BETTER KITS 26FT AN6 Fuel line 12pcs PTFE Hose End Fitting 4pcs Quick Disconnect Fitting 6pcs Hose Separator Clamp 2pcs 6AN Male Coupler 1pcs Standard Wrench 1pcs Way Reaming Tool.. SPECIFICATIONS Inner Diameter 38. Outside Diameter 0.465. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 3000psi. Bursting pressure 10000psi.. EFFECTIVELY PTFE fuel line can be compatible with all automotive fuelslubricantscoolant. Mostly used in EFI LS system and used as fuel injection hose, ls engine swap, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, vapor return line, etc.. MATERIAL The 6an fuel line kits made of more corrosion-resistant nylon Stainless Steel Braided PTFE Synthetic Rubber The fitting made of T6061 Aluminum. The material of union adapter is lightweight aluminum.. SERVICE 6AN PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended. If you have any questions, please contact with us, we are in 24 hours service.

Specifications ID 389.5mm OD 0.6716mm. Minimum Bend Radius 5128mm. Wall thickness 3.65mm.. Parameter Working pressure 300 PSI. Burst pressure 1,200 PSI. Temperature range -40F to 257F.. Medium The NBR fuel hose is compatible with diesel, oil, gasoline, biodiesel, grease, and more.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel systems, oil cooling, and more..

Specifications ID 389.5mm OD 0.6316mm. Minimum Bend Radius 3.9100mm. Wall thickness 3.2mm.. Parameter Working Pressure 300psi. Burst Pressure 1200psi. Temperature Range -40F to 257F.. Medium The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

Wide Range Of ApplicationsIt can be used for automotive fuel systems, suspension system wiring, lightweight modifications, cooling systems and more. ParametersOD 38 inch 9.52mm. Wall thickness 0.039 inch 1mm. Coiled length25ft 7.62 Meter. High Quality MaterialThis aluminum fuel line is extruded from lightweight 3003 grade aluminum alloy which emits great workability and corrosion resistance properties. High CompatibilityCompatible with fuel, oil, water, gasoline, diesel, ethanol, E85, etc. Complete AccessoriesThe kit comes with 4 Pcs of clamps for hard pipe, making it easy for you to secure the location when wiring.

Package 1 x 6AN 20FT Fuel Line Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Application 6AN braided fuel line hose kit, widely used for transmission oil cooler lines, fuel return lines, fuel supply lines, coolant hoses, fuel gauge lines, vacuum lines, turbo cooler lines, and oil feed lines. Feature 38 braided fuel line hose, constructed with silver nylon stainless steel braided outer cover and a chlorinated polyethylene CPE synthetic rubber inner liner. It is universally compatible with fluids such as fuel, lube, alcohol, ethanol, coolant, and air for automobiles or marine engines. Most suitable for racing cars motor racing bikes, but not applicable to E85. Material The 6AN hose is constructed from high-quality nylon and stainless steel braiding, has excellent flexibility and resistance to abrasion. Its 6AN fittings are constructed from durable aluminum alloy for long-term reliability. However, not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced. Outer nylon braided has excellent inflaming and safer to use. Work Scope Maximum Working Pressure 500psi, Bursting Pressure 2000psi. Working Temperature -40 to 350,Fuel Hose End SizeID 6 AN.

Parameter Maximum working pressure 500 PSI. Burst pressure 1,720 PSI. The temperature range -49F to 212F. The minimum bend radius 80 mm.. Specifications ID 38 inch 9.5 mm. OD 0.63 inch 16 mm. Length 10 ft.. Material The E85 fuel hose is made of double-layer NBR and is reinforced with a polyester fiber braid, providing excellent resistance to oil and wear.. Medium The high-pressure fuel hose is compatible with hydraulic oil, diesel, biodiesel, gasoline, oil, grease, E85, and more.. Application The push lock fuel hose meets EN854 implementation standards. The 38 fuel line is widely used in fuel systems, engine lubrication systems, hydraulic systems, oil pump inlet systems, engine oil filtration systems, and more..

High performance aluminum fuel hardline tubing. OD 38 inch 9.52mm. Wall thickness 0.035 inch 0.89mm. Coiled length25ft 7.62 Meter. This aluminum fuel line is extruded from lightweight 3003 grade aluminum alloy which emits great workability and corrosion resistance properties. Easy to cut, bend, flare and polish. 650 psi max working pressure rating makes this versatile for a variety of applications. Ideal for use in plumbing fuel systems, oil systems, water systems and air systems. Compatible with fuel, oil, water, gasoline, diesel, ethanol, E85, etc.. Use with tube nut couplers, sleeves and 37 flared AN fittings.

Size 6AN male flare to 38 inch, the thread size of the 6 AN is 916 UNF. Fits to 38 OD hardline, please measure before purchase.. Material Made of aluminium alloy fitting and brass ferrule.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. ApplicationThis 38 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.. NoteOnly applicable to stainless steel or aluminum hardline..

APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications.. WORKING ENVIRONMENT-Maximum Working Pressure725 psi5 mpa. Bursting Pressure2175psi15 mpa. Working Temperature Range-40 to 392-40 to 200.. SIZE- length20 feet. Inner diameter0.32 inches 8.13 mm. Outer diameter0.43 inches 10.92 mm.. MATERIAL- Inner layer PTFE Teflon rubber middle layer 304 stainless steel wire mesh sleeve outer layer braided nylon. PTFE fuel lines are more resistant to high temperature and pressure.. NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

Suitable for Widely Usage PTFE stainless steel braided fuel line kit is mostly used in EFI LS systems. It can be used as a fuel injection hose, LS engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carburetor fuel line, fuel return line, vapor return line, vacuum line, fuel supply line, turbocharger fuel line, and for other high-temperature and high-pressure applications.. Size ID 516 0.31 inch. OD 0.43. Please measure before purchase. Includes all components shown in the picture.. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,500 PSI. Bursting Pressure 4,500 PSI. The -6AN stainless steel braided high-pressure PTFE fuel line provides strong resistance to heat and extreme conditions.. Compatibility The PTFE fuel hose is compatible with all automotive fuels, lubricants, and coolants.. Notice The PTFE hose is relatively rigid and should not be bent or folded in half. Professional installation is highly recommended..

SizeID 38 10mm, OD 23 17mm, Length 10FT.. Working ConditionsNBR Fuel Hose Working Temperature Range -40F to 257F. Working Pressure 300PSI. Burst Pressure 1160PSI.. Premium MaterialMade of premium NBR materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.. Applicable MediumNBR Fuel line can work with dieselbiodieselgasolineoilgreasewater and air, etc.. Wide ApplicationNBR Fuel Line Hose widely used in the fuel system, steam emission, oil cooling, please check the pressure of application before purchase..

Material components 6AN Fuel Line is made of CPE synthetic rubberInner, Stainless Steel Wire MeshIntermediate and Nylon BraidedOuter.. Product Parameter Length 10 FT ID 0.348.8mm OD 0.5514mm.Temperature range -104 to 248 -40 to 120. Max working pressure 500PSI. Bursting pressure 2000PSI.. Widely Usage 6AN Fuel Line is widely used for transmission oil cooler line, vapor return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line, etc.. Attention The material of CPE is hard, it cannot be bent or folded excessively.Minimum bend radius 63.5mm.. Good Service If you have any problems, please feel free to contact us..

OURU Fuel Line Hose ClampOur 20pcs gas line clamps with adjustable screws,features flexible adjustability,freely adjustable size range is 916-58 14-16mm. The size standard has no deviation,which can meet your daily needs for products of different sizes. 304 Stainless Steel MaterialThe mini heavy duty hose clamps are made of high quality 304 stainless steelIncludes screws and nuts.They have excellent rust resistance and outstanding oxidation resistance,ensure long-lasting use for outdoor. Will Not BreakSturdy Steel Straps ensures no breakage during tightening.The surface of mini fuel hose clamp is smooth and burr-free,which can prevent the clamp from cutting off the hose. Leak-proof DesignThis fuel hose clamp has 360 sealing construction can effectively solve the problem of air or liquid leakage from the hose and no need to worry about deforming or stripping out after tightening.Easy to use,just need use a screwdriver to adjust the size. Widely Used This small high pressure hose clamps fit for air hose, water pipe,fuel hose,silicone hose,etc.Widely used in diesel petrol pipe, home use,auto repair,marine,plumbing,agriculture,industrial and so on.

High-Performance Braided HoseConstructed with a CPE rubber inner core, reinforced by a 304 stainless steel wire layer, and finished with a nylon outer braid. Engineered for extreme durability with a working temperature range of -40F to 350F, maximum working pressure of 500 PSI, and burst pressure of 2000 PSI. Precision Push-Lock Hose EndsIncludes 10 black anodized aluminum fittings 4 straight, 2x 45, 2x 90, 2x 180. Designed specifically for push-on-lock installationno special tools required for a secure, leak-free seal. Note Not compatible with twist-lock fittings.. Versatile Fluid CompatibilityIdeal for a wide range of automotive applications including transmission cooler lines, oil feedreturn lines, coolant hoses, vacuum lines, and turbo lines. Compatible with transmission fluid, engine oil, hydraulic fluid, diesel, and race fuels. All-in-One 20FT KitComes with 20 feet of 6AN braided hose 0.34 ID, 0.55 OD. This complete kit provides ample length and the necessary fittings to handle most custom routing projects without needing to buy extra components. 247 Customer SupportmaXpeedingrods provides lifetime technical support and a 1-year limited warranty for quality-related issues from the purchase date. Our customer service team is always ready to assist you..

High performance aluminum fuel hardline tubing. OD 38 inch 9.52mm. Wall thickness 0.035 inch 0.89mm. Coiled length10ft 3 Meter. This aluminum fuel line is extruded from lightweight 3003 grade aluminum alloy which emits great workability and corrosion resistance properties. Easy to cut, bend, flare and polish. 650 psi max working pressure rating makes this versatile for a variety of applications. Ideal for use in plumbing fuel systems, oil systems, water systems and air systems. Compatible with fuel, oil, water, gasoline, diesel, ethanol, E85, etc.. Use with tube nut couplers, sleeves and 37 flared AN fittings.

Premium Material Made of premium NBR materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection. Working Conditions NBR Fuel Hose Working Temperature Range -40F to 257F. Working Pressure 300PSI. Burst Pressure 1160PSI. Product Size ID 38 10mm, OD 23 17mm, Length 10FT. Wide Application NBR Fuel Line Hose widely used in the fuel system, steam emission, oil cooling, please check the pressure of application before purchase. Applicable Medium NBR Fuel line can work with dieselbiodieselgasolineoilgreasewater and air, etc.

16 Feet of 38 Fuel Tubing in Stainless Steel grade 304, Made in USA. 38 Inch O.D. Tubing.

Precision Manufacturing you will receive 2 stainless steel tubing coils, each is approximately 25 ft 7.62 M, with a dimension of 38 inch 0.95 cm in outer diameter, and an approximate thickness of 0.06 cm The products are created in the metric system with tolerances. Tailored Needs Fulfilled you will receive 2 pieces of stainless steel coils that can be perfectly tailored to your usage If needed, they can be cut precisely according to your project's specific requirements, giving you the flexibility to achieve optimal outcomes. Durable Construction they are crafted from quality 304 stainless steel, which is renowned for its excellent corrosion resistance in both high and low temperature environments, offering a long standing service usage to support your projects continuously. Versatile Use the 304 stainless steel tubing is multi functional and can be applied both as fuel line coil and wort cooler, making it a handy solution for industry, agriculture, and automobile applications Use it with ease knowing its robust characteristics make it ready for your projects. Ideal for Heavy Duty Applications due to its high durability and resilience, stainless steel proves to be a quality material for plumbing or automotive applications The tubing's inherent toughness and robustness make it the suitable solution for handling demanding tasks.

Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications, etc. NOT FIT E85.. Universal ApplicationThe fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Inner hose CPE synthetic rubber, Outer layer stainless steel braided.Hose Length 3.6m12ft, Color Silver. Hose End Size AN-6, Inner Diameter 0.34 8.7mm, Outer Diameter 0.55 13.9mm.. Working Temperature -100 to 500 -73C to 260C ,Working pressure 1000 PSI, Burst pressure 3000 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. AdvantageDesigned for smooth flow, the hose end fittings are made of high-quality aluminum alloy material for strong strength, Polished and anodized surface provide the bright appearance and corrosion protection.. NOTENot Legal in the state of California New York, Not complies with C.A.R.B. regulations, Not for sale in the states of CA and NY..

Stainless steel braided fuel line can be worked with transmission fluid, coolant, oil, race gas, pump gas, vacuum, hydraulic fluid, diesel and fuel, NOT FIT E85.. Universal ApplicationThe fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Inner hose CPE synthetic rubber. Outer layer stainless steel braided Length 6.1m 20Ft, Color Silver, Inner Diameter 8.7 mm 0.34, Outside Diameter 13.9 mm 0.55.. Working Temperature -100 to 500 -73C to 260C ,Working pressure 1000 PSI, Burst pressure 3000 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. Package Include20FT 6AN Stainless Steel Braided Fuel Line Hose x 1Pc. No instruction or direction included in the package, Professional installation is highly recommended.. NOTENot Legal in the state of California New York, Not complies with C.A.R.B. regulations, Not for sale in the states of CA and NY..

Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications, etc. NOT FIT E85.. Universal ApplicationThe fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Inner hose CPE synthetic rubber Outer layer stainless steel wire braided. Premium nylon fiber and stainless steel wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.. Length 10FT, Working Temperature -100 to 500 -73C to 260C ,Working pressure 1000 PSI, Burst pressure 3000 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. NOTE Not Legal in the state of California New York, Not complies with C.A.R.B. regulations, Not for sale in the states of CA and NY..

1. SAE 30R7 Fuel Line - 38 ID High-Pressure NBR Hose25FT length, 300 PSI working pressure, 1160 PSI burst pressure. Oil-resistant NBR construction for gasoline, diesel, biodiesel, and engine oil systems.. 2. Wide Temperature Range Fuel Hose -40F to 257FWithstands extreme cold and heat conditions. Flexible design prevents kinking, suitable for automotive fuel systems and fluid transfer applications.. 3. Multi-Purpose Fuel Line for Automotive Marine UseCompatible with cars, trucks, buses, boats, and motorcycles. Transports gasoline, diesel, biodiesel, oil, hydraulic fluids, water, and air safely.. 4. Lightweight Portable Fuel Transfer HoseHigh-quality NBR material provides secure connections while remaining lightweight. Easy to handle and install in various vehicle fuel systems.. 5. Professional-Grade Fuel Hose with Wide ApplicationSAE 30R7 certified for automotive fuel systems, engine oil lines, and fluid transfer. Check your system's pressure requirements before installation for optimal performance..

Feature Easy to bend, unroll, cut, form, straighten, flexible and install. Stable quality.. Usage Gas regulator relief vent line, truck, 39 Chevy, 1950 Chevy on the frame rail, hot rod, 67 F100, 79 F350, 84 F250, 1965 C10 pickup, Holley EFI system, gas tank vent, high pressure line on ac system in 02 Volvo s60, a fuel line frome tank to pump, air ride line, transmission cooler lines and so on.. Diameter 38 Inch Length 25-Feet Wall Thickness 0.035-inch.

Package Includes 6an fuel line 20 FT 1 6AN Swivel Hose End Fittings 10 Hose Separator Clamp 4 6AN Male to Male Flare Coupler Union Fitting Adapter 2 6AN Male to AN4 Male Flare Reducer Coupler Union Fitting Adapter 2 Male Flare Plug with Hex head 1 6AN Male Flare to 14 NPT Fitting Adapter 4. Working Parameter 6an braided fuel line kit, Hose ID 0.33 inches Hose OD 0.57 inches Working temperature range -100 to 500 -73 to 260 Maximum working pressure 500 psi Burst pressure 2000 psi. High-Quality Materials The 6an fuel hose has an all black nylon fiber woven sheath and a CPE rubber lining The fuel hose has good flame retardancy and excellent corrosion resistance. Application The 6AN nylon braided oil hose kit is widely used as transmission oil cooler line, fuel return line, fuel supply line,etc. Can compatible with transmission fluid,engine oil, race gas,vacuum, hydraulic oil,diesel,and fuel Not suitable for E85. Support Professional installation is highly preferred Recommend to install with our AN Wrench If you have any questions and needs, please find our 24-hour Customer Service Team via Amazon.

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy.. Maximum Working Pressure 750psi. Bursting Pressure 2250psi. Temperature Range -22F to 248F.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp and 6an braided fuel line Length 20 Feet. Hose ID 0.31. Hose OD 0.56inch.. The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

6AN Brand New Braided Stainless Steel Oil Gas Fuel Hose with Special Hand Feel. Application forracing fuel, pump gas, fuels with ethanol, alcohol based fuels, motor oil coolant etc, but not applicable to E85.. 6AN 38 Stainless Steel Braided Fuel hose, Made of CPE synthetic rubber and stainless steel braided, Length25 FT Outside Diameter 0.55 14mm Inner Diameter 0.34 9mm. Working Temperature -40 to 248 Working Pressure 1000PSI Burst Pressure 6000 PSI. Braided fuel hose with special hand feel, maximized resistance to heat, corrosion and abrasion.. Not Legal in the state of California New York, Not complies with C.A.R.B. regulations.

Fits 38 Fuel Line - 38 Fitting Or Connector At Each End.. Constructed from High-Quality Materials for Long-Term Durability Made from premium materials, this fuel filter is built to withstand harsh conditions and prolonged use. Its robust construction ensures that it remains effective over time, providing reliable filtration and performance.. GenericUniversal Fuel Filter Can Be Used For Tractors,Cars, Trucks, Motorcycles, Rv'S And Any Gas Powered Engine... The fuel filter is easy to use, and the transparent shell is convenient to observe whether the filter paper needs to be replaced or not, and whether the gas passes through the filter. Please replace the fuel filter regularly. The kit contains 2pcs in-line fuel filter.

Include a universal 12Ft fuel hose and 6 x swivel hose ends 2 x AN-10 to AN-6 Fuel Tank Fitting Adapters. The included swivel hose ends are rotary for convenient operation Fitting Type Straight, 45 Degree, 90 Degree. CNC machined items, based on premium stainless steel T6061 alloy aluminum materials. With anodized surface, it is hard and solid Working Temperature -40 to 350 Working Pressure 1500 PSI. Not Legal in the state of California New York, Not complies with C.A.R.B. regulations.

Cable clamp screw hole diameter 6.5mm, fit for 6mm 14 inch screw bolt to through them. Cable clamp inside diameter 38 inch. Fit for 38 inch outside diameter wiring, lines,hoses or cables to a panel or frame application.. The Eastwood 38 Inch Fuel Line Mounting Hardware Kit Will Allow You To Complete Your Brake Line Project With Perfect Professional Results.. High Quality Stainless Steel Construction, Epdm Rubber Insulation. Universal Application To Mount 38 Inch Tubing. These Mounting Clips Are Made From High Quality Stainless Steel So You Can Be Assured That They Will Not Rust Or Corrode.

25 Feet 38 Nylon Fuel Line Tubing. Made of high quality nylon plastic, heat resistant, corrosion resistant. There are no installation instructions, it is recommended to install it professionally.

Widely Universal Ideal for use in plumbing, fuel, oil, water, and air systems compatible with fuel, oil, water, gasoline, diesel, ethanol, E85, and other similar fuels.. High Quality MaterialsMuHize aluminum fuel line is extruded from lightweight 1006 grade aluminum alloy which emits great workability and corrosion resistance properties. Easy to cut, bend, flare and polish. Easy to UseMuHize aluminum tubing is easy to bend and cut using simple tools, which is easy to work with and long-lasting, making it a great fuel line replacement option for professionals and do-it-yourselfers. 14213 PSI MuHize 38 aluminum tubing has a maximum working pressure rating of 14213 psi and can withstand pressure fluctuations in high-pressure fuel systems, providing reliable fuel delivery in both high-performance race cars and daily-use passenger vehicles.. Package Include38 OD9.99mm,Length 25 Feet 7.61m, Wall thickness 0.030 inch 2.84mm.

Clamp Type Double Line Clamp, 38 inch.. Features Ideal for brakes and fuel lines.. Suitable for Perfect for fuel, air, electrical, brake, pipeline.. Easy to use Come with mounting screws, fast and convenient to tighten the screws with a wrench.. Material Made of 304 stainless steel, strong and durable, have superior rust resistance and the excellent of oxidation resistance..

Size Inner Diameter 38 9.5 mm Outer Diameter 16 mm Length 1 Ft. Compliant with SAE 30R10 Standard Specifically designed for fuel delivery within the fuel tank, supporting In-Tank installation. Compatible with E85E10gasolinediesel Utilizing an ethanol-resistant fluorine rubber inner layer, it is suitable for mainstream fuels such as E85, E10, gasoline, and diesel. Wide Application Widely used as in-tank fuel pump hose, transmission cooler hose, fuel injection hose and compatible with 30R730R9 applications. Construction Industrial-grade three-layer structure design, with a 300 PSI pressure-bearing capacity.

Product Size Parameter OD 38 9.5 mm, ID 0.32 8.1 mm. Wall thickness 0.025 0.7 mm. Length 25 ft 7.62 m. Maximum working pressure 500 PSI. Burst pressure 1400 PSI. Temperature range -58F to 240F.. Material Features The aluminum fuel line is manufactured from 1060 grade aluminum. The seamless aluminum hard line is lightweight, flexible, corrosion resistant, and thermally conductive. It meets the specifications of ASTM B210.. Application The aluminum fuel tubing is ideal for transmission oil, diesel, gasoline, gas, E85, water, air, and more. It is widely used as an automotive AC line, metal fuel line, transmission line, fuel return tube, and air compressor tubing.. Installation With the included tools and accessories, the metal fuel line is easy to bend or shape according to needs, allowing you to complete replacement or assembly steps independently and effortlessly.. Packing List The Evil Energy aluminum tube kit contains 38 OD aluminum tube 25 FT, 1 tube cutter, 1 tube bender, 1 deburring tool, 4 38 tube clamps, and 6 6AN female to 38 compression fittings..

APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications.. WORKING ENVIRONMENT-Maximum Working Pressure725 psi5 mpa. Bursting Pressure2175psi15 mpa. Working Temperature Range-40 to 392-40 to 200.. SIZE- length10 feet. Inner diameter0.32 inches 8.13 mm. Outer diameter0.43 inches 10.92 mm.. MATERIAL- Inner layer PTFE Teflon rubber middle layer 304 stainless steel wire mesh sleeve outer layer braided nylon. PTFE fuel lines are more resistant to high temperature and pressure.. NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

Widely UniversalThe MuHize fuel lines repair kit contains the most common fuel line repair parts and is designed for most cars. Fuel lines can work with diesel, biodiesel, gasoline, oil, grease, water, and air. Excellent SealingThe MuHize 38 fuel line kit can restore the integrity of the fuel system for proper fuel flow, minimizing risks such as accidents or fuel leaks. Easy to Install MuHize 38 fuel line repair kit includes a variety of matching connectors and accessories, making the installation process quick and easy. Please remember to use proper caution when installing the nylon tube on fittings, and avoid high heat areas such as exhausts and exhaust manifolds. High Quality MaterialsMuHize 38 nylon fuel line repair kit is made from high-quality nylon plastic, heat-resistant, corrosion-resistant, not prone to breaking or deforming, and can extend its useful life. Package Include290 Degree 38 Quick Disconnect 2Straight 38' Quick Disconnectqty 238 Nylon To Steel Compression Unionqty 2Gm 38 To Nylon Or Rubberqty 238 Quick Disconnect To Steel To Nylonqty 238 Quick Disconnect To Steel To Nylonqty 10Nylon Fuel Line Clamps 125 Feet 38 Nylon Fuel Line Tubing.

EFFICIENT FUEL DELIVERY - Mupera 3 8 fuel line repair kit is designed to withstand high pressure and efficiently deliver fuel from the tank to the engine. The corrosion and aging resistance of this material provides consistent fuel delivery to your vehicle. Outer diameter 9.52mm, Inner diameter 6.5mm.. EXACT FIT - This nylon fuel line repair kit is compatible with 38 nylon fuel line and includes a variety of quick disconnects and compression fittings. The fuel line kit included packing slip ensures a perfect fit for your vehicle and easy installation.. PREMIUM FUEL LINE - The Mupera 38 nylon fuel line is constructed of premium nylon material for superior corrosion, abrasion, and heat resistance.The nylon fuel line ensures long-lasting protection for your vehicle.. PREVENT LEAKS - The Mupera plastic fuel line repair kit and fittings provide an excellent seal to prevent any fuel leaks during delivery, 38 nylon fuel line ensuring safe and reliable fuel delivery to your vehicle.. EASY INSTALLATION - Mupera 38 nylon fuel line include a variety of matching fittings and accessories to make installation quick and easy. Nylon fuel line repair kit 38 replacement and repair is easy even for non-experts..

Size MuRealy 38 aluminum fuel line OD 38 9.5mm, 38 od hard fuel Length 10FT, brake line coil 38 Wall Thickness 0.063 1.6mm, well protected during shipping. Note Please confirm the steel fuel line size you need before purchasing to avoid inconvenience caused by size issues. 38 fuel line steel manual measurement may have errors.. Material Extruded from lightweight 1060 grade aluminum alloy, fuel line 38 has excellent working performance and corrosion resistance. 38 aluminum brake line maximum working pressure 650 psi.. Easy to bend The MuRealy fuel pipe is easy to bend, unfold 38 aluminum fuel line not easy to break when unfolded, cut, form, straighten, flare and polish. 38 steel tubing has good ductility and 38 brake line can be easily straightened and aluminum tube bent into a larger radius by hand.. High Compatibility MuRealy 38 fuel line compatible with fuel, engine oil, water, gasoline, diesel, ethanol, E85, etc.. Wide Application MuRealy 38 aluminum tubing for hydraulic brake system, fuel system and engine aluminum hard fuel line for hydraulic brake system, fuel system and transmission system, 38 Metal fuel lines, transmission cooler lines, etc. Aluminum tubing can be used for automotive fuel systems, suspension system wiring, lightweight modifications, cooling systems, etc..

Zinc Plated Steel for Corrosion Resistance. .187, .25, .312 and .375 Inch.

The brake line fits most braking systems, fuel systems, transmission systems of your car, etc.. The brake line is made of metal, The tubing is made from unique rust corrosion proofing technology, plated with zinc. Suits the brake system.. Made of material of metal, durable for the car, easy bending and flaring, no tools necessary.. The tube's total length is 25ft and its outer diameter is 38.. Package Include 1 x Brake Line.

The brake line fits most braking systems, fuel systems, transmission systems of your car, etc.. The brake line is made of metal, The tubing is made from unique rust corrosion proofing technology, plated with copper. Suits the brake system.. Made of material of metal, durable for the car, easy bending and flaring, no tools necessary.. The tube's total length is 25ft and its outer diameter is 38.. Package Include 1 x Brake Line.

Size ID 38 10mm, OD 58 inch 16mm, AN6 Fuel Hose, Length 10FT. Material This small engine fuel line is made of high-quality NBR, which is oil resistant. Working Pressure 0.6Mpa, Burst Pressure 1.8Mpa, Temperature Range -40F to 248F. Application Designed for conveying gasoline, diesel, biodiesel fuel, engine oil or water in car, truck, bus, automotive, etc. Please check the pressure of application before purchase. How To Use Use hose barbs and fuel line clamps to install.

Heavy Duty The bottom of housing is welded to increase breaking torque by 60. The non-perforated band prevents deforming and stripping if over-torque. Our hose clamps provide superior clamping force and safe sealing.. SAE Standard Designed by German, meets SAE J 1508 standards. All 516screw hex head for nut driver fast installation Failure Torque 60 lb-in, installation Torque 35 lb-in.. Protect Your Hoses The roll-up band edge and embossed band design prevent hoses from cutting and extruding through the notches.. All 304 Stainless Steel The screw, band and buckle housing are made of 304 SS. To keep smooth worm drive, the screw should be plated with a thin layer of zinc to prevent metal grinding or micro welding when clamp is torqued at high speed.. Applications Our worm clamps are popular general purpose for garden sprinkler, drip irrigation water line clamping and engineered to prevent hose damage so perfect for auto fuel line and gas line..

Gas line replacement.

Zinc Plated for Corrosion Resistance. Great for making long lines without unions.

Comes with four 16 foot stainless steel pieces. One of each size 316 Inch, 14 Inch, 516 Inch 38 Inch. Made in the USA. Great for brake and fuel lines. Protects exposed tubing from rocks debris.

Seamless repair - this replacement fuel line allows you to only replace the damaged section of line with a piece that matches the original. Ensure fit - measure the outside diameter of the original fuel line on the vehicle to ensure proper match. Corrosion resistant - materials are constructed to resist damage from the elements. Companion part - installation is simpler when also using a fuel repair line kit that comes with connectors and related tools. Backed by team of engineers and quality control specialists in the United States.

Stainless Steel Tubing. Tubing will never rust. 16 feet of tubing. Pack of 4 - 38 SAE Steel Fittings.

High-Quality 304 Stainless Steel Made from solid, polished 304 stainless steel for long-lasting durability, corrosion resistance, and reliable performance in gas, fuel, and water lines. Compact Space-Saving Design Small profile fits tight spaces easily. Barbed ends securely hold PVC, rubber, or vinyl tubing, with smooth quarter-turn operation for effortless flow control. Leak-Proof Double Seal Features a double-seal system with PTFE seals to prevent leaks, ensuring safe and secure control of liquids and gases. High Temperature Pressure Resistance Withstands temperatures from 5F to 302F and pressures up to 913 psi, making it ideal for water heaters, fuel lines, and other demanding applications. 2 Pack Value Kit with Clamps Includes 2 hose barb ball valves and 4 stainless steel hose clamps 2 per valve for quick installation in irrigation systems, heater hoses, fuel lines, aquariums, and home plumbing projects.

Braided stainless steel fuel hose features a stainless steel braided outer cover and a Chlorinated Polyethylene CPE synthetic rubber inner line.. This AN6 stainless steel braided hose can usually be used with coolant, diesel, engine oil, hydraulic oil, pump air, air and fuel.. AN6 stainless steel braided hose can be used in vehicle and motorcycle transmission cooler system, pump, system and fuel system, such as fuel pump, fuel filter, fuel tank, oil filter, oil sandwich adapter, oil return, and etc.. The outer braided layer is made of stainless steel, which is waterproof, rust resistant, abrasion resistant, and very durable.. Package Included 1 x 3.3ft 38 Braided Fuel Line.

Precise Dimensions for Versatile Use 9.5mm38 OD, 1mm125 Wall Thickness,305mm12 Length, Pack of 4. This exact sizing is perfect for custom fabrication, framing, railing construction, and DIY projects in home improvement, garden decor, and furniture making.. Premium 304 Stainless Steel Tubing Crafted from high-grade 304 stainless steel, this tubing boasts exceptional strength, corrosion resistance, and weldability, making it ideal for demanding industrial, automotive, and marine applications. The polished surface finish not only enhances aesthetic appeal but also ensures long-term durability against rust and wear.. Professional-Grade Performance The seamless construction and polished treatment allow for easy threading, welding, or cutting with standard tools, ensuring a smooth finish and secure fit. Whether used in food processing equipment, medical devices, or chemical apparatus, it meets stringent hygiene and safety standards.. Multi-Industry Application Ideal for a wide range of sectors including industrial machinery, automotive parts, marine components, chemical processing, agriculture, and construction. It can be utilized to build frames, railings, shop fittings, handicrafts, garden products, and more, offering reliable performance in both indoor and outdoor environments.. Value-Packed Ready to Use Get 4 high-quality tubes in one pack, eliminating the need for multiple purchases. With its durable material and precise specifications, this tubing is a cost-effective solution for both professional contractors and DIY enthusiasts, ensuring long-term use and minimal maintenance..

Fuel Line Size ID 38 10mm, OD 1116 17mm, Length 10FT.. Premium Material Fuel Line is made of premium NBR material, which has Oil resistance, heat resistance, flame resistance, high temperature resistance.. Working ConditionsNBR Fuel Hose Working Temperature Range -40F to 257F. Working Pressure 300PSI. Burst Pressure 1160PSI.. Applicable MediumNBR Fuel line can work with dieselbiodieselgasolineoilgreasewater and air, etc.Fuel Line can be widely used in oil pipelines for automotive internal combustion engines, mechanical equipment, etc.. Quality Commitment If you are not satisfied with your purchase, please get in touch with us, we provide 90-day money back.100 Satisfaction Guarantee for risk-free shopping.

WHAT YOU GET 38 x 25 Ft Stainless Steel Tubing Coil. MATERIAL Stainless steel is a reliable material that is easy to maintain and install due to its corrosion-resistant properties.. BENEFIT Stainless steel tubings are very strong so that it can be bent without breaking or cracking. EASY TO MAINTAIN Just wipe it with a cloth to keep it looking its best.. APPLICATIONS Stainless steel is a strong, tough material that makes it an ideal choice for plumbing or automotive applications.

Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line. Braided Steel Fuel Line Maximum Working Pressure psi 1000 psi. Bursting Pressurepsi 6000 psi. Working Temperature Range -40 to 257 -40 to 125 . Please make sure the pressure and temperature range is suitable for your application before purchase. Include a universal 3 FT fuel hose and 2 pcs swivel hose ends Inner Diameter 38 10.5 mm - Outer Diameter 58 17.5 mm. Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur. Professional installation is highly recommended. Please be careful of burrs at the inlet and outlet.

Universal Fuel Line - 38 10mmHose with 6ft long line. Hose inner diameter 38 10mm, outer diameter 58 16mm.. Compatible with ethanol blended fuels, Engineered low permeation material prevents fuel evaporation, Suitable for Boats, RVs, Tractors, and Caravans.. Dual check valves allow priming in multiple orientations without restricting fuel flow.. Premium quality rubber bulb with rubber line hose, Stainless steel clamps.. Note This is rubber product, please do not store this item under direct sunlight, high temperature or other rough environment..

Available in many different styles, including elbows, union, and tees. A large variety of tube diameters and pipe sizes available. Conveniently packaged in diverse piece counts to assist with both small and large projects. Also suitable for a broad range of industrial and commercial uses. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Direct replacement - these fuel line connectors fit and function like the vehicle's original equipment connectors for reliable, leak-free performance. Quality construction - manufactured from premium materials for a long service life. Saves money - replace only the part, not the entire assembly. Excellent value - original equipment quality at a lower price. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

General CompatibilityThis 38-inch nylon fuel pipe is suitable for the fuel injection system of General Motors vehicles. It is commonly used for standard automotive fuel in most passenger cars and light trucks. It is not recommended for use with diesel. Before purchase, please check the fuel system pressure specifications of the vehicle and the inner diameter size of the applicable fuel pipe.. Size SpecificationsLength of this fuel pipe 10 feet, Outer diameter 38 inch 0.375 inch, Inner diameter 516 inch 0.3125 inch. Rated working pressure 95 PSI. High-Quality MaterialsThis fuel hose is made of high-quality nylon material, which is corrosion-resistant and heat-resistant. It has good flexibility, making it convenient for line connection and assembly, thus facilitating long-term durability.. High Temperature ResistanceNylon fuel pipes are usually designed to withstand the standard engine compartment temperature. Under normal driving conditions, the engine compartment temperature is typically between 0C and 100C 32F to 212F.. CautionWhen cutting Rotate the pipe cutter slowly to cut the pipe to avoid flattening Connectors Use a hot air gun or hot water to gently heat the pipe to make it soft, facilitating installation Bending After heating, perform the bending operation slowly and evenly immediately, do not make sharp turns..

Premium Stainless Steel Construction Made from high-quality stainless steel, these mini hose clamps offer superior rust and oxidation resistance for long-lasting durability in both indoor and outdoor environments, featuring smooth burr-free surfaces that won't damage hoses.. Precision 916-58 14-16mm Fuel Line Clamps This 20-piece set of 38 mini fuel injection gas line hose clamps is specially designed for 916-58 diameter hoses, providing perfect fitment for various fuel lines and small tubing applications with exact sizing and no deviation.. Industrial-Grade Leak Protection Engineered with 360 sealing construction and reinforced steel straps, the fuel line hose clamps create airtight seals to prevent liquidair leakage, resisting deformation even under high pressure for reliable performance in automotive.. Tool-Friendly Adjustable Design Featuring easy-turn screws compatible with standard screwdrivers and socket wrenches, these fuel line hose clamps offer flexible size adjustment for quick installationremoval while accommodating various hose diameters with secure fastening.. Multi-Industry Heavy-Duty Application Perfect for demanding uses across automotive fuel systems, marine plumbing, agricultural equipment, and industrial machinery, the outperform standard models for silicone hoses, water, and air lines..

Protects .375 Tube. Made in 304 Stainless Steel. This Spring Guard or Gravel Guard protects exposed areas of the tubing from rock or stone chips. 8 Foot piece.

38 Outer Diameter. Zinc Coated Steel. Gas line replacement.

Premium Material Made of high-quality NBR, the fuel line is oil-resistant and heat-resistant. In addition, the three-layer structure of fuel line hose makes it more pressure-resistant and stronger.. Ingenious Design The middle layer of fuel line kit is braided with polyester fibers, which could increase the resistance to pressure and prolong the service life. Matching fuel line clamps can facilitate the installation and improve efficiency.. Product Information Length 10 FT ID 38 inch10mm OD 0.67 inch17mm. Working pressure 300PSI Burst pressure 1160PSI Temperature range -40 Fahrenheit degree to 250 Fahrenheit degree.. Wide Applications The fuel line hose can be widely used in conveying gasoline, diesel, biodiesel and so on. The NBR rubber gasoline tube is suitable for tractors, lawn mowers, motorcycles..... Good Service If you have any problems, please feel free to contact us..

Material 3003-Grade Aluminum Coiled Tubing Fuel Line Tube, 38 Inch, Diameter 25-Feet Roll.035-inch Wall Thickness.. Compatibility Vehicles requiring larger tube diameter. Measurement 38-inch Diameter, 25-feet Roll, .035-inch Wall Thickness. Maximized Fuel Flow Aids in better fuel intake and flow. Package Inclusions 1 x 38 Diameter 25' Aluminum Coiled Tubing Fuel Line.

Size38 OD9.525mm,Length 10-Feet,Wall thickness 0.035-inch0.9mm .Well packaged to protect the product well during transportation.. FeatureThe 38 aluminum fuel line Easy to bend, unroll, cut, form, straighten, Stable quality.Easy to work with and long lasting fuel line replacement option for professionals and do-it-yourselfers.. Material Made of aluminum alloy, extruded, with good processability and corrosion resistance.. Usage Use for hydraulic braking systems, fuel systems, and transmission systems, a 38 metal fuel line frome tank to pump, transmission cooler lines and so on.. Maximum working pressureMaximum working pressure rating of 650 PSI, This 38 aluminum tube is versatile enough to handle a variety of applications..

Size38 OD9.52mm,Length 25-Feet,Wall thickness 0.035-inch0.9mm .Well packaged to protect the product well during transportation.. FeatureThe 38 aluminum fuel line Easy to bend, unroll, cut, form, straighten, Stable quality.Easy to work with and long lasting fuel line replacement option for professionals and do-it-yourselfers.. Material Made of aluminum alloy, extruded, with good processability and corrosion resistance.. Usage Use for hydraulic braking systems, fuel systems, and transmission systems, a 38 metal fuel line frome tank to pump, transmission cooler lines and so on.. Maximum working pressureMaximum working pressure rating of 650 PSI, This 38 aluminum tube is versatile enough to handle a variety of applications..

3003 grade aluminum. Item Package Dimension 18.49L x 18.4W x 1.62H inches. Item Package Weight - 1.90 Pounds. Item Package Quantity - 1. Product Type - HARDWARE TUBING.

Details This fuel line hose is 38 Inner Diameter about 9.5mm, 58 Outer Diameter about 15.9mm, 10 FT in length Come with 2 hose ends and clamps, ensure that both ends of the fuel hose line are securely connected. Double Stainless Steel Braided Hose Excellent flexibility and resistance to abrasion and corrosion, such as in the interior space of a shaking engine holding numerous amounts of fluids. Still Works in Extreme Withstands temperatures from -40 to 257 -40 to 125 And 1500 PSI as maximum working pressure, 4500 PSI as bursting pressure This fuel hose is ideal for extreme environments where there is extra heat or where chaffing might occur. Compatible With all automotive fuels excluding alcohol, antifreeze, lubricants, and coolants etc. Quite commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line. Note Professional installation and bringing your own protective gear for use are highly recommended Please be careful of burst at the inlet and outlet, and beware sharp edges.

Ideal solution - this fuel line repair kit is designed to help ensure the proper function of the fuel system and match the fit and function of factory fuel line parts on specified vehicles. Cost-effective - saves time and expense by allowing the repair of just the failed fuel system components. Durable construction - the items in this kit are made from quality materials for reliable performance and long service life. Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience. Support available - every Dorman part is backed by Dorman's ASE Blue Seal Certified technical support team.

Specifications ID 389.5mm OD 2317mm. Minimum Bend Radius 3.9100mm. Wall thickness 3mm.. Parameter Working Pressure 300psi. Burst Pressure 1200psi. Temperature Range -40F to 257F.. Medium The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

Include a universal 12Ft fuel hose and 6pcs swivel hose ends Inner Diameter AN-6 38 - Outer Diameter AN-9 916. Perfect racing fittings for fuel injection use .The included swivel hose ends are rotary for convenient operation Fitting Type Straight, 45 Degree, 90 Degree. CNC machined items, based on premium stainless steel T6061 alloy aluminum materials. With anodized surface, it is hard and solid Working Temperature -40 to 350 Working Pressure 1000 PSI Burst Pressure 6000 PSI. Not Legal in the state of California New York, Not complies with C.A.R.B. regulations.

High QualityThis Fuel line assembly is made of premium quality rubber, Compatible with ethanol blended fuels, engineered low permeation material prevents fuel evaporation.. SizeUniversal 6 FT Outboard fuel line, Hose inner diameter 38 10mm, outer diameter 58 16mm.. Wide ApplicationThis fuel line siphon pump can transfer gas, diesel, Liquids. Suitable for Boats, RVs, Tractors, Caravans, Motorcycle, Jeski, Lawn Tractor, Lawn Mower, Snow Blower.. Easy to UsePut the fuel transfer hoses in where you want them and pump the hand pump and it draws out all the fluid. This gasoline siphon pump made it effortless to empty out my gas tanks.. AdvantageOutboard motor fuel line with bulb check valves allow priming in multiple orientations without restricting fuel flow.. NoteThis boat gas line with primer bulb is made of rubber product, please do not store this item under direct sunlight or other rough environment..

Specifications ID 389.5mm OD 2317mm. Minimum Bend Radius 3.9100mm. Wall thickness 3mm.. Parameter Working Pressure 300psi. Burst Pressure 1200psi. Temperature Range -40F to 257F.. Medium The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

Parameter Maximum working pressure 300 PSI. Burst pressure 900 PSI. Temperature range -20F to 221F -30C to 105C.. Material The Marine fuel line is made of an NBR inner layer and an NBRPVC outer layer, reinforced with a polyester fiber braid.. Applicability The Marine fuel hose is compatible with gasoline, diesel, E85, and more. It is widely used for supplying fuel to motors in boats or other marine applications.. Feature The boat fuel hose meets WEPA and CARB very low permeation requirements and is resistant to weather and UV exposure. It meets type A1-15 requirements for pleasure boats. It also meets SAE J1527 type A1-15, ISO 7840 type A1, and NMMACE accepted standards..

Bendable and Cutting Aluminum material is highly maneuverable, our this aluminum tubing is convenient for a wide range of jobs, and can be bent and cut, these characteristics make the tubing more flexible and convenient to install, and can be adjusted according to the actual needs. When cutting, it can be cut to the exact length needed to fit a specific installation space, and when bending, it can be easily shaped to fit the complex structure of the vehicle.. 650 PSI This aluminum tubing has a maximum working pressure rating of 650 psi, which means it is capable of safe and stable running at pressures up to 650 psi, with good pressure-bearing capacity to withstand pressure fluctuations in high-pressure fuel systems, providing reliable fuel delivery in both high-performance race cars and daily-use passenger vehicles.. Used in Many Systems Auminum tubing has a wide range of applications in the automotive industry due to its light weight and strong operability. From the tank to the pump of the fuel system, the transmission cooler line of the transmission system, the coolant line of the cooling system, the brake fluid line of the hydraulic braking system, aluminum tubing can give full play to its role.. Two Sizes The first one is 0.28 inch inner diameter, 0.38 inch outer diameter, 0.04 inch wall thickness, the whole roll is 16 ft long, the second one is 0.24 inch inner diameter, 0.31 inch outer diameter, 0.04 inch wall thickness, the whole roll is 16 ft long, you can according to your actual needs, combined with the size reference, to buy the one you need.. Recommended to Use with Tools When using, it is recommended to match with the following tools Trocar, mainly used for fixing the connection between pipes and fittings, pipe nut fittings, used for connecting two pipes, tightening the pipe nut to achieve a tight seal, 37 degree tapered AN fitting, suitable for high-pressure fluid systems, even in high-pressure environment..

Gas line replacement. Many local parts stores rent out flaring tools free. Cupronickel Bends and Flares with Ease. Many local parts stores rent out flaring tools .

38 O.D. Real Copper Nickel Tubing C70600. 12 Foot coil. Great for replacing a fuel or transmission line.

Diameter 38 Inch OD Length 25-FT Wall Thickness 0.035-inch. Material It is extruded from 3003 grade aluminium alloy which emits corrosion resistance properties and high pressure resistance. Easier to bend than steel tubing and cheapper than copper tubing.. High Pressure Rating With a maximum working pressure rating of 800 PSI, this fuel line is versatile enough to handle a variety of applications.. Feature Easy to bend, unroll, cut, form, straighten, flexible and install. Stable quality.. Used for automotive AC line, hydraulic braking systems, fuel systems, and transmission systems, fit for compression fitting..

Diameter 38 Inch OD Length 25-FT Wall Thickness 0.035-inch. Material It is extruded from 3003 grade aluminium alloy which emits corrosion resistance properties and high pressure resistance. Easier to bend than steel tubing and cheapper than copper tubing.. High Pressure Rating With a maximum working pressure rating of 800 PSI, this fuel line is versatile enough to handle a variety of applications.. Feature Easy to bend, unroll, cut, form, straighten, flexible and install. Stable quality.. Used for automotive AC line, hydraulic braking systems, fuel systems, and transmission systems, fit for compression fitting..

Nylon Braided CPE Fuel Line Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.. Universal Application The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Safety Features For Your Protection Fuel Hose SizeID 6AN, Length 20FT, Working Temperature -100 to 500 -73C to 260C , Pressure Tolerance 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. Package Includes 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..

Material - Inner hose CPE synthetic rubber Outer layer stainless steel wire braided. Applications Automobile or ship engine fuel, racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil coolant etc, NOT FIT E85.. Color Silver, Length10 Ft, Inner Diameter 0.34 8.71mm, Outside Diameter 0.55 13.89mm. Working Temperature -40F to 260F, Working pressure 1000 PSI Burst pressure 3000 PSI. Premium nylon fiber and stainless steel wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.. NOTE Not Legal in the state of California New York, Not complies with C.A.R.B. regulations, Not for sale in the states of CA and NY. No instruction or direction included in the package, Professional installation is highly recommended..

Application for Racing Fuel, Pump Gas, Fuels with Ethanol, Alcohol Based Fuels, Motor Oil Coolant etc. Length25 Ft , Inner Diameter 8.73 mm 0.343, Outside Diameter 13.89 mm 0.547, Universal Accessory, Easy to Operate. Good Quality and Durability, Working Temperature -40F to 248F -40C to 120C under most operating conditions Working Pressure1015 PSI - Burst Pressure 6090 PSI. Braided fuel hose with special hand feel. Perfect racing fittings for fuel injection use.

Premium MaterialT7 Aluminum Alloy Nylon PTFE Teflon PTFE has excellent corrosion resistance. Polished and anodized surface provide the bright appearance, corrosion protection and strong strength. It is maintenance free and precision engineered to increase life. Braided gas line Inner diameterInner Diameter 516 inch, outside diameter 0.465inch. Please measure before purchase. Working TemperatureWithstands Operating Temperatures from -76 to 446. Working Pressure 3000 PSI. Can work in environments with large temperature differences. Wide ApplicationThis 6AN 25FT braided PTFE Lined Hose Kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line, turbocharger fuel line and other high temperature high pressure applications. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended.

PVF-coated for ultimate rust corrosion protection. 30x more resistant to corrosion than standard steel. Superior bend-ability without kinking. Meets all SAE and ISO specifications. USA made with Lifetime Warranty.