Size NBR fuel hose ID 5816mm, OD 0.9424mm. Length 10 feet. Push lock fittings The thread size of 8an is 78-14UNF.. Parameter Fuel hose Working Pressure 150psi. Burst Pressure 600psi.Temperature Range -40F to 257F.Minimum Bend Radius 6.3160mm. Fittings Max pressure 1500PSI. Temperature range -40 to 248.. Medium Compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Package includes 1Pc 58 30R7 fuel hose 10ft, 2pcs 10AN straight push lock hose end and 2pcs 10AN 90 push lock hose end.. Application The push lock fuel line kit widely used for fuel system,oil cooling,steam emission, etc..

HIGH QUALITY STAINLESS STEEL- The whole hose clamp including the band, housing and screw are all made of premium 304 stainless steel material. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable.. WIDE ADJUSTABLE SIZE RANGE- Clamps are flexible and ductile with wide adjustable size 38'' - 58''10-16mm. Fit for hose outside diameter 10-16mm.. WIDELY USED- Clamps are widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boatmarine, shield, household etc. both indoor or outdoor.. Band width of 516-inch.. ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..

Premium NBR Rubber with Polyester Reinforcement - Made of durable NBR fuel line material with braided polyester fibers 3mm wall thickness for superior oil, heat, and abrasion resistance, ensuring long-lasting performance.. High-Pressure Extreme Temperature Resistance - Rated for 300 PSI working pressure 1200 PSI burst pressure and withstands temperatures from -40F to 257F -40C to 131C, making it ideal for all climates and tough conditions.. 58 ID tubing hose 20FT Length 5PCS Clamps Included - Provides ample tubing for various applications lawn mowers, ATVs, tractors, etc. and comes with 5 appropriate sized clamps for a secure, leak-free fit.. Push-Lock Design for Quick Easy Installation - Features a reinforced push-lock connector for effortless setup without leaks, saving time and effort during repairs or replacements.. Upgrade your small engine equipment with the MSLANE Fuel Line Hosea high-performance, durable solution designed for lawn mowers, cultivators, ATVs, tractors, and more. Crafted from reinforced NBR rubber, this fuel line hose ensures superior resistance to oil, heat, and abrasion, making it a reliable choice for your automotive fuel system needs.

516 Fuel Line Hose Widely Used Multipurpose fuel hose that can be used as a fuel line, PCV connection, ethanol resistant, emission control line or fuel return line.. High Quality Material Fuel Hose Made of NBR rubber, resistant to diesel, gasoline, lubricating oil, hydraulic oil, coolant, etc, Also available in unleaded gasoline, diesel, ethanol E-10, E-85 and sour gas blends.. Fuel Hose Size Inner Diameter ID 516 0.3125, Outer Diameter OD 0.5514mm, Length 25FT.. Working Pressure and Temperature Range 150 psi Burst Pressure 500 psi, -40F to 257F -40C to 125C.. After-Sales Service Buy with confidence. We offer free returns and exchanges, if you have any questions, please feel free to contact us by email..

Size 58 Fuel line ID 0.63inch Hose OD 0.94inch Length 20 Feet. Hose Clamp 19-29mm.. Pressures Temp Range Maximum Working Pressure 600psi, burst pressure 1000psi Temperature range -4F to 212F-20C to 100C Min bending radius 96mm.. Suitable for Widely Usage The 58 push lock fuel hose is widely used with fuel filters, oil pumps, fuel tanks, fuel pressure regulators, oil coolers, etc.. Material Compatibility The 58 10AN fuel line features a CPE outer layer,an NBR rubber inner layer and polyester coated thread in the middle. This high pressure cpe fuel hose is compatible with petrol, diesel, oil, engine oil, fuel, and so on.. InstallationEasy to install, push to lock and use clamps to enhance sealing. Please measure before purchase.

Specifications ID 5816mm OD 0.9424mm. Minimum Bend Radius 7.6192mm. Wall thickness 4mm.. Parameter Working pressure 150 PSI. Burst pressure 600 PSI. Temperature range -40F to 257F.. Medium The NBR fuel hose is compatible with diesel, oil, gasoline, biodiesel, grease, and more.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel systems, oil cooling, and more..

5 Size Fuel Line Hose Kit This kit includes the most common hose size, 38 516 14 12 316 5FT with appropriate sized clamps 25pcs. A variety of fuel hose at the ready for times when you need them, enough variety and length for nearly any project. High Performance The tubing hose is made of premium NBR braided Polyester Fibers material, 3mm wall to ensure thick and flexibledurability and resilience. Working Pressure 300PSI. Burst Pressure 1200PSI. Temperature range -40F to 257F-40C to 125C. Effort Saving And Time Saving These fuel lines are a must-have addition to your toolbox. From vehicles to ATVs to small engines and everything in between, It is nice for having around the shop barn for the multitude of equipment at the ready for times when you need them, Will making repair easier. WIDELY USEFUL The push lock reinforced rubber NBR fuel lines widely used in lawn mowerscultivatormotorcyleATV's tractors and other small engine equipment, automotive fuel systems, steam emission, oil cooling. Please check the application pressure before purchase. Reliable Customer Service Shineyoo always focuses on product quality and service. If You Have Any questions, Please Contact With Us, We Are In 24 Hours Service.

Size ID 58 16mm, tolerance is 0.5mm OD 0.94 24mm, tolerance is 0.6mm Length 5 feet.. Material Made of EPDM rubber.. Parameter Working Pressure 100psi Burst Pressure 300psi Temperature Range -40F to 257F Min Bending Radius 128mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements.. Medium Compatible with coolant, water, antifreeze, etc.. Application Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc..

Size ID 58 16mm, tolerance is 0.5mm OD 0.94 24mm, tolerance is 0.6mm Length 10 feet.. Material Made of EPDM rubber.. Parameter Working Pressure 100psi Burst Pressure 300psi Temperature Range -40F to 257F Min Bending Radius 128mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements.. Medium Compatible with coolant, water, antifreeze, etc.. Application Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc..

CompatibleMostly worked with coolant, fuel, diesel, pump gas, alcohol and air. NOT FIT E85. 8an nylon braided hose can be used in brake system, pump, fuel return system, turbo cooler system and transmission system. Applicable sceneThe 10an nylon braided fuel line kit includes 6pcs 10an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree and 10anbraided fuel line Length 10feet. Hose ID 916. Hose OD 0.783inch. Please measure before purchase. Fuel Hose FeaturesBlack braided nylon fuel hose features an all-black nylon fiber braided outer cover and a Chlorinated Polyethylene CPE synthetic rubber inner line. Maximum Working Pressure 500 psi. Bursting Pressure 2000psi. Working Temperature -40 to 257. Fittings Features Designed For Smooth Flow, the hose end fittings are made of high-quality aluminum alloy material for strong. Polished and anodized surface provide the bright appearance and corrosion protection. Safety noteNylon fiber and stainless steel braid 10an cover for excellent flexibility and resistance to abrasion. 58 Braided nylon CPE fuel line can be used for a long time at -40 to 100 temperature. Not recommended installation in corrosive environment, 8an braided fuel line's service life will be influenced. Outer nylon braided has excellent inflaming and safer to use. PERFERCT EXPERIENCE ACmango provide this product have 30-day money-back. Refund or replace your purchase without worrying about fees Please contact us first for any question, we will reply you within 24 working hours.We value your shopping experience and strive to provide quality product and service.

FUEL HOSE SIZE ID 516 8mm, OD 0.55 14mm, Length 10FT.. MATERIAL The fuel hose is made of NBR and polyester fiber, oil and wear resistant.. DURABLE CONSTRUCTION Fuel Line is made of premium NBR material, which has Oil resistance, heat resistance, flame resistance, sunlight resistance, ozone resistance, acid and alkali resistance, chemical reagent resistance.. WIDE APPLICATION Fuel Line can be widely used in oil pipelines for automotive internal combustion engines, mechanical equipment, etc. Tip please check the pressure of application before purchase.. CUSTOMER SERVICE Purchase the Fuel Line Hose with confidence. If you have any question, please contact us by email. We will give you a satisfactory reply..

Parameter This 6AN braided fuel line can withstand high pressure and has a long-lasting lifespan. Maximum working pressure 750 PSI. Bursting pressure 2,250 PSI. Temperature range -22 to 248.. Material The 6AN hose has a CPE rubber inner layer, a layer of 304 steel wire, and a nylon outer braid.. Compatibility The braided fuel hose is compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel, fuel, and more.. Suitable for Widely Usage The 6AN braided fuel line is used for many purposes, including transmission oil cooler lines, fuel return lines, fuel supply lines, coolant fluid hoses, fuel gauge lines, vacuum lines, turbo cooler lines, and oil feed lines.. Size and Installation Hose ID 0.31 inch Hose OD 0.56 inch Length 20 Feet. Installation instructions are included.It works with 6AN swivel hose end only..

Size ID 58 16mm, tolerance is 0.5mm OD 0.94 24mm, tolerance is 0.6mm Length 10 feet.. Material Made of EPDM rubber.. Parameter Working Pressure 100psi Burst Pressure 300psi Temperature Range -40F to 257F Min Bending Radius 128mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements.. Medium Compatible with coolant, water, antifreeze, etc.. Application Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc..

Size ID 58 16mm, tolerance is 0.5mm OD 0.94 24mm, tolerance is 0.6mm Length 5 feet.. Material Made of EPDM rubber.. Parameter Working Pressure 100psi Burst Pressure 300psi Temperature Range -40F to 257F Min Bending Radius 128mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements.. Medium Compatible with coolant, water, antifreeze, etc.. Application Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc..

Size The 58 fuel line Hose ID 5816mm Hose OD 0.9424mm Hose Length 10FT Min Bend Radius 6.3160mm Hose wall thickness 4mm. Parameter The 58 fuel hose Working pressure 150psi Burst pressure 600psi Temperature range -40F to 257F. Material Our 58 fuel line is made of NBR rubber and braided polyester fiber, oil and wear resistant. Medium SAE 30R9 NBR rubber fuel line fits for diesel, oil, gasoline, biodiesel, grease, etc. Using VehiMata fittings for optimal performance. Usage The fuel hose reaches and exceeds SAE 30R9 standard, can be used for fuel system, oil cooling system, steam emission system, etc. Note We advice Barbed Fitting Adapters from VehiMata for a better compatibility.

10AN 20FT Fuel Line Hose Kit with Fitting, Stainless Steel Braided 58 CPE Fuel Oil Hose- 14.27mm ID. Packaging includes20FT Stainless Steel Braided Fuel Line . AN10-0 Degree fitting 4,AN10-45 Degree fitting 2,AN10-90 Degree fitting 2,AN10-180 Degree fitting 2,Clamp 2,AN10 wrench 1. The 10AN hose working temperature range -40 to 257 -40 to 125. It is compatible with nearly every substance or agent used. Maximum Working Pressure psi 500 psi. Bursting Pressure psi 2000psi..

Size 58 Heater hose ID 58 15.9mm, ID Tolerance 0.4mm Hose OD 151623.9mm, OD Tolerance 0.4mm Hose Length 5 Feet.. Parameter Working Pressure 60 psi Burst Pressure 246 psi Temperature Range -67F to 356F -55C to 180C Minimum Bend Radius 79.5mm. Meets SAE 20R3 Class A requirements.. Material The heater hose is constructed with braided polyester fiber and silicone inner and outer layers. Compared to EPDM material, silicone withstands a greater temperature range and lasts longer.. Application Transport air, steam, water, coolant, weak acid and alkaline. Suitable for automotive cooling systems, heating systems, water heaters, etc.. Note Silicone heater hose is not for carrying alcohol, fuel, engine oil, or lubricants..

Can be easily connected to the hose. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Temperatures range from -40 to 160 F. Connections Hose Barb x Hose Barb x Hose Barb. 58 Barbed fitting has three openings for connecting your 58 ID hoses.

Size 58 Inch16mm ID0.924mm OD Length 6.6Feet. Material Made of premium NBR rubber material, braided with fiber cord, features with high temperature, cold resistance as well as flexibility and durability. Serve for a long time.. Widely Application Widely used in the fuel system,cooling system, steam emission of cars, trucks and buses.. Working Pressure 217psi. Max Working Pressure 300psi. Burst Pressure 1200psi. Temperature Range -40F to 257F-40 to 125.. Flexible and Handy The flexibility and superior bending ability of this fuel line make it easier to install. It can be cut to size as you want for all your applications. Use hose barbs and fuel line clamps to install..

Size ID 58 inch 16mm, OD 1inch25mm, Length 25FT. Material This SAE 30R7 small engine fuel line is made of high-quality NBR, which is oil resistant.. Working temperature range -40F to 257F. Working pressure300psi. Burst Pressure 1160psi. Please check the working pressure and temperature of your system before purchase. Wide application Fuel Hose widely used in fuel system, PCV system, steam emission, oil cooling. The rubber fuel line hose can be compatible with oil, diesel, grease, biodiesel, gasoline, hydraulic, water and air for use in cars, buses, trucks,boat, motorcycle,harley and more..

58 Fuel Line This 10AN fuel line measures 10 ft long with a 0.63 inner diameter and 0.94 outer diameter, perfectly suited for 58 push lock fuel hose systems. It comes with 1929 mm hose clamps. Please verify size before purchase for a perfect fit. Pressure Temperature Reference Rated for up to 600 PSI working pressure and 1000 PSI burst pressure, this 58 fuel hose performs reliably from -4F to 212F -20C to 100C and bends easily with a minimum radius of 96 mm. Perfect for Fuel System The 58 hose serves as a replacement fuel line for fuel filters, oil pumps, fuel tanks, fuel pressure regulators, oil coolers, and fuel return line hose setups. It is built to deliver consistent performance in everyday automotive use. 3-Layer Construction The 10AN fuel hose features a CPE outer layer, an NBR rubber inner layer and polyester coated thread in the middle. This CPE fuel line is compatible with petrol, diesel, fuel, engine oil, and more. Easy Push-Lock Installation The push-to-lock 58 fuel line hose allows quick, hassle-free installation. Hose clamps are included for a secure seal, making it an ideal replacement fuel hose for fuel system maintenance.

The fuel line assembly compatible with ethanol blended fuels, meets and exceed fuel flow requirements for OMC outboards. suitable for Boats, RVs, Tractors, and Caravans.. This marine universal fuel line assembly inner diameter 3810mm, outer diameter 58 16mm, Hose long line 6ft .. Outboard motor fuel line with primer bulb allow greater fauel flow, to maximize the performance.. The marine fuel line primer bulb assembly includes rubber fuel line, premium quality rubber bulb and stainless steel clamps, it have resists leaking and hardening.. Note The outboard motor gas line is made of rubber product, please do not store this item under direct sunlight, high temperature or other rough environment..

Heater Hose Size ID 58 16mm, OD 0.94 inch 24mm, Length 5FT.. Material Outer layers Features a durable silicone hose construction, Inner layers features reinforced polyester braid outer blue, inner orange, Silicone withstands a greater temperature range and lasts longer.. Working pressure 60 PSI, burst pressure 232 PSI, Extreme temperature resistance -20C to 220C.. Application Transport air, steam, water, coolant, weak acid and alkaline, Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir. But please don't use our radiator hose for oil to avoid causing safety problems.. Radiator hose Flexible Easy to Install, easy to cut, Compatible with most engine cooling and heating ports..

Size ID 58 16mm, OD 0.9 inch 23mm, AN10 Fuel Hose, Length 10FT.. Material This small engine fuel line is made of high-quality NBR, which is oil resistant.. Working Pressure 0.6Mpa, Burst Pressure 1.8Mpa, Temperature Range -40F to 248F.. Application Designed for conveying gasoline, diesel, biodiesel fuel, engine oil or water in car, truck, bus, automotive, etc. Please check the pressure of application before purchase.. How To Use Use hose barbs and fuel line clamps to install..

5816mm, OD 0.9424mm. Length 10 feet. Push lock fittings The thread size of 8an is 78-14UNF.. Fuel hose Working Pressure 150psi. Burst Pressure 600psi.Temperature Range -40F to 257F.Minimum Bend Radius 6.3160mm. Fittings Max pressure 1500PSI. Temperature range -40 to 248.. The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc. The barb fitting works only with rubber fuel lines. This fitting is easy to install. It is recommended to use clamps to enhance sealing. The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant. 4pcs fittings are made of aluminum alloy 6061-T6. 4pcs hose clamps are made of 304 stainless steel. The 10AN female end features deep, full-depth threads for excellent leak resistance.. The push lock fuel line kit widely used for fuel system, oil cooling, steam emission, etc.. 1Pc 58 30R7 fuel hose 10ft, 2pcs 10AN straight push lock hose end and 2pcs 10AN 90 push lock hose end, 4pcs 304 stainless steel hose clamps..

VALUE PACK This pack includes 48pcs barb splicer mender hose fittings and 96pcs hose clamps18-4pcs,316-8pcs,14 -15pcs,516-5pcs ,38 -10pcs,12 -4pcs,58-1pc,34-1pc8-12mm hose clamp-35pcs,9-16mm hose clamp-35pcs,13-19mm hose clamp-26pcs.Sufficient quantity and various sizes can meet your daily pipe connection needs and enrich your inventory. PREMIUM MATERIAL Our brass barb splicer mender hose fittings are made of quality brass material, while the hose clamps are constructed from resilient stainless steel. The reliable materials ensure the durability and longevity of our fittings and clamps, offering you a reliable tool that's built to last. FIRM CONNECTION Our brass barb splicer mender hose fittings, along with the included stainless steel hose clamps, create a secure, leakproof connection every time. The robust design and the firm grip of our clamps ensure a no-worry connection that withstands the test of time. EASY TO CONNECT Both ends of the hose barb can be connected to a hose, a flexible joint that connects two hoses with the same diameter. The size is in line with the standard, the connection with the hose is tight, the sealing is strong, and it is not easy to leak. WIDE APPLICATION Our brass barb splicer mender hose fittings are suitable for pipe repair, various hoses can be attached to these hose barb fittings, and they are applied to assist in transporting natural gas, oil, air, fuel, and water to meet your various needs.

APPLICATION- For racing fuel, pump gas, diesel, motor oil coolant etc. Nylon braided fuel hoses can be used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line.. WORKING ENVIRONMENT-Maximum Working Pressure725psi5mpa. Bursting Pressure2465psi17mpa. Working Temperature Range-40 to 338-40 to 170.. SIZE- length10 feet3M. Inner diameter0.56 inches 14.2 mm. Outer diameter0.79 inches 20.10 mm.. MATERIAL- Inner layerCPE synthetic rubbermiddle layer304 stainless steel wire mesh sleeveouter layerbraided nylon. Resistant to high temperature pressure abrasion and aging. Excellent flexibility and flame retardancy.. NOTE- Double check the hose size before bidding. Our rubber hose is compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT.NOT FIT FOR E85..

Reinforced Tubing Details - 58 in inner diameter, 78 in outer diameter, 18 inch wall thickness, 10 feet length. Max working pressure 90 psi Burst pressure 270 psi Minimum bend radius 2.5'' Temperature range 25f to 150f -4c to 66c Firmness 73a firm. Exceptionally Durable and Pressure-Resistant- Our 58 ID x 10 ft suction hose is engineered with top-tier PVC , and reinforced with spiral steel wire for unmatched durability and robust construction. Designed to withstand high burst pressures, making it the ideal choice for demanding applications. Universal Compatibility Ease of Use -Designed for hassle-free setup, this hose fits a wide range of accessories and adapters. Its reinforced design prevents kinking and blockages, ensuring smooth and efficient water flow. Versatile for Multiple Applications-This wear-resistant, chemical-resistant, and anti-UV clear reinforced hose is ideal for various settings. Whether for garden sprinklers, well pumps, or as a pond, trash, or bilge pump hose, it meets diverse needs. Customer-Centric After-Sales Service-Your purchase is backed by a dedicated after-sales service team that is committed to providing a satisfactory experience. From installation assistance to after-sales service, we are here to support you and ensure that our suction hose exceeds your expectations.

APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications.. WORKING ENVIRONMENT-Maximum Working Pressure725 psi5 mpa. Bursting Pressure2175psi15 mpa. Working Temperature Range-40 to 392-40 to 200.. SIZE- length10 feet. Inner diameter0.51 inches 12.95 mm. Outer diameter0.63 inches 16 mm.. MATERIAL- Inner layer PTFE Teflon rubber middle layer 304 stainless steel wire mesh sleeve outer layer braided nylon. PTFE fuel lines are more resistant to high temperature and pressure.. NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

58 id Vinyl Hose is made of high-quality PVC materials, reinforced with spiral steel wire, heavy duty, rigid with good flexibility, clear, small bending radius, negative pressure resistant, not collapse for suction, smooth interior and exterior.. Reinforced Tubing Details - 58 in inner diameter, 78 in outer diameter, 18 inch wall thickness, 10 feet length. Max working pressure 90 psi Burst pressure 270 psi Minimum bend radius 2.5'' Temperature range 25f to 150f -4c to 66c Firmness 73a firm. Excels on the suctiondischarge sides. - The wire reinforced hose is absolutely perfect for the suction side as it's rigid enough not to collapse yet flexible enough for nearly any application, and it works well on the discharge side too.. Versatile - Clear reinforced hose is wear-resistant, chemical resistant, anti-UV, widely used for drawing and conveying water, fuel and powder in industrial, factory, agriculture and household as pond pump hose, trash pump intake, dust collection hose, bilge pump hose, marine reinforced hose, clear fuel hose, hydraulic return hose, oil drain hose, aquarium pump tubing, siphon vacuum hose, wood splitter hose and so on.. Service - The 58 inch suction hose fully meets your suction and discharge needs, choose it and get great value for money. If you have any questions, please feel free CONTACT US, we will provide solutions within 24 hours..

Preferred PVC Material. DAVCO braided tubing is made of high quality PVC, reinforced with high density polyester yarn braided, superior strength and sturdy.The service life of the hose is 3 times that of the ordinary hose.. Tubing Details. DAVCO Clear flexible hose, 58 inch ID, 78 inch OD, 10 ft length, can withstand 200 psi working pressure.. Anti Kink Not stiff. DAVCO braided tubing is specially reinforced by thick wall, not easy to knot, lightweight and flexible, not stiff. has excellent weather resistance, kink proof, and can handle various chemicals, moisture and abrasion. The inner and outer surfaces are smooth, easy to flow and clean.. High standards. DAVCO braided tubing uses professional technology and teams. The DAVCO brand has high requirements for products, and every product that is manufactured must go through 5 inspection and testing stagesensuring that every product meets our high expectations. In addition, Our team in Los Angeles, CA is fully committed to providing 7x24 customer technical support. Thus ensuring that customers have a good shopping experience.. Great value for money. DAVCO braided tubing is made with Premium materials and advanced technologies but at an affordable price. Saving you money while giving you quality filtration.. Non-toxic. DAVCO braided tubing uses non-toxic materials, BPA free, can be directly used in the aquarium water supply hose, safety and security.. Less Labor And Time. DAVCO braided tubing is easy to unfold and use, can also be rolled up and stored well, ideal time and effort saving hose.. Multipurpose. DAVCO braided tubing is used for a wide range of low to high-pressure applications such as delivery water, gas, air, oil, fuel, ideal for your multi-purpose needs from landscape water line to automation machinery and pneumatic lines.. Experienced and professional. DAVCO is a professional brand that is committed to the water hose production industry. For the past 10 years, our products have been sold all over the world, and countless families have used or products as their solution..

ID 58 16mm, OD 0.94 24mm, Length 10 feet. Min Bending Radius 72mm. EFFICIENT FUEL FLOW - Designed with a working pressure of 100psi and burst pressure of 300psi, the 58 heater hose guarantees strong performance and efficient fuel flow.. WIDE TEMPERATURE RANGE - This 58 coolant hose is engineered to withstand extreme temperatures ranging from -40F to 257F, making it suitable for use in various environments. The 58 heated hose excels in both hot and cold conditions, ensuring optimal performance.. PREMIUM CONSTRUCTION - The 58 fuel line is expertly crafted using high-quality materials, including a durable EPDM tube and two spiral layers. This ensures exceptional durability and performance, making it perfect for automotive and truck cooling system applications.. FOR MOST FLUIDS - The 58 radiator hose is compatible with popular coolants like LLC, OAC, and Sierra, as well as water, antifreeze, and other fluids. This makes it ideal for a wide range of applications, including hot water heaters, engine cooling systems, and connecting radiators to overflow reservoirs.. MULTIPLE USES - The heater hose is a versatile and reliable option for various automotive and industrial applications. It is the perfect choice for hot water heaters, engine cooling systems, connecting radiators to overflow reservoirs, and more..

Size58 OD15.875mm,Length 10-Feet,Wall thickness 0.035-inch0.9mm .Well packaged to protect the product well during transportation.. FeatureThe 58 aluminum fuel line Easy to bend, unroll, cut, form, straighten, Stable quality.Easy to work with and long lasting fuel line replacement option for professionals and do-it-yourselfers.. Material Made of aluminum alloy, extruded, with good processability and corrosion resistance.. Usage Use for hydraulic braking systems, fuel systems, and transmission systems, a 58 metal fuel line frome tank to pump, transmission cooler lines and so on.. Maximum working pressureMaximum working pressure rating of 650 PSI, This 58 aluminum tube is versatile enough to handle a variety of applications..

Application Universal, Such as fuel, lube, coolant and air for automobiles or marine engines, most suitable for racing cars motor racing bikes etc.. Length5 ft, Inner Diameter 14mm 0.56, Outside Diameter 20mm 0.79.. Working Pressure 1000 PSI 69 Bar Burst Pressure 5000 PSI 345 Bar. Operating temperature -40 Degree F to 350 Degree F.. Braided fuel hose with special hand feel, maximized resistance to heat, corrosion and abrasion.. Material Outer Layer Quality Braided NylonMiddle Layer Stainless Steel WiresInner Layer CPE Synthetic Rubber..

Tubing Details - Black vinyl tubing, 58 inch 15.9mm inner diameter, 45 inch outer diameter, wall thickness 2mm, 10 feet length. Working temperature 23F to 149F -5C to 65C, Hardness 73A firm, Max working Pressure 60PSI. Can be used for low pressure applications.. Great flexibility and No kink - PVC tubing is made of high quliaty PVC material, non-toxic, lightweight, great flexibility, smooth interior and exterior for easy flow and flushing, Its walls are thick enough to prevent kinks.. Easy to use and storage - The black tubing is wear-resistant, resistant to aging, and resistant to acid and alkali chemicals. It can withstand rough handling and repeated use, easy to shape, bend and install, and can be easily cut with any cutting tool for your need length. It also coils easily for storage and transport.. Multi-purpose - The flexible tubing is ideal for general use such as water gardening, auto watering setup, pond, drain fish tanks and aquarium, aquaponics, hydroponic, drip irrigation, drain, water line, pumps, siphon, filters, air conditioning, humidifiers, props, plumbing, refrigeration, industrial applications for transferring liquid and gas.. Service - Because of its versatility and the ability to be used in a wide range of applications, it is a great value for your money. Any questions about the item, please CONTACT US. We will provide solutions within 24 Hours..

Inner Diameter 0.63 inch 16mm. Length 3.2 feet 1m. Wall Thickness 0.197 inch 5mm. 4-Ply Polyester Reinforced. Temperature resistance -60 to 260 C -76 to 500 F. For air and water only. Not for gas and oil. Quality tested to ensure long-lasting performance. 200 PSI Maximum pressure rating, Material stability Superb resistant to UV, water, ozone, oxygen and high temperature.

ID 58 inch 16mm, OD 0.9 inch 23mm, 10 AN NBR liner hose, 10 feet. Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines. Fuel Injection Hose Working Pressure 2Mpa. Burst Pressure 4Mpa, Handles temperature ranges of -40 to 275 degrees F. Push on lock hose designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc. The Fuel Lines for fuel injected systems, are oil resistant,cold-resistant and ethanol tolerance.

Clear Wire Reinforced Hose is made of high-quality PVC materials, reinforced with spiral steel wire, heavy duty, rigid with good flexibility, clear, small bending radius, negative pressure resistant, not collapse under suction, smooth interior and exterior, widely used for drawing and conveying water, fuel and powder.. Reinforced Hose Details - 58 in inner diameter, 78 in outer diameter, 18 inch wall thickness, 25 feet length. Max working pressure 90 psi Burst pressure 270 psi Minimum bend radius 2.5'' Temperature range 25f to 150f -4c to 66c Firmness 73a firm. Excels on the suctiondischarge sides. - The wire reinforced hose is absolutely perfect for the suction side as it's rigid enough not to collapse yet flexible enough for nearly any application, and it works well on the discharge side too.. Versatile - The clear tubing is wear-resistant, chemical resistant, anti-UV, usually used for industrial, factory, agriculture and household as pond pump hose, trash pump intake, dust collection hose, bilge pump hose, marine reinforced hose, clear fuel hose, hydraulic return hose, oil drain hose, aquarium pump tubing, siphon vacuum hose, wood splitter hose and so on.. Service - The reinforced vinyl tubing fully meets your suction and discharge needs, choose it and get great value for money. If you have any questions, please feel free CONTACT US, we will provide solutions within 24 hours..

Application Universal, Such as fuel, lube, coolant and air for automobiles or marine engines, most suitable for racing cars motor racing bikes etc.. Length5 ft, Inner Diameter 0.56 14mm, Outside Diameter 0.79 20mm.. Working Pressure 1000 PSI 69 Bar Burst Pressure 5000 PSI 345 Bar. Operating temperature -40 Degree F to 350 Degree F.. Braided fuel hose with special hand feel, maximized resistance to heat, corrosion and abrasion.. Made of CPE Synthetic Material and Stainless Steel Wires, which is durable..

Size - ID 58 inch 16mm OD 0.94inch 24mm Length 10 feet. 300PSI Working Pressure 1800PSI Burst Pressure This 58 coolant hose is engineered to handle high-pressure fluid transfer safely, perfect for demanding automotive and industrial applications.. Extreme Temperature Resistance -40F to 302F Performs flawlessly in freezing winters and scorching summers, making this 58 hydraulic hose ideal for all climates.. Reinforced NBR Rubber CPE Outer Layer The 58 cooler hose features an inner polyester braid for strength and a durable CPE outer layer to resist abrasion, oil, and environmental damage.. Multi-Fluid Compatible Works with Oil, Gas, ATF More This 58 power steering hose safely transports transmission fluid, power steering fluid, hydraulic oil, and gasoline with no degradation.. Universal Fit for Cars, Trucks, ATVs Machinery This 58 transmission oil cooler hose is perfect for automotive repairs, industrial equipment, and off-road vehicles needing a reliable coolant or hydraulic hose.. 10 Heavy-Duty Clamps Included The 58 transmission cooler hose comes with premium stainless steel clamps for a secure, leak-proof connection every time..

ID 58 inch 15mm OD 0.86 inch 22mm Length 3M 10 FT. Maximum Working Pressure 150 psi Bursting Pressure 600 psi. Operating Temperature-22F to 248 F-30C to 120 C. DURABLE CONSTRUCTION - Made of NBR and braided polyester fiber, the 58 oil hose is oil and wear resistant, ensuring long-lasting performance in fuel system, fuel injection, and diesel applications.. WIDE APPLICATION - The 58 fuel hose is designed to handle a wide range of fuels, including ethanol, diesel, biodiesel, E10, E15, E85, and gasohol, making it suitable for various applications.. VEHICLE MANUAL CHECK - Always consult your vehicle's manual first to confirm fluid type, temperature, and pressure requirements before purchase.. FOR A LEAK-PROOF SEAL - Use of a clamp is highly recommended to prevent leakage and ensure optimal performance.Please be advised that this product does not include a clamp.

High quality The fuel hose is made of high quality NBR rubberNylon thread double woven fiber, The thickened inner core greatly increases the resistance of the hose to internal pressure, and has good flame retardancy and excellent corrosion resistance. Safe and durable, fine workmanship, not easy to break. Mainly used for fuel supply.. Features Fuel line nitrile rubber hose has excellent flexibility. NBR nylon wire double braided fiber will not bend as easily as this pipe. It has super bending ability. There is also a 58 inch diameter for better flow and fuel intake. Product size Inside diameter 0.63 16mm. Outer diameter 0.95 24 mm. The wall thickness is 4mm. Nitrile rubber tube transmission line can withstand -104F to 302F-40C to 120C, maximum working pressure 300 psi, rupture pressure 1200psi.. Easy installation 58 inch diameter hose can be cut to size according to your needs - 1 fuel line is 5m16ft long and can be cut to fit all your feet. Our NBR fuel line is also a great addition to conventional fuel lines, it is easy to install, easy to use hose barbs and fuel line clamps for your application.. Usage Fuel hose is designed for automotive or Marine engine fuel delivery, and can be widely compatible with gasoline, diesel, biodiesel, engine oil, hydraulic oil, lubricating oil, water and pump gas, used in cars, large trucks, motorcycles, buses, ships and so on. Our rubber fuel line hoses can be used in a variety of applications.. Package includes 1 16FT5M 58 inch ID Fuel hose . Here's our 90-day money-back risk-Free Purchase Guarantee View more product details..

Item List 1 pcs Fuel Line Hose,ID58,OD24mm,Length3ft. Function Mostly worked with coolant, fuel, diesel, oil, hydraulic fluid, pump gas, alcohol and air, pump, oil return, fuel return system, turbo cooler system and transmission system.. Material The fuel hose is made of NPR Rubber, which is durable and reliable,not easy to break or fade.. Installation Instructions Our engine fuel line is easy for you to use.. Please Notice Please allow 1-3mm differences due to manual measurement, thanks..

Specifications ID 5816mm OD 0.9424mm. Minimum Bend Radius 6.3160mm. Wall thickness 4mm.. Parameter Working Pressure 150psi. Burst Pressure 600psi. Temperature Range -40F to 257F.. Medium The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

Fuel Line Size ID 58 16mm, OD 1 25mm, Length 10FT.. Premium Material Fuel Line is made of premium NBR material, which has Oil resistance, heat resistance, flame resistance, high temperature resistance.. Working ConditionsNBR Fuel Hose Working Temperature Range -40F to 257F. Working Pressure 300PSI. Burst Pressure 1160PSI.. Applicable MediumNBR Fuel line can work with dieselbiodieselgasolineoilgreasewater and air, etc.Fuel Line can be widely used in oil pipelines for automotive internal combustion engines, mechanical equipment, etc.. Quality Commitment If you are not satisfied with your purchase, please get in touch with us, we provide 90-day money back.100 Satisfaction Guarantee for risk-free shopping.

Specifications ID 5816mm OD 0.9424mm. Minimum Bend Radius 6.3160mm. Wall thickness 4mm.. Parameter Working Pressure 150psi. Burst Pressure 600psi. Temperature Range -40F to 257F.. Medium The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

FUEL HOSE SIZE ID 58 INCH 16mm, OD 0.94 INCH 24mm, Length 10FT. With 10 Clamps.. HIGH-QUALITY CONSTRUCTION The 58 inch fuel hose is constructed from premium NBR material, ensuring exceptional oil resistance and durability. This makes it ideal for various applications, providing long-lasting performance in demanding environments.. TEMPERATURE PRESSURE RESISTANT Operating efficiently in temperatures from -40F to 257F, this 58 fuel line supports a working pressure of 150psi and a burst pressure of 600psi. Its perfect for high-performance needs.. WIDE APPLICATIONS This 58 inch fuel injection hose is suitable for a myriad of uses, including automotive fuel systems, PCV systems, and oil cooling. Whether you need a 58 coolant hose or a 58 power steering return hose, this product covers all bases.. OIL AND CHEMICAL RESISTANT This 58 push lock hose is engineered to be compatible with a wide range of fluids including gasoline, diesel, biodiesel, and oil. Its compatibility with various fluids makes it an excellent choice for 58 hydraulic hose and other automotive needs..

ID 58 16mm OD24 mm. Length 10 FT. Premium Construction - This heavy-duty 58 fuel hose features a 3-layer design with dual NBR tubes and braided polyester for superior strength and flexibility in demanding applications.. Fluid Compatibility - This 58 fuel line safely transports gasoline, diesel, E10E85, motor oil, and hydraulic fluid, serving as a universal 58 oil cooler hose and 58 transmission cooler hose.. Extreme Pressure - Rated for 150 PSI 600 PSI burst, this 58 hydraulic hose withstands fuel injection and high-pressure pump demands, making it a robust 58 power steering hose alternative.. Extreme Temperatures - With a -40F to 302F range, this 58 heater hose and 58 coolant hose replacement maintains flexibility in extreme engine bay heat and freezing cold starts.. Easy Installation - With a 72mm bend radius, this flexible 58 transmission hose and 58 fuel line is easy to route in tight engine compartments and around fuel pump modules.. For Fuel Fluid Lines - A direct-fit 58 fuel hose for supplyreturn lines, fuel pumps, and also suitable as a 58 hydraulic hose or 58 oil cooler hose for various engine bay applications..

Size ID 58 16.5 mm. OD24.5 mm. Length 10 FT. Min bending radius 73.5 mm.. Working Pressure 300 PSI. Burst Pressure 1800 PSI. Temperature range -40F to 302F-40C to 150C.. PREMIUM MATERIALThe 58 transmission cooler hose is made with synthetic NBR rubber, and features a 1-ply of flat braided polyester fiber reinforcement, thus preventing it from rusting and corrosion.. BETTER TRANSIMMISIONA perfect fuel line for vehicles with engines that need a large tube diameter. This 58 oil cooler hose ensures that the car engine can process the fuel in the best possible state.. BENDABLE The 58 fuel hose enables you to make sharp bends without kinking. It is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves.. WIDE APPLICATION The 58 fuel line hose is specially designed to be compatible with any fuel including methanol and nitromethane, oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide..

Size ID 58 inch 16mm OD 0.94 inch 24mm Length 20 feet.A minimum bend radius of 72mm and a sturdy wall thickness of 3.05mm ensures flexibility without compromising strength.. Material Inner Made with high-quality synthetic NBR rubber and reinforced with braided polyester fibers, this 58 coolant hose offers excellent resistance to fuel permeation. The durable outer layer of synthetic CPE rubber protects against aging and environmental damage, ensuring a long lifespan.. Parameter Built to endure tough conditions, this 58 transmission cooler hose has a maximum working pressure of 300psi and an impressive burst pressure of 1800psi. It performs reliably in extreme temperatures, ranging from -40F to 302F, making it suitable for demanding applications.. Fluid This 58 oil cooler hose is compatible with a wide range of fluids, including transmission fluid, oil, hydraulic fluids, lubricants, and gasoline, providing versatility for various automotive and industrial needs.. Application Engineered to create a secure and heat-resistant link between the oil cooler and the transmission, this 58 hydraulic hose significantly improves the efficiency of your vehicle's cooling system, ensuring optimal performance under pressure.. Versatility Perfect for applications such as a coolant hose, transmission cooler hose, hydraulic hose, or fuel hose, it effectively addresses diverse requirements in both automotive and industrial settings, delivering reliable performance in all scenarios..

Construction Silicone hose with 1-ply of Nylon Fiber Reinforcement. ID- .62 16MM OD 96 24MM. 300 PSI BURST PRESSURE. SUGGESTED 125 PSI.

The fuel line hose is for transfer petrol products.. Fuel line Hose Inner Diameter 15.9mm 58, Hose Outer Diameter 23mm 1516. Its total length is 304.8cm 10ft.. The Fuel Line Hose is made of Nitrile Rubber, which is better and durable for your car engine.. It is a universal product that fits most cars.. Package Include 1 x Fuel Line Hose.

HIGH-QUALITY FUEL LINE - The 58 heater hose is made of 3-layers. The inner and the outer pipe are made of NBR rubber and the middle reinforcing layer is braided with polyester woven. The Wall thickness is 3.5 mm. Oil resistant, cold-resistant, and ethanol tolerant.. HIGH PSI RATING - The 34 transmission hose has a pressure rating of 150 PSI Working Pressure, and holds up to a max of 600 PSI. The 34 fuel injection hose thrives across the temperature range of 22F to 248F. The 34 transmission cooler hose has good retardancy and excellent corrosion resistance.. FLEXIBILITY - The highlight of this 58 coolant hose is its sublime pliability. Steel, aluminum, or plastic lines will not bend as quickly as this tube. The superior bending ability of this fuel tube makes it easier to install. It also results in more fluidity in transmission.. WIDE APPLICATION - The premium rubber construction of this 10AN push lock hose enables it to be compatible with any fuel including methanol and nitromethane, oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. ALSO FIT E85.. DURABLE 304 STAINLESS STEEL CLAMPSThe 58 gas line hose clips are high quality and premium heavy-duty 304 stainless steel material that is more salt resistant, anti-rust, anti-corrosion, waterproof, oil proof than other 201 stainless steel. Solid and sturdy material ensures the adjustable hose clamps last a long time for use.. EASY TO INSTALL AND REUSABLE The 10AN fuel hose clamp is designed with a worm gear mechanism to adjust the clamps diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. These clamps also can be recycled and reused due to the 304 stainless steel material which makes them work last long. CUT THE SIZE AS YOU WANT - The 10AN fuel line is 10 Feet 3 m, and can be cut to size for all your applications. The length of the transmission hose makes it suitable for cross-platform use in engines. You can use it on both larger and smaller engines..

ID 58 16 mm OD 1 24mm. Minimum Bend Radius 2.8372mm. Wall thickness 4mm. Length 5 FT. Working Pressure 150 psi. Burst Pressure 600 psi. Temperature Range -40F to 302F.. PREMIUM MATERIAL - This 58 fuel line is made with high-quality rubber and reinforced with braided polyester, ensuring long-lasting durability, high-pressure resistance, and excellent oil and temperature tolerance for various automotive systems.. WIDE APPLICATION - Ideal for a range of systems, including fuel, coolant, oil, power steering, and transmission, this 58 inch hose serves as a reliable coolant hose, fuel injection hose, power steering return hose, and more, providing superior flexibility and performance.. HEAT OIL RESISTANT - Engineered to handle extreme conditions, this 58 inch high-temp fuel line is designed to resist heat, oil, and pressure fluctuations, making it perfect for use in fuel systems, oil coolers, power steering lines, and hydraulic applications.. EASY INSTALLATION - Featuring excellent flexibility, this 58 ID fuel hose is simple to install and can be cut to your desired length. It provides a secure, leak-proof fit, and works well in various configurations, including as a 58 power steering or transmission cooler hose.. SAE STANDARD - This 58 inch fuel line exceeds SAE 30R9 standards, ensuring it meets the rigorous requirements of modern engines. It is perfect for use in a variety of vehicles, including cars, trucks, motorcycles, and boats, with compatibility for both fuel and oil lines.. FLEXIBILITY - This 58 transmission cooler hose offers superior bendability with a minimum bend radius of 72 mm, making installation easier and enhancing fluid flow compared to rigid steel or plastic lines..

Good resistance to high temperatures for extended periods of time, which prolongs service life. Convenient 6-ft. lengths in self-service, reusable, recyclable package that can be displayed on pegboard. Meets SAE 20R3 Standard Wall Class D-2 requirements. Temperature Range -40 Deg. F to 257 Deg. F -40 Deg. C to 125 Deg. C. Caution Do not use for fuel or oil transfer applications. Inside diameter dimensions are .625 .625 inches.

Silicone heater hose can operate at temperatures ranging from -58F to 392F -50C to 200C and handle pressures up to 101 PSI. Ideal for engine inletoutlet systems and cooling applications.. Constructed with a thickened, reinforced design, this hose offers exceptional durability and flexibility. It is wear-resistant, ensuring a long service life even under harsh conditions. Perfect for applications requiring both strength and flexibility.. Suitable for various automotive uses, including water tubing, heating hoses, vacuum lines, and more.. Easy Installation Simple and straightforward installation process. Just prepare the appropriate size of silicone vacuum tube, remove the old hose, and install the new one.. Important Note Not Fuel or Oil Resistant While this hose excels in high-temperature and high-pressure environments, please note that it is not resistant to fuel or oil. Ensure proper use in compatible systems to avoid damage..

I.D. 58 or 15.9mm, odd. 3132 or 24.6mm, wt. C 25, max WP 50. Shields fire-alcohol fuel vent hose resists gasolinealcohol blended fuel and is Fire resistant. It features a weatherUV resistant NBRPVC cover. This hose primarily used for fuel vent lines gasoline up to 85 ethanol blended fuelsdiesel fuels. The temperature ranges from -20 Degree to 160 Degree. Meets USCG type A2 Requirements for pleasure boats. Meets Saej1527 type A2 ISO 7840 type A2 and NMMACE type accepted standards.

I.D. 58 or 15.9mm, o.D. 3132 or 24.6mm, wt. C 25, max WP 50. Shields fire-alcohol fuel vent hose resists gasolinealcohol blended fuel and is Fire resistant. It features a weatherUV resistant NBRPVC cover. This hose primarily used for fuel vent lines gasoline up to 85 ethanol blended fuelsdiesel fuels. The temperature ranges from -20 DegreeF to 160 DegreeF. Meets USCG type A2 Requirements for pleasure boats. Meets Saej1527 type A2 ISO 7840 type A2 and NMMACE type accepted standards.

Inside Diameter 58.. Excellent resistance to high temperature, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals.. Suitable use Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return.. NOT designed to handle continuous flow of alcohol fuel.. NOT for use where hose is submerged in fuel..

HEAVY DUTY PVC WITH BULIT-IN SPRING The jiggler siphon hose is made of high-quality and durable PVC materials, with exquisite craftsmanship and good assembly. The transparent tube makes jiggler hose easy to observe the state of liquid flow. The built-in spring prevents the tube from being bent and flattened and causing liquid blockage. PREMIUM COPPER NIPPLE WITH METAL BUCKLE The jiggler siphon hose is equipped with a pure lead-free copper nipple with industrial-strength glass balls and a metal buckle. The metal buckle can prevent the copper nipple from falling into the tank when you use the jiggle siphon. SELF-PRIMING SIPHON If you have ever needed to fill gas from your tank to your car, you know that its a hectic and messy process. With the siphon hose for gasoline you never have to deal with that again. What's more, its so much easier than lifting a 5 or 6 gallon gas can. MULTIFUNCTIONAL EMERGENCY ITEM This is an extremely helpful jiggler hose, easy to start and just fast enough to be effective. As an emergency item, the siphon will save your life and others along the highway when you see a person stranded for lack of fuel. Please keep one in every vehicle, and airplane. FUEL SIPHON PUMP TIPS Its known as a gasolinegaswater siphon pump,fuel transfer hose and emergency siphon. During the siphoning process, it is necessary to ensure that the liquid level at the suction end is always higher than the discharge end, otherwise the siphoning process will be terminated. Not recommended for drinking liquid transfer.

Specifications ID 389.5mm OD 2317mm. Minimum Bend Radius 3.9100mm. Wall thickness 3mm.. Parameter Working pressure 300 PSI. Burst pressure 1,200 PSI. Temperature range -40F to 257F.. Medium The NBR fuel hose is compatible with diesel, oil, gasoline, biodiesel, grease, and more.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel systems, oil cooling, and more..

Nitrile tube that is spiral reinforced for enhanced durability. NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments. Vacuum rating of 24 inHg for sizes less than 12 in I.D., and 10 inHg for sizes 12 in to 34 in I.D. at ambient temperatures. Warning Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose MPI for fuel injection applications. Intended for use with fuels where MTBE concentrations are no greater than 15 by volume.

Size ID 58inch 16mm,OD 0.94inch24mm.Material NBR.. Working Pressure 290psi. Burst Pressure 1160psi. Temperature Range -40F to 257F. Minimum Bend Radius 6.3inch160mm.. Applicable Medium 58 id fuel line can work with dieselbiodieselgasolineOilgreasewater and air,etc.. Application SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, PCV system, please check size and application pressure before purchase.. EVIL ENERGY provide this product 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..

VALUE PACK This pack includes 26pcs barb splicer mender hose fittings and 52pcs hose clamps316-6pcs,14 -6pcs,516-4pcs ,38 -4pcs,12 -4pcs,58-2pcs8-12mm hose clamp-20pcs,9-16mm hose clamp-20pcs,13-19mm hose clamp-12pcs.Sufficient quantity and various sizes can meet your daily pipe connection needs and enrich your inventory. PREMIUM MATERIAL Our brass barb splicer mender hose fittings are made of quality brass material, while the hose clamps are constructed from resilient stainless steel The reliable materials ensure the durability and longevity of our fittings and clamps, offering you a reliable tool that's built to last. FIRM CONNECTION Our brass barb splicer mender hose fittings, along with the included stainless steel hose clamps, create a secure, leakproof connection every time The robust design and the firm grip of our clamps ensure a no-worry connection that withstands the test of time. EASY TO CONNECT Both ends of the hose barb can be connected to a hose, which is a flexible joint used to connect two hoses with the same diameter. The size is in line with the standard, the connection with the hose is tight, the sealing is strong, and it is not easy to leak. WIDE APPLICATION Our brass barb splicer mender hose fittings are suitable for pipe repair, various hoses can be attached to these hose barb fittings, and they are applied to assist in transporting natural gas, oil, air, fuel, and water to meet your various needs.

Size 12an hose ID 58. OD 0.79inch.Length 20 feet6M. Please measure before purchase Includes as shown in the picture.. Working Pressure Working temperature range -76 to 446 -60 to 230. Max working pressure 1000psi. Bursting pressure 3000psi.. Applicable Medium Our PTFE fuel hose kits is suit for all automotive fuels, lubricants, and coolants.. Suitable for Widely Usage PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Notice PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Specifications ID 5816mm OD 0.9424mm. Minimum Bend Radius 6.3160mm. Wall thickness 4mm.. Parameter Working Pressure 150psi. Burst Pressure 600psi. Temperature Range -40F to 257F.. Medium The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

PROFESSIONAL-GRADE FUEL TRANSFER HOSE Durable 58 x 8 ft UL-listed hose designed for reliable fuel transfer with hand pumps and compatible 1005200 series units.. BUILT-IN SAFETY GROUND WIRE Internal stainless steel ground wire runs the full length of the hose to help dissipate static and improve safety during fueling.. ANTI-KINK SPRING GUARD Integrated 7-inch spring guard prevents kinks and hose collapse, ensuring smooth, uninterrupted fluid flow and longer hose life.. FUEL-RESISTANT ABRASION-TOUGH Nitrile inner tube resists corrosion from fuels while rugged neoprene outer cover stands up to wear, abrasion, and outdoor conditions.. UNIVERSAL NPT FITTINGS Equipped with 34 NPT threaded fittings for broad compatibility with fuel tanks and pump systems.. WIDE APPLICATION RANGE Ideal for gasoline, diesel, kerosene, petrol blends, and petroleum oils in agricultural, automotive, construction, and service shop applications..

Specifications ID 5816mm OD 0.9424mm. Minimum Bend Radius 6.3160mm. Wall thickness 4mm. Length 10ft.. Parameter Working Pressure 300psi. Burst Pressure 1200psi. Temperature Range -40F to 257F.. Medium The LokoCar NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The LokoCar fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The LokoCar fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

Specifications ID 5816mm OD 0.9424mm. Minimum Bend Radius 6.3160mm. Wall thickness 4mm. Length 5ft.. Parameter Working Pressure 300psi. Burst Pressure 1200psi. Temperature Range -40F to 257F.. Medium The LokoCar NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The LokoCar fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The LokoCar fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

Automotive Replacement Fuel HosesWe have five different inner diameters of fuel pipes,12inch,38 inch,516 inch,14 inch and 316 inch, which are used in various outdoor occasions to meet your daily needs.It is the necessary combination of machinery maintenance tools. Fuel Hoses Size316Inner diameter 4.8mm Outer diameter 11mm14Inner diameter 6mm Outer diameter 12mm 516Inner diameter 8mm Outer diameter 15mm38Inner diameter 10mm Outer diameter 17mm 12Inner diameter 13mm Outer diameter 20mm. Fuel Line MaterialFuel hose is made of NBR rubber with a braided layer of polyester thread in the middle and fuel line is divided into 3-layers inner pipe, outer pipe and intermediate reinforcing layer,which has the characteristics of oil resistance, wear resistance, aging resistance and high elasticity. Hose ClampsYou will recieve 20pcs spring hose clamp to fix fuel hose.Hose clamp made of high-quality 65Mn spring steel, it is enduring and has a long service life. Widely ApplicationIt can transport gasoline, engine oil,diesel oil for lawn mowers, motorcycle, car, boat, ATV,etc.

100 brand new, never been used.. Stainless Steel innter hose CPE synthetic rubberThe middle layer 304 stainless steel wire mesh sleeve The outer layer 304 stainless steel wire. Braided Nylon innter hose CPE synthetic rubberThe middle layer 304 stainless steel wire mesh sleeveThe outer layer High quality braided nylon. Operating temperature -40 Degree F to 350 Degree F. Application forracing fuel,pump gas,fuels with ethanol,alcohol based fuels,motor oilcoolant etc..

-10 AN, Length 2 feet. ID size 58, 15.9mm OD size 2932, 22.9mm. Material Made by High-Graded Nitrile Rubber NBR with Textile Reinforced, Covered by Elastomer. Works With Push-On Hose End Fittings, suit 400 510 series hose ends. For use with Fuel System, E85, E10, Oils, Ethanol, Lubricants and Coolant System. Operation Temperature Ranges from -40 C degree to 100 C degree. Working Pressure Rating 280 PSI, Burst Pressure is 800 PSI..

HIGH PRESSURE FUEL LINE features an nylon fiber braided outer cover and CPE synthetic rubber inner line. Maximum Working Pressure psi 500 psi. Bursting Pressurepsi 2000psi. Working Temperature Range -40 to 257-40 to 125.. The 10AN nylon braided fuel line kit includesFor cutting Fuel Line Splicing Tape,10pcs 10AN swivel hose ends,4pcs 10AN hose separator clamp and 58 braided fuel line 20 Ft.Hose Inner Diameter 0.56inch 14.29mm.Hose Outside Diameter0.82inch 20.83mm.. The nylon fuel line hose mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Not fit E85. This 58 fuel hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, etc.. Nylon fiber and stainless steel braid 10an cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use.Reference installation instruction included..

Cover resists heat, oil, ozone and weathering. Spiral reinforced construction. Tube has been upgraded to meet changes in fuel characteristics and resists heat and oil. Convenient 2-ft. lengths in self-service, reusable, recyclable package that can be displayed on pegboard. Meets requirements of SAE J30R7 and DIN 73379 except for tolerances.