Size The thread size of 10AN is 78-14 UNF. The AN side is sealed by a 37 degree angle.. Application The swivel fitting is only work with stainless braided and nylon braided hose .. Material Made of aluminum alloy 6061-T6.. Parameter Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. Feature 360 Swivel design for easy assembly. It can be reused and recycle..

Size AN10 78-14 UNF male flare threaded weld bung fitting, pack of 2. Precision CNC machined from mild steel and feature a 37 flared sealing connection. Stepped on weld end to assist mounting. These weld bungs are ideal for use with fuel cells, radiators, oil pans, custom tank fabrication, or any other project that requires custom plumbing. Capable of handling high pressure applications.

Size Thread Size of 10AN PTFE Fitting is 78-14UNF.. Application The PTFE Hose End only work with PTFE fuel line.. Parameter Working pressure 1500PSI. Temperature range -65F-252F.. Seal The AN side is sealed by a 37 degree angle.. Material and Feature Made of aluminum alloy 6061-T6. 360 Swivel design for easy assembly..

Size ID 12 0.52 inch. OD 0.69 inch. Length 10ft. Please measure before purchase Includes as shown in the picture. Parameter Working temperature range -76 to 446 -60 to 230. Maximum working pressure 1,250 PSI. Bursting pressure is 3,750 PSI.. Suitable for Wide Usage The PTFE fuel line is ideal for use in various high-temperature and high-pressure applications.. Suitable for Wide Usage The PTFE nylon braided fuel line is ideal for use in various high-temperature and high-pressure applications.. Notice The PTFE hose is relatively hard and can't be bent or folded in half. Professional installation is highly recommended..

Size NBR fuel hose ID 5816mm, OD 0.9424mm. Length 10 feet. Push lock fittings The thread size of 8an is 78-14UNF.. Parameter Fuel hose Working Pressure 150psi. Burst Pressure 600psi.Temperature Range -40F to 257F.Minimum Bend Radius 6.3160mm. Fittings Max pressure 1500PSI. Temperature range -40 to 248.. Medium Compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Package includes 1Pc 58 30R7 fuel hose 10ft, 2pcs 10AN straight push lock hose end and 2pcs 10AN 90 push lock hose end.. Application The push lock fuel line kit widely used for fuel system,oil cooling,steam emission, etc..

Size The fitting is an AN10 to 12 NPT adapter, and the thread size of the 10AN is 78-14 UNF.. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Sealing The AN side of the flare is sealed at a 37-degree angle, and the NPT thread side is sealed with 60-degree tapered threads.. Application The fitting is widely used in fuel systems, cooling systems, power steering systems, and more.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. The fitting allows easy installation and removal with a wrench..

Size The fitting is an AN10 to 38 NPT adapter, and the thread size of the 10AN is 78-14 UNF.. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Sealing The AN side of the flare is sealed at a 37-degree angle, and the NPT thread side is sealed with 60-degree tapered threads.. Application The fitting is widely used in fuel systems, cooling systems, power steering systems, and more.. Notice To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. The fitting allows easy installation and removal with a wrench..

Banjo thread AN10 78-14 UNF male flare. Bolt thread -10 ORB 78-14 UNF. Banjo thickness 28.5mm. Constructed from 6061-T6 billet aluminum for the banjo and 304 stainless steel for the bolt Anodized finish for strength, durability and anti-corrosion. This assembly is the perfect low-profile solution where standard 90-degree AN fittings are too bulky. It seamlessly connects a -10 ORB port to a -10 AN line at a 90-degree angle, routing fuel or oil efficiently in tight spaces. The banjo can be rotated a full 360 degrees even after installation. This allows for perfect alignment of your AN hose, eliminating stress on the line and ensuring optimal flow for maximum performance. Perfect for use with fuel rails, fuel pressure regulators, surge tanks, turbochargers, power steering systems, etc Safe for use with all types of fuels, including alcoholic fuels.

Size The thread size of the 10AN fitting is 78-14 UNF.. Seal The AN thread of the flare is sealed by a 37-degree angle.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The coupler is made of aluminum alloy 6061-T6 with a black anodized surface.. Feature The 360 swivel design makes it easy to install and helps save time..

Hose ID 916. Hose OD 0.783inch.Length 10feet.. Made of CPE synthetic rubber and nylon braided.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Package includes 6pcs 10an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree and 10an nylon braided fuel line.. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message.Professional installation is highly recommended..

Size 10an female to 58 barb, and that of 10an thread size is 78-14 UNF.. Material made of aluminum alloy, reusable and recyclable.. Max pressure 2000PSI, temperature range -40 to 248.. Please attention that an10 push lock hose barb only compatible with rubber fuel line.. EVIL ENERGY provide 3 angles of 10an hose barb straight, 45degree, 90degree..

10 AN Fuel HoseInner hose Material CPE Synthetic Material Hose Outside Covered with high quality Nylon and Stainless Steel WiresInner Diameter 0.56 14.27mm Outside Diameter 0.82 20.83mm. Working Pressure 500 PSI 34.5 Bar Burst Pressure 2000 PSI 138 Bar Working Temperature -40 F to 350 F. Swivel FittingsMade of Premium Quality T6061 Alloy Aluminum.Removable head for both push-on or twist-lock applications. Nylon and stainless steel braided fuel line kit can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel.. Package IncludeAN-10 Straight Swivel Hose End X2 PCSAN-10 45 Degree Swivel Hose End X2 PCSAN-10 90 Degree Swivel Hose End X2 PCSAN-10 Stainless Steel Nylon Braided Hose X10 Feet.

Size The thread size of the 10AN fitting is 78-14 UNF. The threaded end is sealed at a 37-degree angle. Feature The profile of the hose end is more compact and is suitable for tight spaces. Application The hose fitting works only with stainless steel braided and nylon braided hoses. Material The 10AN 90-degree fitting is made of 6061-T6 aluminum alloy. The bending part is produced through a forging process. Parameter Maximum working pressure 1,500 PSI. Working temperature range -40 to 250 -40 to 121.

Size The thread size of the 10AN male coupler is 78-14 UNF.. Seal The AN thread of the flare is sealed by a 37-degree angle.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The coupler is made of aluminum alloy 6061-T6.. Application The male-to-male flares coupler is usually used in fuel systems, such as extending fuel hoses, connecting lines to fuel pumps, and cooler systems..

Size The fitting is female AN10 to female AN10, and the thread size is 78-14 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40 to 250.. Sealing The AN side of the flare is sealed by a 37-degree angle.. Material The fitting is made of aluminum alloy 6061-T6 with an anodized black surface.. Feature The fitting is designed with a 360 swivel for easy assembly, and it can be reused and recycled..

Size The thread size of the 10AN fitting is 78-14 UNF. The AN side is sealed at a 37-degree angle. Material The hoes end fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -40 to 250. Feature The AN10 150-degree fitting features a unique cutter style and a one-piece full-flow design for smoother flow. Application The AN10 hose end works only with stainless steel braided and nylon braided hoses.

Size This fitting is 10AN to 58 barb. The thread size of the 10AN end is 78-14 UNF. Application The barb fitting works only with rubber fuel lines. Parameter Maximum working pressure 1,500 PSI. Temperature range -40 to 248. Material The 45-degree fitting is made of 6061-T6 aluminum alloy. Installation This 10AN 45-degree fitting is easy to install. It is recommended to use clamps to enhance sealing.

Size The thread size of the 10AN male coupler is 78-14 UNF.. Seal The AN thread of the flare is sealed by a 37-degree angle.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The fitting is made of aluminum alloy 6061-T6.. Application The male-to-male flare coupler is usually used in fuel systems, such as extending fuel hoses or connecting lines to fuel filters, fuel pumps, or cooler systems..

Size The thread size of the AN10 hose end is 78-14 UNF. It is only compatible with 10AN stainless steel and nylon braided hoses. The ID of the 10AN line clamp is 0.75 inch 19 mm. Material The fitting is made of 6061-T6 aluminum alloy with a black anodized surface. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252. Function The 10AN swivel hose end kit includes multiple angled fittings and 10AN unions to meet various installation requirements. The 10AN separator clamp is used to secure and organize lines, keeping your project clean and organized. Application It is widely used in transmission lines, fuel filters, fuel injection systems, cooling systems, and more.

Size The thread size of the 10AN is 78-14 UNF.. Parameter The maximum working pressure is 1,500 PSI, and the working temperature range is -40F to 250F.. Material The fitting is made of aluminum alloy 6061-T6 with a black anodized surface.. Seal The AN side of the flare is sealed by a 37-degree angle.. Feature The 360 swivel design makes it easy to install and helps save time..

Size The thread size of 10AN is 78-14 UNF. The AN side is sealed by a 37 degree angle.. Application The swivel fitting is only work with stainless braided and nylon braided hose .. Material Made of aluminum alloy 6061-T6.. Parameter Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. Feature 360 Swivel design for easy assembly. It can be reused and recycle..

The female AN10 90 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. Can be suitable for competition applications where reduced weight is needed.. 10AN 90 degree swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided CPE fuel hose. They are not compatible with PTFE hose, E85, rubber hose.. These new full flow swivel hose ends swivel 360 to allow for a quick alignment of the hose after assembly. Swivel hose end can be reused and recycle if you do not want them to stay in the original place.. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling.. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

Size The thread size of 10AN and AN10 ORB is 78-14 UNF.. Seal The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring.. Material Made of aluminum alloy 6061-T6 body and NBR rubber O-ring.. Parameter Working pressure 1500PSI. Working temperature-65F-252F. O-ring temperature range -4F-392F.. Application Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc..

10AN to 10AN Fitting ORB. O-ring Seal to Flare - Orb Boss Straight Adapter. Black Anodized - Solid - Quality Fitting - Designed for High Flow. Suitable For Oil Fuel Coolant Water Air Gas - E85 Compatible. Pack Includes 1 Piece Fitting.

Size The thread size of 10an is 78-14 UNF. Material Aluminum alloy 6061-T6. Seal The AN flare is sealed at a 37 degree angle. Parameters Working Pressure 1500PSI. Temperature range -40F to 250F. Application AN10 tee fitting can work with oil, fuel, e85, fluid, coolant and air.

Size AN10 78-14 UNF female swivel to male, 90 degree. Manufactured from lightweight 6061-T6 billet aluminum Anodized finish for strength, durability and anti-corrosion. 37 sealing angle guarantees a positive seal at maximum operating pressures Universal fit for fuel, oil, diesel or water lines. The forged full flow construction has a superior wall thickness and provides an uninterrupted flow. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size The thread size of the 10AN fitting is 78-14 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 10AN 90-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252-53 to 122. Feature The 10AN 90-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Thread size -10 AN male flare to -10 ORB O-ring, pack of 2. Manufactured from lightweight 6061-T6 aluminum. Anodized finish for strength, durability and anti-corrosion. Suitable for oil fuel coolant water air gas, etc. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size The thread size of the 10AN fitting is 78-14 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 10AN 120-degree fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -40 to 250. Feature The 10AN 120-degree fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

Size AN10 78-14UNF female to 38 9.5mm hose barb. Manufactured from lightweight 6061-T6 billet aluminum. Anodized finish for strength, durability and anti-corrosion. These AN to hose barb fittings are designed for a wide range of automotive applications including fuel, oil or water lines. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size The thread size of 10an is 78-14 UNF.. Parameter Max Working Pressure 4000PSI Working Temperature Range -65 to 252.. Material Aluminum alloy 6061-T6, anodized black surface.. Sealing The AN side of the flare is sealed by a 37 degree angle.. Feature Split flow at 60 angle, ideal for any liquid or gas application requiring a high flow separator..

Fuel Pressure Take-off Fitting The fuel pressure take-off fitting is an AN10 male to -10 female with a 18 NPT gaugegage port. The thread size of the 8AN is 78-14 UNF.. Sealing The AN thread of the flare is sealed at a 37-degree angle, and the NPT thread is sealed with a 60-degree taper. It is highly recommended to use sealant or PTFE polytetrafluoroethylene tape on the NPT port.. Material The fitting is made of 6061-T6 aluminium alloy.. Parameter The maximum working pressure is 1,500 PSI. The working temperature range is -40F to 250F.. Application The fitting is widely used in fuel systems to add a fuel pressure gauge or sensor between fuel lines..

Package Include4 x 10AN Straight End Fitting. During the installation,the included accessory o-ring is not a must.Whether it can be used or not depends on your own need.Choosing not to use it won't influence the subsequent installation.. Indutrial QualityThe female Straight End AN8 fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength.Max Working Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. Can be suitable for competition applications where reduced weight is needed.. Unique DesignSwivel design for easy assembly.Please select the corresponding wrench to use.4AN-4S wrench 6AN-6S wrench 8AN-8S wrench 10AN-10B wrench.. Wonderful For Universal Use 10AN Straight End Fitting is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our 10AN fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose,rubber hose.. ServiceIf you have questions of our female AN10 fittings,you can contact us.We value your shopping experience and strive to offer a high-quality product and service..

Size The thread size of the 10AN fitting is 78-14 UNF. The AN side is sealed by a 37 degree angle. Application The swivel fitting works only with stainless steel braided and nylon braided hoses. Material The 10AN straight fitting is made of 6061-T6 aluminum alloy. Parameter Maximum working pressure 1,500 PSI. Working temperature range -65 to 252-53 to 122. Feature The 10AN straight fitting features a 360 swivel design for easy assembly. It can be reused and recycled.

10an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 625psi. Bursting pressure 1875psi. Temperature range -22F to 248F.. Package includes 10pcs 10an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 6pcs 10an hose separator clamp,2pcs 10an to 10an Fitting and 10an braided fuel line Length 10 Feet. Hose ID 0.53. Hose OD 0.79inch.. 10an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Size AN10 78-14UNF male flare, straight. Manufactured from lightweight 6061-T6 aluminum. Anodized finish for strength, durability and anti-corrosion. These bulkhead fittings allow lines to pass safely and securely through firewalls and body panels. All Podavelle fittings and adapters are fully compatible with gasoline and alcohol based fuels.

Size The thread size of 10AN is 18-14 UNF. OD of brab 38 inch.. Material Made of aluminum alloy 6061-T6.. Seal The AN side of the flare is sealed by a 37 degree angle.. Parameter Working pressure 1500PSI Working temperature -65F-252F.. Easy installation Just push the barb end of the fitting into the hose. It is recommended to use clamps to ensure a tight seal..

Size 10AN to 58 inch barb Thread size of 10AN 78-14UNF, Widely used in fuel systems, oil coolers, steam emission setups, and for transitions in fuel, oil, or coolant lines. It is compatible with rubber hoses, including SAE 30R7 NBR. Package include 10AN Push Lock Kit. Contains 6 aluminum straight fittings and 4 x 90-degree elbow fittings black with 10 stainless steel clamps. Material 6061-T6 aluminum construction withstands 1500 PSI and -65F to 252F temperatures suited for most automotiveindustrial environments. Barbed ends designed specifically for standard rubber fuel hose compatibility not for hardline or PTFE. Durable Corrosion Resistant Constructed from Aluminum materials with a sleek black finish. Resists corrosion and withstands demanding automotive or industrial environments. Installation Features convenient push-lock design for quick and tool-free assembly. Simply push the hose onto the barbed end for a reliable, vibration-resistant seal. Notice The clamp can be used for connecting CPE hose, while rubber hose do not require the use of a clamp.

100 QUALITY MATERIALNylon and Stainless Steel Braided CPE Synthetic Rubber The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum. EFFECTIVELYThe fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.10an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on. USEFULInner core CPE has excellent corrosion resistance. It is maintenance precision engineered to increase life.Working Temperature -40 F to 257 F-40C to 125C under most operating. Working Pressure500 PSI. Package Including10pcs 10AN hose fitting 10Ft AN10 Stainless Steel Oil line 6pcs 10AN Hose Separator Clamp 2pcs 10AN male coupler. SATISFACTIONIf you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem.

Size The thread size of 10an is 78-14 UNF. Seal The AN flare is sealed at a 37 degree angle.. Parameter Max Working Pressure 1500 PSI. Working Temperature Range -65 F to 252 F.. Material Made of aluminum alloy 6061-T6, anodized black surface.. Function The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters..

Size The thread size of 10an is 78-14 UNF.. Parameter Max Working Pressure 4000PSI. Working Temperature Range -65 to 252 .. Material Aluminum alloy 6061-T6, anodized black surface.. Seal The AN flare is sealed by a 37 degree angle.. Application Widely used in fuel systems, such as fuel hose extends, return line, fuel cell, firewall, etc..

JIC -10an JIC 10, 78-14 female thread swivel to 10 an hose end pipe connectors 90 Deg elbow forged adapters. Material High Performance Lightweight 6061-T6 CNC Machined Billet Aluminum. Finish Black Aluminum Anodized for Durability and Strength. Application FuelOilGasFluid WaterAir Line. Female an10 equal union tube hose adaptors Specialty AN.

Size Thread size of 10an weld bung is 78-14 UNF.. Material Made of aluminum alloy 6061-T6.. Sealing The AN thread of the flare is sealed by a 37 degree angle.. Parameter Max pressure 1000PSI68.94bar, Operating temperature - 65 to 252.. Note Can not be screwed too tightly when using, otherwise it will deform the 37 degree valve seat and cause leakage..

10an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. 10an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy.. Maximum Working Pressure 625psi. Bursting Pressure 1875psi. Temperature Range -22F to 248F.. Package includes 10pcs 10an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 10an hose separator clamp and 10an braided fuel line Length 20 Feet. Hose ID 0.53. Hose OD 0.79inch.. The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..

Adjustable rangeThis wrench size can be adjusted to 3AN, 4AN, 6AN, 8AN, 10AN, 12AN, 14AN and 16AN.. Material It's made of lightweight 6061-T6 aluminum . Recommended for aluminum fitting, easy to damage for other materials. Advicewrap the wrench's jaws with electircal tape to better protect the fitting wrench.. AdvantageMultisize in one Contact of four opposite sides.. Sizelength 7.2 inch18.5 cm,width 2.7 inch7.1 cm,thickness0.52 inch1.35cm.. DesignFeaturing a curved design with a non-slip handle for a comfortable grip and fit for hand movement..

10AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum working pressure 625psi. Bursting pressure 1875psi. Temperature range -22F to 248F.. Package includes 6pcs 10an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 10an hose separator clamp,2pcs 10an to 10an Fitting and 10an braided fuel line Length 10 Feet. Hose ID 0.53. Hose OD 0.79inch.. 10AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid the hose fittings are made of aluminum alloy..

Aluminum Fuel Shut Off Valve 10AN to 10AN Male Flow Control Cut Off Valves. Black anodized 37 degree sealing angle guarantees a positive seal at maximum operating pressures. Universal fit. such as Oil Fuel Gas Gad Water Fluid Air Line with AN-10 Ends. Made of high performance lightweight aluminum with anodized surface, anti-corrosion and anti-rust, durable for long lifetime. Simple to turn the switch to control it and the surface clearly marked for proper flow direction.

AN10 flare 78-14UNF female thread to 12 inch barb fuel line hose adapters. Material High performance light weight 6061-T6 billet aluminium. Black anodized finish for durability, and long last. Fit. such as Oil Fuel Water Fluid Air Line with AN -10 to Barb 12 inch. JIC 10 an female thread to push on lock hose barb reusable pipe fitting connector adapter.

Size The thread size of 10AN and AN10 ORB .The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring.. Material Made of aluminum alloy body and NBR rubber O-ring. Anodized finish for strength, durability and anti-corrosion. ParameterWorking pressure 1500PSI. Working temperature-65F-252F. O-ring temperature range -4F-392F.. Application Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc..

Size Hose ID 0.53inch Hose OD 0.79inch Length 10 Feet. Please measure before purchase. Pressures Temp Range Maximum Working Pressure 625psi,burst pressure 1875psi Temperature range-22F to 248F-30C to 120C Min bending radius 101.6mm.. Application The braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line.. Material 10AN hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid.. Compatibility Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc..

JIC -10 AN 78 x 14 Female Swivel to 2 x -10 AN 78 x 14 male flare thread hose coupler union tube Y adapters fitting. Black Anodized Finish for Long Last, Strength and Durability. Made of High Performance Lightweight 6061-T6 CNC Machined Billet Aluminum Material. These fittings are designed to match up with common hose and hose ends, They assure positive sealing and come in a corrosion-resistant finish. Adapters are offered in standard thread, metric thread and thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components.

Package Includes 18 x AC fitting 6 8 10, 180 90 45, 4 x AC fitting with R134a pressure valve 8 10,180 90, 18 x O-ring 6 8 10, 2 x Clamp. Thread Size 58-18UNF, 34-16UNF, 78-14UNF For standard hose.. Material Combining an aluminum tube with zinc-plated iron components, these AC fittings offer exceptional strength and corrosion resistance for demanding environments.. O-ring The O-ring beadlock design ensures a secure, leak-free connection to hoses and equipment for easy installation.. Air Conditioning Fitting Set The fitting set includes straight180, 90, and 45 fittings, along with fittings for a wide range of applications, simplifying your sourcing process..

Superior RV Tank Dumping Increase your RV drain hose length with Camcos RhinoFLEX 10' Camper Sewer Hose Extension. Built tough flexible, this RV septic hose extension simplifies grey and black water disposal during your camping adventures.. Compatibility This convenient hose extension works with RhinoFLEXCamco items 39764, 39767, 39742, 39770, plus other camper drain hoses with bayonet fittings, making it easy to use with multiple brands.. Extension Includes This product includes 1 10' RhinoFLEX sewer hose extension with 1 pre-attached lug and bayonet fitting. Enhance your RV dumping setup with this RV waste hose extension.. Built Flexible Tough Constructed with 23 mils of durable polyolefin and reinforced with steel wire, the RhinoFLEX RV black water hose can bend maintain its shape for reliable, long-lasting use.. Compact Design The 10' RV waste hose compresses to just 39 with the fittings for efficient RV sewer hose storage. It neatly stores in your camper's 4 square bumper.. Patented Design Made in the USA This sewer hose for RV campers is proudly manufactured in the USA using quality global materials for superior durability and performance. The patented design ensures exceptional craftsmanship and quality..

Size AN10 78-14 UNF female flare to 58 barb, 90 degree. For use with 58 ID push-on rubber fuel hose only. WILL NOT work with stainless braided hose, nylon braided hose, or PTFE hose. Manufactured from lightweight 6061-T6 billet aluminum Anodized finish for strength, durability and anti-corrosion. Podavelle push lock hose end fittings feature a one-piece design that eliminates two brazed joints, minimizing potential leakage and improving flow and appearance. Hose barb dimensions are per SAE standards and they have a tapered nipple for easy alignment and installation. Fully compatible with all oil, fuel, coolant, e85, race fuel, and power steering fluid.

Size 12AN 1-116-12 UNF female to 10AN 78-14 UNF Male. Manufactured from lightweight 6061-T6 aluminum. Anodized finish for strength, durability and corrosion resistance. 37 sealing angle guarantees a positive seal at maximum operating pressure. Application - Universal, fits all oil fuel water fluid air line, etc.

Package include 2pcs 10AN 90 Degree Push Lock Hose Fitting. 10AN to 58 inch barb. Thread size of 10an 78-14UNF. The barb fitting only work with rubber fuel line. Material 6061-T6 aluminum alloy. Working pressure 1500PSI. Temperature range -40 to 248. Easy to install. It is recommended to use clamps to enhance sealing.

Package Includes 1 x CPE Nylon Braided Line, 2 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 1 x Hose Separator Clamp.. Hose ID 0.56 inch14.2mm. Hose OD 0.78 inch20mm. Length 10 feet. Please measure before purchase.. Made of CPE synthetic rubber and nylon braided. Fittings included are not compatible with PTFE Hose, E85 and Rubber Hose.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Professional Installer is Highly Recommended. Free replacement without return if leak..

Package include 2pcs 10AN Straight Push Lock Hose Fitting. 10AN to 58 inch barb. Thread size of 10an 78-14UNF. The barb fitting only work with rubber fuel line. Material 6061-T6 aluminum alloy. Working pressure 1500PSI. Temperature range -40 to 248. Easy to install. It is recommended to use clamps to enhance sealing.

Package Included 2PCS 10AN to 10AN Male Flare Coupling Union Adapter. Thread size of 10AN male coupler 78-14 UNF, can use to splice or extend a line, works with female thread fitting.. Work temperature -65 to 252 degree F. Max pressure 1500PSI. Ultimate torque 50N.. Works with swivel fitting, push lock fitting and female AN fittings. Please match the correct size.. For fuel system, such as fuel hose extend, line connect to fuel filter, fuel pump and cooler system..

Package Included 2PCS 10AN 45Degree Swivel Hose End Fittings.. Thread size of 10AN 78-14 UNF. The AN side is sealed by a 37 degree angle.. Material 6061-T6 aluminum alloy.. Max Working Pressure 1500PSI. Working Temperature Range -65 to 252 -53 to 122.. Compatible with nylon braided CPE fuel hose. Not for PTFE hose, E85, rubber hose..

Nylon Braided CPE Fuel Line Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.. Maximum Working Pressure psi 500 psi. Bursting Pressure psi 2000psi. 10AN nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances.. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Universal Application The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Package Includes 1 x 10AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..

Size -10AN male flare to AN10 male thread with orb adaptor. Made of High Performance Lightweight 6061-T6 CNC Machined Billet Aluminium. Universal fit. such as Oil Fuel Water Fluid Gas Air line female hose Ends. Surface treatment black anodized finish for durability and strength. 10AN flare to 10 O-ring ORB male fuel pump rail high flow inline pipe connector fittings.

AN10 78-14, JIC 10 female to 916-18, JIC 6 6AN male flare thread reducing tube pipe connector. Made of high performance lightweight 6061 T6 aluminummaterial, billet AL CNC machined to aerospace grade. Black anodized finish for durability and strength. Universal fit such as Gas, Oil, Fuel, Water, Fluid or Air Line with Female AN10 to Male AN6 Ends. Tight secure leak free connection, AN female to male flare reducing expanding union tubing adaptor.

JIC -10 AN male thread 78-14 boss plug with NBR o-ring, black anodized finish for durability and strength. Made of high performance lightweight 6061-T6 cnc machined billet aluminum material. AN10 ORB straight thread plug, can be reusable and long life time. Precision machined to ensure precise thread engagement. Universal Using for Braided Fuel Lines Hose, Oil, Fuel, Water, Fluid and Air Line.

Straight -10AN Male Weld Bung. 6061 ALUMINUM. Can be used for most automotive needs, such as Fuel, Oil, Gas, Water, Coolant, Air, and more.. QTY2 Pieces.

Use these fittings to adapt a -10 AN hose end to a 12 NPT taper thread port. 37 degree flare fitting automotive standard. Machined aluminum finish. Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum. See thread chart photo in this listing to identify your fitting size.