Size PTFE fuel 6an hose ID 516 0.31 inch. OD 0.45 inch. Length 16ft. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI. The AN6 PTFE fuel line fitting kit is ideal for high pressure applications.. Applicable Medium The 6AN E85 fuel line is compatible with all automotive fuels, lubricants, and coolants.. Notice The -6 PTFE stainless steel braided fuel line is relatively hard and can't be bent or folded in half. Professional installation is highly recommended.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications..

Size PTFE 6an fuel line ID 516 0.31 inch. OD 0.45 inch. Length 20 ft6 m. Please measure before purchase Includes as shown in the picture. Parameter PTFE fuel line hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium EVIL fuel line kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Suitable for Widely Usage The PTFE nylon braided fuel line kit is mostly used in EFI LS systems. It can bu used as a fuel injection hose, LS engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carburetor fuel line, fuel return line, vapor return line, vacuum line, fuel supply line, turbocharger fuel line, and for other high-temperature and high-pressure applications.. Size The 6AN fuel line kit ID 516 0.31. OD 0.45. Please measure before purchase. Includes all components shown in the picture.. Working Pressure Working temperature range -76 to 446 -60 to 230. The maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI. The AN-6 nylon braided high-pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances.. Applicable Medium The PTFE fuel hose kit is compatible with all automotive fuels, lubricants, and coolants.. Notice The PTFE LS Swap EFI hose is relatively rigid and should not be bent or folded in half. Professional installation is highly recommended..

ID 516. OD 0.465inch.Length 20 feet6M. Please measure before purchase Includes as shown in the picture.. Working temperature range -76 to 446 -60 to 230. Max working pressure 3000psi. Bursting pressure 10000psi.. Applicable Medium all automotive fuels, lubricants, and coolants.. PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

BETTER KITS 26FT AN6 Fuel line 12pcs PTFE Hose End Fitting 4pcs Quick Disconnect Fitting 6pcs Hose Separator Clamp 2pcs 6AN Male Coupler 1pcs Standard Wrench 1pcs Way Reaming Tool.. SPECIFICATIONS Inner Diameter 38. Outside Diameter 0.465. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 3000psi. Bursting pressure 10000psi.. EFFECTIVELY PTFE fuel line can be compatible with all automotive fuelslubricantscoolant. Mostly used in EFI LS system and used as fuel injection hose, ls engine swap, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, vapor return line, etc.. MATERIAL The 6an fuel line kits made of more corrosion-resistant nylon Stainless Steel Braided PTFE Synthetic Rubber The fitting made of T6061 Aluminum. The material of union adapter is lightweight aluminum.. SERVICE 6AN PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended. If you have any questions, please contact with us, we are in 24 hours service.

Specifications ID 146mm OD 0.4712mm. Minimum Bend Radius 2.3660mm. Wall thickness 3mm.. Parameter Working Pressure 300psi. Burst Pressure 1200psi. Temperature Range -40F to 257F.. Medium The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

Fix Loose Fittings Dial in the Perfect Grip Our AN fitting tool doesn't care about brand variances. Two set screws let you perfectly center and clamp any standard socket nut. Simply tighten down for a dead-secure, leak-free fit with no play.. The 60-Second AN Fitting Install Ditch the wrenchs, bloody knuckles, and cuss words. Our AN hose assembly tool seats a fitting perfectly in under a minute. Save time and frustration on every fuel, oil, or transmission line job. Get back to what mattersdriving.. Complete Kit -4AN to -16AN Covered One AN fittings assembly tool handles the six most common AN sizes. All dedicated dies are included. No hidden costs, no hunting for extra adapters. Unbox it and get to work immediately on your car, truck, or boat.. Built for the Garage Tough 6061 Aluminum This AN fittings installation tool is CNC-machined from 6061-T6 aluminum alloy. We built it to take the torque and last a lifetime, so you can crank on it without worrying about flex or breakage.. Real Tool, Real Support Straight Talk Designed for CPE hose fitting installation only check your hose type. Got a problem or question Please find our team directly through Amazon..

Package include4X Straight Swivel Fuel Hose End.During the installation,the included accessory o-ring is not a must.Whether it can be used or not depends on your own need.Choosing not to use it won't influence the subsequent installation.. INDUSTRIAL QUALITYThe female AN6 fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength.. UNIQUE DESIGNSwivel design for easy assembly,Please select the corresponding wrench to use.4AN-4S wrench 6AN-6S wrench 8AN-8S wrench 10AN-10B wrench.. Wonderful for universal use6AN swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our 6AN fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose,rubber hose.. ServiceIf you have questions of our female AN6 swivel fittings,you can contact us.We value your shopping experience and strive to offer a high-quality product and service..

6 Size Fuel Line Hose Kit This kit includes the most common hose size, 18 38 516 14 12 316 5FT with appropriate sized clamps 30pcs. A variety of fuel hose at the ready for times when you need them, enough variety and length for nearly any project. High Performance The tubing hose is made of premium NBR braided Polyester Fibers material, 3mm wall to ensure thick and flexibledurability and resilience. Working Pressure 300PSI. Burst Pressure 1200PSI. Temperature range -40F to 257F-40C to 125C. Effort Saving And Time Saving These fuel lines are a must-have addition to your toolbox. From vehicles to ATVs to small engines and everything in between, It is nice for having around the shop barn for the multitude of equipment at the ready for times when you need them, Will making repair easier. WIDELY USEFUL The push lock reinforced rubber NBR fuel lines widely used in lawn mowerscultivatormotorcyleATV's tractors and other small engine equipment, automotive fuel systems, steam emission, oil cooling. Please check the application pressure before purchase. Reliable Customer Service Shineyoo always focuses on product quality and service. If You Have Any questions, Please Contact With Us, We Are In 24 Hours Service.

Fits For The braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. Working Parameter Maximum Working Pressure 3000psi. Bursting Pressure 10000psi. Temperature Range -76 to 446 -60 to 230. Package includes 10Pcs 6AN swivel hose ends 4Pcs straight, 2Pcs 45Degree, 2Pcs 90Degree, 2Pcs 180Degree, 2Pcs 6AN hose separator clamp and 6AN braided fuel line Length 20Feet. Hose ID 516. OD 0.465inch. Application The Nylon braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. Warranty LokoCar provide 6-months warranty for the fuel line kits. Please feel free to contact us via Amazon message.

Size The thread size of the 6AN fitting is 916-18 UNF. The AN side is sealed at a 37-degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN straight fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252 -53 to 122. Feature The 6AN straight fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Package 1 x 6AN 20FT Fuel Line Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Application 6AN braided fuel line hose kit, widely used for transmission oil cooler lines, fuel return lines, fuel supply lines, coolant hoses, fuel gauge lines, vacuum lines, turbo cooler lines, and oil feed lines. Feature 38 braided fuel line hose, constructed with silver nylon stainless steel braided outer cover and a chlorinated polyethylene CPE synthetic rubber inner liner. It is universally compatible with fluids such as fuel, lube, alcohol, ethanol, coolant, and air for automobiles or marine engines. Most suitable for racing cars motor racing bikes, but not applicable to E85. Material The 6AN hose is constructed from high-quality nylon and stainless steel braiding, has excellent flexibility and resistance to abrasion. Its 6AN fittings are constructed from durable aluminum alloy for long-term reliability. However, not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced. Outer nylon braided has excellent inflaming and safer to use. Work Scope Maximum Working Pressure 500psi, Bursting Pressure 2000psi. Working Temperature -40 to 350,Fuel Hose End SizeID 6 AN.

Size 38 Fuel line ID 0.38inch Hose OD 0.65inch Length 20 Feet. Hose Clamp 13-19mm.. Pressures Temp Range Maximum Working Pressure 650psi, burst pressure 1180psi Temperature range -4F to 212F-20C to 100C Min bending radius 66mm.. Suitable for Widely Usage The 38 push lock fuel hose is widely used with fuel filters, oil pumps, fuel tanks, fuel pressure regulators, oil coolers, etc.. Material Compatibility The 38 6AN fuel line features a CPE outer layer,an NBR rubber inner layer and polyester coated thread in the middle .This high pressure cpe fuel hose is compatible with petrol, diesel, oil, engine oil ,fuel and so on.. InstallationEasy to install, push to lock and use clamps to enhance sealing. Please measure before purchase.

Parameter This 6AN braided fuel line can withstand high pressure and has a long-lasting lifespan. Maximum working pressure 750 PSI. Bursting pressure 2,250 PSI. Temperature range -22 to 248.. Material The 6AN hose has a CPE rubber inner layer, a layer of 304 steel wire, and a nylon outer braid.. Compatibility The braided fuel hose is compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel, fuel, and more.. Suitable for Widely Usage The 6AN braided fuel line is used for many purposes, including transmission oil cooler lines, fuel return lines, fuel supply lines, coolant fluid hoses, fuel gauge lines, vacuum lines, turbo cooler lines, and oil feed lines.. Size and Installation Hose ID 0.31 inch Hose OD 0.56 inch Length 20 Feet. Installation instructions are included.It works with 6AN swivel hose end only..

Size 6AN male flare to 38 inch, the thread size of the 6 AN is 916 UNF. Fits to 38 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 38 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. NoteOnly applicable to stainless steel or aluminum hardline..

Maximum Working Pressure This 6an braided fuel line can stand high pressure, with long-lasting lifespan. Maximum working pressure 500psi bursting pressure 2000psi temperature Range -40 to 257.. Compatibility and Durability The braided fuel hose inner is made of CPE synthetic rubber which can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. Lightweight nylon fiber outer braid to strengthen its durability.. Suitable for Widely Usage The 6an braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Size and Installation Hose ID 0.34 inch Hose OD 0.54 inch Length 20 Feet. Installation instructions are included. Work with 6AN swivel hose end only.. Warranty Information The 3-month warranty is provided with this EVIL ENERGY. If you face any problem, please feel free to contact us..

SizeID 38 10mm, OD 23 17mm, Length 10FT. Working ConditionsNBR Fuel Hose Working Temperature Range -40F to 257F. Working Pressure 300PSI. Burst Pressure 1160PSI. Premium MaterialMade of premium NBR materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection. Applicable MediumNBR Fuel line can work with dieselbiodieselgasolineoilgreasewater and air, etc. Wide ApplicationNBR Fuel Line Hose widely used in the fuel system, steam emission, oil cooling, please check the pressure of application before purchase.

Material components 6AN Fuel Line is made of CPE synthetic rubberInner, Stainless Steel Wire MeshIntermediate and Nylon BraidedOuter.. Product Parameter Length 10 FT ID 0.348.8mm OD 0.5514mm.Temperature range -104 to 248 -40 to 120. Max working pressure 500PSI. Bursting pressure 2000PSI.. Widely Usage 6AN Fuel Line is widely used for transmission oil cooler line, vapor return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line, etc.. Attention The material of CPE is hard, it cannot be bent or folded excessively.Minimum bend radius 63.5mm.. Good Service If you have any problems, please feel free to contact us..

6AN PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications.. The fuel line stainless steel fittings kit includes 12pcs 6AN PTFE hose end fittings 4pcs straight, 2pcs 45 degree, 2pcs 90 degree, 2pcs 180 degree and AN6 PTFE braided fuel line Length 16feet. Braided Fuel Hose And add 2 x AN-4 hose separator clamp. Inner Diameter 516. Outside Diameter 0.43inch. Please measure before purchase. Working temperature range -76 to 446 -60 to 230. Maximum Working Pressure psi 3000 psi. Bursting Pressure psi 10000psi. AN-6 stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances.. PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Size AN6 916-18 UNF male flare to 38 inch 9.5mm push on hose barb, Pack of 2. Manufactured from lightweight 6061-T6 billet aluminum Anodized finish for strength, durability and anti-corrosion. 37 sealing angle guarantees a positive seal at maximum operating pressure. These AN to barb fittings are suitable for a wide range of automotive applications including Fuel, oil, diesel or water lines. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

1.14 Fuel Line Hose. Size ID 14 inch 6 mm, OD 0.47 inch 12 mm, Length 3 m10 FT. 2.This small engine fuel line is made of quality NBR, securely, light weight and portable. 3.Working temperature range -40 F to 257 F. Working pressure300 psi. Burst Pressure 1160 psi. Please check the working pressure and temperature of your system before purchase. 4.Wide application Fuel Hose widely used in fuel system, PCV system, steam emission, oil cooling. 5.The rubber fuel line hose can be compatible with oil, grease, diesel, gasoline, biodiesel fuel, water and air for use in cars, buses, trucks and more.

6AN FUEL LINE PARAMETERMAX working pressure 1885psi. Bursting pressure 7450psi. Temperature Range -40 to 275. ID 0.379.5mm OD 0.5213.3mm.. UPGRADED MATERIALMade in 3 structure, the inner is made of PTFE synthetic rubber, the intermediate is in 304 Stainless Steel Wire Mesh, and Nylon BraidedOuter.. UNIVERSAL FITTINGPTFE fuel line is compatible with transmission fluid, diesel, biodiesel, engine oil, E85 gasoline, methanol, water, diesel and fuel.. APPLICATIONIt is used to fuel injection hose, boost line, carb fuel line, engine swap fuel line, fuel return line, vapor return line,vacuum line and fuel supply line, etc.. NOTEThe material of PTFE is relatively hard, it cannot be bent or folded excessively.Minimum bend radius 3.5 inch. If you have any problems, please feel free to contact us..

Application 6AN braided fuel line kit widely used as fuel injection hose, LS engine exchange and EFI conversion fuel line.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with gasoline, diesel, and other fuels Except for E85 and ethanol. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Fuel Filter Regulator This fuel filter features an internal bypass that regulates fuel output pressure to 58psi. The LS Swap fuel pressure regulator has a built - in 10 micron fuel filter element to ensure that clean fuel is delivered to your engine, thus protecting the engine and increasing engine life.. Material 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp, 1pcs 6AN to 38 fitting, 1pcs 6AN to 516 fitting, 1pcs 6AN to 38 90 Degree Fitting, 1pcs fuel pressure regulator 58psi, 1pcs wrench and 6AN braided fuel line Length 25 Feet. Hose ID 0.31. Hose OD 0.56inch..

Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications, etc. NOT FIT E85.. Universal ApplicationThe fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Inner hose CPE synthetic rubber, Outer layer stainless steel braided.Hose Length 3.6m12ft, Color Silver. Hose End Size AN-6, Inner Diameter 0.34 8.7mm, Outer Diameter 0.55 13.9mm.. Working Temperature -100 to 500 -73C to 260C ,Working pressure 1000 PSI, Burst pressure 3000 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. AdvantageDesigned for smooth flow, the hose end fittings are made of high-quality aluminum alloy material for strong strength, Polished and anodized surface provide the bright appearance and corrosion protection.. NOTENot Legal in the state of California New York, Not complies with C.A.R.B. regulations, Not for sale in the states of CA and NY..

Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications, etc. NOT FIT E85.. Universal ApplicationThe fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Inner hose CPE synthetic rubber Outer layer stainless steel wire braided. Premium nylon fiber and stainless steel wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.. Length 10FT, Working Temperature -100 to 500 -73C to 260C ,Working pressure 1000 PSI, Burst pressure 3000 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. NOTE Not Legal in the state of California New York, Not complies with C.A.R.B. regulations, Not for sale in the states of CA and NY..

Compatible with Walbro Fuel Pumps Specifically engineered for Walbro 450, 525, and 550 fuel pumps, this 8mm submersible fuel line ensures a perfect fit and secure connection for reliable in-tank performance.. E-85 Compatible Built to handle modern fuels, including E-85. The durable construction prevents fuel degradation, cracking, and brittleness over time.. Corrugated Flexible Design The corrugated hose structure allows maximum flexibility and tight bends inside the fuel tank, making installation smooth while maintaining consistent fuel flow.. Premium Polyamide Material Crafted from high-grade polyamide, this fuel line resists corrosion, heat, and pressure. Easy Installation Each hose measures 516 8mm in diameter and 6 150mm in length, perfect for in-tank fuel pump connections. Designed for quick, secure installation in any fuel system..

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp and 6an braided fuel line Length 20 Feet. Hose ID 0.34. Hose OD 0.543inch.. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Package Includes 6an fuel line 20 FT 1 6AN Swivel Hose End Fittings 10 Hose Separator Clamp 4 6AN Male to Male Flare Coupler Union Fitting Adapter 2 6AN Male to AN4 Male Flare Reducer Coupler Union Fitting Adapter 2 Male Flare Plug with Hex head 1 6AN Male Flare to 14 NPT Fitting Adapter 4. Working Parameter 6an braided fuel line kit, Hose ID 0.33 inches Hose OD 0.57 inches Working temperature range -100 to 500 -73 to 260 Maximum working pressure 500 psi Burst pressure 2000 psi. High-Quality Materials The 6an fuel hose has an all black nylon fiber woven sheath and a CPE rubber lining The fuel hose has good flame retardancy and excellent corrosion resistance. Application The 6AN nylon braided oil hose kit is widely used as transmission oil cooler line, fuel return line, fuel supply line,etc. Can compatible with transmission fluid,engine oil, race gas,vacuum, hydraulic oil,diesel,and fuel Not suitable for E85. Support Professional installation is highly preferred Recommend to install with our AN Wrench If you have any questions and needs, please find our 24-hour Customer Service Team via Amazon.

Package includes3.3 Feet 1.0m 316 ID Fuel Line 1x, 3.3 Feet 1.0m 14 ID Fuel Line 1x 691035 493629 84001895 794079 56002 Toro Craftsman MTD Kawasaki FH430V filter, 12X Hose Clamps.. 316 rubber hose4.9mm inside diameter and 1132 inch8.9mm outside diameter. Hose Clamps are for the hose specically.. For transfer of petroleum products fuel lines vapor emission, for generators, small engines, mini bikes, go karts, water pump, air compressor, log splitter, lawn mowers snow blowers and many other machines.. 14 in fuel line 6.3mm and 11.5mm outside diameter. can also be used for for Briggs and Stratton MTD Craftsman Troy Bilt Cub Cadet Tecumseh Yard Man Yard machine Husky Huskee LCT Cmxx Powermore Honda Kawasaki small engines.. Fits for many 14 fuel line equiped lawn mowers, tillers, tractors, snow blowers, motorcycles, motor bicycles, mini bikes, dirt bikes, generators, trash water pumps, pit bikes, ATV, UTV, go karts, tao tao, 4 wheelers, snowmobiles, power pressure washers, marine boat outboardand motors, just about all small engines.. This multi - size combination product is designed to meet the needs of DIY mechanical repairs..

Premium Material Made of CPEinner layer, the 6AN fuel line is corrosion-resistant, offers stability across a wide temperature range -40125 and ensures a long service life. In addition, the stainless steel wiremiddle layer and the braided nylonouter layer creates a robust structure. The 6AN hose fitting is made of aluminium alloy, which is also corrosion-resistant and has great performance.. Parameter--Burst pressure2000psi Working pressure500psi. And please note the 6AN fuel line CAN NOT be bent excessively.. Easy to Use Compared to DIY installation, the assembled 6AN fuel line kit helps to enhance efficiency and save time. We offer various choices in length and swivel angle of the hose end fitting, meeting your needs in different scenarios.. Widely used The 6AN fuel line is suitable for automotive fuel system, engine cooling system...The 6AN fuel line is also compatible with petrol, diesel, coolant, hydraulic fluid, and other fluids, but it is not compatible with E85.. Tip Please choose appropriate hose end fittings and lengths, and had better use professional tools to ensure proper installation..

The 6an braided fuel line kit can be compatible with 4L60E 4L65E Transmisson cooler.. The Hose ID 0.31. Hose OD 0.56.Length 15 Feet.Minimum bending radius63.5mm.. The hose Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 4pcs 6an swivel hose ends 2pcs straight, 2pcs 90degree,2pcs 6an hose separator clamp, 2pcs 6AN to 14NPT fittings, 2pcs 6AN 916-18 UNF Male Flare to 14-18 NPSM and 6an braided fuel line Length 15 Feet.. The hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose adapters are made of high-performance aluminum alloy..

Include a universal 12Ft fuel hose and 6 x swivel hose ends 2 x AN-10 to AN-6 Fuel Tank Fitting Adapters. The included swivel hose ends are rotary for convenient operation Fitting Type Straight, 45 Degree, 90 Degree. CNC machined items, based on premium stainless steel T6061 alloy aluminum materials. With anodized surface, it is hard and solid Working Temperature -40 to 350 Working Pressure 1500 PSI. Not Legal in the state of California New York, Not complies with C.A.R.B. regulations.

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 6pcs 6an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 6an hose separator clamp,2pcs 6an to 6an Fitting and 6an braided fuel line Length 10 Feet. Hose ID 0.31. Hose OD 0.56inch.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Withstand Extreme Conditions Our 6AN braided fuel hose can handle a working pressure of up to 500 PSI and a burst pressure of 2000 PSI, with a temperature range of -104F to 248F. The 38 braided fuel line is an ideal choice for high-performance engines, ensuring safe fuel transfer even in racing or extreme environments. Premium 3-Layer Construction The 6an fuel hose has a three-layer design with CPE synthetic rubber inner lining, 304 stainless steel wire mesh middle layer, and a nylon braided outer cover. This provides 6an fuel line with excellent corrosion resistance, wear resistance and aging resistance. Wide Compatibility The 6an braided nylon fuel line is compatible with a wide range of fluids, including gasoline, diesel, coolant, hydraulic oil, fuel, and water. It is also suitable for various applications such as cars, motorcycles, racing vehicles, fuel systems, oil coolers, and power steering lines. Versatile ApplicationsThe 6an fuel line hose is ideal for fuel delivery and return systems, and it can also serve as a fuel gauge line, fuel return line, fuel supply line, coolant fluid hose, vacuum line, turbo cooler line, transmission oil cooler line, fuel injection hose, power steering return hose, fuel line hose,oil feed line,ls engine swap fuel line,vapor return line, etc. Cut to Fit Hassle-Free Compared to traditional rubber hoses, the 6an 38 braided fuel line offers superior durability and resistance to aging, providing a longer service life. With a length of 20FT for the 6an fuel hoses, it can be freely cut to fit different needs. The flexible nylon braiding allows tight bends min. 63.5mm radius.

For gas, diesel etc. fuel lines, vapor emission lines and vacuum smog control. Please note it's a non pressure fuel line, not for engines with fuel pumps.. Stretchy two-layer compound structure, heavy-duty, with the outer layer wrapping the inner layer more evenly compared to others. 10 ft in length. 14 in 6.4mm inner diameter and 716 inch outer diameter 10.4mm. The Hose Clamp is 10mm inner diameter, made of 1mm thinkness steel.. The Fuel Lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance Extra long can be be cut to size for all your usage.. Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in lawn mowers, tillers, tractors, snow blowers, motorcycles, motor bicycles, mini bikes, dirt bikes, generators, trash water pumps, pit bikes, ATV, UTV, go karts, tao tao, 4 wheelers, snowmobiles, power pressure washers, marine boat outboardand motors, just about all small engines. For Briggs and Stratton MTD Troy Bilt Craftsman Tecumseh Cub Cadet Yard Machine Yard Man lawn mowers and snow blowers etc. Package includes one 10 feet fuel line and 20pcs Hose Clamps..

High Quality Raw Materials - With high quality PTFE resin as raw material, the products are extruded and sintered with high temperature. The woven layer adopts SUS304 stainless steel wire.ID 516. OD 0.465inch.Length 20 feet. Please measure before purchase. Strong Applicability - The Fuel Line Specially Designed To Compatible With Petrol, Diesel, Oil, Hydraulic Fluid, Pump Gas, Alcohol, E85, Coolant, Fuel, And EtcWidely Used In Fuel System, Transmission System And Cooler System.. Free Cutting Size - The fuel line is 20 Feet 6.2 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines.. Corrosion Pressure Resistance - The Braided Fuel Line Can Stand -76 To 446 -60 To 230, Maximum Working Pressure Psi 3000 Psi. Bursting Pressure Psi 10000psi. The Fuel Line Has Good Retardancy And Excellent Corrosion Resistance.Best For The Brake System, Fuel Pump, Fuel Filter, Oil Return, Fuel Return System, Turbo Cooler System, And Transmission System, Oil Cooler Kit, Ect.. Professional Service -PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended. Recommended to Use Adjustable AN Wrench.If You Have Any Questions, Please Contact us in Time To Provide Quality Service..

Size ID 14 6mm, OD 0.47 inch 12mm, AN4 Fuel Hose, Length 10FT. Material This small engine fuel line is made of high-quality NBR, which is oil resistant. Working Pressure 0.6Mpa, Burst Pressure 1.8Mpa, Temperature Range -40F to 248F. Application Designed for conveying gasoline, diesel, biodiesel fuel, engine oil or water in car, truck, bus, automotive, etc. Please check the pressure of application before purchase. How To Use Use hose barbs and fuel line clamps to install.

Enough Quantity this package includes an enough quantity of 12 6AN black hose clamps, providing you with ample supply to meet your needs Whether you have multiple hoses to organize or require spares for future use, this quantity ensures you won't run out soon. Quality Material crafted from T-6 aviation aluminum alloy, these small hose clamps are built to last, with a polished surface, not easy to rust The use of this quality material ensures good durability and reliability, allowing the clamps to withstand the rigors of everyday use without compromising their performance Suitable for fuel pipes, oil pipes, brake pipes, gas pipes, water pipes, and more. Proper Size specifically designed for 6AN hoses, these automotive hose clamps offer a well fit and secure hold, matching the 38 outer diameter of the hose The precise sizing ensures that the clamps effectively grip the hoses without slippage or leakage, providing you with peace of mind and confidence in their functionality Please measure the outer diameter of the hose before purchasing. Organized and Neat say goodbye to tangled and messy hoses with this brake line clamp By securely holding and separating your hoses, it helps keep your lines organized and neat This not only improves the overall appearance of your setup but also makes maintenance and troubleshooting easier by providing clear visibility and accessibility to each hose. Wide Application with the versatile design, this 38 fuel line clamp is suitable for a wide range of applications Whether you're working on automotive projects, dealing with marine systems, or engaging in industrial tasks, this 6AN hose separator clamp is designed to meet your needs, making it a versatile choice for various projects Easily removed and installed using only tools from your garage.

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree,2pcs 6an hose separator clamp and 6an braided fuel line Length 25 Feet. Hose ID 0.31. Hose OD 0.56inch.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp,2pcs 6an to 6an Fitting and 6an braided fuel line Length 20 Feet. Hose ID 0.31. Hose OD 0.56.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Size ID 4AN 14 6mm Length 5FT Color Blue. Premium MaterialRubber nylon fiber wire materials, long service life, perfect racing accessories for fuel injection.. Working PressureImplementation Standards EN854 .Working pressure 2.8Mpa, 400psi. Burst Pressure4.3Mpa, 1200psi. Temperature Range -40F to 248F.. ApplicableFCNFLZF's fuel line can work with diesel biodiesel gasoline Oil grease water and air, etc.Please check the pressure of application before purchase.. UsageCut to actual length and use fuel line clamps for installation..

Size ID of 6an fuel hose0.348.63mm,OD0.5413.71mm.Length10ft.. Parameter Working pressure500psi,burst pressure2000psi Temperature range-40F to 257F -40C to 125CMin bending radius63.5mm.. Application 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.. Material Made of CPE synthetic rubber and nylon braided.. Warranty EVIL ENERGY provide 6an fuel line hose fitting kit 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message..

APPLICABLE MODEL2004-2007 Chevy Silverado 1500 6.0L2004 Chevy Silverado 25002004-2010 Chevy Silverado 2500HD2007 Chevy Silverado 2500HD Classic2004-2006 Chevy Silverado 35002007 Chevy Silverado 3500 Classic2007-2010 Chevy Silverado 3500HD2004-2007 GMC Sierra 1500 6.0L2004-2010 GMC Sierra 2500HD2007 GMC Sierra 2500HD Classic2004-2006 GMC Sierra 35002007 GMC Sierra 3500 Classic2007-2010 GMC Sierra 3500HDV8 Gas Engine 6.0L or 8.1L Only. Funtion 819-876 Fuel Line Kit Compatible with V8 Gas Engine 6.0L or 8.1L Only Crew CabShort or Long Bed Will NOT fit Cab Chassis Models Non-Flex Fuel Only. OE NUMBER The part number of reference is 819-876, 15946177, 15946180, 15946198., please confirm whether it is consistent with the OE you need.. EASY TO INSATLL Our kit is engineered for easy install, that does not require removal of the gas tank or original hard fuel line. This gives you the ability to not have to worry about dealing with the old rusty corroded fuel line.. Note Silverado HD 2500 3500 Fuel line Quick Fix Crew Cab 819-876 fuel repair kit is manufactured to substitute your original rusted out factory steel line from the fuel pump quick connect to engine lines..

Efficient Disassembly An indispensable helper for replacing fuel filters, this fuel line disconnect tool set can quickly disconnect the coupler, easily remove the connector, and precisely separate the connection with its precise clamping structure, significantly reducing time. It is a versatile tool essential for various replacement scenarios. Premium Material Crafted from premium carbon steel, this scissor-type fuel line removal tool offers high strength, hardness, and exceptional wear and impact resistance, being corrosion-resistant and resistant to breaking or deformation, ensuring stable long-term use and easily meeting various maintenance requirements. Wide Compatibility Specifically designed for 516-inch and 38-inch fuel lines and AC lines, this fuel line tool, featuring quick-release connectors, easily releases the corresponding line locking mechanisms, being compatible with most vehicles and widely applicable for repairs in cars, trucks, and SUVs. Humanized Design Featuring a scissor-style ergonomic design, this gm fuel line disconnect tool, with an easy-to-grip handle maximizing torque and reducing fatigue, boasts a 2-in-1 compact size easy to store, carry, and keep in the car for emergencies, ensuring easy and efficient maintenance. Easy to Use Designed thoughtfully for comfortable grip and easy operation, this fuel disconnect tool, after having the fuel line pressure released and being aligned with the filter interface, enables you to remove the filter easily upon hearing a faint click that signals the release of the locking mechanism.

ReplacementFlexible Stainless Steel Braided Fuel Line Replace for 819-876 15946177 15946180 15946198. Compatible withFlexible Stainless Steel Braided Fuel Line Fit for 2007-2010 ChevyChevrolet Silverado 3500 HD Crew Cab Pickup 4-Door 6.0L Fit For 2004-2006 ChevyChevrolet Silverado 3500 Crew Cab Pickup 4-Door 6.0L 8.1L Fit For 2007 ChevyChevrolet Silverado 3500 Classic Crew Cab Pickup 4-Door 6.0L 8.1L Fit For 2007 ChevyChevrolet Silverado 2500 HD Classic Crew Cab Pickup 4-Door 6.0L 8.1L Fit For 2004-2006 ChevyChevrolet Silverado2500 HD Crew Cab Pickup 4-Door 8.1L Fit For 2004-2010 ChevyChevrolet Silverado2500 HD Crew Cab Pickup 4-Door 6.0L Fit For 2004 ChevyChevrolet Silverado 2500 Fit For 2004-2007 ChevyChevrolet Silverado 1500 Fit For 2007 ChevyChevrolet Silverado 1500 HD Classic. Compatible withFlexible Stainless Steel Braided Fuel Line Fit For 2007-2010 GMC Sierra 3500 HD Crew Cab Pickup 4-Door 6.0L Fit For 2007 GMC Sierra 3500 Classic Crew Cab Pickup 4-Door 6.0L 8.1L Fit For 2007 GMC Sierra 2500 HD Classic Crew Cab Pickup 4-Door Fit For 2004-2006 GMC Sierra 3500 Crew Cab Pickup 4-Door 6.0L 8.1L Fit For 2007 GMC Sierra 2500 HD Classic Crew Cab Pickup 4-Door 6.0L Fit For 2004-2010 GMC Sierra 2500HD Crew Cab Pickup 4-Door 6.0L Fit For 2004-2006 GMC Sierra 2500 HD Crew Cab Pickup 4-Door 8.1L Fit For 2004 GMC Sierra 2500 Fit For 2004-2007 GMC Sierra 1500. Package included2 x Flexible Stainless Steel Braided Fuel Line 8 x SteelRubber clips 8 x nut and screws. Product functionThe product is made of high-strength and corrosion-resistant woven stainless steel, featuring long-lasting performance, reliable structure and a long service life.All brackets and connectors are flexible, saving replacement time and making installation simple. Note Please check the part number and compare with pictures provided here before purchasing to ensure proper fitment. Any questions please send us message.

Size Hose ID 0.31inch Hose OD 0.56inch Length 20 Feet. Please measure before purchase. Pressures Temp Range Maximum Working Pressure 750psi,burst pressure 2250psi Temperature range-22F to 248F-30C to 120C Min bending radius 63.5mm.. Application The braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Material 6AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc..

Complete Size Selection Includes three popular sizes 18 3mm ID, 5mm OD, 316 5mm ID, 8mm OD, and 14 6mm ID, 9mm OD, each 2 meters 6.6 feet long, meeting most small engine repair and replacement needs.. Durable Flexible TPU Material Crafted from premium thermoplastic polyurethane, this fuel line offers outstanding flexibility, long-lasting durability, and superior resistance to fuel, aging, and cracking far better than traditional PVC or PU hoses.. Wide Compatibility Perfect for gas and diesel applications on 2-stroke and 4-stroke engines, including lawn mowers, chainsaws, trimmers, blowers, tillers, and other outdoor power equipment. Truly a universal fit fuel hose kit.. Secure Connection with Clamps Included Comes with 12 high-quality steel spring-type clamps to ensure leak-free and vibration-proof connections, providing safe and stable operation in harsh environments.. Easy to Cut Install The flexible TPU tubing can be easily cut to your required length, then securely fastened with included clamps making fuel line replacement or repair fast, simple, and efficient even for DIYers..

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 4pcs 6an swivel hose ends 2pcs straight, 2pcs 90degree and 6an braided fuel line Length 20 Feet. Hose ID 0.53. Hose OD 0.79inch.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

CompatibilityFits for Chevrolet Silverado 1500 2500 3500 4.3l 4.8l 5.3l 6.0l 8.1l Pickup 2004-2010 for GMC Sierra1500 2500 3500 4.3l 4.8l 5.3l 6.0l 8.1l Pickup 2004-2010. OEM - FG0340, FLFG0340. Please refer to the vehicle compatibility and part number above to ensure proper part.. SpecificationFitment Type Direct Replacement Color Black Material Nylon Tubing Length 4.46 m Package Size 20.0020.0011.00 cm Package Weight 0.70 kg Package Includes Fuel Lines Repair Kit Showing as the picture Note Does Not Fit Trucks With 04-05 Flex Fuel Cab Chassis. Superior Material PerformanceHigh mechanical strength prevents rust, dry rot and cracking. Great toughness allows easy clipping and bending as needed. Nylon material features outstanding corrosion resistance against oil, dirt and road grime.. OEM Fit Easy InstallationMade with OE-grade craftsmanship for perfect matching and zero leakage. Easier to install and remove than steel lines, ideal for direct replacement.. 247 Customer SupportmaXpeedingrods provides lifetime technical support and a 1-year limited warranty for quality-related issues from the purchase date. Our customer service team is always ready to assist you..

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. This wrench size can be adjusted to 3AN, 4AN, 6AN, 8AN, 10AN, 12AN, 14AN and 16AN. It's made of lightweight 6061-T6 aluminum. Featuring a curved design with a non-slip handle for a comfortable grip and fit for hand movement.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree,2pcs 6an hose separator clamp,1pcs wrench and 6an braided fuel line Length 20 Feet. Hose ID 0.31. Hose OD 0.56.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line. Braided Steel Fuel Line Maximum Working Pressure psi 1000 psi. Bursting Pressurepsi 6000 psi. Working Temperature Range -40 to 257 -40 to 125 . Please make sure the pressure and temperature range is suitable for your application before purchase. Include a universal 3 FT fuel hose and 2 pcs swivel hose ends Inner Diameter 38 10.5 mm - Outer Diameter 58 17.5 mm. Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur. Professional installation is highly recommended. Please be careful of burrs at the inlet and outlet.

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 6pcs 6an hose separator clamp,2pcs 6an to 6an Fitting and 6an braided fuel line Length 20 Feet. Hose ID 0.34. Hose OD 0.54inch.. 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 750psi. Bursting pressure 2250psi. Temperature range -22F to 248F.. Package includes 2pcs hose finisher clamp and 6an braided fuel line Length 3 Feet. Hose ID 0.31. Hose OD 0.56.. 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Size The 6AN hose ID 0.31 inch hose OD 0.56 inch. Length 20 feet.. Parameter Maximum working pressure of this 6AN steel braided hose 750 PSI burst pressure 2,250 PSI. Temperature range -22F to 248F. Minimum bend radius 2.5 inches.. Material The 6AN stainless steel fuel line is made of a CPE rubber inner layer, and a braided 304 stainless steel outer layer. The hose fittings are made of tough aluminum alloy, and the gloves featuring a nitrile coating that offer maximum protection.. Package Includes The package includes 10PCS of 6AN swivel hose ends 4PCS straight, 2PCS 45-degree, 2PCS 90-degree and 2PCS 180-degree, 2PCS hose separator clamps, one 6AN stainless steel braided hose, one installation tool and a pair of gloves.. Compatibility The 6AN fuel line kit is compatible with transmission fluid, race gas, vacuum, hydraulic fluid, diesel, and fuel..

Part Number of Fuel Line Connection Tank side 6Y1-24305-06-00, 6Y1-24305-05-00, 6Y1-24305-04, 6mm Female. Engine side 6G1-24304-02-00, 6G1-24304-01, 6G1-24304-10-00, 6mm Male.. Application For Yamaha 24 Stroke Outboards. Male connector suit for Yamaha 6HP 8HP 9.9HP 15HP 25HP 30HP 40HP etc, 6mm fuel line. Female connector suit for Yamaha 85hp 75hp 70hp 6hp 60hp 8hp 55hp 50hp 48hp 40hp 9.9hp 30hp 25hp 15hp 90hp. Above is for reference, Please confirm part number, appearance and size before purchase.. Function of Fuel Line Connector Used for fuel feed, made with durable materials for weatherproof and sun light resistant. Provide better tightness by integrated seal.. Connection of Fuel Pipe Joint Comp The connect size is 6mm, not 38, and it fits the outboard models with 6mm14 fuel line. Come with 2pcs Pipe Joint, and one connect with Engine Side, one connect with Tank Side. Suit for 90445-11M06-00 hose and 90445-11M05-00 hose, and 6Y1-24360-52-00 primer pump assy.. Package Include 2x Outboard Female Fuel Line Connector for tank and engine side, 1x Male Fuel Line Connector for engine side..

Small Engine Fuel Line Package includes the following 4 different size tygon fuel line hose tubing,widely used in small engine lawn mower chainsaw string trimmer blower weedeater and other model parts. Fuel Line Hose Size I.D. x O.D .08 x .142mm x 3.5mm I.D. x O.D 332 x 3162.5mm x 5mm I.D. x O.D 18 x 3163mm x 5mmI.D. x O.D 18 x 143mm x 6mmFuel Hose Length 4 feet1.2 meter each. Weed Eater Fuel Line will degrade over time and these replacements are perfect for bringing your small engines back to life.High-quality petrol fuel line kit - oil, gas and corrosion resistant. These Weed Eater Fuel Lines Can be easily cut to length and bent easily to fit onto barbed connections,Widely used in all brands' small engine fuel system repairs. Hipa fast flow fuel line replacements are tailor-made to fit your small engine carburetor for the easiest possible connection to your fuel hose and pump. With high flexibility, Hipa's small engine fuel line reduces the risk of failure due to cracking and leakage and simplifies installation. Save yourself the hassle of returns and exchanges by double-checking your engine's model number and part number before ordering any parts.

Allstar Performance Coated Braided Line 12in 6 Hose -6 Str-6 90 Deg. Item Package Dimension 7.87401574L x 6.0236220411W x 0.7086614166H inches. Item Package Weight - 0.1873929227 Pounds. Item Package Quantity - 1. Product Type - HARDWARE TUBING.

Wide Application 6AN Fuel Line Kit This 6AN fuel line kit is widely used for transmission oil cooler lines, fuel supply and return lines, coolant hoses, fuel gauge lines, vacuum lines, turbo coolant lines, and oil feed systems. The 38 fuel hose with 6AN push lock fittings provides secure, leak-free connections for street builds, LS swap projects, small engines, and marine fuel systems. Complete 6AN Fuel Line Kit 29PCSThis all-in-one fuel line kit includes 1 25FT 38 fuel hose, 6 straight 6AN push lock fittings, 2 45 6AN fittings, 2 6AN to 38 NPT adapters, 3 6AN to 38 quick connect fittings, 1 6AN to 516 quick connect fitting, 10 stainless steel hose clamps, and 4 dual hole aluminum hose separatorseverything needed for a full installation. Professional Grade 6AN Hose FittingsThe 6AN hose features a durable 3-layer construction with NBR rubber inner and outer layers reinforced by braided polyester fiber for flexibility, oil resistance, and wear protection. All 6 AN fittings and hose separators are made from corrosion-resistant anodized aluminum, while stainless steel clamps ensure a firm, rust-proof seal under pressure. 38 Fuel Hose SpecificationsThis 38 fuel line has an inner diameter of 38 9.5mm, outer diameter of 23 17mm, wall thickness of 3mm, and a minimum bend radius of 3.9. Rated for 300 PSI working pressure and 1200 PSI burst pressure, this 6AN fuel line operates reliably in temperatures from -40F to 257F. Compatible with Multiple FluidsDesigned for versatility, this 6 an fuel line is compatible with gasoline, unleaded fuel, diesel, biodiesel, ethanol blends E10 E85, lubricating oil, hydraulic fluid, coolant, transmission fluid, and sour gasideal for fuel injection systems, oil cooler lines, and daily automotive applications.

150-piece Fuel Line Clamps with Organized Storage Case Includes spring band hose clamps in 6 sizes 7mm 8mm 9mm 10mm 11mm 12mm to fit a wide range of hose. The labeled, reusable plastic case allows quick size selection and saves time during repairs. Once the original hose clamps are used up, the labels can be easily DIY-printed, letting you refill and reorganize the case with new parts for continued use. Premium 65Mn Spring Steel Manufactured from high-quality 65Mn spring steel for superior strength and long-term durability. The 360 inner ring distributes clamping force evenly to protect the hose, while the smooth inner surface ensures a secure hold without cutting or damaging the hose. Secure Leak-Resistant The spring clamps delivers consistent, even pressure for a tight, reliable seal. Helps prevent leaks and hose loosening caused by temperature changes or pressure fluctuations. Quick Installation Installs easily with standard pliersopen, put it on the pipe, and release, providing a secure, consistent hold and saving time during repairs, even in tight engine spaces. Wide Applications Spring hose clamps are suitable for automotive fuel lines, vacuum hoses, air hoses, water pipes, gas lines, and silicone hoses. Ideal for marine, motorcycle, lawnmowers, and small engine connections. Friendly Reminder We recommend measuring the actual outer diameter of the pipetube first, then selecting the corresponding spring band hose clamps size.

Application 6AN An all-Silver nylon fiber braided outer cover and a Chlorinated Polyethylene CPE synthetic rubber inner line. Universal Such as fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars motor racing bikes,but not applicable to E85.. Material Nylon Fiber And Stainless Steel Braid 6AN Cover For Excellent Flexibility And Resistance To Abrasion. Not Recommended Installation In Corrosive Environment, 6AN Braided Fuel Line'S Service Life Will Be Influenced. Outer Nylon Braided Has Excellent Inflaming And Safer To Use.. Work Scope Maximum Working Pressure psi 1000 psi, Bursting Pressure psi 6000psi. Working Temperature -40 to 350,Fuel Hose End SizeID 6 AN , Material T7 Aluminum Alloy, Color Blue Red.. Package Includes 20FT 6m 1 x Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends.. 6AN Braided Fuel Line Kit Is Widely Used For Transmission Oil Cooler Lines, Fuel Return Lines, Fuel Supply Lines, Coolant Hoses, Fuel Gauge Lines, Vacuum Lines, Turbo Cooler Lines, And Oil Feed Lines.Not Legal in the state of California and NewYork, Not complies with C.A.R.B. regulations..

MaterialOutside Hose Material Coverd with High Quality Nylon and Stainless Steel Wires Inner Hose Material CPE Synthetic Material Hose.. CPE Braided HoseMostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel.. ApplicationThis braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect.. PerformanceNylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use.. NoteNot recommended installation in corrosive environment, braided fuel line's service life will be influenced..

10ft Long - 14 inch 6.35mm ID x 38 OD 9.5mm Fuel Line Petrol Gas Hose Tube. Fits most Brands with Small Engines. For motorcycles, lawn mowers, tillers, tractors, snow blowers, motor bicycles, dirt bikes, mini bikes, generators, trash water pumps, pit bikes, ATV, UTV, go karts, tao tao, 4 wheelers, snowmobiles, marine boat outboardand motors, power equipment and small engines ect. 10 Feet 14 Inch 6mm ID Fuel Line Hose for Kawasaki Kohler Briggs Stratton Small Powersports Engines and Generators. Replacemenet Petrol Fuel Gas Line Pipe Hose Tubing For Powersports Generators and other Power Tools with Small Engines. Premium Material petrol fuel line - Oil and gas resistant, corrosion resistant, No compatible with greater than 10 ethanol fuel.

Package Included 1 12Ft 6AN Braided Fuel Hose 6pcs Swivel Hose Ends. Apply Models The fuel line hose fits different brands of different cars. Just choose the right size. Application for Racing Fuel, Pump Gas, Fuels with Ethanol, Alcohol Based Fuels, Motor Oil Coolant etc. Parameter 12 Stainless Steel Braided 6AN Fuel Line Inner Hose, Material CPE Synthetic Material Tubing, Hose SizeID AN 6, Length 3.6m12ft, Color Silver, Hose End SizeID AN 6, Color Red Blue Inner Diameter AN-6 38 Outer Diameter AN-9 916. Safety Features With anodized surface, it is hard and solid Working Temperature -40 to 350 Working Pressure 1000 PSI Burst Pressure 6000 PSI. Note This part is not legal for sale in the states of CA and NY. Professional Installer is Highly Recommended No Instruction Included.

High QualityThis Fuel line assembly is made of premium quality rubber, Compatible with ethanol blended fuels, engineered low permeation material prevents fuel evaporation.. SizeUniversal 6 FT Outboard fuel line, Hose inner diameter 38 10mm, outer diameter 58 16mm.. Wide ApplicationThis fuel line siphon pump can transfer gas, diesel, Liquids. Suitable for Boats, RVs, Tractors, Caravans, Motorcycle, Jeski, Lawn Tractor, Lawn Mower, Snow Blower.. Easy to UsePut the fuel transfer hoses in where you want them and pump the hand pump and it draws out all the fluid. This gasoline siphon pump made it effortless to empty out my gas tanks.. AdvantageOutboard motor fuel line with bulb check valves allow priming in multiple orientations without restricting fuel flow.. NoteThis boat gas line with primer bulb is made of rubber product, please do not store this item under direct sunlight or other rough environment..

MaterialOutside Hose Material Coverd with High Quality Nylon and Stainless Steel Wires Inner Hose Material CPE Synthetic Material Hose.. CPE Braided HoseMostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel.. ApplicationThis braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect.. PerformanceNylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use.. NoteNot recommended installation in corrosive environment, braided fuel line's service life will be influenced..

Compatible with ethanol blended fuels, Engineered low permeation material prevents fuel evaporation.. INCLUDE - The marine boat fuel line assembly includes a premium quality rubber bulba free primer bulb for youand 6ft 38in fuel hose,360 stainless steel hose clamps.. FITMENT - This is universal fuel line and as such do not come with engine or tank fittings,Suitable for Boats, RVs, Tractors, and Caravans.. FUNCTION - Keep your fuel line operating at peak performance with our BARTOO fuel line assembly,and ensure your outboard motor runs smoothly.. NOTICE - This is rubber product, please do not store this item under direct sunlight or other rough environment..

18 I.D x 14 O.D Fuel Line Hose Length 10 Feet3 Meters, Fuel Line I.D x O.D 18 x 14 3mm x 6mm, High-Performance PVC Fuel Hose. 18 x 14 High quality Fuel Line Gas Line Hose Tube3mm x 6mm Fuel Line Suitable for Small Engines, Trimmers, Lawn Mowers, Chainsaws, Blowers, Generators, Pressure Washers, Weed Whackers and Many Other Gas Engine Machines. 18 Inch Fuel Line Hose Incompatible with Gasoline Containing more than 10 Ethanol When Not In Use, Store In A Cool, Dry Place. The 18 I.D 14 O.D Fuel Line Features Flexibility and Resistance to Bending with Excellent Resilience It is Wear-resistant, Oil-resistant, and Corrosion-resistant Made from Premium Materials, It Resists Aging and Offers Long-lasting Durability And Withstanding Temperatures from -22F to 167F. We offer fuel hoses in various specifications suitable for multiple applications. Please verify the inner and outer diameter dimensions before purchasing and select the size that best fits your machinery.

Specifications ID 146mm OD 0.4712mm. Minimum Bend Radius 2.460mm. Wall thickness 3mm.. Parameter Working Pressure 300psi. Burst Pressure 1200psi. Temperature Range -40F to 257F.. Medium The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

Size PTFE fuel 6an hose ID 516 0.31 inch. OD 0.43 inch. Length 10ft. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium PTFE 6an fuel line kit is compatible with all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Notice PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size PTFE 6an fuel line ID 516 0.31 inch. OD 0.45 inch. Length 26 ft7.9 m. Please measure before purchase Includes as shown in the picture. Parameter PTFE fuel line hose working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting pressure 4,500 PSI.. Applicable Medium Our PTFE fuel hose kits are suit for all automotive fuels, lubricants, and coolants.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE LS fuel hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

DURABLE INTRODUCTION The pipeline is made of two layers of NBR rubber, with polyester fiber wrapped in the middle.. MATERIAL The fuel hose is made of NBR and polyester fiber, oil and wear resistant.. FUEL HOSE SIZE ID 14 6mm, OD 0.47 12mm, Length 5FT.. WIDE APPLICATION Fuel Line can be widely used in oil pipelines for automotive internal combustion engines, mechanical equipment, etc. Tip please check the pressure of application before purchase.. CUSTOMER SERVICE Purchase the Fuel Line Hose with confidence. If you have any question, please contact us by email. We will give you a satisfactory reply..

Fits For The braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. Working Parameter Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257. Package includes 6Pcs 6AN swivel hose ends 2Pcs straight, 2Pcs 45degree, 2Pcs 90degree, 2Pcs 6AN hose separator clamp and 6AN braided fuel line Length 10Feet. Hose ID 0.34inch. Hose OD 0.54inch. Application The Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. Warranty LokoCar provide 6-months warranty for the fuel line kits. Please feel free to contact us via Amazon message.

Superior TPU Material Made from flexible, fuel-resistant TPU that outperforms traditional PVC. Resists hardening, cracking, and aging, ensuring long-lasting performance in small engines.. Complete 3-Size Kit Includes 6.6FT each of 18 3mm ID, 5mm OD, 316 5mm ID, 8mm OD, and 14 6mm ID, 9mm OD fuel line. Covers most common sizes for lawn mowers, chainsaws, trimmers, blowers, and generators.. Wide Compatibility Works with 2-cycle and 4-cycle engines from popular brands like Echo, Craftsman, Poulan, Stihl, Honda, and more. Perfect for repairs or replacements.. Secure Connections Comes with 12 rust-resistant stainless steel spring clamps. Ensure leak-proof, vibration-proof seals on barbed fittings for safe and reliable operation.. Easy DIY Installation Cut to desired length with scissors, bend easily to fit, and clamp securely. No special tools neededideal for homeowners, gardeners, and repair pros..

ApplicationThe Hawley 4150 Dual Intake Fuel Line Kit is compatible with any 4150 base carburetor and is an excellent choice for replacing auto parts, suitable for Holley, Quick Fuel, Aed, etc.. FeatureThe Hawley 4150 Fuel Line ensures the right fuel delivery to the carburetor at a consistent rate, ensuring a smooth fuel flow to the carburetor.. MaterialThe Holley Dual Feed Fuel Line is constructed from high-density lightweight aluminum for long-lasting durability, and the hose is made of stainless steel nylon fiber braiding, providing wear resistance and heat resistance.. ProcessThis product undergoes professional manufacturing with exquisite craftsmanship, featuring a unique design and delivering consistent performance and high reliability. It has been rigorously tested to ensure top quality and premium performance with an extended service life.. After-SalesIf you encounter any concerns regarding quality, shipping, or other issues, please don't hesitate to contact us first. We maintain the highest standards of excellence and are committed to achieving 100 customer satisfaction.

6AN Fuel Line hose Kit, AN6 38 Braided Nylon Fuel Hose CPE 20FT Black Hose ID 1132. Hose OD 0.543inch. Length 20feet.. 6AN nylon and stainless steel braided fuel hose kit can usually be used with coolant, diesel, engine oil, hydraulic oil, pump air, air and fuel. Please note that the service life may be shortened when using fuel. Not suitable for E85. This kind of braided 6an hose can be used for brake system, fuel pump, fuel filter, oil return, oil return system, turbo cooler system, transmission system, oil cooler kit, etc.. The operating temperature range of 6AN CPE hose is -100 to 500 -73C to 260C . Maximum working pressure psi 500 psi. Burst pressure psi 2000psi. The CPE fuel line hose can stand high-temper, and pressure, with long-lasting lifespan,Please check the working pressure and temperature of your system before purchase.. 100 QUALITY MATERIALNylon and Stainless Steel Braided CPE Synthetic Rubber The fitting made of T6061 Aluminum,high strength and good durability. The material of union adapter is lightweight aluminum. Tips Professional installation is strongly recommended, it is not recommended to install in corrosive environment, it will affect the service life of 6AN braided fuel pipe.. 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message. The 6AN fuel line hose kit includes 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends and 58 CPE braided fuel line Length20ft6M .

WIDE APPLICATION - NOLY ONT FIT E85The MUGE RACING nylon braided fuel line hose can be used as transmission oil cooler line,fuel return line,fuel supply line,coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line and can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel.. WORK CONDITION - Maximized resistance to heat, corrosion and abrasion.The operating temperature range of CPE hose is -40F to 257F -40C to 125C. Maximum working pressure psi 500 psi. Burst pressure psi 2000psi.The CPE fuel line hose can stand high-temper, and pressure, with long-lasting lifespan,Please check the working pressure and temperature of your system before purchase.. FLEXIBLE DURABLE - The black braided nylon fuel line is braided with outer nylon braided, center stainless steel, Inner synthetic rubber. The construction enhances flexibility and give a cool racing appearance,The fittings and hose separator for the fuel line is made of T6061 Aluminum, anodized finish for high strength and good durability.. A GIFT for CUT HOSE -There is a free duct tape for you,make you easily cut hose without destroying the steel braided,Before you cut the hose,you just need to wrap duct tape tightly at the cut off area and cut through the center of the wrapped up tape rotating the hose during the cut. TIPS - Professional installation is highly recommended.Please do not install it in a corrosive environment,which will affect the service life of braided fuel Line Hose..