PERFECT FIT FOR 2.5 OD-ID SLIP FIT CONNECTIONS - ROADFORMER 2.5 inch exhaust clamp is designed to connect 2.5 OD pipe into 2.5 ID pipe for exhaust pipe, muffler inlet, muffler outlet, elbow joint, catalytic converter, and exhaust system repair applications. STAINLESS STEEL NARROW BAND CLAMP - Made with a stainless steel band for strength, corrosion resistance, and long service life. The narrow band design provides a clean, compact fit while delivering strong sealing performance on exhaust connections. 360 CLAMPING WITHOUT PIPE DAMAGE - Roadformer Reaction Block Technology helps distribute clamping force evenly around the pipe, creating a secure seal while reducing the risk of pipe distortion, crushing, or damage to exhaust pipe ends. STRONG 10.9 GRADE BOLT FOR SECURE SEALING - Built with a 10.9 grade bolt to provide high clamping force for a tight, serviceable exhaust joint. Recommended working torque 4050 ft-lbs. For best sealing results, exhaust sealant may be applied before installation. EASY NO-WELD INSTALLATION, 2 PACK VALUE - Pre-attached hardware makes installation fast, accurate, and removable. No welding required. Each pack includes 2 pieces of 2.5 inch narrow band exhaust clamps for repair, replacement, and custom exhaust work.

PRECISE 2.5 FITMENT FOR EXHAUST TURBO SYSTEMS - Engineered for 2.5 inch OD exhaust piping with precision-machined male and female flanges to ensure perfect alignment, tight sealing, and zero exhaust leakage under pressure.. QUICK RELEASE DESIGN FOR EASY INSTALL SERVICE - Vband clamp structure allows fast installation and removal without gasket replacement, ideal for turbo builds, performance upgrades, and frequent maintenance applications.. COMPLETE 2-SET KIT - Includes 2 full assemblies V-band clamp male flange female flange, providing a complete solution for dual connection setups or spare installation needs.. PREMIUM STAINLESS STEEL FOR HIGH PERFORMANCE USE - Constructed from heavy-duty stainless steel with corrosion resistance, high-temperature durability, and vibration-resistant T-bolt locking system for long-lasting performance.. IDEAL FOR TURBO EXHAUST APPLICATIONS - Perfect for turbocharger systems, downpipes, intercooler piping, exhaust fabrication, charge pipes, and custom performance builds requiring a secure and reusable sealing connection. ENGINEERED V BAND CLAMPS - ROADFORMER Stainless Steel V-Band flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation. The back side of our V-Band flanges feature a recessed lip to help center your stainless steel tubing to the flange.

This 2.5 inch T bolt hose clamps are 100 stainless steel, 14-28 Stainless Steel Bolt, 304 Stainless Steel Band in Floating Bridge, and Nylon Insert Locknut.. Roadformer 59mm - 67mm T-Bolt Clamp Working Range Diameter 2.31 - 2.64 same as 59mm - 67mm for 2.5 inch Hose O.D. - not I.D. Please be noticed and suggest measure your Hose O.D. before purchasing. Our TBolt Hose Clamp provide leak proof seal for hose and tube assemblies, These T-Bolt Clamps featured in outstanding performance in Anti-rust and Anti-corrosion and provide uniform sealing pressure for a positive, reliable connection even in pretty hard working environment. Roadformer T Bolt Hose clamps are designed to use in the situation of high vibration and high pressure with great performance in keeping consistent force and long-term durability. These t bolt hose clamps are widely used in Automotive, heavy trucks, industrial machinery, off-road equipment and Agriculture industry. These T-Bolt Hose Clamps are much easy and convenient to install and use. Simply slide the clamp overlap the hose, adjust the bolt position and use a wrench or common hand tools to achieve your desired tightness. 2 Pieces in Package - ROADFORMER credited in Premium Quality and our private label products does set industry Standard.

Material304 stainless steel band, zinc-plated M10.9 bolt and nut, steel gasket, aluminum alloy I-block.. Advantage Ease of Installation This exhaust band clamp sleeve comes with fastening bolts. You only need to tighten or lose the bolts to connect or release. No welding required, easy to use.. Size Joins 2.5OD pipe to 2.5ID pipe, width of strap 3.5 inch 88mm.Confirm the size before buying. Application Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.system components such as pipes, mufflers, catalytic converters etc.. Features These exhaust clamps adopt an integrated structure, minimizing the complexity of the number of parts and maximizing material efficiency, thereby reducing weight. 12.9 degree high-strength fasteners provide true sealing force, and the unique reaction block provides 360 uniformly distributed tensile force, completing sealing around the connected exhaust components while preventing pipelined deformation.. Enhanced Sealing PerformanceOur exhaust pipe clamps, paired with high-quality sealant, ensure a tight fit after installation, preventing gas leaks and improving the overall performance of the exhaust system..

Size Fit for EVIL ENERGY 2.5 inch Flange. Not including flanges. Advantage V band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange. Material Stainless steel clamp. chromium-molybdenum steel T bolt. Long durability and reliability, corrosion resistance, and high temperature resistance. T-bolt Thread size M81.25 Lenght 2.63inch. Application Compatible for exhaust system, turbocharger, downpipe, muffler etc.

Size Joins malefemale flange 2.5 ID to 2.5 OD pipe. T-Bolt thread size M81.25.. Advantage V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange.. Feature Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation.. Material Stainless steel clamp and flanges, mild steel T-Bolt 304 stainless steel for long durability and reliability, corrosion resistance and high-temperature resistance.. Application Compatible for exhaust system, turbocharger, downpipe, muffler etc..

Our 2.5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water.. Universal fitment, Joins Joins 2.5 OD Pipe to 2.5 ID Pipe. Besides, we also provide other different sizes to fulfill your needs. You would better measure before pruchase.. These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.. Easy to install, Our joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.. OTE Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service .

Size Our 2.5 exhaust clamp joins 2.5 OD to 2.5 OD pipe Width of strap 3inch76.2mm Torque 63 Nm. Advantage The 2.5 inch exhaust clamp is easy to install and remove without welding. Application The exhaust clamp is a butt joint clamp simply and effectively connects exhaust system components, such as mufflers, pipes, catalytic converters, etc. Material 304 stainless steel band Zinc-plated M10 bolt and nut Steel gasket, Aluminum alloy I-block. Feature Making the force of 360 evenly distributed, the band clamp provides a seal and prevents material deformation.

Crafted with thickened 304 stainless steel bands and zinc-coated bolts, this clamp resists corrosion and rust in harsh environments. Rolled-edge construction prevents pipe scratches, while cold-rolled chromium layer ensures long-term durability for exhaust systems.. Aluminum alloy I-block evenly distributes clamping force, creating a leak-proof connection for pipes, mufflers, and catalytic converters. Prevents deformation even under high-pressure vibrations ideal for headers or turbocharged exhaust setups.. Designed specifically for 2.5 outer diameter OD exhaust pipes. Effortlessly connect or repair components without welding perfect for quick fixes on catalytic converters, mufflers, or pipe joints.. Widened stainless steel band and dual-bolt tension control maintain a rock-solid grip. Withstands extreme engine vibrations, allowing repeated disassembly and installation without loosening or performance loss.. Buy with Confidence If you have any questions about our product, please let us know, we will definitely provide you with a good solution..

Pay Attention Please measure the pipe's outer diameter before purchase. Our exhaust clamp joins 2.563.5mm - 0.2mm OD pipe, width of strap 1.2 inches31 mm. The thickness of the strap is approximately 0.717.78mm. Engineered 304 Stainless Steel Our exhaust pipe clamp crafted from durable 304 stainless steel with a zinc-plated M10 bolt, this material offers strong corrosion resistance and maintains integrity under high heat and harsh road conditions for long-term performance. High-Strength 360-Degree Seal Equipped with an aluminum alloy I-block and Grade 10.9 bolt that evenly distributes over one ton of clamping force around the pipe, creating a leak-proof seal without crushing or distorting pipe ends. No-Weld Quick InstallationThe automotive replacement exhaust clamps has Pre-attached hardware and a straightforward design allow for tool-friendly installation or removal. The setup requires no welding, making repairs and maintenance simpler and faster for various exhaust components.. Dependable Connection Support We provide clear assistance for product fitment or performance questions. If a size issue or defect arises, contact us directly for prompt help in resolving your concern.

Pay Attention Please measure the pipe's outer and Inner diameter before purchase. Our exhaust clamp joins 2.5In63.5mm - 0.2mm OD pipe to 2.5 ID pipe, width of strap3 inches76 mm. The thickness of the strap is approximately 0.25.08mm. Durable 304 Stainless Steel The exhaust pipe clamp is constructed from high-grade 304 stainless steel with a zinc-plated bolt for maximum corrosion resistance. This material offers reliable performance under extreme heat and harsh conditions, protecting your exhaust system with long-lasting strength. Advanced Leak-Proof Seal Our exhaust coupler I-block design creates 360-degree force distribution for a complete, rounded seal. This technology provides superior containment compared to standard U-clamps, preventing exhaust leaks and maintaining system integrity. Quick-Install Design The muffler clamps, Pre-threaded hardware and a no-weld design allow for straightforward installation and removal. The dual-bolt system resists loosening from vibration, enabling a secure connection that simplifies maintenance and service. Universal Exhaust Application The exhaust band clamp is Ideal for connecting pipes, mufflers, elbows, and catalytic converters. Suitable for automotive, performance, and industrial systems, this clamp offers a versatile solution for both repair projects and custom exhaust assemblies.

FIT SIZE 2.5 Exhaust Clamp, Our 2.5 inch ID Exhaust Clamp Fit for 2.5 OD to 2.5 OD Exhaust Pipe, Muffler Pipe, Muffler Inlets, Outlets, Elbow Joints and Pipe.. QUALITY MATERIAL Exhaust Clamps 2.5 Inch, Made From Durable And Robust 304 Stainless Steel Material Will Not Never Rusts And Corrodes For Long Service Life.. WIDE APPLICATION Tirol 2.5 Inch Exhaust Clamp Provide Superior 360 Degree Clamping And Sealing On Exhaust System Components, Such As Pipes, Mufflers, Catalytic Converters, Etc.. EASY TO MOUNT 2 12 Exhaust Clamp, No Welding Design, Epre-Attached Hardware For Fast and Accurate Installation, Or Remove. TIROL Exhaust Band Clamps Are A Simple And Effective Ways Clamping and Sealing Muffler Inlets, Outlets, Elbow Joints And Pipe..

SizeThis 2.5 inch T-bolt clamp features a working range of 2.76-3.0770-78mm, specifically designed for hoses with a nominal size of 2.5 based on I.D., not O.D.. A hose wall thickness of 5mm is recommended for optimal fastening performance.. Warm TipsBe careful in case your hose is pretty thin or much thick. Suggest you inspect your Hose Outer Diameter to select items with appropriate tighten up working range to fit your hose O.D. size before purchasing.. High QualityOur T-bolt hose clamps are made of premium 304 stainless steel band and galvanized nuts and bolts, which are durable, rust-proof, corrosion-resistant, wear-resistant and have a long service life.. Flanging DesignWith rounded flanging process on the edge of the steel band, radiator hose clamps can prevent sharp edges from cutting the pipe, and the surface of the band is polished, smooth and burr-free to protect the pipe from damage.. Wide Application The T-bolt hose clamp is suitable for DIY Turbo, Intake system, Intercooler, piping, radiator hoses, intercoolers, turbochargers, water hoses, motorcycle exhaust systems, marine applications, irrigation system hoses, water pump hoses, etc..

Size The ID of this exhaust clamp is 2.5, it can only connect pipes with an OD of 2.5. Please measure the diameter of your pipe before order. Stainless Steel The 2.5 inch exhaust adapter is made of high quality stainless steel, polished stainless steel surface, heavy duty, durable, heat and corrosion resistant. Ideal for Exhaust Repair Designed for join outer diameter of 2.5 inch pipes and tubes together without welding. The adjustable design giving you the flexibility to remove them for repair. Easy to Install Simply connect the two pipes together and tighten the high-strength bolts to form a tight connection. Customer Service Please feel free to contact us if you have any questions during use.

Perfect 2.5 OD to 2.5 ID Fitment Designed to join a 2.5 outer diameter pipe into a 2.5 inner diameter pipe at overlapping lap-joint connections. Ideal for exhaust pipe repair, muffler connection, turbo downpipe installation, elbow joints, flex pipes, and exhaust tubing. Please measure your pipe OD and ID before purchase. 360 Leak-Resistant Exhaust Band Clamp The wide band structure distributes clamping force evenly around the pipe connection for a tight, stable seal. Compared with standard U-bolt clamps, this 2.5 inch exhaust band clamp helps reduce pipe distortion and supports exhaust leak repair. Durable Stainless Steel for Exhaust Use Built with a corrosion-resistant stainless steel band and high-strength fasteners for long service life in hot, wet, and high-vibration exhaust environments. Suitable for automotive, truck, performance, and repair applications.. No Welding Required, Easy to Install or Remove Pre-assembled hardware allows fast installation with common hand tools. The lap joint exhaust clamp can be removed for service or adjustment, making it a cleaner and more flexible solution than welding. Universal Exhaust Pipe Clamp for Repair Projects Works as a 2.5 inch exhaust pipe clamp for mufflers, catalytic converters, resonators, turbo downpipes, flex pipes, elbows, and custom exhaust systems. Ideal for muffler repair, exhaust repair, and replacement of worn or leaking clamps.

Roadformer 2.5 exhaust clamp is to joint 2.5 OD pipe overlapping into 2.5 ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry.. This stepped 2.5 inch exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force. Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections. Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability. Roadformer exhaust clamps is dedicated in providing real value to our customers and end users. We set industry quality standard.

Size joint 2.5 inch OD pipe slip fit into ID pipe for connection. Width of strap 1.22 inch31mm. Perfect fit in clamping OD 2-12 inch pipe.. Material T304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.. Feature The narrow band clamp adds semi-circular gasket parts, it can hold the pipe tightly without loose. Unique seal and high clamp loads are provided, the band clamps make the force of 360 evenly distributed to provide a seal.. Application Narrow exhaust band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and Pipess. Different clamp has different application and features, find the one that suit your needs most.. Durable Pre-attached I block with high strength 10.9 Grade bolts provide best durability for your works..

APPLICATION the malefemale flange is 2.5 inch fit for 2.5 OD pipe. Clamp size will be bigger than 2.5 inch, make sure the size right. This assembly makes it easy to install and remove intercooler systems and turbo parts, such as charge piping, intake pipes, etc.. QUICK RELEASE DESIGN this design is ideal for applications that require frequent removal. It can be connected and disconnected faster while providing a leak-free seal with even pressure at the flange.. GREAT VALUE this package includes 2 clamp flange assembles. The price of each assembly is much lower than the market price. Save your money. HIGH QUALITY this assembly is made of 304 stainless steel for long durability and reliability, corrosion resistance, and high temperature resistance.. WARRANTY one-year warranty. We provide free service of replacement or refund, you can buy it with confidence. If you have any questions about our product, please contact us through email at any time..

Material304 Stainless steel band, Zinc-Plated 716-14 bolt and nut, Steel gasket, Aluminum alloy I-block.. Advantage Ease of Installation This exhaust band clamp sleeve comes with fastening bolts. You only need to tighten or lose the bolts to connect or release. No welding required, easy to use.. Size Joins OD pipe to ID pipe, width of strap 2.94 inch 74.82mm.Confirm the size before buying. Application Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.system components such as pipes, mufflers, catalytic converters etc.. Features These exhaust clamps adopt an integrated structure, minimizing the complexity of the number of parts and maximizing material efficiency, thereby reducing weight. 12.9 degree high-strength fasteners provide true sealing force, and the unique reaction block provides 360 uniformly distributed tensile force, completing sealing around the connected exhaust components while preventing pipelined deformation.. Enhanced Sealing PerformanceOur exhaust pipe clamps, paired with high-quality sealant, ensure a tight fit after installation, preventing gas leaks and improving the overall performance of the exhaust system..

Size Details Exhaust clamp ID 2.5 inch, Exhaust hanger Rod 7 inch5.5 of Thread. M10 thick and strong rod hanger with 38 screw nuts provide a durable way to securely mount your exhaust system.. Material T201 stainless steel exhaust clamp with exhaust hanger rod. Stainless steel material ensure you can use this exhaust clamp hanger for longer life. Wear-resistant and corrosion-resistant. Please note, even T201 stainless will have a little magnetic reaction, but it is more durable and anti-rust during use.. Fitment Universal fitment. Perfect to hold 2 12 inch exhaust pipe and adjust hanger to desired length. You can cut off excess portion of hanger if need be.. Installation Bolt-onClamp on. Easy for anyone who has the issue of exhaust pipe wobbling.Just make sure the size of the clamp you may need. This heavy duty exhaust hanger is built to last under high exhaust temperatures.. Package includes two pieces 2-12 inch exhaust clamps. Also we have multi kinds of exhaust hangers, please choose the one that fits your application most..

Design This kit is specifically designed for 2.5 exhaust pipes. The flanges feature a recessed opening which allows for a 2.5 exhaust to easily slip inside the flange, providing a perfect overlap seam for welding. The exhaust clamp design allows for a gasket free seal.. ApplicationComplete V-band kit is ideal for performance exhaust systems, downpipes, catback exhausts, turbo back exhausts and more. Perfect fit for turbo and high horsepower vehicles.. Easy On Off A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. perfect for applications requiring frequent removal. They provide a quicker disassembly yet provide a great seal with even pressure at the flange. Package IncludesThis complete 2.5 inch stainless steel Vband kit includes 1 x female flanges,1 x male flanges,1 x V band clamps.Joins 2.5 OD pipe to 2.5 OD pipe. T-Bolt thread size M81.25.. Service100 satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Flanges ID 2.5 inch. Package includes 4 X V band Clamp, 8 X V band flangesMaleFemale. Great for racers and tuners, these clamps make it easy to remove parts to gain access to vital components easily as there are no hard hard to reach bolts or special tools needed. Simply undo the clamp and you can remove the component easily.. Professional installation is highly recommended.

Stainless Steel Construction each package includes 2 robust muffler clamps Crafted from 304 stainless steel to provide nice corrosion resistance, long service life, and dependable performance under high-temperature conditions. Direct-fit Replacement Design designed for precise compatibility with select vehicle models, allowing straightforward installation without cutting or welding Matches original mounting positions. Precise Dimensions for Proper Fitment our 2.5 inch muffler clamps are specifically designed to fit 2.5 inch outer diameter muffler pipes Overall length and diameter are engineered to meet factory specifications Please refer to the product images and size chart to confirm compatibility before purchase. Optimized Flow Performance smooth internal structure supports stable airflow, helping maintain consistent engine operation and efficient performance during daily driving. Heat Impact Resistant Build built to withstand extreme heat and harsh road conditions, reducing the risk of deformation, cracking, or premature wear over time.

SizeID 2.5 exhaust u clamp, fits for 2.5 2-12 inch OD pipe.. MaterialHigh quality T201 Stainless Steel. Thick thread rod and strong saddle bracket ensure its sturdy and strong. Our exhaust u-bolt clamp will not break or deform during use.. Heavy DutyThe SS heavy duty muffer clamp with reinforced ribs on the saddle flange, expertly crafted and durable construction for long service. The high quality and craftmanship of the heavy duty clamp can resist corrosion and out of shape during use.. SimpleRemovableReusableNo Welding Design makes the clamp can be installed by a faster and eaiser way. For anyone, it is so simple to make a fixing or repairing job. This u bolt clamp can be used for fixing various pipes, and also it can be used in other applications. Easy to installremovalreuse.. Anti-Rust and DurableThis muffler u bolt clamp has been sold in the market for many years and tested by customers for its durability and anti-rust. For customer needs, we are now launching a two-pieces set and offering more size options. Hassel-free shopping with us..

Material Our u-bolt clamp is made of high quality stainless steel, polished stainless steel surface, light weight, heat and corrosion resistant, durable. Size 2.5 inside diameter u-bolt exhaust clamp, fits for 2.5 Outer Diameter OD Pipe. Stainless Clamp The stainless steel heavy duty u-bolt clamp is consisted of u-bolt, saddle flange and two nuts. Easy to Use U-bolt muffler exhaust clamps with No welding design are easy and fast to install. Removable and Reusable. Package Include 2 Pieces heavy duty u-bolt exhaust saddle style clamp.

Size 2.5 inch inner diameter 63-68mm, suitable for 2.5 outer diameter pipe.. MaterialU Bolt Clamps made of high-quality stainless steel, corrosion-resistant and not easily deformed.. Function Widely used, suitable for muffler inlet and outlet, exhaust pipe inlet, elbow and pipe sealing, etc.. Easy to install The exhaust clamp is installed with bolts, no welding is required, and the installation is simple and quick..

Rugged Double-Layer Design Constructed with a dual-layer 304 stainless steel band for enhanced strength and durability. This reinforced structure significantly reduces the risk of exhaust leaks and provides reliable performance in demanding automotive environments. Precision 2.5-Inch Butt-Joint Fit Engineered specifically to connect two 2.5-inch outer diameter pipes end-to-end. With a wide 3.5-inch88mm strap, it offers a secure and complete connection for exhaust systems requiring a precise butt-joint solution. Uniform 360-Degree Clamping Features an aluminum I-block that distributes force evenly around the entire pipe circumference. This design prevents pipe distortion while creating a tight, leak-resistant seal under high pressure and vibration. Straightforward Bolt-On Installation Designed for simple installation with a bolt-and-nut system, eliminating the need for welding. The hardware is included for a direct setup, allowing for adjustments or future removal with basic tools. Reliable Automotive Solution Ideal for connecting catalytic converters, exhaust manifolds, flex pipes, and mufflers. This clamp provides a solid, long-term connection for repair and assembly projects across various vehicle exhaust systems.

High QualityThis Butt Joint Band Clamp is made of 304 stainless steel for long durability and reliability, zinc-plated M10 flange bolt and nut, steel gasket, and aluminum alloy I-block.. FunctionThe exhaust clamp can be applied for a connection to exhaust pipes, mufflers, catalytic converter connections, and etc. It can hold the pipe tightly without loosening. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service.. SizeJoins 2.5 OD pipe to 2.5 OD pipe, width of strap 3inch 76.2mm. Package includes 2 PCS Exhaust Clamps.. ApplicationSeal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, and Exhaust Muffler Repair Projects.. Easy to InstallYou just need to tighten or lose the bolts to do connection or releasing. No other welding is needed. The clamps have been tested for strength and are reusable without damaging the pipes.. Service100 satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Practical 3-Pack Bundle This value bundle includes 3 pieces of 2-12 inch 65mm heavy-duty U-bolt exhaust clamps, perfect for most standard repair jobs on a single vehicle or for mechanics to use on multiple projects. Durable Corrosion-Resistant Forged from high-quality galvanized carbon steel, this clamp is built to withstand high temperatures and resist corrosion, providing a secure, long-term solution for your exhaust system needs. Accurate 2.5-Inch OD Fit Designed with a 2-12 inch 65mm inner diameter, this clamp is the perfect match for pipes with a 2.5-inch outer diameter. Always confirm your pipe's OD before purchasing to ensure a snug and secure fit. Reinforced Saddle Flange Design The saddle flange is reinforced for extra strength, distributing pressure evenly and creating a 360-degree seal that prevents leaks and withstands vibration from diesel or gas engines. Professional-Grade Solution A trusted choice for professional diesel and gas exhaust repairs, reattaching exhaust tips, and sealing pipe joints. Essential for garages, fleet maintenance, and serious car enthusiasts.

Fits 2.5 OD Exhaust Pipes The exhaust clamp securely connects two exhaust pipesone with a 2.5-inch outer diameter and one with a slightly smaller sizeensuring a tight seal for muffler inlets and outlets, elbows, and coupling pipes.. Durable 304 Stainless Steel Construction Made from premium 304 stainless steel, this U clamp has a passivated surface, making it resistant to heat, corrosion, and wear for long-term performance in harsh environments.. Reinforced and Secure Connection Evil Energy's U-bolt clamp has a thickened slot, which is much stronger and less prone to deformation, while the high-strength stainless steel nuts with anti-slip teeth ensure a tight, vibration-resistant hold and prevent the nuts from loosening.. Easy Installation, No Welding Our U muffler clamp features precision-machined threaded rods for fast and secure installation, and it is fully detachable and reusable for convenient maintenance or adjustments.. Complete Installation Kit Included Comes with 2 x heavy-duty U-bolts for 2.5-inch OD exhaust pipes, 2 x saddles, 4 x 38-inch nuts, and 1 x wrench, ready for quick and effortless installation..

Quality Construction Built with premium-grade steel, AFEISOL exhaust U clamps provide exceptional durability, galvanizing the surface makes it rust-resistant, corrosion-resistant and withstand extreme heat and harsh environments, provide reliable performance for automotive repairs and custom exhaust projects. Universal Fit for Muffler Exhaust Systems These muffler exhaust clamps are designed for sealing muffler inlets and outlets, elbow joints, piping, and maintaining exhaust systems. Prevents leakage of exhaust gases and noise. And the pipe ends must not be damaged or deformed. Saddle-Style Design for Leak-Free Sealing The reinforced saddle shape ensures even pressure distribution, preventing exhaust leaks while maintaining a tight grip with the U-Bolt Clamp mechanism. Easy Installation Adjustable Tension These exhaust pipe clamps allow quick adjustments and hassle-free installation using standard tools Spot welded trusses on the saddle prevent the clamp post from opening or losing contact when tightened Removable and reusable, very user friendly. Package Includes 2 Pack universal muffler tip exhaust hook U-Bolt mild steel clips fits for OD 2-12 exhaust pipe, which consisting of U-bolt, saddle flange and nut with nut washer.

HEAVY-DUTY MATERIAL - The joint exhaust muffler clamps are made of high-quality 304 stainless steel and well polished with a smooth and beautiful finish surface. You don't need to worry about them being rusty, corroded or cracked, which is durable, removable and reusable.. FEW MINUTES ASSEMBLY - Compose of flexible bolts, nuts and I-block, you can quickly and accurately complete the installation of butt joint exhaust clamp in a few minutes without welding. They are universal metal exhaust clamps that fit 2.5-inch OD pipes to 2.5-inch OD pipes.. GREAT VALUE PACK - Packages include 4 packs of stainless steel exhaust clamp, each has a length of 3 inches and inside diameter of 2.5 inches, which fits perfectly exhaust pipes, mufflers, manifolds, catalytic converters with an outer diameter of 2.5 inches.. WELL SEALED AND WIDELY USED - Our exhaust band clamp sleeve can provide a 360 even distribution of stretching forces to prevent leaks and material distortion while completing a good seal around the joined exhaust parts. Great for exhaust pipes, mufflers, catalytic converters, downpipes, manifolds and more.. NICE AFTER-SALES - We guarantee to provide you with a trustworthy refund service within 30 days. Please feel free to contact us if you have any dissatisfaction or improvement problems about exhaust clamps 2.5 inch, and we will reply to you as soon as possible within 24 hours..

HIGH QUALITY V-band clamp and flanges is made of 304 stainless steel for long durability and reliability, Corrosion resistance, high temperature resistance. They work very well in operating conditions involving stress, vibration and extreme temperature fluctuations. APPLICATION V-Band Clamps makes it easy to install and remove. EASY INSTALLATION No special tools needed, Simply removing a single nut and you can remove the component easily. PACKAGE INCLUDED 2 x Stainless Steel V-band clamp 4 x Stainless Steel MaleFemale Flanges, Same as the pictures. Upgraded bolt, high strength and not easy to break.

ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time.. EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing.. TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers.. PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches.. SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..

Joins 2.5 OD pipe to 2.5 OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap 3inch 76.2mm. Package 2pcs.. Application Butt joint band 2.5 exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes.. Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 12 exhaust clamp come with an I-block which creates a complete Inner-circle Seal when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks.. Material 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque 63 Nm.. Note There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

Size ID 2.5 inch clamp, joins 2.5 OD-ID slip fit pipe. Width of strap 1.22 inch 31mm. Thickness of strap aprox 1.89mm.. Material Premium T-304 stainless steel band to ensure durability corrosion resistance, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.. Easy to Install No welding design, pre-attached hardware for fast and accurate installation, or remove.. Application An effective way to connect most exhaust system components, aslo can be used for muffler repair or catalytic converters.. No Damage to Pipe Unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal..

ROBUST MATERIAL Made of galvanized carbon steel with a bright finish for lasting performance. PRECISE FIT Designed for pipes with 63.5mm 2.5in. outer diameter ideal for standard exhaust tubing. EASY INSTALLATION Bolt-tightening design allows quick fitting without welding or special tools. TIGHT SEALING Uniform pressure prevents joint vibration and loosening under heat and motion. MULTI-PACK VALUE Includes 10 U-bolt clamps for vehicle exhaust repair or pipe reinforcement projects.

Premium 304 Stainless Steel Exhaust ClampsOur 2.5 inch exhaust clamp is made of high-grade 304 stainless steel, the muffler band clamps offer exceptional corrosion resistance, rust prevention and superior durability, ensuring long-lasting durability and reliability even in harsh environments and extreme temperatures.With its outstanding durability, the muffler clamp provides long-lasting reliability for vehicle's exhaust system, effectively reducing maintenance costs and replacement frequency.. Superior Sealing Performance Sealing is where this clamp truly excels. The innovative I-shaped aluminum alloy block evenly distributes clamping force, creating a 360 secure, leak-proof connection. Unlike traditional clamps, its full clamping area design seals the entire connection without distorting pipes or tubing. With two pre-threaded nut rods, it remains firmly in place,unaffected by internal forces or vibrations.It's the ultimate choice for reliable, efficient exhaust system connections.. Easy to InstallWith user-friendly design, joint band clamps can be quickly installed using standard tools. Before starting to tighten, partially screw the two bolts into the gasket and gradually alternate tightening between the two bolts to ensure even pressure distribution, prevent deformation, and ensure a leak free seal between the pipe clamp and the pipe wall. Its modular structure allows for easy disassembly during maintenance or system upgrades without damaging the connected pipes.. Wide ApplicationOur lap joint exhaust band clamp 2.5 inch is a simple and effective method for connecting exhaust system components, suitable for connecting mufflers, catalytic converters, exhaust pipes, cat back systems, racing exhausts, display vehicles and turbo downpipes, making it a must-have for maintenance, upgrades, and customization. In the fields of automotive modification, industrial exhaust systems, and marine engines, joint exhaust pipe muffler clamp plays a crucial role.. Package Included2pcs exhaust clamps 2.5 inch, including 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, and aluminum alloy I-block. 2 12 lap joint exhaust clamp joins 2.5 OD pipe to 2.5 ID pipe. Our exhaust pipe repair clamp combines excellent quality and precision engineering to ensure precise dimensions and robust lap joints, providing a secure and leak-free seal that can withstand the test of time. Please measure the pipe outer and inner diameters before purchase..

Maximum Diameter 2-34 Minimum Diameter 2-12Hex Nut 15mm Metric Band Thickness 116 Band Width 1-14. Connection Type ID-OD slip fit connection with either straight or Z compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely.. Distributes the clamping force evenly over the entire 360 to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.The 304 stainless steel and galvanizing process prevent clamps from rusting.. Application Seal exhaust clamp is the muffler repair parts, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects.. Easy to handle and disassemble. Suggestion Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..

Size Inner diameter 2.5 inch-2.625 inch, width of strap 3inch 76mm, thickness of strap approx 0.6 mm.. Application Lap joint clamp is an effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.. Easy Installation Designed with a bolt and nut construction, no welding required, easy to install or remove.. Durable 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block, corrosion resistance to alkali solution and most organic and inorganic acids.. Better Seal The band clamp makes the clamping force 360 evenly distributed, provides a better seal and prevents exhaust gas and noise leaks..

COMPATIBILITY Fits 2005-2005 Chrysler 300 2006-2006 Chrysler 300 2007-2007 Chrysler 300 2008-2008 Chrysler 300 2009-2009 Chrysler 300 2010-2010 Chrysler 300 2008-2008 Dodge Challenger 2009-2009 Dodge Challenger 2010-2010 Dodge Challenger 2006-2. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. SUPERIOR SEAL -- Provides superior 360 clamping and sealing on muffler inlets, outlets, elbow joints and pipe. AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for your vehicle repair needs. PREMIUM MATERIALS--Made from a variety of materials including low-carbon steel or stainless steel for durability and long life. BETTER TOGETHER -- Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade.

ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time.. EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing.. TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers.. PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches.. SATISFACTORY SHOPPING EXPERIENCE - If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..

Joins 2.5 inch OD Pipe to 2.5 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, muffler and catalytic converters. Width of strap 2.94inch 74.8mm. Torque 63 Nm. Package 2pcs.. Connection Type ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe.. Distributes the clamping force evenly over the entire 360 to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.. Material 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the sections being clamped have sufficient lengths of straight pipe leading into it. It is removable and reusable, easy to install without welding.. EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

Precise Fit for 2.5 Exhaust Systems Specifically designed for 2.5 OD outside diameter exhaust pipes, ensuring a seamless and secure connection for mufflers, catalytic converters, and piping.. No-Weld Design Simplifies installation and removal without specialized tools or welding expertise, saving time and effort during repairs or modifications.. Construction Made from 304 stainless steel band, zinc-plated M10 boltnut, steel gasket, and aluminum alloy I-block for corrosion resistance and longevity.. Leak-Free Seal 360 evenly distributed clamping force prevents exhaust leaks, reduces vibration, and avoids pipe deformation under high torque 75 Nm.. 2-Year Assistance Contact our support team anytime for help with product questions or concerns..

Durable Material Our product is made from stainless steel which is highly resistant to rust and corrosion, making it ideal for use in the exhaust system, which is constantly faced with different conditions. Stainless steel can withstand the high temperatures generated by the exhaust system, ensuring that the clamp maintains its structural integrity.. Secure Connection Our clamp provides a strong, tight seal that prevents exhaust gases from leaking at the connection points. This is crucial for maintaining proper exhaust flow and ensuring the catalytic converter functions effectively. The secure connection minimizes movement and vibration within the exhaust system, reducing the possibility of loosening over time and preventing potential damage to the catalytic converter and exhaust pipes.. Leak Prevention Our clamp creates a tight, secure seal around the connection between the catalytic converter and the exhaust pipes. This seal is essential to maintaining the proper function of the exhaust system and reducing emissions. The design of our clamp ensures that pressure is evenly distributed around the entire circumference of the connection, minimizing the possibility of gaps or weak spots that could lead to leaks.. Universal Fit Our universal fit clamps are designed to accommodate different exhaust pipe sizes and configurations, making them suitable for different vehicles, including cars, trucks, and SUVs. The universal design allows the clamp to be easily installed in different positions along the exhaust system.. Easy Installation Our exhaust clamps are designed to be installed with basic hand tools like wrenches or socket sets, making the installation process straightforward and accessible. Our clamp features a straightforward design, that easily fits around the exhaust pipes. This allows for quick and secure tightening without complex procedures or specialized equipment..

Exhaust Pipe Clamp Size Our 2.5 inch butt joint exhaust clamps for exhaust, muffler, catalytic converter connections from 2.5 inch OD pipe to 2.5 inch OD pipe. Steel band width 3inch76.2mm. Warm tips Before purchasing our products, please check and measure your pipe OD carefully to make sure it fits the working range.. High Quality The butt joint exhaust pipe clamp is composed of 304 stainless steel band, aluminum alloy I-shaped blocks, galvanized bolts and nuts, and steel gaskets. The 304 stainless steel material is not easy to rust, corrosion-resistant, durable, and the surface of the steel band is polished without burrs.. 360Sealing Protection This exhaust clamp has a 360 tight fit and the aluminum I-block provides 360 of evenly distributed tension to prevent leakage and control material deformation while completing the seal around the connected exhaust components.. Easy to Install Exhaust clamps are designed without welding, you just need to tighten or loosen the bolt to easily install or remove, flexible disassembly and installation, save time and effort, reusable.. Application The butt joint exhaust pipe clamp are widely used for exhaust pipes, mufflers, catalytic converters, etc..

Product Size Joins 2.5 OD pipe to 2.5 ID pipe, width of strap 2.93 inches 74.5 mm. The thickness of strap is approximately 0.240.6mm. Warm tips Before purchasing our clamp, please carefully check and measure the OD and ID of your pipe. Our lap joint clamp is suitable for pipe walls with a thickness of 0.06-0.0711.5-1.8 mm.. Installation Guidelines 2 sets of exhuast clamps are in the one box. Partially thread both bolts into the gasket before initiating tightening. Gradually alternate tightening between the two bolts to ensure uniform pressure distridution. This prevents band distortion and guarantees a leak-free seal between the clamp and pipe wall.Simply wrap an aluminium foil around the connection before installation is the best.. Premium 304 Stainless Steel Construction Crafted with high-grade 304 stainless steel, these muffler clamps delivers superior durability, corrosion resistance, and rust protection. Its cold-rolled design and chromium oxide layer ensure reliable performance in harsh conditions, offering long-lasting strength and stability even under extreme temperatures.. 360 Superior Sealing Features an I-shaped aluminum alloy block that evenly distributes clamping force for a secure, leak-proof connection. Its precision-engineered design ensures tight pipe grip and optimal sealing performance, even under high-pressure conditions.. Versatile Repair Solution Designed for durable, leak-free repairs on pipes, mufflers, catalytic converters, and more. Ideal for automotive, industrial, and household applications, these clamps provide a quick, secure, and long-lasting fix for damaged or loose components..

STRONG STRUCTURE Made from zinc-plated carbon steel for heat and rust resistance in exhaust applications. 4 Pack. FITS 2.5 OD PIPE Correct size for pipes with 2.5 inch outer diameter, not for expanded or slip-fit ends.. EASY INSTALLATION Simple U-bolt style design requires no welding and can be removed or reused.. SECURE CONNECTION Provides firm compression and minimizes leakage in muffler or pipe joints.. MULTI USE Suitable for automotive exhausts, tailpipe joints, and metal pipe assembly projects..

Dimension Adjustable Inner Band-inner diameter range is 2.39 to 2.5, connect two 2.5 inch equal Outside Diameter pipes. For 2.5 Inch Outside Diameter Tubes Only. Width of strap 3.35inch 85mm, thickness of strap inner approx 0.8 mm, outer approx 1.2mm.. Adjustable Inner Band Loosen the inner ring to ID 2.5this is the recommended maximum loosening dimension over-loosening affects locking performance. When inner ring fully tightened, inner diameter is 2.3960.73mm.. Material 304 Stainless steel band, 304 stainless steel M10 bolt and nut, steel gasket, aluminum alloy I-block, resistant to corrosion and rusting.. Feature Double-layer structure design, thicker and stronger. Provide 360equal distribution of the clamping force to prevent leaks without distorting pipe.. Easy to Install Designed with a bolt and nut construction, no welding required, easy to install or remove. If the tube is locked tight enough that you don't have to keep screwing it. The gap next to the I-shaped aluminum block is normal and does not affect function. The nut can not hand thread all the way up the bolt, you need to use a tool, please wear gloves during installation to prevent injury.. Application Effectively connect catalytic converters, exhaust ports, exhaust manifolds, exhaust resonators, exhaust flex pipes, and muffler repair..

Durability Made of carbon steel, galvanized surface, heat resistant, corrosion resistant. Size 2-12 in. ID, fits 2-12 in. OD pipe. Easy to install Weld-free design makes installation quick, easy and accurate, removable and reusable. Function Compression hose, reconnects diesel gas exhaust, even on fence gates excellent sealing and high clamping loads prevent exhaust gas and noise leakage tube ends or Flex hoses are tight but do not cause damaging deformation. Package Includes 2 Pack universal muffler tip exhaust hook U-Bolt mild steel clips.

2 Exhaust Clamps get 2 durable 2.5 exhaust clamps in one package, no need to buy extras for replacements. Quality Galvanized Iron Material thicker more rust-resistant than standard clamps, with heat-resistant silver coating. Perfect 2.5 Od Fit specifically sized for 2.5-inch outer diameter pipes, ensuring leak-free sealing. No-Weld InstallationHeavy-duty U-bolt and saddle flange design installs in minute,no welding required just tighten the 38 nuts Creates a tight seal to prevent exhaust leaks and noise.. Beyond Exhaust Use also works for compressing hoses, Securing fence gates, Fixing gas exhaust tips.

STAINLESS STEEL MATERIAL - Are you looking for quality exhaust clamp Our 2.5 inches exhaust clamp is made of high-quality 304 stainless steel, which is strong, corrosion-resistant, anti-rust, with excellent durability and many years of service life.. EASY TO USE - The stainless steel exhaust clamp comes with flexible bolts and nuts, allowing you to install the product easily and quickly. The exhaust clamp is suitable for connecting exhaust pipes or mufflers with an outer diameter of 2.5 inches.. STRONG SEALING - The butt joint exhaust band clamp has a 360 degree even clamping force to prevent pipes deformation or leakage and provide the best sealing effect. The silver appearance makes it simple, stylish and modern, which can perfectly match any exhaust pipe.. WIDE RANGE OF APPLICATIONS - You will get 4 pack butt joint exhaust band clamp sleeves to meet your various needs. They can be widely used in exhaust pipes, mufflers, catalytic converters, downpipes, manifolds and so on.. GUARANTEE - Quality and customer satisfaction are our top priorities. If our exhaust clamps have any quality problems, please don't hesitate to contact us at any time. You have no risk, click Add to Cart.

HIGH-QUALITY MATERIAL - Made of premium 304 stainless steel, our exhaust clamp band sleeve has great corrosion resistance and not easy to rust. After many tests, they can give a good performance in the exhaust systems, and high quality in durability and reliability.. PERFECT SEALING CAPABILITY - These butt joint exhaust band clamps have been adopted high-strength fastening parts, providing the real leakage-free sealing capability. It is perfect for 2.5 inches exhaust pipes or mufflers.. 360 DEGREE FULL CLAMPING - Designed with an entire 360-degree full clamping area, the stainless steel exhaust clamp has an overall 360-degree clamping force without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system.. WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds.. MONEYBACK GUARANTEE - We promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to contact us, and we will make sure to provide the best service..

Size This narrow band clamp joins a 2.5-inch OD-ID slip-fit pipe. The width of the strap is 1.22 inches 31 mm.. Application The narrow band clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, catalytic converters and more.. Advantage The clamp features a no-welding design, making it easy to install or remove. It is recommended to apply exhaust sealant on the pipes before installation.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Feature The band clamp distributes force evenly at 360, providing a secure seal. The torque is 63 Nm..

SPECIFICATIONS Inner Diameter 2.5 inch Strap Width 1.22 inch 31mm Strap Thickness 1.8mmFits 2.5-inch OD straight pipe Not compatible with flaredexpanded pipes. PREMIUM MATERIAL Narrow Band Muffler Clamps are mainly made of high-quality 304 stainless steel, which is rust-proof, corrosion-resistant and waterproof.. WIDE APPLICATIONS This Narrow Band Muffler Clamp is engineered for a wide range of applications, providing a secure seal on exhaust pipes, mufflers, catalytic converters, and other critical components.. EASY NO-WELD INSTALLATION This exhaust clamp features a smooth surface design for quick and hassle-free setup. For an optimal seal, we recommend applying a specialized exhaust sealant to the pipe interface before installation.. WHAT YOU GET This package include 2pcs Narrow Band Muffler Clamps..

Material304 Stainless steel band, Zinc-Plated 716-14 bolt and nut, Steel gasket, Aluminum alloy I-block.. Advantage Ease of Installation This exhaust band clamp sleeve comes with fastening bolts. You only need to tighten or lose the bolts to connect or release. No welding required, easy to use.. Size Joins 2.5 OD pipe to 2.5 OD pipe, width of strap 3.0 inch 76.7mm.Confirm the size before buying. Application Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.system components such as pipes, mufflers, catalytic converters etc.. Features These exhaust clamps adopt an integrated structure, minimizing the complexity of the number of parts and maximizing material efficiency, thereby reducing weight. 12.9 degree high-strength fasteners provide true sealing force, and the unique reaction block provides 360 uniformly distributed tensile force, completing sealing around the connected exhaust components while preventing pipelined deformation.. Enhanced Sealing PerformanceOur exhaust pipe clamps, paired with high-quality sealant, ensure a tight fit after installation, preventing gas leaks and improving the overall performance of the exhaust system..

Material304 stainless steel band, zinc-plated M10.9 bolt and nut, steel gasket, aluminum alloy I-block.. Advantage Ease of Installation This exhaust band clamp sleeve comes with fastening bolts. You only need to tighten or lose the bolts to connect or release. No welding required, easy to use.. Size Joins OD pipe to ID pipe, width of strap 3.5 inch 88mm.Confirm the size before buying. Application Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.system components such as pipes, mufflers, catalytic converters etc.. Features These exhaust clamps adopt an integrated structure, minimizing the complexity of the number of parts and maximizing material efficiency, thereby reducing weight. 12.9 degree high-strength fasteners provide true sealing force, and the unique reaction block provides 360 uniformly distributed tensile force, completing sealing around the connected exhaust components while preventing pipelined deformation.. Enhanced Sealing PerformanceOur exhaust pipe clamps, paired with high-quality sealant, ensure a tight fit after installation, preventing gas leaks and improving the overall performance of the exhaust system..

PREMIUM MATERIAL Exhaust Clamps are mainly made of high-quality 304 stainless steel, which is rust-proof, corrosion-resistant and waterproof.. SPECIAL DESIGN Exhaust Clamp uses the 360-degree winding design, which can provide uniform force to the joints and prevent the deformation of the pipe connection.. SPECIFICATIONS ID 2.5 inch63.5mm OD 2 58 inch 66.7mm Thickness0.5mm Width of strap74mm Joins 2.5 OD pipe to 2.5 ID pipe.. WIDE APPLICATION The exhaust clamp can be used in many scenarios, such as exhaust pipes, mufflers, catalytic converters etc.. MULTIPLE CHOICES We have a wide range of Exhaust Clamps in different sizes to choose from 2.5 3..

PREMIUM MATERIAL Exhaust Clamps are mainly made of high-quality 304 stainless steel, which is rust-proof, corrosion-resistant and waterproof.. SPECIAL DESIGN Exhaust Clamp uses the 360-degree winding design, which can provide uniform force to the joints and prevent the deformation of the pipe connection.. SPECIFICATIONS ID 2.5 inch63mm Thickness0.5mm Width of strap75mm.Fits 2.5inch OD straight pipe Not compatible with flaredexpanded pipes. WIDE APPLICATION The exhaust clamp can be used in many scenarios, such as exhaust pipes, mufflers, catalytic converters etc.. MULTIPLE CHOICES We have a wide range of Exhaust Clamps in different sizes to choose from2.5 3..

ouyanglong exhaust clamp fits for 2.5 inch OD Pipe.. Exhaust clamp perfect for mufflers, pipes, catalytic converters, headers manifolds etc.. 2 12 inch Exhaust clamp are made from high quality 304 Stainless Steel and plating zinc. Durable Anti-rust.. I-Block design of the exhaust band clamp distributes 360 forces evenly, providing a seal and preventing material deformation.. Lap joint clamp have a no-weld design, easy to install or remove..

Size This narrow band clamp joins a 2.5-inch OD-ID slip-fit pipe. The width of the strap is 1.22 inches 31 mm. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Feature The band clamp distributes force evenly at 360, providing a secure seal. The torque is 63 Nm.. Advantage The clamp features a no-welding design, making it easy to install or remove. It is recommended to apply exhaust sealant on the pipes before installation.. Application The narrow band clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, catalytic converters and more..

Size Our 2.5 exhaust clamp joins 2.5 OD to 2.5 ID pipe Strap Width 2.94inch74.82mm, Torque 63 Nm. Advantage Easy to install and remove without welding. Application Lap joint clamp simply and effectively connects exhaust system components, such as mufflers, pipes, catalytic converters, etc. Material 304 stainless steel band Zinc-plated M10 bolt and nut Steel gasket, Aluminum alloy I-block. Feature Making the force of 360 evenly distributed, the band clamp provides a seal and prevents material deformation.

Wide Compatibility Ideal for exhaust system repairs works with mufflers, catalytic converters, exhaust tips, manifolds, resonators, flex pipes, and more. Functions as a muffler clamp or narrow strap clamp for pipe joints.. Versatile Sizes Fits 2.5 OD and 3 OD pipes plus other options for versatile use. 1 pieces per package save time and cost. Measure your pipe before buying to ensure a perfect fit.. Secure Seal Durable Features a mild steel semi-circular gasket and I-shape block for tight, leak-free clamping distributes force evenly 360 to prevent distortion. 304 stainless steel with galvanizing resists rust.. Easy to Install Flexible bolt-nut design for quick installationremoval. Adjustable, strength-tested, and reusable without damaging pipes.. After Sale If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays..

STURDY Our u-clamps are made of metal with excellent workmanship, smooth surface and corrosion resistance. U-bolt saddle design can reliably fix and connect the equipment. FEATURESSaddle Style clamps are designed without welding, flexible, can be quickly disassembled and reused. Muffler Exhaust Clamps have good sealing, which can effectively prevent exhaust gas and noise leakage, and will not cause damage or deformation to the pipe tip. INSTALLATION U Bolt Clamp on Tip Pipes Connection is easy to install, just insert and tighten the nuts at both ends, note that in the process of installation can be back and forth alternately twisted bolts, so as to ensure uniform tightening of the two ends of the force balance. APPLICATIONS Universal muffler tailpipe hook, can be used for sealing muffler inletoutlet, elbow joints, piping, maintenance exhaust systems. SIZE U-clamps is 2.5 ID, suitable for 2-12 inches OD pipe. Please measure the size of your equipment and choose the right U-clamp before placing an order. YOU WILL GET 2 x 2.5 inch U-Bolt Clamps, after receiving the U-clamps, if you need any help during use, we will be happy to assist you.

Package includes1 x turbo exhaust clamp. Need professional installation, no instructions is included.. Fits for 2.5 ID tube, perfect for catback, exhaust, mufflers and downpipes.. Please check size in picture before ordering.. Please allow 0.5-1 inch difference due to manual measurement..

Size This lap joint clamp joins a 2.5 OD pipe to a 2.5 ID pipe. The width of the strap is 2.94 inches 74.82 mm. Please accurately measure the outer diameter of the pipe before placing an order.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Advantage The clamp features a no-welding design, making it easy to install or remove.. Feature The band clamp distributes force evenly at 360, providing a secure seal and preventing material deformation. The recommended torque is 63 Nm. Application The lap joint clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, and catalytic converters, and more..

Universal Exhaust System Compatibility This exhaust band clamp serves as a versatile solution for connecting heavy-duty exhaust components, including catalytic converters, exhaust nozzles, manifolds, resonators, flexible pipes, and mufflers. Ideal for repair or upgrade projects, it seamlessly integrates with various exhaust systems, eliminating the need for multiple specialized clamps.. 360 Leak-Proof Sealing Design The exhaust clamp is engineered with a mild steel semicircular gasket and an I-shaped block, this stainless steel muffler seal ensures uniform 360 clamping force distribution. It tightly secures pipes to prevent leaks, control material deformation, and maintain optimal exhaust flowcritical for performance and emission compliance.. Tool-Free Reusable Installation Featuring a flexible bolt-and-nut structure, this adjustable exhaust clamp allows easy removal and reinstallation without damaging pipes. No professional tools required simply tighten the bolts to achieve a secure fit. Its reusable design makes it perfect for temporary fixes or permanent installations.. Enhanced Seal Tip For superior sealingespecially on slightly out-of-round pipeswe recommend wrapping the clamping surface with multiple layers of aluminum tape. This pro tip fills micro-gaps, further preventing leaks and ensuring a professional-grade seal that withstands extreme temperatures and vibrations.. Wide Application This product is not vehicle-specific and works with a wide range of applications. Please review the product specifications and confirm compatibility before placing your order. No instructions are includedprofessional installation is highly recommended for optimal use. We stand behind our product quality..

Size This lap joint clamp joins a 2.5 OD pipe to a 2.5 ID pipe. The width of the strap is 2.94 inches 74.82 mm. Please accurately measure the outer diameter of the pipe before placing an order.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Advantage The clamp features a no-welding design, making it easy to install or remove.. Feature The band clamp distributes force evenly at 360, providing a secure seal and preventing material deformation. The recommended torque is 63 Nm.. Application The lap joint clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, and catalytic converters, and more..

Premium MaterialU-Bolt Muffler Exhaust Clamp is made of high-quality galvanized iron with polished surface that is light weight, heat-resisting,durable, wear-resistant, and corrosion-resistant, ensuring long-lasting use.. Package SpecificationThe package comes with 2pcs heavy duty U-bolt clamp fits for 2-12'' OD exhaust pipessaddle flange and 12 inch nuts. Exquisite Surface Treatment U-Bolt muffler exhaust clamp has clear thread, smooth and flat section without burr, easy twisting of hexagonal nuts and easy installation. FunctionU bolt exhaust seal band clamp has superior sealing property to prevent exhaust gas and noise leakage Able to secure the pipe without damaging or deforming the pipe end or hose.. Thicken Card SlotThe card slot of U-Bolt muffler exhaust clamp has been thickened treatment,the hardness is higher and the hardness is not deformed.

Joins 2.5 inch OD pipe to 2.5 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque 63 Nm. Package 2pcs.. Connection Type ID-OD slip fit connection with either straight or Z compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely.. Distributes the clamping force evenly over the entire 360 to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable.. Easy to handle and disassemble. Suggestion Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal.. EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

Precise 2.5-Inch Fit Universal ApplicationThis 2.5 exhaust clamp is engineered to seal standard 2.5 OD exhaust pipes. It serves as a versatile tailpipe clamp 2.5 and 2.5 muffler clamp, perfect for connecting pipes, mufflers, and catalytic converters without welding.. Durable 304 Stainless Steel ConstructionMade with a high-quality 304 stainless steel band, this exhaust band clamp resists rust, corrosion, and high heat. It ensures a long-lasting, reliable hold on your exhaust pipe in all conditions.. No-Weld, Tool-Friendly InstallationThe no-welding design makes this narrow band muffler clamp stainless steel for pipes easy to install or remove with basic tools. For an optimal seal, apply exhaust sealant to the pipe before tightening the pre-attached hardware.. 360-Degree Uniform Sealing ForceThis exhaust clamp features a band that distributes pressure evenly around the entire joint. The 360 seal prevents leaks and reduces noise, providing a more secure connection than standard clamps.. Complete 2-Piece Value PackGet everything you need with this practical 2-pack. It offers great value, ensuring you have a spare exhaust band clamp on hand for current repairs or future projects on your vehicle's exhaust system..

Product Size 2.5 Inch exhaust clampsreducer design,Joins 2.5 OD Pipe to 2.5 ID Pipethickness of the pipe are 2mm. Overall width of the strap is 3 inch. Please accurately measure the outer diameter of the pipe before placing an order.. Material Premium T304 stainless steel band,American standard high strength 8 Degree10.9 Bolts ensure the locking strengthDouble stack self-locking lock washers and nut, carbon steel gasket, aluminum alloy I-block.. No welding design, easy to install or remove. The way it wraps around the exhaust pip ensure there is no leak or twist. Also the exclusive reaction block provides 360equal distribution of stretching forces, prohibiting pipe distortion while completing a seal around the joined exhaust components.. Durable and Anti-rust Tested to 100 hours salt spray. Anti-corrosion and long time service. The exhaust band clamp can be applied for a connection to exhaust pipes, mufflers, Pipes connections. Different clamp has different application and features, find the one that suit your needs most.. Package includes 2 pieces 2.5 inch lap joint exhaust clamps..

Size joins 2.5 OD pipe to 2.5 OD pipe, width of strap 3inch 76.7mm.. Application Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.. Advantage No welding design, easy to install or remove.. Material 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. Feature The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque 63 Nm..

Size Joins malefemale flange 2.5 ID to 2.5 OD pipe. T-Bolt thread size M81.25.. Advantage V-band clamp is easy to install and remove. The male and female flanges can be connected more stable, and provide a good seal with uniform pressure at the flange.. Feature Male and female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation.. Material 304 Stainless steel clamp and flanges,mild steel T-Bolt 304 stainless steel for long durability and reliability, corrosion resistance and high-temperature resistance.. Application Compatible for exhaust system, turbocharger, downpipe, muffler etc..

HIGH QUALITY ---- Our 2.5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water. Universal fitment.Joins Joins 2.5 OD Pipe to 2.5 ID Pipe, made of 304 stainless steel. Besides, we also provide 4 different sizes to fulfill your needs. You would better measure before pruchase. These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Easy to installButt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. NOTE Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service.

Product sizeThe size of V Band Clamp is bigger than 2.5 inch. The inner diameter of malefemale flange is 2.5 inch fit for 2.5 OD pipe.. Premium material V Band Clamp is made of high-quality 304 stainless steel, which is rust-proof, corrosion-resistant and waterproof.. Wide application V Band Clamp and Flanges are widely used in the pipe connection of exhaust pipes, pumps, diesel engines, turbochargers, mufflers, air ducts, intercoolers and other equipment.. How to use Step 1 Polishing the incision of the steel pipe Step 2 Weld after inserting the male and female flanges at the incisions at both ends Step 3 Tighten the screws after installing the V Band Clamp on the flange.. What you get2.5 inch v band clamp Male Flange Female Flange..

Package Includes you will receive 4 pieces of 2.5 inch exhaust clamp These clamps provide a practical and efficient way of connecting exhaust pipes, mufflers, and more A good attribute to consider for those in need of a tool that will secure and seal their car components. Proper Dimension these exhaust clamps are approx. 2.5 inches in diameter, 3 inches in width, which can be applied to connect a pipe with an outer diameter of 2.5 to a pipe with an outer diameter of 2.5, the clamps offer good sealing and prevent material deformation. Quality Materials our 2.5 inch exhaust band clamp is made of 304 stainless steel and zinc plating A desirable feature for those seeking clamps that resist corrosion and rust brought about by water interaction. Simple Installation the butt joint band clamp is designed to hold the pipe securely in a 360 degree arc, providing a uniform force without leakages The 2 12 inch exhaust clamp is easy to install, no welding required Just fit them onto your pipe, tighten, and you're good to go It is recommended that put exhaust sealant on the pipes before installation. Wide Range of Application the exhaust clamps are versatile tools for industries and applications, whether you're looking to hold exhaust pipes, mufflers, or other exhaust system components, these clamps deliver enhanced functionality and are practical tools in your toolkit.

DOUBLE-LAYER DESIAGN The double-layer design adds extra durability and help reduce exhaust leaks, great choice for a reliable connection . SIZE Width of strap 3.47inch 88mm, Inner diameter 2.5 inch, universal fit for 2.5 inch OD pipe. PREMIUM MATERIAL 304 Stainless steel band, zinc-plated M10.9 bolt and nut, steel gasket, aluminum alloy I-block, make the exhaust band clamps work great. EASY TO INSTALL The exhaust clamp is designed with a bolt and nut construction, no welding required, easy to install or remove. APPLICATION The exhaust pipe clamps effectively connect catalytic converters, exhaust ports, exhaust manifolds, exhaust resonators, exhaust flex pipes, and exhaust muffler repair. Its a solid choice for anyone needing a reliable, durable solution for exhaust systems.

Flexibility2.5 Butt joint exhaust clamp,Joins 2.5 OD pipe to 2.5 OD pipe, Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Butt joint clamp 2.5,Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.. 2.5 Inch butt joint exhaust clampButt-joint clamps are a good choice when cosmetic appearance is important. This type of clamp is for connecting two pipes that have the same outside diameter.. Easy To InstallStainless Steel Butt Joint Exhaust Band Clamp-Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware.The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint.. Package Includes Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2.5 Inch,2Pcs.2.5 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel.Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion.. Clamp material Stainless Steel. 2.5 inch 2 12 butt joint exhaust band clamp,Perfect for Catback Exhausts, Mufflers, Downpipes, Headers, Manifolds.The items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers.

Inside diameter 2.5 exhaust clamp.. Suitable for 2.5 exhaust pipe, muffler, and catalytic converters connection.. Stainless steel clamp with great performance in anti-corrosion.. Prevent leaks and control material distortion.. Durable installation without damage to pipe ends or flex hose..

Wild application, great for exhaust pipe, manifold, flex pipe, catalytic converter, muffler, resonator, tips, tailpipe. Stainless steel exhaust clamp for a long life, corrosion and water resistant.. Tightly Clamped, no damage to pipes. Easy to remove and install.. High-quality products and best customer service..

HIGH QUALITY ---- Our 2.5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water.. Universal fitment.Joins Joins 2.5 OD Pipe to 2.5 ID Pipe, made of 304 stainless steel. Besides, we also provide 4 different sizes to fulfill your needs. You would better measure before pruchase.. These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.. Easy to installButt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.. NOTE Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service .

Durable material These exhaust clamps made of premium stainless steel for long service life, anti-corrosion, clean and bright apperance. Due to the light and screen difference, the item's color may be slightly different from the pictures.. Suitable Size 2 inch ID 250.8mm, overall length 3.7395mm 2.5 inch ID2.563.5mm,overall length 3.7395mm.2 sizes for your option. Please measure before purchasing.. Application The muffler exhaust clamp?suitable for exhaust system, muffler and catalytic converters.. Easy to install and use This type of stainless steel muffler clamp is much easier to separate without distorting your exhaust components,allowing the flexibility to disassemble for service. Superior sealing capability prevent exhaust gas and noise from leaking.. Please Notice The gap between 123-18 inches is normal, this exhaust clamp is adjustable with a large wrench by rotating the screws at both ends to accommodate the inability to truly tight fit. If the gap is too large or any problem, please feel free to contact us, thank you..

Walker offers a variety of clamp styles and sizes for your installation needs. Helps to ensure a leak-free connection. Constructed from durable and robust material for long life. New Walker accessories help to ensure effective exhaust repairs.

Walker offers a variety of clamp styles and sizes for your installation needs. Helps to ensure a leak-free connection. Constructed from durable and robust material for long life. New Walker accessories help to ensure effective exhaust repairs. Walker supplies all of the accessories you need to do the complete exhaust job.