sizethe thread size of 6AN is 916-18 UNF,the thread size of 6AN ORB is 916-18 UNF. SealingThe AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring.. Material The 6AN to 6AN orb reducer is made of aluminum alloy 6061-T6 which is anodized black surface,and the O-ring is made of NBR rubber.Temperature Range -40F to 212F.Maximum working pressure 4000PSI. The orb fitting can be used with water, air, fuel, oil, fuild, E85, etc.. EVIL ENERGY provide the orb adapter 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Size Thread Size of 6AN PTFE Fitting is 916-18UNF.. Application The PTFE Hose End only work with PTFE fuel line.. Parameter Working pressure 1500PSI. Temperature range -65F-252F.. Seal The AN side is sealed by a 37 degree angle.. Material and Feature Made of aluminum alloy 6061-T6. 360 Swivel design for easy assembly..

Size The thread size of 6an is 916-18 UNF.. Seal The AN flare is sealed at a 37 degree angle.. Parameter Max Working Pressure 1500 PSI. Working Temperature Range -65 F to 252 F.. Material Made of aluminum alloy 6061-T6, anodized black surface.. Function The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters..

Size The thread size of the 6AN fitting is 916-18 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252-53 to 122. Feature The 6AN 90-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size AN6 916-18 UNF male flare to 14-18 NPSM, pack of 2. Podavelle transmission cooler fittings are designed to replace OEM adapters in TH350, TH400, 700R4, 4L60E, 200-4R, TR6060, AOD, 4R100, 4R70W, C5 and additional applications that utilize 14 NPSM threads. These fittings feature straight threads instead of tapered. This will allow you to connect your braided line to your transmission case without cracking your transmission case. Manufactured from lightweight 6061-T6 aluminum, comes with sealing washers Anodized finish for strength, durability and anti-corrosion. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size 6an female to 38 barb, and that of 6an thread size is 916-18UNF.. Material made of aluminum alloy, reusable and recyclable.. Max pressure 2000PSI, temperature range -40 to 248.. Please attention that an6 push lock hose barb only compatible with rubber fuel line.. EVIL ENERGY provide 3 angles of 6an hose barb straight,45degree,90degree..

Fuel Pressure Take-off Fitting The fuel pressure take-off fitting is an AN6 male to -6 female with a 18 NPT gaugegage port. The thread size of the 6AN is 916-18 UNF.. Sealing The AN thread of the flare is sealed at a 37-degree angle, and the NPT thread is sealed with a 60-degree taper. It is highly recommended to use sealant or PTFE polytetrafluoroethylene tape on the NPT port.. Material The fitting is made of 6061-T6 aluminium alloy.. Parameter The maximum working pressure is 1,500 PSI. The working temperature range is -40F to 250F.. Application The fitting is widely used in fuel systems to add a fuel pressure gauge or sensor between fuel lines..

Size Thread Size of 6AN PTFE Fitting is 916-18UNF.. Application The PTFE Hose End only work with PTFE fuel line.. Parameter Working pressure 1500PSI. Temperature range -65F-252F.. Seal The AN side is sealed by a 37 degree angle.. Material and Feature Made of aluminum alloy 6061-T6. 360 Swivel design for easy assembly..

Product Size Parameter Size 6AN. Thread Size 916-18 UNF. Working Pressure 1500PSI. Working Temperature Range -40F-248F. Angle 90 Degrees. Note Please verify the hose size before purchase.. Application The fittings help connect and route fuel hoses in tight spaces. Only for use with PTFE fuel lines for E85, alcohol, nitro, clutch, nitrous, power steering, oiling, hydraulics, and vacuum applications.. Easy Installation Require an AN adjustable wrench for installation. A 360 swivel design provides enough flexibility for easy assembly.. Anti-Leak Seal At the AN side, there is a 37-degree flare angle to form a complete seal without applying an extra sealing compound.. Built to Last The one-piece PTFE hose end fitting is made from lightweight 6061-T6 aluminum alloy, and a black anodized finish on the surface increases durability, anti-corrosion, and wear resistance..

Size 6AN to 38 inch barb Thread size of 6AN 916-18UNF, Widely used in fuel systems, oil coolers, steam emission setups, and for transitions in fuel, oil, or coolant lines. It is compatible with rubber hoses, including SAE 30R7 NBR. Package include 6AN Push Lock Kit. Contains 6 aluminum straight fittings and 4 x 90-degree elbow fittings black with 10 stainless steel clamps. Material 6061-T6 aluminum construction withstands 1500 PSI and -65F to 252F temperatures suited for most automotiveindustrial environments. Barbed ends designed specifically for standard rubber fuel hose compatibility not for hardline or PTFE. Durable Corrosion Resistant Constructed from Aluminum materials with a sleek black finish. Resists corrosion and withstands demanding automotive or industrial environments. Installation Features convenient push-lock design for quick and tool-free assembly. Simply push the hose onto the barbed end for a reliable, vibration-resistant seal. Notice The clamp can be used for connecting CPE hose, while rubber hose do not require the use of a clamp.

Size The inner hole diameter is 0.51 inch 12.9 mm, which is suitable for clamping and mounting 6AN fuel lines.. Material The clamp is made of 6061-T6 aluminum alloy.. Function It is used to secure and separate transmission lines, helping to keep your project clean and organized.. Application The fuel hose separator clamp is widely used for fuel hoses, oil lines, brake lines, gas lines, water pipes, and more.. Note Five sizes of hose mounting clamps are available. Please measure the OD of your hose before purchasing..

BETTER KITS 26FT AN6 Fuel line 12pcs PTFE Hose End Fitting 4pcs Quick Disconnect Fitting 6pcs Hose Separator Clamp 2pcs 6AN Male Coupler 1pcs Standard Wrench 1pcs Way Reaming Tool.. SPECIFICATIONS Inner Diameter 38. Outside Diameter 0.465. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 3000psi. Bursting pressure 10000psi.. EFFECTIVELY PTFE fuel line can be compatible with all automotive fuelslubricantscoolant. Mostly used in EFI LS system and used as fuel injection hose, ls engine swap, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, vapor return line, etc.. MATERIAL The 6an fuel line kits made of more corrosion-resistant nylon Stainless Steel Braided PTFE Synthetic Rubber The fitting made of T6061 Aluminum. The material of union adapter is lightweight aluminum.. SERVICE 6AN PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended. If you have any questions, please contact with us, we are in 24 hours service.

Banjo thread AN6 916-18 UNF male flare. Bolt thread -6 ORB 916-18 UNF. Banjo thickness 19.5mm. Constructed from 6061-T6 billet aluminum for the banjo and 304 stainless steel for the bolt Anodized finish for strength, durability and anti-corrosion. This assembly is the perfect low-profile solution where standard 90-degree AN fittings are too bulky. It seamlessly connects a -6 ORB port to a -6 AN line at a 90-degree angle, routing fuel or oil efficiently in tight spaces. The banjo can be rotated a full 360 degrees even after installation. This allows for perfect alignment of your AN hose, eliminating stress on the line and ensuring optimal flow for maximum performance. Perfect for use with fuel rails, fuel pressure regulators, surge tanks, turbochargers, power steering systems, etc Safe for use with all types of fuels, including alcoholic fuels.

Size The fitting is an AN6 to 38 NPT adapter, and the thread size of the 6AN is 916-18 UNF. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Sealing The AN side of the flare is sealed at a 37-degree angle, and the NPT thread side is sealed with 60-degree tapered threads.. Application The fitting is widely used in fuel systems, cooling systems, power steering systems, and more.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended..

Size The thread size of the AN6 hose end is 916-18 UNF. It is only compatible with 6AN stainless steel and nylon braided hoses. The ID of the 6AN line clamp is 0.51 inch 12.9 mm. Material The fitting is made of 6061-T6 aluminum alloy with a black anodized surface. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252. Function The 6AN swivel hose end kit includes multiple angled fittings and 6AN unions to meet various installation requirements. The 6AN separator clamp is used to secure and organize lines, keeping your project clean and organized. Application It is widely used in transmission lines, fuel filters, fuel injection systems, cooling systems, and more.

Size This fitting is 6AN to 38 barb. The thread size of the 6AN end is 916-18 UNF. Application The barb fitting works only with rubber fuel lines. Parameter Maximum working pressure 1,500 PSI. Temperature range -40 to 248. Material The 90-degree fitting is made of 6061-T6 aluminum alloy. Installation This 6AN 90-degree fitting is easy to install. It is recommended to use clamps to enhance sealing.

HIGH PERFORMANCE AND RELIABILITY - The 6AN and AN6 ORB fittings are constructed from 6061-T6 aluminum alloy valve bodies and nitrile rubber O-ring materials. These components exhibit excellent corrosion resistance, high-pressure tolerance, and a working pressure capacity of up to 1500 PSI. The flare's operational temperature range is -65F to 252F, while the O-ring's temperature range extends from -4F to 392F. LEAK-PROOF DESIGN WITH GOOD SEALING - A dual-sealing mechanism is employed The ORB end features pre-installed fluororubber Viton O-rings, which provide superior resistance to fuel, high temperatures, and chemical corrosion, effectively eliminating leakage risks. The AN side of the flare is sealed by a 37 degree angle interface ensures a robust metal-to-metal seal, making it ideal for high-pressure applications. BROAD COMPATIBILITY ACROSS SYSTEMS AND APPLICATIONS- Cross-system connectivity This product addresses conversion needs between AN Flare interfaces commonly used in fuel lines and braking systems and ORB connectors widely utilized in industrial pumps and agricultural machinery. It's suitable for Oil cooler fuel tank fuel pump fuel hose line,which can work with alcohol and other peculiar fuel additives, peculiar fuel additives, water and oil, etc,E85 Compatible. SIMPLIFIED INSTALLATION PROCESS - Precision manufacturing technology CNC-machined threads ensure precise alignment during assembly, preventing issues like cross-threading or jamming. No additional thread tape or sealant is required, thereby simplifying the installation process and reducing operational complexity. LIGHTWEIGHT AND COMPACT CONSTRUCTION - The lightweight and space-efficient design makes these fittings ideal for confined areas, layouts where space optimization is critical. PRODUCT CONTENTS- 6pcs 6an to 6 orb fittings are included, with the 6AN fitting featuring a thread size of 916-18 UNF.

Package include4X Straight Swivel Fuel Hose End.. INDUSTRIAL QUALITYThe female AN6 fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength.. UNIQUE DESIGNSwivel design for easy assembly,The adjustable AN wrench is highly recommended.. Wonderful for universal use6AN swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our 6AN fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose,rubber hose.. ServiceIf you have questions of our female AN6 swivel fittings,you can contact us.We value your shopping experience and strive to offer a high-quality product and service..

Size The thread size of the 6AN fitting is 916-18 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252-53 to 122. Feature The 6AN 90-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

100 QUALITY MATERIALThe fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum.Working Temperature Range -65 to 252 -53 to 122.Max Working Pressure 1000psi. EASY INSTALLATIONSwivel fittings are easy to use and don't require special equipment. These new full flow swivel hose ends swivel to allow for a quick alignment of the hose after assembly. WIDELY APPLICATIONS6AN swivel hose end 6an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on. Package Including2pcs 6AN Straight hose fitting 2pcs 6AN 45 Degree hose fitting 2pcs 6AN 90 Degree hose fitting 2pcs 6AN 180 Degree hose fitting 6pcs 6AN Hose Separator Clamp 2pcs 6AN male coupler. 100 SATISFACTIONIf you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem.

Size 6AN female to 38 inch, the thread size of the 6 AN is 916 UNF. Fits to 38 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 38 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. Note Only applicable to stainless steel or aluminum hardline..

AN6 916-18 UNF male to Parallel 2 x AN6 916-18 UNF male Y block fuel splitter. Manufactured from lightweight 6061-T6 billet aluminum. Anodized finish for strength, durability and anti-corrosion. Suitable for oil fuel coolant water air gas, etc Great for any liquid or gas application where a high-flow splitter is needed. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size The thread size of the 6AN fitting is 916-18 UNF. The AN side is sealed at a 37-degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252 -53 to 122. Feature The 6AN 90-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Thread size -6 AN male flare to -6 ORB O-ring, 90 degree high-flow forged bend. Manufactured from lightweight 6061-T6 aluminum Anodized finish for strength, durability and anti-corrosion. The low-profile design is perfect for applications with limited engine clearance. 360 full swivel head allows for easy installation and angle adjustment. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size The thread size of the 6AN fitting is 916-18 UNF. The threaded end is sealed at a 37-degree angle. Feature The profile of the hose end is more compact and is suitable for tight spaces. Application The hose fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 90-degree fitting is made of 6061-T6 aluminum alloy. The bending part is produced through a forging process. Parameter Maximum working pressure 1,500 PSI. Working temperature range -40 to 250 -40 to 121.

Size The thread size of the 6AN fitting is 916-18 UNF. The AN side is sealed at a 37-degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN straight fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252 -53 to 122. Feature The 6AN straight fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size The thread size of the 6AN male coupler is 916-18 UNF.. Seal The AN thread of the flare is sealed by a 37-degree angle.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The coupler is made of aluminum alloy 6061-T6.. Application The male-to-male flares coupler is usually used in fuel systems, such as extending fuel hoses, connecting lines to fuel pumps, and cooler systems..

Size Thread size of 6AN is 916-18 UNF.. Parameters Working Pressure 1500PSI. Temperature range -40F to 250F-40C to 121C. Sealing The AN thread of the flare is sealed by a 37 degree angle. Material Made of 6061-T6 aluminum and reinforced with black anodized aluminum for greater corrosion resistance. Application Widely used in automotive fuel systems, such as carburetors and injectors, as well as fluid systems.

Thread size -6 AN male flare to -6 ORB O-ring, pack of 2. Manufactured from lightweight 6061-T6 aluminum. Anodized finish for strength, durability and anti-corrosion. Suitable for oil fuel coolant water air gas, etc. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size The fitting is an AN6 to 14 NPT adapter, and the thread size of the 6AN is 916-18 UNF.. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Sealing The AN side of the flare is sealed at a 37-degree angle, and the NPT thread side is sealed with 60-degree tapered threads.. Application The fitting is widely used in fuel systems, cooling systems, power steering systems, and more.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended..

Size The thread size of the 6AN fitting is 916-18 UNF. The AN side is sealed at a 37-degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 6AN 180-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252 -53 to 122. Feature The 6AN 180-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size The fitting is an AN6 to 14 NPT adapter, and the thread size of the 6AN is 916-18 UNF.. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Sealing The AN side of the flare is sealed at a 37-degree angle, and the NPT thread side is sealed with 60-degree tapered threads.. Application The fitting is widely used in fuel systems, cooling systems, power steering systems, and more.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. The fitting allows easy installation and removal with a wrench..

Size 6AN male flare to 38 inch, the thread size of the 6 AN is 916 UNF. Fits to 38 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 38 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. NoteOnly applicable to stainless steel or aluminum hardline..

Size The thread size of the 10AN fitting is 78-14 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 10AN 45-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252-53 to 122. Feature The 10AN 45-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size The thread size of the 6AN fitting is 916-18 UNF. It is suitable for 6AN hoses. Parameter Maximum working pressure 1,500 PSI. Working temperature range -40 to 250 -40 to 121. Material The 6AN fitting is made of high-strength 6061-T6 aluminum alloy. The hose end is black anodized to provide added corrosion and wear resistance. Sealing The AN side of the hose end is sealed at a 37-degree angle. Compatibility The male hose end straight fittings work only with stainless steel braided and nylon braided CPE hoses. They are not compatible with other types of hoses.

AN6 916x18 UNF aluminum tube nut and sleeve assembly, suitable for 38 outside diameter hardline tubing. Package includes two nuts and two sleeves. Manufactured from lightweight 6061-T6 billet aluminum Anodized finish for strength, durability and anti-corrosion. These AN hardline tube nut and sleeve provide a AN JIC connection to the end of aluminum tubing. Notice your hardline tube end will need to be flared at 37 degrees using a flaring tool.

Size The thread size of 6an is 916-18 UNF.. Material Aluminum alloy 6061-T6.. Seal The AN flare is sealed at a 37 degree angle.. Parameters Working Pressure 1500PSI. Temperature range -40F to 250F.. Application AN6 tee fitting can work with oil, fuel, e85, fluid, coolant and air..

Fuel Pressure Take-off Fitting The fuel pressure take-off fitting is an AN6 male to -6 female with a 18 NPT gaugegage port. The thread size of the 6AN is 916-18 UNF.. Sealing The AN thread of the flare is sealed at a 37-degree angle, and the NPT thread is sealed with a 60-degree taper. It is highly recommended to use sealant or PTFE polytetrafluoroethylene tape on the NPT port.. Material The fitting is made of 6061-T6 aluminium alloy.. Parameter The maximum working pressure is 1,500 PSI. The working temperature range is -40F to 250F.. Application The fitting is widely used in fuel systems to add a fuel pressure gauge or sensor between fuel lines..

Size The thread size of the 6AN is 916-18 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The fitting is made of aluminum alloy 6061-T6 with a black anodized surface.. Seal The AN side of the flare is sealed by a 37-degree angle.. Feature The 360 swivel design makes it easy to install and helps save time..

Size AN6 916-18 UNF female swivel to male, 90 degree. Manufactured from lightweight 6061-T6 billet aluminum Anodized finish for strength, durability and anti-corrosion. 37 sealing angle guarantees a positive seal at maximum operating pressures Universal fit for fuel, oil, diesel or water lines. The forged full flow construction has a superior wall thickness and provides an uninterrupted flow. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size The thread size of 6an is 916-18UNF. The ID of the screw is 38 inch.. Seal The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.. Parameter Working pressure 1500psi Temperature range -40F to 250F.. Material Made of aluminum alloy 6061-T6.. Application Widely used in engine fuel rail, ls swap, transmission cooler, return line, fuel sensor, etc..

Size The fitting is female AN6 to female AN6. The thread size is 916-18 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40 to 250.. Sealing The AN side of the flare is sealed by a 37-degree angle.. Material The fitting is made of aluminum alloy 6061-T6 with a black anodized surface.. Feature The fitting is designed with a 360 swivel for easy assembly, and it can be reused and recycled..

Size AN6 916-18 UNF male flare to 38 inch 9.5mm push on hose barb, Pack of 2. Manufactured from lightweight 6061-T6 billet aluminum Anodized finish for strength, durability and anti-corrosion. 37 sealing angle guarantees a positive seal at maximum operating pressure. These AN to barb fittings are suitable for a wide range of automotive applications including Fuel, oil, diesel or water lines. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Thread Size The thread size of 6an is 916-18 UNF,tube sleeve used to 38'' OD stainless steel tube.. Material Made of aluminum alloy 6061-T6, the working temperature range is from -65 to 252.. Function The nut is used for the conversion of the alloy pipe and the fitting,the sleeve is used to fix the pipe and prevent it from moving, and the sleeve is sealed with a 37 degree and an outer flaring of the pipe.. InstallationNeed to install the tube nut and sleeve on the tubing first.Then use a 37 flaring tool to flare the end of the coiled aluminum stainless steel tube.Professional installation recommended.. Application Widely used in engine modification, refueling system, fuel system, brake system, cooling system..

Full Customization in One Kit This 23-piece kit includes 10x 6AN PTFE fittings 04590180, 4x male fittings, 4x hose separator clamps and exclusive wrench protectors Hose Reaming Tool. Mechanics-approved 92 of jobs completed with just 1 box. No more last-minute car tuning shop runs.. Say Goodbye to Leak CNC-machined from high quality aluminum not cheap cast metal, our 37 sealing angle 6AN PTFE fuel line fittings create strong seals. Built to withstand high pressure high temperature builds.. Hassle-free Installation 360 ptfe swivel hose end fittings lets you rotate fittings like a ball joint. All threads meet standard specs, compatible with 95 of AN brands. Unique to us PTFE hose assembly tool ensures fully hose-to-ferrule contact, stopping 80 of leaks caused by DIY hose prep.. Exclusive Wrench Protectors Scratched AN fittingsCorrosionWaste fuel system investment. Our AN Fittings wrench protector absorb 70 torque stress while protecting anodized fittings surfaces. Only included in BRIFITOR kits. Notes AN wrench is not included in this kit, you can buy it on our store.. Versatile Application Our 6AN PTFE fuel line kit mostly used in EFI LS system, fuel injection system, transmission system, oil cooler system, turbocharger system, ls engine swap, etc. Compatible with automotive fuelslubricantscoolantE85.. Notes Our AN fittings are CNC-machined to exacting standards, rigorously tested to ensure quality within our system. Manufacturing tolerances can vary between brands, you may encounter fitment challenges with third-party components. For optimal performance, recommend to use components from our brand..

Size The thread size of 6AN is 916-18 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting is only work with stainless braided and nylon braided hose. Material Made of aluminum alloy 6061-T6. Parameter Max Working Pressure 1500PSI. Working Temperature Range -40 to 248 -40 to 120. Feature 360 Swivel design for easy assembly. It can be reused and recycle.

Size The thread size of 6an is 916-18UNF. The ID of the screw is 38 inch.. Seal The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.. Parameter Working pressure 1500psi Temperature range -40F to 250F.. Material Made of aluminum alloy 6061-T6.. Application Widely used in engine fuel rail, ls swap, transmission cooler, return line, fuel sensor, etc..

Size 6AN male flare to 14 inch, the thread size of the 6 AN is 916 UNF. Fits to 14 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 14 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. NoteOnly applicable to stainless steel or aluminum hardline..

Full Customization in One Kit This 23-piece kit includes 8x 6AN barb fitting 04590180, 8x hose clamps, 4x male fittings, 2x hose separator clamps exclusive AN fittings wrench protectors. Mechanics-approved 92 of jobs completed with just 1 box. No more last-minute car tuning shop runs.. Say Goodbye to Leak Precision-machined from high quality aluminum, our 37 sealing angle 6an push lock hose fittings create perfect seals. 360 barbed teeth dig into hose liners, creating a mechanical grip 3X stronger than other push lock fittings.. Hassle-free Installation Just push the hose over the barbed end, the teeth self-guide for perfect alignment, 50 faster than regular AN fittings. Included stainless hose clamps grip 2X tighter, no more blown hoses. Ideal for NBR rubber push lock fuel hose use.. Exclusive Wrench Protectors Scratched AN fittingsCorrosionWaste fuel system investment. Our AN wrench protector absorb 70 torque stress while protecting anodized fittings surfaces. Only included in BRIFITOR kits. Notes AN wrench is not included in this kit, you can buy it in our store. Versatile Application Our 38 NBR push lock fuel hose kit only works with rubber hose on hydraulic system, transmission, fuel filter, fuel injection system, oil cooling system, marine fuel line, etc. Not compatible with PTFE or CPE hoses see description for hose requirements.. Notes Our fittings are CNC-machined to exacting standards, rigorously tested to ensure quality within our system. Manufacturing tolerances can vary between brands, you may encounter fitment challenges with third-party components. For optimal performance, recommend to use components from our brand..

- Material 6061-T6 lightweight aluminum alloy, anodized finish for durability.. - Compatible Fit for all CPE stainless braided and nylon braided hose, not fit for PTFE fuel line and rubber fuel line.. - Applicable Universal, such as suitable for all oilfuelwaterfluidairgascoolant pipes.. - Design The fixed pin can be adjusted 360 after installation. Excellent thread strength and 37 sealing surface ensure active leak proof sealing.. - Parameter Working temperature range -65 to 252 -53 to 122. Maximum working pressure 1500PSI.. - Package Include 4 X straight swivel fuel hose end..

AN6 45 degree fitting size 6AN fitting adapter thread size is 916-18 UNF 37 flare angle assures leak free performance. 6AN fitting adapter eliminates leaks due to poor solder joints or leaky O-rings due to CNC manufacturing process. AN6 45fitting adapter made of 6061-T6 CNC machined billet aluminum material with black anodized, making the Max working pressure up to 1500psi working Temperature range is from -65 to 252 . AN6 fitting adapter universal application for oil pumps fuel pumps or filters water fluid air line. AN6 fitting adapter is 360 swivel design completely reusable just disassemble and put onto another hose.

Size The thread size of 6an is 916-18UNF. The ID of the screw is 38 inch and 516 inch.. Seal The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.. Parameter Working pressure 1500psi Temperature range -40F-250F.. Material Made of aluminum alloy 6061-T6. Spring lock is made of plastic.. Application Widely used in engine fuel rail, ls swap, transmission cooler, return line, fuel sensor, etc..

Size The thread size of 6an is 916-18 UNF.. Parameter Max Working Pressure 4000PSI. Working Temperature Range -65 to 252 .. Material Aluminum alloy 6061-T6, anodized black surface.. Seal The AN flare is sealed by a 37 degree angle.. Application Widely used in fuel systems, such as fuel hose extends, return line, fuel cell, firewall, etc..

JIC -6 AN male and 2 x 6AN male thread 916-18 flare coupling Y block adaptor fittings, black anodized. CNC-machined from high performanc lightweight 6061-T6 billet aluminum alloy. Hard-anodized coating is compatible with alcohol, exotic fuel-additives, water and oil. One-piece design is compact and lightweight, high flow capacity, Y-Blocks feature AN Style Male inlets and outlets. Ensures the most direct path for unrestricted and redirected flow.

Size The thread size of 6an is 916-18UNF. The ID of spring lock is 38 inch and 516 inch.. Seal The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.. Parameter Working pressure 1500psi, Temperature range -40F to 176F.. Material Made of aluminum alloy 6061-T6. Spring lock is made of plastic.. Application Widely used in engine fuel rail, ls swap, transmission cooler, return line, fuel sensor, etc..

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp and 6an braided fuel line Length 20 Feet. Hose ID 0.31. Hose OD 0.56inch.. The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

6 AN male socket plugs hexagon head, 6 o-ring, 2 pack. CNC-machined from high performanc lightweight 6061-T6 billet aluminum alloy. Hard-anodized coating is compatible with alcohol, exotic fuel-additives, water and oil. Black anodized finish for long last, durability and strength.

Include a universal 12Ft fuel hose and 6 x swivel hose ends 2 x AN-10 to AN-6 Fuel Tank Fitting Adapters. The included swivel hose ends are rotary for convenient operation Fitting Type Straight, 45 Degree, 90 Degree. CNC machined items, based on premium stainless steel T6061 alloy aluminum materials. With anodized surface, it is hard and solid Working Temperature -40 to 350 Working Pressure 1500 PSI. Not Legal in the state of California New York, Not complies with C.A.R.B. regulations.

Specification AN8 FEMALE to AN6 MALE. CNC-machined from 6061-T6 aluminum.. Black anodized for great appearance and anti-corrosion. Suitable for most fluids. Removable and reusable.

Specifications The thread size of this bulkhead fitting including the main body and lock nut is AN6 916-18 UNF.. Thickness Adaptability Forms a seal in panelbulkhead thicknesses ranging from 1 mm to 8 mm, suitable for engine compartmentfirewall penetration.. Easy Installation The fixed locking nut can rotate freely on the threaded body. Both sides feature hexagonal flats, enabling one-handed installation in confined spaces.. Reliable Sealing The 37flared end fits AN specification pipes perfectly, effectively preventing fluid leakage. High-strength aluminum and anodized treatment enable it to function normally in harsh environments.. Service Prioritizing Your Shopping Experience. Devoted to Supplying Top Products and Excellent Service, Contact Us for Swift and Dependable Replies..

Size ID of 6an fuel hose0.318mm,OD0.5614.3mm.Length10ft.. Parameter Working pressure750psi,burst pressure2250psi Temperature range-22F to 248F 30C to 120CMin bending radius63.5mm.. Application 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.. Material 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength.. Max working pressure 1000psi. Working Temperature Range -65 fahrenheit degrees to 252 fahrenheit degrees-53 degrees celsius to 122 degrees celsius.. 6AN swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose.. These full flow swivel hose ends swivel 360 to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle.. Weld free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. Recommend a bit of assembly lube to help prevent any galling..

Build your own custom -AN transmission lines with these -6AN fittings. Compatible with GM transmission case holes, up to 2007. Compatible with TH350, TH400, 4L60E, 700R4, 200-4R, TR6060, Ford AOD 4R100, 4R70W, and C5 transmissions. Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum. Includes 2 fittings and orings.

100 QUALITY MATERIALNylon Braided CPE Synthetic Rubber The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum.. EFFECTIVELYThe fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.6an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on.. USEFULInner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature -40 F to 248 F-40C to 120C under most operating. Working Pressure500 PSI. Package Including10pcs 6AN hose fitting 16Ft AN6 Stainless Steel Oil line 6pcs 6AN Hose Separator Clamp 2pcs 6AN male coupler. 100 SATISFACTIONIf you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 6pcs 6an hose separator clamp,2pcs 6an to 6an Fitting and 6an braided fuel line Length 20 Feet. Hose ID 0.34. Hose OD 0.54inch.. 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Fit Type Vehicle Specific. Package Dimensions 3.81 H x 13.716 L x 6.604 W centimetres. Country of Origin United States. Package Weight 0.200 pounds.

Package Dimension 5 L x 2 W x 1 H. Country of Origin UNITED STATES. Model Number 229006-BL. Item Package Weight 0.09 pounds.

Standard Size The 6an fitting thread size of 6an is 916-18 UNF with 6AN female swivel on run.. Durable and Rust-proof 6 an fittings are made of 6061-T6 aluminum, the surface is black anodized.. Perfect Fit 6an fittings with 37 degree thread seal design to ensure reliable sealing under maximum working pressure.. Wide Application AN6 fittings are suitable for various automotive applications including fuel, oil, diesel or water lines.. Widely CompatibleThe an6 fittings and adapters are highly compatible with various media, including fuel, oil, water, and others..

Product NamePlastic Push to connect fittings. Size6mm OD. Pressure Range0145PsiTemperature Range32140F. AdvantagesHigh pressure resistance, easy installation and long service life.. OthersEasy to install Available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.

Package Included 2PCS 6AN 90 Degree Swivel Hose End Fittings.. Thread size of 6AN 916-18 UNF. The AN side is sealed by a 37 degree angle.. Material 6061-T6 aluminum alloy.. Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. Compatible with nylon braided CPE fuel hose. Not for PTFE hose, E85, rubber hose..

Package include 2pcs 6AN Female to 6AN Female Straight Swivel Coupler Union Fitting Adapters. Thread size of 6AN 916-18 UNF.. Max Working Pressure 1500PSI. Temperature Range -65 to 252.. Material 6061-T6 aluminum alloy. Anodized black surface.. Sealing The AN side of the flare is sealed by a 37 degree angle..

Package include 2pcs 6AN Straight Push Lock Hose Fitting. 6AN to 38 inch barb. Thread size of 6an 916-18UNF. The barb fitting only work with rubber fuel line. Material 6061-T6 aluminum alloy. Working pressure 1500PSI. Temperature range -40 to 248. Easy to install. It is recommended to use clamps to enhance sealing.

Package include 4pcs 6AN Straight Push Lock Hose Fitting. 6AN to 38 inch barb. Thread size of 6an 916-18UNF. The barb fitting only work with rubber fuel line. Material 6061-T6 aluminum alloy. Working pressure 1500PSI. Temperature range -40 to 248. Easy to install. It is recommended to use clamps to enhance sealing.

Package Included 2PCS 6AN to 6AN Male Flare Coupling Union Adapter. Thread size of 6AN male coupler is 916-18 UNF, can use to splice or extend a line, works with female thread fitting.. Work temperature -65 to 252 degree F. Max pressure 1500 PSI. Ultimate torque 25N.. Works with swivel fitting, push lock fitting and female AN fittings. Please match the correct size.. For fuel system, such as fuel hose extend, line connect to fuel filter, fuel pump and cooler system..

Package include 2pcs 6AN Female to AN6 Male Flare 90 Degree Swivel Fitting Adapte. Max Working Pressure 1500PSI. Temperature Range -65 to 252. Material 6061-T6 aluminum alloy. Black anodized surface.. The AN thread of the flare is sealed by a 37 degree angle. 360 swivel design, easy to install and save time.. The thread size of 6AN 916-18 UNF..

Nylon Braided CPE Fuel Line Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.. Universal Application The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided add CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Safety Features For Your Protection Fuel Hose Size 6AN, Length 12FT, Working Temperature -100 F to 500 F, Pressure Tolerance 350 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. Package Includes 1 6AN 12FT Nylon Braided Hose, 2 Straight Swivel Hose Ends, 2 45 Degree Swivel Hose Ends, 2 90 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..

Convenient and Environmental Protection - you can easily disassemble and install it, just use the tools in your garage, then the project will be more perfect. The material of the hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line.If you are a person who cares for the environment, this will be a good choice. Firm and Neat - our hose separators are used to improve the tightness between multiple tubes, then your line will become more organized and neat. And the project will become more pleasing. It will be very necessary, especially in cars or other small spaces. Strong Compatibility and Reusable - This product is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on. More Choices - We can provide 4AN, 6AN, 8AN, 10AN hose separator clamps for you, of course, you can choose the Black or Blue for your project. So you will get the right items that you want, and don't need to spend more time looking for others. After-Sales and Customer Service - SYKRSS is the responsible brand, We value your shopping experience, if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible. Please review the specifications prior to placing your order.

IF HAIR LOSS RUNS IN YOUR FAMILY, the CapillusRX formerly known as the Capillus312 laser hair growth therapy cap may be right for you. Capillus laser therapy can help reverse the process of hair loss in both men women with hereditary hair loss.. CLINICALLY PROVEN FDA CLEARED, the CapillusRX is as a safe and effective treatment for hereditary hair loss identified by overall thinning hair, a receding hairline and pattern baldness. Now, you can help regrow your hair at home or on-the-go with the laser devices previously available only through physicians.. MAXIMUM COVERAGE JUST 6 MINUTES EVERY DAY. With 380 times the coverage of the Ultra 82 model, comfortably treat your scalp with the flexible fitting CapillusRX in the time it takes to drink your morning coffee.. RECOMMENDED BY OUR NETWORK OF PHYSICIANS to grow thicker, fuller hair. Can be used in conjunction with topical hair loss foams, prescription medications, or before and after hair transplant surgery. Not all laser hair regrowth products are created equally. Unlike some gadgets, the medically prescribed CapillusRX cap features laser only technology with no LED lights.. ASSEMBLED IN THE USA with ISO13485 quality control certified processes. Our US-based customer service support are available to answer any questions..

Edelbrock's RD staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket - they live it - and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature.. Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team.. Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.. In a day and age where we are seeing more products sent overseas to be manufactured, Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities.. Edelbrock facilities have earned the world recognized ISO 9001 2008 registration for quality..

Use these fittings to adapt a -6 AN hose end to a 38 NPT taper thread port. 37 degree flare fitting automotive standard. Machined aluminum finish. Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum. See thread chart photo in this listing to identify your fitting size.

Fuel Hose FeaturesBlack braided nylon fuel hose features an all-black nylon fiber braided outer cover and a Chlorinated Polyethylene CPE synthetic rubber inner line. Maximum Working Pressure psi 500 psi. Bursting Pressure psi 2000psi. Working Temperature -40 to 350. Hose End Fittings FeaturesDesigned For Smooth Flow, the hose end fittings are made of high-quality aluminum alloy material for strong strength. Polished and anodized surface provide the bright appearance and corrosion protection.. Compatible WithMostly worked with coolant, fuel, diesel, oil, hydraulic fluid, pump gas, alcohol and air. NOT FIT E85. 6an nylon braided hose can be used in brake system, pump, oil return, fuel return system, turbo cooler system and transmission system.. Safety FeaturesNylon fiber and stainless steel braid 6an cover for excellent flexibility and resistance to abrasion. 38 Braided nylon CPE fuel line can be used for a long time at -40 to 100 oil temperature. Not recommended installation in corrosive environment, 6an braided fuel line's service life will be influenced. Outer nylon braided has excellent inflaming and safer to use.. You Will GetThe 6an nylon braided fuel line kit includes 38 braided fuel line Length16ft5M and 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree Inner Diameter 8.73mm0.34inch - Outer Diameter 14.22mm0.56inch.