Important note This cable has two male plugs one-quarter inch TRS male and XLR male it does not connect to microphones, which require an XLR female port for mic use, search XLR female to male designed for balanced line-level output to monitor input only. Heavy-duty 22 AWG conductor Uses oxygen-free copper for lower resistance and cleaner balanced signal transmission from audio interface to studio monitor thicker gauge reduces signal loss compared to standard 24 AWG cables. Compatibility check before buying Requires a source device with one-quarter inch TRS outputs and a destination device with XLR male inputs compatible with Focusrite Scarlett 2i2, KRK Rokit, Yamaha HS series, and JBL 305P MkII. Dual shielding construction Aluminum foil layer plus ninety-eight point five percent OFC braided copper spiral eliminates EMI and RFI interference three-conductor balanced design cancels common-mode noise for clean audio in studio, stage, or home recording environments. Two-pack for complete stereo setup Each cable carries one mono balanced channel connect cable one from left interface output to left monitor XLR input and cable two from right output to right monitor both cables required for full stereo playback. Color-coded connector rings for easy channel identification One cable features a black ring and the other a red ring instantly identify left and right channels without tracing cables behind equipment or rack. Built for long-term use Nylon braided jacket and twenty-four karat gold-plated connectors withstand over fifteen thousand bends without loss of flexibility or signal performance backed by a three-year manufacturer warranty covering defects in materials and workmanship also available in ten-foot and fifteen-foot lengths. 3-YEAR WARRANTY AND MORE LENGTHS 3-year manufacturer warranty covers defects in materials and workmanship also available in 10ft and 15ft for larger studio rooms or live sound setups needing more reach between mixer, interface, and powered speaker.

Function DesignDISINO Dual 14 inch to XLR Male Y Splitter Cable is perfect plugged into a stereo 14 inputoutput to create an XLR male connection, it can be used in both directions. The XLR signal is simply split across the 14 connectors. Suitable for splitting or combining audio signals, is ideal for solving a number of audio problems.it can be used to improve connectivity between equipment such as amps, mixers and microphones.. Super CompatibilityXLR to 2x 6.35mm cable is is perfect for connecting microphones with 14 inch jack to DV cameras, camcorders, or other professional audio equipments with XLR connector. Suitable for mic, mixer, amplifier, sound card, KTV, home theater and other environments etc.. Excellent Sound24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer.Multiple metal-wound shield to effectively isolate electromagnetic interference, no noise and current to restore original sound quality.It splits closer to the 6.35mm ends, the distance to the split point is 19.6 inchs50 cm .This cable just splits mono into two mono signals, It does not combine signals to make a stereo signal.. Professional Quality22AWG 4N Oxygen Free Copper with shielding, Foil shielding and metal braid shield eliminate interference, deliver pristine sound, No hum, no noise, crystal clear music. High quality noise free performance,great choice for music lover, It's especially great for studio or live performances.. Incredible DurabilityHeavy Duty Flexible PVC Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch,high durability. The thick copper braid is highly elastic.Cotton Yarn wrap reduces noise.made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable..

Premium Proreck Audio Quality This Proreck microphone cable ensures crystal-clear sound transmission with low noise, delivering professional performance for stage, studio, and live sound applications.. Reliable Neutrik REAN Connectors Equipped with high-quality Neutrik REAN connectors, this Proreck microphone cable provides a secure fit and stable signal transfer for uninterrupted audio.. Durable 24 AWG Construction Built with a robust 24-gauge conductor, the Proreck microphone cable offers excellent conductivity, superior durability, and long-lasting performance.. Flexible Portable Design Featuring a rugged yet flexible PVC jacket, this Proreck microphone cable is tangle-resistant and easy to handle during setup, storage, and transport.. Versatile Microphone Cable for Any Setup Perfect for connecting microphones, audio mixers, interfaces, and other devices, the Proreck microphone cable is ideal for musicians, DJs, and sound engineers..

Balanced XLR female to 14-inch TRS adapter converts an XLR male output to a balanced 14-inch outputPackage included 4 pack XLR female to 14 TRS stereo male adapter.. Female XLR to 14 adapter,Connection A 3-Pin XLR Female Connecter Connection B 14 TRS Plug.. Pro-grade performance delivers pristine sound with this male 14 to XLR adapter.Great for mixers, microphones, amplifiers, EQ, rack gear, keyboards, guitars, electric piano, electric drums, etc.. Male 14 inch to XLR adapter features robust construction in a rugged metal housing, Stable, Durable, and Flexible, work perfectly.. The international standard of Female XLR to 14 inch audio connectors, reliable transmission of audio frequencies, all-metal construction ensure loss-less transmission signal. Protective Shielding for RF and EMI noise elimination..

4-Channel Shielded Audio Cable This Proreck Audio cable has 4 channels, allowing you to transmit multiple audio signals at the same time. The added shielding helps block electromagnetic EMI and radio frequency interference RFI, ensuring clearer sound with minimal noise.. Faster And Better Sound Quality The Proreck Audio cable features a copper core, providing excellent conductivity and ensuring superior signal transmission with minimal loss. This makes it a reliable choice for studio recordings, live sound setups, and other demanding audio applications.. Number And Color Mark Each cable is labeled with matching numbers and colors, enabling quick and accurate connections to your devices. This makes it an excellent choice for professional audio setups, surround sound systems, or multi-track recording.. Connection Stability Compared to wireless transmission, audio cables offer a more stable and reliable connection, preventing audio signal interruptions or delays.. Wide Compatibility This 4 channel 6ft snake cable features standard-sized TRS to XLR male connectors, making it compatible with a wide range of devices such as headphones, speakers, mixers, and instruments. It is versatile in application..

Nature Sound Smithok xlr to 14 adapter uses shielded 24 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.. PROFESSIONAL Balanced 14 to XLR Cable This 6.35mm TRS to XLR Male Cable is designed to convert a balanced 14 TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. Balanced XLR to 14 cable is perfect for interconnecting many types of audio equipment with XLR connector and 14 inch TRS jack.. Robust Construction Standard user-friendly, This balanced 14inch to 3pin XLR Male cable is 6.6ft long. The wire is nylon braided, it's strong and heavy duty. 14inch XLR plug is 24k gold plated, signal can go through gold plated plug with less lose. This TRS plug is also drag-proof design, the plug tail will hold the wire tightly, so the wire won't be pulled out easily. With drag-proof design, the cable can last much longer. It's also strong enough for long distance transmission.. High Quality Materials Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.3mm0.25 inch, Top quality and made material, Polyethylene insulation improves high-frequency response, strong, flexible. The 14 to XLR cable has molded strain relief to support the weight of a device. This male xlr to 14 cable use high quality material of nylon braided cable, which is more soft, durable and beautiful. Easier to clean. Provide longer service life than normal cables.. What You Get 2 packs 14 to xlr male 6.6 feet. Smithok is a professional manufacturer focusing on audio cables, Each cable will be tested carefully before packing. We offer 2-year warranty for each of them. you don't have to wait for long for return and repair. We'll arrange new cable for replacement once the issue confirmed., so please feel free to contact us if you have any problem about this xlr to 6.356.5mm microphone cable..

Widely Compatibility and Multiple Use Smbiutoofe XLR to 14 designed to convert a balanced XLR output to a 14 TRS input, highly compatible with mixers, power amplifier, stereo system, speakershome karaoke system, sound card and other types of audio equipment with XLR connector and 14 inch TRS jack.. High-Fidelity Sound Quality This XLR male to 14 uses 24K Gold-plated 3 pins and 6.35mm connector, which can eliminate signal loss and static noise, improve the signal transmission and durability Zinc alloy material shell blocks any interference which prevents the loss of sound quality.. Noise Cancellation Smbiutoofe 14 to XLR use 24AWG oxygen-free copper OFC conductors and multi-layer shielding structure, built with double aluminum, foil shielding and copper shielding for high-quality sound and minimal signal loss, ensuring clear, distortion-free audio.. Flexible Durable Nylon Braided Our 14 TRS to XLR male use high-density nylon braided outer layer over the import PVC Jacket, improve the flexibility and durability. This XLR to TRS cable can stand 100,000 times bends without reducing the flexibility. 10 times more durable than normal PVC cable. Extend the service life of this cable.. What You Get Balanced XLR to 14 cable 6ft 2packs, easy to store and resistant to dirt. Tangled free..

Model SAXT-4x5M. Channels 4 each TRS Male 14 Male XLR connections. Length 5 feet from tip to tip. Conductor 22 ga high purity copper. Color coded and numerically labeled.

Model Number SATRXL-M10 Multiple Colors 6 Pack. Metal 3 Pin XLR Male to TRS 14. Length 10 Feet for each cable. Heavy Duty Flexible Rubber Jacket. Brand New with One Year Warranty.

This Balanced XLR Cable is designed to convert a balanced 14 TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications.. High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound.. Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise.. The XLR connector is a high quality metal shielded type with positive locking into the microphone The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability.. XLR pin 1 is connected to the 14 plug sleeve, XLR pin 2 is connected to the 14 plug tip, XLR pin 3 is connected to the 14 plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..

SHORT 1FT PATCH SOLUTION At just 1 foot 30cm, these cables are the perfect length for patching adjacent studio gear and organizing audio racks. Eliminate the spaghetti mess of long cords behind your deskideal for clean, professional cable management.. PRO BALANCED AUDIO Designed to connect gear with balanced 6.35mm 14 TRS outputs to XLR inputs. The balanced wiring provides crisp, uncolored signal for recording and live sound.. LOW INTERFERENCE PROTECTION Features high-purity conductor wiring and internal shielding to protect against EMI and RFI. Enjoy transparent, high-fidelity sound transmission without, even in busy studio environments.. RUGGED DURABILITY FLEXIBILITY Built with a heavy-duty PVC jacket and reinforced strain relief. Designed to withstand daily use.. SECURE CONNECTION 2-PACK VALUE Precision-molded 3-pin XLR male and 14 inch TRS connectors provide a snug, lock-in fit. Connvenient 2-Pack for home studios, professional stages, and audio-visual setups..

Wide Compatiblity XLR to Dual 6.35mm 14'' TRS Male Balanced Y Splitter Cable, it's a biditional cable, 14 TRS Male can input or output, by connecting to the XLR, designed to split the XLR into two 14 TRS balanced audio cable, suitable for microphone, mixing board, amplifier, sound card, KTV, home audio theater and other devices. Sound Quality Gold Plated Plug and Joints, provides high sound quality with noiseless Interference, no hum, crystal clear music it's more sensitive and more steady connection. Signal Transferring The High Coverage of OFC conductor, covered with polyethylene insulation, inner with the tensile cotton yarn, aluminum foil shielding, and metal shielding wrap eliminate interference the cable is with the dual shielding by the foil and conductivity pvc, which ensures the maximum cancellation of noise undisturbed by external signals, provides pristine sound. Durability Durable Molding Type Cable SR, flexible and strong toughness, environmentally friendly pvc jacket, and high quality metal housing, which makes a longer service life. Quality Assurance Manufacting process is under cotrol from the incoming check, in-process testing and outgoing audit toa ensure the product quality to satisfy your purchase.

Widely Application The XLR cables are perfectly compatible with equipment has 3-pin connectors such as microphones, stage lighting, DMX lamps, mixing boards, power amplifiers, studio harmonizers, speakers, patch bays and so on. In addition, these microphone cables are widely used at stage speakers, club stages, KTV, and home theater. 120 Ohm impedance.. Professional Quality20AWG 4N Oxygen Free Copper with shielding, Foil shielding and metal braid shield eliminate interference, deliver pristine sound, No hum, no noise, crystal clear music. High quality noise free performance,great choice for music lover, It's especially great for studio or live performances.. Stable Connection Our microphone cables uses heavy-duty zinc alloy housing, pure copper silver-plated XLR pins, self-locking male to female connector design, this xlr speaker cables can provide a stable connection between devices with an XLR interface, easy plugging unplugging. High-quality materials Cable Heavy Duty Flexible PVC Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch,high durability. The thick copper braid is highly elastic. Cotton Yarn wrap reduces noise. made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible .. 2 yeas warrantyWe ZTOXLR offer 2 years warranty for this XLR patch cable, for any issues during the warranty time, customers can come back for replacement. Our technical support is also online for 24hours. Should any issues happened after package received, customer can message us from order page, and we'll give response within 12 hours..

Professional-Grade XLR to 14 Cable Connects mixers, powered speakers, amplifiers, and recording equipment, ideal for professional studio, live sound, and stage use. Bi-Directional Design 14 to XLR Male Adapter with plug-and-play setup, no drivers required, making it versatile for instruments and audio devices. High Audio Quality TRS cable designed with dual-channel TRS to XLR balanced connection maintains audio quality, reducing interference for long-distance transmission. Anti-Oxidation Performance XLR Male to 14 Inch Cord features copper conductors, tin-plated pins, and nickel-plated connectors for secure signal stability and anti-oxidation performance. Superior Durability Mic Cable XLR to 14 Inch Male built with PVC jacket and SR strain relief to minimize stress, prevent wear, and ensure durability in daily use.

BALANCED 14 TO XLR CABLE This 6.35mm TRS to XLR male cable is designed to convert a balanced 14 TRS output to a balanced XLR input. Typically used with active speakers, it transfers the audio signal from the mixing console to the speakers. The balanced XLR to 14-inch cable is ideal for connecting a variety of audio equipment through the XLR connector to the 14-inch TRS jack.. DOUBLE-SHIELDED The 14 inch TRS to XLR male balanced mic cable constructed with 20 AWG OFC conductors, double-layers of shielding high density bare copper braid shielded aluminium foil, so as to reducing shaking noise, trampling noise and electrostatic sound interference. No humming, no noise.. Professional Connector 24K gold-plated 6.35mm jack connectors provide excellent conductivity, reducing resistance, audio signal attenuation and distortion. Heavy Duty Metal Connector made of heavy alloy with molded stress relief and frosted texture. The heavy-duty metal shell blocks out interference and reduces loss of sound quality.. PREMIUM SOUND QUALITY This mono plug adapter seamlessly transmits audio for clear sound quality, while ensuring reliability and reduced signal loss.Maintains consistent sound output over time. A great choice for music lovers.. COMPATIBLE FLEXIBLE Quarter inch TRS male to XLR male patch cable compatible with equipment with 3-pin XLR connectors and 6.35mm socket such as Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier..

Model Number SATRXL-M25 6 Pack. Blue, Red, Green, Yellow, Purple, and Orange. Metal 3 Pin XLR Male to 14 TRS Male. Heavy Duty Flexible Rubber Jacket. Length 25 Feet for each cable.

Package included 4 packs XLR Male to 14 TRS stereo male adapter. 24K Real Gold plating head makes better contacting. 14 to xlr adapter male pack. Connection 3-Pin XLR Male Connector to 14 TRS stereo male plug.. Male xlr to male 14 inch stereo adapter is high quality robust and durable all-metal die-cast housing, stable, durable, and flexible, work perfectly. Pro-grade performance delivers pristine sound with this male 14 to XLR adapter.Great for mixers, microphones, amplifiers, EQ, rack gear, keyboards, guitars, electric piano, electric drums, etc.. We guarantee 100 strict quality control prior to product sale.If you encounter any issues, please contact us via Amazon message or QA. We are committed to promptly providing you with a satisfactory solution..

Support data and audio signal transmission -Dorongtou XLR to 14 inches 6.35 mm TRS single -point microphone cable with excellent clarity andhigh noise and radio frequency interference elimination. 3 Nuclear XLR cable design is famous for its significant improvement of noise reduction effect, reducing noise by 95. Balanced Shielded Wire-XLR cable 3-core outer braided oxygen-free copper shield and aluminum shield. Male XLR to 14 Inch 6.35mm TRS Mono Jack Microphone Cable,, gold-plated connectors. Ensure the smooth transmission of data and audio signals.. High Quality-These cables use thick wires, gold-plated connectors and solid connector shells. XLR Male XLR to 14 Inch 6.35mm TRS Mono Jack Microphone Cable, continue our tradition of providing the highest quality cables at the best prices.. Multi-purpose-XLR male to 14 inch 6.35mm TS mono jack microphone cable, suitable for professional stage lighting instruments, moving head lights, par light spotlights, and various types of XLR input and output Musical instrument. Such as microphone, effector, mixer, equalizer, DMX LED, electronic organ, amplifier, electric guitar. Suitable for concert halls, schools, churches, studio lighting and recording, and many other professional audio settings.. 24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer The right size, they always fit correctly, never too tight or too loose..

Excellent Sound Quality Stable TransmissionThis 6.6FT TRS 6.35mm 14 Inch to XLR 3 Pin Male Balanced Interconnect Audio Cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity.. Wide Compatibility The XLR to Quarter Inch cable is compatible with the equipment with 3 pin XLR connectors and 6.35mm socket such as Mixer, Camera, Amplifier, Sound box, Power Amplifier, frequency divider, voltage limiter, digital decoder, Audio Sound Console and Stereo System and more.. High Durability Flexibility Yumiwoow XLR to 6.35mm cable is made of softNylon braided heavy duty jacket to ensure flexibility and durability, XLR connector with self-locking design has been tested plug and pull over 15,000 times, It is heavy, resistant to deformation and rust, and improves signal performance without worrying about signal deterioration over time.. Heavy Duty 24K gold-plated XLR and 6.35mm Connectors it could eliminate signal loss and static noise, provide durability and improve signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality. the outer diameter of the cable is 6.0mm0.24 inch, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, strong, flexible and durable.. Yumiwoow offer 12 months warranty for this Jack 6.35mm Male to XLR Male Patch Cord. Please feel free to contact us for a replacement if it has any quality issue within warranty..

14 inch TS mono to XLR male microphone cable for connecting devices that use 6.35mm TS connectors e.g., electric guitars, keyboards, basses, etc. to devices that use XLR female connectors e.g., mixing consoles, audio interfaces, amplifiers, etc.. It is designed for connecting unbalanced 6.35mm mono output devices to XLR input devices... This xlr to 14 cable with 20 AWG 4N Oxygen Free Copper, multiple layers of shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity.great choice for music lover, It's especially great for studio or live performances.. This 14 to XLR cable with heavy-duty 24K gold-plated XLR and 6.35mm connectors that eliminate signal loss and static noise, providing durability and improved signal transmission, and a copper shell that blocks any interference and prevents loss of sound quality.. This instrument cable to xlr cable features a heavy-duty flexible rubber and nylon braided jacket that protects the inside of the cable and enhances tensile and abrasion resistance. The cable has an outside diameter of 6.0 mm 0.24 inches and is made of environmentally friendly materials, with polyethylene insulation for improved high frequency response, strong and flexible.. COMPATIBILITY Compatible with devices amplifiers, mixers, musical instruments, microphones, DJ equipment, etc. with 3-pin xlr jacks and 6.35mm mono jacks Connect output signals from electric guitars, basses, keyboards, and other instruments to a mixing console or audio interface. In some cases, it can also be used for connecting equipment in home recording or small gigs..

Wide CompatibilityXLR Male to 14 6.35mm TRS Mono Jack Microphone Cable, compatible with equipments with 3-pin XLR connectors and 6.35mm socket such, Use to connect a high quality microphone to a mixer or guitar amplifier, Available devices Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier etc.. Excellent Sound QualityMale XLR to 14 Inch 6.35mm TRS Mono Jack Microphone Cable, has amazingly excellent clarity and the highest noise and radio frequency interference cancellation. The 3-core XLR cable design is known for greatly improving noise suppression, reducing noise by 95. Process AssurancePure Copper and Plated Conductors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer The right size, they always fit correctly, never too tight or too loose.. Flexible and DurableHeavy Duty Flexible PVC Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch,high durability. The thick copper braid is highly elastic.Cotton Yarn wrap reduces noise.made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable.. In the Box2 pack, 6.6 FT XLR Male to 14 TRS Mono Jack Microphone Cable with Black and white grid layer.

Professional-Grade Locking Mechanism This 14-inch TRS female to 3-inch XLR male audio adapter features a unique locking 14-inch TRS 6.35 mm female connector. Unlike standard adapters that are prone to loosening or accidental detachment, its locking design securely holds the cable in place, effectively preventing vibration. This ensures smooth signal transmission and eliminates crackling caused by poor contact during critical performances or recordings. Using this 14-inch TRS female to 3-inch XLR male audio adapter, you can convert the XLR female inputs of mixing consoles, sound cards, power amplifiers, and other equipment to locking 14-inch TRS female inputs. It can also convert 14-inch audio cable plugs to 3-inch XLR male plugs, adapting to a wider range of devices through interface conversion. High-Fidelity Balanced Audio Transmission This 14-inch to XLR adapter is designed for balanced connections, converting 14-inch TRS signals to a 3-inch XLR configuration. By maintaining a balanced path, it effectively suppresses electromagnetic interference and noise during long-distance transmission, providing clear, professional audio for studio monitors, microphones, and high-end audio systems. Rugged and Durable Die-Cast Construction This adapter features a robust zinc alloy housing with a black baked-on finish, capable of withstanding harsh environments on stage, in the studio, and while traveling. The robust housing protects the internal circuitry from impacts, while the corrosion-resistant plating ensures durability and a premium feel. High-Purity Copper Alloy Connectors The contacts and terminals are made of high-quality copper alloy and nickel-plated. This ensures superior conductivity, minimal signal loss, and reliable performance after thousands of mating cycles. Ensuring audio integrity from source to output. Versatile Studio Connectivity This dual-interface connector, only 83mm long, is an essential tool for connecting devices. You can easily connect mixers with XLR inputs, audio interfaces, and active speakers to devices with 14-inch TRS outputs, or convert 14-inch cables to standard XLR microphone cables to expand compatibility.

Professional XLR Plugs 14 TRS Male to XLR 3-PIN Male adapter,14 TRS Male to XLR Female Adapter,Compact design with sturdy die-cast shell , attractive and durable XLR Coupler.The Housing for high strength Zinc Alloy die-casting nickel plating, attractive and durable,The XLR Connector is a high quality metal shielded type with positive locking into the microphone.. XLR Adapter does not require special tools or complex settings Extend XLR Cables in a convenient and economical manner.Protective shielding to prevent noise from radio frequency RF and electromagnetic interference EMI.. Male to Male Connector and Male to Female Coupler You can convert an XLR female input into an XLR male output or convert an XLR female output into an XLR male input.. Designed to change an XLR output into an XLR input This XLR male to female XLR male to male adapter Compatible Microphone,Mixer,DMA controllers and other audio devices.. Great Backup2-Pair of 14 TRS Male to XLR Male TRS Male to XLR Female connectorSlim profile that's great for travel, at home, or at the officewhich can save you much and makes you always have a Backup..

Excellent Sound Quality Stable TransmissionThis 10FT TRS 6.35mm 14 Inch to XLR 3 Pin Male Balanced Interconnect Audio Cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity.. Wide Compatibility The XLR to Quarter Inch cable is compatible with the equipment with 3 pin XLR connectors and 6.35mm socket such as Mixer, Camera, Amplifier, Sound box, Power Amplifier, frequency divider, voltage limiter, digital decoder, Audio Sound Console and Stereo System and more.. High Durability Flexibility Yumiwoow XLR to 6.35mm cable is made of softNylon braided heavy duty jacket to ensure flexibility and durability, XLR connector with self-locking design has been tested plug and pull over 15,000 times, It is heavy, resistant to deformation and rust, and improves signal performance without worrying about signal deterioration over time.. Heavy Duty 24K gold-plated XLR and 6.35mm Connectors it could eliminate signal loss and static noise, provide durability and improve signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality. the outer diameter of the cable is 6.0mm0.24 inch, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, strong, flexible and durable.. Yumiwoow offer 12 months warranty for this Jack 6.35mm Male to XLR Male Patch Cord. Please feel free to contact us for a replacement if it has any quality issue within warranty..

Tisino Balanced 14 to XLR Male Cable, This TRS to XLR Cable is designed to convert a balanced 14 TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. XLR pin 1 is connected to the 14 plug sleeve, XLR pin 2 is connected to the 14 plug tip, XLR pin 3 is connected to the 14 plug ring.. This Male XLR to 14 cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.. With Heavy Duty 24K Gold-plated XLR and 6.35 mm connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality.. Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, strong, flexible and durable.. Despite multiple layers of shielding and insulation put in place for maximum noise isolation, this patch cable's construction remains very flexible, doesn't get tangled, and is easy to coil at the end of your gig. It comes with a re-usable velcro strap to keep it organized and tight when not in use..

Excellent Sound Quality Stable TransmissionThis 3.3FT TRS 6.35mm 14 Inch to XLR 3 Pin Male Balanced Interconnect Audio Cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity.. Wide Compatibility The XLR to Quarter Inch cable is compatible with the equipment with 3 pin XLR connectors and 6.35mm socket such as Mixer, Camera, Amplifier, Sound box, Power Amplifier, frequency divider, voltage limiter, digital decoder, Audio Sound Console and Stereo System and more.. High Durability Flexibility Yumiwoow XLR to 6.35mm cable is made of softNylon braided heavy duty jacket to ensure flexibility and durability, XLR connector with self-locking design has been tested plug and pull over 15,000 times, It is heavy, resistant to deformation and rust, and improves signal performance without worrying about signal deterioration over time.. Heavy Duty 24K gold-plated XLR and 6.35mm Connectors it could eliminate signal loss and static noise, provide durability and improve signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality. the outer diameter of the cable is 6.0mm0.24 inch, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, strong, flexible and durable.. Yumiwoow offer 12 months warranty for this Jack 6.35mm Male to XLR Male Patch Cord. Please feel free to contact us for a replacement if it has any quality issue within warranty..

Perfect Compatibility This XLR to 14 Inch 6.35mm Cable is designed to convert a balanced XLR output to a 14 TRS input, which is suitable for connecting many types of audio equipment with XLR connector and 14 inch TRS jack. This xlr to trs is usually used for active speakers as a speaker leads, carrying the audio signal from mixer to speaker. Available devices Microphones, Audio Sound Consoles, Power Amplifier, Stereo System, Wireless Microphone Receiver ,etc.. 24AWG OFC Design Use 24AWG OFC conductor with double shielding, foil shielding and metal braid shield to provide prinstine sound, noise shielding, no noise.. Nature Sound Bezokable xlr to 14 adapter use gold-plated 6.356.5mm adapters and silver-plated 3-pins to provide hi-fi sound quality. We also add a Anti-jamming magnetic ring which can anti-interference and filtering functions, ensures the stable signal transmission without loss, provide Hi-Fi sound quality.. Soft Durable Nylon Braided Cable This male xlr to 14 cable use high quality material of nylon braided cable, which is more soft, durable and beautiful. Easier to clean. Provide longer service life than normal cables.. What You Get 2 packs 14 to xlr male 10feet. Bezokabel is a professional manufacturer focusing on cables, all of our products has after-sale service, so please feel free to contact us if you have any problem about this xlr to 6.356.5mm microphone cable..

This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 14 TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications.. High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound.. Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise.. The XLR connector is a high quality metal shielded type with positive locking into the microphone The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability.. XLR pin 1 is connected to the 14 plug sleeve, XLR pin 2 is connected to the 14 plug tip, XLR pin 3 is connected to the 14 plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..

Flexible and Durable The HUALEU micphone cable features a flexible rubber jacket that provides maximum flexibility and durability, ensuring reliable performance even in demanding environments.. Reliable Connection The gold-plated brass connectors offer a reliable connection and enhanced corrosion resistance, ensuring a stable audio signal transfer.. Heavy-Duty Construction The connector housing is made of heavy-duty zinc alloy, providing excellent durability and protection against external damage.. High-Quality Conductor The cable is equipped with a 20 AWG 6N silver-plated copper conductor and a 95 coverage tin-plated copper braided shield, delivering superior audio quality and minimizing signal interference.. Wide Compatibility This micphone cable is suitable for various applications, including audio mixers, microphones, electric guitars, and other musical instruments, allowing for seamless interface conversion..

XLR male to 14 6.35mm TRS Mono Jack Microphone Cable, compatible with equipments with 3-pin XLR connectors and 6.35mm socket such, Use to connect a high quality microphone to a mixer or guitar amplifier, Available devices Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier etc.. male XLR to 14 Inch 6.35mm TRS Mono Jack Microphone Cable, has amazingly excellent clarity and the highest noise and radio frequency interference cancellation. The 3-core XLR cable design is known for greatly improving noise suppression, reducing noise by 95. 24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer The right size, they always fit correctly, never too tight or too loose.. XLR male to 14 6.35mm TRS Mono Jack Microphone Cable, compatible with equipments with 3-pin XLR connectors and 6.35mm socket such, Use to connect a high quality microphone to a mixer or guitar amplifier, Available devices Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier etc.. Heavy Duty Flexible PVCJacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch,high durability. The thick copper braid is highly elastic.Cotton Yarn wrap reduces noise.made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable..

Specification This balanced 14inch to 3pin XLR Male cable is 6.6FT long. The wire is nylon braided, it's strong and heavy duty. 14inch plug is gold plated, signal can go through gold plated plug with less lose. This TRS plug is also drag-proof design, the plug tail will hold the wire tightly, so the wire won't be pulled out easily. With drag-proof design, the cable can last much longer. It's also strong enough for long distance transmission.. Noise Free This TRS to XLR male cable is full covered with spiral OFCoxygen free copper inside. Under the OFC shield, there is aluminum foil. With this two layer, the cable can keep out RFI and EMI efficiently. You don't need to worry about hum or buzz any longer. Anyway, we do not suggest to put this cable over adapters, plugs, and others which put out heavy RFI and EMI.. Not Use for Guitar This quarter inch to XLR male cable doesn't have impedance matching transformer inside, it's not suitable for High-Z output instrument like guitar and bass. Guitar and bass signal should go into 14 instrument jack, but not XLR jack. 14inch TRS male to XLR male cable is usually used on mixer, audio interface, preamp, speaker, studio monitor, etc.. Package Items The package include two 6.35mm to XLR male cable, each cable is 6.6 feet long. One cable has red rings and the other has blue rings, with different color rings, you will not insert the connector into wrong jack by mistake.. 2-year Warranty Each cable will be tested carefully before packing. We offer 2-year warranty for each of them. If the cable meet any problem within the warranty, you don't have to wait for long for return and repair. We'll arrange new cable for replacement once the issue confirmed..

This 30FT TRS 6.35mm 14 Inch to XLR 3 Pin Male Balanced Interconnect Audio Cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity.. Twozoh XLR to 14 Inch Instrument Cable with Heavy Duty 24K Gold-plated XLR and 6.35 mm connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission.. Heavy Duty Flexible Rubber and Braid Jacket Protect Your Cable, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, strong, flexible and durable.. The XLR to Quarter Inch cable is compatible with the equipment with 3 pin XLR connectors and 6.35mm socket such as Mixer, Camera, Amplifier, Sound box, Power Amplifier, frequency divider, voltage limiter, digital decoder, Audio Sound Console and Stereo System and more.. Twozoh offer 12 months warranty for this Jack 6.35mm Male to XLR Male Patch Cord. Please feel free to contact us for a replacement if it has any quality issue within warranty..

Good Product Compatibility This DETAME balanced XLR Male right angle 14-inch TRS audio cable features oxygen-free copper conductors and is coated with aluminum foil and copper braided shielding to provide excellent signal transmission and minimize interference. This 6.35mm 14-inch TRS right-angle-turn XLR male cable allows you to connect the mixer's balanced 14 output interface to the XLR input interface of the power amplifier, or the electric guitar 14 output interface to the XLR input interface of the mixer using two identical cables. Premium Conductors for Superior Sound Features oxygen-free copper conductors with aluminum foil and copper braided shielding for exceptional signal transmission and minimal interference. Durable Flexible Design Reinforced with a braided jacket and a slim 6mm outer diameter for maximum flexibility and long-lasting performance in professional setups. Gold-Plated Reliable Connectors Equipped with corrosion-resistant gold-plated 14 TRS and nickel-plated XLR connectors for optimal conductivity and reduced signal loss. Heavy-Duty Zinc Alloy Housing Robust zinc alloy casing on both XLR and 14 plugs ensures durability, shielding against interference, and resistance to daily wear. Wide Compatibility Convenient Lengths Perfect for connecting mixers, amplifiers, microphones, and instruments e.g., electric guitars. Length3Feet.

Support data and audio signal transmission-Female XLR to 14 Inch 6.35mm TS Mono Jack Microphone Cable, has amazingly excellent clarity and the highest noise and radio frequency interference cancellation. The 3-core XLR cable design is known for greatly improving noise suppression, reducing noise by 95cy interference cancellation. The 3-core XLR cable design is known for greatly improving noise suppression, reducing noise by 95. Balanced Shielded Wire-XLR cable 3-core outer braided oxygen-free copper shield and aluminum shield. Male XLR to 14 Inch 6.35mm TS Mono Jack Microphone Cable,, gold-plated connectors. Ensure the smooth transmission of data and audio signals.. High Quality-These cables use thick wires, gold-plated connectors and solid connector shells. XLR Female XLR to 14 Inch 6.35mm TS Mono Jack Microphone Cable, continue our tradition of providing the highest quality cables at the best prices.. Multi-purpose-XLR Female to 14 inch 6.35 mm TS mono jack microphone cable, suitable for professional stage lighting instruments, moving head lights, par light spotlights, and various types of XLR input and output Musical instrument. Such as microphone, effector, mixer, equalizer, DMX LED, electronic organ, amplifier, electric guitar. Suitable for concert halls, schools, churches, studio lighting and recording, and many other professional audio settings..

Hi-Fi Sound Quality - This xlr to 14 cables use 24AWG oxygen-free copper conductors, copper braid, and double shielding Foil shielding and Copper braided shielding, maximizing resistance to external interference, providing maximum conductivity and signal clarity. Premium Durability - EBXYA 14 TRS to XLR is more flexible and durable than other XLR cables. Our XLR to TRS Cable with PVC sheath is easy to use and store. XLR to 14 cable can withstand bend tests of 10000 times, is 10 times durable more than normal, and longer life. Professional 14 to XLR Cable - EBXYA XLR Male to 14'' TRS is made of a self-locking design that is easy to plug and unplug. XLR cable adopts heavy-duty metal connectors and gold-plated pins design, helping to ensure a higher quality of sound. Wide Compatibility - Balanced XLR Male to 14 Inch cable designed for XLR female connectors to equipment with a 14 inch TRS jack, widely used as signal cables at studio recording, amplifiers, mixers, guitars, and so on. Enjoy music life at any time. Worry-Free Service - This package has xlr male to 14'' 3ft 2 Pack, We strive to provide customers with satisfactory products and services, if you have any questions about our products, please feel free to contact us, and we will reply to you ASAP.

Ultra Durable Flexible Design 3.3FT XLR to 6.35mm plug uses gold plated, good electrical conductivity, oxidation resistance and wear resistance, plug and pull tests to 15000 times Heavy, No deformation rust.. Stable Transmission High strength aluminum alloy die-cast housing. Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable, provides maximum cancellation of hum and noise.. Wide Compatibility XLR Male to 14 inch 6.35mm TRS cable compatible with equipments with 3 pin XLR connectors and 6.35mm socket such as Mixer, Amplifier, Guitar, Soundbox, Power Amplifier.. Usage Scenario Twozoh XLR to TRS 6.35mm Cable. Widely used as signal cables at studio recording, live house, professional sound reinforcement, home theater and other environment.. Quality Assurance Twozoh offer 12 months warranty for this cable. Please feel free to contact us for a replacement if it has any quality issue within warranty..

20 AWG 6N Silver-Plated Copper Conductors The XLR male to 14 TS Right Angle cable uses high-quality 20 AWG 6N silver-plated copper conductors, which provide excellent electrical conductivity and signal clarity. These conductors are carefully twisted to reduce signal loss and enhance the overall performance of the cable. Since this XLR cable uses 20AWG silver-plated copper and a higher density braided shield, it makes this 14 to xlr audio cable thicker and more stable in signal transmission. It may also make this cable It's not that soft to bend.. Tin-Plated Copper Braided Shielding The 6.35mm to XLR Male cable is shielded with a tin-plated copper braided shielding layer, which effectively protects against interference and noise. This shielding layer helps maintain the integrity of the signal and prevents signal degradation over long distances.. Gold Plated Connectors The 14 connectors of this xlr to 14 cable are gold plated, providing a reliable and corrosion-resistant connection. Gold-plated connectors are resistant to oxidation and corrosion, ensuring a long-lasting connection between devices. The XLR connector has thick silver-plated pins, which has excellent transmission effect and is corrosion-resistant and oxidation-resistant. The connector shell is made of heavy-duty metal shell and is painted black.. Good compatibility This gold-plated 14 to XLR Male audio cable has good compatibility and can be connected to active speakers, mixers, electric guitars, microphones and other equipment. This cable adopts a balanced connection method.. Flexible and Durable The cable is flexible and durable, making it easy to handle and use. It is suitable for a wide range of applications, including audio recording, DJing, live performances, and home theater setups..

Designed for musicians and audio engineers, this 6.35mm TRS to XLR cable delivers balanced stereo signal transmission with zero noise interference. Perfect for connecting electric guitars, keyboards, microphones, and mixers to amplifiers or speakers for studio recordings or live performances.. Dual-Shielding Against InterferenceFeatures Belden 1813A professional-grade cable with bare copper braided shielding foil layer, effectively blocking EMIRFI disturbances. Ensures pristine audio clarity even in high-interference environments like stages or crowded studios. Equipped with gold-plated TRS and XLR connectors for corrosion-resistant, high-conductivity contact. The thick PVC jacket 0.055 inches withstands touring abuse, built for long-term use. Works seamlessly with bass guitars, keyboards, speakers, EQs, and mixing consoles. The 2FT 60cm length provides flexible setup options for pedalboards, rack systems, or desktop audio interfaces without cable clutter. Package 2-pack 6.35mm 14 Inch TRS to XLR Cable.

Professional balanced transmission, rejecting noise interference Features a standard balanced 14 6.35mm TRS to dual XLR male connector design, effectively suppressing electromagnetic interference during long-distance transmission to ensure clean, lossless audio signals for studio recording and live performances.. Stereo Splitter for Flexible Dual Connections Splits a single stereo TRS output from a mixer or audio interface into two independent XLR mono signals. Ideal for routing stereo outputs from DJ gear or players to leftright channel amplifiers or PA speakers, enabling rapid stereo system setup.. Wide compatibility with professional gear, plug-and-play Works with any device featuring balanced TRS outputs e.g., mixer main outputs, audio interface line outputs. Dual XLR male connectors on the other end easily connect to XLR-input speakers, amplifiers, or recorders without additional adapters.. Built for live use with high-durability materials Thickened shielding and pure copper core wires ensure stable signal transmission. Silver-plated connectors resist oxidation and withstand frequent pluggingunplugging, complemented by a metal housing. Ideal for high-frequency use scenarios like stage touring and fixed installations, delivering lasting reliability.. Multi-scenario application, one-stop solution for signal distribution Perfectly suited for live sound reinforcement, studio monitoring, multi-track recording, live streaming audio routing, and more. For example Send one channel from the mixer's main output to the main PA speakers while simultaneously routing another channel to recording equipment, enabling simultaneous performance and recording..

Support Stereo and Mono SoundThis product is designed as a XLR male head to 14 inch 6.35mm Cable, supporting Stereo and Mono, outputting high-quality sound and bringing you a wonderful experience. OFC to Effectively Signal TransmissionThis cable design uses high-purity 4N OFC conductors, with double-layer foils copper foil and aluminum foil to prevent negative effects from EMI and RFI, effectively protecting Signal Transmission, reducing distortion and signal loss. Wide ComptibilityThis product is designed with 14 6.35 mm Female to XLR male Cables, compatible with both Stereo TRS and MonoTS, and can be used for connecting Audio Electronic Devices such as Microphones, Amplifiers, Speakers, Saxophones, Electronic organs, and Guitars. Molded Stress to Support MicrophoneThe XLR connector adopts a design with molded stress relief function, which can safely support the weight of the microphone and bring you a wonderful experience. Two Color Cable for UseThis product comes with 2 sets, 1 set in blue and 1 set in red, for the convenience of external devices to bring you a better user experience.

with Gold Contact 14 TRS XLR Female Connects. Neglex Studio Quad Cable. Audio Cable. 10' Long.

Widely Application The XLR cables are perfectly compatible with equipment has 3-pin connectors such as microphones, stage lighting, DMX lamps, mixing boards, power amplifiers, studio harmonizers, speakers, patch bays and so on. In addition, these microphone cables are widely used at stage speakers, club stages, KTV, and home theater. 120 Ohm impedance.. Professional Quality20AWG 4N Oxygen Free Copper with shielding, Foil shielding and metal braid shield eliminate interference, deliver pristine sound, No hum, no noise, crystal clear music. High quality noise free performance,great choice for music lover, It's especially great for studio or live performances.. Stable Connection Our microphone cables uses heavy-duty zinc alloy housing, pure copper silver-plated XLR pins, self-locking male to female connector design, this xlr speaker cables can provide a stable connection between devices with an XLR interface, easy plugging unplugging. Multi-purpose-XLR Female to 14 inch 6.35 mm TRS mono jack microphone cable, suitable for professional stage lighting instruments, moving head lights, par light spotlights, and various types of XLR input and output Musical instrument. Such as microphone, effector, mixer, equalizer, DMX LED, electronic organ, amplifier, electric guitar. Suitable for concert halls, schools, churches, studio lighting and recording, and many other professional audio settings..

Double shielding Strong Anti-interference AbilityXLR cable adopts real 24AWG oxygen free copper conductor, adopts new weaving technology, high quality aluminum foil shielding is adopted, so as to eliminate shaking noise, trampling noise and electrostatic sound interference. It has excellent noise barrier, and Microphone Cable can provide you with high-definition audio transmission.. Durable Flexy Nylon BraidedThe Microphone Cable adopts nylon braid, not only makes the Mic Cable more soft and flexible, also makes you notice it at a glance among many black cables, which is no longer dazzled in many cables.. Heavy Duty Metal ConnectorsThis XLR Microphone Cable is equipped with professional connectors. It is made of heavy alloy and has molded stress relief and frosted texture. It is durable. At the same time, we have undergone a lot of plug-in tests when manufacturing to ensure that each plug can adapt to the standard jack, and the plug-in process is also very easy and neat.. Wide CompatibilityThe connectors are perfectly compatible with equipments with 3-pin XLR such as Microphones, AmplifierMixer, power amplifiers, Recording StudioStudio Harmonizers, Speaker Systems, Patch Bays and Stage Lighting and so on. These XLR microphone cables can be widely used in stage performances, clubs, bar performances, KTV and home recording. There are a variety of lengths for you to choose, suit, single strip, etc. you can choose according to your needs.. Strong Transmissibility Silver plated XLR pins and Nickel plated TRS improves the transmission performance of Mic Cord and ensures the durability and reliability. The advanced configuration enables to be used in harsh environments without any impact..

Professional XLR Plugs ,3-Pair Balanced 14-inch TRS to XLR adapter,converts a 14-inch input into an XLR male output and 14-inch input into an XLR female input, Compact design with sturdy die-cast shell , attractive and durable XLR coupler.The Housing for high strength zinc alloy die-casting nickel plating, attractive and durable,The XLR connector is a high quality metal shielded type with positive locking into the microphone.. Plug and Play - Designed to conform to the international standard of 6.35mm 14 Inch TRS to XLR Adapter audio connectors, providing reliable transmission of audio frequencies with an all-metal construction that ensures a loss-less transmission signal, as well as protective shielding for RF and EMI noise elimination.This XLR adapter does not require special tools or complex settings,Extend XLR cables in a convenient and economical manner.. XLR Adapter 6 Pack ,3 pcs XLR male to 14 inch Connector and 3 XLR Female to 14 inch Connector. you can convert an XLR female input into an 6.35 male output or convert an XLR male output into an 6.35mm male input.. Wide CompatibilityWide Compatibility XLR to 14 inch adapter is compatible with mixer, speaker and other audio devices with TRS and XLR port.. Package include 3-Pair x 6.35mm TRS Male to XLR Male 6.35mm TRS male to XLR female connectorSlim profile that's great for travel, at home, or at the officewhich can save you much and makes you always have a backup..

Hi-Fi AUDIOPHILE'S GOSPEL - Devinal Professional 14-inch TRS to XLR Male cables are designed for high-quality audio signal transmission in recording studios, home studios, and live performances. Perfect for connecting mixers to active speakers and other professional audio equipment, these cables deliver PRO construction, PRO shielding, and PRO sound quality a true gospel for Hi-Fi music enthusiasts.. Hi-Fi GRADE CONSTRUCTION - Featuring 20 AWG silver-plated 6N 99.9999 oxygen-free copper conductors, these balanced XLR-to-14-inch cables ensure high-fidelity sound reproduction with maximum conductivity and signal clarity.. Hi-Fi GRADE SHIELDING - Multi-layer shielding technology combines 96-strand silver-plated copper braided mesh, aluminum foil shielding, and cotton wrapping for exceptional noise isolation and interference protection.. Hi-Fi GRADE DURABILITY - Built to last with heavy-duty environmentally friendly PVC jackets, reinforced metal housing, and 24K gold-plated XLR14-inch connectors. This robust design maintains signal integrity while ensuring flexibility for professional use.. PRO GRADE WARRANTY - Backed by a lifetime customer support and 1-year free replacement. Invest in pristine audio quality and elevate your music experience..

Professional Balanced Audio Cable This HUALEU 14 inch TRS to XLR male cable is engineered to convert a balanced 14-inch TRS output to a balanced XLR input. It is ideal for use as a speaker lead to transmit high-quality audio signals from a mixing console to powered speakers or power amplifiers, ensuring clean and noise-free sound transmission. Superior Shielding for High-Fidelity Sound Constructed with a dual-layer shield of copper and aluminum foil, along with 4N Oxygen-Free Copper OFC conductors, this cable guarantees maximum conductivity and exceptional signal clarity. This advanced construction minimizes electromagnetic interference EMI and radio-frequency interference RFI for pristine, high-fidelity audio reproduction, making it a perfect choice for studios and live performances. Premium Gold and Nickel Connectors Features 24K gold-plated 6.35mm TRS connectors and nickel-plated XLR connectors. The gold plating prevents oxidation, eliminates signal loss and static noise, while the robust nickel-plated connectors provide superior durability and improved signal transmission for reliable, long-term use. Rugged and Flexible Build for Longevity The 14 6.3mm TRS to XLR Male cable is protected by a heavy-duty, flexible rubber jacket with a high-density braided sheath, offering excellent durability and kink resistance. A zinc alloy connector housing effectively blocks external signal interference, and the molded strain relief design supports the weight of your equipment, preventing damage to the cable core from pulling or bending. Optimized Internal Construction The XLR Cable internal polyethylene insulation layer improves high-frequency response, contributing to a wider and more accurate sound range. With a generous outer diameter of 6.0mm 0.24 inches, this XLR Male to 14 TRS cable is built to be both incredibly sturdy and highly flexible, offering the perfect balance for demanding professional environments.

Made of high purity ofc conductor 14 to XLR Cable use good quality oxygen free copper with shielding ensuring high fidelity sound quality and providing maximum's conductivity and durability. It's especially great for studio or live performances. Double-shielded 6.35mm TRS to XLR Male cable constructed with double-layers of shielding high density bare copper braid shielded aluminium foil minimize signal interference and ensure the transmission stable, provides maximum against electro magnetic interference emi and radio frequency interference rfi. Incredibly durable With a 10000 bend lifespan several times longer than xlr cables,premium metal housing and durable, high purity ofc internally, rohs pvc environmentally friendly materials and nylon braid externally, against scratching and abrasion, prolonging it's service life. Usage Scenario XLR to TRS 6.35mm Cable. Widely used as signal cables at studio recording, live house, professional sound reinforcement, home theater and other environment.. Quality AssurancSZLliyxs is committed to provide consumers with high-quality cables and better after-sale service. All of our cable provide 1-years after-sale service. If you have any problems, please feel free to contact us via Amazon..

-Reliable and high-quality XLR Male to 14 Inch adapter from HUALEU 2Pack. -Designed with a sturdy metal casing and rivet installation for a screw-free and durable design,Balanced connection mode, good compatibility. -Features a standard 14 inch stereo port and a 3PIN-XLR male port,Widely used in mixers, microphone cables, microphones, audio players, power amplifiers and other equipment. -Ideal for connecting microphones, mixers, amplifiers, and other audio equipment with ease. -Easy to use and portable, perfect for both professional and home recording studios.

Professional Balanced Connectivity Engineerts to deliver pristine audio transmission between professional equipment with balanced XLR outputs and balanced 14 TRS inputs. Ideal for connecting mixers, audio interfaces, amplifiers, and active subwoofers in studio, stage, and live sound applications.. 90 Angled Design for Space Saving Durability Features 90-degree angled 6.35mm plug, designed to prevent cable strain and accidental disconnections in tight setups. This smart right-angle design enables clean cable management behind gear and significantly extends the cable's lifespan.. Multi-Shielding for Crystal-Clear Audio Utilizes oxygen-free copper conductors combined with advanced aluminum foil and woven copper braid shielding. This dual-layer protection effectively blocks 99.99 of electromagnetic interference, ensuring pure, noise-free, high-fidelity sound reproduction.. Rugged Professional Build Built to withstand rigorous use with heavy-duty metal connectors, 24K gold-plated contacts for superior corrosion resistance, and a flexible yet robust braided jacket. The premium construction, as seen in the vivid red and gold design, ensures reliable performance night after night.. Complete Package with Reliable Support Includes 1 x SOUNDFAM Balanced XLR to 14 TRS Cable, backed by an 18-month worry-free warranty and friendly customer support. We are committed to delivering professional-quality audio solutions that connect your passion to performance..

2-Pack 3-Feet AudioPatchStageRecording CablesTwo-Pack XLR male to gold-plated 14-inch TRS right-angle audiopatchrecordingstage cables Total length of each cable including the length of connectors 3 feet. Gold-Plated for Signal Transparency14-inch TRS connectors gold-plated for signal transparency, durability and dependability. Cables with Pure Oxygen-Free Copper WiresComprising audio signal wires made of pure oxygen-free copper OFC conductors for signal clarity and the audio signal transmission integrity. Protective Connector Metal Housing and Ultra-Soft PVC JacketConfigured with ultra soft flexible PVC jacket and all protective connector metal housing for maximum durability, reliability, easy installation, and dependability. Effective EMI and RFI RejectionConfigured with spiral signal shield made of oxygen-free copper OFC for flexibility and effective EMI and RFI rejection.

The AxcessAbles TRS 14-inch 6.35mm stereo balanced instrument cable to male XLR connection offers premium-grade oxygen-free copper core, ensuring superior quality and performance. With 2-feet in length, it provides ample reach for your equipment requirements, delivering optimal results.. Our cable is thoughtfully designed with high-quality heat shrink tubing, which offers superior tug protection to ensure long-lasting durability and reliability throughout its lifespan.. Our line of cables features top-tier metal plugs, renowned for their exceptional quality, tight and robust connections, and unwavering dependability even with prolonged use. The casings are designed to securely tighten, providing added strength and reliability.. AxcessAbles color-coded cables are perfect for efficient identification and organization purposes. The use of distinct colors allows for quick and easy recognition, making it simple to differentiate between various cables and streamline your setup.. The TRS 14-inch 6.35mm stereo balanced male to female XLR connection is a versatile audio cable for instruments, studios, and various applications. It enables balanced audio connections, links line-level devices, connects effects loops, patches audio systems, and ensures high-quality balanced audio transmission.. AxcessAbles provides a 1-year warranty, ensuring customer satisfaction. Our US-based support team is here to assist you with any technical issues or inquiries you may have..

Easy Connection Connects any audio device with XLR input with 14 inch TRS jack. High Quality Sound gold plated connector ensures minimum signal loss transfer and high quality sound. Durable Design PVC flexible jacket, oxygen free copper and bare copper braided shielding prolong the life span of this cable. XLR to Stereo Audio Provides an easy to transfer signal from 14 inch jack to professional XLR enabled devices. What you get 6.35mm to XLR cable with JD 1-Year Limited Warranty.

PROFESSIONAL 14 TRS TO XLR CABLE 2-PACK Premium balanced audio patch cables with male TRS 14 inch to male XLR 3-pin connectors - perfect for connecting audio interfaces, mixers, studio monitors, and microphones in professional recording and live sound applications. 24K GOLD-PLATED CONNECTORS FOR SUPERIOR SIGNAL Corrosion-resistant gold-plated contacts ensure reliable connections and pristine signal transmission - 4N oxygen-free copper conductors with dual shielding eliminate interference for crystal-clear audio quality. HEAVY-DUTY CONSTRUCTION WITH FLEXIBLE PVC JACKET Durable polyvinyl chloride jacket prevents kinking, twisting, and tangling while maintaining flexibility - robust metal connectors withstand repeated use in professional studio and live performance environments. BALANCED AUDIO DESIGN ELIMINATES NOISE AND HUM Advanced shielding with foil and braided metal shield blocks electromagnetic interference - delivers high-fidelity sound reproduction with no signal loss or degradation for professional audio applications. COMPACT 1-FOOT LENGTH FOR CLOSE CONNECTIONS Perfect short cable length for patch bay connections, desktop studio setups, and equipment racks - includes red and black cables for easy identification in complex audio routing configurations.

PROFESSIONAL 14 TRS TO XLR CABLE 2-PACK 2-foot balanced microphone patch cables with male TRS 14 inch to male XLR 3-pin connectors - perfect for connecting mixers, amplifiers, studio monitors, and powered speakers in professional audio setups. 24K GOLD-PLATED CONNECTORS FOR CRYSTAL CLEAR SOUND Oxygen-free copper conductors with bare copper braided shielding eliminate hum and interference - gold-plated contacts resist corrosion ensuring reliable signal transmission for pristine audio quality. HEAVY-DUTY CONSTRUCTION FOR STUDIO AND STAGE 20 AWG wire gauge handles professional audio levels - zinc alloy die-cast housing with flexible rubber jacket withstands extreme temperatures from -35C to 105C for reliable performance. BALANCED AUDIO DESIGN ELIMINATES NOISE Shielded balanced construction delivers high-fidelity sound without signal loss or jitter - polyethylene insulation improves high-frequency response for detailed, natural audio reproduction in recording applications. VERSATILE COMPATIBILITY WITH PRO AUDIO GEAR Works perfectly for studio monitors, karaoke systems, acoustic guitars, mixers, microphones, and amplifiers - 2-foot length ideal for equipment connections and cable management in home studios.

Ream connectors for superior signal transfer rugged durability. 24 AWG Oxygen-Free Copper OFC Conductors for Enhanced signal clarity. 90 percent OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility.

Studio-Grade Balanced Audio Performance This XLR Female to 14 TRS male balanced cable delivers professional-grade signal integrity, perfect for connecting condenser mics to mixers or synths to audio interfaces. Featuring gold-plated 3-pin XLR and TRS connectors, it ensures noise-free transmission even with 48V phantom power. Ideal for podcasting, live sound, and studio recording.. Road-Ready Durability for Demanding Gigs Our XLR audio cable is built to withstand the rigors of touring and daily studio use. Its heavy-duty nylon braided jacket, reinforced strain relief, and secure XLR locking mechanism prevent tangled wires and connection drops during critical performances. Perfect for sound systems, DJ setups, and mobile recording rigs.. Crystal-Clear Audio with Advanced Shielding Engineered with high-purity oxygen-free copper conductors and dual-layer shielding, this XLR to 14 TRS microphone cable eliminates hum, RF interference, and signal loss. Whether recording vocals, connecting studio monitors, or running live sound, enjoy pristine audio with zero compromise.. Universal Compatibility for Any Setup The balanced 6.35mm TRS plug adapts to both balanced and unbalanced inputs, making this XLR to 14 adapter cable a must-have for home studios, pro audio rigs, and stage performances. It works flawlessly with audio interfaces, electronic drums, and PA systemsno extra converters needed. Convenient Tangle-Free Storage Each mic cord comes with a compact protective box, keeping your setup organized in gig bags or studio drawers. Musicians, podcasters, and sound engineers can stay ready for action, whether on tour or recording at home..

Balanced cables have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal.. Prevents ground loop issues.. XLR to 14 TRS balanced pro audio cables provide high fidelity and eliminate noise in the recording studio and on the stage.. Our new Permier Series cables up the ante in terms of construction quality and performance..

26AWG conductors with aluminum foil shielding. Eight balanced mono or unbalanced stereo lines with color-coded wires. 14 TRS plugs on one and end XLR male plugs on the other end. Quality at a Fair Price Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices..

Buy with confidence with Monoprice Lifetime on all cables, you can rest assured we stand behind our products and our customers. 26AWG conductors with aluminum foil shielding. Eight balanced mono or unbalanced stereo lines with color-coded wires. 14 Trs plugs on one and end XLR Male plugs on the other end. Quality at a fair price Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices.

Balanced XLR to 14 cable is perfect for interconnecting many types of audio equipment with XLR connector and 14 inch TRS jack. Pro grade performance with oxygen-free copper OFC conductors to deliver pristine sound. The XLR male to 14 cable has copper braided shielding to provide maximum cancellation of hum and noise Polyethylene insulation improves high frequency response of the 14 inch to XLR cable. Robust construction includes a flexible PVC jacket with gold-plated connectors in a rugged metal housing The 14 to XLR cable has molded strain relief to support the weight of a Microphone. 14 to XLR male cable has 360 degree easy-grip treads for frequent unplugging and durability.

Balanced cables have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal.. Prevents ground loop issues.. XLR to 14 TRS balanced pro audio cables provide high fidelity and eliminate noise in the recording studio and on the stage.. Our new permier series cables up the ante in terms of construction quality and performance..

Multiple Applications and Widely Compatibility This xlr to 14 designed to convert a balanced XLR output to a 14 TRS input, suitable for microphones, mixers, audio interfaces, power amplifier, stereo system and other types of audio equipment with XLR connector and 14 inch TRS jack.. 24AWG OFC Braided Shield Design AuxLink 14 to xlr use 24AWG OFC braided conductor with a multi-layer shielding structure. Double shielding, foil shielding and metal braid shield to provide nature sound, noise shielding, no noise.. Hi-Fi Sound Quality This trs to xlr uses 24K Gold-plated XLR and 6.35mm connector, it could eliminate signal loss and static noise,provide durability and improve the signal transmission the copper shell blocks any interference which prevents the loss of sound quality In addition, we add an anti-jamming magnetic ring to this cable which can anti-interference and filtering functions, ensures the stable signal transmission without loss provide Hi-Fi sound quality for you. Soft Flexible Nylon Braided Cable Add a nylon braided to the import PVC Jacket, enhances it's flexibility and durability. This xlr male to 14 cable can stand 150,000 times bends without reducing the flexibility. 10 times more durable and extend the service life.. What You Get XLR to trs cable 6ft 1pack. AuxLink is a professional manufacturer focusing on audio cables, we can provide our customer with high quality product..

CableCreation Standard 3Pin XLR to 14 microphone cable design to transit audio signal between audio equipment with XLR and 14 TRS interface.. The 14 to male xlr use gold plated connector to provide frequent unplugging and durability. Thick TPE jacket, strong and durable,ideal for outdoor use.. This trs to xlr balanced audio cable use pro grade oxygen-free copper OFC conductors to deliver pristine sound maximum cancellation of hum and noise. Compatible with microphones, amplifiers, mixers, speakers, Shotgun Microphone,guitars, studio monitor,phantom power supply,Home Karaoke system and other audio device to recordingedit music,hold a concert,do public speech.... You will receive 6 feet xlr 3 pin male to 14 6.35mm female cable and 2 years warranty and lifetime tech support..

Heavy Duty Flexible Rubber Jacket. Metal 3 Pin Male XLR 14 Ends. Tri-Grip Rubber Booty XLR Strain Relief. Dual High Grade 21g Copper Conductors and Shield. High Quality Noise Free Performance.

Made of high purity 22awg ofc conductor We use good quality oxygen free copper with shielding ensuring high fidelity sound quality and providing maximum's conductivity and durability. It's especially great for studio or live performances.. Double-shielded The cable constructed with double-layers of shielding high density bare copper braid shielded aluminium foil minimize signal interference and ensure the transmission stable, provides maximum against electro magnetic interference emi and radio frequency interference rfi.. Incredibly durable With a 10000 bend lifespan several times longer than original xlr cables, premium metal housing and durable, high purity ofc internally, rohs pvc environmentally friendly materials and nylon braid externally, against scratching and abrasion, prolonging it's service life.. Compatible flexible Xlr male to 14 6.35mm trs cable compatible with equipments with 3-pin xlr connectors and 6.35mm socket such as mixer, camera, amplifier, soundbox, microphone, power amplifier.. Kinxiyu is committed to provide consumers with high-quality cables and better after-sale service. All of our cable provide 1-years after-sale service. If you have any problems, please feel free to contact us via Amazon..

Balanced 14 TRS to XLR Male CableThis xlr to 14 quarter inch cable is used to output balancedunbalanced audio signal from 14 port to xlr input device. Output device can be mixer, dj controller, podcast, keyboard, electronic drum, etc. These devices usually has 14 balunbal output port, which are usually marked with main out, control room, FX send, Master out, Sub out, Stereo out, Stereo return, etc. Input devices are usually powered speaker, stuido monitor, interface, AMP, etc.. TS replacement active speakerThis stereo balanced trs cable can be used on unbalanced 14 mono TS port, please don't worry, only issue is that you can can still only get unbalanced output. For speaker connection, please only use for powered speakers, as passive speaker will need a preamp before it can play the sound. Please do not use to connect guitar to xlr mic input, due to mis-match impedance, your device will not receive the guitar signal.. Noise-Free Heavy Duty This trs to xlr adapter cord is braided design with nylon coating. The TRS tip is gold plated, it will transfer a more clear signal with no noise. Internal construction includes OFC spiral, silver paper coating and threaded cotton. These materials are all used to reduce signal interference, 90 OFC can keep out RFI and EMI, no buzz or hum will produce. We also have a drag-proof solution in the connector, so the internal wire won't break out easily.. 15FT X2Package will come with 2X 3pin XLR male to TRS cables, each is 15FT4.5meters, red color. Please double check if this length is right for you.. Customer SupportWe offer 2 years after-sales support for this trs to xlr male cable, for any issues within 2 years, customers can come back for replacement. Our technical support is also online for 24hours. Should any issues happened after package received, customer can message us from order page. We'll give response within 12 hours..

Balanced 14-inch TRS to XLR male adapter converts a 14-inch input into an XLR male output. Connection A 3-Pin XLR Male Connector Connection B 14 TRS Plug.. High Quality, Robust and durable all-metal die-cast housing, Stable, Durable, and Flexible, work perfectly.. The international standard of audio connectors, reliable transmission of audio frequencies, all-metal construction ensure loss-less transmission signal. Protective Shielding for RF and EMI noise elimination.. Another one of those adapters that every audio geek needs to have in their toolbox. XLR Adapters for Pro Audio use. Great for mixers, microphones, amplifiers, EQ, rack gear, keyboards, guitars, electric piano, electric drums, etc..

Balanced male XLR to 14 adapter connects an XLR cable to a 14 inch TRS jack. Pro-grade performance delivers pristine sound with this male 14 to XLR adapter. Male 14 inch to XLR adapter features robust construction in a rugged metal housing. Male XLR to 14 inch adapter is compatible with mixer and speaker with TRS and XLR. Convenient and cost effective 2-pack male to male XLR to TRS adapter.

DURABLE CONNECTORS XLR 3 Pin Male Connector With Black Metal Housing Featuring Contact To A Corrosion Resistant Gold Plated 14 Inch 6.35mm TRS Balanced Mono Connector. HEAVY DUTY SHELL Zinc Alloy metal shell protection for the connector to effectively reduce signal attenuation. FLEXIBLE PVC JACKET Preventing twisting, kinking and tangling and easy to be packed and disassembled. HIGH QUALITY CONDUCTOR High coverage of Oxygen-free copper balanced audio cables, seamlessly transmits audio for tone, while handling noise and interference. APPLICATIONS Use a high quality microphone to connect to a mixer or guitar amplifier. Work with some devices with TRS 6.35mm Jack to XLR Male, such as Microphones, Audio Sound Consoles, Power Amplifier, Stereo System and more.

FLAWLESS DURABLE - This professional 3 pins XLR female to 14 TRS audio cable with traditional large size of 3 pin zinc alloy XLR connector female to black metal TRSbig male pin plated with 24K gold. Robust big size connectors, not afraid of any ends separating.. HIGH GRADE TRANSMISSION - Balanced Lo-Z wire, assures the transmission in a smooth quality way.. NOISELESS - Dual Insulated shielded insulated copper conductor Oxygen Free Copper, extra large quantities of braided copper inside, resist the interference EMI or RF from outside.. APPLICATION - Transport signalstereo audio between 14 TRS and XLR such as between audio mixer to speaker, and etc. It also can be as a set of patch cable for your studio.. MORE CHOICE - You can also find the packs of female XLR to 14 TRS with 2 packs, or packs of guitar cable with 14 to XLR male female cables, as well as 3ft 6ft from EBXYA store on amazon..

Mogami GOLD 8 TRS-XLRM Fan-Out Audio Adapter Snake Cables are famous for neutral tone, remarkable detail, and a noise-free background. Widely used in the finest recording studios and equipment, Mogami Audio Snakes are a premier choice for professionals and enthusiasts alike.. Engineered to provide eight audio channels in a single cable assembly with a fan-out design at both ends, each 14 TRS to XLR-Male channel is individually shielded with protective jackets and numbered for easy identification. Ideal for use with nearly all mixing boards, preamps, audio interfaces, PA systems, and related send devices equipped with balanced 14 TRS output jacks and receive devices equipped with balanced XLR 3-pin inputs.. For the highest level of audio performance, Mogami GOLD 8 TRS-XLRM Fan-Out Adapter Snakes are wired with Mogami Neglex Multicore Microphone Snake Cable and terminated with 14 TRS male plugs going to XLR-Male 3-pin plug connectors, all with gold contacts. Supplementing the amazingly clear tone, Mogami GOLD 8 TRS-XLRM Adapter Snake Cables are compact, rugged, and super-flexible for handling with ease.. This Mogami GOLD 8 TRS-XLRM-05 Audio Adapter Snake Cable is a 5 foot length. The Mogami GOLD 8 TRS-XLRM Audio Adapter Snake Cable series is also available in 10, 15, 20, and 25 foot lengths.. Mogami Lifetime No Excuses Warranty all brand new Mogami cables include Mogami's Limited Lifetime No Excuses Warranty to the original purchaser and are proudly supported by Mogami and their dedicated network of Authorized Resellers. Please reference the entirety of Mogami Cable's Limited Lifetime No Excuses Warranty specification for complete details..

Professional quality professional 3-pin XLR to 1 4 6.35 mm stereo adapter is your best choice, giving you perfect sound quality. DURABLE CONNECTORSadopt 24K gold plating process, corrosion resistance, provide high guarantee smooth signal transmission, minimize the loss of signal transmission.. FLEXIBLE PVC JACKET Preventing twisting, kinking and tangling and easy to be packed and housing and durable, With a much longer service life.. APPLICATIONSXLR 3-pinMale to 6.35mmMale stereo Adapter is perfect for connecting microphones with 14 jack to Amplifier, Soundbox, Microphone, Mixer, guitar, tuner and other professional equipment. HIGH QUALITY CONDUCTOR 4N oxygen free copper balanced audio cable with shielding, high fidelity, seamless audio transmission,.