Jaguar 3.0 5.0 petrol engine. Compatible with Jaguar X150, XK Series, X250XF, XJ models which with V8 5.0lt petrol engines. Compatible with Land Rover Discovery 4, new Range Rover, Range Rover Sport which with V8 5.0lt petrol engines.Compatible with EA835. Newly upgraded Compared with traditional fuel injector puller removal tools, our tool adopts a lever principle labor-saving structure. You only need to install the tool and use an ordinary wrench to rotate the screw to easily remove the fuel injector without damaging it. It is a set of professional tools worth having. It is easier to disassemble the fuel injection Normally, the injectors on vehicles are usually difficult to pull using traditional fuel injector removal tools, using the ZKTOOL upgraded fuel injector puller removal tool, you can easily remove the fuel injector in a small space. Excellent performance and material This product adopts a horizontal stable structure, which increases the stability of the tools, and is made of high -strength metal materials. It has the characteristics of super strong service life and is not easy to damage. The combination of excellent performance and materials is an essential tool for removing fuel injection.. Warm Tips In order to save your time, we hope that you can operate according to the video and operation steps we provide, so that you can have a better use process. Thank you for your support and cooperation.

Great CompatibilityPerfectly fits for CAT Caterpillar 3406E C-15 C-16 engines. These essential handy tools set for service the engines to save your time and money.. J-38587-A Engine Barring Socket ToolDirect replacement for 6749 ENL80-0054 9S9082. Used to manually turn over engine while servicing, was able to pin flywheel without the help of another person. Allows adjust injectors and valve lash much easier with this tool.. 9U-7227 Diesel Engine Injector Timing FixtureUsed for quickly and correctly adjusting fuel injectors to obtain a dimension of 78.0 0.2 mm 3.07 0.01 inch. The dimension is measured from the top of the unit injector to the machined ledge of the fuel injector body.. 9U-6891 Injector Sleeve Remover installer Tools SetDesigned to remove and install the injector sleeves quickly and easily. Works in an easier way to save your time and money.. 100 Satisfaction GuaranteeIf you're not satisfied with this kit, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo.

PART NAME Injector Sleeve Cup Installer Remover Tool Kit.

What You Get In this cleaning brush kit, it include 1pc stainless steel spiral tube brush, 1pc stainless steel flat bottom brush, 4pcs hook and pick set, total 6pcs for your work on injector sleeve cup bore seat.. Durable Quality Brushes are made of wear resistant stainless steel, have high strength and toughness, anti-corrosion and never rust. Comfortable pvc plastic handle to keep stable and safe.. Efficient Cleaning The brushes are designed for removing carbon deposits, rust, dirt and other debris from injector seats, bores, tubes, nozzles, and cups without damage.. Hook and Pick Set Includes a full hook, straight pick, 90 degree pick and 45 degree hook. They are small enough and with sharp tip, can reach to narrow places and easily pick out the residue, make your cleaning work faster.. Compatible with Engines Ford 4.5L LCF 6.0L 6.4L 6.7L and 7.3L Powerstroke CaterpillarCAT 3126 C7 C9 Navistar T444E DT466 VT365 VT275 MaxxForce 57DT910N9N10 GM 6.6L Dodge Cummins 5.9L 6.7L Isuzu 4HK1 6HK1 HPCR..

Top Quality Well-Manufactured Injector Cup Sleeve installation Removal Tool is an engine tool kit made from sturdy, tough prime fibrous Alloy materials that engines enhanced durability and superior reliability.. A must have tool for any shop working on cat C7 C9 7.3L engines with heui electronic fuel injectors 10R-0781, This Fuel Injector Sleeve Tool helps with the removal and installation of the injector cups without damaging the cup in the process.. Fitment Replace for Cat Marine Model 3126 3216B 7.3L engines with heui electronic fuel injectors. All hardware has been coated for rust resistance as well as a rockwell hardness of over 62 to ensure a long-life uses. This will NOT work on engines with mechanical injection Meui. Replace for OE Part Number 227-2911, 240-1003, 4036, 3216B, 3126. KIPA Tool utilize the latest in metallurgical and coating technology it allows us to thread our removal tool into the damaged injector cup without creating any filings or chips to fall into your cylinders. The tool use bridges that are quickly fastened to the injector mounting holes.. Our design is engineered towards repeated shop use, and efficiently removing and installing the injector cups. Removing and installing the injector cups should be a surgical operation, not something requiring beating cups in with hammers and leaving steel filings from removing. KIPA designed our tools with tight clearances, and clean injector bores, Accurcy and top Quality.