Compatibility 10-inch 60T with a 58-inch arbor, compatible with most 10-inch miter saws and table saws. Durable The saw blade is made of durable, high-quality alloy steel, and the high-density tungsten carbide teeth are tough and durable, providing long-lasting cutting life. Efficient Cutting The saw blade features sharp tungsten carbide teeth and a thin kerf design, capable of withstanding speeds up to 7000 RPM, enabling efficient woodworking. Shock-absorbing Grooves The table saw blade features a shock-absorbing groove design that dissipates heat, reduces noise, and dampens vibration, improving blade stability for longer life and improved cutting performance. Wide Application Suitable for long-lasting cutting of a variety of woods and softwoods, including plywood, particleboard, multi-layer board, panel board, medium-density fiberboard, coated and multi-coated boards, laminated and double-laminated plastics, and more.

10 90-Teeth Ultimate Polished Finish Saw Blade for Wood, 0.087 Kerf, ASFG, produce extremely smooth cuts with with 58 Arbor. Double Side Grind tooth geometry produces ultimate polished finishes equal to at least the finish of 220-grit sandpaper. Axial Shear-face grind ASFG design cleanly shears through material for a superior quality finish. Compatible with DeWalt, Skil, Metabo, Makita 10 Inch Miter Saws, Table Saws and other Saws. FOXBC proprietary foxcarbide carbide specifically designed for each application to increase performance, which is durable, wear-resistant and has a long service life. Professional woodworker, cuts fine molding, hardwoods, softwoods, veneered plywood, melamine and more.. FOXBC new ultra thin kerf delivers fast and effortless cuts with a reduced amp draw on tools for less material waste and to help maximize tool performance. FOXBC industry leader of circular saw blades, 10 inch saw blade compatible with DeWalt DWE7491RS, DWS713, SKIL MD6305-00, TS6307-00, SPT99-11, Metabo 10 inch table saw and keep your table saw cutting cleanly for the best results..

WOOD CUTTING This miter saw blade designed for cutting wood and soft materials. CUTTING CAPACITY 120-Tooth for fine finish working, maintaining consistent cutting quality throughout its lifespan. SMOOTH OPERATION Engineered teeth pattern delivers clean, accurate cuts while reducing vibration during use. EASY INSTALLATION Standard 16mm arbor size ensures compatibility with most common saw models for quick blade changes. DURABLE CONSTRUCTION Made from high-grade steel for long-lasting performance and reliable cutting results.

10 Inch Thin Kerf Rip Saw Blade, 24-Tooth FTG, Kerf .094, Plate .071, Hook Angle 20, Wood Cutting with 58 Arbor. The blades with high-quality thin kerf and plate for fast, durable, smooth cutting, less vibration and noise, and excellent finish. Made from high-density tungsten carbide for toughness, wear-resistance, and long life. Compatible with DeWalt, Skil, Metabo, Makita 10 Inch Miter Saws, Table Saws and other Saws. Thin Kerf Rip Saw Blade Ideal for quick work of ripping operations in hard- and softwood. and it also delivers strong results when crosscutting wood or working with plywood. Ideal for working with materials that are 34 to 2-34 inches thick, the blade can also handle thinner or thicker materials, and it can be used to cut chipboard or laminates.. FOXBC 10 Inch Saw Blades Professional Woodworking keep for Miter Saws and Table Saws cutting cleanly for the best results..

Universal Dimensions 1PC Tungsten Carbide Tipped saw blade, professional line for wood cutting. Outer diameter 10, Inside diameter 58, Teeth 80T, Thickness 1.8mm, Kerf 2.8mm, Operating up to 5500 RPM. Ideal for circular saws, miter saws, and table saws.. Tungsten Carbide Tipped Our ATB TCT saw blades are equipped with premium tungsten carbide tips, offering exceptional hardness and wear resistance for a significantly longer service life than standard blades. Their sharp edges allow for high-speed cutting - ideal for efficient framingwhile also producing ultra-smooth finishes on delicate finishing work.. Anti-stick Coating By reducing the buildup of pitch, sap, and resin, the special coating enables smoother cuts with less friction and lower operating temperatures. Additionally, it provides corrosion resistance for a longer blade life and consistently cleaner cuts.. Noiseless, Reducing Vibration Heat Dissipation Circular saw blades for wood working feature laser-cut expansion slots that reduce vibration and noise, ensuring the blade remains flat and stable. The stabilizer vents further enhance performance by cooling the blade during use.. Multiple Uses For ultra-fast, clean cuts in softwood, hardwood, plywood, MDF, OSB, and laminated materials - our high-quality carbide saw blades are the ideal choice..

INCLUDE 10 Inch Upgraeded TCG 80T Aluminum Non-Ferrous Metal Plastic Saw Blade with 58-Inch Arbor. HEAVY DUTY High quality C-4 construction grade tungsten carbide teeth for extreme durability, razor-sharp cuts, and longer life.. DURABLE Electrophoretic coating reduces the rusting and corrosion, provide good cutting performance. Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp, provide the best cutting experience. UPGRADEED GRIND Upgraded Triple Chip Tooth Grind better for durable and smooth cut on non-ferrous metals, aluminum and plastic.. TIPS When working, please do all safety protective work, when not working , please hang the saw blade away from the damp place to prevent rust and extended work life..

UNIQUE DESIGN PREMIUM TIP, ANTI-VIBRATION DESIGN, LARGE TEETH. General purpose finishing and the 80 teeth tip is made of VC1 tungsten carbide which adds the saw blade's sharpness and provide extended life of saw blade. The large tooth design allows the blade to be safely sharpened more times. Larger spacing between the teeth is more convenient for chip removal and heat dissipation.. HIGH QUALITY CARBIDE MATERIAL Provide the best cutting experience, with good cutting performance. Prolong the service life of Saw Blade, and add the sharpness.. WIDELY USE The 10 saw blade has a 58 diamond arbor which fits into both round and diamond hole blade machine and maintains the stability when in use.. EXCELLENT ATB STYLE The ATB style which adds the cutting speed and durability. This helps maximize both the accuracy of the cut and the efficiency of your work, so you can enjoy a job well done and the ability to complete more tasks in less time.. USE GUIDE The equipment should be equipped with the safety protection device. When not in use, hang the saw blade away from the damp place to prevent rust..

Production Name 10 Wood Saw Blade, Outter Diameter 10250mm,Teeth Type Carbide Tip Teeth,Crossing Cutting,Design for general using on wood working. Features a 5816mm universal arbor, no need to add one ring adapter for most american wood saw. Precision-ground teeth allow for smooth, accurate cuts,thin saw blade design reduce material consume or waste. Wide used on miter saw, table saw, circular saw or bench saw for wood working, save your time and energy. 40 tooth count blades are perfact for trim and finish jobs and cutting plywood quickly,also less teeth and less time to re-sharpen teeth of saw blade.

Used on LOW-RPM METAL CUT OFF SAWS.. Universal Dimensions 10 Tungsten Carbide Tipped saw blade 60T, professional line for metal cutting. Outer diameter 10, inside diameter 58, operating up to 2500 RPM. Ideal for table saw.. High Efficiency Superior Durability Our TCT saw blades come with premium tungsten carbide tips that offer premium hardness and excellent wear resistance, which significantly extends the product's service life compared to standard saw blades. At the same time, the sharp cutting edges enable high-speed metal cutting, thus enhancing work efficiency.. ATB Tip Design The ATB tip design allows the saw teeth to cut the material alternately like small knives, reducing the resistance during cutting. This design also lowers the load on cutting equipment, making the process smoother.. Noiseless Reducing Vibration10 saw blade is equipped with expansion slot dispensing to help reduce noise pollution and provide a more quiet work environment.. Multiple Uses Our cutting blades with high-quality carbide are designed for ultra-fast and clean cutting of iron, mild steel profiles pipe, angle iron, tube, channels, steel studs, thin gague, and solid bars..

10 Inch Circular Saw Blade for Table SawMiter Saw, 58 arbor15.88mm, 0.098 Kerf2.5mm, 32-Tooth60-Tooth80-Tooth, 3 pack. High-quality plate and thin kerf for fast, smooth, clean cuts. Tungsten carbide teeth provide excellent wear and heat resistance, toughness, longer life. Compatible with DeWalt, Makita, Skil, Metabo 10 Miter Saw and Table Saw. Perfect for slicing through hardwoods, softwoods, plywood, melamine, oak, pine and moulding.

10 Inch 50-Tooth Combination Saw Blade, .098 Kerf, Hook Angle 15, Plate .071 with 58 Arbor, ATB. Combination blade is ideal for ripping and crosscutting wood wood composites with the goal of a smooth finish.. Each set of 5 teeth is separated by a large gullet. The blades with high-quality thin kerf and plate for fast, durable, clean cutting, less vibration and noise, and excellent finish. Made from high-density FoxCarbide tungsten carbide for toughness, wear-resistance, and long life to increase performance. Compatible with DeWalt, Skil, Metabo, Makita 10 Inch Miter Saws, Table Saws and other Saws Ideal for crosscutting oak, pine, melamine, plywood, and moulding. FOXBC's professional woodworking cutting tools, large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting, keep your saws cutting cleanly for the best results..

DIMENSIONS - Diameter 10 inch Arbor 58inch Kerf 2.2 mm Carbide Teeth 60T. APPLICATION - Circular saw blade Ideal for cutting hardwood, softwood, plywood, chipboard and MDF.Providing a high degree of finish edge.. APPLICABLE MACHINES - Woodworking saw blades can be used with circular saw, miter saw, table saw, radial arm saw, and more.. MATERIAL - Miter saw blades are made of durable premium alloy steel material.with hardened and sharper tungsten carbide teeth for effective woodworking.. FEATURES - Tungsten carbide teeth provide excellent wear and heat . Incorporates an ATB Alternating Top Bevel offset tooth design..

Applicable Specifications 2-Piece circular saw blades includes 1pc 10inch 40T saw blades and 1pc 10inch 60T saw blades. Arbor size 58 inch15.88mm, Max. 6000RPM, fit for miter and table saws.. Tungsten Carbide Teeth Clean cuts thanks to high-quality tungsten carbide and precise grinding. The blade has good wear resistance and heat resistance, providing fast and efficient removal of chips and swarf. Not easy to deform and bend, reduces the load of tools. Extend the service life of the circular saw blade.. Precision ATB Design Advanced ATB Alternating Top Bevel offset tooth structure that scores wood fibers cleanly, minimizing splintering and leaving a smooth, flawless finish.. Chainsaw Compatibility The circular saw blade is compatible with cordless chainsaws, corded chainsaws, miter saws and table saws. The four extension slots around the circular saw blade help dissipate cutting heat and reduce cutting noise for a pleasant cutting experience.. Widely Used TCT saw blades perfect for cross-cutting and ripping various materials, which is specially used for cutting wood quickly, including softwood, wood with nails, hardwood, plywood, MDF, and laminate. Ideal for both professional and DIY enthusiasts..

10 Inch Circular Saw Blade for Table SawMiter Saw, 58 arbor15.88mm, 0.098 Kerf2.5mm, 50-Tooth. High-quality plate and thin kerf for fast, smooth, clean cuts. Tungsten carbide teeth provide excellent wear and heat resistance, toughness, longer life. Combines one flat tooth for efficient ripping with four alternate top bevel ATB teeth for smooth crosscutting, plus large gullets for fast, effective chip clearance.. Compatible with DeWalt, Makita, Skil, Metabo 10 Miter Saw and Table Saw. Perfect for slicing through hardwoods, softwoods, plywood, melamine, oak, pine and moulding.

10 Inch Circular Saw Blade for Table SawMiter Saw, 58 arbor15.88mm, 0.098 Kerf2.5mm, 60-Tooth60-Tooth. High-quality plate and thin kerf for fast, smooth, clean cuts. Tungsten carbide teeth provide excellent wear and heat resistance, toughness, longer life. Compatible with DeWalt, Makita, Skil, Metabo 10 Miter Saw and 10 Table Saw. Perfect for slicing through hardwoods, softwoods, plywood, melamine, oak, pine and moulding.

0.110 kerf thickness, 0.071 plate thickness, 5 Hook Angle, Hi-ATB 30.

10 Inch Circular Saw Blade for Table SawMiter Saw, 58 arbor15.88mm, 0.098 Kerf2.5mm, 40-Tooth60-Tooth, 2 pack. High-quality plate and thin kerf for fast, smooth, clean cuts. Tungsten carbide teeth provide excellent wear and heat resistance, toughness, longer life. Compatible with DeWalt, Makita, Skil, Metabo 10 Miter Saw and Table Saw. Perfect for slicing through hardwoods, softwoods, plywood, melamine, oak, pine and moulding.

Made by Laser-Cut technology, much better than traditional punching process. Punching always has negative effects on the body of the saw blade like deformation and stress, but Laser-Cut could avoid these problems. So Laser-Cut could reduce vibration and noise, maintain durability and cutting precision, keep the blade running cooler.. Tungsten carbide tips are carefully welded to each blade tooth using computerized technology to control the exactness of the saw blades. An automated grinding process yields accurate tip geometry to increase the life and performance of the ATB C3 carbide teeth.. With noise reduction lines, which is the feature of high quality saw blades large micro grain tungsten carbide teeth, which provides extreme durability and longevity and allows professional resharpening and prolongs blade life tri-metal shock resistant brazing, which allows the tips to withstand extreme impact for maximum durability electrophoresis coating, which protects against rust.. Ideal for dry wood applications such as ripping, cross cutting, and miter cutting on hardwood, softwood, high-quality finished lumber, rough framing lumber, plywood, hardboard, MDF and OSB. Do not use to cut steel or iron.. The product is a 2-Piece saw blades set. Our saw blades are all insured by AIG with Liability Insurance. Packed in card box each..

Ideal for cutting all types of wood. Construction grade carbide teeth provide maximum resistance for longer life. Electrophoretic Coating reduces the rusting and corrosion. For use with miter or table saws. Quality Guarantee, Limited Lifetime Warranty by TOMAX.

10 Inch Saw Blade for Table SawMiter Saw 2 combo pack, 58 arbor, 0.098 Kerf2.5mm, 40T60TTungsten Carbide Tipped, MAX RPM 6,000. 10 Inch 40T carbide ripping and crosscutting 60T carbide fine finish tablemiter saw blade for cutting hardwoods, softwoods, plywood, melamine, OSB, oak, pine and Nail-Embedded Wood. Ultra thin kerf design for fast, durable, and clean cuts, requires less cutting power from the user and the saw for better control over the cut.. Made from C3 grade high-density tungsten carbide for toughness, wear-resistance, and long life. Laser-cut stabilizer vents keep noise and vibration low, giving you precision and control for cleaner cuts.. Compatible with the vast majority of 58 arbor TableMiter saws on the market. Such as DeWalt, Bosch, Evolution, Makita, Skil, Metabo 10 Table SawMiter Saw.

Brute Carbide an upgraded C3C4 micrograin formulation for increased impact damage resistance and long life. Triple chip grind tooth geometry designed for delivering maximum performance and high quality of finishing in highly abrasive materials. Extra-hard steel blade body delivers accuracy and resists bending and deflection for true cuts. Thinner kerf provides faster cuts and less waste. Versatility the blade works with portable table saws and 10 in. Miter saws.

Use on radial arm saws sliding compound miter saws for cutting softhardwood, plywood laminates.. 0.118 kerf thickness, 0.098 plate thickness, -5 hook angle, 4ATB 1 trapezoidal tooth Grind..

Materials Ideal for Hardwoods MDF Melamine Plywood Softwoods. Machines Compatible with Miter Saw Portable Table Saw Slide Miter Saw Stationary Table Saw. Applications Crosscut or Cross Ripcut or Rips. Laser-Cut Premium Quality Steel Plate Body Laser-Cut Heat Expansion Slots Laser-Cut Sound Dampening Slots Polymer-Filled Tensioning Ring Tri-Metal Brazing. Industrial Chrome Carbide Precision Mirror Finish Sharpening.

All-Steel Cenalloy Construction for Superior Strength Century Drill Tool's Cenalloy saw blades feature all-steel, all-hard plate bodies designed to minimize distortion and run out during cutting. This durable construction ensures long-lasting performance and consistent precision, even under tough conditions. Precision Ground Teeth for Smooth, Clean Cuts These saw blades are engineered with precision-ground teeth, delivering smooth and clean cuts every time. Ideal for professional use, they ensure accurate cutting with minimal effort, reducing the need for additional finishing. Compatible with All Popular Saws Designed for versatility, Century Drill Tools Cenalloy saw blades fit all popular saw models, making them a convenient and adaptable choice for any woodworking or carpentry project. Their universal fit ensures seamless integration with your tools. Easily Resharpened for Long-Term Value These saw blades are easily resharpened, ensuring they maintain peak cutting performance over time. This feature not only extends the life of the blade but also offers cost savings by reducing the need for frequent replacements. Ideal for Smooth Miter Edges and Crosscuts Century Drill Tools plywood blade is specially designed for smooth miter edges and precise crosscuts, eliminating splinters and rough finishes. Perfect for woodworking projects that demand clean, professional results, this blade delivers flawless cuts on every pass.

Ready to use in 30 seconds.

Upgrade Your Woodworking Game Our 3-Pack Combo 10-Inch MiterTable Saw Blades, including 32-Teeth for general purpose, 60-Teeth for fine finish, and 80-Teeth for ultra fine finish, will take your DIY projects to the next level. Perfect for American DIY enthusiasts, woodworkers, homeowners, carpenters, and contractors.. Built to Last Crafted with fully hardened steel blade bodies and tougher tungsten carbide teeth, our blades are designed to withstand the toughest cutting tasks. Experience stability, durability, and extended sharpness, allowing you to tackle any softwood, hardwood, plywood, chipboard, or laminated project with ease.. Precision at its Finest With a thin 0.095 Kerf and ATB Alternating Top Bevel teeth design, our blades deliver quick, smooth, accurate, and clean cuts every time. Say goodbye to material waste and hello to professional-quality results. Achieve the precision cuts you deserve.. Versatile Compatibility Our blades are engineered to be compatible with the majority of 10-inch miter saws, jobsite saws, and table saws commonly found in American workshops. No matter what saw you use, our blades seamlessly integrate to deliver exceptional performance.. Unleash Your Creativity Whether you're working on home improvement projects, building furniture, or constructing intricate woodworking pieces, our blades are the ultimate tools to unleash your creativity. Experience the satisfaction of flawless cuts and achieve remarkable craftsmanship..

Designed to cut steel, angle iron, sheet metal and other ferrous metal products, Do not use on High Speed Saws, Swift Cut Registered Trademark. Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only. Blade double reinforced with fiberglass mesh for durability and safety. Arbor reinforced with metal for extra strength. Diameter 10-inch, Thickness 332-inch, Arbor 58-inch, Max RPM 6, 100.

Steel blade designed for cutting light gauge aluminum, plastic and vinyl siding up to 18 thick. For material thicker than 18 use IVY Classic 36366 10 80T Non-Ferrous Plastics Blade.. CAUTION BLADE MUST ROTATE IN DIRECTION OF ARROWS. High carbon-alloy steel blade. Precision ground teeth with no set for smooth accurate cuts, Swift Cut Registered Trademark.. Arbor 58.

10 Inch MiterTable Saw Blade Metal Cutting 80-Tooth TCG, KERF 0.094, 58 Arbor. Laser-Cut Stabilizer Vents for trapping noise and reducing vibration for accuracy and durability. Made from high-density tungsten carbide for toughness, wear-resistance, and long life. IDEAL for cutting aluminum, copper, plastics, brass, fiberglass. Compatible with DeWalt, Skil, Metabo, Makita 10 Miter, Slide Miter, Table Saws and other Saws. Triple Chip Grind TCG Tooth Geometry for maximum life, speed, and durability, giving clean, burr-free cuts. FOXBC Aluminum saw blade series is ideal for corded and cordless saws when on-the-job cutting non-ferrous metals such as aluminum extrusions, copper pipe, brass plate, etc. keep your saw cutting cleanly for the best results.

Versatile Cutting Performance Our 10-Inch Saw Blade with 80 Teeth is designed for cutting plastic, aluminum, and non-ferrous metals, making it a versatile choice for your projects.. Long-Lasting Sharpness With C4 grade ultra-fine grain carbide teeth, this blade maintains its sharpness for up to 2X longer than standard blades, ensuring consistent cuts.. Rust and Corrosion Resistant The Electrophoretic Coating on our blades reduces rusting and corrosion, maintaining the blade's integrity even in challenging environments.. Effortless, Clean Cuts Our TCG Grind tooth design ensures effortless, smooth cuts in non-ferrous metals, aluminum, and plastic items without causing damage or leaving burrs.. Quality Assurance Safety Each TWIN-TOWN saw blade comes with a Unique ID Code, allowing you to track its quality assurance. Backed by a Limited Lifetime Warranty, you can trust in our product's reliability and safety..

DIMENSIONS - Includes 1pc 105880T TCT table saw blade, 0.098 Kerf for Ultra Finish Wood Cutting..

Up to 100 faster cutting compared to standard blades. Up to 30 more cuts per charge compared to standard blades. 45 tooth58 Arbor Carbide tipped for premium, crosscutting in construction lumber and plastics. Thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss. Special ATAFR alternate top alternate face w raker Carbide tips provide smoother and faster cuts.

Up to 30 more cuts per charge compared to standard blades. Up to 100 faster cutting compared to standard blades. 60 tooth58 Arbor Carbide tipped for premium, crosscutting in construction lumber and plastics. Thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss. Specially engineered teeth assist to reduce the load put on the tool while cutting.

Up to 100 faster cutting compared to standard blades. Up to 30 more cuts per charge compared to standard blades. Thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss. Special ATAFR alternate top alternate face w raker Carbide tips provide smoother and faster cuts. Specially engineered teeth assist to reduce the load put on the tool while cutting.

Diameter 10- Number of teeth 60 - Bore diameter 58 - Kerf thickness 0.102 - Plate thickness 0.071. APPLICATION for fine finish crosscuts. Glass-smooth finish on miter cuts.. MACHINES compound miter saws.. MATERIAL softhardwood, plywood, Double-Sided Laminate..

DURABILITY Induction-brazed carbide tips for durability and long life. NO MORE WARPING Heat-treated plate eliminates warping. ACCURATE CUTS Precision ground teeth for smooth, accurate cuts. CORROSION RESISTANT Corrosion resistant coating designed to prevent rust.

Premium Micro-grain Carbide produces ultra-sharp cutting edges that dramatically reduce splintering. Precision balanced, laser-cut body provides extremely accurate cuts. Exclusive dampening slots reduce vibration to enhance cutting accuracy. Premium Micro-Grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering.

Specs Arbor 58, Diameter 10, Grind ATB, Hook Angle 15, Kerf .090, Plate .071, Teeth 60. Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance. Positive Hook Angles produce a smoother cut and allow for a faster feed rate. Thin Kerf reduces waste and feeds easier. Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

Precision-ground circular saw teeth for smooth, accurate cuts. Fully-hardened circular saw blade plate runs truer, longer. Heavy-gauge, high-carbon steel construction provides extended circular saw blade life. 180 teeth count with topface grind. 10 blade length with 58 arbor and 0.09 kerf. Precision-ground circular saw teeth for smooth, accurate cuts. Fully-hardened circular saw blade plate runs truer, longer. Heavy-gauge, high-carbon steel construction provides extended circular saw blade life. 180 teeth count with topface grind. 10 blade length with 58 arbor and 0.09 kerf.

UP TO 3X LIFE. Optimized Tooth Geometry Designed For Increased Accuracy. Ultra Sharp Carbide for Clean Cutting.

Sold on Amazon.

High performance TiCo - With Hi-Density carbide specifically designed for each application. Ideal for superior quality rip cuts 34 to 2-34 in wood, plywood OSB.. Perma-SHIELD Non-Stick Coating - It provides protection from heat, gumming, corrosion.. Super Thin Laser Cut Kerf - For fast, durable, and clean cuts, good for your remodeling and demolition needs.. Tri-Metal Shock Resistant - The brazing allows carbide tips to withstand extreme impact for maximum durability..

Clean Cuts - Triple Chip Grind TCG Tooth Design delivers clean, burr-free finishes and virtually eliminates any need for rework, ensuring a superior cut every time. Ideal for cutting aluminum, copper, plastics, brass, and fiberglass.. Impact Resistance - Built with Tri-Metal Shock-Resistant Brazing, allowing the blade to slice through metal materials while withstanding extreme impact, ensuring maximum durability on the job.. Protection - Perma-SHIELD Non-Stick Coating offers protection against heat, gumming, and corrosion, keeping the blade clean and performing at its peak for longer periods.. Accuracy - Designed with Laser-Cut Stabilizer Vents to trap noise and reduce vibration, enhancing both accuracy and durability during use. Suggested applications include remodeling, demolition, electrical work, and plumbing.. Durability - Features specially formulated TiCo Super-Density Micro-Grain Carbide, providing extreme cutting life, reducing wear, and ensuring clog-free cuts for longer-lasting performance compared to standard carbide in metal cutting applications..

For use with miter or table saws. Carbide construction. Ultra-thin kerf design for easy cuts. Shear-face grind design delivers effortless cuts with a reduced amp draw on tools for less material waste and to help maximize tool performance. 10X90 ULTRA FINE FINISH DIABLO.

Specs Arbor 58, Diameter 10, Grind ATB, Hook Angle -5, Kerf .090, Plate .071, Teeth 60. Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance. Negative Hook Angles minimizes climbing for better control. Thin Kerf requires less power and allows for faster feed rate. Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up..

FINE FINISH CUTTING FOR WOODWORKING This 10 inch 80T table saw blade is designed for smooth, clean and accurate cuts in plywood, MDF, hardwood and other wood materials. Ideal for fine finish woodworking where edge quality matters.. CARBIDE-TIPPED 80-TOOTH DESIGN Built with sharp, evenly formed carbide-tipped teeth for clean cutting performance and long-lasting use. Suitable for detailed woodworking tasks that require a smooth finish.. THIN KERF FOR SMOOTHER FEEDING The thin kerf design helps reduce cutting resistance, supports smoother feeding through the material, and helps minimize waste while maintaining clean cutting results.. FOR TABLE SAWS AND MITER SAWS 10-inch diameter with 58-inch arbor, compatible with many table saws and miter saws. Please confirm your machine size, arbor size and specifications before purchase.. IDEAL FOR PLYWOOD, MDF AND HARDWOOD A practical choice for cabinet work, furniture making, trim work and general woodworking projects that require a fine finish blade with consistent cutting performance..

DIMENSIONS 10 inch 80T ATB TCT fine finish wood cutting saw blade with 58 inch arbor, max rpm 6000.. DURABLE OA-BRES circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. Fully Polished and Chrome Plated Surface provides a long-lasting usage life.. EFFECTIVE Incorporates an ATB Alternating Top Bevel offset tooth design, sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results.. APPLICATING General purpose Hard Soft wood cutting saw blade. for long-lasting cuts in plywood, chipboard, multi-board, panels, MDF,platedcounted-plated panels, laminatedBi-laminate plastic, and FRP.. COMPATIBILITY Can used in corded and cordless circular saws, miter saw and table saw..

Tungsten Carbide 2-Pack 10in 40T60T Table Saw Blades, wear resistance, good strength and toughness, extended service life.. Applicable Specifications 2-Pack 10in 40T60T Table Saw Blades Compatible With DEWALT Table Saw Blade, diameter10 in, spindle58 in Max RPM 6000r, for table sawsUsed for fine processing of wood.. Upgrade Sawtooth 2-Pack 10in 40T60T Table Saw Blades Tungsten carbide serrations are tough, Compatible With DEWALT,wear-resistant, long-lasting Cut through such as plastic, hardwood, softwood, plywood, moulding,etc.. Unique Design 2-Pack 10in 40T60T Table Saw Blades with four upgraded grooves to reduce vibration, noise, and heat dissipation, making it safer to use.. ServiceWe offer 24 hour customer service, If you have any product questions, please leave a message with us via Amazon We'll get back to you within 12 hours..

10 Inch Circular Saw Blade for Table SawMiter Saw, 58 arbor15.88mm, 0.098 Kerf2.5mm, 80-Tooth, 2 pack. High-quality plate and thin kerf for fast, smooth, clean cuts. Tungsten carbide teeth provide excellent wear and heat resistance, toughness, longer life. Compatible with DeWalt, Makita, Skil, Metabo 10 Miter Saw and Table Saw. Perfect for slicing through hardwoods, softwoods, plywood, melamine, oak, pine and moulding.

COMBINATION 10x0.1260.087x58 T50 4ATBTCG.

Application for heavy-duty crosscuts. Perfect finish on single-sided laminated panels.. Machines radial arm saws, miter saws, table and special saws.. Material chipboard, MDF, laminates, hardwood and plywood..

For fast crosscuts on wood and plywood. Good rip cut on wood.. To be used on radial arm saws, miter saws, table saws for cutting softhard wood and plywood.. 0.098 kerf thickness, 0.071 plate thickness, 15 Hook Angle, 1 Flat 215 alternate teeth Grind.. Micrograin carbide for long-lasting cutting performance and smooth cut on woodwood products.. Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

0.102 kerf thickness, 0.071 plate thickness, 15 Hook Angle, 1 Flat 4 alternate teeth Grind..

For crosscuts, fine finish on two-sided laminates without using scoring blades. Use on radial arm, miter and table saws for cutting wood, moldings, melamine, laminates, chipboard. 0.094 kerf thickness, 0.063 plate thickness, 10Degree hook angle. Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed. Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion.

Unique Design Featuring a premium VC1 tungsten carbide tip, this 10 saw blade is engineered with an anti-vibration design and large teeth for general-purpose finishing.. High-Quality Carbide Material Crafted from superior carbide, this saw blade delivers an exceptional cutting experience with enhanced sharpness and durability, significantly prolonging its service life.. Versatile Compatibility Designed with a 58 diamond arbor, this saw blade fits both round and diamond hole machines, ensuring stability and compatibility across a range of tools.. Advanced ATB Style The Alternate Top Bevel ATB design increases cutting speed and durability, maximizing accuracy and efficiency. Achieve precise cuts and complete tasks more quickly and effectively.. User Guide Always use safety protection equipment when operating the saw. Store the saw blade in a dry place when not in use to prevent rust and maintain performance..

Key specification ?Diameter 10 inch Teeth 100 TCG Arbor 58 inch Kerf 2.5 mm Features ?Carbide tipped aluminum cutting blade Thin kerf design Non-stick coating Laser-cut expansion slot Stabilizer vents. Tough carbide for durable cutting life ultra-fine grain carbide delivers super clean cutting surface and extreme service life of the blade. Thin kerf design for accurate and fast cut laser-cut hardened steel body and thin kerf design reduce noise and vibration during cutting. Anti-stick coating for smooth cutting experience BLACK ICE shield anti-stick protection reduces friction, heat and corrosion during use of the blade to provide smooth and clean cutting performance. Fits for various materials and applications compatible with corded and cordless saws, ideal for cutting thin aluminum, plastic, composite and non-ferrous metal.

Key specification ?Diameter 10 inch Teeth 50 Arbor 58 inch Kerf 2.4 mm Features ?Carbide tipped combination saw blade Thin kerf design Non-stick coating Laser-cut expansion slot Stabilizer vents. Combination teeth design Each set of 5 teeth separated by 1 large gullet for quick chip removal, ensuring fast ripping and a smooth finish Ideal for ripping cross-cutting of wood and wood composites cutting such as softwood, hardwood, plywood, melamine, compatible with table saws, miter saws. Tough carbide for durable cutting life high-density tungsten carbide for super clean cutting surface and longer cutting life of the blade. Thin kerf design for accurate and fast cut laser-cut hardened steel body and thin kerf design reduce noise and vibration during cutting. Anti-stick coating for smooth cutting experience BLACK ICE shield anti-stick protection reduces friction, heat and corrosion during use of the blade to provide smooth and clean cutting performance.

PRECISE CUTTING PERFORMANCE Features 80 teeth for ultra-smooth, accurate cuts on wood and composite materials. Ideal for fine woodworking and trim projects with a 10 inch saw blade design.. PREMIUM CARBIDE MATERIAL Crafted from high-quality carbide for long-lasting sharpness and durability. Delivers clean cuts and reduces the need for frequent blade changes.. UNIVERSAL COMPATIBILITY Designed to fit most 10 inch miter saws, table saws, and chop saws. Perfect for professionals and DIYers seeking reliable results with a 10in 80 tooth blade.. REDUCED VIBRATION DESIGN Engineered for stability and minimal vibration during operation. Ensures smoother cuts and improved control for precise woodworking tasks.. COMPACT AND LIGHTWEIGHT Compact style with a package weight of 0.812 kg for easy handling and storage. Suitable for both jobsite and workshop use without added bulk..

High-Performance TiCo Carbide - Ensures a sharp and durable cutting edge, designed for both rip cuts and crosscuts in various wood materials.. Perma-SHIELD Non-Stick Coating - Protects the blade from heat, gumming, and corrosion, extending the blade's life.. Super Thin Laser Cut Kerf - For fast, durable, and clean cuts, good for your remodeling and demolition needs.. Tri-Metal Shock Resistant - The brazing allows carbide tips to withstand extreme impact for maximum durability.. Hardened Steel Body - Provides longevity and consistent performance, maintaining a sharp cutting edge for a wide range of applications..

High-Performance TiCo Carbide - Ensures a sharp and durable cutting edge, designed for both rip cuts and crosscuts in various wood materials.. Perma-SHIELD Non-Stick Coating - Protects the blade from heat, gumming, and corrosion, extending the blade's life.. Super Thin Laser Cut Kerf - For fast, durable, and clean cuts, good for your remodeling and demolition needs.. Tri-Metal Shock Resistant - The brazing allows carbide tips to withstand extreme impact for maximum durability.. Hardened Steel Body - Provides longevity and consistent performance, maintaining a sharp cutting edge for a wide range of applications..

Compatible with 10 miter saws, slide miter saws, table saws. Cuts plywood, melamine, MDF, hard soft woods. Little to no sanding rework required.

Shock Resistant Design -azing reinforces carbide tips to withstand high impact, making this blade suitable for demanding jobs..

Ultra-Smooth Finish High tooth count and Hi-ATB geometry deliver clean, precise cuts, minimizing blowout and reducing the need for sanding.. Enhanced Durability TiCo Hi-Density carbide teeth are specially formulated for wood applications, extending blade life and cutting efficiency.. Heat Corrosion Resistance Perma-SHIELD coating protects against gumming, heat buildup, and corrosion, ensuring consistent performance.. Thin Kerf for Fast Cuts Super thin laser-cut kerf .098 enables quick, clean cuts with less material waste, ideal for fine woodworking projects.. Shock Resistant Design Tri-metal shock-resistant brazing reinforces carbide tips to withstand high impact, making this blade suitable for demanding jobs..

Longer Life - Delivering up to 25X longer life, 50X cooler cuts, and 10X faster cuts when compared to standard grinding discs, redefining metal cutting.. Superior Teeth - The specially formulated Cermet II teeth provide high heat tolerance and increased hardness for superior wear and life, enabling fast and efficient cutting of metal and stainless steel.. Precise Cuts - Featuring a special Triple Chip Grind and Perma-SHIELD coating, these blades slice through the toughest of metals to produce precise, burr-free cuts with less sparks.. Cleaner Work - The ability to cut through both metals and stainless steels generates larger chip sizes, producing less dust and airborne contaminants for a cleaner, safer work environment.. Versatile Use - Eliminate the need for individually dedicated saw blades, offering a one-blade solution for ultimate metal cutting performance and unmatched value..

Professional Quality - Engineered to meet the demands of cabinetmakers while withstanding the rigors of professional construction..

10 254mm circular saw blade.. Arbor 58 15.88mm, equipped with detachable diamond-shaped washers.. 32T and 60T, Two pcs Set.. Kerf 2.2mm, ATB tungsten carbide teeth.. Use for cross-cutting chipboard, multi-board, softwood, hardwood, MDF, plywood, laminateBi-laminate plastic, panels, platedcounted-plated panels, and FRP. The blades also can rip cut along the grain..

10 Inch table saw blade ultimate general purpose wood cutting , 40-Tooth ATB, 0.095 Kerf, with 58 Arbor. Ultimate general purpose saw blade has a laser-cut, thin kerf blade design for fast, effortless cuts for rip cuts requiring an ultra-smooth finish or make superior crosscuts in solid wood or plywood. durable, smooth cutting, less vibration and noise, and excellent finish. Made from high-density tungsten carbide for toughness, wear-resistance, and long life. Great for table saws, sliding compound miter saws, and miter saws. Compatible with DeWalt, Skil, Metabo, Makita 10 Inch Miter Saws, Table Saws and other Saws. Corded and cordless saws making this the go-to blade when working at a permanent location or a portable jobsite.. Maximum cutting life and superior performance when creating precise cuts in ripping and cross-cutting applications. FOXBC 10 Inch Saw Blades Professional Woodworking keep for Miter Saws and Table Saws cutting cleanly for the best results..

10 Fine Finish Crosscutting Miter Saw Blade 60-Tooth with 58 Arbor, 0.087 Kerf and ATB ,Fits Most 10-Inch Miter Saws and Table Saws. table saw blades with high-quality thin kerf and plate for fast, durable, smooth cutting, less vibration and noise, and excellent finish. Made from high-density tungsten carbide for toughness, wear-resistance, and long life. Compatible with DeWalt, Skil, Metabo, Makita 10 Inch Miter Saws, Table Saws and other Saws. Ideal for crosscutting oak, pine, melamine, plywood, and moulding.. FOXBC 10 inch saw blade compatible with DeWalt DWE7491RS, DWS713, SKIL MD6305-00, TS6307-00, SPT99-11, Metabo 10 inch table saw and keep your table saw cutting cleanly for the best results..

10 Inch 100-Tooth TCG Thin Aluminum Metal Cutting Saw Blade , KERF 0.095, 58 Arbor. IDEAL for cutting thin up to 18, medium 332-14 and thick 316-716 aluminum metals. Made from high-density tungsten carbide for toughness, wear-resistance, and long life. Laser-Cut Stabilizer Vents for trapping noise and reducing vibration for accuracy and durability. Compatible with DeWalt, Skil, Metabo, Makita 10 Miter, Slide Miter, Table Saws and other Saws. Triple Chip Grind TCG Tooth Geometry for maximum life, speed, and durability, giving clean, burr-free cuts. FOXBC Aluminum saw blade series is ideal for corded and cordless saws when on-the-job cutting non-ferrous metals such as aluminum extrusions, copper pipe, brass plate, etc. keep your saw cutting cleanly for the best results.

10 Inch 80-Tooth Ultra Finish Miter Table Saw Blade, 0.098 Kerf, Wood Cutting with 58 Arbor, ATB. The blades with high-quality thin kerf and plate for fast, durable, smooth cutting, less vibration and noise, and excellent finish. Made from high-density tungsten carbide for toughness, wear-resistance, and long life. Compatible with DeWalt, Skil, Metabo, Makita 10 Inch Miter Saws, Table Saws and other Saws. Ideal for crosscutting oak, pine, melamine, plywood, and moulding.. FOXBC 10 Inch Saw Blades Professional Woodworking keep for Miter Saws and Table Saws cutting cleanly for the best results..

Specs Arbor 58, Diameter 10, Grind ATB, Hook Angle 10, Kerf .116, Plate .098, Teeth 80. Freuds exclusive blend of TiCo Hi-Density Carbide is specifically designed for each cutting application to maximize cutting life and material finish. Alternate Top Bevel ATB 38-degree tooth with positive cutting angle. Freuds own Silver I.C.E. Coating reduces heat, build up, and eliminates rust and corrosion to maximize the life of the blade. Freuds proprietary Perma-Shield non-stick coating reduces blade drag, protects the blade from corrosion and pitch build-up. Anti-Vibration design eliminates movement and reduces vibration for flawless cuts. Tri-Metal Brazing gives the tooth superior bond strength and protects the carbide tooth by giving it increased flexibility and impact resistance. Freuds Hi-Tolerance Precision Plate Grinding Tensioning features a laser cut blade body from 48 Rockwell steel plate the worlds highest quality steel that remains flat and true, over the lifetime of the blade, for ultimate accuracy in picture frames.

Flawless Finish Cuts - Designed for ultra-smooth, chip-free edges in veneered plywood, fine moldings, melamine, laminates, and crosscuts in solid woods, ideal for finish carpentry and cabinetmaking.. Premium TiCo Carbide Blend - Features a high-density TiCo crosscutting blend that maximizes cutting performance, edge retention, and durability, designed to power through tough woods with consistent, clean results.. Hi-ATB Tooth Geometry - High Alternate Top Bevel Hi-ATB tooth design delivers superior shearing action, reducing tear-out and producing clean, polished edges in even the most delicate materials.. Laser-Cut Anti-Vibration Slots - Built-in vibration which drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish.. Perma-Shield Coating - Non-stick Perma-Shield coating reduces friction and heat buildup, prevents pitch and resin accumulation, and protects against corrosion, ensuring longer life and smoother operation without stabilizers..

DIMENSIONS 10 Inch 254mm TCT circular saw blade max 5300 rpm setting, Arbor size 58 inch15.88mm Carbide Teeth 40T60T.. MATERIAL Circular saw blades are made of tough carbide to deliver accuracy and resist bending for durable cutting life. Tungsten carbide teeth provide excellent wear and heat resistance providing fast and efficient removal of chips and swarf.. FEATURES Incorporates an ATB Alternating Top Bevel offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood.. APPLICATION Circular saw blades are made of durable Carbide tipped framing blades delivers accuracy and resists bending.Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF.. QUALITY COMMITMENT KENDO circular saw blade with high-quality tungsten carbide and inlay teeth brazing technology for higher nail impact resistance and longer cutting life. If for any reason you are not satisfied with your purchase, please contact us..

POWERFUL AND PRECISE This 10-inch single bevel compound miter saw features a 15-Amp motor delivering high power for effortless cuts. The power saw generates a no-load speed up to 5,000 RPM, ensuring precise cuts for all your woodworking projects.. USER-FRIENDLY DESIGN The miter saw includes an improved miter scale and controls for accurate adjustments. Its large table saw 10 inch provides better material support, and the vice clamping system secures the workpiece for precision and safety.. LIGHTWEIGHT AND PORTABLE Weighing only 24 lbs, this second generation power saw is easy to maneuver and transport to any job site. The compact design allows for easy storage and increased portability without sacrificing power or performance.. VERSATILE CUTTING CAPABILITIES With a 0-52 miter angle range left and right and an adjustable bevel range of 0-45 left, this compound miter saw offers flexibility. Adjustable bevel stops ensure precision cuts for various woodworking applications.. GO FOR THE METABO HPT EXPERIENCE This durable miter saw comes with the Metabo HPT 5-year warranty. Choose our durable Japanese-engineered power tools to carry out all your professional-grade work, get more at the Metabo HPT store..

Ideal for cutting Plastic, Aluminum and Non-Ferrous Metals. Construction grade carbide teeth provide maximum resistance for longer life. Electrophoretic Coating reduces the rusting and corrosion. TCG Grind for a durable and smooth cut on non-ferrous metals, aluminum, and plastic items. Quality Guarantee, Limited Lifetime Warranty by TOMAX.

ALUMINUM CUTTING This circular saw blade designed for cutting Aluminum Plastic and Non-Ferrous Metals. CUTTING CAPACITY 120-Tooth for fine finish working, maintaining consistent cutting quality throughout its lifespan. BLADE DIMENSIONS Features 10-inch diameter with 2.8mm thickness, perfectly balanced for accurate and stable cutting performance. EASY INSTALLATION Standard 58-Inch 16mm arbor size ensures compatibility with most common saw models for quick blade changes. PROFESSIONAL GRADE Constructed with high-grade carbide material for enhanced durability and consistent cutting results.

PREMIUM DESIGN 10 inch circular saw blade with ultra-sharp carbide teeth for superior cutting precision and smooth finish in woodworking projects. VERSATILE COMPATIBILITY Ideal for miter saws, table saws, and circular saws for various wood cutting applications. BLADE DIMENSIONS Features 10-inch diameter with 2.8mm thickness, perfectly balanced for accurate and stable cutting performance. PROFESSIONAL GRADE Constructed with high-grade carbide material for enhanced durability and consistent cutting results. CUTTING CAPACITY Fine-finish blade optimized for clean, precise cuts in wood materials with minimal splintering and tearout.

SPECIFICATIONDiameter 10 Inch Teeth 2480T Arbor 58 Inch Kerf 2.4 mm RPM 6,000. WIDE RANGE OF APPLICATIONUXACE professional wood cutting circular saw blade delivers extraordinary performance and maximum lifespan. With thin kerf design, hi-density TiCo carbide and 75Cr1 hardened steel body manufactured, this is the blade suitable for anyone looking for smooth and clean cutting experience on softwood, hardwood, plywood, pressure treated wood, MDF, OSB, lumber and laminated using a miter saw or table saw. PROFESSIONAL-GRADE CARBIDEProfessional grade TiCo hi-density carbide tips guarantee high impact resistance and maximum durability. LASER-CUT THIN KERF DESIGNLaser-cut thin kerf design for fast, straight and accurate cuts, saving up to 30 power with excellent cutting efficiency. VIBRATION NOICE REDUCTIONAnti-Vibe Technology effectively reduces vibration and noise for more stable and true cuts. PREMIUM STEEL BLANK MATERIAL75Cr1 hardened steel body ensures longer service life of the blade and super clean cutting surface.

DURABILITY Induction-brazed carbide tips of 10-inch miter saw blade are made for durability and long life. NO MORE WARPING Heat-treated plate eliminates warping. ACCURATE CUTS Precision ground teeth for smooth, accurate cuts. CORROSION RESISTANT Corrosion resistant coating designed to prevent rust.

Thin kerf for fast and smooth cutting action. Computer balanced plate reduces vibration for improved accuracy and better finish. Wedge shoulder design puts more steel behind each tip for increased durability and accuracy.

Tougher tungsten carbide stays sharper longer. Thin kerf for fast and smooth cutting action and The arbor size is 58.. Computer-balanced plate reduces vibration for improved accuracy and better finish. Durable tungsten carbide maintains a true edge. Best used for miter saw and slide miter saw jobs.

DIMENSIONS - Includes 1pc 105832T 1pc 105860T TCT circular saw blade.. APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,platedcounted-plated panels, laminatedBi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain.. MATERIAL - Fully hardened steel blade body delivers accuracy and resists bending and deflection for true cuts.. FEATURES - Incorporates an ATB Alternating Top Bevel offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood.. Tungsten carbide teeth provide excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf..

PRECISION ATAF Alternate Top and Alternate Face tooth design for ultra precision cutting. EFFICIENCY Japanese ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor. ACCURACY Fully hardened and expertly hand-tensioned steel saw plates for true cuts. DESIGN Micro-grain carbide teeth are honed with up to 600 grit for a mirror finish. INCLUDES 10 80T Micro-Polished Miter Saw Blade.

Featuring a 10-inch diameter 254 mm, a 58-inch arbor 15.88 mm and a rating of up to 6000 RPM. Perfect for slicing through both hard and softwoods of all kinds. Ultra-thin 110-inch kerf 2.4 mm provides clean and efficient cuts. Designed with 40 carbide-tipped teeth for general-purpose wood cutting. Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.

Featuring a 10-inch diameter 254 mm, a 58-inch arbor 15.88 mm and a rating of up to 6000 RPM. Perfect for slicing through both hard and softwoods of all kinds. Ultra-thin 110-inch kerf 2.4 mm provides clean and efficient cuts. Designed with 60 carbide-tipped teeth for fine-finish wood cutting. Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.