PERFECT FIT FOR 2.5 OD-ID SLIP FIT CONNECTIONS - ROADFORMER 2.5 inch exhaust clamp is designed to connect 2.5 OD pipe into 2.5 ID pipe for exhaust pipe, muffler inlet, muffler outlet, elbow joint, catalytic converter, and exhaust system repair applications. STAINLESS STEEL NARROW BAND CLAMP - Made with a stainless steel band for strength, corrosion resistance, and long service life. The narrow band design provides a clean, compact fit while delivering strong sealing performance on exhaust connections. 360 CLAMPING WITHOUT PIPE DAMAGE - Roadformer Reaction Block Technology helps distribute clamping force evenly around the pipe, creating a secure seal while reducing the risk of pipe distortion, crushing, or damage to exhaust pipe ends. STRONG 10.9 GRADE BOLT FOR SECURE SEALING - Built with a 10.9 grade bolt to provide high clamping force for a tight, serviceable exhaust joint. Recommended working torque 4050 ft-lbs. For best sealing results, exhaust sealant may be applied before installation. EASY NO-WELD INSTALLATION, 2 PACK VALUE - Pre-attached hardware makes installation fast, accurate, and removable. No welding required. Each pack includes 2 pieces of 2.5 inch narrow band exhaust clamps for repair, replacement, and custom exhaust work.

Size Fit for EVIL ENERGY 2.5 inch Flange. Not including flanges. Advantage V band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange. Material Stainless steel clamp. chromium-molybdenum steel T bolt. Long durability and reliability, corrosion resistance, and high temperature resistance. T-bolt Thread size M81.25 Lenght 2.63inch. Application Compatible for exhaust system, turbocharger, downpipe, muffler etc.

Size Joins malefemale flange 2.5 ID to 2.5 OD pipe. T-Bolt thread size M81.25.. Advantage V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange.. Feature Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation.. Material Stainless steel clamp and flanges, mild steel T-Bolt 304 stainless steel for long durability and reliability, corrosion resistance and high-temperature resistance.. Application Compatible for exhaust system, turbocharger, downpipe, muffler etc..

Size Our 2.5 exhaust clamp joins 2.5 OD to 2.5 OD pipe Width of strap 3inch76.2mm Torque 63 Nm. Advantage The 2.5 inch exhaust clamp is easy to install and remove without welding. Application The exhaust clamp is a butt joint clamp simply and effectively connects exhaust system components, such as mufflers, pipes, catalytic converters, etc. Material 304 stainless steel band Zinc-plated M10 bolt and nut Steel gasket, Aluminum alloy I-block. Feature Making the force of 360 evenly distributed, the band clamp provides a seal and prevents material deformation.

This Exhaust Clamp Is Made In 304 Stainless Steel. 2 Pieces Included In A Single Pack.. Advantages 2.5 Exhaust Clamp, No Welding Design, Easy Installation And Disassembly. It Is Recommended That Exhaust Sealant Be Applied To Pipes Before Installation.. Application Exhaust Narrow Band Clamps Are A Simple And Effective Way To Connect Exhaust System Components, Such As Pipes, Mufflers, Catalytic Converters, Etc.. Features 2.5 inch Exhaust Clamp With Clamps For 360 Degree Force Distribution, Providing A Seal.. Enjoy Warranty You Will Get Quality Products, If You Have Any Questions, Please Contact Us, We Are Always Waiting For You Here..

Pay Attention Please measure the pipe's outer and Inner diameter before purchase. Our exhaust clamp joins 2.5In63.5mm - 0.2mm OD pipe to 2.5 ID pipe, width of strap3 inches76 mm. The thickness of the strap is approximately 0.25.08mm. Durable 304 Stainless Steel The exhaust pipe clamp is constructed from high-grade 304 stainless steel with a zinc-plated bolt for maximum corrosion resistance. This material offers reliable performance under extreme heat and harsh conditions, protecting your exhaust system with long-lasting strength. Advanced Leak-Proof Seal Our exhaust coupler I-block design creates 360-degree force distribution for a complete, rounded seal. This technology provides superior containment compared to standard U-clamps, preventing exhaust leaks and maintaining system integrity. Quick-Install Design The muffler clamps, Pre-threaded hardware and a no-weld design allow for straightforward installation and removal. The dual-bolt system resists loosening from vibration, enabling a secure connection that simplifies maintenance and service. Universal Exhaust Application The exhaust band clamp is Ideal for connecting pipes, mufflers, elbows, and catalytic converters. Suitable for automotive, performance, and industrial systems, this clamp offers a versatile solution for both repair projects and custom exhaust assemblies.

Premium 304 Stainless Steel SKYMIRO 2.5 inch exhaust clamp is made from true 304 stainless steel with an electroplated finish for superior resistance to rust, corrosion, moisture, and high temperatures. Maintains its polished look and strength even in harsh driving conditions. Precision 2.5 Fit Our 2.5 muffler clamp is designed for 2.5-inch outer diameter exhaust pipes. Ideal for connecting mufflers, exhaust tips, converters, elbows, and pipe joints. Please measure your pipe OD before ordering for a precise fit. 360 Leak-Resistant Seal Heavy-duty U-bolt and saddle design applies uniform clamping force for a secure connection that helps reduce exhaust leaks, vibration, and unwanted noise. For best sealing, use two clamps in opposite directions. Heavy-Duty Built to Last Our exhaust pipe clamp features reinforced construction and 304 high-strength screws that resist stripping, loosening, and deformation. Stronger and more reliable than galvanized clamps with ordinary hardware. Easy Installation Wide Use No welding requiredsimply tighten the bolts for a fast and secure installation. Removable and reusable for maintenance. The exhaust clamps include 2 clamps for exhaust systems, mufflers, catalytic converters, and pipes.

APPLICATION fits for 2.5 ID v-band flanges that have a 3 18 flange OD. Fits for 2.5 inch OD pipes.. FUNCTION this t-bolt v band clamp makes it easy to install and remove inter-cooler systems and turbo parts, such as charge piping, intake pipes, etc. Perfect for applications requiring frequent removal.. GREAT VALUE this package includes 2 clamps. The price of each clamp is much lower than the market price. Save your money. HIGH QUALITY this v band clamp is made of 304 stainless steel for long durability and reliability, corrosion resistance, and high temperature resistance.. WARRANTY one-year warranty. We provide free service of replacement or refund, you can buy it with confidence. If you have any questions about our product, please contact us through email at any time..

Fits 2.5 OD Exhaust Pipes The exhaust clamp securely connects two exhaust pipesone with a 2.5-inch outer diameter and one with a slightly smaller sizeensuring a tight seal for muffler inlets and outlets, elbows, and coupling pipes.. Durable 304 Stainless Steel Construction Made from premium 304 stainless steel, this U clamp has a passivated surface, making it resistant to heat, corrosion, and wear for long-term performance in harsh environments.. Reinforced and Secure Connection Evil Energy's U-bolt clamp has a thickened slot, which is much stronger and less prone to deformation, while the high-strength stainless steel nuts with anti-slip teeth ensure a tight, vibration-resistant hold and prevent the nuts from loosening.. Easy Installation, No Welding Our U muffler clamp features precision-machined threaded rods for fast and secure installation, and it is fully detachable and reusable for convenient maintenance or adjustments.. Complete Installation Kit Included Comes with 4 x heavy-duty U-bolts for 2.5-inch OD exhaust pipes, 4 x saddles, 8 x 38-inch nuts, and 1 x wrench, ready for quick and effortless installation..

Roadformer 2.5 exhaust clamp is to joint 2.5 OD pipe overlapping into 2.5 ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry.. This stepped 2.5 inch exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force. Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections. Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability. Roadformer exhaust clamps is dedicated in providing real value to our customers and end users. We set industry quality standard.

Stainless Steel Construction each package includes 4 robust muffler clamps Crafted from 304 stainless steel to provide nice corrosion resistance, long service life, and dependable performance under high-temperature conditions. Direct-fit Replacement Design designed for precise compatibility with select vehicle models, allowing straightforward installation without cutting or welding Matches original mounting positions. Precise Dimensions for Proper Fitment our 2.5 inch muffler clamps are specifically designed to fit 2.5 inch outer diameter muffler pipes Overall length and diameter are engineered to meet factory specifications Please refer to the product images and size chart to confirm compatibility before purchase. Optimized Flow Performance smooth internal structure supports stable airflow, helping maintain consistent engine operation and efficient performance during daily driving. Heat Impact Resistant Build built to withstand extreme heat and harsh road conditions, reducing the risk of deformation, cracking, or premature wear over time.

Size joint 2.5 inch OD pipe slip fit into ID pipe for connection. Width of strap 1.22 inch31mm. Perfect fit in clamping OD 2-12 inch pipe.. Material T304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.. Feature The narrow band clamp adds semi-circular gasket parts, it can hold the pipe tightly without loose. Unique seal and high clamp loads are provided, the band clamps make the force of 360 evenly distributed to provide a seal.. Application Narrow exhaust band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and Pipess. Different clamp has different application and features, find the one that suit your needs most.. Durable Pre-attached I block with high strength 10.9 Grade bolts provide best durability for your works..

Clamp Size This is a 2.5 in T-bolt hose clamp with an adjustable working range of 2.482.8 in 63 mm to 71 mm. Width 0.75 in 19 mm. Thickness 0.6 mm 0.024 in. Bolt thread size M682 mm 3.23 in.. 304 Stainless Steel Crafted from high-quality 304 stainless steel, these clamps offer exceptional resistance to rust, corrosion, salt, water, oil, acid, and extreme temperatures. Their polished finish ensures long-lasting durability and reliable performance in even the harshest environments.. Flap Design Stainless steel T-bolt clamps with rounded edges are designed for leak-free connections. The rounded edges of the band not only prevent sharp edges from cutting the pipe, but also enhance the overall durability and stability of the clamps.. Versatile Applications T-bolt clamps hose clamps, suitable for a wide range of industrial, automotive and professional equipment applications, can reliably fix various oil, water and gas hoses and all kinds of hose connections to ensure the solidity and sealing of the connection.. Warm Tips Before purchasing, ensure your hose's outside diameter falls within the 2.48-2.8 in 63 mm-71 mm range. These clamps are designed for durability and ease of use, making them a practical solution for both everyday and demanding applications..

APPLICATION the malefemale flange is 2.5 inch fit for 2.5 OD pipe. Clamp size will be bigger than 2.5 inch, make sure the size right. This assembly makes it easy to install and remove intercooler systems and turbo parts, such as charge piping, intake pipes, etc.. QUICK RELEASE DESIGN this design is ideal for applications that require frequent removal. It can be connected and disconnected faster while providing a leak-free seal with even pressure at the flange.. GREAT VALUE this package includes 2 clamp flange assembles. The price of each assembly is much lower than the market price. Save your money. HIGH QUALITY this assembly is made of 304 stainless steel for long durability and reliability, corrosion resistance, and high temperature resistance.. WARRANTY one-year warranty. We provide free service of replacement or refund, you can buy it with confidence. If you have any questions about our product, please contact us through email at any time..

Material304 Stainless steel band, Zinc-Plated 716-14 bolt and nut, Steel gasket, Aluminum alloy I-block.. Advantage Ease of Installation This exhaust band clamp sleeve comes with fastening bolts. You only need to tighten or lose the bolts to connect or release. No welding required, easy to use.. Size Joins OD pipe to ID pipe, width of strap 2.94 inch 74.82mm.Confirm the size before buying. Application Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.system components such as pipes, mufflers, catalytic converters etc.. Features These exhaust clamps adopt an integrated structure, minimizing the complexity of the number of parts and maximizing material efficiency, thereby reducing weight. 12.9 degree high-strength fasteners provide true sealing force, and the unique reaction block provides 360 uniformly distributed tensile force, completing sealing around the connected exhaust components while preventing pipelined deformation.. Enhanced Sealing PerformanceOur exhaust pipe clamps, paired with high-quality sealant, ensure a tight fit after installation, preventing gas leaks and improving the overall performance of the exhaust system..

Size Details Exhaust clamp ID 2.5 inch, Exhaust hanger Rod 7 inch5.5 of Thread. M10 thick and strong rod hanger with 38 screw nuts provide a durable way to securely mount your exhaust system.. Material T201 stainless steel exhaust clamp with exhaust hanger rod. Stainless steel material ensure you can use this exhaust clamp hanger for longer life. Wear-resistant and corrosion-resistant. Please note, even T201 stainless will have a little magnetic reaction, but it is more durable and anti-rust during use.. Fitment Universal fitment. Perfect to hold 2 12 inch exhaust pipe and adjust hanger to desired length. You can cut off excess portion of hanger if need be.. Installation Bolt-onClamp on. Easy for anyone who has the issue of exhaust pipe wobbling.Just make sure the size of the clamp you may need. This heavy duty exhaust hanger is built to last under high exhaust temperatures.. Package includes two pieces 2-12 inch exhaust clamps. Also we have multi kinds of exhaust hangers, please choose the one that fits your application most..

Flanges ID 2.5 inch. Package includes 4 X V band Clamp, 8 X V band flangesMaleFemale. Great for racers and tuners, these clamps make it easy to remove parts to gain access to vital components easily as there are no hard hard to reach bolts or special tools needed. Simply undo the clamp and you can remove the component easily.. Professional installation is highly recommended.

SizeID 2.5 exhaust u clamp, fits for 2.5 2-12 inch OD pipe.. MaterialHigh quality T201 Stainless Steel. Thick thread rod and strong saddle bracket ensure its sturdy and strong. Our exhaust u-bolt clamp will not break or deform during use.. Heavy DutyThe SS heavy duty muffer clamp with reinforced ribs on the saddle flange, expertly crafted and durable construction for long service. The high quality and craftmanship of the heavy duty clamp can resist corrosion and out of shape during use.. SimpleRemovableReusableNo Welding Design makes the clamp can be installed by a faster and eaiser way. For anyone, it is so simple to make a fixing or repairing job. This u bolt clamp can be used for fixing various pipes, and also it can be used in other applications. Easy to installremovalreuse.. Anti-Rust and DurableThis muffler u bolt clamp has been sold in the market for many years and tested by customers for its durability and anti-rust. For customer needs, we are now launching a two-pieces set and offering more size options. Hassel-free shopping with us..

Material Our u-bolt clamp is made of high quality stainless steel, polished stainless steel surface, light weight, heat and corrosion resistant, durable. Size 2.5 inside diameter u-bolt exhaust clamp, fits for 2.5 Outer Diameter OD Pipe. Stainless Clamp The stainless steel heavy duty u-bolt clamp is consisted of u-bolt, saddle flange and two nuts. Easy to Use U-bolt muffler exhaust clamps with No welding design are easy and fast to install. Removable and Reusable. Package Include 2 Pieces heavy duty u-bolt exhaust saddle style clamp.

Size 2.5 inch inner diameter 63-68mm, suitable for 2.5 outer diameter pipe.. MaterialU Bolt Clamps made of high-quality stainless steel, corrosion-resistant and not easily deformed.. Function Widely used, suitable for muffler inlet and outlet, exhaust pipe inlet, elbow and pipe sealing, etc.. Easy to install The exhaust clamp is installed with bolts, no welding is required, and the installation is simple and quick..

High QualityThis Butt Joint Band Clamp is made of 304 stainless steel for long durability and reliability, zinc-plated M10 flange bolt and nut, steel gasket, and aluminum alloy I-block.. FunctionThe exhaust clamp can be applied for a connection to exhaust pipes, mufflers, catalytic converter connections, and etc. It can hold the pipe tightly without loosening. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service.. SizeJoins 2.5 OD pipe to 2.5 OD pipe, width of strap 3inch 76.2mm. Package includes 2 PCS Exhaust Clamps.. ApplicationSeal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, and Exhaust Muffler Repair Projects.. Easy to InstallYou just need to tighten or lose the bolts to do connection or releasing. No other welding is needed. The clamps have been tested for strength and are reusable without damaging the pipes.. Service100 satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Size Joins 2.5 OD pipe to 2.5 OD pipe, width of strap 3inch 76.2mm.. Application Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair.. Advantages No welding design, easy to install or remove.. Material 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.. Feature The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque 63 Nm..

Practical 3-Pack Bundle This value bundle includes 3 pieces of 2-12 inch 65mm heavy-duty U-bolt exhaust clamps, perfect for most standard repair jobs on a single vehicle or for mechanics to use on multiple projects. Durable Corrosion-Resistant Forged from high-quality galvanized carbon steel, this clamp is built to withstand high temperatures and resist corrosion, providing a secure, long-term solution for your exhaust system needs. Accurate 2.5-Inch OD Fit Designed with a 2-12 inch 65mm inner diameter, this clamp is the perfect match for pipes with a 2.5-inch outer diameter. Always confirm your pipe's OD before purchasing to ensure a snug and secure fit. Reinforced Saddle Flange Design The saddle flange is reinforced for extra strength, distributing pressure evenly and creating a 360-degree seal that prevents leaks and withstands vibration from diesel or gas engines. Professional-Grade Solution A trusted choice for professional diesel and gas exhaust repairs, reattaching exhaust tips, and sealing pipe joints. Essential for garages, fleet maintenance, and serious car enthusiasts.

HEAVY-DUTY MATERIAL - The joint exhaust muffler clamps are made of high-quality 304 stainless steel and well polished with a smooth and beautiful finish surface. You don't need to worry about them being rusty, corroded or cracked, which is durable, removable and reusable.. FEW MINUTES ASSEMBLY - Compose of flexible bolts, nuts and I-block, you can quickly and accurately complete the installation of butt joint exhaust clamp in a few minutes without welding. They are universal metal exhaust clamps that fit 2.5-inch OD pipes to 2.5-inch OD pipes.. GREAT VALUE PACK - Packages include 4 packs of stainless steel exhaust clamp, each has a length of 3 inches and inside diameter of 2.5 inches, which fits perfectly exhaust pipes, mufflers, manifolds, catalytic converters with an outer diameter of 2.5 inches.. WELL SEALED AND WIDELY USED - Our exhaust band clamp sleeve can provide a 360 even distribution of stretching forces to prevent leaks and material distortion while completing a good seal around the joined exhaust parts. Great for exhaust pipes, mufflers, catalytic converters, downpipes, manifolds and more.. NICE AFTER-SALES - We guarantee to provide you with a trustworthy refund service within 30 days. Please feel free to contact us if you have any dissatisfaction or improvement problems about exhaust clamps 2.5 inch, and we will reply to you as soon as possible within 24 hours..

HIGH QUALITY V-band clamp and flanges is made of 304 stainless steel for long durability and reliability, Corrosion resistance, high temperature resistance. They work very well in operating conditions involving stress, vibration and extreme temperature fluctuations. APPLICATION V-Band Clamps makes it easy to install and remove. EASY INSTALLATION No special tools needed, Simply removing a single nut and you can remove the component easily. PACKAGE INCLUDED 2 x Stainless Steel V-band clamp 4 x Stainless Steel MaleFemale Flanges, Same as the pictures. Upgraded bolt, high strength and not easy to break.

ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time.. EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing.. TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers.. PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches.. SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..

Size ID 2.5 inch clamp, joins 2.5 OD-ID slip fit pipe. Width of strap 1.22 inch 31mm. Thickness of strap aprox 1.89mm.. Material Premium T-304 stainless steel band to ensure durability corrosion resistance, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.. Easy to Install No welding design, pre-attached hardware for fast and accurate installation, or remove.. Application An effective way to connect most exhaust system components, aslo can be used for muffler repair or catalytic converters.. No Damage to Pipe Unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal..

Premium 304 Stainless Steel Exhaust ClampsOur 2.5 inch exhaust clamp is made of high-grade 304 stainless steel, the muffler band clamps offer exceptional corrosion resistance, rust prevention and superior durability, ensuring long-lasting durability and reliability even in harsh environments and extreme temperatures.With its outstanding durability, the muffler clamp provides long-lasting reliability for vehicle's exhaust system, effectively reducing maintenance costs and replacement frequency.. Superior Sealing Performance Sealing is where this clamp truly excels. The innovative I-shaped aluminum alloy block evenly distributes clamping force, creating a 360 secure, leak-proof connection. Unlike traditional clamps, its full clamping area design seals the entire connection without distorting pipes or tubing. With two pre-threaded nut rods, it remains firmly in place,unaffected by internal forces or vibrations.It's the ultimate choice for reliable, efficient exhaust system connections.. Easy to InstallWith user-friendly design, joint band clamps can be quickly installed using standard tools. Before starting to tighten, partially screw the two bolts into the gasket and gradually alternate tightening between the two bolts to ensure even pressure distribution, prevent deformation, and ensure a leak free seal between the pipe clamp and the pipe wall. Its modular structure allows for easy disassembly during maintenance or system upgrades without damaging the connected pipes.. Wide ApplicationOur lap joint exhaust band clamp 2.5 inch is a simple and effective method for connecting exhaust system components, suitable for connecting mufflers, catalytic converters, exhaust pipes, cat back systems, racing exhausts, display vehicles and turbo downpipes, making it a must-have for maintenance, upgrades, and customization. In the fields of automotive modification, industrial exhaust systems, and marine engines, joint exhaust pipe muffler clamp plays a crucial role.. Package Included2pcs exhaust clamps 2.5 inch, including 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, and aluminum alloy I-block. 2 12 lap joint exhaust clamp joins 2.5 OD pipe to 2.5 ID pipe. Our exhaust pipe repair clamp combines excellent quality and precision engineering to ensure precise dimensions and robust lap joints, providing a secure and leak-free seal that can withstand the test of time. Please measure the pipe outer and inner diameters before purchase..

SECURE 2.5 OD FITMENT HEAT RESISTANT Precision-engineered to clamp tightly around 2.5 OD Outer Diameter pipe connections. We use industrial-grade steel treated to withstand extreme exhaust heat without warping, ensuring a leak-free seal that maintains structural integrity even under intense thermal cycles.. 360 ADJUSTABLE REPAIR BRACKET The ultimate solution for rusted-off factory hangers or misaligned pipes. Our unique hanger head rotates 360 degrees, allowing you to create a sturdy mounting point at any angle. This flexible clamp-on design replaces expensive welding repairs, letting you position your exhaust system with precision.. HEAVY-DUTY ZINC PLATED STEEL Built to outlast generic painted alternatives that peel and rust. Scottchen PRO utilizes high-gauge industrial steel with premium Zinc Plating, providing superior resistance against road salt, water, and corrosion. Ensures long-term durability and reliability underneath the chassis.. WIDE APPLICATION UNIVERSAL COMPATIBILITYIdeal for diverse automotive projects, designed to fix muffler inlet or outlet, pipeline, exhaust system, effectively preventing the exhaust pipes from breaking or deforming.. INTUITIVE BOLT-ON INSTALLATION Ideal for mechanics and DIYers, requiring no drilling or welding. The assembly is self-explanatory and comes with high-torque hardware for a quick setup. Simply clamp, adjust, and tighten to restore your exhaust system in minutes..

Maximum Diameter 2-34 Minimum Diameter 2-12Hex Nut 15mm Metric Band Thickness 116 Band Width 1-14. Connection Type ID-OD slip fit connection with either straight or Z compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely.. Distributes the clamping force evenly over the entire 360 to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.The 304 stainless steel and galvanizing process prevent clamps from rusting.. Application Seal exhaust clamp is the muffler repair parts, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects.. Easy to handle and disassemble. Suggestion Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..

Our 2.5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water.. Universal fitment, Joins Joins 2.5 OD Pipe to 2.5 ID Pipe. Besides, we also provide other different sizes to fulfill your needs. You would better measure before pruchase.. These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.. Easy to install, Our joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.. OTE Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service .

Size joins 2.5 OD pipe to 2.5 ID pipe, width of strap 2.94inch 74.82mm.. Application Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.. Advantage No welding design, easy to install or remove.. Material 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.. Feature The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque 63 Nm..

High-quality material Our 2.5 inch muffler exhaust pipe clamp bolts are made of high-quality materials, ensuring durability and longevity. Fits2.5 OD Exhaust Pipe. Easy installation Our clamp bolts are designed for easy installation, allowing you to quickly and securely attach your muffler to your exhaust pipe.. Secure fit The clamp bolts provide a secure fit for your muffler and exhaust pipe, preventing any unwanted movement or vibrations.. Versatile compatibility Our 2.5 inch muffler exhaust pipe clamp bolts are compatible with a wide range of muffler and exhaust pipe sizes, making them a versatile choice for many different vehicles.. Value for money Our muffler exhaust pipe clamp bolts offer great value for money, providing a cost-effective solution for securing your muffler to your exhaust pipe..

Precise Fit for 2.5 Exhaust Systems Specifically designed for 2.5 OD outside diameter exhaust pipes, ensuring a seamless and secure connection for mufflers, catalytic converters, and piping.. No-Weld Design Simplifies installation and removal without specialized tools or welding expertise, saving time and effort during repairs or modifications.. Construction Made from 304 stainless steel band, zinc-plated M10 boltnut, steel gasket, and aluminum alloy I-block for corrosion resistance and longevity.. Leak-Free Seal 360 evenly distributed clamping force prevents exhaust leaks, reduces vibration, and avoids pipe deformation under high torque 75 Nm.. 2-Year Assistance Contact our support team anytime for help with product questions or concerns..

Exhaust Pipe Clamp Size Our 2.5 inch butt joint exhaust clamps for exhaust, muffler, catalytic converter connections from 2.5 inch OD pipe to 2.5 inch OD pipe. Steel band width 3inch76.2mm. Warm tips Before purchasing our products, please check and measure your pipe OD carefully to make sure it fits the working range.. High Quality The butt joint exhaust pipe clamp is composed of 304 stainless steel band, aluminum alloy I-shaped blocks, galvanized bolts and nuts, and steel gaskets. The 304 stainless steel material is not easy to rust, corrosion-resistant, durable, and the surface of the steel band is polished without burrs.. 360Sealing Protection This exhaust clamp has a 360 tight fit and the aluminum I-block provides 360 of evenly distributed tension to prevent leakage and control material deformation while completing the seal around the connected exhaust components.. Easy to Install Exhaust clamps are designed without welding, you just need to tighten or loosen the bolt to easily install or remove, flexible disassembly and installation, save time and effort, reusable.. Application The butt joint exhaust pipe clamp are widely used for exhaust pipes, mufflers, catalytic converters, etc..

Product Size Joins 2.5 OD pipe to 2.5 ID pipe, width of strap 2.93 inches 74.5 mm. The thickness of strap is approximately 0.240.6mm. Warm tips Before purchasing our clamp, please carefully check and measure the OD and ID of your pipe. Our lap joint clamp is suitable for pipe walls with a thickness of 0.06-0.0711.5-1.8 mm.. Installation Guidelines 2 sets of exhuast clamps are in the one box. Partially thread both bolts into the gasket before initiating tightening. Gradually alternate tightening between the two bolts to ensure uniform pressure distridution. This prevents band distortion and guarantees a leak-free seal between the clamp and pipe wall.Simply wrap an aluminium foil around the connection before installation is the best.. Premium 304 Stainless Steel Construction Crafted with high-grade 304 stainless steel, these muffler clamps delivers superior durability, corrosion resistance, and rust protection. Its cold-rolled design and chromium oxide layer ensure reliable performance in harsh conditions, offering long-lasting strength and stability even under extreme temperatures.. 360 Superior Sealing Features an I-shaped aluminum alloy block that evenly distributes clamping force for a secure, leak-proof connection. Its precision-engineered design ensures tight pipe grip and optimal sealing performance, even under high-pressure conditions.. Versatile Repair Solution Designed for durable, leak-free repairs on pipes, mufflers, catalytic converters, and more. Ideal for automotive, industrial, and household applications, these clamps provide a quick, secure, and long-lasting fix for damaged or loose components..

STRONG STRUCTURE Made from zinc-plated carbon steel for heat and rust resistance in exhaust applications. 4 Pack. FITS 2.5 OD PIPE Correct size for pipes with 2.5 inch outer diameter, not for expanded or slip-fit ends.. EASY INSTALLATION Simple U-bolt style design requires no welding and can be removed or reused.. SECURE CONNECTION Provides firm compression and minimizes leakage in muffler or pipe joints.. MULTI USE Suitable for automotive exhausts, tailpipe joints, and metal pipe assembly projects..

Durability Made of carbon steel, galvanized surface, heat resistant, corrosion resistant. Size 2-12 in. ID, fits 2-12 in. OD pipe. Easy to install Weld-free design makes installation quick, easy and accurate, removable and reusable. Function Compression hose, reconnects diesel gas exhaust, even on fence gates excellent sealing and high clamping loads prevent exhaust gas and noise leakage tube ends or Flex hoses are tight but do not cause damaging deformation. Package Includes 2 Pack universal muffler tip exhaust hook U-Bolt mild steel clips.

2 Exhaust Clamps get 2 durable 2.5 exhaust clamps in one package, no need to buy extras for replacements. Quality Galvanized Iron Material thicker more rust-resistant than standard clamps, with heat-resistant silver coating. Perfect 2.5 Od Fit specifically sized for 2.5-inch outer diameter pipes, ensuring leak-free sealing. No-Weld InstallationHeavy-duty U-bolt and saddle flange design installs in minute,no welding required just tighten the 38 nuts Creates a tight seal to prevent exhaust leaks and noise.. Beyond Exhaust Use also works for compressing hoses, Securing fence gates, Fixing gas exhaust tips.

STAINLESS STEEL MATERIAL - Are you looking for quality exhaust clamp Our 2.5 inches exhaust clamp is made of high-quality 304 stainless steel, which is strong, corrosion-resistant, anti-rust, with excellent durability and many years of service life.. EASY TO USE - The stainless steel exhaust clamp comes with flexible bolts and nuts, allowing you to install the product easily and quickly. The exhaust clamp is suitable for connecting exhaust pipes or mufflers with an outer diameter of 2.5 inches.. STRONG SEALING - The butt joint exhaust band clamp has a 360 degree even clamping force to prevent pipes deformation or leakage and provide the best sealing effect. The silver appearance makes it simple, stylish and modern, which can perfectly match any exhaust pipe.. WIDE RANGE OF APPLICATIONS - You will get 4 pack butt joint exhaust band clamp sleeves to meet your various needs. They can be widely used in exhaust pipes, mufflers, catalytic converters, downpipes, manifolds and so on.. GUARANTEE - Quality and customer satisfaction are our top priorities. If our exhaust clamps have any quality problems, please don't hesitate to contact us at any time. You have no risk, click Add to Cart.

HIGH-QUALITY MATERIAL - Made of premium 304 stainless steel, our exhaust clamp band sleeve has great corrosion resistance and not easy to rust. After many tests, they can give a good performance in the exhaust systems, and high quality in durability and reliability.. PERFECT SEALING CAPABILITY - These butt joint exhaust band clamps have been adopted high-strength fastening parts, providing the real leakage-free sealing capability. It is perfect for 2.5 inches exhaust pipes or mufflers.. 360 DEGREE FULL CLAMPING - Designed with an entire 360-degree full clamping area, the stainless steel exhaust clamp has an overall 360-degree clamping force without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system.. WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds.. MONEYBACK GUARANTEE - We promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to contact us, and we will make sure to provide the best service..

Size This narrow band clamp joins a 2.5-inch OD-ID slip-fit pipe. The width of the strap is 1.22 inches 31 mm.. Application The narrow band clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, catalytic converters and more.. Advantage The clamp features a no-welding design, making it easy to install or remove. It is recommended to apply exhaust sealant on the pipes before installation.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Feature The band clamp distributes force evenly at 360, providing a secure seal. The torque is 63 Nm..

SPECIFICATIONS Inner Diameter 2.5 inch Strap Width 1.22 inch 31mm Strap Thickness 1.8mmFits 2.5-inch OD straight pipe Not compatible with flaredexpanded pipes. PREMIUM MATERIAL Narrow Band Muffler Clamps are mainly made of high-quality 304 stainless steel, which is rust-proof, corrosion-resistant and waterproof.. WIDE APPLICATIONS This Narrow Band Muffler Clamp is engineered for a wide range of applications, providing a secure seal on exhaust pipes, mufflers, catalytic converters, and other critical components.. EASY NO-WELD INSTALLATION This exhaust clamp features a smooth surface design for quick and hassle-free setup. For an optimal seal, we recommend applying a specialized exhaust sealant to the pipe interface before installation.. WHAT YOU GET This package include 2pcs Narrow Band Muffler Clamps..

Material304 stainless steel band, zinc-plated carbon steel M10 boltDouble stack self-locking lock washers and nut, carbon steel gasket, aluminum alloy I-block.. SizeJoins 2.5 inch OD-ID slip fit pipe, width of strap 1.22inch 31mm.. AdvantageNo welding design, easy to install or remove.Double stack self-locking lock washers keep the nut from loosening. It is recommended that put exhaust sealant on the pipes before installation.You will get Vitonsbay 2.5 Inch Narrow Exhaust Band Clamp, welcome guide,our worry-free 6-month warranty, and friendly customer service.. FeatureThe exclusive reaction block provides a full 360 equal distribution of stretching forces, prohibiting pipe distortion while completing a seal around the joined exhaust components.Torque 63 Nm.. Application Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..

Material304 stainless steel band, zinc-plated M10.9 bolt and nut, steel gasket, aluminum alloy I-block.. Advantage Ease of Installation This exhaust band clamp sleeve comes with fastening bolts. You only need to tighten or lose the bolts to connect or release. No welding required, easy to use.. Size Joins OD pipe to ID pipe, width of strap 3.5 inch 88mm.Confirm the size before buying. Application Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.system components such as pipes, mufflers, catalytic converters etc.. Features These exhaust clamps adopt an integrated structure, minimizing the complexity of the number of parts and maximizing material efficiency, thereby reducing weight. 12.9 degree high-strength fasteners provide true sealing force, and the unique reaction block provides 360 uniformly distributed tensile force, completing sealing around the connected exhaust components while preventing pipelined deformation.. Enhanced Sealing PerformanceOur exhaust pipe clamps, paired with high-quality sealant, ensure a tight fit after installation, preventing gas leaks and improving the overall performance of the exhaust system..

PREMIUM MATERIAL Exhaust Clamps are mainly made of high-quality 304 stainless steel, which is rust-proof, corrosion-resistant and waterproof.. SPECIAL DESIGN Exhaust Clamp uses the 360-degree winding design, which can provide uniform force to the joints and prevent the deformation of the pipe connection.. SPECIFICATIONS ID 2.5 inch63mm Thickness0.5mm Width of strap75mm.Fits 2.5inch OD straight pipe Not compatible with flaredexpanded pipes. WIDE APPLICATION The exhaust clamp can be used in many scenarios, such as exhaust pipes, mufflers, catalytic converters etc.. MULTIPLE CHOICES We have a wide range of Exhaust Clamps in different sizes to choose from2.5 3..

PREMIUM MATERIAL Exhaust Clamps are mainly made of high-quality 304 stainless steel, which is rust-proof, corrosion-resistant and waterproof.. SPECIAL DESIGN Exhaust Clamp uses the 360-degree winding design, which can provide uniform force to the joints and prevent the deformation of the pipe connection.. SPECIFICATIONS ID 2.5 inch63mm Thickness0.5mm Width of strap75mm.Fits 2.5inch OD straight pipe Not compatible with flaredexpanded pipes. WIDE APPLICATION The exhaust clamp can be used in many scenarios, such as exhaust pipes, mufflers, catalytic converters etc.. MULTIPLE CHOICES We have a wide range of Exhaust Clamps in different sizes to choose from2.5 3..

ouyanglong exhaust clamp fits for 2.5 inch OD Pipe.. Exhaust clamp perfect for mufflers, pipes, catalytic converters, headers manifolds etc.. 2 12 inch Exhaust clamp are made from high quality 304 Stainless Steel and plating zinc. Durable Anti-rust.. I-Block design of the exhaust band clamp distributes 360 forces evenly, providing a seal and preventing material deformation.. Lap joint clamp have a no-weld design, easy to install or remove..

Function This exhaust clamp is designed to connect 2.5 outer diameter pipes with inner diameter pipes, effectively reducing noise and exhaust leaks without flattening the pipes, thereby creating a sturdy and maintainable connection.. High Quality This exhaust clamp is made from high-quality metal materials that are resistant to rust and deformation. High-hardness bolts provide excellent clamping and sealing capabilities, capable of withstanding significant clamping forces.. Easy Installation This exhaust clamp requires no specialized tools for setup. Simply position it over the pipe joint, tighten the bolts to the recommended torque, and it is ready for use.. Design This exhaust clamp features a 360-degree full clamping area design with uniformly distributed tensile force, effectively preventing pipe deformation and ensuring no damage to the pipe ends.. Package You will get 1 x exhaust clamp, size 2.5 , which enhances the stability of the exhaust system during vehicle operation. The lap joint exhaust clamp is widely used in the exhaust systems of automobiles, commercial vehicles, and off-highway industries..

Size This narrow band clamp joins a 2.5-inch OD-ID slip-fit pipe. The width of the strap is 1.22 inches 31 mm. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Feature The band clamp distributes force evenly at 360, providing a secure seal. The torque is 63 Nm.. Advantage The clamp features a no-welding design, making it easy to install or remove. It is recommended to apply exhaust sealant on the pipes before installation.. Application The narrow band clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, catalytic converters and more..

Size Our 2.5 exhaust clamp joins 2.5 OD to 2.5 ID pipe Strap Width 2.94inch74.82mm, Torque 63 Nm. Advantage Easy to install and remove without welding. Application Lap joint clamp simply and effectively connects exhaust system components, such as mufflers, pipes, catalytic converters, etc. Material 304 stainless steel band Zinc-plated M10 bolt and nut Steel gasket, Aluminum alloy I-block. Feature Making the force of 360 evenly distributed, the band clamp provides a seal and prevents material deformation.

STURDY Our u-clamps are made of metal with excellent workmanship, smooth surface and corrosion resistance. U-bolt saddle design can reliably fix and connect the equipment. FEATURESSaddle Style clamps are designed without welding, flexible, can be quickly disassembled and reused. Muffler Exhaust Clamps have good sealing, which can effectively prevent exhaust gas and noise leakage, and will not cause damage or deformation to the pipe tip. INSTALLATION U Bolt Clamp on Tip Pipes Connection is easy to install, just insert and tighten the nuts at both ends, note that in the process of installation can be back and forth alternately twisted bolts, so as to ensure uniform tightening of the two ends of the force balance. APPLICATIONS Universal muffler tailpipe hook, can be used for sealing muffler inletoutlet, elbow joints, piping, maintenance exhaust systems. SIZE U-clamps is 2.5 ID, suitable for 2-12 inches OD pipe. Please measure the size of your equipment and choose the right U-clamp before placing an order. YOU WILL GET 2 x 2.5 inch U-Bolt Clamps, after receiving the U-clamps, if you need any help during use, we will be happy to assist you.

Package includes1 x turbo exhaust clamp. Need professional installation, no instructions is included.. Fits for 2.5 ID tube, perfect for catback, exhaust, mufflers and downpipes.. Please check size in picture before ordering.. Please allow 0.5-1 inch difference due to manual measurement..

Size This lap joint clamp joins a 2.5 OD pipe to a 2.5 ID pipe. The width of the strap is 2.94 inches 74.82 mm. Please accurately measure the outer diameter of the pipe before placing an order.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Advantage The clamp features a no-welding design, making it easy to install or remove.. Feature The band clamp distributes force evenly at 360, providing a secure seal and preventing material deformation. The recommended torque is 63 Nm. Application The lap joint clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, and catalytic converters, and more..

Universal Exhaust System Compatibility This exhaust band clamp serves as a versatile solution for connecting heavy-duty exhaust components, including catalytic converters, exhaust nozzles, manifolds, resonators, flexible pipes, and mufflers. Ideal for repair or upgrade projects, it seamlessly integrates with various exhaust systems, eliminating the need for multiple specialized clamps.. 360 Leak-Proof Sealing Design The exhaust clamp is engineered with a mild steel semicircular gasket and an I-shaped block, this stainless steel muffler seal ensures uniform 360 clamping force distribution. It tightly secures pipes to prevent leaks, control material deformation, and maintain optimal exhaust flowcritical for performance and emission compliance.. Tool-Free Reusable Installation Featuring a flexible bolt-and-nut structure, this adjustable exhaust clamp allows easy removal and reinstallation without damaging pipes. No professional tools required simply tighten the bolts to achieve a secure fit. Its reusable design makes it perfect for temporary fixes or permanent installations.. Enhanced Seal Tip For superior sealingespecially on slightly out-of-round pipeswe recommend wrapping the clamping surface with multiple layers of aluminum tape. This pro tip fills micro-gaps, further preventing leaks and ensuring a professional-grade seal that withstands extreme temperatures and vibrations.. Wide Application This product is not vehicle-specific and works with a wide range of applications. Please review the product specifications and confirm compatibility before placing your order. No instructions are includedprofessional installation is highly recommended for optimal use. We stand behind our product quality..

Size This lap joint clamp joins a 2.5 OD pipe to a 2.5 ID pipe. The width of the strap is 2.94 inches 74.82 mm. Please accurately measure the outer diameter of the pipe before placing an order.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Advantage The clamp features a no-welding design, making it easy to install or remove.. Feature The band clamp distributes force evenly at 360, providing a secure seal and preventing material deformation. The recommended torque is 63 Nm.. Application The lap joint clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, and catalytic converters, and more..

Flexibility2.5 Butt joint exhaust clamp,Joins 2.5 OD pipe to 2.5 OD pipe, Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Butt joint clamp 2.5,Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.. 2.5 Inch butt joint exhaust clampButt-joint clamps are a good choice when cosmetic appearance is important. This type of clamp is for connecting two pipes that have the same outside diameter.. Easy To InstallStainless Steel Butt Joint Exhaust Band Clamp-Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware.The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint.. Package Includes Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2.5 Inch,2Pcs.2.5 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel.Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion.. Clamp material Stainless Steel. 2.5 inch 2 12 butt joint exhaust band clamp,Perfect for Catback Exhausts, Mufflers, Downpipes, Headers, Manifolds.The items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers.

Size joins 2.5inch OD-ID slip fit pipe, width of strap 1.22inch 31mm.. Application Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.. Advantage No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation.. Material 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.. Feature The band clamps make the force of 360 evenly distributed to provide a seal. Torque 63 Nm..

Package Includes One Piece 2-12 stainless exhaust clampnormally fit for OD 2.5 exhaust pipes, according our test, this clamp can also be used on Our ID 2.5 exhaust adapter.. Made of T201 stainless steel with heavy duty U-bolt saddle design. The 2.5 exhaust hanger on exhaust with reinforced ribs on the saddle flange, expertly crafted and durable construction for long service. The high quality and craftmanship of the heavy duty clamp can resist corrosion and out of shape during use.. The stainless clamp is consisted of u-bolt, saddle flange and 38 Nuts.. Please check the detail information as belows. We value your shopping experience and strive to offer high quality product with sincere service. If you have any questions, please contact us..

Precise 2.5-Inch Fit Universal ApplicationThis 2.5 exhaust clamp is engineered to seal standard 2.5 OD exhaust pipes. It serves as a versatile tailpipe clamp 2.5 and 2.5 muffler clamp, perfect for connecting pipes, mufflers, and catalytic converters without welding.. Durable 304 Stainless Steel ConstructionMade with a high-quality 304 stainless steel band, this exhaust band clamp resists rust, corrosion, and high heat. It ensures a long-lasting, reliable hold on your exhaust pipe in all conditions.. No-Weld, Tool-Friendly InstallationThe no-welding design makes this narrow band muffler clamp stainless steel for pipes easy to install or remove with basic tools. For an optimal seal, apply exhaust sealant to the pipe before tightening the pre-attached hardware.. 360-Degree Uniform Sealing ForceThis exhaust clamp features a band that distributes pressure evenly around the entire joint. The 360 seal prevents leaks and reduces noise, providing a more secure connection than standard clamps.. Complete 2-Piece Value PackGet everything you need with this practical 2-pack. It offers great value, ensuring you have a spare exhaust band clamp on hand for current repairs or future projects on your vehicle's exhaust system..

Size joins 2.5 OD pipe to 2.5 OD pipe, width of strap 3inch 76.7mm.. Application Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.. Advantage No welding design, easy to install or remove.. Material 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. Feature The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque 63 Nm..

Size Joins malefemale flange 2.5 ID to 2.5 OD pipe. T-Bolt thread size M81.25.. Advantage V-band clamp is easy to install and remove. The male and female flanges can be connected more stable, and provide a good seal with uniform pressure at the flange.. Feature Male and female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation.. Material 304 Stainless steel clamp and flanges,mild steel T-Bolt 304 stainless steel for long durability and reliability, corrosion resistance and high-temperature resistance.. Application Compatible for exhaust system, turbocharger, downpipe, muffler etc..

HIGH QUALITY ---- Our 2.5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water. Universal fitment.Joins Joins 2.5 OD Pipe to 2.5 ID Pipe, made of 304 stainless steel. Besides, we also provide 4 different sizes to fulfill your needs. You would better measure before pruchase. These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Easy to installButt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. NOTE Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service.

Product sizeThe size of V Band Clamp is bigger than 2.5 inch. The inner diameter of malefemale flange is 2.5 inch fit for 2.5 OD pipe.. Premium material V Band Clamp is made of high-quality 304 stainless steel, which is rust-proof, corrosion-resistant and waterproof.. Wide application V Band Clamp and Flanges are widely used in the pipe connection of exhaust pipes, pumps, diesel engines, turbochargers, mufflers, air ducts, intercoolers and other equipment.. How to use Step 1 Polishing the incision of the steel pipe Step 2 Weld after inserting the male and female flanges at the incisions at both ends Step 3 Tighten the screws after installing the V Band Clamp on the flange.. What you get2.5 inch v band clamp Male Flange Female Flange..

Package Includes you will receive 4 pieces of 2.5 inch exhaust clamp These clamps provide a practical and efficient way of connecting exhaust pipes, mufflers, and more A good attribute to consider for those in need of a tool that will secure and seal their car components. Proper Dimension these exhaust clamps are approx. 2.5 inches in diameter, 3 inches in width, which can be applied to connect a pipe with an outer diameter of 2.5 to a pipe with an outer diameter of 2.5, the clamps offer good sealing and prevent material deformation. Quality Materials our 2.5 inch exhaust band clamp is made of 304 stainless steel and zinc plating A desirable feature for those seeking clamps that resist corrosion and rust brought about by water interaction. Simple Installation the butt joint band clamp is designed to hold the pipe securely in a 360 degree arc, providing a uniform force without leakages The 2 12 inch exhaust clamp is easy to install, no welding required Just fit them onto your pipe, tighten, and you're good to go It is recommended that put exhaust sealant on the pipes before installation. Wide Range of Application the exhaust clamps are versatile tools for industries and applications, whether you're looking to hold exhaust pipes, mufflers, or other exhaust system components, these clamps deliver enhanced functionality and are practical tools in your toolkit.

DOUBLE-LAYER DESIAGN The double-layer design adds extra durability and help reduce exhaust leaks, great choice for a reliable connection . SIZE Width of strap 3.47inch 88mm, Inner diameter 2.5 inch, universal fit for 2.5 inch OD pipe. PREMIUM MATERIAL 304 Stainless steel band, zinc-plated M10.9 bolt and nut, steel gasket, aluminum alloy I-block, make the exhaust band clamps work great. EASY TO INSTALL The exhaust clamp is designed with a bolt and nut construction, no welding required, easy to install or remove. APPLICATION The exhaust pipe clamps effectively connect catalytic converters, exhaust ports, exhaust manifolds, exhaust resonators, exhaust flex pipes, and exhaust muffler repair. Its a solid choice for anyone needing a reliable, durable solution for exhaust systems.

WITH HOOKS FOR SUPERIOR STABILITY AND VIBRATION DAMPING - Exhaust hangers with hooks for very secure attachment to the exhaust pipe.This design prevents unwanted vibration or movement of the exhaust pipe it also prevents collisions with other components during vehicle motion, thus greatly reducing the risk of system failure or damage. Universal exhaust hanger not only greatly reduces the pressure on the pipes, but also extends the overall life of the exhaust system. At the same time, it also effectively reduces the impact of vibration on the engine, providing your car with stable and reliable exhaust protection.. QUALITY STAINLESS STEEL STRONG RUST RESISTANCE - Galvanized material is susceptible to rust when exposed to complex environments for extended periods. To inhibit oxidation, our exhaust hangers are made of high-quality stainless steel, which has excellent rust resistance and effectively prevents oxidation. Stainless steel exhaust hanger has high strength and excellent toughness. Whether facing frequent road use or complex weather conditions, it can always maintain excellent performance, not easy to deform or fracture, greatly extending the product life, eliminating the need for frequent replacement, and saving maintenance costs.. PRECISELY SIZED ACCESSORIES A QUIET RIDE - The exhaust clamps have a 2.5inch inside diameter and the exhaust hangers are 7 inches long,5.5 inches of which are threaded. The thick and sturdy M10 hangers are paired with 38-inch nuts and mufflers. 38-inch serrated nuts are uniquely designed to grip securely, eliminating the risk of loosening. The exhaust clamp with muffler can effectively suppress the noise generated during the exhaust process, creating a quiet and comfortable driving environment for the driver. The 2.5inch muffler hanger fit most of the models on the market, ensuring a tight fit and stable driving after installation.. FLEXIBLE AND QUICK INSTALLATION - The rubber exhaust hangers are extremely easy to install, and the hooks support 360-degree rotation, allowing you to adjust the angle to suit your needs, whether you're facing a confined space or a complex and difficult area. After fixing the pipe, the length of the hanger can be easily adjusted according to the specific situation, and the whole process can be completed in just 5 minutes without the need to cut or other complicated operations. This efficient and easy installation saves you a lot of time and energy and helps you complete the exhaust pipe installation quickly and securely.. WIDE APPLICATION, PERFECT MAINTENANCE - The exhaust clamp with hanger rear fit a wide range of exhaust systems on the market with 2.5inch tubing, including cars, trucks, SUVs, and many more. Whether the vehicle is traveling on a rough mountain road or a smooth highway, it can effectively ensure the exhaust pipe's stable operation under complicated road conditions and greatly reduce the frequency of maintenance. It provides vehicle owners with reliable and efficient exhaust system maintenance programs, significantly improves vehicle performance, extends car service life, and is undoubtedly the ideal choice for your car's exhaust system maintenance..

HIGH QUALITY ---- Our 2.5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water.. Universal fitment.Joins Joins 2.5 OD Pipe to 2.5 ID Pipe, made of 304 stainless steel. Besides, we also provide 4 different sizes to fulfill your needs. You would better measure before pruchase.. These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.. Easy to installButt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.. NOTE Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service .