Size The thread size of 10AN is 78-14 UNF. The AN side is sealed by a 37 degree angle.. Application The swivel fitting is only work with stainless braided and nylon braided hose .. Material Made of aluminum alloy 6061-T6.. Parameter Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. Feature 360 Swivel design for easy assembly. It can be reused and recycle..

10AN braided fuel hose kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel line kit can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Package includes 6pcs 10an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree and 10an braided fuel line Length 10feet. Hose ID 916. Hose OD 0.783inch.. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Inner Diameter 0.56 14.27mm Outside Diameter 0.82 20.83mm. Inner hose Materail CPE Synthetic material hose Outside coverd with high quality Nylon and stainless steel wires. Working Pressure 500 PSI 34.5 Bar Burst Pressure 2000 PSI 138 Bar. Swivel design for easy assembly. Application forracing fuel. pump gas.fuels with ethanol. alcohol based fuels.motor oil coolant etc..

Application AN10 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line.. Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Inside Diameter 916. Outside Diameter 0.78inch. Length 10 Feet. Please measure before purchase. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

10AN braided fuel hose kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel line kit can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Package includes 10pcs 10an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 10an hose separator clamp and 10an braided fuel line Length 20 Feet. Hose ID 916. Hose OD 0.783inch.. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Adjustable rangeThis wrench size can be adjusted to 3AN, 4AN, 6AN, 8AN, 10AN, 12AN, 14AN and 16AN.. Material It's made of lightweight 6061-T6 aluminum . Recommended for aluminum fitting, easy to damage for other materials. Advicewrap the wrench's jaws with electircal tape to better protect the fitting wrench.. AdvantageMultisize in one Contact of four opposite sides.. Sizelength 7.2 inch18.5 cm,width 2.7 inch7.1 cm,thickness0.52 inch1.35cm.. DesignFeaturing a curved design with a non-slip handle for a comfortable grip and fit for hand movement..

APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications.. WORKING ENVIRONMENT-Maximum Working Pressure725 psi5 mpa. Bursting Pressure2175psi15 mpa. Working Temperature Range-40 to 392-40 to 200.. SIZE- length10 feet. Inner diameter0.51 inches 12.95 mm. Outer diameter0.63 inches 16 mm.. MATERIAL- Inner layer PTFE Teflon rubber middle layer 304 stainless steel wire mesh sleeve outer layer braided nylon. PTFE fuel lines are more resistant to high temperature and pressure.. NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

HIGH-QUALITY MATERIAL - The high-pressure 10an hose?covered with high quality is woven Nylon and 304 stainless steel braided CPE synthetic rubber to enhance flexibility and give a cool racing appearance.. NYLON BRAIDED - The 10an hose kit can stand -100 to 500 -73C to 260C, the maximum working pressure up to 500 PSI. The 916 fuel hose has good retardancy and excellent corrosion resistance. Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, etc.. FLEXIBILITY - The highlight of this fuel line is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this fuel tube makes it easier to install. It also results in more fluidity in transmission.. WIDE APPLICATION - The 10an hose is specially designed to compatible with any fuel including methanol and nitromethane, oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85.. CUT THE SIZE AS YOU WANT - The 10an line is 10 Feet 3 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines, the 916 hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance.. Please note that the Hose Inner Diameter is 14.22mm 0.56 inch and the Hose Outside Diameter is 20.06mm 0.79 inch.

Specifications ID 389.5mm OD 2317mm. Minimum Bend Radius 3.9100mm. Wall thickness 3mm.. Parameter Working Pressure 300psi. Burst Pressure 1200psi. Temperature Range -40F to 257F.. Medium The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

Nylon Braided CPE Fuel Line Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.. Maximum Working Pressure psi 500 psi. Bursting Pressure psi 2000psi. 10AN nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances.. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Universal Application The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Package Includes 1 x 10AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..

Size The thread size of 10AN is 78-14 UNF. The AN side is sealed by a 37 degree angle. Material Made of aluminum alloy 6061-T6.. Application The swivel fitting is only work with stainless braided and nylon braided hose .. Parameter Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. Feature 360 Swivel design for easy assembly. It can be reused and recycle..

Size Inner hole diameter 0.75 inch 19mm. Fit for clamping and mounting 10AN fuel line.. Function It can use to secure and separate transmission lines to keep your project clean and organized.. Material Aluminum alloy 6061-T6.. Application Fuel hose separator clamp wildly used in fuel hose, oil line, brake line, gas line, water pipe etc.. Note Five sizes of hose mounting clamps available, please measure the OD of your hose before purchasing ..

ID 0.52inch. OD 0.69inch.Length 20 feet6M. Please measure before purchase. PTFE fuel line can be used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc.. Working Temperature Range -76 to 446 -60 to 230. Max Working Pressure 1250psi. Bursting Pressure 3750psi.. Applicable Medium all automotive fuels, lubricants, and coolants.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Material innter hose CPE synthetic rubber. The middle layer 304 stainless steel wire mesh sleeve The outer layer High quality braided nylon. Inner Diameter 0.56 14.27mm Outside Diameter 0.82 20.83mm Working Pressure 500 PSI 34.5 Bar Burst Pressure 2000 PSI 138 Bar. Operating temperature -40 Degree F to 350 Degree F. You can use this line with racing fuel, pump gas, fuels with ethanol, alcohol based fuels, motor oil coolant..

100 brand new, never been used.. Stainless Steel innter hose CPE synthetic rubberThe middle layer 304 stainless steel wire mesh sleeve The outer layer 304 stainless steel wire. Braided Nylon innter hose CPE synthetic rubberThe middle layer 304 stainless steel wire mesh sleeveThe outer layer High quality braided nylon. Operating temperature -40 Degree F to 350 Degree F. Application forracing fuel,pump gas,fuels with ethanol,alcohol based fuels,motor oilcoolant etc..

Excellently sealed,100 no leaking under high pressure and temperature.Exchange or return free if it's leaked. Withstands operating temperatures from -40 F to 257 F degrees.Working Pressure 500 PSI ,Burst Pressure 2000 PSI. Maximized resistance to heat, corrosion and abrasion Covered with high quality woven nylon to giving a cool racing appearance.Woven mechanism construction for enhancing flexibility Full coverage outer braid of high tensile stainless. Hose stainless steel nylon braided CPE synthetic rubber,Fitting Material high quality lightweight T-6061 Aluminum Material,Anodized Finish for strength and durability. Package quantity 1pc 16Ft Stainless steel braided PEFT hose 10pcs 10AN hose TEFLON fitting.

PREMIUM QUALITY Nylon fiber and stainless steel braid 10an cover for excellent flexibility and resistance to abrasion. High-quality CPE chlorinated polyethylene synthetic rubber on the inside provides constant flow during operation of the racing engine. All connectors are made of T6061 aluminum can be reused with high strength and good durability.. WIDE APPLICATION 10AN fuel line repair kit will fit most standard 58 inch tube stub in any fuel system. Widely used with coolant, fuel, diesel, oil, hydraulic fluid, pump gas, alcohol and air. Works great in vehicle motorcycle transmission cooler system, pump, turbo system and fuel system, such as fuel pump, fuel filter, fuel tank, oil filter, oil sandwich adapter, turbo oil return, and etc. Please note NOT FIT E85.. MEET YOUR NEED This fuel line hose is long enough and can be cut to any size to fit your application, and the hose connectors have 3 different angles, you can choose the right hose end for your project.. PACKAGE INCLUDES 1pcs 58 braided fuel line Length10ft3M, 6pcs 10an swivel hose ends 2pcs straight, 2pcs 45 degree, 2pcs 90 degree.. BUY WITH CONFIDENCE This 10AN fuel line kit comes with 12 months warranty. For any reason you're not completely satisfied, please contact us for a replacement or full refund. We will respond within 24 hours..

Cut in 10 foot spools.. Working Pressure 500psi. Burst Pressure 2000psi. Operating Temp -40F to 350F. ID 14.27mm .562 OD 20.83mm .820.