Size The thread size of 6an is 916-18 UNF.. Seal The AN flare is sealed at a 37 degree angle.. Parameter Max Working Pressure 1500 PSI. Working Temperature Range -65 F to 252 F.. Material Made of aluminum alloy 6061-T6, anodized black surface.. Function The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters..

Size The thread size of the 6AN fitting is 916-18 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252-53 to 122. Feature The 6AN 90-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size This fitting is 6AN to 38 barb. The thread size of the 6AN end is 916-18 UNF. Application The barb fitting works only with rubber fuel lines. Parameter Maximum working pressure 1,500 PSI. Temperature range -40 to 248. Material The 90-degree fitting is made of 6061-T6 aluminum alloy. Installation This 6AN 90-degree fitting is easy to install. It is recommended to use clamps to enhance sealing.

Fuel Pressure Take-off Fitting The fuel pressure take-off fitting is an AN6 male to -6 female with a 18 NPT gaugegage port. The thread size of the 6AN is 916-18 UNF.. Sealing The AN thread of the flare is sealed at a 37-degree angle, and the NPT thread is sealed with a 60-degree taper. It is highly recommended to use sealant or PTFE polytetrafluoroethylene tape on the NPT port.. Material The fitting is made of 6061-T6 aluminium alloy.. Parameter The maximum working pressure is 1,500 PSI. The working temperature range is -40F to 250F.. Application The fitting is widely used in fuel systems to add a fuel pressure gauge or sensor between fuel lines..

Size Thread Size of 6AN PTFE Fitting is 916-18UNF.. Application The PTFE Hose End only work with PTFE fuel line.. Parameter Working pressure 1500PSI. Temperature range -65F-252F.. Seal The AN side is sealed by a 37 degree angle.. Material and Feature Made of aluminum alloy 6061-T6. 360 Swivel design for easy assembly..

Size Thread Size of 6AN PTFE Fitting is 916-18UNF.. Application The PTFE Hose End only work with PTFE fuel line.. Parameter Working pressure 1500PSI. Temperature range -65F-252F.. Seal The AN side is sealed by a 37 degree angle.. Material and Feature Made of aluminum alloy 6061-T6. 360 Swivel design for easy assembly..

Size The thread size of the AN6 hose end is 916-18 UNF. It is only compatible with 6AN stainless steel and nylon braided hoses. The ID of the 6AN line clamp is 0.51 inch 12.9 mm. Material The fitting is made of 6061-T6 aluminum alloy with a black anodized surface. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252. Function The 6AN swivel hose end kit includes multiple angled fittings and 6AN unions to meet various installation requirements. The 6AN separator clamp is used to secure and organize lines, keeping your project clean and organized. Application It is widely used in transmission lines, fuel filters, fuel injection systems, cooling systems, and more.

Size This fitting is 6AN to 38 barb. The thread size of the 6AN end is 916-18 UNF. Application The barb fitting works only with rubber fuel lines. Parameter Maximum working pressure 1,500 PSI. Temperature range -40 to 248. Material The 90-degree fitting is made of 6061-T6 aluminum alloy. Installation This 6AN 90-degree fitting is easy to install. It is recommended to use clamps to enhance sealing.

Package include4X Straight Swivel Fuel Hose End.During the installation,the included accessory o-ring is not a must.Whether it can be used or not depends on your own need.Choosing not to use it won't influence the subsequent installation.. INDUSTRIAL QUALITYThe female AN6 fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength.. UNIQUE DESIGNSwivel design for easy assembly,Please select the corresponding wrench to use.4AN-4S wrench 6AN-6S wrench 8AN-8S wrench 10AN-10B wrench.. Wonderful for universal use6AN swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our 6AN fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose,rubber hose.. ServiceIf you have questions of our female AN6 swivel fittings,you can contact us.We value your shopping experience and strive to offer a high-quality product and service..

Size 6AN female to 38 inch, the thread size of the 6 AN is 916 UNF. Fits to 38 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 38 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. Note Only applicable to stainless steel or aluminum hardline..

Size The thread size of the 6AN fitting is 916-18 UNF. The AN side is sealed at a 37-degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252 -53 to 122. Feature The 6AN 90-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size The thread size of the 6AN fitting is 916-18 UNF. The threaded end is sealed at a 37-degree angle. Feature The profile of the hose end is more compact and is suitable for tight spaces. Application The hose fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy. The bending part is produced through a forging process. Parameter Maximum working pressure 1,500 PSI. Working temperature range -40 to 250 -40 to 121.

Size The thread size of the 6AN male coupler is 916-18 UNF.. Seal The AN thread of the flare is sealed by a 37-degree angle.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The coupler is made of aluminum alloy 6061-T6.. Application The male-to-male flares coupler is usually used in fuel systems, such as extending fuel hoses, connecting lines to fuel pumps, and cooler systems..

Size The fitting is an AN6 to 14 NPT adapter, and the thread size of the 6AN is 916-18 UNF.. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Sealing The AN side of the flare is sealed at a 37-degree angle, and the NPT thread side is sealed with 60-degree tapered threads.. Application The fitting is widely used in fuel systems, cooling systems, power steering systems, and more.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. The fitting allows easy installation and removal with a wrench..

Size 6AN male flare to 38 inch, the thread size of the 6 AN is 916 UNF. Fits to 38 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 38 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. NoteOnly applicable to stainless steel or aluminum hardline..

Size The bulkhead fitting thread size of 6an is 916-18 UNF, 90 degree. Parameter Max Working Pressure 1500PSI. Working Temperature Range -63 to 252 . Material Aluminum alloy 6061-T6, anodized black surface.. Seal The AN flare is sealed by a 37 degree angle.. Application Widely used in fuel systems, such as fuel hose extends, return line, fuel cell, firewall, etc..

AN6 916x18 UNF aluminum tube nut and sleeve assembly, suitable for 38 outside diameter hardline tubing. Package includes two nuts and two sleeves. Manufactured from lightweight 6061-T6 billet aluminum Anodized finish for strength, durability and anti-corrosion. These AN hardline tube nut and sleeve provide a AN JIC connection to the end of aluminum tubing. Notice your hardline tube end will need to be flared at 37 degrees using a flaring tool.

Size The AN6 female to male fitting has a thread size of 916-18 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is from -40 to 250.. Sealing The AN side is sealed at a 37-degree angle.. Material The fitting is made of aluminum alloy 6061-T6.. Feature The fitting features a unique cutter style and a one-piece full-flow design for smoother flow..

Size The thread size of 6an is 916-18 UNF.. Material Aluminum alloy 6061-T6.. Seal The AN flare is sealed at a 37 degree angle.. Parameters Working Pressure 1500PSI. Temperature range -40F to 250F.. Application AN6 tee fitting can work with oil, fuel, e85, fluid, coolant and air..

Size The thread size of the 6AN is 916-18 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The fitting is made of aluminum alloy 6061-T6 with a black anodized surface.. Seal The AN side of the flare is sealed by a 37-degree angle.. Feature The 360 swivel design makes it easy to install and helps save time..

Size The thread size of 6an is 916-18UNF. The ID of the screw is 38 inch.. Seal The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.. Parameter Working pressure 1500psi Temperature range -40F to 250F.. Material Made of aluminum alloy 6061-T6.. Application Widely used in engine fuel rail, ls swap, transmission cooler, return line, fuel sensor, etc..

Size The fitting is female AN6 to female AN6. The thread size is 916-18 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40 to 250.. Sealing The AN side of the flare is sealed by a 37-degree angle.. Material The fitting is made of aluminum alloy 6061-T6 with a black anodized surface.. Feature The fitting is designed with a 360 swivel for easy assembly, and it can be reused and recycled..

Size AN6 916-18 UNF male flare to 38 inch 9.5mm push on hose barb, Pack of 2. Manufactured from lightweight 6061-T6 billet aluminum Anodized finish for strength, durability and anti-corrosion. 37 sealing angle guarantees a positive seal at maximum operating pressure. These AN to barb fittings are suitable for a wide range of automotive applications including Fuel, oil, diesel or water lines. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Thread Size The thread size of 6an is 916-18 UNF,tube sleeve used to 38'' OD stainless steel tube.. Material Made of aluminum alloy 6061-T6, the working temperature range is from -65 to 252.. Function The nut is used for the conversion of the alloy pipe and the fitting,the sleeve is used to fix the pipe and prevent it from moving, and the sleeve is sealed with a 37 degree and an outer flaring of the pipe.. InstallationNeed to install the tube nut and sleeve on the tubing first.Then use a 37 flaring tool to flare the end of the coiled aluminum stainless steel tube.Professional installation recommended.. Application Widely used in engine modification, refueling system, fuel system, brake system, cooling system..

Size The thread size of the AN6 hex thread plug fitting is 916UNF.. Seal the ORB is sealed with an O-ring.. Parameter Working pressure 1500psi Working temperature -65F-252F O-ring can withstand temperature 122F-140F.. Material Made of aluminum alloy 6061-T6 and NBR rubber.. Application Widely used in fuel rail, fuel pressure regulator, radiator, etc..

MaterialMade of 304 stainless steel.. SizeThread size of 6an weld bung is 916-18 UNF.. Max pressure1000PSI68.94bar,Operating temperature - 65 to 252.. Sealingthe AN side of the flare is sealed by a 37 degree angle.. After welding, it needs three hours of natural cooling before use. Professional installer is recommended..

Full Customization in One Kit This 23-piece kit includes 8x 6AN barb fitting 04590180, 8x hose clamps, 4x male fittings, 2x hose separator clamps exclusive AN fittings wrench protectors. Mechanics-approved 92 of jobs completed with just 1 box. No more last-minute car tuning shop runs.. Say Goodbye to Leak Precision-machined from high quality aluminum, our 37 sealing angle 6an push lock hose fittings create perfect seals. 360 barbed teeth dig into hose liners, creating a mechanical grip 3X stronger than other push lock fittings.. Hassle-free Installation Just push the hose over the barbed end, the teeth self-guide for perfect alignment, 50 faster than regular AN fittings. Included stainless hose clamps grip 2X tighter, no more blown hoses. Ideal for NBR rubber push lock fuel hose use.. Exclusive Wrench Protectors Scratched AN fittingsCorrosionWaste fuel system investment. Our AN wrench protector absorb 70 torque stress while protecting anodized fittings surfaces. Only included in BRIFITOR kits. Notes AN wrench is not included in this kit, you can buy it in our store. Versatile Application Our 38 NBR push lock fuel hose kit only works with rubber hose on hydraulic system, transmission, fuel filter, fuel injection system, oil cooling system, marine fuel line, etc. Not compatible with PTFE or CPE hoses see description for hose requirements.. Notes Our fittings are CNC-machined to exacting standards, rigorously tested to ensure quality within our system. Manufacturing tolerances can vary between brands, you may encounter fitment challenges with third-party components. For optimal performance, recommend to use components from our brand..

Size Thread size of 6an weld bung is 916-18 UNF.. Material Made of aluminum alloy 6061-T6.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. Parameter Max pressure 1000PSI68.94bar, Operating temperature - 65 to 252.. Note Can not be screwed too tightly when using, otherwise it will deform the 37 degree valve seat and cause leakage..

Size AN3 38-24 UNF stainless steel bulkhead adapter with nut, straight. Manufactured from 304 stainless steel. These bulkhead adapters provide an easy way to securely connect your lines together through firewalls, panels, etc. Compatible with fuel, oil, brake fluids, unleaded petrol, methanol water. All Podavelle fittings and adapters are precision CNC machined to the highest standard for a durable, tight, secure and leak free connection.

Size The thread size of 6an is 916-18 UNF.. Parameter Max Working Pressure 4000PSI. Working Temperature Range -65 to 252 .. Material Aluminum alloy 6061-T6, anodized black surface.. Seal The AN flare is sealed by a 37 degree angle.. Application Widely used in fuel systems, such as fuel hose extends, return line, fuel cell, firewall, etc..

Size The bulkhead fitting thread size of 6an is 916-18 UNF, 90 degree full flow style.. Parameter Max Working Pressure 1500PSI. Working Temperature Range -63 to 252 . Material Aluminum alloy 6061-T6, anodized black surface.. Seal The AN flare is sealed by a 37 degree angle.. Application Widely used in fuel systems, such as fuel hose extends, return line, fuel cell, firewall, etc..

AN6 flare 916x18 male thread to 516 inch barb fuel line hose adapters with 1 ptfe spacers. Material High performance light weight 6061-T6 billet aluminium. Black anodized finish for durability, and long last. Fit. such as Oil Fuel Water Fluid Air Line. All our aluminum fittings and adapters are fully compatible with gasoline and alcohol based fuels.

AN-06 male fuel cell fitting with oil-resistant washers and nut, suitable for most fluids. CNC-machined from 6061-T6 lightweight aluminum material. Black anodized for great appearance and anti-corrosion. Connect fuel lines to fuel cells, radiused entries for unrestricted flow. All our aluminum fittings and adapters are fully compatible with gasoline and alcohol based fuels.

JIC -6 AN male thread 916-18 to 516 hose barb adapters fuel cell tank fitting. Includes 1 bare aluminum fitting, 1 bare aluminum bulkhead nut, and 2 washers. Constructed of 6061 T6 aircraft grade lightweight aluminum material. Anodized finish. Perfect way to transition from tubing to hose. Positive leakfree seal. Provides an aggressive look for your engine, Last twice as long ad traditional anodized fitting.

Size AN6916-18 UNF Male to 516 Hose Barb. Includes aluminum adapter 1, bulkhead nut 1, rubber washer 2. Material Built with sturdy 6061-T6 aluminum alloy, the fuel tank male adapter is black anodized to be oil, rust, and corrosion-resistant. Sealing The AN side is sealed by a 37-degree angle. Fitment Work with rubbernylonplastic fuel lines. Application It's suitable for fuel tanks and fuel cells.

Premium MaterialFemale 6AN to 516 inch push on hose barb connector is made of high performance lightweight 6061-T6 CNC machined billet aluminum material for better durability. Widely Used6AN 516 Hose Barb Adapters fuel line fittings is suitable for fuel system such as fuel hose line fitting, fuel pump, fuel filter and can work with all kinds of fulid-oil, Desiel, Petrol, Water. Excellent WorkmanshipEach component of 6an straight fitting is precision-machined to exact tolerances for trouble-free performance, ensure accurate thread engagement. High Work Efficiency6an to 516 barb have excellent sealing capacity, leak-free connections and black anodized finishing treatment. Worry Free After SaleIf our 6an fitting fails to deliver on what you expect of it simply return it and we will try to meet your need.

Specifications The thread size of this bulkhead fitting including the main body and lock nut is AN6 916-18 UNF.. Thickness Adaptability Forms a seal in panelbulkhead thicknesses ranging from 1 mm to 8 mm, suitable for engine compartmentfirewall penetration.. Easy Installation The fixed locking nut can rotate freely on the threaded body. Both sides feature hexagonal flats, enabling one-handed installation in confined spaces.. Reliable Sealing The 37flared end fits AN specification pipes perfectly, effectively preventing fluid leakage. High-strength aluminum and anodized treatment enable it to function normally in harsh environments.. Service Prioritizing Your Shopping Experience. Devoted to Supplying Top Products and Excellent Service, Contact Us for Swift and Dependable Replies..

JIC 6 AN fuel cell bulkhead fitting with an bulkhead lock nut and 2 pcs washers. Constructed of 6061 T6 aircraft grade lightweight aluminum material. Each component is CNC-machined for precision fit and unmatched flow. More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. All fittings are fully compatible with gasoline and alcohol based fuels.

Size AN6916-18 UNF Male to 516 Hose Barb. Includes aluminum adapter 1, bulkhead nut 1, rubber washer 2. Material Built with sturdy 6061-T6 aluminum alloy, the fuel tank male adapter is black anodized to be oil, rust, and corrosion-resistant. Sealing The AN side is sealed by a 37-degree angle. Fitment Work with rubbernylonplastic fuel lines. Application It's suitable for fuel tanks and fuel cells.

Specification AN6 fuel cell fitting with Teflon washers and nut. Material Made of High-Quality Lightweight 6061-T6 Aluminum Material. Surface Treatment Anodized Finish for Strength and Durability. Works with all braided or nylon braided lines. Easy to Install Easy Installation, minimal time. 100 Satisfaction If you are not satisfied with our fule cell fitting, please contact us, we will try our best to solve your problem.

Size 6AN916-18 UNF of thread size. Sealed by a 37 degree angle.. Material The bulkhead fitting and locking nut are made of high performance aluminum alloy 6061-T6, which is resistant to high pressure and high temperature for strong strength and good durability. Black anodized surface can be used for anti-corrosion and rust-proof, serving for a long time. The 2 washers are manufactured by oil resistant and sturdy PTFE material.. Application Designed to connect fuel systems, such as fuel hose extends, return line, fuel cell, fuel tank, firewall, etc. Compatible with gasoline, alcohol based fuels, water, fluid, airline.. Max Working Pressure 4000PSI. Working Temperature Range -65 to 252 .. Tips It is recommended to use adjustable wrench, tighten the locking nut until snug to prevent leakage..

6AN to 6AN male thread flare bulkhead pipe adapter with an6 bulkhead nut, straight. Manufactured from high performance lightweight 6061-T6 cnc machined billet aluminum. Surface treatment black anodized finish for long last, durability and strength. Designed to ensure the reliability required in a high pressure steering system. Each component is precision-machined to exact tolerances for trouble-free performance.

Size 6AN male flare bulkhead tee on run adapter, with bulkhead nut. Material Made of high performance lightweight 6061-T6 cnc machined aluminum. Color Black anodized finish for durability, and long last and 37-degreeANsealing angle makes a positive seal. To Connect Three -6 AN Female Fittings Together, Precision machined to exacting tolerances for trouble-free performance. All KRD PERFORMANCE fittings and adapters are fully compatible with gasoline and alcohol based fuels. Reusable.

Type -6AN male flare Bulk Head to 516 hose barb adapter.. Material Made from 6061 T6 Aluminum.. Fitment Works well with rubber and plastic nylon fuel lines.. Function - Designed to provide a leak free seal with any manufactures fittings. Great for fuel tanks and fuel cells. Eliminates 2 extra fittings from being needed to run fuel to the bulkhead.. Package Includes 2x bare aluminum fitting 2x bare aluminum bulkhead nut 4Pcs Teflon washers..

Type -6AN male flare Bulk Head to 516 hose barb adapter.. Material Made from 6061 T6 Aluminum.. Fitment Works well with rubber and plastic nylon fuel lines.. Function - Designed to provide a leak free seal with any manufactures fittings. Great for fuel tanks and fuel cells. Eliminates 2 extra fittings from being needed to run fuel to the bulkhead.. Package Includes 2x bare aluminum fitting 2x bare aluminum bulkhead nut 4Pcs Teflon washers..

Accurate Fitting Diameter 6 AN male to 516 barb fule fitting adapter. Dimension 57x21mm 2.24x0.83LD, Inner Hole Diameter 1 7mm 0.28, Inner Hole Diameter 2 8mm 0.31. About Material Made of durable aluminum alloy with black anodized finish for durability and strength, intended for long service life.. Information Features Designed for smooth flow with tight and leakproof connections.. Nice Universal fit Can be widely used for most automotive needs, such as gas, oil, fuel, water, fluid, air line in cars.. Attention Package Includes 2 x Fuel Line Fitting.

Precision 6AN Male-to-Male Bulkhead Fitting AN6 916-18UNF male flare, straight. Aluminum Construction Manufactured from lightweight 6061-T6 aluminum. Anodized finish for strength, durability and anti-corrosion. 37 Flare Sealing Surface for vibration-proof connections. Extreme Environment Ready These bulkhead fittings allow lines to pass safely and securely through firewalls and body panels. Universal AN Fitting for Builds Fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Material Bulkhead fuel fitting adapter made of quality material aluminum alloy. The black anodized finish provides durability and strength to prevent corrosion and reduce normal wear and tear on straight bulkhead flares while giving the part a smooth appearance.. Fitment Straight bulkhead flare is widely used in diesel, water, air, fuel lines, etc. Bulkhead fitting is suitable for automotive, industrial, marine and more.. Good Performance Straight bulkhead fuel fitting securely connects lines together through firewalls, panels, and more. Straight aluminum alloy bulkhead fittings feature an AN seal angle design for leak free performance.. Features Designed for smooth flow with tight and leakproof connections.. Package Included 1 x Male Straight Bulkhead Flare Fitting Union Adapter.

Specifications AN6 to AN6 Male Flare, thread size 916-18 UNF, fits 38-inch outer diameter piping.. Application This fuel oil tank fitting is commonly used for sealing connections in pipes that pass through bulkheads, great for oil return line, fuel cell.. Design AN specification 37 tapered flare, combined with double sealing gaskets, ensures leak-free transmission of high-pressure fluids such as hydraulic oil and fuel.. Material Made of high-strength T6061 aluminum alloy, with anodized surface treatment for greater durability and oxidation resistance.. High-Quality Service Prioritizing Your Shopping Experience. Devoted to Supplying Top Products and Excellent Service, Contact Us for Swift and Dependable Replies..

Gasket and nut for air tight seal through bulkhead.. Joywayus female coupler for connecting 14 NPT fittings through a bulkhead.. Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F.. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.. This bulkhead fitting is suitable for connecting brass, bronze, or iron hydraulic lines through a bulkhead..

Size 18 NPT Female to -6 ORB Male. Please buy according to the size of NPT in the picture.. Black Anodized Finish for Durability and Strength. Quality assurance tested to ensure top quality. Made of High Performance Lightweight 6061-T6 CNC Machined Billet Aluminum Material.. Precision machined to exacting tolerances for trouble-free performance.

Widely ApplicationIt's suitable for Oil cooler fuel tank fuel pump fuel hose line,which can work with alcohol and other peculiar fuel additives, water and oil Compatible. Size 6AN Male to 6AN Male,The thread size of the 6AN is 916-18 UNF. Seal The AN thread of the flare is sealed by a 37-degree angle. High Quality MaterialThe Fitting is made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Quality ServiceWe provide a Two-month Return ServiceWhen You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You.

Package include 4pcs 6AN Straight Push Lock Hose Fitting. 6AN to 38 inch barb. Thread size of 6an 916-18UNF. The barb fitting only work with rubber fuel line. Material 6061-T6 aluminum alloy. Working pressure 1500PSI. Temperature range -40 to 248. Easy to install. It is recommended to use clamps to enhance sealing.

Package Included 2PCS 6AN to 6AN Male Flare Coupling Union Adapter. Thread size of 6AN male coupler is 916-18 UNF, can use to splice or extend a line, works with female thread fitting.. Work temperature -65 to 252 degree F. Max pressure 1500 PSI. Ultimate torque 25N.. Works with swivel fitting, push lock fitting and female AN fittings. Please match the correct size.. For fuel system, such as fuel hose extend, line connect to fuel filter, fuel pump and cooler system..

Size Thread size 6an is 916-18 UNF.. Material Aluminum alloy 6061-T6, anodized surface. Parameter Working Pressure 1500 PSI. Working Temperature Range -65 to 252.. Seal The AN flare side is 37 degree angle sealed. Usage Widely apply for fuel systems, such as fuel hose extends, return line, fuel cell, firewall, etc.

90 Degree -6 AN to -6 AN 916x18 male thread flare bulkhead pipe adapter with an6 bulkhead nut. Manufactured from high performance lightweight 6061-T6 cnc machined billet aluminum. Surface treatment black anodized finish for long last, durability and strength. Designed to ensure the reliability required in a high pressure steering system. Each component is precision-machined to exact tolerances for trouble-free performance.

90 degree one piece full flow -6 AN to -6AN male thread flare bulkhead pipe adapter, with 2 pcs AN6 Bulkhead Nut. Manufactured from high performance lightweight 6061-T6 cnc machined billet aluminum. Surface treatment black anodized finish for long last, durability and strength. Designed to ensure the reliability required in a high pressure steering system. Each component is precision-machined to exact tolerances for trouble-free performance.

Straight. -6AN Male Flare to -6 AN Male Flare Bulkhead 916x18 Thread Aluminum Fittings with AN6 Bulkhead Nut. Manufactured from high performance lightweight 6061-T6 cnc machined billet aluminum. Surface treatment black anodized finish for long last, durability and strength. Designed to ensure the reliability required in a high pressure steering system. Each component is precision-machined to exact tolerances for trouble-free performance.

High Quality MaterialThe Straight Bulkhead Flare including the Body, Lock Nut, Sleeve Nut are all made from light-weight 6061 aluminum.Bulkhead Flare Fitting feature anti-rust, waterproof, oil-proof. Straight Bulkhead Flare is sturdy, strong and reliable.. Wide ApplicationsStraight Bulkhead Flare is widely used in Diese, E85, Water, Air, Fuel lines etc. Bulkhead Fitting perfect to apply in automotive, industrial, boatmarine etc.. High PerformanceThe Bulkhead adapters provide an easy way to securely connect your lines together through firewalls, panels, etc. Straight aluminum bulkhead fitting has 37-degree AN sealing angle design assures leak free performance.. Easy To InstallDesigned for a smooth flow and easy installation of the male flare Bulkhead union and are available in 3 sizes 6AN, 8AN, 10AN. The anodized finish provides protection against corrosion and reduces normal wear and tear for Straight Bulkhead Flare all while giving the part a sleek look.. Quality ServiceWe provide a Two-month Return ServiceWhen You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You..

Wide ApplicationsFuel tank fittings are compatible with gasoline and alcohol based fuels,All aluminum construction featuring precise thread engagement and a 37sealing angle for a positive seal at maximum operating pressures.AN flare caps will block off fuel hose line prevent dirt and debris from entering the external threaded hose fittings and adapters. Connect fuel lines to fuel cells, radiused entries for unrestricted flow.. High Quality MaterialThe Bulkhead Fittings is made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength.. Easy To InstallWhen installing accessories, it is recommended to use AN adjustable wrench to screw the accessories into the mating part until the pre-formed package is fully inserted into the mating packaging seat. Tighten the accessories until they are snug.. High PerformanceThe fuel oil tank fitting maximum pressure is 4000psi 275bar and the working temperature range is -65 F to 252 F. Fuel fitting adapter includes two locking nut and four oil resistant washers.. Quality ServiceWe provide a Two-month Return ServiceWhen You Encounter Any Questions About The Product, You Can Contact Me As Soon As Possible, And I Will Answer It For You..

-6AN Male Flare To 516 Hose Barb Adapter Fitting Fuel Tank Fitting. Includes 1 bare aluminum fitting, 1 bare aluminum bulkhead nut, and 2 rubber washers.. Great for fuel tanks and fuel cells. Made from 6061 T6 Aluminum.

Add A Bulkhead Fitting To Your Existing Fuel Pump Module For A Double Pumper Fuel System. -6AN Flare To 516 Hose. Make Adding A Second Fuel Pump To Your Existing Tank A Breeze With A Bulkhead Fitting. Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum. Includes Fitting, Nut, and Sealing Washers.

Premium Quality The Male 6AN Bulkhead Fuel Cell Fitting Adapter are machined from lightweight 6061-T6 aluminum for strong strength and good durability. Black anodized for great appearance and anti-corrosion.. Size The thread size of 6an is 916-18 UNF. Features AN Male side features industry standard AN JIC flared 37-degree sealing surface. Package 1Pc Aluminum bulkhead adapter, including 2 sealing washers and 1 jam nut. Buyer Confidence- SYKRSS stand behind the quality of products. If for any reason you are not satisfied with your purchase, please contact us.We offer a 30-day money-back guarantee,and a 6-month replacement warranty giving customers a 100 Satisfaction.