APPLICATION- EVIL ENERGY 6AN ORB to 6AN Flare adapter is widely used in Oil Fuel Water Fluid Airline Gas hose Ends. The 6AN Male port fit all oil cooler fuel tank fuel pump fluid Line. The fitting has 37-degree AN sealing angle design and another ORB port design assures leak free performance.. ORB adapter uses a male fitting with an o-ring to seal in a female port with an angled section where the o-ring seats. O-ring boss adapter has a straight thread and therefore do not damage the mating part. This fitting seals by the o-ring and the only thing it really needs is a little bit of lubrication on the o-ring, petroleum jelly or some sort of petroleum product such like oil. This design makes the fitting reusable.. Easy to install. Apply a bit of petroleum jelly to o-ring before installation. When installing straight ORB-6 fitting, screw fitting into mating part until preformed packing is fully seated in mating packing seat. Tighten fitting until snug. Check ORB fitting for leakage during system start up. If leaking, loosen connecting tube or hose and tighten ORB fitting. Re-tighten tube or hose.. The ORB fittings are made of high-quality aluminum alloy material for strong strength. Anodized and hand polished finish add the final touch of quality and protection. Black anodized for great appearance and anti-corrosion, superior thread strength. The o-ring is made of NBR, features with excellent oil resistance and heat-resisting Temperature Range -40F to 212F. The adjustable wrench is highly recommended. ORB adapter can be reused and recycle. Due to the high-quality material which makes 6AN ORB fitting worked last for long. Six-month warranty provide by EVIL ENERGY. We value your shopping experience and strive to offer a high-quality product and service..

Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY.. Thread Size of 6AN PTFE Fitting is 916-18UNF and work with PTFE fuel lineHose ID 0.31 inch OD 0.43-0.47 inch.. The PTFE hose end is reusable, just ?replace a new ferrule if you reinstall the fitting.. EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters.. Warrany EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

Size The thread size of 6an is 916-18 UNF.. Seal The AN flare is sealed at a 37 degree angle.. Parameter Max Working Pressure 1500 PSI. Working Temperature Range -65 F to 252 F.. Material Made of aluminum alloy 6061-T6, anodized black surface.. Function The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters..

Product Size Parameter Size 6AN. Thread Size 916-18 UNF. Working Pressure 1500PSI. Working Temperature Range -65F-252F. Angle 04590 Degrees. Application The PTFE fittings help connect and route fuel hoses in tight spaces. Suitable for use with PTFE fuel lines for gasoline, diesel, oil, coolant, and air applications. Easy Installation Require an AN adjustable wrench for installation. A 360 swivel design provides enough flexibility for easy assembly. Anti-Leak Seal At the AN side, there is a 37-degree flare angle to form a complete seal without applying an extra sealing compound. Built to Last The one-piece PTFE hose end fitting is made from lightweight 6063-T6 aluminum alloy, and a black anodized finish on the surface increases durability, anti-corrosion, and wear resistance.

Size PTFE 6an fuel line ID 516 0.31 inch. OD 0.45 inch. Length 20 ft6 m. Please measure before purchase Includes as shown in the picture. Parameter PTFE fuel line hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium EVIL fuel line kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size This fitting is 6AN to 38 barb. The thread size of the 6AN end is 916-18 UNF. Application The barb fitting works only with rubber fuel lines. Parameter Maximum working pressure 1,500 PSI. Temperature range -40 to 248. Material The 90-degree fitting is made of 6061-T6 aluminum alloy. Installation This 6AN 90-degree fitting is easy to install. It is recommended to use clamps to enhance sealing.

Fuel Pressure Take-off Fitting The fuel pressure take-off fitting is an AN6 male to -6 female with a 18 NPT gaugegage port. The thread size of the 6AN is 916-18 UNF.. Sealing The AN thread of the flare is sealed at a 37-degree angle, and the NPT thread is sealed with a 60-degree taper. It is highly recommended to use sealant or PTFE polytetrafluoroethylene tape on the NPT port.. Material The fitting is made of 6061-T6 aluminium alloy.. Parameter The maximum working pressure is 1,500 PSI. The working temperature range is -40F to 250F.. Application The fitting is widely used in fuel systems to add a fuel pressure gauge or sensor between fuel lines..

Size This fitting is 6AN to 38 barb. The thread size of the 6AN end is 916-18 UNF. Application The barb fitting works only with rubber fuel lines. Parameter Maximum working pressure 1,500 PSI. Temperature range -40 to 248. Material The straight fitting is made of 6061-T6 aluminum alloy. Installation This 6AN straight fitting is easy to install. It is recommended to use clamps to enhance sealing.

Size Thread Size of 6AN PTFE Fitting is 916-18UNF.. Application The PTFE Hose End only work with PTFE fuel line.. Parameter Working pressure 1500PSI. Temperature range -65F-252F.. Seal The AN side is sealed by a 37 degree angle.. Material and Feature Made of aluminum alloy 6061-T6. 360 Swivel design for easy assembly..

Size 6AN to 38 inch barb Thread size of 6AN 916-18UNF, Widely used in fuel systems, oil coolers, steam emission setups, and for transitions in fuel, oil, or coolant lines. It is compatible with rubber hoses, including SAE 30R7 NBR. Package include 6AN Push Lock Kit. Contains 6 aluminum straight fittings and 4 x 90-degree elbow fittings black with 10 stainless steel clamps. Material 6061-T6 aluminum construction withstands 1500 PSI and -65F to 252F temperatures suited for most automotiveindustrial environments. Barbed ends designed specifically for standard rubber fuel hose compatibility not for hardline or PTFE. Durable Corrosion Resistant Constructed from Aluminum materials with a sleek black finish. Resists corrosion and withstands demanding automotive or industrial environments. Installation Features convenient push-lock design for quick and tool-free assembly. Simply push the hose onto the barbed end for a reliable, vibration-resistant seal. Notice The clamp can be used for connecting CPE hose, while rubber hose do not require the use of a clamp.

Size Thread Size of 6AN PTFE Fitting is 916-18UNF.. Application The PTFE Hose End only work with PTFE fuel line.. Parameter Working pressure 1500PSI. Temperature range -65F-252F.. Seal The AN side is sealed by a 37 degree angle.. Material and Feature Made of aluminum alloy 6061-T6. 360 Swivel design for easy assembly..

Size AN6 to 18 NPT, the thread size of 6AN is 916-18 UNF.. Material Made of aluminum alloy 6061-T6, anodized black surface.. SealingThe AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread.. Application Widely used in fuel systems, cooling systems, power steering systems, etc.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench..

Size PTFE 6an fuel hose ID 516 0.31 inch. OD 0.45 inch. Length 20 ft6 m. Please measure before purchase Includes as shown in the picture. Parameter PTFE Line Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

size This fitting is 6AN to 38 barb.The thread specification for the 6AN push-lock hose fitting is 916-18 UNF. Parameter Maximum working pressure1,500 PSI.Working temperature range -40F to 248F. Material Made of aluminum alloy 6061-T6 , anodized black surface. FeatureThe barb fitting works only with rubber fuel lines.. ApplicationPush-lock hose fittings are widely used in fuel systems, oil coolers, and as transition fittings for fuel, oil, or coolant lines..

BETTER KITS 26FT AN6 Fuel line 12pcs PTFE Hose End Fitting 4pcs Quick Disconnect Fitting 6pcs Hose Separator Clamp 2pcs 6AN Male Coupler 1pcs Standard Wrench 1pcs Way Reaming Tool.. SPECIFICATIONS Inner Diameter 38. Outside Diameter 0.465. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 3000psi. Bursting pressure 10000psi.. EFFECTIVELY PTFE fuel line can be compatible with all automotive fuelslubricantscoolant. Mostly used in EFI LS system and used as fuel injection hose, ls engine swap, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, vapor return line, etc.. MATERIAL The 6an fuel line kits made of more corrosion-resistant nylon Stainless Steel Braided PTFE Synthetic Rubber The fitting made of T6061 Aluminum. The material of union adapter is lightweight aluminum.. SERVICE 6AN PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended. If you have any questions, please contact with us, we are in 24 hours service.

Size This fitting is 6AN to 38 barb. The thread size of the 6AN end is 916-18 UNF. Application The barb fitting works only with rubber fuel lines. Parameter Maximum working pressure 1,500 PSI. Temperature range -40 to 248. Material The straight fitting is made of 6061-T6 aluminum alloy. Installation This 6AN to straight fitting is easy to install. It is recommended to use clamps to enhance sealing.

Size The fitting is an AN6 to 38 NPT adapter, and the thread size of the 6AN is 916-18 UNF. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Sealing The AN side of the flare is sealed at a 37-degree angle, and the NPT thread side is sealed with 60-degree tapered threads.. Application The fitting is widely used in fuel systems, cooling systems, power steering systems, and more.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended..

Size The thread size of the AN6 hose end is 916-18 UNF. It is only compatible with 6AN stainless steel and nylon braided hoses. The ID of the 6AN line clamp is 0.51 inch 12.9 mm. Material The fitting is made of 6061-T6 aluminum alloy with a black anodized surface. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252. Function The 6AN swivel hose end kit includes multiple angled fittings and 6AN unions to meet various installation requirements. The 6AN separator clamp is used to secure and organize lines, keeping your project clean and organized. Application It is widely used in transmission lines, fuel filters, fuel injection systems, cooling systems, and more.

Package include4X Straight Swivel Fuel Hose End.During the installation,the included accessory o-ring is not a must.Whether it can be used or not depends on your own need.Choosing not to use it won't influence the subsequent installation.. INDUSTRIAL QUALITYThe female AN6 fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength.. UNIQUE DESIGNSwivel design for easy assembly,Please select the corresponding wrench to use.4AN-4S wrench 6AN-6S wrench 8AN-8S wrench 10AN-10B wrench.. Wonderful for universal use6AN swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our 6AN fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose,rubber hose.. ServiceIf you have questions of our female AN6 swivel fittings,you can contact us.We value your shopping experience and strive to offer a high-quality product and service..

Size The thread size of the 6AN fitting is 916-18 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252-53 to 122. Feature The 6AN 90-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

100 QUALITY MATERIALThe fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum.Working Temperature Range -65 to 252 -53 to 122.Max Working Pressure 1000psi. EASY INSTALLATIONSwivel fittings are easy to use and don't require special equipment. These new full flow swivel hose ends swivel to allow for a quick alignment of the hose after assembly. WIDELY APPLICATIONS6AN swivel hose end 6an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on. Package Including2pcs 6AN Straight hose fitting 2pcs 6AN 45 Degree hose fitting 2pcs 6AN 90 Degree hose fitting 2pcs 6AN 180 Degree hose fitting 6pcs 6AN Hose Separator Clamp 2pcs 6AN male coupler. 100 SATISFACTIONIf you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem.

Size 6AN female to 38 inch, the thread size of the 6 AN is 916 UNF. Fits to 38 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 38 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. Note Only applicable to stainless steel or aluminum hardline..

Size 6an female to 38 barb, and that of 6an thread size is 916-18UNF.. Material made of aluminum alloy, reusable and recyclable.. Max pressure 2000PSI, temperature range -40 to 248.. Please attention that an6 push lock hose barb only compatible with rubber fuel line.. EVIL ENERGY provide 3 angles of 6an hose barb straight, 45degree, 90degree..

Full Customization in One Kit This 23-piece kit includes 8x 6AN barb fitting 04590180, 8x hose clamps, 4x male fittings, 2x hose separator clamps exclusive AN fittings wrench protectors. Mechanics-approved 92 of jobs completed with just 1 box. No more last-minute car tuning shop runs.. Say Goodbye to Leak Precision-machined from high quality aluminum, our 37 sealing angle 6an push lock hose fittings create perfect seals. 360 barbed teeth dig into hose liners, creating a mechanical grip 3X stronger than other push lock fittings.. Hassle-free Installation Just push the hose over the barbed end, the teeth self-guide for perfect alignment, 50 faster than regular AN fittings. Included stainless hose clamps grip 2X tighter, no more blown hoses. Ideal for NBR rubber push lock fuel hose use.. Exclusive Wrench Protectors Scratched AN fittingsCorrosionWaste fuel system investment. Our AN wrench protector absorb 70 torque stress while protecting anodized fittings surfaces. Only included in BRIFITOR kits. Notes AN wrench is not included in this kit, you can buy it in our store. Versatile Application Our 38 NBR push lock fuel hose kit only works with rubber hose on hydraulic system, transmission, fuel filter, fuel injection system, oil cooling system, marine fuel line, etc. Not compatible with PTFE or CPE hoses see description for hose requirements.. Notes Our fittings are CNC-machined to exacting standards, rigorously tested to ensure quality within our system. Manufacturing tolerances can vary between brands, you may encounter fitment challenges with third-party components. For optimal performance, recommend to use components from our brand..

AN6 916-18 UNF male to Parallel 2 x AN6 916-18 UNF male Y block fuel splitter. Manufactured from lightweight 6061-T6 billet aluminum. Anodized finish for strength, durability and anti-corrosion. Suitable for oil fuel coolant water air gas, etc Great for any liquid or gas application where a high-flow splitter is needed. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Fuel hardline fitting Only compatible with hard tube.. Size 6AN to 38 inch,the thread size of the 6AN is 916UNF.It's fits to 38 OD hardline,please measure before perchase.. Material Made of aluminium alloy fitting and brass ferrule.. Application This 38 hardline to 6an fitting is widely used in Brake System Air Fuel Delivery Engine Modification Oiling System Cooling System.. Maximum working pressure 4000PSI,Working temperature -65F to 252F..

Size The thread size of the 6AN fitting is 916-18 UNF. The AN side is sealed at a 37-degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252 -53 to 122. Feature The 6AN 90-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size The thread size of the 6AN fitting is 916-18 UNF. The threaded end is sealed at a 37-degree angle. Feature The profile of the hose end is more compact and is suitable for tight spaces. Application The hose fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy. The bending part is produced through a forging process. Parameter Maximum working pressure 1,500 PSI. Working temperature range -40 to 250 -40 to 121.

Package Included 2 pcs x 6AN to 6AN Male Flare Coupling Union Adapter. Thread size of 6AN male coupler is 918-18 JIC, can use to splice or extend a line, works with female thread fitting.. Black 6061-T6 aluminum 6AN flare union work temperature -65 to 252 degree F, max pressure 1000 psi, ultimate torque 25N.. Male to male flares coupler usually used in fuel system,such as fuel hose extend, line connect to fuel filter, fuel pump, cooler system.. Mala union fittings can works with EVIL ENERGY Swivel fitting, push lock fitting and female AN fittings.Please match the correct size..

Size Thread size of 6AN is 916-18 UNF.. Parameters Working Pressure 1500PSI. Temperature range -40F to 250F-40C to 121C. Sealing The AN thread of the flare is sealed by a 37 degree angle. Material Made of 6061-T6 aluminum and reinforced with black anodized aluminum for greater corrosion resistance. Application Widely used in automotive fuel systems, such as carburetors and injectors, as well as fluid systems.

Female to Female Swivel Adapter Fitting Size female AN6 to female AN6 916-18 UNF thread pipe connectors.. Advantage the swivel 360 design allows you to get things reasonable tight while still maintaining the swivel functionality so that you can ensure a proper connection and positioning before doing that final tightening down to lock everything into position.. The 6AN swivel fitting coupler can be used with fuel, oil, gas, fluid, Water.. The female coupler swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. Can be suitable for competition applications where reduced weight is needed.. The AN adjustable wrench is highly recommended. Six-month warranty provide by EVIL ENERGY. We value your shopping experience and strive to offer a high-quality product and service..

Size AN6 to 38 NPT, the thread size of 6AN is 916-18 UNF.. Material Made of aluminum alloy 6061-T6, anodized black surface.. Sealing The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread.. Application Widely used in fuel systems, cooling systems, power steering systems, etc.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench..

Thread size -6 AN male flare to -6 ORB O-ring, pack of 2. Manufactured from lightweight 6061-T6 aluminum. Anodized finish for strength, durability and anti-corrosion. Suitable for oil fuel coolant water air gas, etc. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size The thread size of the 6AN fitting is 916-18 UNF. The AN side is sealed at a 37-degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 180-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252 -53 to 122. Feature The 6AN 180-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size The fitting is an AN6 to 14 NPT adapter, and the thread size of the 6AN is 916-18 UNF.. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Sealing The AN side of the flare is sealed at a 37-degree angle, and the NPT thread side is sealed with 60-degree tapered threads.. Application The fitting is widely used in fuel systems, cooling systems, power steering systems, and more.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. The fitting allows easy installation and removal with a wrench..

Size 6AN male flare to 38 inch, the thread size of the 6 AN is 916 UNF. Fits to 38 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 38 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. NoteOnly applicable to stainless steel or aluminum hardline..

Tips6AN PTFE hose end can be work with PTFE fuel line only.It can not be installed on braided CPE fuel line.. SizeThread size of 6AN PTFE fitting straight is 916-18UNF and the PTFE fuel line which works with should be 38.. Package Included4pcs x PTFE 6AN fitting straight.. OtherROSY PIXEL provide plently kind of fuel fittings, swivel and PTFE hose end and other fitting adapters.. ServicePlease feel free to contact us, if you are dissatisfied with the product you received or have quality problems..

All-in-One Custom Kit This CPE hose fitting kit includes 8x 6AN fittings 04590180, 4x adapters, 2x clamps, and exclusive AN fittings wrench. Complete 92 of jobs with one kitno last-minute store runs.. Leak-Free Durable CNC-machined from high-grade aluminum not cast metal with a 37 sealing surface. Our CPE fittings can resist high pressure and temperature for a reliable seal.. PRO-GRADE TOOL Prevents Damage Ensures a Perfect Seal.Tighten like a pro. Our custom AN wrench fits perfectly to avoid stripping or scratching your AN fittings, guaranteeing a leak-free seal every time.. Wide Compatibility Works with stainless steel or nylon braided CPE hose in fuel,oil,and coolant systems.Not compatible with PTFE hoses.. ULTIMATE DIY VALUE Save Time, Money a Second Trip. The smarter buy. Why get just fittings Our all-in-one solution delivers the tool and adapters youll need, saving you hassle and extra costs..

Size The thread size of the 10AN fitting is 78-14 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 10AN 45-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252-53 to 122. Feature The 10AN 45-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size The thread size of 6an is 916-18 UNF.. Material Aluminum alloy 6061-T6.. Seal The AN flare is sealed at a 37 degree angle.. Parameters Working Pressure 1500PSI. Temperature range -40F to 250F.. Application AN6 tee fitting can work with oil, fuel, e85, fluid, coolant and air..

Size Thread size of 6AN male coupler is 918-18 UNF.. Parameter Working Pressure 1500PSI. Working Temperature Range -40 to 250.. Material Made of Aluminum alloy 6061-T6, anodized black surface.. Sealing The AN flare side is sealed by a 37 degree angle.. Application Widely used in fuel systems and cooler systems, etc..

Size The thread size of the 6AN is 916-18 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The fitting is made of aluminum alloy 6061-T6 with a black anodized surface.. Seal The AN side of the flare is sealed by a 37-degree angle.. Feature The 360 swivel design makes it easy to install and helps save time..

Size The thread size of the 6AN male coupler is 916-18 UNF.. Seal The AN thread of the flare is sealed by a 37-degree angle.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The fitting is made of aluminum alloy 6061-T6.. Application The male-to-male flare coupler is usually used in fuel systems, such as extending fuel hoses or connecting lines to fuel filters, fuel pumps, or cooler systems..

Size AN6 916-18UNF female to 38 9.5mm hose barb. Manufactured from lightweight 6061-T6 billet aluminum. Anodized finish for strength, durability and anti-corrosion. These AN to hose barb fittings are designed for a wide range of automotive applications including fuel, oil or water lines. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size 6AN male flare to 516 inch, the thread size of the 6 AN is 916 UNF. Fits to 516 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 516 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. NoteOnly applicable to stainless steel or aluminum hardline..

Size AN6 916-18 UNF male flare to 78x20 male thread, pack of 2. Manufactured from lightweight 6061-T6 aluminum, comes with aluminum sealing washer. Anodized finish for strength, durability and anti-corrosion. Fits most Holley dual feed carburetors with 78-20 inlets, converts Holley carburetors with 78-20 threads to AN style connection. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size The thread size of 6an is 916-18UNF. The ID of the screw is 38 inch.. Seal The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.. Parameter Working pressure 1500psi Temperature range -40F to 250F.. Material Made of aluminum alloy 6061-T6.. Application Widely used in engine fuel rail, ls swap, transmission cooler, return line, fuel sensor, etc..

Size The fitting is female AN6 to female AN6. The thread size is 916-18 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40 to 250.. Sealing The AN side of the flare is sealed by a 37-degree angle.. Material The fitting is made of aluminum alloy 6061-T6 with a black anodized surface.. Feature The fitting is designed with a 360 swivel for easy assembly, and it can be reused and recycled..

Size AN6 916-18 UNF male flare to 38 inch 9.5mm push on hose barb, Pack of 2. Manufactured from lightweight 6061-T6 billet aluminum Anodized finish for strength, durability and anti-corrosion. 37 sealing angle guarantees a positive seal at maximum operating pressure. These AN to barb fittings are suitable for a wide range of automotive applications including Fuel, oil, diesel or water lines. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Thread Size The thread size of 6an is 916-18 UNF,tube sleeve used to 38'' OD stainless steel tube.. Material Made of aluminum alloy 6061-T6, the working temperature range is from -65 to 252.. Function The nut is used for the conversion of the alloy pipe and the fitting,the sleeve is used to fix the pipe and prevent it from moving, and the sleeve is sealed with a 37 degree and an outer flaring of the pipe.. InstallationNeed to install the tube nut and sleeve on the tubing first.Then use a 37 flaring tool to flare the end of the coiled aluminum stainless steel tube.Professional installation recommended.. Application Widely used in engine modification, refueling system, fuel system, brake system, cooling system..

Size6AN Male Flare to 6AN ORB, thread size is 916-18 UNF. The side of AN is a 37 degree angle flare fitting and the ORB side is an O-ring.. MaterialThe fitting is manufactured from high-quality aluminum alloy 6061-T6. Polish and anodized surface used for corrosion protection, strong strength and durability. The o-ring is made of NBR rubber, features with excellent heat-resisting to help better seal. It can be reused and recycled.. Widely ApplicationThe AN male port fits fuel cooler, fuel tank, fuel pump and fluid Line, allows connection of female thread fittings.. FeaturesWork temperature -65F to 252F Max pressure 1500PSI.. Easy to Install screw fitting into mating part. Tighten fitting with aluminum adjustable wrench until snug. Check ORB fitting for leakage before start up. Re-tighen it if leaking..

Full Customization in One Kit This 23-piece kit includes 10x 6AN PTFE fittings 04590180, 4x male fittings, 4x hose separator clamps and exclusive wrench protectors Hose Reaming Tool. Mechanics-approved 92 of jobs completed with just 1 box. No more last-minute car tuning shop runs.. Say Goodbye to Leak CNC-machined from high quality aluminum not cheap cast metal, our 37 sealing angle 6AN PTFE fuel line fittings create strong seals. Built to withstand high pressure high temperature builds.. Hassle-free Installation 360 ptfe swivel hose end fittings lets you rotate fittings like a ball joint. All threads meet standard specs, compatible with 95 of AN brands. Unique to us PTFE hose assembly tool ensures fully hose-to-ferrule contact, stopping 80 of leaks caused by DIY hose prep.. Exclusive Wrench Protectors Scratched AN fittingsCorrosionWaste fuel system investment. Our AN Fittings wrench protector absorb 70 torque stress while protecting anodized fittings surfaces. Only included in BRIFITOR kits. Notes AN wrench is not included in this kit, you can buy it on our store.. Versatile Application Our 6AN PTFE fuel line kit mostly used in EFI LS system, fuel injection system, transmission system, oil cooler system, turbocharger system, ls engine swap, etc. Compatible with automotive fuelslubricantscoolantE85.. Notes Our AN fittings are CNC-machined to exacting standards, rigorously tested to ensure quality within our system. Manufacturing tolerances can vary between brands, you may encounter fitment challenges with third-party components. For optimal performance, recommend to use components from our brand..

Fit for all stainless braided and nylon braided hose,Not fit for PTFE fuel line and rubber fuel line.. Material T-6061 Lightweight Aluminum Alloy, Anodized Finish for Durability. Application Universal,such asOil Fuel Water Fluid Air Line. Swivel design for easy assembly,The adjustable AN wrench is highly recommended.. Package include4X Straight Swivel Fuel Hose End.

Size The thread size of 6an is 916-18 UNF.. Parameter Max Working Pressure 4000PSI. Working Temperature Range -65 to 252 .. Material Aluminum alloy 6061-T6, anodized black surface.. Seal The AN flare is sealed by a 37 degree angle.. Application Widely used in fuel systems, such as fuel hose extends, return line, fuel cell, firewall, etc..

JIC -6 AN male and 2 x 6AN male thread 916-18 flare coupling Y block adaptor fittings, black anodized. CNC-machined from high performanc lightweight 6061-T6 billet aluminum alloy. Hard-anodized coating is compatible with alcohol, exotic fuel-additives, water and oil. One-piece design is compact and lightweight, high flow capacity, Y-Blocks feature AN Style Male inlets and outlets. Ensures the most direct path for unrestricted and redirected flow.

Size The thread size of 6an is 916-18UNF. The ID of spring lock is 38 inch and 516 inch.. Seal The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.. Parameter Working pressure 1500psi, Temperature range -40F to 176F.. Material Made of aluminum alloy 6061-T6. Spring lock is made of plastic.. Application Widely used in engine fuel rail, ls swap, transmission cooler, return line, fuel sensor, etc..

JIC -6 AN x AN6 x 6AN male flare 916-18 thread Y block adaptor fittings, black anodized finish. One-piece design is compact and lightweight, high flow capacity, Y-Blocks feature AN Style Male inlets and outlets. Hard anodized coating is compatible with alcohol, exotic fuel-additives, water and oil. This eliminates leaks due to poor solder joints or leaky O-rings due to CNC manufacturing process, 6 AN Male to AN6 Male Coupling Union Adaptor. Made of one-piece lightweight 6061-T6 billet aluminium.

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp and 6an braided fuel line Length 20 Feet. Hose ID 0.31. Hose OD 0.56inch.. The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

The 6an braided fuel line kit can be compatible with 4L60E 4L65E Transmisson cooler.. The Hose ID 0.31. Hose OD 0.56.Length 15 Feet.Minimum bending radius63.5mm.. The hose Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 4pcs 6an swivel hose ends 2pcs straight, 2pcs 90degree,2pcs 6an hose separator clamp, 2pcs 6AN to 14NPT fittings, 2pcs 6AN 916-18 UNF Male Flare to 14-18 NPSM and 6an braided fuel line Length 15 Feet.. The hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose adapters are made of high-performance aluminum alloy..

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 6pcs 6an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 6an hose separator clamp,2pcs 6an to 6an Fitting and 6an braided fuel line Length 10 Feet. Hose ID 0.31. Hose OD 0.56inch.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

The thread size of 6AN is 916-18 UNF. The AN side is sealed by a 37 degree angle.. Made of aluminum alloy 6061-T6. The swivel fitting is only work with stainless braided and nylon braided hose.. Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. 360 Swivel design for easy assembly. It can be reused and recycle..

Size AN6916-18 UNF Male to 516 Hose Barb. Includes aluminum adapter 1, bulkhead nut 1, rubber washer 2. Material Built with sturdy 6061-T6 aluminum alloy, the fuel tank male adapter is black anodized to be oil, rust, and corrosion-resistant. Sealing The AN side is sealed by a 37-degree angle. Fitment Work with rubbernylonplastic fuel lines. Application It's suitable for fuel tanks and fuel cells.

Size ID of 6an fuel hose0.318mm,OD0.5614.3mm.Length10ft.. Parameter Working pressure750psi,burst pressure2250psi Temperature range-22F to 248F 30C to 120CMin bending radius63.5mm.. Application 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.. Material 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

Size 6AN fuel hose ID 0.31 OD 0.56. 8AN fuel hose ID 0.41 OD 0.65.. Parameter Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Application Braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Medium Nylon and stainless steel braided fuel hose kit compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Kit Includes 6AN Fuel Hose Kit 1PC and 8AN Fuel Hose Kit 1PC as shown..

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 6pcs 6an hose separator clamp,2pcs 6an to 6an Fitting and 6an braided fuel line Length 20 Feet. Hose ID 0.34. Hose OD 0.54inch.. 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Size The 6AN hose ID 0.31 inch hose OD 0.56 inch. Length 20 feet.. Parameter Maximum working pressure of this 6AN steel braided hose 750 PSI burst pressure 2,250 PSI. Temperature range -22F to 248F. Minimum bend radius 2.5 inches.. Material The 6AN stainless steel fuel line is made of a CPE rubber inner layer, and a braided 304 stainless steel outer layer. The hose fittings are made of tough aluminum alloy, and the gloves featuring a nitrile coating that offer maximum protection.. Package Includes The package includes 10PCS of 6AN swivel hose ends 4PCS straight, 2PCS 45-degree, 2PCS 90-degree and 2PCS 180-degree, 2PCS hose separator clamps, one 6AN stainless steel braided hose, one installation tool and a pair of gloves.. Compatibility The 6AN fuel line kit is compatible with transmission fluid, race gas, vacuum, hydraulic fluid, diesel, and fuel..

Package Dimensions 0.762 cms L x 3.302 cms W x 13.97 cms H. Product Type Auto Part. Package Quantity 1. Country Of Origin China.

Package Dimensions 2.032 H x 8.89 L x 15.494 W centimetres. Country of Origin China. Package Weight 0.022 kilograms. Part Number 21906.

Precision Fit and Seal experience precision with the 6AN fitting, featuring a 916-18 UNF thread size and a 37-degree angle seal. Versatile Hose Compatibility this swivel fitting is nice for those working with stainless steel braided and nylon braided hoses It ensures seamless integration, enhancing application versatility across different projects. Durable Aluminum Construction crafted from 6061-T6 aluminum alloy, this 6AN 90-degree fitting promises durability and longevity. Impressive Performance Parameters built to handle up to 1, 500 PSI and a wide temperature range from -65 to 252 -53 to 122, this fitting meets demands for performance under diverse conditions. Convenient Swivel Design enjoy the ease of assembly with the 360 swivel feature, making installation a breeze This fitting is both reusable and recyclable.

Specifications AN6 male to AN6 male flare, thread size 916-18 UNF.. High-Efficiency Fuel Splitter This Y-block fitting enables efficient fuel distribution, splitting a single AN6 fuel line into two AN6 outputs or merging two AN6 inputs into a single output.. Superior Sealing Utilizing 37 flared sealing technology, it delivers reliable sealing performance in harsh environments.. Durable and Robust The fitting body is crafted from high-strength 6061-T6 aluminum alloy and undergoes anodized treatment, which not only enhances surface hardness but also provides resistance against fuel, moisture, and chemical corrosion.. Service Prioritizing Your Shopping Experience. Devoted to Supplying Top Products and Excellent Service, Contact Us for Swift and Dependable Replies..

Size AN6 916-18 UNF male flare to 14-18 NPSM. Broad Compatibility The 6an to 14 npsm transmission cooler fittings are intended to replace OEM adapters in 700R4, 4L60E, TH350, TH400, 200-4R, TR6060, AOD, 4R70W, 4R100, C5, and other applications that use 14 NPSM threads.. Premium Quality 6an transmission cooler fitting constructed from lightweight 6061-T6 aluminum, the surface is finished with black anodizing, making it strong, durable, and resistant to corrosion.. Versatility The 6an fitting and adapters are highly compatible with various media, including fuel, oil, water, and others.. Advantages Featuring sealing washers, these 6 an fittings use straight threads instead of tapered ones. This design enables you to connect your braided line to your transmission case without risking cracks in the case..

Application Universal for any use with AN6 adapter fitting. Also fit for Transmission TH350, TH400, 4L60E, 4L80E, 700R4, 200-4R, TR6060, Ford AOD 4R100, 4R70W, and C5.. Function Improve the transmission cooling efficiency of your daily driver and add transmission cooling capabilities for towing or hauling in your truck or SUV.. Extend for Use Life Adding an appropriate-sized transmission cooler will help extend the life of your unit by avoiding heat-related failure.. Superior Material Made of Stainless Steel and PTFE, it combines durability and longevity with flexibility, corrosion resistance, stronger seam, and no leakage.. Customer Service Our products adopt professional manufacturing technology, exquisite workmanship, unique design, stable performance, and high reliability. Our products allow you to use and purchase with confidence. If you want to know more details about the product parameters, you can send an email or ask questions through QA..

Wide ApplicationsThe swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with all CPE stainless braided and nylon braided hose. They are not compatible with PTFE hose, E85, rubber hose. High Quality MaterialThe female AN Straight swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. Can be suitable for competition applications where reduced weight is needed. Easy to UseThe swivel hose end are easy to install, We normally recommend a bit of assembly lube to help prevent any galling.That gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. Rotatable DesignThese new swivel hose ends swivel 360 to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place. Quality ServiceWe provide a Two-month Return ServiceWhen You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You.

Widely ApplicationIt's suitable for Oil cooler fuel tank fuel pump fuel hose line,which can work with alcohol and other peculiar fuel additives, water and oil Compatible. Size 6AN Male to 6AN Male,The thread size of the 6AN is 916-18 UNF. Seal The AN thread of the flare is sealed by a 37-degree angle. High Quality MaterialThe Fitting is made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Quality ServiceWe provide a Two-month Return ServiceWhen You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You.

Size The fitting is female AN6 to female AN6, and the thread size is 916-18 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40 to 250.. Sealing The AN side of the flare is sealed by a 37-degree angle.. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Feature The fitting is designed with a 360 swivel for easy assembly, and it can be reused and recycled..

Edelbrock's RD staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket - they live it - and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature.. Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team.. Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.. In a day and age where we are seeing more products sent overseas to be manufactured, Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities.. Edelbrock facilities have earned the world recognized ISO 90012008 registration for quality.. Fit type Vehicle Specific.

Package Included 2PCS 6AN 90 Degree Swivel Hose End Fittings.. Thread size of 6AN 916-18 UNF. The AN side is sealed by a 37 degree angle.. Material 6061-T6 aluminum alloy.. Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. Compatible with nylon braided CPE fuel hose. Not for PTFE hose, E85, rubber hose..

Package include 2PCS 6AN Male Flare to 516 Inch Hose Barb Fittings. High-Quality Construction Manufactured from lightweight 6061-T6 billet aluminum with an anodized finish for superior strength, durability, and corrosion resistance.. Leak-Free Performance Precision-machined 37 sealing angle ensures a secure and reliable seal even under maximum operating pressure.. Wide Application AN to barb fittings are suitable for various automotive fluid systems including fuel, oil, diesel, and water lines.. Fuel Compatible Fully compatible with gasoline and alcohol-based fuels such as E85, ensuring dependable performance in demanding environments..

Package include 4pcs 6AN Straight Push Lock Hose Fitting. 6AN to 38 inch barb. Thread size of 6an 916-18UNF. The barb fitting only work with rubber fuel line. Material 6061-T6 aluminum alloy. Working pressure 1500PSI. Temperature range -40 to 248. Easy to install. It is recommended to use clamps to enhance sealing.

Package Included 2PCS 6AN to 6AN Male Flare Coupling Union Adapter. Thread size of 6AN male coupler is 916-18 UNF, can use to splice or extend a line, works with female thread fitting.. Work temperature -65 to 252 degree F. Max pressure 1500 PSI. Ultimate torque 25N.. Works with swivel fitting, push lock fitting and female AN fittings. Please match the correct size.. For fuel system, such as fuel hose extend, line connect to fuel filter, fuel pump and cooler system..

Nylon Braided CPE Fuel Line Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.. Universal Application The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Safety Features For Your Protection Fuel Hose SizeID 6AN, Length 20FT, Working Temperature -100 to 500 -73C to 260C , Pressure Tolerance 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. Package Includes 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..

Female to Male Swivel Fitting Size female AN6 to male AN6 916-18 UNF thread pipe connectors, 90 degree elbow flare union.. Advantage the swivel 360 elbow design allows you to get things reasonable tight while still maintaining the swivel functionality so that you can ensure a proper connection and positioning before doing that final tightening down to lock everything into position.The swivel fitting has 37-degree AN sealing angle design assures leak free performance.. The 6an swivel fitting can be used with fuel, oil, gas, fluid, Water.. The femalemale swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. Can be suitable for competition applications where reduced weight is needed.. The AN adjustable wrench is highly recommended. Six-month warranty provide by EVIL ENERGY .We value your shopping experience and strive to offer a high-quality product and service..

The female AN6 straight swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. Can be suitable for competition applications where reduced weight is needed.. 6AN swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line ,clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose .. These new full flow swivel hose ends swivel 360 to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place.. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling.. EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..